Error installing SAP Presentation Design 2011

I successfully installed Xcelsius Present 2008 trial version and then purchased a registered version of Presentation Design 2011. At the end of installation I received a message that said: "Missing installdir reg key for installiverse, required for uninstall. Key: SOFTWARE\SAP BusinessObjects\Suite XI 4.0\Installer\aurora Value: Path".
I ran the installation setup program as administrator. When that didn't work I logged on as administrator but got the same error message. Each time it installs a folderSAP BusinessObjects in my Program Files (x86) fikder, and I have to delete this folder in order to rerun the installation.
It makes no difference whether I do a Side-by-Side Installation or Perform Simple Upgrade.
I am running Windows Ultimate 64 bit and using Office 2007. I'd appreciate any help in resolving this issue.

Hi,
Dashboard Design and Presentation Design support the following software:
Microsoft Windows
u2022 Windows XP Professional SP2 and SP3
u2022 Windows Server 2003 Standard Edition SP1 and SP2
u2022 Windows Server 2003 Enterprise Edition SP1 and SP2
u2022 Windows Vista SP1 and SP2
u2022 Windows 7
For a current list of supported operating systems and hardware requirements, see the Dashboard
Design and Presentation Design Supported Platforms documentation available at
https://www.sdn.sap.com/irj/boc/articles.
Microsoft Excel
u2022 Excel XP SP3 (or later)
u2022 Excel 2003 SP1, SP2, and SP3
u2022 Excel 2007 SP1 and SP2
Adobe Flash
u2022 Flash Player with ActiveX 9.0 (or later)
11
@Sri

Similar Messages

  • Presentation Designer 2011 SP4 Setup Not Recognizing 32-Bit Microsoft Excel 2013

    I have 32-bit Microsoft Office Excel (with 2013 office suite) installed.  When I try to install the SAP Crystal Presentation Design 2011 software, the setup prerequisite check is stating that I am missing Microsoft Office Excel (XP or higher) 32-bit.
    How do I install Crystal Reports Presentation Designer without having to use Microsoft Excel 2003?
    Does anyone know when (estimated guess) Crystal Reports Presentation Designer is scheduled to fully support 2013?

    Hi,
    You have to use SAP Crystal Dashboard Design 2013 which does support MS Office 2013, but I've read that it is not great, so I would not recommend it and to use MS Office 2010 if you can.
    Regards,
    Josh

  • Problems with Excel xlsx files and Presentation Design 2011

    Hello,
    I just began using Presentation Design 2011 and have run into an issue and would really appreciate your help.
    I have very large files in Excel 2007 format (.xlsx) that I need to import into Presentation Design.  When I try to do so, it automatically opens the .xlsx file as a 97-2003 Excel file, and in hte process, I then lose a large portion of the data (the file is very large, and the space limitations in 97-2003 are not sufficient for all the data I have, so I receive a message about compatability indicating that the data goes beyond the space limit).
    I have tried looking online for a fix to this issue, and I cannot find it.  I just installed the service pack 2 patch 8 file, and this still does not work.
    Will someone please let me know what I need to download or do to be able to import the xlsx files and maintain them in that format? 
    Thank you!
    Curtis

    Hi Curtis,
    In the older version of dashboard design 2011, xcelsius 2008, .xlsx(excel 2007) files are imported and converted automatically to excel 2003 format. So there are some compatiability issues with both versions and also size limitations. excel 2003 cannot have more than 256 columns. I doubt same is the case with new version.
    Inside the designer data is in excel 2003 format. So you cannot have data more than the limit and some formats. You should only be pulling in enough data to fill your components in dashboard and remove any unnessary information from the spreadsheet . Since dashboards are meant for summary data, importing very large excels files are not recommended.
    Hope it helps you.
    Regards,
    Nikhil Joy

  • SAP Presentation Design (Xcelsius) Cursor Issue

    I am using the latest version of SAP Presentation Design (Version 14.1.1.1036).  This is the product formally known as Xcelsius.
    I am publishing a component heavy dashboard to PowerPoint.  When viewing the PPT slide and interacting with the dashboard, the cursor will often times disappear (it highlights items when I hover but you can't see the mouse at all no matter how much you move it around).  This issue is magnified whenever I connect my laptop to an external monitor while presenting to a large group.
    I have updated to the latest version of Flash and am running PowerPoint 2010.
    Without a cusor, my dashboard is dead in the water.
    Any ideas on how to fix this issue?

    Hi,
    Please check the below link.
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/4022239b-80f0-2c10-40aa-98173299a320?QuickLink=index&…
    Creating Support Messages - SAP Solution Manager - SAP Library
    how do we create OSS ticket
    http://www.sapkshare.com/user/image/step-by-step-guide-on-how-to-create-an-sap-oss-notes.pdf
    --SumanT

