Error Installing Operations Manager
System Center Operation Manager installer encountered error during installation and 'Setup cannot be completed' during the 'Data warehouse configuration' stage. I have included the obfuscated log file to hide some details of what the server configuration
actually is, but the essence should remain. I am unfamiliar with what to interpret in the log file and could use some help figuring how to get the install to succeed.
(log was too long so I have uploaded it on pastebin http://pastebin.com/c9kFhkaJ )
Hi,
Which version of SCOM? Please check requirements. Kevin has Quickstart guides.
System Requirements for System Center 2012 - Operations Manager
https://technet.microsoft.com/en-us/library/hh205990.aspx
OpsMgr 2012 R2 – QuickStart Deployment Guide
http://blogs.technet.com/b/kevinholman/archive/2013/10/18/opsmgr-2012-r2-quickstart-deployment-guide.aspx
OpsMgr 2012 SP1 - QuickStart deployment guide
http://blogs.technet.com/b/kevinholman/archive/2013/01/15/opsmgr-2012-sp1-quickstart-deployment-guide.aspx
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
Similar Messages
-
DbSlErrorMsg rc = 20 error installing solution manager 3.2
what am i doing wrong?
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
ERROR 2007-10-23 00:40:18 [iaxxbdbld.cpp:1001]
CR3ldStep::startR3ldProcesses lib=iamodload module=CR3ldStep
MSC-01015 Process finished with error(s), check log file C:\Program Files\sapinst_instdir\SOLMAN32\WEBAS_ABAP_ORA_NUC\DB/SAPSSEXC.log
ERROR 2007-10-23 00:40:18 [iaxxbdbld.cpp:1001]
CR3ldStep::startR3ldProcesses lib=iamodload module=CR3ldStep
MSC-01015 Process finished with error(s), check log file C:\Program Files\sapinst_instdir\SOLMAN32\WEBAS_ABAP_ORA_NUC\DB/SAPAPPL0.log
ERROR 2007-10-23 00:40:18 [iaxxbdbld.cpp:1001]
CR3ldStep::startR3ldProcesses lib=iamodload module=CR3ldStep
MSC-01015 Process finished with error(s), check log file C:\Program Files\sapinst_instdir\SOLMAN32\WEBAS_ABAP_ORA_NUC\DB/SAPAPPL1.log
INFO 2007-10-23 00:40:18 [syxxccuren.hpp:347]
CSyCurrentProcessEnvironmentImpl::setWorkingDirectory(iastring)
lib=iamodload module=CR3ldStep
Working directory changed to C:\Program Files\sapinst_instdir\SOLMAN32\WEBAS_ABAP_ORA_NUC\DB.
INFO 2007-10-23 00:40:18 [syxxccuren.hpp:347]
CSyCurrentProcessEnvironmentImpl::setWorkingDirectory(iastring)
lib=iamodload module=CR3ldStep
Working directory changed to C:\Program Files\sapinst_instdir\SOLMAN32\WEBAS_ABAP_ORA_NUC\DB.
INFO 2007-10-23 00:40:18 [syxxccuren.hpp:347]
CSyCurrentProcessEnvironmentImpl::setWorkingDirectory(iastring)
lib=iamodload module=CR3ldStep
Working directory changed to C:\Program Files\sapinst_instdir\SOLMAN32\WEBAS_ABAP_ORA_NUC\DB.
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
ERROR 2007-10-23 00:40:48 [iaxxbdbld.cpp:1001]
CR3ldStep::startR3ldProcesses lib=iamodload module=CR3ldStep
MSC-01015 Process finished with error(s), check log file C:\Program Files\sapinst_instdir\SOLMAN32\WEBAS_ABAP_ORA_NUC\DB/SAPAPPL2.log
ERROR 2007-10-23 00:40:48 [iaxxbdbld.cpp:1001]
CR3ldStep::startR3ldProcesses lib=iamodload module=CR3ldStep
MSC-01015 Process finished with error(s), check log file C:\Program Files\sapinst_instdir\SOLMAN32\WEBAS_ABAP_ORA_NUC\DB/SAPSSRC.log
ERROR 2007-10-23 00:40:48 [iaxxbdbld.cpp:1001]
CR3ldStep::startR3ldProcesses lib=iamodload module=CR3ldStep
MSC-01015 Process finished with error(s), check log file C:\Program Files\sapinst_instdir\SOLMAN32\WEBAS_ABAP_ORA_NUC\DB/SAPSDIC.log
INFO 2007-10-23 00:40:48 [syxxccuren.hpp:347]
CSyCurrentProcessEnvironmentImpl::setWorkingDirectory(iastring)
lib=iamodload module=CR3ldStep
Working directory changed to C:\Program Files\sapinst_instdir\SOLMAN32\WEBAS_ABAP_ORA_NUC\DB.
