Error installing Images for 3.2 into XE

I am receiving the following error messages when I am upgrading APEX 2... to Apex 3.2 in Oracle XE.
The basic upgrade completed...and I changed the admin password.
When I attempt to load the images...this is what happens:
@apxldimg.sql C:\temp
PL/SQL Procedure successfully completed
directory created.
declare
ERROR at line 1
ORA-2228: file or LOB operation FILEOPEN failed
the system cannot find the path specified.
ORA-06512: at "SYS"."DBMS_LOB" , line 523
ORA-06512: at "SYS"."XMLTYPE", line 287
ORA-06612: at line 15
PL/SQL Procedure successfully completed
PL/SQL Procedure successfully completed
commit complete.
timing for load images
Elapsed: 00:00:00.29
Directory dropped
As you can see, the images were NOT loaded...can anyone help? I've tried moving the folder to different locations and get the same error when I try different paths, quotes, and double quotes. This is done on a Windows XP sp2 machine.
When I try to login to APEX, the login page does not respond to the login button.
Thanks
Lyle

Okay..I found the answer...yes..in this forum
I needed to move the extract file to C:\apex
then issue the command @apxldimg.sql c:\
And this worked.
thanks for your help!~

Similar Messages

Error installing software for M476dw on Windows 7 x64 - DIFxServiceClient.CheckStatus(): Exception

I'm unable to install the software for the M476dw on a Dell M4700 laptop running Windows 7 Ultimate x64. I receive the following error:  The install log file shows the following error: 18:00:35.7690 Information InstallManager.get_PrepareToInstallPercentComplete(): Prepare to install percent complete = 73
18:00:35.7690 Verbose      CSIViewModel.PagePropertyChangedHandler(): >>>>>>> Property Raised - CurrentPercentage
18:00:35.7690 Verbose      CSIPageViewModelBase.CheckForUserError(): >>> User Error is NOT present - Continuing Normally18:00:35.7690 Information DriverPDUEngine.ProcessAction(): DIFx action received.
18:00:35.7690 Information DriverPDUEngine.HandleDIFXAction(): DIFx Command: DriverPackagePreinstall
18:00:35.7690 Information DriverPDUEngine.DriverPackagePreInstall(): Entry.
18:00:35.7690 Information DriverPDUEngine.DriverPackagePreInstall(): Preload Driver INF file list count = 1
18:00:35.7690 Information DriverPDUEngine.DriverPackagePreInstall():    INF File: ..\\hpbuio100l.inf
18:00:35.7690 Information DriverPDUEngine.DriverPackagePreInstall(): Tested infFile. name:                       ..\\hpbuio100l.inf
18:00:35.7690 Information DriverPDUEngine.DriverPackagePreInstall(): Tested infFile. m_installDriverInfFileName:
18:00:35.7690 Information DriverPDUEngine.DriverPackagePreInstall(): Tested infFile. isPrinterDriver: True
18:00:35.7790 Information DifxHandler.DriverPackagePreInstall(): Entry.
18:00:35.7790 Information DifxHandler.DriverPackagePreInstall(): Calling DIFxServiceClient.DriverPackagePreInstall(): file = ..\\hpbuio100l.inf
18:00:35.7790 Information DifxHandler.DriverPackagePreInstall(): Calling DIFxDriverPackagePreInstall(): file = ..\\hpbuio100l.inf
18:00:35.7790 Information DIFxServiceClient.WaitForInitialCreateChannel(): Checking to see if the Channel has been created.
18:00:35.7790 Warning      DIFxServiceClient.FixChannel(): ServiceMarshaller is Not Running.
18:00:35.7790 Information DIFxServiceClient.DIFxDriverPackagePreInstall(): Could not FixChannel, will start SM & try to fix channel again
18:00:35.7790 Information ServiceMarshallerProcessManager.StartService(): Starting Service with EventName: Global\hpbcsiInstallerSMEvent
18:00:35.7790 Information DIFxServiceClient.StartServiceMarshaller(): Started ServiceMarshaller
18:00:35.7790 Information DIFxServiceClient.StartServiceMarshaller(): Creating the channel for the first time. This will be done on a seperate worker thread.
18:00:35.7790 Information DIFxServiceClient.CreateChannel(): Entering CreatingChannel()
18:00:35.7790 Information DIFxServiceClient.WaitForInitialCreateChannel(): Checking to see if the Channel has been created.
18:00:35.7790 Information DIFxServiceClient.CheckStatus(): Checking status of Service
18:00:35.7790 Information DIFxServiceClient.CreateChannel(): Creating Channel
18:00:35.7790 Information DIFxServiceClient.CreateChannel(): Done Creating Channel
18:00:36.7910 !ERROR!      DIFxServiceClient.CheckStatus(): Exception: ServiceProxy was not ready: There was no endpoint listening at net.pipe://localhost/DIFxService that could accept the message. This is often caused by an incorrect address or SOAP action. See InnerException, if present, for more details.
18:00:36.7910 Information DIFxServiceClient.FixChannel(): ServiceMarshaller did not respond
18:00:37.7911 Information DIFxServiceClient.CheckStatus(): Checking status of Service
18:00:37.7911 !ERROR!      DIFxServiceClient.CheckStatus(): Exception: ServiceProxy was not ready: There was no endpoint listening at net.pipe://localhost/DIFxService that could accept the message. This is often caused by an incorrect address or SOAP action. See InnerException, if present, for more details.
18:00:37.7911 Information DIFxServiceClient.FixChannel(): ServiceMarshaller did not respond
18:00:38.7921 Information DIFxServiceClient.FixChannel(): Oops, channel is faulted, recreating
18:00:38.7921 Information DIFxServiceClient.FixChannel(): Channel is fixed I've had a case open with HP for a couple weeks now (Case IDs 4651759504, 4651803999, 4651855408) but has been a struggle to even get them to escalate to level 2, so I'm not hopeful at this point. I've tried using msconfig to boot up with mininal services, I've tried manually installing all the packages (the printer installs fine, but I don't get the network scan device). tries using Microsoft FixIT, tried the HP print troubleshooter, and nothing gets me past that error screen. Has anyone run into this, and more importantly knows how to solve it?

