Error installing Oracle Database 11gR2

Hi friends,
I have a problem when trying to install the Oracle Database 11g R2 v.11.2.0.1.0, the installation wizard reports the following error messages:
- (PRVF-4354) Hard Limit: maximum open file descriptors: (Expected Value: 65536), Actual Value: 4096
- (PRVF-4132), Multiple users "root, user1" with UID "0"
As I can solve these problems install Oracle Database 11g R2.
Also present prior to these errors the following message [INS-32 055], a recommendation at this warning.
Thanks for the support

Luis_vkacito wrote:
Hi friends,
I have a problem when trying to install the Oracle Database 11g R2 v.11.2.0.1.0, the installation wizard reports the following error messages:
- (PRVF-4354) Hard Limit: maximum open file descriptors: (Expected Value: 65536), Actual Value: 4096
- (PRVF-4132), Multiple users "root, user1" with UID "0"
As I can solve these problems inastalar Oracle Database 11g R2.
Also present prior to these errors the following message [INS-32 055], a recommendation at this warning.
Thanks for the supportWhen all else fails Read The Fine Manual
http://www.oracle.com/pls/db112/portal.portal_db?selected=11&frame=
Installation Guide

Similar Messages

Installing Oracle Database 11gR2 on Linux with Unbreakable Ente. Kernel

Hello,
I have Oracle Linux 5.5 with Oracle's Unbreakable Enterprise Kernel.
what do I need to have/prepare to install Oracle database 11gR2 on it?
the hardware part and the partitions are done!
1-
Do I need to install/run Oracle Validated Configuration RPM? even if I have Oracle's Unbreakable Enterprise Kernel?
if yes does in means the Oracle's Unbreakable Enterprise Kernel does not prepare/configure the system to host database?
2-
With any of the above
do I still need create or edit the /etc/sysctl.conf file, and add or edit lines similar to the following:
fs.aio-max-nr = 1048576
fs.file-max = 6815744
kernel.shmall = 2097152
kernel.shmmax = 536870912
kernel.shmmni = 4096
kernel.sem = 250 32000 100 128
net.ipv4.ip_local_port_range = 9000 65500
net.core.rmem_default = 262144
net.core.rmem_max = 4194304
net.core.wmem_default = 262144
net.core.wmem_max = 1048586
I saw allot of docs out there, but none answered these questions!
so please do not post docs or links to a general sites!
Thank you for the help

Dude wrote:
The intention of Oracle UEK is quite obviously Oracle specific, so I think it is legitimate to ask why not to include the Oracle specific kernel configuration file. The UEK is a drop-in replacement for the existing kernel. Why would we include the oracle-validated configuration options into the kernel package when we already have a perfectly good oracle-validated RPM that can be used with both kernels? Also, the UEK may be Oracle specific, but it's not database specific. Keep in mind that Oracle has thousands and thousands of products. :) I run the UEK on lots and lots of servers, many of which don't run database and many of which have completely different /etc/sysctl.conf configurations.
The list of available packages and add-on's at http://public-yum.oracle.com/repo/OracleLinux/OL5/5/base/x86_64/ is growing. So perhaps it's just a matter of continued development.
Not sure what the point of this statement is: there are no plans to incorporate the oracle-validated configuration into the kernel, as it already exists in oracle-validated.

