Error Installing LDAP Integration for Webcenter Sites
I am using the configLDAP.bat bach file for windows to integrate my LDAP server which is on a remote host to webenter sites, but after applying the correct parameter values, I get the following error in the logs at the begging of installation:
[2012-07-16 11:40:53.376][CS.INSTALL][ERROR] ftJDialog.setFromHash() Exception while setting Initial index java.lang.NullPointerException
[2012-07-16 11:40:53.376][CS.INSTALL][ERROR] ftJDialog.setFromHash() Exception while setting Initial index java.lang.NullPointerException
[2012-07-16 11:40:53.376][CS.INSTALL][ERROR] ftJDialog.setFromHash() Exception while setting Initial index java.lang.NullPointerException
[2012-07-16 11:40:53.391][CS.INSTALL][ERROR] ftJDialog.setFromHash() Exception while setting Initial index java.lang.NullPointerException
[2012-07-16 11:40:53.391][CS.INSTALL][ERROR] ftJDialog.setFromHash() Exception while setting Initial index java.lang.NullPointerException
[2012-07-16 11:40:53.391][CS.INSTALL][ERROR] ftJDialog.setFromHash() Exception while setting Initial index java.lang.NullPointerException
and it goes on and on and on....
I really cant find any details on the web related to this issue happening before, does anyone know what this error is referring to?
You wont believe how much pain and suffering I went thorugh, I thank you so much for helping me solve this issue! :)
Thank You! Thank you So Much!!!!!!
Similar Messages
-
Document\Approach\Guidance for ATG Integration with Webcenter Site
we have a requirement where pages/templates/content will be created in Webcenter Sites and will be consumed in ATG. I am looking for some Document\Approach\Guidance for Webcenter Site and ATG Integration
I am looking for some Document\Approach\Guidance for Webcenter Site and ATG IntegrationBelow may help you:
http://www.extended-content.com/wp-content/uploads/2012/07/WhitePaper-PublishingContentToATGFromOracleWebCenter-July2012.pdf
http://www.extended-content.com/mediastore-now-integrates-with-webcenter-sites/
http://technology.amis.nl/2011/08/13/fatwire-integrated-into-webcenter-as-webcenter-sites-for-web-experience-management/
Hope this helps.
-RMishra -
How to download jsk for webcenter sites 11.1.1.8
How to download jsk for webcenter sites 11.1.1.8
well you must have a paid account in oracle support.
-Login to My Oracle Support (support.oracle.com).
-Click the Patches & Updates tab
-Search by "Product or Family" and enter "Oracle WebCenter Sites" for the Product.
-Select "Sites 11GR1" for the Release and click Search.
-You will see "Oracle WebCenter Sites 11gR1 Jump start Kit (Patch)" -
What is recommended Jrockit GC policy for Webcenter sites
Currently we are using jrockit-jdk1.6.0_45-R28.2.7-4.1.0 for fatwire webcenter sites and its currently uses Genparpar GC, we would like to know What is recommended Jrockit GC policy for Webcenter sites.
Thanks
SumanthHello Sumanth,
We do not have any specific garbage collector recommendations for JDKs earlier than 1.7 except that G1GC is not recommended for JDK1.6.
See also Doc ID 1956788.1 and Doc ID 1495193.1.
Kind regards,
Stephan. -
Jump Start Kit for Webcenter sites - Where is the download URL?
Hi All,
I would like to download the Jump start Kit (JSK) for WebCenter Sites. I read in online that it is under Oracle support under Patches and Updates. But i didn't see any tab called Patches and Updates under www.support.oracle.com. I already registered with oracle.com, so when i try to login, it is asking for Support Identifier number. Please help me to download JSK.
regards
SriHi,
you need to provide the support id and get the appropriate permissions to download the JSK and other webcenter products.
I have downloaded it from Oracle support site only. But only after my customer has authorized me with their support id and gave me the permissions to download.
Many Thanks.
Aneef K -
Issue with starting tomcat in windows for webcenter sites installation
Hello All,
I have been trying to install oracle webcenter sites on windows 7, I followed all the steps in the documentation for the configuration and setup. but anytime I start the tomcat using the startup.bat script I get errors as shown below.
