Error installing Oracle 10.2.0.4 on windows 2008 r2
Hi,
I am trying to installing SAP netweaver 7.01 server on oracle 1.2.0.4 in Windows 2008 64-bit system.
But when I try to install oracle I get this error.
Checking operating system version: must be 5.1 or 5.2. Actual 6.0
I did search on sdn at the pam matrix it should be possible. And according to OSS note 1326698 it is supported on Windows 2008.
Any help?
Reza
Hej Bhavik,
Are you Installing Enterprise Edition of Oracle 10.2.0.4 64bit ?
Yes I am installing ORACLE-10.2-rdbms 64bit.
Administrator user is in use for performing the Installation ?
Yes Administrator user is in use
I Check the PAM at http://service.sap.com/pam.
Also refer this SAP Note 1303262 - Oracle on Windows Server 2008 along with the Installation Guide.
Yes I did refer to note 1303262.
I did fundet Note 980426 - Oracle 10.2 Software installation on new operating systems from a link you give me.
There is 4 workaround but I do not know this can help me.
I make a copy of installation cdu2019es on my server and I try to install oracle from there.
I want to try workaround 3 from sso notes: I download RUNINSTALLER.ZIP file.
But I can not find RUNINSTALLER on my installation file.
It is first time I am installing Oracle bd.
Any help?
Reza
Similar Messages
-
Can we install Oracle Database 10g 32 bit on Windows 2008 64bit
Can we install Oracle Database 10g 32 bit on Windows 2008 64bit will there be any disadvantages, will all the features of Oracle database work ( Like Data Guard , OEM, Grid Control).
Solution will be appriciated.Hi,
If it is true can you please give me some reference doc, as per my knowledge installing Oracle Database 10g 32 bit on Windows 2008 64bit must be possible.
Thanks & Redards -
Installing Oracle Application Server 10g 101202 on Windows 2008 64 bit
Hi All,
what i need to do is install this software like this:
installing Oracle Infrastructure to handel Sessions as db for oracle forms & reports
install Oracle Forms & Reports Service as Middle-Tire on the same machine in defirent home
configure my report server as i require it to work with rdf files in spechial folders
i have done this installation more than i can remember in Windows 2003 R2 SP2 32 bit
but for Windows Server 2008 i am facing some problem that there is no software avilable for 64 bit or Windows 2008 in Oracle Download Site
Spechilaly when my server is not itanum !
Can any one point me to the right download page if avilable or another solution for this problem
i don't think that oracle have stopped support for this product spechilaly when the reports generated by Oracle Report Service is far to good and fast with Oracle Database
Best Regards
IbrahimHi Ibrahim,
You should decide what you require.
32bit version can be installed on 64bit server and this should work fine (check the certification matrix for this).
The "problem" is that you would not gain any performance benefit from the 64bit server
If you want to have benefit you can upgrade the JVM to 64 bit version.
I did this 3 years ago and I do not remember exact steps though everything worked OK.
WARNING:
this can be unsupported, ask support to be sure
- Install the 32 bit version on the server
- Download 64 bit Java JRE/JDK and install it (well, you can search the same release as included in the AppServer or try newer one, 7 for example)
- later, reconfigure the appserver so it uses the version you've installed, OR Copy the everything from c:\progfiles\java\... to the directory OraHome\... (forgot exact directories)
try to search the forum, there had been a thread with the same question
regards, michael
Edited by: MickleSh on Sep 27, 2011 9:59 AM -
Error installing Oracle 10g Express Editon on 64bit windows
After downloading the executable file, when I try to run it I get "Error Reading setup Initialization file"
I guess your download is corrupt.
Strangely there are no checksums provided for the exe files at the download page so you are not able to check your file :(
Try to download again. -
EM is not running for Oracle 10.2.0.5 on windows 2008 R2
Hi,
Recently, I installed oracle 10.2.0.4 on Windows 2008 R2 server followed by 10.2.0.5 patchset and 8350262 patch (to solve the problem of the expired certificate).
After the installation, I created listener and database. The EM was working fine for few hours but not running after that. Listener was running all the times.
I tried to to execute "emctl stop dbconsole" and "emctl start dbconsole".
The EM worked again. However, it down again after few hours. I have repeated this process many times but still cannot resolve the this.
