Error installing LJ M127-M128 PCLmS, Server 2003, x86 driver

I start to load the driver into the remote terminal server, it finds the driver it wants, and then I get the titled message "Unable to install HP Laserjet Pro MFP M127-M128 PCLmS, Windows 2000, XP and Server 2003, x86 driver. Operation could not be completed". Tried every print driver that comes on the CD with the same results.

Hi Jennie,
I am also facing the exact problem , did u found any solution on that?, if yes pls reply me how to rectify this issue asap,
lot of tnx in advance.

Similar Messages

Can't get past OCX error when installing ODAC 11g on Windows Server 2003

I have been trying to install ODAC 11g on Windows Server 2003 and can't get past the OCX error when registering oravsdbgeng11w.dll. I've read every message on this forum even remotely related to this problem and tried every solution offered. I have done a clean install into a new Oracle home, and made sure Instant Client is always included. All service packs and automatic updates have been installed. For what it's worth I have successfully installed ODAC 11g on Windows XP Pro.
If anyone out there has been able to get this up and running and would care to share the wisdom that would be greatly appreciated.
Thanks!
Michael Young
Latitude Geographics
Victoria, BC

Michael, as you already noticed, every time I have seen this issue it has been because ODT was being installed into an Oracle home where no client exists, or perhaps installed into an old oracle home where the client was an old version (eg Oracle10), or the client was broken. Usually though, the user unchecked the instant client checkbox during the ODAC install.
So you say you checked instant client and you still got the error? That doesn't add up...
Are you using 32-bit windows? If you are using 64 bit windows be sure to tell us.
Why don't you try avoiding using instant client at all, in case it is somehow not getting installed properly.
You can do this as follows:
1) Under the download links on OTN, go to the database download page.
2) Download the Oracle Database client 11g for Microsoft Windows
3) Run this installer and Install ODP.NET 1.x and 2.x into a new Oracle home from this client install, but nothing else. If ODP.NET is not listed there (it has been a long time since I looked at that) than just install a minimal Oracle client install.
4) Close the installer
5) Go back and install ODAC and this time choose "Oracle Server" radio button during the install (rather than the client install)
6) Install ODT and ODP.NET at least and be sure they are being installed into the Oracle home created in the first steps above.
This will avoid use of Instant Client and will hopefully avoid the OCX error. Let me know if this solves your problem.
Christian

Can't install DPM agent for Windows Server 2003

Hi,
We have DPM 2012 backup server.i try to install DPM Agent on Windows server 2003 PC. but installation failed.below error are Occured.
Install protection agent on (serverName.domain name) failed:
Error 347: An error occurred when the agent operation attempted to create the DPM Agent Coordinator service on (serverName.domain name).
Error details: %1 is not a valid Win32 application
Recommended action: Verify that the Agent Coordinator service on(serverName.domain name) is responding, if it is present. Review the error details, take the appropriate action, and then retry the agent operation.
HOW CAN SORTED OUT FOLLOWING ISSURE
Thanks,
Gayan

Hi,
The below blog outlines the needed steps for protecting
Windows Server 2003 computers using Data Protection Manager 2012 R2.
http://blogs.technet.com/b/dpm/archive/2014/06/11/details-on-protecting-windows-server-2003-computers-using-data-protection-manager-2012-r2.aspx
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually
answer your question. This can be beneficial to other community members reading the thread. Regards, Dwayne Jackson II. [MSFT] This posting is provided "AS IS" with no warranties, and confers no rights."

About memory issue during installing Oracle 11g on Windows Server 2003

Hi, all
When I installed Oracle 11g on Windows Server 2003 which the server is a virtual server, Oracle only can detect 2G memory.
But there are 4G memory with my server.
I want to know if the Oracle 11g's new feature or the virtual server lead the issue.
Also , I want to get your help to resolve the issue, thanks a lot.

Let me get this straight:
You have created some virtual machine using someone's unknown VM software.
You have installed Windows Server 2003 (perhaps, but not confirmed 32-bit) to that VM.
You have allocated 4GB of memory to the VM (we guess ... not sure I'm ready to take your word on this)
You are attempting to install Oracle 11g (presumably 11gR1 32 bit for Windows) in the VM
And the Oracle (installer?) seems to be reporting that you only have 2GB RAM.
Since I personally have installed Oracle 11g 32bit for Windows on Windows 2003 server with 4GB RAM and had no issues, I would be investigating the (unknown) VM environment.

Unable to install oracle 9i (64) on server 2003 (64)

unable to install oracle 9i (64) on server 2003 (64) :
" setup is valid but to enother type machine"
(proc INTEL XEOM)

I have downloaded this version:
http://www.oracle.com/technology/software/products/oracle9i/htdocs/win64soft.html
Oracle9i Database Release 2 Enterprise/Standard/Personal/Client Edition
for Windows XP 2003/Windows Server 2003 (64-bit)
There is nothin to read about "just for itanium". Pls can u give me a link (or metalink ID) where u got your informations? Is it possible to run 9i 32bit on Win2k3 Enterprise 64bit?

