Error installing patch 9654983 on HPUX RAC 11.2

Hello,
I'm doing a new installation of a *11.2.0.1 GRID* on a HPUX Itanium 11.31 but having the following error when aplying patch 9654983:
Running make for target client_sharedlib
Make failed to invoke "/usr/ccs/bin/make -f *ins_net_client.mk* client_sharedlib ORACLE_HOME=/u01/app/oracle/product/crs"....'rm: /u01/app/oracle/product/crs/lib/libclntsh.so.11.1 not removed. Permission denied
genclntsh: Failed to remove /u01/app/oracle/product/crs/lib/libclntsh.so.11.1
and then again
Make failed to invoke "/usr/ccs/bin/make -f *ins_rdbms.mk* client_sharedlib ORACLE_HOME=/u01/app/oracle/product/crs"....'rm: /u01/app/oracle/product/crs/lib/libclntsh.so.11.1 not removed. Permission denied
genclntsh: Failed to remove /u01/app/oracle/product/crs/lib/libclntsh.so.11.1
at the end I get the following errors:
Re-link fails on target "client_sharedlib".
Re-link fails on target "client_sharedlib".
Can someone help me out?

Hi,
Are you sure that services this ORACLE_HOME were down.
In RAC environment, choose one of the patch installation methods provided by OPatch (rolling, all node, or minimum downtime), and shutdown instances and listeners as appropriate for the installation method selected.
This PSU patch is rolling RAC installable.
genclntsh: Failed to remove /u01/app/oracle/product/crs/lib/libclntsh.so.11.1This usually happens when you try to remove a lib that is still loaded in memory.
On AIX sometimes the libs are stuck in memory (after kill process), and I use the command slibclean to clear the references lib invalidated. But in HP UX I do not know if you have this command or similar.
Regards,
Levi Pereira
Please close your thread when you get the solution to your problem. 
Mark the replies answered "helpful" answer or "correct" answer that will help others with same problem. 
Thanks for doing your part to make this community as valuable as possible for everyone!

Similar Messages

Installing Patch 9654983 help needed

Hi I am trying to install patch 9654983.
the read me says to take the following steps:
unzip p9654983_11201_<platform>.zip
cd 9654983
opatch apply
however ... when i try and run the command opatch apply, i get the following error:
[matt@localhost 9654983]$ opatch apply
bash: opatch: command not found
Any ideas??

Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
Sorry im really new to both oracle and linux ... the following are the pre-installation instructions:
2.3.1.1 Environments with ASM
If you are installing the PSU to an environment that has Automatic Storage Management (ASM), note the following:
For Linux x86 and Linux x86-64 platforms, install either (A) the bug fix for 8898852 and the Database PSU patch 9654983, or (B) the Grid Infrastructure PSU patch 9343627.
For all other platforms, no action is required. The fix for 8898852 was included in the base 11.2.0.1.0 release.
2.3.1.2 Environment Checks
1.
Ensure that the $PATH definition has the following executables: make, ar, ld, and nm.
The location of these executables depends on your operating system. On many operating systems, they are located in /usr/ccs/bin, in which case you can set your PATH definition as follows:
export PATH=$PATH:/usr/ccs/bin
2.3.1.3 One-off Patch Conflict Detection and Resolution
For an introduction to the PSU one-off patch concepts, see "Patch Set Updates Patch Conflict Resolution" in My Oracle Support Note 854428.1 Patch Set Updates for Oracle Products.
The fastest and easiest way to determine whether you have one-off patches in the Oracle home that conflict with the PSU, and to get the necessary conflict resolution patches, is to use the Patch Recommendations and Patch Plans features on the Patches & Updates tab in My Oracle Support. These features work in conjunction with the My Oracle Support Configuration Manager. Recorded training sessions on these features can be found in Note 603505.1.
However, if you are not using My Oracle Support Patch Plans, follow these steps:
1.
Determine whether any currently installed one-off patches conflict with the PSU patch as follows:
unzip p9654983_11201_<platform>.zip
opatch prereq CheckConflictAgainstOHWithDetail -phBaseDir ./9654983
2.
The report will indicate the patches that conflict with PSU 9654983 and the patches for which PSU 9654983 is a superset.
Note that Oracle proactively provides PSU 11.2.0.1.2 one-off patches for common conflicts.
3.
Use My Oracle Support Note 1061295.1 Patch Set Updates - One-off Patch Conflict Resolution to determine, for each conflicting patch, whether a conflict resolution patch is already available, and if you need to request a new conflict resolution patch or if the conflict may be ignored.
4.
When all the one-off patches that you have requested are available at My Oracle Support, proceed with Section 2.3.2, "Patch Installation Instructions".
1. im unaware if I have Automatic Storage Management (ASM),?
2. how do i check to Ensure that the $PATH definition has the following executables: make, ar, ld, and nm.
3. [matt@localhost 9654983]$ opatch prereq CheckConflictAgainstOHWithDetail -phBaseDir ./9654983
Invoking OPatch 11.1.0.6.6
Oracle Interim Patch Installer version 11.1.0.6.6
Copyright (c) 2009, Oracle Corporation. All rights reserved.
The argument "./9654983" does not exists.
PREREQ session
Argument(s) Error... Patch base location is not valid.
Please check the arguments and try again.
OPatch failed with error code 135
[matt@localhost 9654983]$