I'm unable to install the software for the M476dw on a Dell M4700 laptop running Windows 7 Ultimate x64. I receive the following error:  The install log file shows the following error: 18:00:35.7690 Information InstallManager.get_PrepareToInstallPercentComplete(): Prepare to install percent complete = 73
18:00:35.7690 Verbose      CSIViewModel.PagePropertyChangedHandler(): >>>>>>> Property Raised - CurrentPercentage
18:00:35.7690 Verbose      CSIPageViewModelBase.CheckForUserError(): >>> User Error is NOT present - Continuing Normally18:00:35.7690 Information DriverPDUEngine.ProcessAction(): DIFx action received.
18:00:35.7690 Information DriverPDUEngine.HandleDIFXAction(): DIFx Command: DriverPackagePreinstall
18:00:35.7690 Information DriverPDUEngine.DriverPackagePreInstall(): Entry.
18:00:35.7690 Information DriverPDUEngine.DriverPackagePreInstall(): Preload Driver INF file list count = 1
18:00:35.7690 Information DriverPDUEngine.DriverPackagePreInstall():    INF File: ..\\hpbuio100l.inf
18:00:35.7690 Information DriverPDUEngine.DriverPackagePreInstall(): Tested infFile. name:                       ..\\hpbuio100l.inf
18:00:35.7690 Information DriverPDUEngine.DriverPackagePreInstall(): Tested infFile. m_installDriverInfFileName:
18:00:35.7690 Information DriverPDUEngine.DriverPackagePreInstall(): Tested infFile. isPrinterDriver: True
18:00:35.7790 Information DifxHandler.DriverPackagePreInstall(): Entry.
18:00:35.7790 Information DifxHandler.DriverPackagePreInstall(): Calling DIFxServiceClient.DriverPackagePreInstall(): file = ..\\hpbuio100l.inf
18:00:35.7790 Information DifxHandler.DriverPackagePreInstall(): Calling DIFxDriverPackagePreInstall(): file = ..\\hpbuio100l.inf
18:00:35.7790 Information DIFxServiceClient.WaitForInitialCreateChannel(): Checking to see if the Channel has been created.
18:00:35.7790 Warning      DIFxServiceClient.FixChannel(): ServiceMarshaller is Not Running.
18:00:35.7790 Information DIFxServiceClient.DIFxDriverPackagePreInstall(): Could not FixChannel, will start SM & try to fix channel again
18:00:35.7790 Information ServiceMarshallerProcessManager.StartService(): Starting Service with EventName: Global\hpbcsiInstallerSMEvent
18:00:35.7790 Information DIFxServiceClient.StartServiceMarshaller(): Started ServiceMarshaller
18:00:35.7790 Information DIFxServiceClient.StartServiceMarshaller(): Creating the channel for the first time. This will be done on a seperate worker thread.
18:00:35.7790 Information DIFxServiceClient.CreateChannel(): Entering CreatingChannel()
18:00:35.7790 Information DIFxServiceClient.WaitForInitialCreateChannel(): Checking to see if the Channel has been created.
18:00:35.7790 Information DIFxServiceClient.CheckStatus(): Checking status of Service
18:00:35.7790 Information DIFxServiceClient.CreateChannel(): Creating Channel
18:00:35.7790 Information DIFxServiceClient.CreateChannel(): Done Creating Channel
18:00:36.7910 !ERROR!      DIFxServiceClient.CheckStatus(): Exception: ServiceProxy was not ready: There was no endpoint listening at net.pipe://localhost/DIFxService that could accept the message. This is often caused by an incorrect address or SOAP action. See InnerException, if present, for more details.
18:00:36.7910 Information DIFxServiceClient.FixChannel(): ServiceMarshaller did not respond
18:00:37.7911 Information DIFxServiceClient.CheckStatus(): Checking status of Service
18:00:37.7911 !ERROR!      DIFxServiceClient.CheckStatus(): Exception: ServiceProxy was not ready: There was no endpoint listening at net.pipe://localhost/DIFxService that could accept the message. This is often caused by an incorrect address or SOAP action. See InnerException, if present, for more details.
18:00:37.7911 Information DIFxServiceClient.FixChannel(): ServiceMarshaller did not respond
18:00:38.7921 Information DIFxServiceClient.FixChannel(): Oops, channel is faulted, recreating
18:00:38.7921 Information DIFxServiceClient.FixChannel(): Channel is fixed I've had a case open with HP for a couple weeks now (Case IDs 4651759504, 4651803999, 4651855408) but has been a struggle to even get them to escalate to level 2, so I'm not hopeful at this point. I've tried using msconfig to boot up with mininal services, I've tried manually installing all the packages (the printer installs fine, but I don't get the network scan device). tries using Microsoft FixIT, tried the HP print troubleshooter, and nothing gets me past that error screen. Has anyone run into this, and more importantly knows how to solve it?