INFO 2007-10-23 00:40:48 [syxxccuren.hpp:347]
CSyCurrentProcessEnvironmentImpl::setWorkingDirectory(iastring)
lib=iamodload module=CR3ldStep
Working directory changed to C:\Program Files\sapinst_instdir\SOLMAN32\WEBAS_ABAP_ORA_NUC\DB.
INFO 2007-10-23 00:40:48 [syxxccuren.hpp:347]
CSyCurrentProcessEnvironmentImpl::setWorkingDirectory(iastring)
lib=iamodload module=CR3ldStep
Working directory changed to C:\Program Files\sapinst_instdir\SOLMAN32\WEBAS_ABAP_ORA_NUC\DB.
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
ERROR 2007-10-23 00:41:18 [iaxxbdbld.cpp:1001]
CR3ldStep::startR3ldProcesses lib=iamodload module=CR3ldStep
MSC-01015 Process finished with error(s), check log file C:\Program Files\sapinst_instdir\SOLMAN32\WEBAS_ABAP_ORA_NUC\DB/SAPPOOL.log
ERROR 2007-10-23 00:41:18 [iaxxbdbld.cpp:1001]
CR3ldStep::startR3ldProcesses lib=iamodload module=CR3ldStep
MSC-01015 Process finished with error(s), check log file C:\Program Files\sapinst_instdir\SOLMAN32\WEBAS_ABAP_ORA_NUC\DB/SAPSPROT.log
ERROR 2007-10-23 00:41:18 [iaxxbdbld.cpp:1001]
CR3ldStep::startR3ldProcesses lib=iamodload module=CR3ldStep
MSC-01015 Process finished with error(s), check log file C:\Program Files\sapinst_instdir\SOLMAN32\WEBAS_ABAP_ORA_NUC\DB/SAPSDOCU.log
INFO 2007-10-23 00:41:18 [syxxccuren.hpp:347]
CSyCurrentProcessEnvironmentImpl::setWorkingDirectory(iastring)
lib=iamodload module=CR3ldStep
Working directory changed to C:\Program Files\sapinst_instdir\SOLMAN32\WEBAS_ABAP_ORA_NUC\DB.
INFO 2007-10-23 00:41:18 [syxxccuren.hpp:347]
CSyCurrentProcessEnvironmentImpl::setWorkingDirectory(iastring)
lib=iamodload module=CR3ldStep
Working directory changed to C:\Program Files\sapinst_instdir\SOLMAN32\WEBAS_ABAP_ORA_NUC\DB.
INFO 2007-10-23 00:41:18 [syxxccuren.hpp:347]
CSyCurrentProcessEnvironmentImpl::setWorkingDirectory(iastring)
lib=iamodload module=CR3ldStep
Working directory changed to C:\Program Files\sapinst_instdir\SOLMAN32\WEBAS_ABAP_ORA_NUC\DB.
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
ERROR 2007-10-23 00:41:48 [iaxxbdbld.cpp:1001]
CR3ldStep::startR3ldProcesses lib=iamodload module=CR3ldStep
MSC-01015 Process finished with error(s), check log file C:\Program Files\sapinst_instdir\SOLMAN32\WEBAS_ABAP_ORA_NUC\DB/SAPSLEXC.log
ERROR 2007-10-23 00:41:48 [iaxxbdbld.cpp:1001]
CR3ldStep::startR3ldProcesses lib=iamodload module=CR3ldStep
MSC-01015 Process finished with error(s), check log file C:\Program Files\sapinst_instdir\SOLMAN32\WEBAS_ABAP_ORA_NUC\DB/SAPCLUST.log
ERROR 2007-10-23 00:41:48 [iaxxbdbld.cpp:1001]
CR3ldStep::startR3ldProcesses lib=iamodload module=CR3ldStep
MSC-01015 Process finished with error(s), check log file C:\Program Files\sapinst_instdir\SOLMAN32\WEBAS_ABAP_ORA_NUC\DB/SAPSLOAD.log
INFO 2007-10-23 00:41:48 [syxxccuren.hpp:347]
CSyCurrentProcessEnvironmentImpl::setWorkingDirectory(iastring)
lib=iamodload module=CR3ldStep
Working directory changed to C:\Program Files\sapinst_instdir\SOLMAN32\WEBAS_ABAP_ORA_NUC\DB.