  • Error Installing SAP R/3 4.7 SR1 in AIX 6.1 with DB2 9.5

    Hello,
    AIX 6.1 SP5,  SAP R/3 4.7 SR1, DB2 9.5.
    I'm trying to install SAP R/3 4.7 SR1 and appears the error below during check / Adapt File System:
    TRACE      [iaxxbnodes.cpp:1083]
               CIaOsNodes::checkTheFreespace()
    Need 80000 KB on mountpoint /db2, got 2.62104e+08
    TRACE      [iaxxbnodes.cpp:1083]
               CIaOsNodes::checkTheFreespace()
    Need 300000 KB on mountpoint /sapmnt/PRD, got 7.33855e+06
    TRACE      [iaxxbnodes.cpp:1083]
               CIaOsNodes::checkTheFreespace()
    Need 100000 KB on mountpoint /usr, got 41736
    ERROR      2011-04-05 10:48:27 [iaxxbnodes.cpp:1089]
               CIaOsNodes::checkTheFreespace()
    MOS-01109  Needed space on mountpoint /usr is 100000 KB, but got only 41736 KB.
    TRACE      [iaxxbnodes.cpp:1083]
               CIaOsNodes::checkTheFreespace()
    Need 350000 KB on mountpoint /usr/sap/PRD, got 4.19363e+07
    INFO       2011-04-05 10:48:27 [iaxxbnodes.cpp:1102]
               CIaOsNodes::checkTheFreespace()
    Needed space in directory /db2/db2prd is 80000 KB.
    INFO       2011-04-05 10:48:27 [iaxxbnodes.cpp:1102]
               CIaOsNodes::checkTheFreespace()
    Needed space in directory /sapmnt/PRD/exe is 240000 KB.
    INFO       2011-04-05 10:48:27 [iaxxbnodes.cpp:1102]
               CIaOsNodes::checkTheFreespace()
    Needed space in directory /sapmnt/PRD/global is 50000 KB.
    INFO       2011-04-05 10:48:27 [iaxxbnodes.cpp:1102]
               CIaOsNodes::checkTheFreespace()
    Needed space in directory /sapmnt/PRD/profile is 10000 KB.
    INFO       2011-04-05 10:48:27 [iaxxbnodes.cpp:1102]
               CIaOsNodes::checkTheFreespace()
    Needed space in directory /usr/sap/PRD is 350000 KB.
    INFO       2011-04-05 10:48:27 [iaxxbnodes.cpp:1102]
               CIaOsNodes::checkTheFreespace()
    Needed space in directory /usr/sap/trans is 100000 KB.
    ERROR      2011-04-05 10:48:27 [iaxxbnodes.cpp:463]
               CIaOsNodes::checkFreespace()
    MOS-01105  Processing of one or more file system node operations of table
      Content of table: t_SAPComponent_Filesystem_Action_SHARED with condition WHERE WapsSystemName='PRD' AND WapsInstanceName='DVEBMGS00' AND WapsInstanceHost='b8saplab01' AND OpMode = 'CHECKFREESPACE'
      Row[0]    WapsSystemName="PRD" WapsInstanceName="DVEBMGS00" WapsInstanceHost="b8saplab01" Key="WAPS_transdir_freespace" Condition="true" NodeMountPointFreeSpace="100000" NodeName="/usr/sap/trans" OpMode="CHECKFREESPACE"
      Row[1]    WapsSystemName="PRD" WapsInstanceName="DVEBMGS00" WapsInstanceHost="b8saplab01" Key="WAPS_exedir_freespace" Condition="true" NodeMountPointFreeSpace="240000" NodeName="/sapmnt/PRD/exe" OpMode="CHECKFREESPACE"
      Row[2]    WapsSystemName="PRD" WapsInstanceName="DVEBMGS00" WapsInstanceHost="b8saplab01" Key="WAPS_sapmountglobal_freespace" Condition="true" NodeMountPointFreeSpace="50000" NodeName="/sapmnt/PRD/global" OpMode="CHECKFREESPACE"
      Row[3]    WapsSystemName="PRD" WapsInstanceName="DVEBMGS00" WapsInstanceHost="b8saplab01" Key="WAPS_sapmountprofile_freespace" Condition="true" NodeMountPointFreeSpace="10000" NodeName="/sapmnt/PRD/profile" OpMode="CHECKFREESPACE"
      Row[4]    WapsSystemName="PRD" WapsInstanceName="DVEBMGS00" WapsInstanceHost="b8saplab01" Key="WAPS_sapdir_sid_freespace" NodeMountPointFreeSpace="350000" NodeName="/usr/sap/PRD" OpMode="CHECKFREESPACE"
      Row[5]    WapsSystemName="PRD" WapsInstanceName="DVEBMGS00" WapsInstanceHost="b8saplab01" Key="DB6_insthome_unix_check_freespace" NodeMountPointFreeSpace="80000" NodeName="/db2/db2prd" OpMode="CHECKFREESPACE"
    My File System :
    Filesystem    MB blocks      Free %Used    Iused %Iused Mounted on
    /dev/hd4         288.00     90.34   69%    10255    29% /
    /dev/hd2        1984.00     40.76   98%    42811    63% /usr
    /dev/hd9var     1024.00    943.73    8%     3010     2% /var
    /dev/hd3        2048.00   2034.89    1%       46     1% /tmp
    /dev/hd1          32.00     29.73    8%       98     2% /home
    /dev/hd11admin    128.00    127.63    1%        5     1% /admin
    /proc                 -         -    -         -     -  /proc
    /dev/hd10opt    1472.00     95.56   94%     9909    30% /opt
    /dev/fslv00   256000.00 255960.49    1%       30     1% /db2
    /dev/fslv01     7168.00   7166.55    1%        7     1% /sapmnt/PRD
    /dev/fslv02    40960.00  40953.38    1%       21     1% /usr/sap/PRD
    /dev/fslv03    15360.00   4635.68   70%    11602     2% /instsapPRD
    /dev/fslv04    10240.00  10238.12    1%        4     1% /interfacePRD
    /dev/fslv05    20480.00   6564.55   68%       24     1% /MidiasUpgrade
    any idea ?