Error installing SP1 for WLS 6.0 on Windows NT

I'm getting the following error dialog box when I try to install sp1 for
Weblogic server 6.0 on Windows NT :
WebLogic Server Service Pack 1 Installation failed.
You do not seem to have WebLogic Server 6.0 installed for BEAHOME
c:\bea
I do have WLS 6.0 installed under c:\bea. The server is running as
well.
The only thing I might have done differently than most others is that I
first uninstalled the existing WLS 6.0 on my machine and then
re-installed WLS 6.0 before trying to install SP1. But that shouldn't
really matter.
Is the SP1 installer looking for something in the registry?
Any help would be appreciated.
Thanks
Shriniwas

Thanks Ginny. That's what the problem was.
- Shriniwas
Ginny Peterson wrote:
>
Hi Shriniwas,
Make sure that the "level" attribute on the "release" element in the
registry.xml file is set to "6.0" not "6.0 Beta". The registry.xml file is
under the bea install directory. This problem may happen if the beta
version had been previously installed and then the GA release was installed
later.
- Ginny
<[email protected]> wrote in message news:[email protected]..
I'm getting the following error dialog box when I try to install sp1 for
Weblogic server 6.0 on Windows NT :
WebLogic Server Service Pack 1 Installation failed.
You do not seem to have WebLogic Server 6.0 installed for BEAHOME
c:\bea
I do have WLS 6.0 installed under c:\bea. The server is running as
well.
The only thing I might have done differently than most others is that I
first uninstalled the existing WLS 6.0 on my machine and then
re-installed WLS 6.0 before trying to install SP1. But that shouldn't
really matter.
Is the SP1 installer looking for something in the registry?
Any help would be appreciated.
Thanks
Shriniwas