Error Installing patch 6272725 on Windows 2003 server

Hi all,
I am trying to install the RUP3 patch on Windows 2003 server. I am getting the following error when installing patch 6272715 which is required to be installed before installing patch 6141000. If i continue installing patch 6141000 after ignoring this error, i get same error during installation of patch 6141000. Please can any one suggest me what i should do to get rid this error.
AD utilities can support a maximum of 999 workers. Your
current database configuration supports a maximum of 83 workers.
Oracle recommends that you use between 2 and 4 workers.
Enter the number of parallel workers [2] :
AutoPatch will run in parallel mode.
Did not need to apply new applterr.txt.
Applying new applprod.txt (if any)...
Did not need to apply new applprod.txt.
Performing version checking for driver files...
Log and Info File sync point:
Mon Nov 26 2007 12:33:27
AutoPatch found some files which it will not apply.
These files are listed in the AutoPatch informational message file.
Copying driver files into installation area...
No driver files were selected for copying.
Skipping...
ForceCopy driver files into installation area for Specified driver
since no such action is present for this driver file
Screening out files not valid for this installation...
Determining valid on-site files...
Extracting object modules from product libraries...
setEnvAdrelink: Error: Cannot open registry key:
SOFTWARE\ORACLE
aiosp2() Error: failure in usdspn()
Contents of error buffer are:
"usdsop cannot create a new process
Cause: usdsop encountered an error creating a new process. [Reason].
Action: Check that your system had enough resources to start a new process. Cont
act your system administrator to obtain more resou (RE"
An error occurred while extracting files from library.
Continue as if it were successful [No] :
--- Thank You.