    > MOS-01109  Needed space on mountpoint /usr is 100000 KB, but got only 41736 KB.
    > /dev/hd2        1984.00     40.76   98%    42811    63% /usr
    The system says it needs 100 GB on /usr but you provide on 42.
    Markus

  • Cannot Install SAP Crystal Reports 2011 on 64-bit Win 7

    I am trying to install the 30-Day Trial of SAP Crystal reports 2011 on a Windows 7 64-bit pc and at the end of the installation, I receive the two errors below.
    I made sure I clicked 'Ran as Administrator' and under properties under the Compatibility Tab, I selected Windows 7.
    I also made sure my antivirus software was disabled.
    1st Error - It was a pop up after the installation said successful.
    Missing installdir reg key for installiverse, required for uninstall.  Key: SOFTWARE\SAP BusinessObjects\Suite XI 4.0\Installer\aurora Value: Path
    2nd Error - It was another pop up right after I selected OK on the 1st error pop up.
    Runtime Error!
    Program: C:\Users\Ken Muhr\Desktop\River Valley Recycling\Crystal Reports -...
    This application has requested the Runtime to terminate it in an unusual way.  Please contact the application's support team for more information.
    And the box name is called, "Microsoft Visual C++ Runtime Library
    After I click OK to clear this 2nd error pop up box, I go to my programs and it is not there to use.  I don't understand why.  Has anyone experienced this?
    Thanks in advance!

    Hello,
    Have a look in the install log file, it is under this tree:
    C:\Program Files (x86)\SAP BusinessObjects
    Anything in the install log? You can open it with notepad.
    Also have a look at this post: SAP Crystal Reports 2011: Error INS00140 and other install errors
    And you also need 2.0 Framework as well as MS VS 2005 C++ Security installed.
    Interesting name for a PC...
    Thanks
    Don
    Edited by: Don Williams on Aug 19, 2011 12:57 PM

  • Error Install : SAP NetWeaver 7.01 ABAP Trial Version

    Hi Everyone,
    I am getting this error while trying to install SAP Netweaver 7.01 ABAP Trial version.
    (Sep 27, 2008 3:01:11 PM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, An error occurred and product installation failed.  Look at the log file C:\sapdb\NSP\log.txt for details.
    (Sep 27, 2008 3:01:11 PM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile C:/Users/Amir/AppData/Local/Temp/MaxDBSAPNWPREV.log")
    STACK_TRACE: 22
    ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile C:/Users/Amir/AppData/Local/Temp/MaxDBSAPNWPREV.log")
    *     at com.sap.installshield.maxdb.maxdb_call_sdbinst.install(maxdb_call_sdbinst.java:193)*
    *     at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)*
    *     at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)*
    *     at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)*
    *     at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)*
    *     at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)*
    *     at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)*
    *     at com.installshield.product.service.product.PureJavaProductServiceImpl.installProduct(Unknown Source)*
    *     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)*
    *     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)*
    *     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)*
    *     at java.lang.reflect.Method.invoke(Unknown Source)*
    *     at com.installshield.wizard.service.LocalImplementorProxy.invoke(Unknown Source)*
    *     at com.installshield.wizard.service.AbstractService.invokeImpl(Unknown Source)*
    *     at com.installshield.product.service.product.GenericProductService.installProduct(Unknown Source)*
    *     at com.installshield.product.service.product.PureJavaProductServiceImpl.installAssembly(Unknown Source)*
    *     at com.installshield.product.service.product.PureJavaProductServiceImpl.access$900(Unknown Source)*
    *     at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)*
    *     at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)*
    *     at java.lang.Thread.run(Unknown Source)*
    Can somebody give me suggestion how to resolve my probelm.
    thanks,
    Amir
    PS : I have all the requirements system

    did u installed loopback adapter as mentioned in the installation instructions?
    Yes, yesterday, I tried to install SAP with loopback adapter (Now, I am trying to install without loopback adapter because I have a DHCP server) -> the same error with or without loopback adapter
    does your pc have internet connection available?
    Yes, I have an internet connection available (I am in Hotel and there is Internet via DHCP server)
    is the installation process completed?
    Yes the installation process is completed and with success (but without C:\sapdb)
    (Yesterday, when I had the first error and the installation process was not completed, I had the C:\sapdb.....strange)
    how much time the installation taking.. usually the step of database installation and configuration takes a long time.
    Not much time because there is not database installation
    while logon to sap, what details are u giving.. the system number .. is it 00,
    When I create the Item, I put the system number 00 but when I try to logon I have the error message that I posted in my previous message
    which other SAP softwares are installed on ur pc.
    In each time, when I tried to install SAP, I uninstalled all SAP software
    I hope you can help me for the install
    Note : I work on Vista sp1
    Thank you for your help
    Amir