INFO 2007-10-23 00:41:48 [syxxccuren.hpp:347]
CSyCurrentProcessEnvironmentImpl::setWorkingDirectory(iastring)
lib=iamodload module=CR3ldStep
Working directory changed to C:\Program Files\sapinst_instdir\SOLMAN32\WEBAS_ABAP_ORA_NUC\DB.
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
ERROR 2007-10-23 00:42:18 [iaxxbdbld.cpp:1001]
CR3ldStep::startR3ldProcesses lib=iamodload module=CR3ldStep
MSC-01015 Process finished with error(s), check log file C:\Program Files\sapinst_instdir\SOLMAN32\WEBAS_ABAP_ORA_NUC\DB/SAPUSER.log
ERROR 2007-10-23 00:42:18 [iaxxbdbld.cpp:1001]
CR3ldStep::startR3ldProcesses lib=iamodload module=CR3ldStep
MSC-01015 Process finished with error(s), check log file C:\Program Files\sapinst_instdir\SOLMAN32\WEBAS_ABAP_ORA_NUC\DB/SAP0000.log
THIS IS WHAT THE LOG SAYS
C:\usr\sap\MGF\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#6 $ SAP
C:\usr\sap\MGF\SYS\exe\run/R3load.exe: version R6.40/V1.4
C:\usr\sap\MGF\SYS\exe\run/R3load.exe -dbcodepage 1100 -i C:\Program Files\sapinst_instdir\SOLMAN32\WEBAS_ABAP_ORA_NUC\DB/SAPPOOL.cmd -l C:\Program Files\sapinst_instdir\SOLMAN32\WEBAS_ABAP_ORA_NUC\DB/SAPPOOL.log -stop_on_error
(DB) ERROR: DbSlControl(DBSL_CMD_IMP_FUNS_SET) rc = 20
(DB) ERROR: DbSlErrorMsg rc = 20
Thankshey Venkat
Im trying to install solution manager 3.2 with oracle 9i...
I successfully created the central instance.
when creating database instance i get that error. during the load phase..I installed nonunicode installation
central instance is running. could it be that I'm using wrong code page 1100?
I'm not sure what to do its been bugging me for past few days..
And also do you know if 10g is supported with solution manager 3.2? When i installed 10g it said "no database found on this host"
Thanks for your help
Message was edited by:
anand patel -
Error installing Solution manager 7.0 EHP1
Hi All,
I am installing Solution manager 7.0 EHP1 on Windows server 2008 64 bit. I have downloaded the installation DVD's from service market place (Named: 51036441_part1, 51036441_part2 and 51036441_part3).
But i am getting error while giving the path for LABELASC. It is saying that Found the label SAP:WEBAS:7.01:SAPINST..WINDOWS_X64_64. but need the label SAP:UT_SOLMAN70:NW701...*
Please help
Regards
Akshay KoradeDear Achsay,
u can download this below files in following link.
https://cds.sun.com/is-bin/INTERSHOP.enfinity/WFS/CDS-CDS_Developer-Site/en_US/-/USD/ViewFilteredProducts-SingleVariationTypeFilter
j2sdk-1_4_2_17-windows-amd64.exe
+ u can download suitable jce policies.
Regards
kesavan -
Error installing Extension Manager 6.0.5 update
I am unable to install Extension Manager 6.0.5 Update. The installation is unsuccessful. The Error Code is U44M1I0
Hi Swila,
To help us solve the issue, could you please provide the following info?
1. Have you ever changed or removed files in the Extension Manger installation folder?
2. The current version of your Extension Manager.
3. Platform and the OS version that you are working in( Windows7, Windows8, Mac OS X10.7, 10.8, … )
4. Please generate installation log with the steps below, and send the log files to [email protected]
Windows
1. Open Command Prompt window.
2. Run command: cd %temp%
3. Run command: echo > ribs3debug
4. After that a new file named "ribs3debug" should have been created in temp folder.
5. Update Extension Manager CS6, via Adobe Application Manager or running updater installer manually.
6. The log file "X:\Program Files (x86)\Common Files\Adobe\Installers\Adobe Extension Manager CS6 xxxx.log.gz" will be created( check the create date of the file and make sure it is the log of your patch installation ).
Mac
1. Open a Terminal window.
2. Run command: cd /tmp
3. Run command: touch ribs3debug
4. After that a new file named "ribs3debug" should have been created in /tmp folder.
5. Update Extension Manager CS6, via Adobe Application Manager or running updater installer manually.
6. The new log file "/Library/Logs/Adobe/Installers/Adobe Extension Manager CS6 xxxx.log.gz" will be created( check the create date of the file and make sure it is the log of your patch installation ).
