Error installing itunes 10.5 on windows vista

I keep getting an error message that says something about the windows installer when I try to download itunes 10.5

You should probably begin by doing all your windows vista windows updates, those should take care of updating windows installer.
Once you're updated on windows, you should check to see if you have a 64bit version of windows.
If you do, you'll want to install the 64bit version of itunes: http://support.apple.com/kb/DL1427

Similar Messages

Unable to install iTunes after converting from Windows Vista to Windows 7. Am told installation was successful, then "iTunes was not installed correctly", followed by "Error 7 (Windows error 193).

Unable to install iTunes after converting from Windows Vista to Windows 7. Am told installation was successful, then "iTunes was not installed correctly", followed by "Error 7 (Windows error 193). I have my iPod plugged into my computer via USB port. What am I doing wrong?

i have the only account on my laptop so have checked and am the account administrator
i run windows 7 home premium
I have the same problem and
have followed the link uninstalling in the correct order,
then restarted as per instructions,
went to Apple to download itunes,
hit download now,
Visit the iTunes download page. Click Download Now to download the iTunes installer. When prompted, click Save (instead of Run).
did not get a save instead of run prompt
Right click on iTunesSetup or iTunes64Setup (the installer you downloaded in step 3).
If you have Windows Vista, Windows 7, and Windows 8: Choose "Run as administrator."
i can only click run as administrator from right clicking the shortcut on my desktop screen
If iTunes fails to install or repair, it might be necessary to remove components left from a previous installation of iTunes and then reinstall.
sick of doing this
at least 7 or 8 times i have re installed itunes to no avail
troubleshooting no better
please help. pulling my hair out at this stage
it was working fine until 2 days ago when i opened itunes it offered to update to 12.1
not working since i clicked yes
also i have gone to restore previous point and ffs there are no restore points before my multiple reinstalls
really dont want to have to restore factory settings

Error when installing itunes version 9 on Windows Vista 32bit

When trying to install itunes version 9 an error has come up before the installation is complete.
The error reads -
An error occurred during the installation of assembly
'microsoft Vo80.CRT,version = "8.0.50727.4053,"type="wn32",publickey token=1fc8b3b9ale18e3b" process or architecture="x86"
HRESULT.0x800736133
Can anyone help me - I am using windows vista 32bit. Have tried turing off ALL security and reinstalling as someone else suggested previously. But still have had no luck
Thanks

Thanks Emma!
Ox800736B3
Not a lot of documentation on that one, I'm afraid, but there's some general principles troubleshooting we can try with it that might get us moving forwards.
(1) Do you currently have a copy of the Microsoft Visual C++ 2005 Redistributable Package installed on that PC? If so, try downloading the following security update:
[Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package ATL Security Update|http://www.microsoft.com/downloads/details.aspx?familyid=766a6af7-ec73-4 0ff-b072-9112bab119c2&displaylang=en#filelist]
Does iTunes install for you after applying that update?
(2) If no joy there, head into your Windows Update and click on the Update History. Have a lot of Updates also been failing for you recently? If so, doubleclick on the entries for the failed updates to bring up more information on each. What error codes appear for you for the failed updates? (Precise spelling, please.)

VBScript Error when trying to install iTunes 7.2 on Windows Vista PC

I downloaded iTunes v7.2 + Quicktime. When I try to install, I receive the following error:
"iTunes could not be installed because Visual Basic Script (VBScript) is not installed or has been disabled. Make sure VBScript is installed, turn-off script blocking in anti-virus and personal firewall software, re-register VBScript, and then install iTunes."
I installed my current version of iTunes v7.1.1.5 on my new Windows Vista PC just a month or so ago and never encountered this error. I have also tried to update Quicktime and get this same error. Why am I getting this error now? What do I need to do to 1) ensure VBScript is installed, 2) that script blocking is turned off since I don't see any settings in my Windows Live OneCare that allow me to do anything related to scripting, and finally 3) re-register VBScript?
PLEASE HELP. Thanks!
Dell XPS M2010 Windows Vista

although the following document refers to XP rather than Vista, it's still worth a crack on a Vista box:
iTunes and QuickTime for Windows cannot be installed without Visual Basic Script (VBScript)

I have installed itunes 11.4 to windows vista and now I have an error; The procedure entry point ADiAdID_AcquireMatchSlotIfNecessary could not be located in the dynamic link library iAdCore.dll. What do i do to syn my phone

My problem is after installing itunes 11.4 this is now a problem
The procedure entry point ADiAdID_AcquireMatchSlotIfNecessary could not be located in the dynamic link library iAdCore.dll
is the first ERROR and
some error 127 reinstall
can you please tell me how to fix it?
Im running Windows Vista
All I want to do is back up my iphone 4s, so i can add my iphone 6 Very Fustrated

Read Hi, just tried to upgrade to 11.2 but now when I try to open itunes I get an error message saying "the procedure entry point ADiAdID_acquirematchslotifnecessary could not be located in the dynamic link library iAdCore.dll". Any suggestions?