  • Error installing SAP NW 7.01 ABAP trial version /Error 601-Need Expert Help

    Hi
    When I install the trial version, the installation aborts with error 601.
    I know this has been reported before, but I can't find a solution, tried removing all previous entries/components and re-installing a number of times but it always aborts.
    Details below, any help would be greatly appreciated:
    1, 2009 1:28:02 PM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, An error occurred and product installation failed.  Look at the log file C:\sapdb\NSP\log.txt for details.
    (Nov 11, 2009 1:28:02 PM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile C:/DOCUME1/SM/LOCALS1/Temp/MaxDBSAPNWPREV.log")
    STACK_TRACE: 22
    ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile C:/DOCUME1/SM/LOCALS1/Temp/MaxDBSAPNWPREV.log")
         at com.sap.installshield.maxdb.maxdb_call_sdbinst.install(maxdb_call_sdbinst.java:193)
         at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl.installProduct(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
         at java.lang.reflect.Method.invoke(Unknown Source)
         at com.installshield.wizard.service.LocalImplementorProxy.invoke(Unknown Source)
         at com.installshield.wizard.service.AbstractService.invokeImpl(Unknown Source)
         at com.installshield.product.service.product.GenericProductService.installProduct(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl.installAssembly(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl.access$900(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
         at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)

    I did these steps and was able to reinstall without any problems.
    1. Run registry clean tool that came with the packaged software
         \Additional_Tools\RegCleanTool
    2. Then run Uninstall - System/Standalone Engine/Optional Standadlon ......
         This is under the Software Life-Cycle Options-Uninstall
    3. Check if there are any files located in
         \Program Files\sapinst_instdir     -
         delete this directory
         \Documents and Settins\{user}\Local settings\Temp    -
       delete any references to SAP
    The above steps helped me to reinstall the Trial software. 
    Make sure that the system for the install meet the following requirements:
    u2022     Operating System: Windows XP Professional (Service Pack 2) or Windows Server 2003 or Windows Vista
    u2022     Hostname must not exceed 13 characters
    u2022     NTFS-File system
    u2022     Internet Explorer 5.5 or higher or Firefox 1.0 or higher
    u2022     At least 1 GB RAM (2-4 GB recommended)
    u2022     Pagefile size according to your RAM settings.
    u2022     Intel Pentium III/1.1 GHz or higher (or compatible)
    u2022     30 GB hard disk space temporary during installation - 24 GB permanent
            The actual hard disk space required is more than 32GB.  It is best to install the SAP directory on a separate drive if possible. Othewise you have to make sure that the drive where you install SAP has sufficient space for you system and the SAP install.
    u2022     High-resolution monitor (1024x768 or higher, 256 colors)
    u2022     Make sure that no other SAP system is installed on your computer
    u2022     The SAP system requires several ports for communication services. Therefore the file %WINDIR%\system32\drivers\etc\services must not include an entry for the ports 3200, 3600, 3900 and 8000. A possible entry can be excluded by using the hash symbol (#). (Note: The entry sapmsNSP 3600 for dialog instances may not exist, as it is set to 0 in Trial versions).
    u2022     If no DHCP server is available on your network (which dynamically determines the IP address) or your computer is not connected to any network, you need to install the virtual interface adapter MS Loopback Adapter.
    My system configuration:
    Virutal Machine
       Windows Server 2003
       1.7GB RAM
       20GB System Drive
       40GB Data drive (SAP installed here)
        MS Loopback Adapter with address 10.10.0.10 (entry in hosts file 10.10.0.10             localhost)
    Regards,
    Jasper

  • ERROR Installing SAP NetWeaver PI 7.1 EHP 1 on Windows Server 2008 R2 x64

    Hi!
    I'm trying to install SAP NWPI 7.1 on a Windows Server 2008 R2 Standard, but in the step "Create Java User" stop the process when this creating the SAPJSF user, here's my system specifications:
    OS: Windows Server 2008 R2 x64 Standard
    RAM: 2 GB
    Free Space: 100 GB
    Virtual Memory: 16384 MB
    Environment Variables:
    CPIC_MAX_CONV = 200
    JAVA_HOME = JDK 1.5 64 Bits
    On running phase: Create Java Users, the installation stops when try to create the SAPJSF user, here's the output log:
    ERROR      2010-06-16 12:18:28.968 [sixxcstepexecute.cpp:984]
    FCO-00011  The step createJSF with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Doublestack|ind|ind|ind|ind|6|0|createJSF was executed with status ERROR ( Last error reported by the step :. DIAGNOSIS: For more details see output of log file:).
    INFO 2010-06-16 12:17:57.968
    Output of C:\usr\sap\SPI\DVEBMGS00\exe\jstart.exe UserCheck.jstart -c ashost=CUNDISRV143 -c client=001 -c user=DDIC -c XXXXXX -a checkCreate -u SAPJSF -alias SAPJSF -p XXXXXX -r SAP_BC_JSF_COMMUNICATION -user_type system -message_file UserCheck.message is written to the logfile C:/Program Files/sapinst_instdir/NW71/INSTALL/SYSTEM/ADA/STD/AS/UserCheck.log.
    WARNING 2010-06-16 12:18:28.593
    Execution of the command "C:\usr\sap\SPI\DVEBMGS00\exe\jstart.exe UserCheck.jstart -c ashost=CUNDISRV143 -c client=001 -c user=DDIC -c XXXXXX -a checkCreate -u SAPJSF -alias SAPJSF -p XXXXXX -r SAP_BC_JSF_COMMUNICATION -user_type system -message_file UserCheck.message"; finished with return code 8. Output:
    INFO 2010-06-16 12:18:28.609
    Removed file C:\Program Files\sapinst_instdir\NW71\INSTALL\SYSTEM\ADA\STD\AS\dev_UserCheck.
    ERROR 2010-06-16 12:18:28.640
    CJS-30197  . DIAGNOSIS: For more details see output of log file:
    ERROR 2010-06-16 12:18:28.968
    FCO-00011  The step createJSF with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Doublestack|ind|ind|ind|ind|6|0|createJSF was executed with status ERROR ( Last error reported by the step :. DIAGNOSIS: For more details see output of log file:).
    WARNING 2010-06-16 12:18:29.125
    Could not get property IDs of the JavaScript object.
    ERROR 2010-06-16 12:18:29.125
    FJS-00010  Could not get value for property
    Best Regards,
    David

