Error installing KB3025390. Now cannot decline the patch.
I am running SBS 2011 Windows 2008R2.
Patch KB3025390 was pushed through by WSUS. When I tried to install the patch it failed. I then downloaded the patch from the Microsoft Download site and tried to install it. It failed again. Now I cannot decline the patch in SBS Console > Updates. It
just shows up under errors.
Does anyone know how I can either get this patch installed or declined?
Thanks
Howard
Hi Howard,
Based on your description, I understand that you failed to install the KB3025390 when it pushed via WSUS. Then
directly download the update from Microsoft site and install again. However, still fail to install the update.
Did you install any third-party application on the server? Please perform a
clean boot and check if this issue still exist. Please also run
SBS BPA tool and check if find relevant issues.
Meanwhile, did you get any error message when failed to install this update? Please also check
CBS and WindowsUpdate log files if find more clues.
For WSUS, please refer to following article and repair WSUS, then check if can help you.
Repair Windows Server Update Services
If anything I misunderstand or any update, please don’t hesitate to let me know.
Hope this helps.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Similar Messages
-
I just installed OS X Yosemite on my MacBook. I now cannot get the computer to start up. If I hold down the power button to try and power it back up, it will not start. Any ideas on how to fix this?
Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstalling OS X Without Erasing the Drive
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Download and install the OS X Yosemite 10.10.3 Combo Update.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Alternatively, see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless. -
I just installed Lightroom CC. When I try to open it, I get an error message: "An internal error has occurred. Cannot create the required folder: ..."
Cannot create the required folder
-
In an earlier version (Firefox v.31) on this, and (presently) on two other PC's, I was/am able to run add-on FT DeepDark 11.3.1 without any problems. It was only recently - after updating to v.32.0.3 on this PC that this situation started. The PC in question is a Dell Dimension 8400 Intel P4 running Windows 7, though I'm thinking it may have something to do with the newer version of Firefox. Could anyone help me with this? I like this add-on because it is easier in my eyes when browsing the internet. Thanks
PS: Attempted to install the troubleshooter, and again I received a similar error: "Troubleshooter could not be installed because Firefox cannot modify the needed file."This error has been reported before in this bug:
https://bugzilla.mozilla.org/show_bug.cgi?id=730040#c21
Please read that bug I linked you to and let me know if the last comment in the bug solves your problem. Apparently the problem is about the addon .xpi file being read-only. Try right-clicking it, going to Properties and unchecking the "Read-only" attribute box at the bottom of the dialog. Click Apply, then OK. -
I have installed Adobe Lightroom CC. In the process of launching, a popup appears, that says: "AN INTERNAL ERROR HAS OCCURRED. Cannot create the required folder: /Users/(my user name)/Library/Application Support/Adobe/Lightroom/Develop Presets." So even though Lightroom CC is installed, it will not launch. What do I need to do to allow it to launch?
The problem was solved today. Here's the full story. I'm a Mac user. At first I installed Lightroom CC on my iMac (desktop). I had this problem so I called Adobe, and was referred to a "special unit" . After about an hour the tech solved it for me ... we did a screen sharing and she took control of my computer for a loooong time. Because of language difficulties, at first I wondered if she knew what she was doing but she eventually solved it. Although she couldn't explain exactly what she was doing, she summarized it by saying "it was a permissions problem." I asked if I would have the same issue later when I installed it on my laptop (Macbook Air). She said probably not.
But I did. The same internal error popup arose on launch and launch did not complete on my laptop. I tried chat but no joy so I eventually called Apple Care. I had noticed that on my laptop (and the iMac for that matter), that there was no Library folder after my user name. The Apple tech explained that the Library folder is actually there but it is hidden because it's very easy for users to do some very nasty things to their computer by going astray while in the Library folder. The folder is actually there, but they hide it. I did remember seeing that the tech helping me with my iMac had typed the work "Library" while she was controlling my computer. Basically she had activated the hidden Library folder so she could open the path that Lightroom was trying to follow to create that "Develop Presets" folder. For some reason, the inability to create that folder in the launch process was preventing launch from being completed. The Apple tech said she didn't actually have to do that and activated the Library folder by use of the Go selection on the menu bar. Anyway, once that complete path was replicated and opened, the next step was to go to the Lightroom Permissions field and add my user name to the user categories already there and enable "read and write" permissions to my user name. Once done, I shut down my laptop, and then rebooted. I launched Lightroom and then boom, voila, heavens to betsy, etc. it launched and suddenly a dismal weekend turned into a great one.