C:\WCS11gR1\tomcat\bin>catalina debug
Using CATALINA_BASE: "C:\WCS11gR1\tomcat"
Using CATALINA_HOME: "C:\WCS11gR1\tomcat"
Using CATALINA_TMPDIR: "C:\WCS11gR1\tomcat\temp"
Using JAVA_HOME: "C:\Program Files\Java\jdk1.7.0_21"
Using CLASSPATH: "C:\WCS11gR1\home\bin;C:\Program Files\Java\jdk1.7.0_21\l
ibtools.jar;;C:\WCS11gR1\tomcat\bin\bootstrap.jar"
Initializing jdb ...
runrun org.apache.catalina.startup.Bootstrap start
java.io.IOException: Cannot run program "C:\Program": CreateProcess error=2, The
system cannot find the file specified
at java.lang.ProcessBuilder.start(ProcessBuilder.java:1042)
at java.lang.Runtime.exec(Runtime.java:615)
at java.lang.Runtime.exec(Runtime.java:483)
at com.sun.tools.jdi.AbstractLauncher$Helper.launchAndAccept(AbstractLau
ncher.java:180)
at com.sun.tools.jdi.AbstractLauncher.launch(AbstractLauncher.java:132)
at com.sun.tools.jdi.SunCommandLineLauncher.launch(SunCommandLineLaunche
r.java:235)
at com.sun.tools.example.debug.tty.VMConnection.launchTarget(VMConnectio
n.java:495)
at com.sun.tools.example.debug.tty.VMConnection.open(VMConnection.java:3
26)
at com.sun.tools.example.debug.tty.Commands.commandRun(Commands.java:559
at com.sun.tools.example.debug.tty.TTY.executeCommand(TTY.java:491)
at com.sun.tools.example.debug.tty.TTY.<init>(TTY.java:765)
at com.sun.tools.example.debug.tty.TTY.main(TTY.java:1067)
Caused by: java.io.IOException: CreateProcess error=2, The system cannot find th
e file specified
at java.lang.ProcessImpl.create(Native Method)
at java.lang.ProcessImpl.<init>(ProcessImpl.java:288)
at java.lang.ProcessImpl.start(ProcessImpl.java:133)
at java.lang.ProcessBuilder.start(ProcessBuilder.java:1023)
... 11 more
Fatal error:
Unable to launch target VM.
If I run it by clicking on the bat file directory I get this error in my catalina log file below:
May 27, 2013 5:04:48 PM org.apache.catalina.startup.Catalina start
SEVERE: Cannot start server. Server instance is not configured.
Kindly advise me on what to do to resolve this issue.Yes I did that all the commands give me error.
If I use the startup.bat I get a list of errors ending with:
org.apache.catalina.startup.Catalina start SEVERE: Cannot start server. Server instance is not configured.
but I have configured the instance using the following settings for windows:
SET CATALINA_HOME = C:\WCS11gR1\tomcat
SET CATALINA_BASE = C:\WCS11gR1\tomcat
SET JAVA_HOME=C:\Program Files\Java\jdk1.7.0_21
SET JAVA_OPTS=-Xmx1500m
SET CS_HOME=C:\WCS11gR1\home
SET CATALINA_OPTS=-XX:MaxPermSize=192m -Dfile.encoding=UTF-8 -Dnet.sf.ehcache.enableShutdownHook=true -Djava.net.preferIPv4Stack=true -
Regarding OpenLDAP installation issue for Webcenter Sites
Hi,
Iam trying to install OpenLDAP 2.3.x in RedHat 6.5 in order to integrate the LDAP with WebCenter Sites.
I followed the below steps..
Downloaded openldap-stable-20070110.tgz .
then,
tar-xvzf openldap-stable-20070110.tgz
cd openldap-2.3.32
on running the below command,
./configure --enable-crypt --with-tls
Iam getting this error:
configure: error: Could not locate TLS/SSL package
Please help on this.
ThanksI am going to move this thread from Certification Communities to Webcenter Sites.
Thank you,
Lisa Fedynich
Global Customer Support Engineer, Middleware Certification Support and Community Team -
How to go on production system for webcenter sites
Hi,
I have installed the webcenter sites and deployed them on weblogic. AVISports and FirstSiteII sample sites also been configured, now how can I go on delivery/production url?
IF we need to install gadgets on top of it then how can we proceed?
Thanks,
Rajiv JainFor Gadgets installation you can follow:
https://docs.oracle.com/cd/E29495_01/doc.1111/gadgets_11gr1_installation_guide.pdf
Please make sure you install gadgets in separate machines (not even separate server on same machine) pointing to the installed cs. This is not documented but we got this info through Oracle SR.