    Hi All,
      As per the latest available sapinst and the kernel DVS's the system does not come up in the Java stack/Dual stack. Fails at the stage Starting the Java stack/SAPJSF creation stage. This is due to the kernel issue as the latest kernel is not bundled as a part of the DVD.
    You are opt for 2 options
    1. Stop the installation and the Bring down the system via MMC/cmd. backup the kernel and upgrade the Kernel with the latest Kernel available in the market place and then start the SAPINST. This would go ahead fine and the system would come up.
    This is valid for the Dual stack and Java only system. In As ABAP the system get installed but the system would give dumps as soon as we log in so the Kernel upgrade needs to be done to proceed with the rest of the post steps.
    2. Follow the snote: Note 1480785 - Creating a Modified Windows Kernel DVD for not getting bothered with these errors while installations.
    Hope this helps -- Further more SAP would be coming out with the new DVD's/Support for Windows 2008 R2 pretty soon.
    Thanks,
    Lijin Xavier

  • Error Installing SAP Netweaver ABAP Trial version on windows XP

    Dear all, I was trying to install SAP NEtweaver 7.01 ABP trial version with MaxDB. DB installed fine but it failed later. Below is the error I am getting in the log file. I don't know what went wrong. I don't see it installed thus I can not uninstall and retry it.  I can try uninstalling MaxDB and then use registry cleaner tool and reinstall. I do have oracle and MySQL DB installed on the sam emachine. In the past also I have installed this ABP trial version with ( Oracle and MySQL for BOXI) and integrated it. Now I am not able to do it second time.
    Please advice.
    ================================================
    (Oct 20, 2010 11:13:18 PM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, An error occurred and product installation failed.  Look at the log file C:\SAP\NSP\log.txt for details.
    (Oct 20, 2010 11:13:18 PM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
    STACK_TRACE: 15
    ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
         at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.execute(StepWrapperInstallFiles.java:254)
         at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllSteps(StepWrapperInstallFiles.java:224)
         at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllInstallationSteps(StepWrapperInstallFiles.java:177)
         at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.install(StepWrapperInstallFiles.java:268)
         at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
         at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    (Oct 20, 2010 11:13:18 PM), Install, com.installshield.wizard.platform.win32.Win32PPKRegistryServiceImpl, err, java.lang.NullPointerException
    STACK_TRACE: 20
    java.lang.NullPointerException
         at com.installshield.product.service.registry.VPDDef.pack(Unknown Source)
         at com.installshield.product.service.registry.VPDDef.getId(Unknown Source)
         at com.installshield.product.service.registry.VPDDef.saveParents(Unknown Source)
         at com.installshield.product.service.registry.VPDDef.saveParents(Unknown Source)
         at com.installshield.product.service.registry.VPDDef.saveSoftwareObjectCache(Unknown Source)
         at com.installshield.product.service.registry.PureJavaRegistryServiceImpl.writeVPD(Unknown Source)
         at com.installshield.product.service.registry.PureJavaRegistryServiceImpl.finalizeRegistry(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
         at java.lang.reflect.Method.invoke(Unknown Source)
         at com.installshield.wizard.service.LocalImplementorProxy.invoke(Unknown Source)
         at com.installshield.wizard.service.AbstractService.invokeImpl(Unknown Source)
         at com.installshield.product.service.registry.GenericRegistryService.finalizeRegistry(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.finalizeRegistry(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
         at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    ===================================================

    Thanks Faisal, The problem is that I don't have window image CD or anything. I bought server online from rackspace and could install ABAP trial without any issue. Last time I tried to install on windows server 2003 from Amazon and it did not work. I think that was the latest version. I installed 7.01 version.
    Its working great though I have issue creating user in client 001.
    thanks,

  • Error Install SAP Netweaver ABAP Trial Version 7.01

    Hello everyone,
      I'm trying to install SAP Netweaver ABAP Trial Version 7.01.
      My operating system is Windows XP Professional.
      I have 3 GB of RAM and 80 GB of free space.
       Unfortunately, the installation process is stuck in:
       Phase 18 of 27
       Import Monitor jobs: running 3, waiting 20, completed 5, failed 0, total 28.
       In log files there is no error.
       However, after 3 hours the installation stops.
       Can anyone help please?
    Regards,
    Viviane

