Error installing SP1 for WLS 6.0 on Windows NT

I'm getting the following error dialog box when I try to install sp1 for
Weblogic server 6.0 on Windows NT :
WebLogic Server Service Pack 1 Installation failed.
You do not seem to have WebLogic Server 6.0 installed for BEAHOME
c:\bea
I do have WLS 6.0 installed under c:\bea. The server is running as
well.
The only thing I might have done differently than most others is that I
first uninstalled the existing WLS 6.0 on my machine and then
re-installed WLS 6.0 before trying to install SP1. But that shouldn't
really matter.
Is the SP1 installer looking for something in the registry?
Any help would be appreciated.
Thanks
Shriniwas

Thanks Ginny. That's what the problem was.
- Shriniwas
Ginny Peterson wrote:
>
Hi Shriniwas,
Make sure that the "level" attribute on the "release" element in the
registry.xml file is set to "6.0" not "6.0 Beta". The registry.xml file is
under the bea install directory. This problem may happen if the beta
version had been previously installed and then the GA release was installed
later.
- Ginny
<[email protected]> wrote in message news:[email protected]..
I'm getting the following error dialog box when I try to install sp1 for
Weblogic server 6.0 on Windows NT :
WebLogic Server Service Pack 1 Installation failed.
You do not seem to have WebLogic Server 6.0 installed for BEAHOME
c:\bea
I do have WLS 6.0 installed under c:\bea. The server is running as
well.
The only thing I might have done differently than most others is that I
first uninstalled the existing WLS 6.0 on my machine and then
re-installed WLS 6.0 before trying to install SP1. But that shouldn't
really matter.
Is the SP1 installer looking for something in the registry?
Any help would be appreciated.
Thanks
Shriniwas

Similar Messages

  • Installing Error in SP1 for SharePoint 2010

    hi
    i took a backup of share point site from staging server and tried to restore it on production server but when i get the following error.
    SP1 for share point 2010 was installed on the staging server so downloaded a ubersrv2010-kb2775353-fullfile-x64-glb.exe for SP1 now when i installing it i am getting the follwoing error
    please help why it's not getting installed

    http://social.technet.microsoft.com/Forums/office/en-US/86c19106-e477-457a-bd67-5aa2e74bfcfa/sharepoint-2010-sp1-installation?forum=sharepointadminprevious
    SharePoint 2010
    Language Pack SharePoint Foundation 2010
    Language Pack SharePoint Server 2010
    Microsoft SharePoint Foundation 2010 SP1
    Microsoft SharePoint Foundation 2010 Language Pack SP1
    Microsoft SharePoint Server 2010 SP1
    Microsoft 2010 Server Language Pack SP1
    If you dont have WebApps you dont need to install SP1 for WebApps.
    http://www.msdnques.info/135037/sharepoint-2010-sp1-installation/
    If this helped you resolve your issue, please mark it Answered

  • How to... install SP1 for SharePoint, Project Server, Project Pro2013

    Hello,
    Is there a document with the process to install SP1 for all the Project Server 2013 items?
    Thanks

    Hello,
    I don't believe there is one for Project Server 2013 but the SharePoint 2013 one will cover it, just include the Project Server 2013 patches as well as the SharePoint ones.:
    http://technet.microsoft.com/en-us/library/cc263467(v=office.15).aspx
    Paul
    Paul Mather | Twitter |
    http://pwmather.wordpress.com | CPS

  • I have problems installing update for PS Elements 9 under Windows 8.1. Are any problems known?

    I have problems installing update for PS Elements 9 under Windows 8.1. Are any problems known?

    Nobody can tell you anything without proper technical details. There is no point whatsoever in throwing around generalized assumptions without having exact error messages and so on.
    Mylenium

  • ERROR INSTALLING JINITIATOR 1.3.1.22 ON WINDOWS 98

    We are Migrating from iAS 9.0.4 to 10.1.2.0.2, consequently I also have to migrate the JInitiator on the client side.
    When I install JInitiator 1.3.1.22 on Windows 98, it Fails, I get this error :
    Error number 0x80070725
    Description : incompatible version of the RPC stub
    Setup will now terminate
    Why is this problem happen ?
    I have installed this version of JInitiator 1.3.1.22 on some Win98 PCS, some works and the others do not.
    Thank you,
    xtanto

    wasnt this answered here
    ERROR INSTALLING JINITIATOR 1.3.1.22 ON WINDOWS 98

  • After installed SP1 for SQL Server 2012, can no longer export to csv

    After installing SP1 today via Windows Update, I am no longer able to export data to csv using the SQL Server Import and Export wizard. I get the following error message:
    "Column information for the source and the destination data could not be retrieved, or the data types of source columns were not mapped correctly to those available on the destination provider."
    "Column "col1": Source data type "200" was not found in the data type mapping file."...
    (The above line repeats for each column)
    The work-around I have to do is to manually map each column in the "Edit Mappings..." option from the "Configure Flat File Destination" page of the wizard. This is an extreme inconvenience to have to have to edit the mappings and change
    each column to "string [DT_STR]" type from "byte stream [DT_BYTES]" type each time I want to export to csv. I did not have to do this before installing SP1; it worked perfectly for months with hundreds of exports prior to this update and
    no need to modify mapping.