For the production url, I'm also waiting for a response:
Actual site URL in the production server?
Thanks
Arijit -
Current State:
• I have a customer running CUCM 6.1 and UCCX 7.01SR5. Currently their CUCM is *NOT* LDAP integrated and using local accounts only. UCCX is AXL integrated to CUCM as usual and is pulling users from CUCM and using CUCM for login validation for CAD.
• The local user accounts in CUCM currently match the naming format in active directory (John Smith in CUCM is jsmith and John Smith is jsmith in AD)
Goal:
• Upgrade software versions and migrate to new hardware for UCCX
• LDAP integrate the CUCM users
Desired Future State and Proposed Upgrade Method
Using the UCCX Pre Upgrade Tool (PUT), backup the current UCCX 7.01 server.
Then during a weekend maintenance window……
• Upgrade the CUCM cluster from 6.1 to 8.0 in 2 step process
• Integrate the CUCM cluster to corporate active directory (LDAP) - sync the same users that were present before, associate with physical phones, select the same ACD/UCCX line under the users settings as before
• Then build UCCX 8.0 server on new hardware and stop at the initial setup stage
• Restore the data from the UCCX PUT tool
• Continue setup per documentation
At this point does UCCX see these agents as the same as they were before?
Is the historical reporting data the same with regards to agent John Smith (local CUCM user) from last week and agent John Smith (LDAP imported CUCM user) from this week ?
I have the feeling that UCCX will see the agents as different almost as if there is a unique identifier that's used in addition to the simple user name.
We can simplify this question along these lines
Starting at the beginning with CUCM 6.1 (local users) and UCCX 7.01. Let's say the customer decided to LDAP integrate the CUCM users and not upgrade any software.
If I follow the same steps with re-associating the users to devices and selecting the ACD/UCCX extension, what happens?
I would guess that UCCX would see all the users it knew about get deleted (making them inactive agents) and the see a whole group of new agents get created.
What would historical reporting show in this case? A set of old agents and a set of new agents treated differently?
Has anyone run into this before?
Is my goal possible while keeping the agent configuration and HR data as it was before?I was doing some more research looking at the DB schema for UCCX 8.
Looking at the Resource table in UCCX, it looks like there is primary key that represents each user.
My question, is this key replicated from CUCM or created locally when the user is imported into UCCX?
How does UCCX determine if user account jsmith in CUCM, when it’s a local account, is different than user account jsmith in CUCM that is LDAP imported?
Would it be possible (with TAC's help most likely) to edit this field back to the previous values so that AQM and historical reporting would think the user accounts are the same?
Database table name: Resource
The Unified CCX system creates a new record in the Resource table when the Unified CCX system retrieves agent information from the Unified CM.
A Resource record contains information about the resource (agent). One such record exists for each active and inactive resource. When a resource is deleted, the old record is flagged as inactive; when a resource is updated, a new record is created and the old one is flagged as inactive. -
Errors installing BI Content for LES (Logistic Execution System)
I am on BI 7.0 SP17 and BI Content 703 level 09.
I am trying to install BI Content for LES - cube 0LES_C01. However there are no updated components for Datasources, DTP etc. Only 3.x infosources etc.
Does this mean that none of the BI Content for LES is upgraded for BI 7.0?
When I try the simulation, I get errors relating to the update rules - 'Error installing update rules'. These are 3.x rules anyway, should I ignore these errors?
Any advice appreciated.hi,
Make sure KEY1 Infoobject is available in your metadata repository or in RSD1.The transfer structure is looking for this field.
First install KEY1 and then try to install other business content.
Please see the link below,
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/content.htm
Thank you
Arun -
Error when create schemas for webcenter using URM.
Hi,
I use Oracle Urm to create necessary schemas for Webcenter. Everything goes well when I create the tables.
However, when I extend my domain with Webcenter, comes to the database connection testing step, the tests always fail.
It said: A connection is establish but no result received from the Test query.
I ignored the test but then later, start the WLS_Spaces manage server, the server can't start because of database error, the needed tables not found.
I use SQl Developer to connect to the database but can't see those newly created tables.
But during the URM step, nothing went wrong.
Can you help me with this?
Thank you very much.Hi Heather,
The reason that you are receiving this error is because the niscope.h file (called by niScope.fp) uses a struct which cannot be compiled into a DLL. This means that the niScope.fp file cannot be included in the target settings. Here's a knowledgebase that describes the error.
http://digital.ni.com/public.nsf/websearch/AC028D9586E947F08625661E006A182F?OpenDocument
If you do want the niScope.fp file to be included then you will need to make some modifications to the niscope.h file and create a typedef for the niScope_wfmInfo struct. Here's info from the help file that describes the type library section and the use of the .fp file.