ERROR install oracle database 10gR2 in solaris sparc 64

Dear All,
I got error when installing oracle database 10gR2 on solaris sparc 64.
these are the messages:
/usr/ccs/bin/make -f ins_precomp.mk relink ORACLE_HOME=/usr/app/oracle/product/10.2.0/db_1 EXENAME=proc/Linking /usr/app/oracle/product/10.2.0/db_1/precomp/li
b/proc
ld: fatal: file /usr/app/oracle/product/10.2.0/db_1/lib32/libclntsh.so: unknown file type
ld: fatal: File processing errors. No output written to /usr/app/oracle/product/10.2.0/db_1/precomp/lib/proc
*** Error code 1
The following command caused the error:
echo "Linking /usr/app/oracle/product/10.2.0/db_1/precomp/lib/proc"; \
rm -f /usr/app/oracle/product/10.2.0/db_1/precomp/lib/proc; \
/usr/ccs/bin/ld -o /usr/app/oracle/product/10.2.0/db_1/precomp/lib/proc -L/usr/app/oracle/product/10.2.0/db_1/precomp/lib/ -L/usr/app/oracle/product/10.2
.0/db_1/lib/ -dy /usr/app/oracle/product/10.2.0/db_1/lib/prod/lib/v9/crti.o /usr/app/oracle/product/10.2.0/db_1/lib/prod/lib/v9/crt1.o /usr/app/oracle/product
/10.2.0/db_1/lib/s0main.o /usr/app/oracle/product/10.2.0/db_1/precomp/lib/pdc.o /usr/app/oracle/product/10.2.0/db_1/precomp/lib/pds.o /usr/app/oracle/product/
10.2.0/db_1/precomp/lib/libproc2.a /usr/app/oracle/product/10.2.0/db_1/lib/libslax10.a /usr/app/oracle/product/10.2.0/db_1/precomp/lib/libpgp.a -lpls10 -lplp
10 /usr/app/oracle/product/10.2.0/db_1/lib/libplc10.a -lsnls10 -lunls10 -lnls10 /usr/app/oracle/product/10.2.0/db_1/rdbms/lib/kpudfo.o -lclntsh `cat /usr/ap
p/oracle/product/10.2.0/db_1/lib/ldflags` -lnsslb10 -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat /usr/app/oracle/product/10.2.0/db_1/lib/
ldflags` -lnsslb10 -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lmm -lsnls10 -lnls10 -lcore10
-lsnls10 -lnls10 -lcore10 -lsnls10 -lnls10 -lxml10 -lcore10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 `cat /usr/app/oracle/product/10.2.0/db_1/lib/ldflags`
-lnsslb10 -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat /usr/app/oracle/product/10.2.0/db_1/lib/ldflags` -lnsslb10 -lncrypt10 -lnsgr10
-lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lpls10 -lsnls10 -lnls10 -lcore10 -lsnls10 -lnls10 -lcore10 -lsnls10 -
lnls10 -lxml10 -lcore10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lsnls10 -lnls10 -lcore10 -lsnls10
-lnls10 -lcore10 -lsnls10 -lnls10 -lxml10 -lcore10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 `cat /usr/app/oracle/product/10.2.0/db_1/lib/sysliblist` -R
/opt/SUNWcluster/lib/sparcv9:/usr/app/oracle/product/10.2.0/db_1/lib:/opt/ORCLcluster/lib/ -Y P,:/opt/SUNWcluster/lib/sparcv9:/opt/ORCLcluster/lib/:/usr/ccs
/lib/sparcv9:/usr/lib/sparcv9 -Qy -lc -laio -lposix4 -lm /usr/app/oracle/product/10.2.0/db_1/lib/prod/lib/v9/crtn.o; \
/bin/chmod 755 /usr/app/oracle/product/10.2.0/db_1/precomp/lib/proc
make: Fatal error: Command failed for target `/usr/app/oracle/product/10.2.0/db_1/precomp/lib/proc'
/usr/ccs/bin/make -f ins_precomp.mk relink ORACLE_HOME=/usr/app/oracle/product/10.2.0/db_1 EXENAME=proc/Linking /usr/app/oracle/product/10.2.0/db_1/precomp/li
b/proc
ld: fatal: file /usr/app/oracle/product/10.2.0/db_1/lib32/libclntsh.so: unknown file type
ld: fatal: File processing errors. No output written to /usr/app/oracle/product/10.2.0/db_1/precomp/lib/proc
*** Error code 1
any help would be appreciate.
Thank you
Regards,
Spirit

I'm not sure with the solaris sparc 64.
but the most common problem with Linux x86_64 which I assume probably similar. that type of error caused by
you have to install glibc-devel-32 bit and libstdc++-devel 32 bit together with your 64 bit. both libraries required by the Oracle to solve the linking problem.
http://forums.oracle.com/forums/thread.jspa?messageID=1254866
probably it will help you.
sorry, this is just my guessing of your problem.
thanks

Error installing oracle database on windows xp

Hello,
I've been trying to installing oracle db on my system but it keeps throwing this error:
'OUI-10151: There was an error while loading library: generalQueries'.
Please advice me on how this problem can be solved.
Regards,
Toyosi

Did you ever find a solution to this? I'm getting an OUI-10151 during a fresh/clean install, not an upgrade, on Windows 2003 Enterprise SP2. The software source was used previously without issues.