A workaround of this issue is, manually deleting the instllation folder of Extension Manager( C:\Program Files (x86)\Adobe\Adobe Extension Manager CS6 in windows or /Applications/Adobe Extension Manager CS6 in mac ), then downloading the Extension Manager 6.0.4 from http://www.adobe.com/exchange/em_download/, installing it and try updating it again.
Thanks,
Xiaoyi -
Error installing SQL Management Studio 2012
have visual studio 2013 ultimate and windows 8.1 . I tried to install SQL Management Studio 2012 and the error occurs
The following error has occurred:
Could not write value to key \SOFTWARE. Verify that you have sufficient access to that key, or contact your support personnel.
Need help to solve this.Running as adiministrator
Summary log file
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2068052610
Start time: 2014-07-21 01:25:26
End time: 2014-07-21 01:32:11
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for SSMS: Use the following information to resolve the error, and then try the setup process again.
Machine Properties:
Machine name: GHAZANFAR
Machine processor count: 4
OS version: Future Windows Version
OS service pack:
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered
SQL Server 2012 LocalDB
1033 Express Edition 11.1.3000.0 No
Package properties:
Description: Microsoft SQL Server 2012
ProductName: SQL Server 2012
Type: RTM
Version: 11
SPLevel: 0
Installation location: c:\350b2b28d35e58b5113af189b3c5\x64\setup\
Installation edition: Express
Product Update Status:
User selected not to include product updates.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: true
AGTSVCACCOUNT: <empty>
AGTSVCPASSWORD: <empty>
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CLTCTLRNAME: <empty>
CLTRESULTDIR: <empty>
CLTSTARTUPTYPE: 0
CLTSVCACCOUNT: <empty>
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: <empty>
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE:
CTLRSTARTUPTYPE: 0
CTLRSVCACCOUNT: <empty>
CTLRSVCPASSWORD: <empty>
CTLRUSERS: <empty>
ENABLERANU: false
ENU: true
ERRORREPORTING: true
FEATURES: SSMS
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: <empty>
FTSVCPASSWORD: <empty>
HELP: false
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: <empty>
INSTANCENAME: <empty>
ISSVCACCOUNT: NT AUTHORITY\Network Service
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: AllFeatures_WithDefaults
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: DefaultSharePointMode
RSSVCACCOUNT: <empty>
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: <empty>
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: <empty>
SQLSVCPASSWORD: <empty>
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: <empty>
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: true
TCPENABLED: 0
UIMODE: AutoAdvance
UpdateEnabled: false
UpdateSource: MU
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140721_012339\ConfigurationFile.ini
Detailed results:
Feature: Management Tools - Basic
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: SQL Server Management Services
Component error code: 1406
Component log file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140721_012339\sql_ssms_Cpu64_1.log
Error description: Could not write value to key \SOFTWARE. Verify that you have sufficient access to that key, or contact your support personnel.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.2100.60&EvtType=sql_ssms.msi%40WriteRegistryValues%401406
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140721_012339\SystemConfigurationCheck_Report.htm -
Error installing desktop manager
I downloaded the latest version of Desktop Manager (v. 5.0) to upgrade from v. 4.3.0.17. When the software began installing the following error shows: "Can't create output file: Autorun.inf".
I'm using Windows XP Professional.Strange. I looked but didn't see that error in the knowledge base.
Have you tried rebooting?
Are you the Administrator on the account? Can you try to log into another account on the PC and try installing the software?
If someone has been helpful please consider giving them kudos by clicking the star to the left of their post.
Remember to resolve your thread by clicking Accepted Solution. -
Errors installing Fabric Manager 3.3.x on Linux
With the 3.3.x version of FM, PostGreSQL is the local DB that gets installed with FM. During an install on Fedora 9 I keep getting errors during the DB install portion. The errors revolve around the inability to find certain libraries. Examples are something like can't find libssl.so.4 and libcrypto.so.4. I've found workarounds on the net for these two particular files but during each attempt at install there is another missing file. I assume I'm doing something wrong since the FM installer should copy any needed files and there is no indication of prerequisite packages needed in the release notes or install guide. FM 3.1.3a works fine since it uses a different DB.
I took a little different route. I installed RHEL 5 and Sun JVM 1.6. Then ran the FM installer and was still getting errors finding the below files. I found other versions of these files and created sym links to them which allowed the installer to complete.
libssl.so.4
libcrypto.so.4
libreadline.so.4 -
Error Installing Configuration Manager
The script
./installCCRSQL.sh collectconfig -s <SID> -r <SYSDBA-USER> -p <SYSDBA-PASSWORD>
Doesn’t work and gives out an error in log stating “connection failed”.