Error on installing Itunes 10.5 on Windows Vista 64 Bit

Hi All,
I am receiving below error when I try to install Itunes 10.5 on my Windows Vista 64 Bit .... But was able to install 10.4.1 succesfully .
"An error ocurred during the installation of assembly
'Microsoft.VC80.CRT,version="8.0.50727.4053",type="win32,publ
ickeyToken="1fc8b3b9a1e18e3b",processorArchitecture="x86".
Please refer to Help and Support for more information.
HRESULT:0x8007054F"
Please Advise .

Its a Issue with your C++ Library on your computer, a way to fix it is to Rebuild your entire C++ Library from uninstalling the highest version to the lowest verision and reinstalling them back in chronological order..
I would suggest to contact apple support, request a Senior advisor they should be able to get that squared away, now if your not in phone support period you will probably have to pay for support.
I'd suggest the apple care if you havent got it yet

VBscript error message when installing itunes 7.2 on windows vista

I have tried to install itunes 7.2 with vista as my OS, but everytime i do, I get a message saying that VBscript is disabled and I need to enable it. I have also tried to uninstall itunes, but I get the same message also. I have checked for an answer but I can only find an answer for XP/2000...can anyone help?
Windows Vista

I'm having the same exact problems. I cannot upgrade itunes or quicktime. The problem seems to have happeed since Microsoft sent out it's Itunes patch a few weeks ago.
I'm running spy sweeper and pc-cillian on my system. I've shut both down as well as disabling protected mode on IE, but nothing seems to help.
HP Windows Vista

Cannot install itunes 7.1 in Windows Vista Home Premium

I am getting this error when I try to install iTunes:
"iTunes could not be installed because Visual Basic Script (VBScript) is not installed or has been disabled. Make sure VBScript is installed, turn off script blocking in anti-virus and personal firewall software, reregister VBScript, and the install iTunes."
Does anyone know how to fix this problem? Please advise.
Thanks
Other OS Windows Vista Home
Other OS Windows Vista Home

Could you please post the link, where you found your answer,... I am having the same problem, and unable to install the itunes, to a new pc, which has vista,...ty.

Unable to install itunes 10.1 to Windows vista

Hai everyone.
Ive been having a really hard time trying to install itunes 10.1
To do so,I uninstalled itunes 10 and tried installing itunes 10.1.While it is in the process of installing,an alert pops up and says "Could not access %Appdata%/" and after i hit cancel another alert pops up saying "Could not access network location %appdata%" and then another alert pops up saying quicktime was not installed.
I have followed every support to try to solve this problem and it still wont install.
I have uninstalled and installed many of times.
I updated my windows to the latest package.
I downloaded the itunes 10.1 32bit because that is the specific system type for my computer.
I downloaded itunes 9,but dosent read my library because it was created with a newer version of itunes.
I have deleted the temp folder many many times.
I have tried installing in administrator mode and same problem.
My friend that is really good with computers looked into my computer and found nothing wrong with and files.
What should I do?
Please help.

Did you try the fixit from the following Microsoft document, vanessa?
[You receive an "Error 1606" error message when you try to install or remove a Microsoft program|http://support.microsoft.com/kb/886549]