Echec to install Oracle database 11gr2 in OEL5.6, OEL 5.5 and RHEL 5.6

I try to install Oracle 11gr2 in Linux with the traditionnal installation but after several installation test i am disappointed.
i make test on several distribution of Linux 64bits (OEL 5.6, OEL 5.5, RHEL 5.6) and SAME result : The installation of Oracle stop at 81 % .
I have installed the packages required with the command line : yum install oracle-validated
I thinks it's a problem of library but what library ?
Thanks you by advance.
The log of my install :
INFO: gcc -o ctxhx -m64 -L/oracledata/product/11.2.0/dbhome_3/ctx/lib/ -L/oracledata/product/11.2.0/dbhome_3/lib/ -L/oracledata/product/11.2.0/dbhome_3/lib/stubs/ /oracledata/product/11.2.0/dbhome_3/ctx/lib/ctxhx.o -L/oracledata/product/11.2.0/dbhome_3/ctx/lib/ -lm -lsc_fa -lsc_ex -lsc_da -lsc_ca -lz -lctxhx -Wl,-rpath,/oracledata/product/11.2.0/dbhome_3/ctx/lib -lsnls11 -lnls11 -lcore11 -lsnls11 -lnls11 -lcore11 -lsnls11 -lnls11 -lxml11 -lcore11 -lunls11 -lsnls11 -lnls11 -lcore11 -lnls11 `cat /oracledata/pro
INFO: duct/11.2.0/dbhome_3/lib/sysliblist`
INFO: /usr/bin/ld: warning: libwv_core.so, needed by /oracledata/product/11.2.0/dbhome_3/ctx/lib//libsc_fa.so, not found (try using -rpath or -rpath-link)
/usr/lib64/libstdc++.so.5: undefined reference to `__stack_chk_fail@GLIBC_2.4'
/oracledata/product/11.2.0/dbhome_3/ctx/lib//libsc_fa.so: undefined reference to `SYSNativeFree'
/oracledata/product/11.2.0/dbhome_3/ctx/lib//libsc_fa.so: undefined reference to `SNLoadLibrary'
/oracledata/product/11.2.0/dbhome_3/ctx/lib//libsc_da.so: undefined reference to `Win32VIn
INFO: it'
/oracledata/product/11.2.0/dbhome_3/ctx/lib//libsc_fa.so: undefined reference to `SNDestroyCriticalSection'
/oracledata/product/11.2.0/dbhome_3/ctx/lib//libsc_fa.so: undefined reference to `SNGetProcAddress'
/oracledata/product/11.2.0/dbhome_3/ctx/lib//libsc_fa.so: undefined reference to `SYSNativeAlloc'
/oracledata/product/11.2.0/dbhome_3/ctx/lib/libsc_ut.so: undefined reference to `Win32VCreateHandle'
/oracledata/product/11.2.0/dbhome_3/ctx/lib//libsc_fa.so: undefined reference to `Win32VBailOut'
/ora
INFO: cledata/product/11.2.0/dbhome_3/ctx/lib//libsc_fa.so: undefined reference to `Win32VPushBailOutEx'
/oracledata/product/11.2.0/dbhome_3/ctx/lib//libsc_fa.so: undefined reference to `SPStringConcat'
/oracledata/product/11.2.0/dbhome_3/ctx/lib//libsc_da.so: undefined reference to `Win32VDeinit'
/oracledata/product/11.2.0/dbhome_3/ctx/lib//libsc_fa.so: undefined reference to `SYSNativeLock'
/oracledata/product/11.2.0/dbhome_3/ctx/lib//libsc_fa.so: undefined reference to `__gxx_personality_v0@CXXABI_1.2'
/oracle
INFO: data/product/11.2.0/dbhome_3/ctx/lib/libsc_ut.so: undefined reference to `Win32VGetOutputSolutionByName'
/oracledata/product/11.2.0/dbhome_3/ctx/lib//libsc_fa.so: undefined reference to `SYSNativeUnlock'
/oracledata/product/11.2.0/dbhome_3/ctx/lib//libsc_ex.so: undefined reference to `SYSNativeReAlloc'
/oracledata/product/11.2.0/dbhome_3/ctx/lib//libsc_fa.so: undefined reference to `SNCreateCriticalSection'
/oracledata/product/11.2.0/dbhome_3/ctx/lib/libsc_ut.so: undefined reference to `Win32VGetOutputVtabl
INFO: e'
/oracledata/product/11.2.0/dbhome_3/ctx/lib//libsc_fa.so: undefined reference to `SPStringToBytes'
/oracledata/product/11.2.0/dbhome_3/ctx/lib//libsc_fa.so: undefined reference to `SPStringCopy'
/oracledata/product/11.2.0/dbhome_3/ctx/lib//libsc_fa.so: undefined reference to `SCCExceptionTrap::~SCCExceptionTrap()'
/oracledata/product/11.2.0/dbhome_3/ctx/lib//libsc_fa.so: undefined reference to `SNCompareTimes'
/oracledata/product/11.2.0/dbhome_3/ctx/lib/libsc_ut.so: undefined reference to `Win32VInitBail
INFO: Out'