SQL> SQL> ERROR:
ORA-12545: Connect failed because target host or object does not exist
SQL> SQL> SP2-0640: Not connected
SQL> -- Check database status
While connecting to the same database from command prompt using
sqlplus "<SYSDBA-USER>/<SYSDBA_PASSWORD>@<SID> as sysdba"
is working, establishing that there is connectivity from the SOA-Suite installation to the application’s database.
Kindly help...anilKurnool wrote:
ORA-12545: Connect failed because target host or object does not exist
SQL> SQL> SP2-0640: Not connected
Kindly help...You can use forum's search to help yourself,
so, enter those ORA's in the search form and you will be fine.
Search -
BO4 - error installing download Manager
Hi,
Trying to install windows version of sap downloadmanager on windows pc and getting message below.
Anyone seen this before.
If right-click an dselect compatability to use Windows 7 gets past this part.
Windows 8.1 pc
Assume this best way to solve this issue - any other thoughts?
ThanksHi Philip
I've got the same issue the only way to solve this is to download the Runnable .jar file downloading form the next screen:
this file is a portable version, thats the way I use it in my windows 8.1
Hope it help you.
Regards
David Almazán -
Error in communicating with DCR server (Operations Manager 8.5)
Hi,
I just installed Operations Manager 8.5 on a new server. And, although I'm able to login to the OM, I'm unable to add any devices to the DCR. When attempting to add the device the following error is returned:
"Error in communicating with DCR Server
DCR Server may be down. Please start DCR server and then refresh the page. "
The same error is returned when an attempt is made toaccess the screen to change the mode (standalone/master/slave.) However, according to pdshow output DCRServer is up and running:
Process= DCRServer
State = Running normally
Pid = 9220
RC = 0
Signo = 0
Start = 7/29/2011 2:46:33 PM
Stop = Not applicable
Core = Not applicable
Info = DCRServer is up and running
I've browsed the site and tried all suggestions for LMS since I didn't see any for OM. No success.
Any/all suggestions are much appreciated.
Kind regards,
BartIt appears the answer is rather simple. According to a trusted source who works for a Cisco training partner, one must wait before even attempting a login into OM.
Apparently, it takes about 25 to 30 minutes for all the services to start. Any attempt to login to the OM may corrupt the database. This is based on CiscoWorks. When command "net stop crmdmgtd" is issued it takes about 5 minutes to stop the service and a confirmaiton that the service was stopped is displayed. However, when starting the service with "net start crmdmgtd" there is no confirmation that it started successfully. One may look into ":\ program Files\CSCOpx\objects\dmgt\ready" directory for a _lock file." As long as the lock file is present one shouldn't use the browser to login. However, I was advised the best approach is to restart the service and give it 30 minutes.
It worked for me
Kind regards,
Bart. -
Operations Manager Installation Error - Return Value 3
Hello, I am having issues installing Operations Manager Reporting 2007 R2. The installation hangs with no status update a little more then midway through. I am receiving the following exception below. I am trying to install this on a named reporting instance.
013-12-16T16:00:00.0547063-08:00 Debug:
*** Trace Started ***
2013-12-16T16:00:00.0859563-08:00 Debug:
ConfigureOverridesForDWRules: Root Management Server is: CORP32-VS
2013-12-16T16:30:01.7422063-08:00 Error:
ConfigureOverridesForDWRules error: System.TimeoutException : The requested operation timed out.
Exception thrown by custom action:
System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> Microsoft.WindowsInstaller.InvalidHandleException: The handle is invalid.
at Microsoft.WindowsInstaller.SessionProperties.set_Item(String name, String value)
at Microsoft.Reporting.Setup.ReportingManagedCAs.ConfigureOverridesForDWRules(Session session)
--- End of inner exception stack trace ---
at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object parameters, CultureInfo culture, Boolean skipVisibilityChecks)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object parameters, CultureInfo culture)
at Microsoft.WindowsInstaller.CustomActionProxy.InvokeCustomAction(Int32 sessionHandle, String entryPoint)
CustomAction _ConfigureOverridesForDWRules.9B663534_CD9B_41CC_9D93_4E84D3C5E165 returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
MSI (s) (1C:FC) [16:30:01:804]: NOTE: custom action _ConfigureOverridesForDWRules.9B663534_CD9B_41CC_9D93_4E84D3C5E165 unexpectedly closed the hInstall handle (type MSIHANDLE) provided to it. The custom action should be fixed to not close that handle.
Action ended 16:30:01: InstallFinalize. Return value 3.