Error installing Driver for audio device in MS-6585 Motherboard

Hi,
I have MS-6585 Max L motherboard. I installed windows 2000 with SP4. When I tried to install driver for the audio device, it always fails with the following error.
An error occurred during the installation of the device.
The data is invalid.
And in the Device status in the properties menu
The drivers for this device are not installed. (Code 28)
I tried to download the latest driver using the "Live Update" and it didn't help. I tried few other options suggested in the web.
The usual cause of this problem in Windows 2000/XP systems is Registry keys that are set as read-only.
From the Start menu, click Run and enter RegEdit to run the Registry Editor. Open the following - Keys => HKey_Local_machine => System => CurrentControlSet => Enum => PCI.
You will see several keys in this form - Ven_xxxx - where xxxx represents a string such as - 1102&Dev_004&Subsys_00011103&Rev_04.
In each of these folders there is another folder that has a long numerical name. Open each of these folders, and look for the DeviceDesc entry that matches the type of hardware that you are trying unsuccessfully to install. Use the right mouse button to click on the Ven_xxxx entry for that device, and click Permissions. If it is set to read-only, then that is the cause of the problem. To rectify it, change it to Allow Full Control.
I'm stuck and I am not sure what else to try. Its not clear to me where the problem is. Is there any log I can look? Any other suggestions please
BTW, It used to work..I had to reinstall windows 2000 and after the clean/format reinstallation it stopped working.
thanks for any help
Suresh

It might be that the drivers are for WinXP. Are you 100% sure they are for 2000? Can you get a copy of XP, it would prabobly solve youre problem.

Error installing iTunes for windows 8 64 bit

I can't install iTunes 64 bit in my new laptop. Installatione give me this error:
Error installing assembly "Microsoft.VC80.CRT.type="win32".version="8.0.50727.6195".publicKeyToken="win32 ".version="8.0.50727.6195".publicKeyToken="1fc8b3b9a1e18e3b".processorArchitectu re="x86". ..........
Anyone can help me?
Thank's
Ben

No, I have windows 8 64 bit installed,; however I tried also with 32 bit version, but when I start the installation, a massage appears saying that I'm trying to install a 32 bit version while I need to download and install 64 bit version! However thank's

I can't install Bundle for MS Office into my Macbook Pro. I've bought it but once I start to install it says "An error has occurred" but it doesn't tell me what's wrong.

I've bought the Bundle however, it won't fully install. It keeps on saying "error has occurred" but it doesn't tell me what's wrong. I have a new harddrive in my computer so it's not like I don't have enough space.

The newest version I think? Idk it's the only version on the APP store. I also have the newest version of OSX that I just installed. I thought maybe because I hadn't installed the newest OSX version that it wouldn't work so I installed it and still nothing.