/oracledata/product/11.2.0/dbhome_3/ctx/lib/libsc_ut.so: undefined reference to `SPSubstringReplace'
/oracledata/product/11.2.0/dbhome_3/ctx/lib//libsc_fa.so: undefined reference to `SNFindClose'
/oracledata/product/11.2.0/dbhome_3/ctx/lib//libsc_fa.so: undefined reference to `SNEnterCriticalSection'
/oracledata/product/11.2.0/dbhome_3/ctx/lib//libsc_fa.so: undefined reference to `SNFreeLibrary'
/oracledata/product/11.2.0/dbhome_3/ctx/lib/libsc_ut.so: undefined reference to `Win32VOnAssertionFailure'
INFO: oracledata/product/11.2.0/dbhome_3/ctx/lib//libsc_fa.so: undefined reference to `SNLeaveCriticalSection'
/oracledata/product/11.2.0/dbhome_3/ctx/lib/libsc_ut.so: undefined reference to `SNGetLibrarySpec'
/oracledata/product/11.2.0/dbhome_3/ctx/lib//libsc_fa.so: undefined reference to `SCCExceptionTrap::SCCExceptionTrap(int, char const*, int)'
/oracledata/product/11.2.0/dbhome_3/ctx/lib/libsc_ut.so: undefined reference to `Win32VDebugString'
/oracledata/product/11.2.0/dbhome_3/ctx/lib//libsc_fa.so: undefined
INFO: reference to `SNFindFirstFile'
/oracledata/product/11.2.0/dbhome_3/ctx/lib/libsc_ut.so: undefined reference to `SNSetCriticalSectionFactoryType'
/oracledata/product/11.2.0/dbhome_3/ctx/lib/libsc_ut.so: undefined reference to `Win32VGetOutputSolutionByType'
/oracledata/product/11.2.0/dbhome_3/ctx/lib/libsc_ut.so: undefined reference to `Win32VSetDefaultOutputSolutionForType'
/oracledata/product/11.2.0/dbhome_3/ctx/lib/libsc_ut.so: undefined reference to `Win32VSetHandleUserData'
/oracledata/product/11.2.0/d
INFO: bhome_3/ctx/lib/libsc_ut.so: undefined reference to `Win32VPopBailOut'
/oracledata/product/11.2.0/dbhome_3/ctx/lib//libsc_fa.so: undefined reference to `SPBytesToString'
/oracledata/product/11.2.0/dbhome_3/ctx/lib//libsc_fa.so: undefined reference to `SNFindNextFile'
collect2: ld a retourné 1 code d'état d'exécution
INFO: make: *** [ctxhx] Erreur 1
INFO: Arrêter la sortie à partir du processus généré dynamiquement.
List of my RPM
rpm -qa --qf '%{name}-%{version}-%{release}.%{arch}\n'|egrep 'compat|glibc|libstc|gcc'|sort
avahi-compat-libdns_sd-0.6.16-9.el5_5.x86_64
compat-dapl-2.0.25-2.el5_5.1.i386
compat-dapl-2.0.25-2.el5_5.1.x86_64
compat-dapl-devel-2.0.25-2.el5_5.1.i386
compat-dapl-devel-2.0.25-2.el5_5.1.x86_64
compat-dapl-utils-2.0.25-2.el5_5.1.x86_64
compat-db-4.2.52-5.1.x86_64
compat-gcc-34-3.4.6-4.1.x86_64
compat-gcc-34-c++-3.4.6-4.1.x86_64
compat-libgcc-296-2.96-138.i386
compat-libstdc++-296-2.96-138.i386
compat-libstdc++-33-3.2.3-61.i386
compat-libstdc++-33-3.2.3-61.x86_64
gcc-4.1.2-50.el5.x86_64
gcc-c++-4.1.2-50.el5.x86_64
gcc-gfortran-4.1.2-50.el5.x86_64
gcc-java-4.1.2-50.el5.x86_64
glibc-2.5-58.i686
glibc-2.5-58.x86_64
glibc-common-2.5-58.x86_64
glibc-devel-2.5-58.i386
glibc-devel-2.5-58.x86_64
glibc-headers-2.5-58.x86_64
java-1.4.2-gcj-compat-1.4.2.0-40jpp.115.x86_64
java-1.4.2-gcj-compat-devel-1.4.2.0-40jpp.115.i386
java-1.4.2-gcj-compat-devel-1.4.2.0-40jpp.115.x86_64
java-1.4.2-gcj-compat-src-1.4.2.0-40jpp.115.x86_64
libgcc-4.1.2-50.el5.i386
libgcc-4.1.2-50.el5.x86_64
My .bash_profile file
# .bash_profile
# Get the aliases and functions
if [ -f ~/.bashrc ]; then
. ~/.bashrc
fi
# User specific environment and startup programs
PATH=$PATH:$HOME/bin
export PATH
# Oracle Settings
TMP=/tmp; export TMP
TMPDIR=$TMP; export TMPDIR
ORACLE_HOSTNAME=rhel56.bonifay.san; export ORACLE_HOSTNAME
ORACLE_UNQNAME=SID1; export ORACLE_UNQNAME
ORACLE_BASE=/oracledata; export ORACLE_BASE
ORACLE_HOME=/oraclebin/product/11.2.0/db_1; export ORACLE_HOME
ORACLE_SID=SID1; export ORACLE_SID
PATH=/usr/sbin:$PATH; export PATH
PATH=$ORACLE_HOME/bin:$PATH; export PATH
LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib; export LD_LIBRARY_PATH
CLASSPATH=$ORACLE_HOME/jlib:$ORACLE_HOME/rdbms/jlib; export CLASSPATH