How instal 11g RAC on Windown server 2003

How instal 11g RAC on Windown server 2003, any toturial

I would start simply with the installation guide:
http://download.oracle.com/docs/cd/B28359_01/install.111/b28251/toc.htm
Werner

Cannot run the big size exe file ( 900MB) on Windows Storage Server 2003 x86 SP2 OS(Hyper-V VM machine)

When I run a big size exe file(>900 MB) on Windows Storage Server 2003 x86 SP2 OS VM mchine(which is managered by Hyper-V server), I got the following error message:
Windows cannot open this program because the license enforcement system has been tampered with or become corrupted.
This setup.exe should be a trusted source because of it run other OS(windows 2003, windows 2008, 2008 R2 etc.). we use the same way to create the exe whose size < 700MB, it works fine on the same machine(Windows Storage
Server 2003 x86 SP2 OS VM machine). So I assume that the file size(>900MB) causes the problem, It seems that OS dont' support it.
My questions:
1. Is there the limitation of exe size to run on Windows
Storage Server 2003 x86 SP2 OS VM machine? If yes, what is the size of limitation?
2. What reason is this error? Is it related with Hyper-V?
Thanks,
Recky

Did you install the 2003 VM from scratch or did you create it via a P2V process? In addition to what Shaon says about not all applications running properly in VMs, performing P2V to create VMs can also cause issues with a variety of things.
First thing to check would be Shaon's suggestion to try it in another VM. If it works in another VM, and you P2V'ed this VM, try creating your Storage Server VM from scratch and try again. Better yet, if the application can be run on a later version
of the OS, create a 2012 Storage Server instead of the 2003 Storage Server as your VM and give it a try.
.:|:.:|:. tim

JRE Error : while Install oracle 10gR2 on Windows Server 2003

Hello,
I am trying to install a Oracle 10gR2 on windows server 2003.
I have unziped the files and when I run the oui.exe it gives the below error:
cannot find any matches for wildcard specification "../stage/components/oracle.swd.jre/1.5.0.0./1/DataFiles/*.jar
Error : JRE missing in Scratch Path
I tried changing the oraparmaini file but it did not allow to make any changes.
Not sure if its looking for any particular java files.
What should i edit ,to specify the java location.
Thanks

What exactly did you unzip? This error occurs if there are several zip-files extracted to different target locations. But - if I remember correctly - 10gR2 database is only one zip-file, so you should not face this issue. JRE for OUI is part of the downloaded software,so you don't need to specify a location for JRE, OUI knows where to find this.
Werner

Cannot Install Portal 10g on Windows Server 2003

Downloaded Portal 10G from downloads server (as_windows_x86_portal_wireless_101200) to a new Windows 2003 Server. Attempt to install, get the series of messages "checking prerequisites" ending with "All installer requirements met."
At that point the DOS window disappears, and nothing else visible happens. The "checking prerequisites" messages are also written to a log file in
c:\program files\oracle\inventory\logs
which contains no other information after the message "All installer requirements met."
However, in the server's event log I get two entries:
First...
Application Error:
Faulting application setup.exe, version 0.0.0.0,
faulting module unknown, version 0.0.0.0,
fault address 0x00000000.Followed by...
DrWatson:
The application, C:\Documents and Settings\All
Users\Documents\Downloads\
as_windows_x86_portal_wireless_101200\
Disk1\setup.exe, generated an application error
The error occurred on 03/23/2005 @ 13:09:23.531
The exception generated was c0000005 at address
0020224D (<nosymbols>)After I repeat these steps several times I still get the "Application Error" log entry, but the "DrWatson" error is replaced by a simpler message
Application Error:
Fault bucket 00134882.I noticed another recent entry in the forum that describes a similar problem -- I entered this one to insure that you had as much information as necessary to diagnose the problem. If there's any other information you would like please let me know.
Thanks in advance!

mrp wrote:
I have a machine with the following specs:
Windows Server 2003 Enterprise Edition
16GB Memory
1.2TB Storage
I heard that Oracle has a limitation of 2GB Memory Allocation for Oracle Database. Can you post steps on how to acoomplish this task?Pray tell, where did you hear that? I'd encourage you find the source and ask for your money back - they give bad advice.
More relevant info can be found at http://www.oracle.com/pls/db102/portal.portal_db?selected=3 ... scroll down to 'Platform Guide' and select the appropriate guide - Windows 32 bit, Windows Itanium, or Windows 64 bit - that is relevant to your environment. For 32 bit, look at Chapter 1 and the sections
Oracle Database Scalability on Windows
* Support for Very Large Memory (VLM) Configurations
* Windows 4 GB RAM Tuning (4GT)