ICM AW error installing tomcat for Reskilling tool

Wondering if anyone has seen this before. I am installing some new AW/HDS for a client and keep running into the same error. When i choose to enable the re-skilling tool, the system is having trouble creating the service account for tomcat and installing it as a service. I don't think it is a ad rights issue as the install has no issues creating the distributor account. the error from the setup log is:
06/18/2010 14:59:12 Installing Tomcat 5.5
06/18/2010 14:59:12 Installing Tomcat: CommandLine:C:\CDW\CCE_ICME_7_5_1\apache-tomcat-5.5.25.exe /S /D=C:\icm\tomcat
06/18/2010 14:59:25 Running command: C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\ngen.exe install C:\icm\bin\ServiceAccountManager.exe
06/18/2010 14:59:26 Creating Tomcat Service Account using Service Account Manager
06/18/2010 14:59:26 SAM - INFO:
06/18/2010 14:59:26 SAM - INFO: Setup Processing -- instance: chglb serviceType: Tomcat
06/18/2010 14:59:27 SAM - INFO: Dynamic Reskilling = 1
06/18/2010 14:59:27 SAM - INFO: Found Instance: chglb
06/18/2010 14:59:27 SAM - INFO: Instance -- GetServices() -- queryString: SELECT Name, DisplayName,StartName,State, Started, StartMode,SystemName FROM Win32_Service WHERE (DisplayName = 'Apache Tomcat') OR(DisplayName LIKE 'Cisco ICM %' AND (DisplayName LIKE '% chglb %' AND (DisplayName Like '% Logger%' OR DisplayName Like '% Distributor%')))AND NOT (DisplayName Like '%DUMMY%')
06/18/2010 14:59:27 SAM - INFO: Instance: chglb Service: Cisco ICM chglb Distributor
06/18/2010 14:59:27 SAM - BEGIN EXCEPTION INFO: ...
06/18/2010 14:59:27 SAM - Exception: "Service object not found for ServiceType: Tomcat" Type: ServiceAccountManager.AppException Source: ServiceAccountManager
06/18/2010 14:59:27 SAM - Exception: Source: ServiceAccountManager
06/18/2010 14:59:27 SAM - Exception: Stack: ServiceAccountManager.AppException.Throw(String message, Object[] var)
06/18/2010 14:59:27 SAM - Exception: Stack: ServiceAccountManager.Commandline.Execute(CmdType cmdType)
06/18/2010 14:59:27 SAM - Exception: Stack: ServiceAccountManager.Program.MainEx()
06/18/2010 14:59:27 SAM - Exception: ExitCode: -1
06/18/2010 14:59:27 SAM - END EXCEPTION INFO: ...
06/18/2010 14:59:28 C:\WINDOWS\system32\cscript.exe "C:\CDW\CCE_ICME_7_5_1\install4iis.js" "C:\icm\tomcat\bin\i386" "C:\icm\tomcat" completed successfully
06/18/2010 14:59:59 C:\j2sdk1.5.0_14\bin\java -cp C:\icm\bin Unzip C:\icm\bin\ipccAdmin.zip C:\icm\tomcat\webapps completed successfully
06/18/2010 14:59:59 W3SVC virtual root path is C:\Inetpub
06/18/2010 14:59:59 IISMetabase entry w3svc\connectiontimeout is set to 600
06/18/2010 14:59:59 W3SVC virtual root path is C:\Inetpub
06/18/2010 15:00:00 W3SVC virtual root path is C:\Inetpub
06/18/2010 15:00:02 C:\icm\tomcat\webapps\uiroot\WEB-INF\properties\default\ipccAdmin\client.properties File is modified to insert JDBC details
06/18/2010 15:00:02 Removing old AT jobs that match (c:\icm\chglb\aw\bin\purgeold.bat)
06/18/2010 15:00:02 Removing old AT jobs that match (c:\icm\chglb\aw\bin\purgedist.bat)
06/18/2010 15:00:02 Adding AT job, at 1:05 daily, command line = cmd /C "c:\icm\chglb\aw\bin\purgeold.bat 30"
06/18/2010 15:00:02 Job successfully added, id = 1
06/18/2010 15:00:02 Adding AT job, at 1:05 daily, command line = cmd /C "c:\icm\chglb\aw\bin\purgedist.bat 30"
06/18/2010 15:00:02 Job successfully added, id = 2
06/18/2010 15:00:02 Message 5701 : Changed database context to 'chglb_awdb'.

I have not found the source of the issue, but after trolling the internets for other people who had issues installing tomcat i did find a workaround. step one was to manually install Tomcat from the ICM install disk by running the following command:
\Apache-Tomcat-5.5.25.exe /D=C:\ICM\Tomcat
The tomcat install will run and will encounter an error about halfway through saying to check Security settings or permissions, Choose Ignore.
Uninstall Tomcat
Re-Boot
Re-install Tomcat with the command %install CD Directory%\Apache-Tomcat-5.5.25.exe /D=C:\ICM\Tomcat
tomcat should install without any issues and you should see tomcat running as a service now
Uninstall Tomcat
Re-boot
Re-run ICM install and choose re-skilling tool
Install should complete without issue.