MSI (s) (1C:80) [16:30:01:804]: User policy value 'DisableRollback' is 0
MSI (s) (1C:80) [16:30:01:804]: Machine policy value 'DisableRollback' is 0
MSI (s) (1C:80) [16:30:01:882]: Executing op: Header(Signature=1397708873,Version=500,Timestamp=1133543036,LangId=1033,Platform=589824,ScriptType=2,ScriptMajorVersion=21,ScriptMinorVersion=4,ScriptAttributes=1)
MSI (s) (1C:80) [16:30:01:882]: Executing op: DialogInfo(Type=0,Argument=1033)
MSI (s) (1C:80) [16:30:01:882]: Executing op: DialogInfo(Type=1,Argument=System Center Operations Manager 2007 R2 Reporting Server)
MSI (s) (1C:80) [16:30:01:882]: Executing op: RollbackInfo(,RollbackAction=Rollback,RollbackDescription=Rolling back action:,RollbackTemplate=[1],CleanupAction=RollbackCleanup,CleanupDescription=Removing backup files,CleanupTemplate=File: [1])
Action 16:30:01: Rollback. Rolling back action:Niki,
I verified the data warehouse SQL server authentication account is indeed blank. I just tried running the installation again and received the following errors in the SQL log.
12/18/2013 07:43:28,spid177,Unknown,Error 777970008<c/> severity 16<c/> state 1 was raised<c/> but no message with that error number was found in sys.messages. If error is larger than 50000<c/> make sure the user-defined message is
added using sp_addmessage.
12/18/2013 07:43:28,spid177,Unknown,Error: 18054<c/> Severity: 16<c/> State: 1.
12/18/2013 07:43:28,spid88,Unknown,Error 777970008<c/> severity 16<c/> state 1 was raised<c/> but no message with that error number was found in sys.messages. If error is larger than 50000<c/> make sure the user-defined message is added
using sp_addmessage.
12/18/2013 07:43:28,spid88,Unknown,Error: 18054<c/> Severity: 16<c/> State: 1.
12/18/2013 07:43:28,spid173,Unknown,Error 777970008<c/> severity 16<c/> state 1 was raised<c/> but no message with that error number was found in sys.messages. If error is larger than 50000<c/> make sure the user-defined message is added
using sp_addmessage.
12/18/2013 07:43:28,spid173,Unknown,Error: 18054<c/> Severity: 16<c/> State: 1.
12/18/2013 07:43:18,spid173,Unknown,Error 777970008<c/> severity 16<c/> state 1 was raised<c/> but no message with that error number was found in sys.messages. If error is larger than 50000<c/> make sure the user-defined message is added
using sp_addmessage.
12/18/2013 07:43:18,spid173,Unknown,Error: 18054<c/> Severity: 16<c/> State: 1.
12/18/2013 07:43:15,spid13s,Unknown,AppDomain 9702 (OperationsManager.dbo[ddl].9701) unloaded.
12/18/2013 07:43:14,spid21s,Unknown,AppDomain 9701 (OperationsManager.dbo[ddl].9700) unloaded.
Also, please see error in the MOMReporting log below:
2013-12-18T07:41:54.8239565-08:00 Debug: ConfigureOverridesForDWRules: Root Management Server is: COR32
2013-12-18T08:11:56.1874277-08:00 Error: ConfigureOverridesForDWRules error: System.TimeoutException : The requested operation timed out.
Exception thrown by custom action:
System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> Microsoft.WindowsInstaller.InvalidHandleException: The handle is invalid.
at Microsoft.WindowsInstaller.SessionProperties.set_Item(String name, String value)
at Microsoft.Reporting.Setup.ReportingManagedCAs.ConfigureOverridesForDWRules(Session session)
--- End of inner exception stack trace ---
at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object parameters, CultureInfo culture, Boolean skipVisibilityChecks)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object parameters, CultureInfo culture)
at Microsoft.WindowsInstaller.CustomActionProxy.InvokeCustomAction(Int32 sessionHandle, String entryPoint)
CustomAction _ConfigureOverridesForDWRules.9B663534_CD9B_41CC_9D93_4E84D3C5E165 returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
MSI (s) (38:4C) [08:11:56:281]: NOTE: custom action _ConfigureOverridesForDWRules.9B663534_CD9B_41CC_9D93_4E84D3C5E165 unexpectedly closed the hInstall handle (type MSIHANDLE) provided to it. The custom action should be fixed to not close that handle.
Action ended 8:11:56: InstallFinalize. Return value 3.