Sir,
I am posting the output as told by you.
G:\>which ls
ls: Command not found.
G:\>c:
C:\>ls
'ls' is not recognized as an internal or external command,
operable program or batch file.
C:\>cd e:\cygwin\bin
C:\>e:
E:\cygwin\bin>which ls
ls: Command not found.
E:\cygwin\bin>
I am also posting the output of adadmin utility in which i tried ti relink FND programs
Enter list of products to link ('all' for all products) [all] :
Generate specific executables for each selected product [No] ?
AD Administration can relink your Oracle Applications programs with debug
information. Oracle recommends that you do not relink your programs
with debug information unless asked to do so by Oracle Support Services.
Relink with debug information [No] ?
Relinking selected modules in Application Object Library.
setEnvAdrelink: Error: Cannot open registry key:
SOFTWARE\ORACLE
/cygdrive/g/ora12/VIS/apps/apps_st/appl/ad/12.0.0/bin/adrelinknew.sh: line 33: a
wk: command not found
/cygdrive/g/ora12/VIS/apps/apps_st/appl/ad/12.0.0/bin/adrelinknew.sh: line 203:
tr: command not found
/cygdrive/g/ora12/VIS/apps/apps_st/appl/ad/12.0.0/bin/adrelinknew.sh: line 534:
cat: command not found
/cygdrive/g/ora12/VIS/apps/apps_st/appl/ad/12.0.0/bin/adrelinknew.sh: line 538:
tr: command not found
/cygdrive/g/ora12/VIS/apps/apps_st/appl/ad/12.0.0/bin/adrelinknew.sh: line 538:
tr: command not found
/cygdrive/g/ora12/VIS/apps/apps_st/appl/ad/12.0.0/bin/adrelinknew.sh: line 538:
tr: command not found
/cygdrive/g/ora12/VIS/apps/apps_st/appl/ad/12.0.0/bin/adrelinknew.sh: line 548:
awk: command not found
/cygdrive/g/ora12/VIS/apps/apps_st/appl/ad/12.0.0/bin/adrelinknew.sh: line 573:
cat: command not found
/cygdrive/g/ora12/VIS/apps/apps_st/appl/ad/12.0.0/bin/adrelinknew.sh: line 575:
rm: command not found
Usage: adrelink force=y [<optional args>] <targets>
or: adrelink force=y [<optional args>] filelist=<file>
where <targets> = { <product module> [<product module>] ... }
and <product module> = "<product> <module name>"
- <product> should be in lower case
- <module name> should exactly match the executable name
Valid <optional args> are:
envfile=adsetenv.sh
Used only by the 'adsetup' script
link_debug=y
Will we link executables with debug or not? Default is 'n'
backup_mode=none
Which executables will we back up when linking with force=y?
Default is 'file'. Meanings are:
- none: do not back up any executables
- all : back up all executables
- file: do what $APPL_TOP/admin/adlinkbk.txt says to do
Type 'adrelink examples' to see some examples of running adrelink.
An error occurred while relinking application programs.
Continue as if it were successful [No] :
It is clear that there is some problem with Cygwin. I have renamed the following executabes after the cygwin installation.
gcc to cc
egrep to grep
gawk to awk
gnumake to make
i have also copied which.exe to "Windows\system32" directory from "cygwin\bin" folder and
Copy LINK.exe to "Windows\system32" directory from "VC98" directory.
Please tell me if there is something wrong with Cygwin installation.

Errors installing patch 9.2.0.5

Trying to install patch 9.2.0.5 on solaris 64-bit in silent mode using response files and receive the following error when trying to install the OUI supplied with the patch.
Error: <myexisting sid> already exists at <specified oracle_home location> specify another location for HOME1.
If I specify another location the oui is installed, but when I attempt to install the patch I get :
Error: Specified a non-empty directory to install this product. Recommended to specify either an empty or non-existent directory to install this product.
When I specify a empty directory, I get:
Alert: There are no patches that need to be applied.

Hi
What is the version number of the database for what you want to install the patch?
Have you selected the home of the database in the installer?
Ott Karesz
http://www.trendo-kft.hu

Error installing/patching 9.2.0.4 Opatch(10.1.0.2)

Hi
I have download the latest OPatch(10.1.0.2) to apply the patch
p3119415_9204_LINUX.zip on Oracle 9i, but when running opatch(opatch apply) I
am getting this error:
Can't call method "build_option_details" on an undefined value at
/ORA/app/oracle/product/817/OPatch/perl_modules/Apply.pm line 5257.
I have checked my perl version, and I think is correct:
This is perl, v5.8.0 built for i386-linux-thread-multi
(with 1 registered patch, see perl -V for more detail)
So I think the problem is not my perl version.
After checking the apply.pm file I see that is a problem(bug?) with a class
value
$$rh_detail{$command}{_options} =(THIS IS LINE 5257)
$this_class -> build_option_details ( {
rh_options => $$rh_detail{$command}{_options},
ra_option_list => \@options } );
I have two Oracle versions installed. I have 8.1.7(only software), and 9.2.0.4 where i want to install the BD.
I have apply the OPatch in ORACLE_HOME/optach(that is the 8.1.7). I also tried in th 9i ORACLE_HOME, but nothing
Any ideas where is the problem?
Thank You
JailBreak

Hi Eric
Thank you for your reply.
I have seen that note, but that is not my problem. The perl version is correct.
But i have resolve the problem.
I have two ORACLE_HOME(one 8.1.7 and a 9.2.0.4) and the opatch was to 9i, and my ORACLE_HOME and CLASSPATH environment was pointing to the 8.1.7
Thank you
JailBreak