    Hi all,
    Unfortunately I don't have this directory after the error of installation.
    I have the following directories:
    C: \ usr \ sap \ NSP \ DVEBMGS00
    C: \ usr \ sap \ NSP \ SYS
    C: \ usr \ sap \ NSP \ tmp
    NSP = SID
    I looked for errors in the log files but not found. Below is the log file import_monitor.log
    INFO: 2010-03-16 21:05:31
    Import Monitor is started.
    CONFIG: 2010-03-16 21:05:31
    Application options:
    dbCodepage=4103
    dbType=ADA
    extFiles=no
    importDirs=C:\docs\SAPNWABAP701SR1_TRIAL\SAP_NetWeaver_701_SR1_Export\DATA_UNITS\EXP1;C:\docs\SAPNWABAP701SR1_TRIAL\SAP_NetWeaver_701_SR1_Export\DATA_UNITS\EXP2;C:\docs\SAPNWABAP701SR1_TRIAL\SAP_NetWeaver_701_SR1_Export\DATA_UNITS\EXP3
    installDir=C:\Program Files\sapinst_instdir\NW701\AS-ABAP\ADA\CENTRAL
    jobNum=3
    loadArgs=-nolog -c 50000
    monitorTimeout=30
    orderBy=
    r3loadExe=C:\usr\sap\NSP\SYS\exe\uc\NTI386\R3load.exe
    sapinst=
    trace=all
    tskFiles=yes
    CONFIG: 2010-03-16 21:05:31
    List of packages with table structure: 'SAP0000'.
    CONFIG: 2010-03-16 21:05:31
    List of packages with views: 'SAPVIEW'.
    TRACE: 2010-03-16 21:05:31 com.sap.inst.migmon.imp.ImportStandardTask preCreate
    Parse of 'C:\Program Files\sapinst_instdir\NW701\AS-ABAP\ADA\CENTRAL\DDLADA.TPL' template file is started.
    INFO: 2010-03-16 21:05:31 com.sap.inst.migmon.imp.ImportStandardTask preCreate
    Parse of 'C:\Program Files\sapinst_instdir\NW701\AS-ABAP\ADA\CENTRAL\DDLADA.TPL' template file is successfully completed.
    Primary key creation: before load.
    Index creation: after load.
    INFO: 2010-03-16 21:05:32
    Data codepage 4103 is determined using TOC file 'C:\docs\SAPNWABAP701SR1_TRIAL\SAP_NetWeaver_701_SR1_Export\DATA_UNITS\EXP1\DATA\ATAB.TOC' for package 'ATAB'.
    TRACE: 2010-03-16 21:05:32 com.sap.inst.migmon.LoadTask run
    Loading of 'REPOSRC' import package is started.
    TRACE: 2010-03-16 21:05:32 com.sap.inst.migmon.LoadTask processPackage
    Task file generation for 'REPOSRC' import package:
    C:\usr\sap\NSP\SYS\exe\uc\NTI386\R3load.exe -ctf I C:\docs\SAPNWABAP701SR1_TRIAL\SAP_NetWeaver_701_SR1_Export\DATA_UNITS\EXP1\DATA\REPOSRC.STR "C:\Program Files\sapinst_instdir\NW701\AS-ABAP\ADA\CENTRAL\DDLADA.TPL" REPOSRC.TSK ADA -l REPOSRC.log
    TRACE: 2010-03-16 21:05:32 com.sap.inst.migmon.LoadTask run
    Loading of 'DOKCLU' import package is started.
    TRACE: 2010-03-16 21:05:32 com.sap.inst.migmon.LoadTask processPackage
    Task file generation for 'DOKCLU' import package:
    C:\usr\sap\NSP\SYS\exe\uc\NTI386\R3load.exe -ctf I C:\docs\SAPNWABAP701SR1_TRIAL\SAP_NetWeaver_701_SR1_Export\DATA_UNITS\EXP1\DATA\DOKCLU.STR "C:\Program Files\sapinst_instdir\NW701\AS-ABAP\ADA\CENTRAL\DDLADA.TPL" DOKCLU.TSK ADA -l DOKCLU.log
    TRACE: 2010-03-16 21:05:32 com.sap.inst.migmon.LoadTask run
    Loading of 'SAPSSEXC_1' import package is started.
    TRACE: 2010-03-16 21:05:32 com.sap.inst.migmon.LoadTask processPackage
    Task file generation for 'SAPSSEXC_1' import package:
    C:\usr\sap\NSP\SYS\exe\uc\NTI386\R3load.exe -ctf I C:\docs\SAPNWABAP701SR1_TRIAL\SAP_NetWeaver_701_SR1_Export\DATA_UNITS\EXP1\DATA\SAPSSEXC_1.STR "C:\Program Files\sapinst_instdir\NW701\AS-ABAP\ADA\CENTRAL\DDLADA.TPL" SAPSSEXC_1.TSK ADA -l SAPSSEXC_1.log
    TRACE: 2010-03-16 21:05:32 com.sap.inst.migmon.LoadTask processPackage
    Loading of 'DOKCLU' import package into database:
    C:\usr\sap\NSP\SYS\exe\uc\NTI386\R3load.exe -i DOKCLU.cmd -dbcodepage 4103 -l DOKCLU.log -nolog -c 50000
    TRACE: 2010-03-16 21:05:32 com.sap.inst.migmon.LoadTask processPackage
    Loading of 'REPOSRC' import package into database:
    C:\usr\sap\NSP\SYS\exe\uc\NTI386\R3load.exe -i REPOSRC.cmd -dbcodepage 4103 -l REPOSRC.log -nolog -c 50000
    TRACE: 2010-03-16 21:05:32 com.sap.inst.migmon.LoadTask processPackage
    Loading of 'SAPSSEXC_1' import package into database:
    C:\usr\sap\NSP\SYS\exe\uc\NTI386\R3load.exe -i SAPSSEXC_1.cmd -dbcodepage 4103 -l SAPSSEXC_1.log -nolog -c 50000
    INFO: 2010-03-16 21:15:34 com.sap.inst.migmon.LoadTask run
    Loading of 'DOKCLU' import package is successfully completed.
    TRACE: 2010-03-16 21:16:02 com.sap.inst.migmon.LoadTask run
    Loading of 'SMIMCONT1' import package is started.
    TRACE: 2010-03-16 21:16:02 com.sap.inst.migmon.LoadTask processPackage
    Task file generation for 'SMIMCONT1' import package:
    C:\usr\sap\NSP\SYS\exe\uc\NTI386\R3load.exe -ctf I C:\docs\SAPNWABAP701SR1_TRIAL\SAP_NetWeaver_701_SR1_Export\DATA_UNITS\EXP1\DATA\SMIMCONT1.STR "C:\Program Files\sapinst_instdir\NW701\AS-ABAP\ADA\CENTRAL\DDLADA.TPL" SMIMCONT1.TSK ADA -l SMIMCONT1.log
    TRACE: 2010-03-16 21:16:29 com.sap.inst.migmon.LoadTask processPackage
    Loading of 'SMIMCONT1' import package into database:
    C:\usr\sap\NSP\SYS\exe\uc\NTI386\R3load.exe -i SMIMCONT1.cmd -dbcodepage 4103 -l SMIMCONT1.log -nolog -c 50000
    Below the log file import_monitor.java
    java version "1.4.2_19"
    Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_19-b04)
    Java HotSpot(TM) Client VM (build 1.4.2_19-b04, mixed mode)
    Import Monitor jobs: running 1, waiting 27, completed 0, failed 0, total 28.
    Import Monitor jobs: running 2, waiting 26, completed 0, failed 0, total 28.
    Import Monitor jobs: running 3, waiting 25, completed 0, failed 0, total 28.
    Loading of 'DOKCLU' import package: OK
    Import Monitor jobs: running 2, waiting 25, completed 1, failed 0, total 28.
    Import Monitor jobs: running 3, waiting 24, completed 1, failed 0, total 28.
    Below the 'last log file created before the abrupt interruption of the installation:
    File name: SMIMCONT1.log