MSI (s) (38:6C) [08:11:56:359]: User policy value 'DisableRollback' is 0
MSI (s) (38:6C) [08:11:56:359]: Machine policy value 'DisableRollback' is 0
MSI (s) (38:6C) [08:11:56:624]: Executing op: Header(Signature=1397708873,Version=500,Timestamp=1133657144,LangId=1033,Platform=589824,ScriptType=2,ScriptMajorVersion=21,ScriptMinorVersion=4,ScriptAttributes=1) -
Operations Manager Setup Error
I am attempting to install Operations Manager. My configuration is as follows:
My O/S is:
Windows Server 2008 R2 Enterprise w/ Service Pack 1 x64
My Sql Version is:
Microsoft SQL Server 2012 (SP1) - 11.0.3000.0 (X64)
Business Intelligence Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1)
The login is set to Windows Authentication only
I am installing System Center 2012 R2 from
SW_DVD5_Sys_Ctr_2012_R2_English_OpsMgr_MLF_X19-18307 (From Action Pack)
The Sql Server is running a Named Instance
On the Configure the operational database page, when I click next I get:
"The installed version of SQL Server could not be verified or is not supported..."
I have searched and searched but I can not find any solution that seems to work. What am I missing?Hi,
SQL Business Intelligence Edition is not supported
SQL Server in System Center 2012 R2
http://technet.microsoft.com/en-us/library/dn281933.aspx
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
Connected Operations Manager - VMM, can see the server and status - cannot see Summary Data
I was able to connect OpMgr SP 1 and System Center R2 VMManager. I was able to discover my servers and SQL Servers. I am getting the Red X in the Database Summary on the OpMgr Dashboards (Free Space and Performance), I am able to see the Databases.
The error message is below, I have tried 5 things from the internet with no solution yet. Before I make a big mistake, I would like a second opinion. This is my first time installing OprManager. Thanks
Please provide the following information to the support engineer if you have to contact Microsoft Help and Support :Microsoft.EnterpriseManagement.Presentation.DataAccess.DataProviderException: An error occurred
executing the command: [Microsoft.EnterpriseManagement.Presentation.DataProviders.Library!PerformanceDataProvider/ResolvePerformanceCounterSeries] in provider: [Microsoft.EnterpriseManagement.Presentation.DataProviders.PerformanceDataProvider, Microsoft.EnterpriseManagement.Presentation.DataProviders.Library,
Version=7.0.5000.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35].Unable to execute stored procedure needed for dashboard. If you just installed Operations Manager Reporting Server, please wait a while and try again. This can also occur if the Operations
Manager Reporting Server SQL Server is not started or inaccessible. ---> Microsoft.EnterpriseManagement.Presentation.DataProviders.DataWarehouseException: Unable to execute stored procedure needed for dashboard. If you just installed Operations Manager
Reporting Server, please wait a while and try again. This can also occur if the Operations Manager Reporting Server SQL Server is not started or inaccessible. ---> Microsoft.EnterpriseManagement.Common.UnknownDatabaseException: Could not find stored procedure
'SDK.Microsoft_SystemCenter_Visualization_Library_PerformanceCounterListByManagedEntityUsingContainerME'.at Microsoft.EnterpriseManagement.Common.Internal.ServiceProxy.HandleFault(String methodName, Message message)at Microsoft.EnterpriseManagement.Common.Internal.MonitoringDataWarehouseServiceProxy.GetDataWarehouseStoredProcedureResult(String
SpName, StoredProcedureParameterCollection param, IEnumerable`1 columnFilter, Int32 timeout)at Microsoft.EnterpriseManagement.Warehouse.DataWarehouse.GetDataWarehouseData(String storedProcedureName, StoredProcedureParameterCollection param, IEnumerable`1 columnFilter,
Int32 timeout)at Microsoft.EnterpriseManagement.Monitoring.PerformanceDataReader.GetPerformanceCountersByObjectCounterInstanceManagedEntity(ManagementGroup connection, String perfObjectName, String perfCounterName, String perfCounterInstanceName, Guid[] managedEntityIds,
Boolean getDistinctPerfCounters)at Microsoft.EnterpriseManagement.Presentation.DataProviders.PerformanceDataProvider.GetPerformanceCountersByObjectCounterInstanceManagedEntity(String perfObjectName, String perfCounterName, String perfCounterInstanceName, Guid[]
managedEntityIds, Boolean getDistinctPerfCounters)--- End of inner exception stack trace ---at Microsoft.EnterpriseManagement.Monitoring.DataProviders.RetryCommandExecutionStrategy.Invoke(IDataProviderCommandMethodInvoker invoker)at Microsoft.EnterpriseManagement.Presentation.DataAccess.DataProviderCommandMethod.Invoke(CoreDataGateway
gateWay, DataCommand command)--- End of inner exception stack trace ---at Microsoft.EnterpriseManagement.Presentation.DataAccess.DataProviderCommandMethod.Invoke(CoreDataGateway gateWay, DataCommand command)at Microsoft.EnterpriseManagement.Presentation.DataAccess.CoreDataGateway.ExecuteInternal[TResult](DataCommand
command)at Microsoft.EnterpriseManagement.Presentation.DataAccess.CoreDataGateway.<ExecuteAsync>b__0[TResult](<>f__AnonymousType0`1 data)Hi,
Please remove and re-add the profile targeting the report part.