Error installing Patch 9.2.0.4

Hello,
I am installing Oracle9i patch 9.2.0.4 on a 64-bit AIX 5L machine. It currently has Oracle DB 9.2.0.1 installed.
My problem is that the installer quits with a file-not-found exception close to the end of the installation. The installation log shows that it happens right after "starting install phase 2 of component Oracle Net Required Support Files Patch" and the exception is:
Exception thrown from action: copyGroupFromJar
Exception Name: FileNotFoundException_name
Exception String: File not found /usr/share/scratch24/work/Disk1/stage/Patches/oracle.rsf.net_rsf/9.2.0.4.0/1/DataFiles/eelib.1.1.jar
Exception Severity: 2
Actually the file was there right before this command. Somehow it was deleted just before the installer tried to copy it and caused this exception.
Can someone provide input on what could have caused this error and how to fix it?
Thanks for your help!

I just tried that but got another error:
C:\oracle_download\p3084634\olap92041\oneoffs\3084634>OPatch\opatch apply
Performing pre-patch installation checks.
It is safe to abort the patch process at this time.
Do you want to continue and apply the patch?
Please respond Y|N > Y
Backing-up files before patching.
Applying patch 3084634.
Replacing oracle.exe.
OPatch\opatch.pl version: 1.0.0.0.24
Copyright (c) 2001,2002 Oracle Corporation. All Rights Reserved.
Please re-run this patch script after the problems have been resolved.
The following files had problems with being patched:
1. c:\oracle\ora92\bin
[ Couldn't copy c:\oracle_download\p3084634\olap92041\oneoffs\3084634\files\bin\oracle.exe into place. ]

Errors installing patch 111858-01.

I ran 111858-01 patch install, however, keep getting the following
error:
/var/sadm/patch/111858-01/log
This appears to be an attempt to install the same architecture and
version of a package which is already installed. This installation
will attempt to overwrite this package.
/opt/temp/itps20beta/imq2.0/SP1/111858-01/SUNWjqapi/install/checkinstall:
/opt/temp/itps20beta/imq2.0/SP1/111858-01/SUNWjqapi/install/checkinstall:
cannot open
pkgadd: ERROR: checkinstall script did not complete successfully
Dryrun complete.
No changes were made to the system.
I have verified (./jmqbroker -v) that the patch has not been installed.
How do I resolve this error?

Looks like the system thinks the patch is already installed.
Can you try uninstalling the patch and installing the patch again?
As root,
./backoutpatch 111858-01

I am using Acrobat XI Pro and tried to install the current update. I got this error message: "Error 1328.Error applying patch to file C:\Config.Msi\pT64b3.tmp It has probably been updated by other means1 and can no longer be modified by this patch. For mo

I am using Acrobat XI Pro and tried to install the current update. I got this error message: "Error 1328.Error applying patch to file C:\Config.Msi\pT64b3.tmp It has probably been updated by other means1 and can no longer be modified by this patch. For more information contact your patch vendor." tried uninstalling and reinstalling and still get the error. Searched for C:\Config.Msi\pT64b3.tmp and cannot find the path or the file

For AA XI, you only need the 11.0.09 patch. Download from http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows (Use "MAC" if a MAC is used).

Error in installing patch 9.0.1.4. "Exception in Thread "main"

Hi to all....
Want to ask a problem regarding installing patch Oracle database patch 9.0.1.4.
Previously, i got problems in installing other patch. The solution i got is to install the below patch.
They suggested that i have to install Patch 3038037.
and when I read the ReadMe of Patch 3038037, it stated
2 Preinstallation Requirements
The following list is the preinstallation requirements for this patch set:
Ensure that Oracle database patch 9.0.1.4 is applied to database instances
before applying the Oracle9iAS version 9.0.2.3 patch to infrastructure
instances.
So, in this case, i have to install "Oracle database patch 9.0.1.4" first
before i can install "Patch 3038037"
So, currently, i am trying to install the Oracle database patch 9.0.1.4...got error that are
1) Tried to run runInstaller in Disk1
./runInstaller: Command not found
2)The runInstaller in Disk1 actually will run runInstaller in folder "Disk1/install/solaris"..
but when i run it, it gaves me
"Exception in Thread "main" java.lang.NoClassDefFoundError:/ "
Have any ideas or experience?
Regards,
Rushdan.

try execute: export LD_ASSUME_KERNEL=2.4.1 before you run ./runInstaller
Btw try look at http://www.puschitz.com for installation guide.