thanks Dude.
But same result with /u01 and $PATH
For info my variables environnement, if you have a idea
HOSTNAME=OEL55.bonifay.sa
SHELL=/bin/bash
TERM=xterm
HISTSIZE=1000
ORACLE_UNQNAME=SID1
TMPDIR=/tmp
USER=oracle
LD_LIBRARY_PATH=/u01/product/11.2.0/db_1/lib:/lib:/lib64:/usr/lib:/usr/lib64
LS_COLORS=no=00:fi=00:di=00;34:ln=00;36:pi=40;33:so=00;35:bd=40;33;01:cd=40;33;01:or=01;05;37;41:mi=01;05;37;41:ex=00;32:*.cmd=00;32:*.exe=00;32:*.com=00;32:*.btm=00;32:*.bat=00;32:*.sh=00;32:*.csh=00;32:*.tar=00;31:*.tgz=00;31:*.arj=00;31:*.taz=00;31:*.lzh=00;31:*.zip=00;31:*.z=00;31:*.Z=00;31:*.gz=00;31:*.bz2=00;31:*.bz=00;31:*.tz=00;31:*.rpm=00;31:*.cpio=00;31:*.jpg=00;35:*.gif=00;35:*.bmp=00;35:*.xbm=00;35:*.xpm=00;35:*.png=00;35:*.tif=00;35:
ORACLE_SID=SID1
ORACLE_BASE=/u01
ORACLE_HOSTNAME=OEL55.bonifay.sa
MAIL=/var/spool/mail/oracle
PATH=/u01/product/11.2.0/db_1/bin:/usr/sbin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/home/oracle/bin
INPUTRC=/etc/inputrc
PWD=/home/oracle
LANG=fr_FR.UTF-8
SSH_ASKPASS=/usr/libexec/openssh/gnome-ssh-askpass
SHLVL=1
HOME=/home/oracle
TMP=/tmp
LOGNAME=oracle
CVS_RSH=ssh
CLASSPATH=/u01/product/11.2.0/db_1/jlib:/u01/product/11.2.0/db_1/rdbms/jlib
LESSOPEN=|/usr/bin/lesspipe.sh %s
ORACLE_HOME=/u01/product/11.2.0/db_1
G_BROKEN_FILENAMES=1
_=/bin/env

Instillation Error Oracle Database 11gR2 SPARC

I am attempting to install Oracle Database 11gR2 on a Sun Blade2500 that is not connected to a network. I have followed the pre-instillation steps and when I attempt to run “runInstaller” I get the following error.
Exception in thread “main” java.lang.NoClassDefFoundError
     at java.lsng.Class.forName0 (Native Method)
     at java.lang.Class.forName (Class.java:164)
     at java.awt.Toolkit$2.run (Tllokit.java:821)
     at java.security.AccessCintroller.doPrivileged (Native Method)
     at java.awt.Toolkit.getDefaultToolkit (Toolkit.java:804)
     at com.jgoodies.looks.LookUtils.isLowResolution (Unknown Source)
     at com.jgoodies.looks.LookUtils. <clinit> (Unknown Source)
     at com.jgoodies.looks.plastic.PlasticLookAndFeel.<clinit> (PlasticLookAndFeel.jave:122)
     at java.lang.Class.forName0 (Native Method)
     at java.lang.Class.forName (Class.java:242)
     at javax.swing.SwingUtilities.loadSystemClass (SwingUtilities.java:1783)
     at javax.swing.UIManager.setLookAndFeel (UIManager.java:480)
     at oracle.install.commons.util.Application.startup (Application.java:758)
     at oracle.install.commons.flow.FlowApplication.startup (FlowApplication.java:164)
     at oracle.install.commons.flow.FlowApplication.startup (FlowApplication.java:181)
     at oracle.install.commons.base.driver.common.Installet.startup (Installer.java:256)
     at oracle.install.ivw.db.driver.DBInstaller.startup (DBInstaller.jave:114)
     at oracle.install.ivw.db.driver.DBInstaller.main (DBInstaller.java:132)