I am not a geek, so I hope this makes some sense. I also hope Lightroom launches again tomorrow and beyond! -
Got help fixing my youtube problem, now that is working. In the process of making the fix, lost my aol set up. Re installed it, but cannot access the icon. How do i get my AOL back?
If it's an application, it should be in the Applications folder. If in doubt, double click on the hardrive icon to open it up, then press Command+F (find) and in the window that comes up for what you want to find, type in AOL and it should appear. You can either drag it to the Dock for easy access or make an alias of that, and drag that alias to the Dock. Oh, and just so's you know, this forum is for Desktop macs only. We may be able to answer your question about a MacBook Pro. Same kind of animal, but different breeds.
good luck
John b -
I have a Windows XP computer and accidentally formatted the C:\ Drive. I then decided to buy the Windows Vista CD installation and popped it into the CD Drive, there was a problem with the Drive so I had to move it onto a USB Drive instead(on another computer).
When I booted my PC(C: Drive formatted) all went well until I typed in the product key and clicked next. It shows a dialog box:
Install Windows
Windows cannot open the required file E:\Sources\Install.wim. The file may be
corrupt or missing. Make sure all files required for installation are available, and
restart the installation. Error code: 0x80070570
I am in urgent need of help immediately. Please help me!
P.S. and thanks for advance for any help. Sorry for anyone with the same problem.
PC info: HP dc5750 Small Form FactorIt sounds like there's a problem with that file. You will need to re-copy the files to USB or even re-download the operating system from Microsoft.
-
when i go to www.erail.net for train details. message as"click here to install plugin" displayed and clicked for install then the message "erail plugin for firefox could not be installed because firefox cannot modify the needed file"
so, further what should i do
regards. madhuYou usually get this error if you try to install an extension that needs to be unpacked to work properly.<br />
Current Firefox version do not unpack an extension automatically, but rename the xpi file to the extension's GUID.
An extension that needs to be unpacked should have an unpack flag in its install.rdf file
<pre><nowiki><em:unpack>true</em:unpack></nowiki></pre>
*https://developer.mozilla.org/En/Updating_extensions_for_Firefox_4.0#XPI_unpacking
You can try to set the extensions.alwaysUnpack pref to true on the <b>about:config</b> page.
The extension seems to install, but I haven't tested if it works.
*https://addons.mozilla.org/firefox/addon/erail-plugin-for-firefox/ -
ERROR: OPatch failed as verification of the patch failed.
I installed OID by following these instructions( http://www.oracle.com/technology/pub/articles/chan-oid.html), db version created is 10.1.0.5 , but every time i apply CPU patch i receive error
here is opatch lsinventory results
Installed Patch List:
=====================
1) Patch 9119261 applied on Mon Feb 15 16:17:37 CST 2010
Unique Patch ID: 12031038
Error during opatch apply
OPatch encounters the following issues during Make:
There were problems running make commands. The errors encounted were:
Error for command: cd /oracle/product/oid10g//rdbms/lib
/usr/ccs/bin/make -f ins_rdbms.mk client_sharedlib ORACLE_HOME="/oracle/product/oid10g" 2>/oracle/product/oid10g/.patch_storage/9119261/make_local.stderr
I ran this command manually and it did'n gave any error
/usr/ccs/bin/make -f ins_rdbms.mk client_sharedlib ORACLE_HOME="/oracle/product/oid10g" 2>/oracle/product/oid10g/.patch_storage/9119261/make_local.stderr
Comparing "/oracle/4dba/9119261/files/lib/liboraolap10.a/xsoqhelp.o" and "/oracle/product/oid10g/.patch_storage/verify/lib/liboraolap10.a/xsoqhelp.o"
Comparing "/oracle/4dba/9119261/files/lib/liboraolap10.a/xsoqftbl.o" and "/oracle/product/oid10g/.patch_storage/verify/lib/liboraolap10.a/xsoqftbl.o"
There are 2 issues copying files to Oracle Home.