Runtime error installing driver for photosmart C6380 on Windows 7 Professional 64-bit machine

I have an HP Photosmart C6380 All-in-one printer networked to home network and connected to a laptop (hardwire) with Windows 7 Professional 64-bit operating system.
Downloaded driver from HP site and receive message:
Runtime Error
Program:c:\USERS\.....\AppData\Local\Temp\7xS374E\SETUP.exe
Any suggestions?
I can print, but cannot use other all-in-one functions

Hi HW65,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
Sorry to hear that you are getting errors when attempting to install the HP Software and Drivers for your printer.
Please remove any cables that you have connected to the printer with the exception of the power cable. Please make sure you have the power cable connected direct to a wall outlet and NOT a power bar/strip. Here is a document that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. Note that the printer in the document is a LaserJet printer and this is only used as an example and that the document is meant for HP products in general.
Please remove the Printer from the computer with the use of the uninstall utility that can be located in the All Programs menu in the HP folder under the model of your printer.
Please click on the following link to download and install the printers HP Photosmart C6300/6324 All-in-One Printer series Full Feature Software and Driver. Please save the file to your desktop so that it creates it's own Icon.
Once the download is complete, double click the Icon and follow the instructions. Please do NOT connect any cables to the printer until the installation prompts you to do so.
If you have any other questions or any concerns, please feel free to write me back.
Thanks for your time.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Error installing iTunes for Windows

While installing iTunes 7.2 for Windows(XP), I encountered the Error: 1921.Service iPod Service (iPod Service) could not be stopped.
I can not even uninstall the iTunes(4) that I already have on this computer, for the same reason.

that can happen sometimes if the itunes installer is having a hard time shutting down either itunes or quicktime (or applications using quicktime) prior to the install. so let's try a "download, restart, then install strategy."
leave your ipod unplugged.
download and save a copy of the itunes installer to your hard drive. (do not run the install on line, and do not start the install by clicking on the iTunesSetup.exe (installer) file just yet.)
iTunes 7.1.1.5 Installer
shut down running applications and restart the PC.
do not open any other applications prior to attempting the iTunes install. switch off antivirus and antispyware applications prior to the install.
now start the install by doubleclicking the iTunesSetup.exe file.
does the install go through properly this time?

Errors installing update for Reader

I tried to install an update on my PC for Reader and received an error msg 1321 or 1301 about authority to access a file location. I uninstalled and reinstalled (tried) and now I have a blue screen and windows will not open. I've tried several troubleshooting ideas and now will have to resort to taking it in to be looked at. Now I have a msg on laptop to install an update. I'm a little hesitent to do this. Any ideas?

I do not think that an Adobe Reader update can cause a blue screen (BSOD); that is usually caused by a much heavier issue. Did you install the update under an Adminitrator user? If not, that could cause access violation errors. But these could also have been caused by a damaged hard disk.
I wouldn't worry about the update on your laptop; go ahead and install it.

Audio CD burning error- I opted for importing songs into iTunes as MP3

Hi,
Before I started importing songs into iTunes, I chose int eh iTunes preferences to import all songs as MP3, as I wanted the option of being able to burn CDs to play on my car MP3 player.
When I tried to burn a CD, I got an error message that these songs could not be burnt onto the CD. This had the option where I could see all the errors and the list was of all the songs that I was trying to burn.
BTW, I created a new playlist, dragged the required songs to this playlist from the library and pressed the burn disc option.
What am I doing wrong? Could it be that the drive is faulty?