Install patch 8333939, error occurs

Dear All,
My customer trying to apply patch 8333939, but error occurs.
Referred
Note 1224313.1: Getting Started with Oracle E-Business Suite Plug-in, Release 4.0 (Doc ID 1224313.1)
when running in the Section 5: Preparing Oracle Enterprise Manager 11g Grid Control
and installing patch 8333939, error occurs:
"the staging area needs oracle universal installer version 11.1.0.7.0 or late"
EBS version: 11.5.10.2
Platform: Linux x86-64
I have following questions:
1. Is this patch need to install on DB or APP?
2. Customer has two OUI home, does he need to upgrade OUI home to 11.1.0.7.0 or later? How? Is there a patch number or something?
[applprod3@ITEEBSTE oui]$ cat oraparam.ini |grep OUI_VERSION
OUI_VERSION=10.1.0.6.0
[applprod3@ITEEBSTE oui]$ pwd
/EBSTEST/PROD3/apps/tech_st/10.1.3/oui
[applprod3@ITEEBSTE oui]$ cat oraparam.ini |grep OUI_VERSION
OUI_VERSION=10.1.0.6.0
[applprod3@ITEEBSTE oui]$ pwd
/EBSTEST/PROD3/apps/tech_st/10.1.2/oui
Thanks,
Jackie

Hussein,
I have a question.
Is this means customer need to execute following steps first
3. Install Oracle Enterprise Manager 11g Grid Control (11.1.0.1.0)
3.1. Install OEM on the OMS server
3.2. Install OEM Agents on the Targets (where EBS is installed)
3.2.1. Targets having the same OS version as the OMS server
3.2.2. Targets having different OS versions as compared to the OMS server
Then, patch 8333939 can be applied successfully?
Because refer to
http://docs.oracle.com/cd/E17559_01/em.111/e18708/T506934T511454.htm
Section "Running Oracle Universal Installer"
It says:
Stop all the Management Services before installing the pack to a Management Service. Management Services will be restarted automatically after the pack has been installed.
Stop the OMS.
$PROMPT> $ORACLE_HOME/bin/emctl stop oms
Note: If your EM Repository (EM Database) is on the same machine, it must be left running. Only OMS and Agent services need to be taken down.
Set the environment variable ORACLE_HOME to ORACLE_HOME of Management Service 11.1.0.1 as shown here:
export ORACLE_HOME=/d1/oracle/em11g/oms11g
Then unzip this patch and install it. Am I right?
My customer's purpose is to install EM on R12, does
Note 1224313.1: Getting Started with Oracle E-Business Suite Plug-in, Release 4.0 (Doc ID 1224313.1)
is the correct note?
Thanks,
Jackie
Edited by: Jackie Han on Sep 3, 2012 8:28 PM

Correct way to install patch in Oracle RAC

Hello,
What is the correct way to install a patch in an two-node Oracle RAC 11g on Windows server 2008? Each node has its own ORACLE_HOME.
Do I have to shut down one Node before I patch the other Node?
Or both nodes can be up when installing patch? First do it on Node 1 and then on Node2?
Thank you

Typically you can do a rolling upgrade, patch one node, then the next node without bringing down the entire cluster, but as rui_catcuddler suggested, follow the Oracle instructions as closely as possible.
We have found several bugs with RAC 11gR2 on Windows 2008 R2, some minor, some critical. If this is your Oracle version and platform then try to get to the latest Oracle RAC release 11.2.0.3.
Regards,
Kevin

Cannot install update 9.0.3 in my Photoshop Elements 9. Getting error msg "Patch cannot be applied".

Cannot install update 9.0.3 in my Photoshop Elements 9. Getting error msg "Patch cannot be applied". How can I correct?

Nobody can know. You are not offering system info or otehr details. Start by uninstalling and reinstalling the base program.
Mylenium

Error installing OEM 12c patch, # /14807119

I am trying to install patch 14807119
Oracle Management Service 12c Release 2 (12.1.0.2.0)
Patch for Bug# 14807119
Platform: Generic
Released: Nov 14, 2012
This document describes how you can install the one-off patch for bug#
14807119 on your Oracle Mangement Service 12c Release 2 (12.1.0.2.0).
====================================================
Fails with this error message:
OUI-67073:UtilSession failed: Patch 13079372 requires component(s) that are not installed in OracleHome. These not-installed components are oracle.sysman.oms.core:12.1.0.2.0,
Any ideas? I could not find any info on the oracle.sysman.oms.core component.