In addition, you may check the similar thread as below:
SCOM12 deploy 2nd server, data reader account different
https://social.technet.microsoft.com/forums/systemcenter/en-US/09430f25-4884-4e04-86f6-5127548f20fb/scom12-deploy-2nd-server-data-reader-account-different
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. -
Hello Team,
We have DPM installed in our environment for backup.
We want to implement Central Console for centralized administration. I understood that to install central console we have to install operation manager first and then install central console.
I want to know if we need a license for operation manager to install and if yes then what could be the cost of the license?
Regards,
Suman RoutHi,
We have System Center 2012 DPM installed in our environment.
If any license is not required then how do I install Central Console for centralised DPM Administration. I tried installing Central Consol but I got an error as Need to install Operation Manager first. As Central Console can only be installed on Operation
Manager Server.
NOTE: We do not have Operation Manager or SCOM installed in our environment.
Could you please also let me know the steps to install.
Regards,
Suman Rout -
Basic Network Monitoring for Cisco Operation Manager 2012
Hello,
Please bear with me as i'm new the Operations Manager 2012 world. I've just installed operations manager 2012 in our environment and i've setup a network management point. I've discovered my networking gear which is primarily cisco equipment. The devices
are appearing as CERTIFIED. It appears that they are HEALTHY however in most cases i'm getting some arbitrary monitors. I have a 6509 switch where memory and processor appear to be being monitored out of the box. I'm receiving alerts and everything.
My question is how do I turn on monitoring for other discovered components. I seem to understand I can make SNMP monitors under the authoring pane if i know the OID. That sounds like it'd be tedious work for such a simple and basic monitor. However I was
under the impression I would be able to monitor a lot of these components with a simple click of a button. Is this not the case? I'm primarily interested in monitoring the state and performance of particular interfaces as well as the state of the power supplies
in our switches. Is there a guide that explains the basic principles of this. What are my options?
Thanks!
-BrandonHi,
You will need to edit the discovery and broaden the range. You may use recursive discovery.
Recursive discovery will try to discover any other network devices it knows about through its Address Routing Protocol (ARP) table, its IP address table, or the topology Management Information Block (MIB) to grow the network map and present all applicable
devices to you for monitoring.
You can also filter out devices that you don't want to be discovered by using properties such as the device type, name, and object identifier (OID). This is a handy option if you wanted to quickly discover all the network devices in your network except,
a small number or some with a specific criteria.
In really large networks with a lot of network devices, keep in mind that there is a default limit of 1500 network devices that can be discovered recursively. You can of course tweak this limit to suit your environment if you wish, but for most people, this
won't be needed.
More details, please go through the article below:
http://kevingreeneitblog.blogspot.com/2012/07/scom-2012-network-monitoring-explicit.html
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]
Maybe you are looking for
-
Invoice wise pending GR/IR report
hello , can anyone tell me how to find the invoice wise pending goor receipt and invoice receipt details , what tables contain that data. i need to write the report on the basis of GL account,,posting date and document type . thanks
-
Photos folder in my photo app on my iPhone /iPad
Greetings. I cannot find this info anywhere In my photo app, (not iphoto) in the folder of Photos, I have some really old pictures in there. I have removed them long ago from my iPhone under albums and iCloud But they show up under Photos and I do n
-
How to configure smtp mail?
I am trying to configure my email at the iPad, but the smtp is not working. What do I need to do?
-
Enhancement: PL/SQL Package decomposition
Can I put in a plea for raptor to use the jdeveloper style of decomposition for PL/SQL objects at least. The structure of the object which is being edited in the main window (or selected in the connections tree) is displayed in a separate structure p
-
Inserting/manipulating PDF in Flex 3 AIR project?
I've read as much as I can find about dropping a PDF into my Flex 3 AIR project, but the information is scarce and I understand it's a very new (not fully baked) feature. Can anyone describe what component to use to drop a PDF into my AIR project? I