First of all, how long is the total time of all songs? If it is more than 80 minutes, you can't record to the CD as an audio CD. If that is the case, and you say you have an MP3 cd player in your car... you might want to try burning to the disc as an MP3 CD. Go to iTunes preferences, then click "Advanced," then "Burning" and you'll see an option for "MP3 CD." Click that, and then when you burn the disc, you can put as many songs as will fit onto the disc.
Also, rewritable CDs aren't any better... as a matter of fact, a lot of audio CD players can't read them. A regular CD-R should be fine, even one rated at 40x speed.
Zeb

How to download install images for previous CS purchase

I have tried to find the answer and am unable yo contact support so your payience and help is appreciated
I can no longer afford/justify the Creative cloud as it is a "just to keep my hand in" in my retirement so want to reinstall CS5.5 which the Adobe site shows I have purchased. The last physical CD purchase was CS4 and I no longer have a CD drive so need to download the images to re-install.
Your help would be a wonderful thing
Greg

http://prodesigntools.com/tag/ddl
Mylenium

"There were errors installing the software. Please try again"

I have decided to sell my iMac and G4 iBook, in order to buy a Macbook Pro. I have two people interested, but only if both computers are formatted and as they were when they left the factory.
I erased all my files from both computers, leaving just the system files. I placed the instalation disk for OS X into my iMac (The disk that came with it) and selected instal. I chose the option to delete the current settings and instal a fresh version of OS X.
I hope that makes sense so far.
Anyway after a while, disk 1 had finished, and I was told to insert disk 2. I inserted disk 2, only for half way through the instal process, to be greeted by "There were errors installing the software. Please try again". I have now tried 14 times. I have officially given up.
I have searched these forums for an answer, but it seems as though other people have done things such as, installing other software, or hardware, and that is the cause of the problem. However I have done none of the above. I have tried searching the Mac Support pages, with no luck.
Can anyone help?

I suggest you do the following:
Extended Hard Drive Preparation
1. Boot from your OS X Installer Disk. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Installer menu (Utilities menu for Tiger.)
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. Otherwise, click on the Partition tab in the DU main window.
3. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled, if supported.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled, if supported.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process will take 30 minutes to an hour or more depending upon the drive size.
Now try installing OS X. If you still have a problem then it's possible the hard drive is bad or the installer discs are damaged (or possibly just dirty and need a gentle cleaning) or there's a problem with the optical drive.

Error importing image export

We have encountered a problem importing images that we have exported from another instance of HTMLDB. Operating systems match (DOS - and it is selected from the combobox on export), application ID-s match, any non-latin characters are removed from image names, but upon last step of importing those images to our test database HTMLDB instance, we get the following message:
Error installing image.
Return to Application
ORA-20001: GET_BLOCK Error. ORA-20001: GET_STMT error. ORA-20001: Execution of the statement was unsuccessful. ORA-00922: missing or invalid option
---------------------------------------set linesize 250-- begin wwv_flow_image_api.remove_image( p_image_name => 'top-bar-conf.gif', p_flow_id => 100); wwv_flow_image_api.remove_image( p_image_name => 'top-bar-logout.gif', p_flow_id => 100); wwv_flow_image_api
What could be wrong? Or where do I send the export file for closer inspection?
Kaja

For a few months these exports/imports have worked perfectly, the problem occurred for the first time last week.
I don't know how to export only some images from the workspace (except for the choice between workspace images and specific application images), but when I deleted other than first two images from the export file (in my texteditor deleted others from remove part and also from the insert part of the image export file), then the import was successful - so it must be something about those other files.

Images For DVD Menu Not All Appearing

Can someone please explain, when I drag 4 or 5 jpeg images for my theme into the "Drop Photos Here" boxes to be cycled, only 2 images get cycled through during the preview; even after I burn the DVD. Why aren't the remaining 2 to 3 images being recognized that I have chosen for my travel theme?
Thanks,
Henri
Powerbook G4, 1.67Ghz Superdrive 2GB RAM Mac OS X (10.4.7)

Can someone please explain, when I drag 4 or 5
jpeg
images for my theme into the "Drop Photos Here"
boxes
to be cycled, only 2 images get cycled through
during
the preview; even after I burn the DVD. Why aren't
the remaining 2 to 3 images being recognized that
I
have chosen for my travel theme?
Which element of the Travel theme: main, chapters or
extra?
Good Question...I didn't use chapters..So I guess it's Main...

Error installing Images for 3.2 into XE

Similar Messages

Maybe you are looking for