  • Error installing SAP NetWeaver 7.2 ABAP Trial Version

    Hi,
    At the beginning of the installation of SAP NetWeaver 7.2 ABAP Trial Version the following error occurred:
    Program is starting... Please wait!
    ERROR      2010-12-28 18:58:18.804 syxxcniwrapper.cpp:105
    NI::CNIInit::CNIInit() lib=syslib module=syslib
    FSL-03000  Error initializing network library. SAPRETURN: 0xffffffff
    Opened sylib721.dll
    exe dir is C:UsersVINCIU~1AppDataLocalTempsapinst_exe.3164.1293569860
    MessageLib initialized successfully.
    Creating file C:UsersViníciusAppDataLocalTempsapinst_exe.3164.1293569860dev_sap_kernel_test_28_Dec_2010_18_58_18.
    Removed file C:UsersViníciusAppDataLocalTempsapinst_exe.3164.1293569860dev_sap_kernel_test_28_Dec_2010_18_58_18.
    Initialized SAP kernel tracing to file C:UsersVINCIU~1AppDataLocalTempsapinst_exe.3164.1293569860dev_sap_kernel
    Creating file C:UsersViníciusAppDataLocalTempsapinst_exe.3164.1293569860dev_sap_kernel_test_28_Dec_2010_18_58_18.
    Removed file C:UsersViníciusAppDataLocalTempsapinst_exe.3164.1293569860dev_sap_kernel_test_28_Dec_2010_18_58_18.
    Initialized SAP kernel tracing to file C:UsersVINCIU~1AppDataLocalTempsapinst_exe.3164.1293569860dev_sap_kernel
    Opened C:UsersVINCIU~1AppDataLocalTempsapinst_exe.3164.1293569860/iaguieng721.dll
    Error initializing network library. SAPRETURN: 0xffffffff
    Exception thrown near line 107 in file syxxcniwrapper.cpp
    Stack trace:
    iaxxcrunenv.cpp: 65: CController::getServerHostName()
    syxxcniwrapper.cpp: 88: NI::CNIInit::CNIInit()
    At line 107 file syxxcniwrapper.cpp
    Call stack:
    iaxxcrunenv.cpp: 65: CController::getServerHostName()
    syxxcniwrapper.cpp: 88: NI::CNIInit::CNIInit()
    Error initializing network library. SAPRETURN: 0xffffffff
    Failed action:  with parameters
    Error number 4294967295 error type SAP_RETURN
    --- Unicode interface pid = 2700 :
    gethostnameU16 encountered invalid UTF-8
    ed 63 69                                        |.ci             |
    Characters previously read:
    0056 0069 006e                           |Vin     |
    *--- Unicode interface -
    End of message -
    Exit status of child: 1
    what's the solution?
    thanks!

    to install SAP it is necessary to have your host in a network.
    If you are installing on a stand alone machine then you will have to install a loop back adapter if you are installing on windows.
    Also make below entry in the host file
    127.0.0.1           <host-name>
    Now ping 127.0.0.1 and see its giving proper response.