I have tied reverting the shell limits back to the default with no change in the results.
However I am having some trouble with the projmod command, my projid for the oracle user is “default” not “group.dba” and when I set the system parameters the #cat /etc/project returns the following:
system:0::::
user.root:1::::
noproject:2::::
default:3::::project.max-shm-memory=(priviledge,2147483648,deny)
group.staff:10::::
When I check the values they are all right except for the projid… do you think this will cause a problem?
Also I have attempted to edit my shell startup file as per setup documentation however I cannot open /usr/sh with a text editor am I trying to edit the wrong file? I searched for .profile and could only find setup.profile because of this I cannot set the unmask value to 022.
I am also having issues running xclock wail signed in as the oracle user I have the DISPLAY variable set properly and I can access xclock wail logged into the root user. The installer checks the monitor’s ability to run at the minimum 256 colors using xdpyinfo and returns an error saying that my DISPLAY variable may be set wrong… xdpyinfo runs fine wail logged onto the root user. I think fixing this problem may help a lot.

Error while installing Oracle Database Lite 10.2.0.1.1 for Win

Hello,
I am trying to install Oracle Database Lite 10.2.0.1.1 on Windows XP. I am going according screens on this page:
http://www.oraclebrains.com/2008/07/installing-oracle-database-lite-10g-release-3-mobile-server/
But at Step:12 - Mobile Server repository Wizzard after password enter I get error --- Io exception: The Network Adapter could not establish the connection. May I insert specific password for Username SYSTEM? Or where is problem?
Thanks for hint
David

Hi,
I have the same problem but, how can i know what my SID is ? i am trying with "ORCL" and it doesnt work.
Do you know in which file i can get it ? in the documentation of the installation i found this:
"If you are not sure of the values to enter for the URL, then you can query the data dictionary to obtain these values.
Connect as SYSTEM and run the following queries.
To retrieve the SID, execute: select instance_name from v$instance;
If you need to retrieve the port number, check the listener.ora file on the
back-end database."
But how can i query the database if i have not finished to install it yet and where is located the listener.ora file ?
I hope you can help me.
Thank you.

Hyperion errors after installing Oracle Database 11G

Hello,
The company I work for has a bunch of Oracle databases available, two which I connect to (use to connect to). I have multiple applications that I use to connect to these databases, Hyperion Interactive Reporting Studio 9.3.1 being one of them. I'm using Windows XP as my client.
I made the mistake of installing Oracle Database 11G Express Edition and now I cannot connect to any of the database using my applications, but I can connect to the same databases using SQL Developer. When I try connectiing using Hyperion, I get "SQL NATIVE ERROR [12504] SQL MESSAGE [[INTERSOLV][ODBC ORACLE 8 DRIVER][ORACLE 8][ORA-12504; TNS LISTERNER WAS NOT GIVEN THE SERVICE_NAME IN CONNECT DATA".
When connectiing using other company applications, which use the same database, i get "IM006: [INTERSOLV][ODBC ORACLE 8 DRIVER] DRIVERS SQLSETCONNECTATTRFAILED. UNABLE TO CONNECT TO DATABASE. CHECK USER NAME AND PASSWORD AND TRY AGAIN"
I'm assuming that I updated a driver or registry setting and I need to know how to reverse . I also copied a tnsnames and listerner from an associates computer and placed it in the same location on my computer, but this has not helped at all, even after rebooting the computer.
I even double checked and logged onto anothe computer and I can connect to the database using these same applications, so I definetly messed something up locally on my computer.
Any help is appreciated. Joe.

Probably you could solve odbc driver issues by removing the PATH entry from XE installation.
It looks something like:
Path=C:\oracle\oraclexe\app\oracle\product\11.2.0\server\bin;<remaining paths>
In system variabels settings, edit PATH to remove the "oraclexe" path and semicolon, leaving only <remaining paths>.
However, removing it will likely have an affect on XE usage. But that may be preferred over other apps working.
Edited by: orafad on Oct 12, 2011 2:55 PM

Can not Install Oracle Database 11g Release 2

This will be my second time trying to install Oracle Database 11g Release 2 on my Computer. I have Windows 7 x64 and when go through the setup phase, I receive numerous errors stating that files are missing and it will never get past that stage. I downloaded both folders for the database:
Oracle Database 11g Release 2 (11.2.0.1.0) for Microsoft Windows (x64)
win64_11gR2_database_1of2.zip (1,213,501,989 bytes) (cksum - 3906682109)
win64_11gR2_database_2of2.zip (1,007,988,954 bytes) (cksum - 1232608515)
Can anyone tell me what I am doing wrong?