FILE PROBLEM: some files are not patched.
OPATCH_JAVA_ERROR: Patch was not successfully applied.
Verification of the patch failed.
ERROR: OPatch failed as verification of the patch failed.
Edited by: user12001353 on Feb 15, 2010 2:31 PM
Edited by: user12001353 on Feb 15, 2010 2:37 PMWhy are you applying Database Patches to Oracle Application Server?
What is telling you to do this? -
I have just installed Firefox 4.0. I cannot install the extension called Springpad extension, found here: https://addons.mozilla.org/en-US/firefox/addon/springpad/
I click add to Firefox, it downloads, prompts me that the author is not verified and I click 'Install Now'. It then says "Springpad extension could not be installed because Firefox cannot modify the needed file". What am I missing here?Unable to get Springpad Browser Extension to show up on my browser even though it is with-in my existing add-ons. I was having problems with the Springpad Browser Extension so I thought I would uninstall it and reinstall it but that hasn't worked. So I would like to know how to get it back so I can use it. When I go to the help button and click add-ons to search for Springpad, it does not come up in the results. So I tried using the link on my Springpad homepage website, but it didn't work. Then I searched Firefox support and found this post and tried installing it using the link here. It shows up now in my list of existing add-ons, but when I enabled it, it did not show up on my browser as a clickable icon I can use to spring a web-site. I'm stuck now!
However, the reason for uninstalling it is there is no longer a"back arrow, the + sign, home, or scissors" at the top of the Springpad Browser Extension for Firefox? I have to log out and back in in order to get back to my notebooks because I am unable to get to them without a home button or a back button...and now I can't just click the scissors to spring a web-page. How are we supposed to spring a web-page now?
Disappointed,
Angela -
Error 1406. Setup cannot write the value mlcfg32.cpl
Hi to all. I am attempting to upgrade Office 2007 Standard to Office 2013 Pro. I have used the OCT tool to create a custom MSP. On some machine the upgrade fails. It is always the same error (see below).
[quote]
Error 1406. Setup cannot write the value mlcfg32.cpl to the registry key \Software\Microsoft\Windows\CurrentVersion\Control Panel\Cpls. Verify that you have
sufficient permissions to access the registry or contact microsoft product services (PPS) for assistance. For information about how to contact PSS, see
C:\Users\......
[/quote]
I have attempted the following:
1.Log on to the computer by using an Administrator user account.
2.Start Microsoft Windows Explorer.
3.On the Organize menu, click Folder and search options.
4.Click the View tab.
5.Under Hidden files and folders, click Show hidden files, folders, and drives.
6.Click to clear the Hide extensions for known file types check box.
7.Click to clear the Hide protected operating system file (Recommended) check box, and then click OK.
8.On the Warning dialog box, click Yes.
9.Open the following folder: C:\Users\All Users\Microsoft\Office\Data\
10.If you are running Office 2007, right-click Opa12.dat or if you are running Office 2003, right-click Data.dat, and then click Properties.
11.Click the Security tab.
12.Click Advanced.
13.Click the Permissions tab.
14.Click to select Everyone in the Permission entries list, and then click Edit.
15.Click to select the Full Control check box.
16.Click OK four times. If these steps do not resolve this issue, delete the Opa12.dat, the Opa11.dat file or the Data.dat file from the following folder, and then restart an Office 2007 program, an Office 2003 program or an Office XP program
C:\Users\All Users\Microsoft\Office\Data
Has anyone seen this issue previously?
Kind Regards,
Phil.Hi Phil,
Thank you for your questions. Have you uninstalled Office 2007 from the machine before the Office 2013 installation?
I believe you've already seen this KB article before, the steps above are quoted from it:
http://support.microsoft.com/kb/838687
As can been seen from the article, the steps above are specific to Method 4. There are three other Methods mentioned in the article, have you ever tried them? If not yet, I would suggest you to have a try:
Method 1: Set the permission for the Everyone group of the registry subkeys that are listed in the error message to Full Control.
Method 2: Disable the third-party application.