  • Error installing SAP IK XI 3.1 + SP2

    Have installed BOE XI 3.1 + SAP IK + BOE XI 3.1 SP2. Trying to install SAP IK SP2, I get the following error message...
    "The SAP unicode RFC library could not be found. This library is avaialble as a part of SAP Frontend, which is a pre-requiste for the installation of this software. Please install 'Unicode RFC libraries' feature in SAP GUI 710 installer, then re-run this setup"
    Per the installation documentation server side pre-requisites, I don't need SAP GUI installed on the server and have not installed it. I have installed SAP JCO. Copied the 2 dll files to Windows\System32 and copied the sapjco.jar to Tomcat shared\lib.
    SAP Integration Kit XI 3.1 installed ok.
    I am able to add the BW Server information in the SAP Authentication tab and import roles.
    Using SAPJCO 2.1.8
    Do I need SAP GUI on the server? Anybody seen this error message?
    Assistance appreciated.
    Thanks,
    Thiag.

    Ingo,
    Thanks for the response... I have both the librfc32.dll and sapjcorfc.dll in the Windows/System32 directory. SAP IK installed ok, able to set up SAP Authentication and import roles.
    I'm only getting this error with the install of SAP IK - SP2. I have checked the install logs also, there are no other error messages.
    Anything else, I can look at?
    Appreciate the assistance..
    Thanks,
    Thiag.

  • Error installing  SAP Netweaver Sneak Preview ABAP

    Hi
       I'm getting the following error when I try to install SAP Netweaver Sneak Preview ABAP.
    ERROR 2006-04-04 13:51:02
    MOS-01185  The subkey 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\NPFMntor' does not exist on the 'localhost' host.
    ERROR 2006-04-04 13:51:02
    FCO-00011  The step collect with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_GetSidNoProfiles|ind|ind|ind|ind|2|0|collect was executed with status ERROR .
    I'm on Windows XP SP2 Profession.
    By the way... is this the right forum?
    Thanks in Advance

    Hi
    This is something related to your anti virus software like norton.Please trun off Norton while Installing SAP and also make sure that the Id which you use to install SAP has administrator rights.
    Thanks
    prince jose

  • Error installing SAP Web IDE Hybrid App Toolkit Add-on 1.3.2

    Hi,
    I'm getting an HTTP 404 file not found error when i try to install SAP Web IDE Hybrid App Toolkit Add-on 1.3.2.
    Installing "com.sap.mp.cordova.plugins.corelibs" for ios
    Installing "com.sap.mp.cordova.plugins.apppreferences" for ios
    Installing "com.sap.mp.cordova.plugins.toolbar" for ios
    Installing "com.sap.mp.cordova.plugins.logon" for ios
    Fetching plugin "com.sap.mp.cordova.plugins.authproxy" via plugin registry
    npm http GET http://registry.cordova.io/com.sap.mp.cordova.plugins.authproxy
    npm http 404 http://registry.cordova.io/com.sap.mp.cordova.plugins.authproxy
    Failed to install 'com.sap.mp.cordova.plugins.logon':Error: 404 Not Found: com.sap.mp.cordova.plugins.authproxy
        at RegClient.<anonymous> (/usr/local/lib/node_modules/cordova/node_modules/cordova-lib/node_modules/npm/node_modules/npm-registry-client/lib/request.js:268:14)
        at Request.self.callback (/usr/local/lib/node_modules/cordova/node_modules/cordova-lib/node_modules/npm/node_modules/request/index.js:148:22)
        at Request.emit (events.js:98:17)
        at Request.<anonymous> (/usr/local/lib/node_modules/cordova/node_modules/cordova-lib/node_modules/npm/node_modules/request/index.js:876:14)
        at Request.emit (events.js:117:20)
        at IncomingMessage.<anonymous> (/usr/local/lib/node_modules/cordova/node_modules/cordova-lib/node_modules/npm/node_modules/request/index.js:827:12)
        at IncomingMessage.emit (events.js:117:20)
        at _stream_readable.js:944:16
        at process._tickCallback (node.js:448:13)
    Error: 404 Not Found: com.sap.mp.cordova.plugins.authproxy
        at RegClient.<anonymous> (/usr/local/lib/node_modules/cordova/node_modules/cordova-lib/node_modules/npm/node_modules/npm-registry-client/lib/request.js:268:14)
        at Request.self.callback (/usr/local/lib/node_modules/cordova/node_modules/cordova-lib/node_modules/npm/node_modules/request/index.js:148:22)
        at Request.emit (events.js:98:17)
        at Request.<anonymous> (/usr/local/lib/node_modules/cordova/node_modules/cordova-lib/node_modules/npm/node_modules/request/index.js:876:14)
        at Request.emit (events.js:117:20)
        at IncomingMessage.<anonymous> (/usr/local/lib/node_modules/cordova/node_modules/cordova-lib/node_modules/npm/node_modules/request/index.js:827:12)
        at IncomingMessage.emit (events.js:117:20)
        at _stream_readable.js:944:16
        at process._tickCallback (node.js:448:13)
    cmd error
    The node process of the build script exited with code 1.
    When i try to access the file manual i also get a 404:
    {"error": "not_found","reason": "document not found"}
    I'm installing IOS only on a Mac and all is fine until the error.
    is there something I've missed?
    Regards,
    Henrik

    Hi Henrik,
    Which is the version of Cordova and Kapsel you are using?
    Your cordova version should be 4.2.0 and Kapsel version should be 3.7.1.
    Regards,
    Dhani

Maybe you are looking for