I checked the logfiles in in the sysman/log. Herewith the output.
emagent.trc
2013-06-17 11:05:24 Thread-4100 WARN http: snmehl_connect: connect failed to (dkcopeoradb001.FALCKDKWEB:1158): No connection could be made because the target machine actively refused it.
(error = 10061)
2013-06-17 11:09:27 Thread-3520 ERROR ssl: nzos_Handshake failed, ret=28862
2013-06-17 11:09:27 Thread-3520 ERROR http: 296: Unable to initialize ssl connection with server, aborting connection attempt
Please advise and assist.
Thanks.
Regards,
Jia70d23884-cf5e-4be4-9c7b-5572c797bae9 wrote:
Hi,
Recently, I installed oracle 10.2.0.4 on Windows 2008 R2 server followed by 10.2.0.5 patchset and 8350262 patch (to solve the problem of the expired certificate).
After the installation, I created listener and database. The EM was working fine for few hours but not running after that. Listener was running all the times.
I tried to to execute "emctl stop dbconsole" and "emctl start dbconsole".
The EM worked again. However, it down again after few hours. I have repeated this process many times but still cannot resolve the this.
I checked the logfiles in in the sysman/log. Herewith the output.
emagent.trc
2013-06-17 11:05:24 Thread-4100 WARN http: snmehl_connect: connect failed to (dkcopeoradb001.FALCKDKWEB:1158): No connection could be made because the target machine actively refused it.
(error = 10061)
2013-06-17 11:09:27 Thread-3520 ERROR ssl: nzos_Handshake failed, ret=28862
2013-06-17 11:09:27 Thread-3520 ERROR http: 296: Unable to initialize ssl connection with server, aborting connection attempt
Please advise and assist.
Thanks.
Regards,
Jia
Why are you bothering to install a de-supported version of Oracle? 10.2 is history and even 11.2 is at terminal release. The bookies are taking money on when 12c will be released.
When I googled "No connection could be made because the target machine actively refused it." I got many, many hits that look useful. -
Error installing Oracle 10.2.0.4
Hi all,
I am installing oracle 10.2.0.4 on Windows server 2008 R2 standard 64 bit. For this i have downloaded the CD 51036971_4 from SAP marketplace. But when i go for setup it gives me the following error:
Checking Operating system version: must be 5.0, 5.1, 5.2 or 6.0. Actual 6.1
Failed <<<<
Please help
Regards
Akshay KoradeJust do a clean install of Windows Server 2008 R2 x64, do NOT configure your server yet, do NOT install any updates.
Use the correct and only certified install source from: http://www.oracle.com/technetwork/database/10204-winx64-vista-win2k8-082253.html "10204_vista_w2k8_x64_production_db.zip"
Unpack and open a command prompt in the "..\database" directory where the "setup.exe" is located.
Run the following command: setup.exe -ignoreSysprereqs
Wait for the OUI windows and continue with your preferences selections.
When the OUI prerequisites window appear it will come with the following error:
INFO: The user has manually verified 'Checking operating system requirements ...'
INFO: Checking CertifiedVersions
This is a prerequisite condition to test whether the Oracle software is certified on the current O/S.
INFO: Expected result: One of 5.0,5.1,5.2,6.0
Actual Result: 6.1
Check complete. The overall result of this check is: Failed <<<<
Select the checkbox to bypass the error and continue installation
Download and unpack the 10.2.0.5 Patch Set from My Oracle Support and install it.
Have fun with you Oracle 10g x64 on a Windows Server 2008 R2 x64!
Regards,
Maurice -
ANY ONE THERE TO SOLVE THIS ERROR INSTALLING ORACLE APPLICATION SERVER 4.0.7 .
I AM INSTALLING ORACLE APPLICATIONSERVER 4.0.7 FOR WINDOWS NT4.0
I AM USING AMDK62 366 HZ. 192 MB RAM
AFTER ENTERING THE SITE INFORMATION I AM GETTING AN ERROR SAYING THAT
OWS.VRF(1502)READ_ERROR WHILE TRANSLATING OWS.TCPPORT FROM
D:ORANT\ORAINST\OWS_PORT.STAT
D IS MY HARD DRIVE.
CAN ANY ONE HELP ME.
i first thought its some device reading error
but its only failing at that point and i am
not able to procede further is there any one to solve this.Thanks to all of them who read my problem and tryed to solve it
I my self figured out the problem yesterday night.