Installing Single Box OCS WIN Server 2003

To All:
I would like to evaluate Sinle Box OCS on windows server 2003 but I am having difficulty setting up and starting the OCS services.
I assume I have to remove the ORACLE_HOME env variable as well as place some services in manual per Thread 280554 but when I try are start services such Oracle Calendar Corporate services, and all the other calendar services I get errors as well as with Oracle OLAP 9.0.1.1, and othe webcache services. Is there a script out there that starts all the services in a logical order and can someone explain what services I should start first and so on so forth? Also, during the install or actually later stages of the auto configuartion, I got some error messages especially in the Infrastructure Tool of the MTIER phase: Error message as follows
Configuration failed for IAS
IAS Instance exists already
Configuration succeeded for IASProperty
Configuration failed for IAS
Configuration succeeded for JAZN
Configuration succeeded for DCM
MY Machine Specs: Dell PowerEdge 2800 (2 - 3.6GHZ CPU), 6GB Ram, 250GB HD, 1000GB NIC, ...

Hi,
i'm interested on installing OCS on win2003.
Can you advice me any document (also on Metalink) that gives me a good overview of the installation procedure ?
thanks in advance
Andrew
p.s.
In the past, I tried to install release 1 of the collaboration suite on Linux...and even if I managed to reach the end of the installation process, i found huge problems running some components.
Now that the release 2 is out i'd like to give it a go again, but this time i'd like to start with the windows version.

Help... I cannot install JWSDP1.1 in Windows Server 2003

Hello...
Can JWSDP1.1 be installed on Winodws Server 2003?
I execute the jwspd1.1 setup. It opens an Ms-dos windows and run
but finally it disapper and anything to be done.
What I can do, any one have the same question??

I'm having the same problem while trying to install JWSDP 1.2. It throws errors like the following and disappears:
An unexpected exception has been detected in native code outside the VM.
Unexpected Signal : EXCEPTION_ACCESS_VIOLATION occurred at PC=0x6D1C4663
Function=[Unknown.]
Library=C:\Program Files\Java\j2re1.4.1_03\bin\fontmanager.dll
NOTE: We are unable to locate the function name symbol for the error
just occurred. Please refer to release documentation for possible
reason and solutions.
Current Java thread:
at sun.awt.font.NativeFontWrapper.registerFonts(Native Method)
- locked <06C04A98> (a java.lang.Class)
at sun.java2d.SunGraphicsEnvironment.addPathFonts(SunGraphicsEnvironment.java:736)
at sun.java2d.SunGraphicsEnvironment.registerFonts(SunGraphicsEnvironment.java:587)
at sun.java2d.SunGraphicsEnvironment.access$100(SunGraphicsEnvironment.java:49)
at sun.java2d.SunGraphicsEnvironment$2.run(SunGraphicsEnvironment.java:209)
at java.security.AccessController.doPrivileged(Native Method)
at sun.java2d.SunGraphicsEnvironment.loadFonts(SunGraphicsEnvironment.java:203)
- locked <02BA16B8> (a sun.awt.Win32GraphicsEnvironment)
at sun.java2d.SunGraphicsEnvironment.mapFontName(SunGraphicsEnvironment.java:427)
at java.awt.Font.initializeFont(Font.java:313)
at java.awt.Font.<init>(Font.java:345)
at sun.awt.windows.WDesktopProperties.setFontProperty(WDesktopProperties.java:148)
- locked <02BF6A58> (a sun.awt.windows.WDesktopProperties)
at sun.awt.windows.WDesktopProperties.getWindowsParameters(Native Method)
at sun.awt.windows.WDesktopProperties.<init>(WDesktopProperties.java:56)
at sun.awt.windows.WToolkit.initializeDesktopProperties(WToolkit.java:865)
at java.awt.Toolkit.getDesktopProperty(Toolkit.java:1533)
- locked <02BDDB50> (a sun.awt.windows.WToolkit)
at com.sun.java.swing.plaf.windows.DesktopProperty.getValueFromDesktop(DesktopProperty.java:124)
at com.sun.java.swing.plaf.windows.DesktopProperty.createValue(DesktopProperty.java:109)
at com.sun.java.swing.plaf.windows.WindowsLookAndFeel.getDesktopFontValue(WindowsLookAndFeel.java:1323)
at com.sun.java.swing.plaf.windows.WindowsLookAndFeel.initComponentDefaults(WindowsLookAndFeel.java:482)
at javax.swing.plaf.basic.BasicLookAndFeel.getDefaults(BasicLookAndFeel.java:81)
at javax.swing.UIManager.setLookAndFeel(UIManager.java:394)
at javax.swing.UIManager.setLookAndFeel(UIManager.java:424)
at com.installshield.wizard.swing.SwingWizardUI.switchToSystemLAF(SwingWizardUI.java:26)
at com.installshield.wizard.swing.SwingWizardUI.initialize(SwingWizardUI.java:216)
at com.installshield.wizard.StandardWizardListener.wizardInitializing(StandardWizardListener.java:25)
at com.installshield.wizard.Wizard$WizardListenerInitializer.run(Wizard.java:1587)
at java.lang.Thread.run(Thread.java:536)
Any help would be appreciated!