Fatal error installing software photosmart c7250 on windows vista 32 bit

Issue with Uninstall and Install print driver software on my PC - printer is HP Photosmart all in one C7250 - wireless network hook-up
My printer had been working for many years. Then some of the photo print functionality had stopped working - I suspect because there may have been a conflict with multiple HP print drivers on my PC. So I attempted to Unistall all HP software (via window uninstall). All successfully uninstalled except:
C:\program files/hp/digital imaging\esupport\hpzscr01.exe
C:\program files/hp/digital imaging\ocr\hpzscr01.exe
C:\pro...
C:\pr...
I was able to manually unistall the first 2 files since I could see where they were located. But I have no idea about the other 2 becasue the error message did not provide full name as you can see. I tried to install anyway (using HP Solution for Install Errors - Windows Vista). Followed all instructions. The install of latest driver/software (downloaded from the HP website) got as far as detecting my wireless printer; then it gets stuck at the config stage at 96% for 15+ minutes - then runtime error situation code 07417929. HELP! I think it's all becasue I can't unistall these phantom files. does anyone have advice?
---------------- More INFO ---------------------
After above, I am able to print in the basic way - but my HP Solution Center Software in not operational. Message when I try to open Solution Center is "No HP Devices habe been detected."
I have a LOG file with some PRT Screens that I wish I could attach to this note (can't figure out how). It may give more insight to the errors.
This question was solved.
View Solution.

The security settings are for local security, if you are not in a corporate enviroment, there should be no reason to worry.
Something we have not tried yet would be to
1. Uninstall the current HP software.
2. Turn off the printer and unplug it.
3. Install the software, and at the point it asks whether it is a wireless or wired connection, choose wireless, and when the configuration window pops up immediately cancel it.
4. It will go back to the page that asks you if it is a wired or wireless connection, choose cancel again and select OK.
5. It will finish installation then ask about placing an icon on the desktop, choose yes and tell it to complete the software installation and place an icon on the desktop.
6. Once that completes, plug in the printer, turn it on, and click on the icon to have it search for, configure, and install the printer.
Let me know what happens.
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

Help installing itunes on laptop with Windows Vista.

I have a laptop with Windows Vista. I've tried to download iTunes but I keep getting a message that says "There is a problem with this Windows Installer package. A program required for his install to complete could not be run. Contact your support personel or package vendor." I read a thread that suggested removing all Apple components then restarting. I was unable to remove Apple Software Update. All other components were removed fine. Someone please help. Thanks.

This forum is for troublshooting compatibility issues between Macs and Windows, not iTunes.
Please post your question in the iTunes discussions:
http://discussions.apple.com/category.jspa?categoryID=150

When installing itunes on PC with Windows Vista, the itunes program "took over" all of my desktop icons.

When installing itunes of my PC with Windows Vista, the itunes program "took over" all of my desktop icons. How can I install it so it doesn't do that? Thanks!

You can force Vista to rebuild the desktop icons by changing your monitor's color depth momentarily. In the display properties, change to 16-bit color. Then change back to 32-bit.

Why can´t I install Itunes 10.5 for windows vista?

"Error durante la instalación del ensamblaje"
"policy.8.0.Microsoft VC80.CRT.type="win32-policy".vers ion="8.0.50727.6195".publicKeyToken="1fc8b3b9a1e18e3b".processorArchitecture="x 86"".Consulte Ayuda y soporte técnico para obtener más información. HRE...

It seems to be an update issue under Vista. Therefore I would try to klick right the Setup.exe-File and then install iTunes with XP-ServicePack3-Compatibility (and as Administrator).

Installing Itunes 9.2 on Windows Vista

I just got done installing the new software update for my 3G iPhone and iTunes told me the phone required iTunes 9.2 or later. Sometime during the installation of iTunes 9.2 a message comes up saying, "There is a problem with this Windows Installer package. A program required for this install to complete could not run. Contact your support personnel or package vendor." Not knowing what either of those are, I'm kinda stuck. What should I do?

Updated to iTunes 9.2 and during install my network connection goes down. After install is complete, network connection never comes back. I'm on Windows Vista SP2 64-bit. Per your suggestion, uninstalled Bonjour and bounced laptop, still no network connectivity.... Help, please

HT1923 How to uninstall itunes 32 bit and install itunes 64 bit on windows vista 64

I installed 32 bit version of Itunes by mistake on a Windows Vista 64 bit computer. I have lots of items in my Itunes library. Can I uninstall the 32 bit version and install the 64 bit version without loosing my Itunes library?

Yes you can without losing your music. Here is a link to a good website that helps people install and / or uninstall iTunes properly. It can keep you from going completely nuts if you are running into any problems trying to install, reinstall or uninstall iTunes! You can find step by step instructions there to help you if you can't remove or install iTunes for any reason or if it got corrupted somehow. It also has other reference links that have helped a lot of people from going completely nuts with iTunes problems: http://HowToUninstalliTunes.com

Error installing itunes 10.5 on windows vista

Similar Messages

Maybe you are looking for