I looked at the error message closely
the path in it said D:ORANT/ORAINST/OWS_PORT.STAT
sorry in my topic I didnot typed like this
please forgive me.
when I am looking at path I found the path is cruked you see there are forward and backward slashes so I thought may be its confusing while reading so I copyed entire CD to hard drive opend ows.vrf and changed manully the path to replace the backward slash with forward saved the file and now I tried to Install.
At last I installed OAS.
My next job is to post install OAS to configure 8i and OAS.
When I came today I got mail from Oracle support suggesting me to click on startup.exe
instead of allowing it to auto run.
I tried this also but not from CD but Copying entire cd to hard drive even then I got same error.
I mailed my solution to them.
I guess its time to open up a FORUM entirely for OAS on windows NT problems
null -
RW-50004 error when installing Oracle EBS 12.1.1 on Windows 32 bit, 2003
Hi All
I am installing Oracle EBS 12.1.1 for Windows 32 bit on a Windows 2003 server, my pre-requisite checks have gone through successfully when checked by the oracle ebs installer.
However during the installation process i get RW-50004 error and the installation stops, the log file seems to have the following last entries
Mon 07/04/2011
05:05 PM
1 file(s) copied.
1 file(s) copied.
1 file(s) copied.
"afmkinit.cmd exiting with status 0"
ERRORCODE = 0 ERRORCODE_END
.end std out.
.end err out.
Skipping Profile Phase
Skipping Apply Phase
adcvmlog.xml renamed to C:\oracle\VIS\db\tech_st\11.1.0\appsutil\log\VIS_99a4659\adcvmlog.xml.07041705
[AutoConfig Error Report]
The following report lists errors AutoConfig encountered during each
phase of its execution. Errors are grouped by directory and phase.
The report format is:
<filename> <phase> <return code where appropriate>
[SETUP PHASE]
AutoConfig could not successfully execute the following scripts:
Directory: C:\oracle\VIS\db\tech_st\11.1.0\appsutil\install\VIS_99a4659
adsvdlsn.cmd INSTE8_SETUP 9020
AutoConfig is exiting with status 1
RC-50014: Fatal: Execution of AutoConfig was failed
Raised by oracle.apps.ad.clone.ApplyDBTechStack
Can some one please help me on what I am missing or how can i correct this. Thank you.adsvdlsn.cmd INSTE8_SETUP 9020Search AutoConfig log file for adsvdlsn.cmd and you should find more details about the error.
Please see if (Rapidwiz R12 Failed at 66% with error: RW-50004: Error code received when running external process. [ID 418109.1]) is applicable.
Also, please run md5sum as per (MD5 Checksums for R12.1.1 Rapid Install Media (Doc ID 802195.1)) to verify the integrity of the stage area directory.
Thanks,
Hussein -
Error installing Oracle Developer 10g R2
First off, please let me know if this is the wrong forum.
I'm trying to install Oracle Dev 10g R2 on a Windows XP SP3 x86 computer, but I'm getting an error every time I start it. We have it extracted to two folders, one for disk 1 and one for disk 2. I go into disk 1, install, and click setup.exe. The command prompt comes up, I can see it say everything passes, then after maybe 10 seconds it crashes while trying to load the Oracle Universal Installer. The error message is: "An unhandled win32 exception occurred in setup.exe [2320]".
I only have Visual Studio 2005 installed right now (we're trying to create a base image to make system deployment easier, and the dev that needs this particular laptop requires a different version of VS than the rest of the devs so I haven't installed 2008 or 2010 yet). Could that be the cause? Does 10g R2 require VS 2008 or 2010 to be installed or something?
Any help would be greatly appreciated.
Steve
Edited by: user13479334 on Dec 14, 2010 12:03 PMI re-imaged the laptop, and the install went through this time.
-
Install oracle 10.2.0.5 on windows 7 32 bits
Hi all ,
I want to install oracle 10.2.0.5 on windows 7 (32bits) but in the websit I found <B>"Oracle Database 10g Release 2 (10.2.0.5) Enterprise/Standard Edition for Microsoft Windows (64-bit Itanium)" [http://www.oracle.com/technetwork/database/10201winsoft64-090455.html] </B>, and in the documentation I found : <B>"Oracle Database and Oracle Database Client 10g Release 2 (10.2.0.5 or later) are supported on Windows 7 (32-bit and x64)."</B>.