-bash-3.2$ printenv | grep ORACLE_HOME
ORACLE_HOME=/opt/oracle/product/11.2.0/dbhome_1
Also, here is my environment info:
Oracle Enterprise Manager Cloud Control 12c Release 2
Copyright (c) 1996, 2012 Oracle Corporation. All rights reserved.
Agent Version : 12.1.0.2.0
OMS Version : 12.1.0.2.0
Protocol Version : 12.1.0.1.0
Thanks

OC4J error after installing patch 9.0.2.2

Hello, after installing patch 9.0.2.2 and trying to access the rwservlet I get this error
java.lang.UnsatisfiedLinkError: no rwu90 in java.library.path
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1349)
at java.lang.Runtime.loadLibrary0(Runtime.java:749)
at java.lang.System.loadLibrary(System.java:820)
at oracle.reports.util.Environment.<init>(Unknown Source)
at oracle.reports.server.RWServer.startServer(Unknown Source)
at oracle.reports.server.RWServer.run(Unknown Source)
at java.lang.Thread.run(Thread.java:484)
here is what my startinst.sh script looks like
/u01/app/oracle/product/9idev/jdk/bin/java -Dorg.omg.CORBA.ORBClass=com.inprise.vbroker.orb.ORB -Dorg.omg.CORBA.ORBSingletonClass=com.inprise.vbroker.orb.ORB -Doracle.security.jazn.config=/u01/app/oracle/product/9idev/j2ee/Oracle9iDS/config/jazn.xml -Doracle.home=/u01/app/oracle/product/9idev -DORACLE_HOME=/u01/app/oracle/product/9idev -jar /u01/app/oracle/product/9idev/j2ee/home/oc4j.jar -userThreads -config /u01/app/oracle/product/9idev/j2ee/Oracle9iDS/config/server.xml >/u01/app/oracle/product/9idev/j2ee/Oracle9iDS/log/stdout.log &
It was working fine on 9.0.2.0 I could run reports and forms off the web. I can access the HTTP OC4J server ok, just cant run any reports or forms. Please help. I changed no files after the patch.

correction, i can run the test web form, its the report servlet that doesnt work.

Error while running runcluvfy.sh(11g RAC on CentOS 5(RHEL 5))

Oracle Version: 11G
Operating System: Centos 5 (RHEL 5) : Linux centos51-rac-1 2.6.18-128.1.6.el5 #1 SMP Wed Apr 1 09:19:18 EDT 2009 i686 i686 i386 GNU/Linux
Question (including full error messages and setup scripts where applicable):
I am attempting to install oracle 11g in a RAC configuration with Centos 5 (redhat 5) as the operating system. I get the following error
ERROR : Cannot Identify the operating system. Ensure that the correct software is being executed for this operating system
Verification cannot complete
I get this error message when I run runcluvfy.sh, to verify the my configuration is clusterable. I don't know why.
I edited the /etc/redhat-release and entered echo "Red Hat Enterprise Linux AS release 4 (Nahant Update 7)" to attempt to fool the installer into thinking its red hat 4.
But still shows the same message.
Anyone knows how to fix this ?
Please help me.

http://www.idevelopment.info/data/Oracle/DBA_tips/Linux/LINUX_20.shtml
runcluvfy.sh will not work on centos because the cluster verification utility checks the operating system version using the redhat-release packag and centos do this with his packages, so you must install and use redhat-release package
Get rpm-build to be able to build rpm’s:
[root@centos5 ~]# yum install rpm-build
Get source rpm of redhat-release
[root@centos5 ~]# wget ftp://ftp.redhat.com/pub/redhat/linux/enterprise/5Server/en/os/SRPMS/redhat-release-5Server-5.1.0.2.src.rpm
Build package:
[root@centos5 ~]# rpmbuild –rebuild redhat-release-5Server-5.1.0.2.src.rpm
Install newly generated rpm:
[root@centos5 ~]# rpm -Uvh –force /usr/src/redhat/RPMS/i386/redhat-release-5Server-5.1.0.2.i386.rpm

Error installing patch 9654983 on HPUX RAC 11.2

Similar Messages

Maybe you are looking for