Method 3: Try the installation again in
Let me know if the issue persists after the steps above, we'll take a further look then.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs. -
Error launching office client : Cannot run the macro 'RegisterEPMXIIFn'
Error launching office client : Cannot run the macro 'RegisterEPMXIIFn'
I've been receiving the above error since last week. I've adjusted the macro settings in excel and tried reinstalling the epm addin numerous times and up till now i haven't managed to get it resolved. Really need someone to help me on this. Whenever i check in excel, the epm add-in is already enabled. Please let me know how else can i get to resolve this.Dear Rudy,
Indeed, could you please try the following suggestions:
In the Internet Explorer, go to : Tools->Internet Options-> Security->Custom Level, in section “Download”, check if the option “Automatic prompting for file downloads“ is enabled
In Excel, go to Excel Options-> Trust Center-> Trust Center Settings-> Macro Settings: check the
options “Disable all macros except digitally signed macros” and "Trust access to the VBA project object model"
Regards,
Siwar -
[Add-on] could not be installed because firefox cannot modify the needed file
I've tried both Zotero & Firefox forums with no success:
Zotero could not be installed because Firefox cannot modify the needed file.
I've deleted my cache, restarted firefox and computer, tried in various versions of Firefox (currently 8.0 which the add-on store says is compatible). I'm running brand new Mac with Windows for Mac 2011, have tried downloading in Safari & dropping into Firefox, from the Firefox add-ons and directly from the site. The add-ons says - unable to install & both the other methods list the above error (cannot modify the needed file).
Thanks in advance.This can be a problem with the file(s) that store the extensions registry.
Delete the files extensions.* (extensions.sqlite, extensions.ini, extensions.cache, extensions.rdf) and compatibility.ini in the Firefox [[Profiles|profile folder]] to reset the extensions registry.<br />
New files will be created when required.
See "Corrupt extension files":
* http://kb.mozillazine.org/Unable_to_install_themes_or_extensions
* Help > Troubleshooting Information > Profile Directory: Open Containing Folder
If you see disabled, not compatible, extensions in "Tools > Add-ons > Extensions" then click the Tools button at the left side of the Search Bar (or click the "Find Updates" button in older Firefox versions) to do a compatibility check or see if there is an update. -
I did a software update on my ipad and now cannot access the internet. how can i fix this?
I did a software update on my ipad to 8.1 and now cannot access the internet. How do I fix this? My mail updates, but to get internet access I had to move from wifi to cellular data, and now even cellular data does not allow me access.
Hi Go to settings Reset Network Settings After Reset you need to enter your Router wireless key Before you do this turn off your Router for 30 seconds Also an option is to go on Websites for your make of Router look for any Firmware updates but you can do this later. Cheers Brian
-
i have reached my 5 computer max and reset less than 12 months ago - I am getting an error to say I cannot delete the accounts until 9 September - is there anyway around this?
Have you had a Look Here...
Aurthorise / Deaurthorise About
http://support.apple.com/kb/HT1420
Maybe you are looking for
-
Mail will not load in icloud mail since its update in Sep 2012
My mail pane will not load, I've tried both on my pc and my mac, using safari, chrome and firefox. Both at home and at home. This all used to work, but stopped working when the updates to icloud were release. Has anyone else experienced this and/or
-
Need HELP !! Could not start SunOne Application Server 7
Installed SunOne application server on Windows-XP professional. Failes to start the appserver. I get the following messages in the log files. Could some one help me? [28/Mar/2003:20:44:42] INFO ( 3664): CORE1116: Sun ONE Application Server 7.0 [28/Ma
-
I just bought new iphone from apple store from few weeks only but now i cant even make a phoen call and everytime i try to open "phone" function, it just error and stop on that page without any response. So i tried to close that app and re open it bu
-
Custom fields in webdynpro SRM 7.0 while upgrade from SRM 5.0
Hi Experts, We are upgrading from SRM 5.0 to 7.0. We created 2 custom fields using configure field control in Meta data handling (SPRO) and enabled them for visibility. When we tried to see these two custom fields, they didnt appear in the web dynpro
-
How do you create a new mailbox with Iphone 4?
When I select a mail message to move to a mailbox, I receive "Move this message to a new mailbox" at the top of the Iphone 4, but I can't create a new mailbox. I tried