Could you please tell me whether this oracle client for win 7 32bits or give me the link wher I can download oracle for win 7 32bits.
Many thanks,10.2.0.5 is a patchset that you will need to download from My Oracle Support. You will need a valid CSI with Oracle for you to download the patch. I suggest you to install the 11gR2 Client on Windows 7.
Can you please tell me which version of Oracle Server will you be interacting with using the 10.2.0.5 Client. -
Problem in installing Oracle 11g in home edtion of windows xp
i m trying to install Oracle 11g in home edition of windows xp. it is trelling some files not found. plz help me.!!!!!!!!!
Upgrade to XP Professional, Home Edition is not supported.
Werner -
ERROR INSTALLING JINITIATOR 1.3.1.22 ON WINDOWS 98
We are Migrating from iAS 9.0.4 to 10.1.2.0.2, consequently I also have to migrate the JInitiator on the client side.
When I install JInitiator 1.3.1.22 on Windows 98, it Fails, I get this error :
Error number 0x80070725
Description : incompatible version of the RPC stub
Setup will now terminate
Why is this problem happen ?
I have installed this version of JInitiator 1.3.1.22 on some Win98 PCS, some works and the others do not.
Thank you,
xtantowasnt this answered here
ERROR INSTALLING JINITIATOR 1.3.1.22 ON WINDOWS 98 -
Installing Oracle Discoverer Reports 4.1 in Windows Vista
Hi Guys............Greetings...
Can we install Oracle Discoverer Reports 4.1 in Windows Vista?
If not any patch available to install the same in WInsows VISTA?
Thanks in advance.
Dave SureshGo to metalink
Click on the Certify tab
Click on the second link "View certification by Platform"
If it isn't there then it is not certified.
That is the answer to the question you asked.
My advice is still that you get a decent operating system: Certified or not. -
How to install oracle Forms and Report 10g in windows XP OS
How to install oracle Forms and Report 10g in windows XP OS. Already installed oracle Database 10g in my notebook.
It is working good.
please help me this issue.
please give the steps..............
Thanks
RajeevHello Frank,
for development, you need to install Oracle Developer
Suite 10g. This includes Forms and Reports.this topic interests me too, because I've downloaded Developer Suite and Database (both for 10g) from Oracle website, installed them, but I couldn't connect to a database.
What should be done for me to create a database link and be able to connect locally, in my personal Desktop computer? (Not to a server)
Once it was told me here that I should download 10g Database - I did it, and installed it, but it didn't work. Later, some of my job partners said I should install them in a sequence - that is, 1st the Developer, and 2nd the Database. But it has failed too. And I don't know how to configure a database connection.
Best regards, -
Oracle 10g HTTP Web Server on Windows 2008 R2 (64-bit) server.
I downloaded the Oracle 10g HTTP server for Windows 2008 R2 (64-bit) from the link below
http://www.oracle.com/technetwork/database/10204-winx64-vista-win2k8-082253.html
10204_vista_w2k8_x64_production_companion.zip (344,455,851 bytes)
Did anyone have luck installing the 10g HTTP server on a Windows 2008 R2 (64-bit) server ?
I could see the installation went fine, but I don't see any "Oracle_HTTP" windows service getting created.I have not installed on this OS but I'm betting the service is a different name.
Check "log on as" under services to narrow your search
Maybe you are looking for
-
Is there any need for an InDesign user to use InCopy as well?
We are looking to do a software refresh from CS3 to CS5, and when auditing users we discoverd a handful of people that are using InDesign and InCopy. My previous thoughts about InCopy, was that the program isn't needed if you have InDesign, but user
-
EtreCheck version: 2.1.5 (108) Report generated 23 December 2014 14:35:23 GMT Click the [Support] links for help with non-Apple products. Click the [Details] links for more information about that line. Click the [Adware] links for help removing adwar
-
Migration Accelerator - Process Server not showing up in CX Configuration
For the part of the documentation where you establish what the process server is in the CX agent settings. I went to do that setting, but the Process Server never shows up. I have given it a few days and it still doesn't fill in the box.
-
Hi all , In my application server 4.7ee the session is been terminated while creating a purchase order . I am getting a dump error , I had pasted the dump analysis here: Process terminated by signal 0. What happened? The current ABAP program ha
-
How to display name in the posting rather than number
Hello All, I want my name to be dispayed instead of 403868, what should I do? Regards