"Type Library—This button lets you choose whether to add a type library resource to your DLL. Also, you can choose to include links in the type library resource to a Windows help file. LabWindows/CVI generates the type library resource from a function panel (.fp) file. You must specify the name of the .fp file. You can generate a Windows help file from the .fp file by using the Generate Windows Help command in the Options menu of the Function Tree Editor window.
This feature is useful if you intend for your DLL to be used from Visual Basic."
If you do not include the niScope.fp file then you will be able to compile the DLL.
Hope this helps! Let me know if you have any questions.
Erick -
Error Installing Biztalk Adapter for Enterprise (BT2013)
Hi everybody,
I'm attempting to install the adapter for enterprise application, the machine is a win7-64 (phisical) and previously in this laptop had BT 2010. I guess that is something related to the previous version of BizTalk.
The message is:
"An error occured while applying security settings. Users is not a valid user o group. This could ba a problem with tha package, or a problem connecting to a domain controller on the network"
This machine is a sandbox and the user that is running the setup is part of the administrator's group of the machine and is part of the company domain (AD), and the machine is connected to the net.
In advance, I Apreciate your help.
Thanks in advance,
Luis CardozoHi Luis,
Have you verified that the user is member of Biztalk groups ?I think you need to add the user to biztalk group such as Biztalk Administrator ,SSO Administrator etc prior to running the setup .
Another way around is to create groups manually .
perform the following steps and run the installation again:
Create a new user called CREATOR OWNER (Type this command on the command prompt – net user "CREATOR OWNER" /add)
Create a new group called Users (Type this command on the command prompt – net localgroup Users /add)
You can find detailed document at
link here
Thanks
Abhishek -
Books for Webcenter sites development easy steps
Hi,
I am looking for a good book to learn webcenter sites 11g R1 or any easy tutorial to build a website. Any inputs will be of great help.
Thanks
AshwiniHi Ashwini,
You can find developer guide and many other stuff at this link : http://www.oracle.com/technetwork/middleware/webcenter/sites/downloads/index.html
Thanks,
Harish -
Hardware requirements for WebCenter Sites?
Hi,
I didn't found hardware requirements/recommendations for this product.
Is there any official document somewhere?
Other opinions?
Best Regards,
MartinsThere isn't a generic sizing document as such, you would be best advised to speak with your Oracle sales representative as there are very many factors involved in sizing. To give a rough indication of lowest requirements, a bare-bones single instance of Webcenter Sites (not Gadget, Community, etc) for development/testing could run on a single 32bit or 64bit core with 2gb heap, with a small application server like tomcat, and Oracle Database standard/express.
Phil -
Integration between Webcenter Sites and Oracle Real time Decision(RTD)
Hi,
I want to integrate RTD with Webcenter Sites for automated targetting purpose. Can you please provide any implementation view on this?
Thanks,
Krishnendu ChatterjeeHi,
Hi,
I am also looking for the same..
Did you get any link or documents?
Thanks,
Dev
Maybe you are looking for
-
Key Mapping / URL hiding etc
Hi All APex Fans, I'm in the process fo deploying a public application . ( i.e. zero authentication) My URL is a typical HTMLDB URL which reveals certain key fields depending on which page of the application you are : https://xx.xx.xx/htmldb/producti
-
Solution for sending/receiving multiple accounts via Mail and web Gmail
I don't know why I haven't seen this before, especially since I've posted about this with no solutions, but I just discovered I can now do the following: I have multiple email accounts from multiple domain names, and can send and receive from all acc
-
Expand all and collapse all in page
Hi all, I need to implement* expand all and collapse all *in a custom page where I have some Link beans generated dynamically to show the allowable responsibilities.I have added the link beans and respective hide show regions in a stack layout.How to
-
I need to deploy a customized configuration for a limited access network, and have created a custom mozilla.cfg file. It appears as though mozilla.cfg is not being read. I have intentionally created errors in the local-settings.js file, and it will t
-
Any bladie insight at this point is valuable
I need some serious insight here. I am starting to lose it with LP 8.0.2, it crashes so easily and it can hardly handle what I throw at it. I think it's because I am on 10.6.3 and all the other 3rd party stuff is also updated but the sequencer is sti