Pl post the complete error message. Have you unzipped the two files into the same directory ?
Oracle 11g R2 Windows Installation issue
Re: 11g R2 install failure
Srini

How to install oracle database 11g express edition on Windows 7

Hi Guys,
i am trying to download and install Oracle database 11g express edition on windows7 and i can't seem to get it right. i did get the download but when i try to install, it keeps saying it appears to be an invalid archive.
Please help..

Action - Refer to the logs or contact OracleFinding the problem is the key. "Refer to the logs" is the only option, XE has no oracle support offerings.
Which plugin failed, and why did it fail will be important clues. There should be error messages in the log that will be helpful.
Otherwise, we don't have much help to offer. Fixing a problem means identifying the problem and performing steps to correct it, if there a fix is available.
A MOS lookup on the ins-20802 error has snippets from one installer session, this one is from an x64 install. Not x86. To paraphrase the details:
... Created a new file <drive>:<OH path>\cfgtoollogs\configToolAllCommands
SEVERE: java.io.IOException: Access is denied
...So from those symptoms, the user trying to run the installer does not have appropriate rights on that drive and/or folder. The fix for that particular problem is adding the user to the local administrators group. And rerunning the install. After running the deinstall steps to clean up the installation. As specified in the XE install guide for Windows.
http://docs.oracle.com/cd/E17781_01/install.112/e18803/toc.htm
Also note the System Requirements, it specifies a System architecture Intel x86, which is not X64. There is no X64 installer for XE on Windows. So it might work. Or it might not if your host is x64.
So if that is your particular error, verify that your user is in the local admins group. Either use the local users and groups applet (Start/Run/lusrmgr.msc) and open up the Administrators group. Click the Add button. Find your user. If your OS user is a windows domain user, be sure you have authenticated to the domain.
Try the `net ...` list of the adminis group, that should reveal whom is indeed in the local administrators group:
net localgroup administrators
Administrator
<domain>\Domain Admins ... # ??? is the host in windows domain ???
<domain>\Local Admins
<domain>\<user1>
<user2>
<user3>
echo %USERNAME%
# if relevant:
echo %USERDOMAIN%Like it also states in the Windows install guide, under Permission Required quote:
... must be a member of the Administrators group on Windows to install Oracle Database XE.

SAPINST failed step "Install Oracle Database (post processing)"

i will install ep6.0 with oracle database 9.2.0.4 on sun solaris.
the SAPINST failed at the step "Install Oracle Database (post processing) with follow error.
the oui - installer (runinstaller) finished sucessfully.
ERROR 2004-08-31 16:05:17
CJS-00084 SQL statement or script failed. DIAGNOSIS: Error message: ORA-01501: CREATE DATABASE failedORA-01101: database being created currently mounted by some other instance
Disconnected from Oracle9i Enterprise Edition Release 9.2.0.4.0 - 64bit Production
With the Partitioning optionJServer Release 9.2.0.4.0 - Production. SOLUTION: See ora_sql_results.log and the Oracle documentation for details.
no user is logged on the Database. Database is not running (is shutdowned and unmounted). No Oracle process is running.
pleas help.
thanks
armin hadersbeck

Hi Armin,
We're going to install EP 6 stack3 with Oracle 9.2.0.4 and Solaris 9. We have exactly the same error as you during sapinst.
How do you solved that ?
Thanks a lot for your help,
Regards from Mexico,
Diego