New install ZH77A-G43 with cloned Server 2003 won't boot in Safe mode

Hello,
I just installed a ZH77A-G43 into an existing PC box, new Core i3, new SATA CD and 500G drive, existing tape backup connected to a SCSI card. I cloned the new harddrive into 2 partitions, the first one being a bootable Server 2003. I installed the harddrive on another computer, and the partitions appear to be cloned correctly. When I boot off the new drive in the new hardware computer it gets to the Server 2003 splash screen, and then reboots during processing of acpitabl.dat (this is in Safe mode). I've tried booting from a Server 2003 installation CD, and that also results in a reboot.
I tried removing the SCSI card, and that results in a reboot before the MSI splash screen comes up.
This is the first time I've done a hardware change like this. The MSI instructions were very simple to follow and I was exciding to see the Server 2003 splashscreen after about 30 minutes of hardware installation. But now I'm stuck and request your help.
Regards, Philip

Hello xmad,
Thanks for the suggestions. The CD that wouldn't boot is Server 2003 64 bit--no service pacts. I just tried my VISTA CD and it came up and was ready to start the installation. The hardware is
Seagate 500G harddrive connected to SATA2
LG OEM DVDRW 24X internal connected to SATA1
2 sticks of DDR3 2GB 1333MHz
Quantum DLT-V4 tape backup drive connected to SCSI card
PSU is enclosed in a case labeled ANTEC DESIGN and I can't see any infor unless I take apart the enclosure.
I just removed the SCSI card, and the system reboots immediately after 1 second or so of the MSI splashscreen. With the SCSI card in, it reboots during the Server 2003 splashscreen (during processing of acpitabl.dat).
Should this system be compatible with Server 2003 64bit?
Should I next update the BIOS as you previously suggested?
Update: I currectly have BIOS E7758IMS V1.7

How to install rootsupd.exe on windows server 2003?

hello
i need to update the root certificates. but i can't use "rootsupd.exe", it's only for windows xp...
there doesn't seems to be a similar update for windows server 2003, correct?
how can i solve my problem, do i need to install the certificates manually? if yes, how does this work?
thank you very much!
best regards, jan
regards, jan

"when ich click on "rootsupd.exe" in my windows server 2003 web edition virtual machine (virtualbox), nothing happens - i can't see any actions after clicking that file... and i don't think that behavior is usual...?"
same behavior on windows 7 (x64) workstation - nothing happens after clicking.
maybe i need to extract it, and install the files manually?:
- authroots.sst
- delroots.sst
- roots.sst
- updroots.sst
regards, jan

How to install P1102w Printer on win server 2003 without connecting the printer

Hi guys,
i have to insatall p1102w printer on my server 2003 to print from my client pc witch the p1002w locally connected when i use remote desktop connection.
does anyone knows how to.

Hi,
The P1102w is an Host-Based printer, any host-based printer does not support Citrix / Terminal Services / RDP connection.
You may find that listed on page of the following guide:
http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c03635702/c03635702.pdf
You may try installing the drivers on the client itself and check if that may work..
Hope that may help,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Error installing oracle 10g on WIN2000 server

Where we install oracle 10g on win2000 server, the OUI show the 78% advance but simply close the window and don't show any error, next show the last messages from C:\Program Files\Oracle\Inventory\logs path:
INFO: --------------------------------------------------------------------------------
INFO: Checking OracleHomeSpace
     This is a prerequisite condition to check whether the specified Oracle Home contains any spaces in the path.
INFO: Check complete. The overall result of this check is: Passed
INFO: --------------------------------------------------------------------------------
INFO: Checking InstallOnRoot
     This is a prerequisite condition to test whether installation is done at the root of a drive.
INFO: Checking the ORACLE HOME.... :C:\oracle\product\10.2.0\db_1
INFO: Check complete. The overall result of this check is: Passed
INFO: --------------------------------------------------------------------------------
INFO: Checking DetectAnyInvalidASMHome
     This is a prerequisite condition to test whether the system has been cleaned properly.
INFO: Checking the platform .......912
Thanks.

When screen show:
Product-Specific Prerequisite Checks.
In the first pane show: Check for proper system clean-up
78%
In second pane show: Check for proper system clean-up

Error installing LJ M127-M128 PCLmS, Server 2003, x86 driver

Similar Messages

Maybe you are looking for