Installing Oracle Database Express Edition 11g on UBUNTU

Hello everyone,
I want to install Oracle Database Express Edition 11g on UBUNTU. I followed the steps from this link created by Dude:
https://forums.oracle.com/thread/2303639?start=0&tstart=0
My problem becomes when I type in from the terminal:
sudo /etc/init.d/oracle-xe configure
I followed the instructions there, agreeing t HTTP port 8080, port database listener 1521, specifying a password for my database account, and wanting Oracle Express to be started on boot. This is what I'm getting:
Starting Oracle Net Listener...touch: cannot touch `/var/lock/subsys/listener': No such file or directory
Done
Configuring database...
Database Configuration failed. Look into /u01/app/oracle/product/11.2.0/xe/config/log for details
I have no idea what this means, so I went into the log's location and I found 4 of them, so I clicked on each of them, and this is what I'm getting:
1. cloneDBCreation.log:
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
ORA-00845: MEMORY_TARGET not supported on this system
Create controlfile reuse set database "XE"
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
alter system enable restricted session
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
alter database "XE" open resetlogs
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
alter database rename global_name to "XE"
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
alter system switch logfile
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
alter system checkpoint
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
2. CloneRmanRestore.log
ORA-00845: MEMORY_TARGET not supported on this system
select TO_CHAR(systimestamp,'YYYYMMDD HH:MI:SS') from dual
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
declare
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
select TO_CHAR(systimestamp,'YYYYMMDD HH:MI:SS') from dual
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
3. postDBCreation.log
begin
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
File created.
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
ORA-00845: MEMORY_TARGET not supported on this system
select 'utl_recomp_begin: ' || to_char(sysdate, 'HH:MI:SS') from dual
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
BEGIN utl_recomp.recomp_serial(); END;
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
select 'utl_recomp_end: ' || to_char(sysdate, 'HH:MI:SS') from dual
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
4. postScripts.log
CREATE OR REPLACE LIBRARY dbms_sumadv_lib AS '/u01/app/oracle/product/11.2.0/xe/lib/libqsmashr.so';
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
BEGIN dbms_datapump_utl.replace_default_dir; END;
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
commit
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
create or replace directory XMLDIR as '/u01/app/oracle/product/11.2.0/xe/rdbms/xml'
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
DROP DIRECTORY ORACLE_OCM_CONFIG_DIR
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
DROP DIRECTORY ADMIN_DIR
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
DROP DIRECTORY WORK_DIR
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
BEGIN dbms_swrf_internal.cleanup_database(cleanup_local => FALSE); END;
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
commit
Can somebody that knows this, or has installed Oracle Express on Ubuntu, to please explain it to me what does it mean and why am I getting those errors. Please explain thoroughly as if I am an amateur person, IN DETAIL, STEP-BY-STEP. I want to run it and make it work! I heard that it encourages people to answer for points. I am open for your suggestions and experiences, as long as it's not 'use common sense', 'you're dumb', or an answer that is vaguely explained. Thank you for those that take the time to read it.
ec557fac-f825-4356-a220-1ec941ce7cd0

Hi Pradeepcmst,
Thanks for your suggestion, but I found it sometimes misunderstanding on what he's trying to say - his instructions are not step-by-step and precise. Instead, I found this link that helped me a lot:
Installing Oracle 11gXE on Mint and Ubuntu | The Anti-Kyte

The problem of installing oracle database 9.2.0 on Redhat 7.2

Hi, there,
I meet an error when I want to run runInstaller to install oracle database 9.2.0 on Redhat 7.2 at the Oracle Database Configuration Assistant step:
ORA-03113:end-of-file on communication channel.
the installer report every other things are installed successfully except Database Configuration Assistant. but after I try to connect to database using sqlplus:
sqlplus /nolog
connect / as sysdba
after a very long responding time, there is an interior error. I don't know how to fix it. do I need reinstall the oracle or mannully configure the database? how to do that? my machine is P2 266 with 128M memory. the harddisk is 30GB. I don't know if this problem is caused by memory limitation?
besides, who knows any other forums or website about oracle database installed on linux? I found there is very limit resource about this content on oarcle website.
any hint will be great appreciated!

It could be because of the memory. Oracle 9.x requires 512 MB minimum on Linux. Also the only Red Hat Oracle is now supporting is Advanced Server. But there are workarounds.
There is an excellent web site for installing Oracle on Linux, but it has been down for the last week or two. But try it maybe next week:
www.puschitz.com

Solaris 10 patches for Oracle Database 11gR2

Hi,
I downloaded Oracle Solaris 10 s/w from e-Delivery and got it installed. For Oracle Database 11gR2 I also need the followging patches:
120754-06: SunOS 5.10_x86 libmtsk
119961-05: SunOS 5.10_x86: Assembler
119964-14: SunOS 5.10_x86 Shared library patch for C++_x86
Though we have access to MyOracleSupport we can only download s/w patches using our support contract with Oracle and not OS patches.
Is there any other way I can get these patches.
Rgds,
Thiru.

Thiru,
You won't find the patches in the patches/ directory on the DVD or the ISO image. Oracle integrates the patches directly into the packages, so there is no need to provide or install them separately.
All patches have a patch number (e.g. 120754) and a revision (e.g. 06). A newer revision of a patch always contains all fixes of the previous revisions. So try to run "showrev -p | grep 120754" instead, and you'll see that patch 120754-08 is pre-installed. As revision 08 is newer/higher than 06, the patch requirement is satisfied.
Hope that helps,
mp.

Problem in installing oracle database 11g express edition

while installing oracle database 11g express edition during product specific prerequisite check, checking for oracle XE service instance is failed, what to do ?

Hello, and welcome to the OTN forums,
the prerequisites are documented quite well. I'm not sure about the actual error message, but from what you write it sounds like you already have another Oracle XE install on your machine, possible the Oracle 10g XE. As mentioned in the Installation Guide, you may have only one instance per server, so the installer fails.
If that's not the reason, can you please post the exact error message you receive?
-Udo

Error installing Oracle Database 11gR2

Similar Messages

Maybe you are looking for