    I am running Windows 7 64-bit, SQL Server 2012 Express edition. Again, just yesterday from Windows Update, I installed SQL Server 2012 Service Pack 1 (KB2674319), followed by Update Rollup for SQL Server 2012 Service Pack 1 (KB2793634). This situation was
    not occurring before these updates were installed, and I noticed it immediately after they were installed (and of course I restarted my computer after the updates).
    In SSMS I just now created a test DB and table to provide a step-by-step with screenshots.
    Here is the code I ran to create the test DB and table:
    CREATE DATABASE testDB;
    GO
    USE testDB;
    GO
    CREATE TABLE testTable
    id int,
    lname varchar(50),
    fname varchar(50),
    address varchar(50),
    city varchar(50),
    state char(2),
    dob date
    GO
    INSERT INTO testTable VALUES
    (1,'Smith','Bob','123 Main St.','Los Angeles','CA','20080212'),
    (2,'Doe','John','555 Rainbow Ln.','Chicago','IL','19580530'),
    (3,'Jones','Jane','999 Somewhere Pl.','Washington','DC','19651201'),
    (4,'Jackson','George','111 Hello Cir.','Dallas','TX','20010718');
    GO
    SELECT * FROM testTable;
    Results look good:
    id    lname    fname    address    city    state    dob
    1    Smith    Bob    123 Main St.    Los Angeles    CA    2008-02-12
    2    Doe    John    555 Rainbow Ln.    Chicago    IL    1958-05-30
    3    Jones    Jane    999 Somewhere Pl.    Washington    DC    1965-12-01
    4    Jackson    George    111 Hello Cir.    Dallas    TX    2001-07-18
    In Object Explorer, I right-click on the [testDB] database, choose "Tasks", then "Export Data..." and the SQL Server Import and Export Wizard appears. I click Next to leave all settings as-is on the "Choose a Data Source" page, then on the "Choose a Destination"
    page, under the "Destination" drop-down I choose "Flat File Destination" then browse to the desktop and name the file "table_export.csv" then click Next. On the "Specify Table Copy or Query" page I choose "Write a query to specify the data to transfer" then
    click Next. I type the following SQL statement:
    SELECT * FROM testTable;
    When clicking the "Parse" button I get the message "This SQL statement is valid."
    On to the next page, "Configure Flat File Destination" I try leaving the defaults then click Next. This is where I am getting the error message (see screenshot below):
    Then going to the "Edit Mappings..." option on the "Configure Flat File Destination" page, I see that all columns which were defined as varchar in the table are showing as type "byte stream [DT_BYTES]", size "0", the state column which is defined as char(2)
    shows correctly however with type "string [DT_STR]", size "2" (see screenshow below):
    So what I have to do is change the type for the lname, fname, address and city columns to "string [DT_STR]", then I am able to proceed with the export successfully. Again, this just started happening after installing these updates. As you can imagine, this
    is very frustrating, as I do a lot of exports from many tables, with a lot more columns than this test table.
    Thanks for your help.

  • How to install service for wls 7

    How to install NT service for wls 7 instance with pipe symbol (|) as part of
    -Dhttp.nonProxyHosts on the CMDLINE ? I'm having trouble with the | symbol on
    the command line ?
    Thanks,
    Jessie

    Hi Mark,
    Here is the info :
    C:\wlsdomains\SSLdomain>set CMDLINE="-hotspot -Xms32m -Xmx200m -Dhttp.proxyHost=
    snocache -Dhttp.proxyPort=8080 -Dhttps.proxyHost=snocache -Dhttps.proxyPort=8080
    -Dhttp.nonProxyHosts=\" | localhost | *.capgroup.com | SNO* | BRO* | \" -clas
    spath \"c:\weblogic7.0.2\jdk131_06\lib\tools.jar;c:\weblogic7.0.2\weblogic700\se
    rver\lib\weblogic_sp.jar;c:\weblogic7.0.2\weblogic700\server\lib\weblogic.jar;C:
    \Program Files\RadView\WebLOAD5.0\LiveConnect\Classes\" -Dweblogic.Name=SSLserve
    r -Dbea.home=\"c:\weblogic7.0.2\" -Dweblogic.management.username=admin -Dweblogi
    c.ProductionModeEnabled= -Djava.security.policy=\"c:\weblogic7.0.2\weblogic700\s
    erver\lib\weblogic.policy\" weblogic.Server"
    'localhost' is not recognized as an internal or external command,
    operable program or batch file
    | symbol is causing the 'localhost' is not recognized as an internal or external
    command error
    thanks,
    Jessie
    "Mark Griffith" <[email protected]> wrote:
    What is the exact syntax you are using and what is the "failure/problem"?
    Are you using CMD or mks?
    cheers
    mbg
    "Jessie Yau" <[email protected]> wrote in message
    news:3efa3b80$[email protected]..
    How to install NT service for wls 7 instance with pipe symbol (|) aspart
    of
    -Dhttp.nonProxyHosts on the CMDLINE ? I'm having trouble with the |symbol
    on
    the command line ?
    Thanks,
    Jessie

  • Error installing Driver for audio device in MS-6585 Motherboard

    Hi,
    I have MS-6585 Max L motherboard. I installed windows 2000 with SP4. When I tried to install driver for the audio device, it always fails with the following error.
    An error occurred during the installation of the device.
    The data is invalid.
    And in the Device status in the properties menu
    The drivers for this device are not installed. (Code 28)
    I tried to download the latest driver using the "Live Update" and it didn't help. I tried few other options suggested in the web.
    The usual cause of this problem in Windows 2000/XP systems is Registry keys that are set as read-only.
    From the Start menu, click Run and enter RegEdit to run the Registry Editor. Open the following - Keys => HKey_Local_machine => System => CurrentControlSet => Enum => PCI.
    You will see several keys in this form - Ven_xxxx - where xxxx represents a string such as - 1102&Dev_004&Subsys_00011103&Rev_04.
    In each of these folders there is another folder that has a long numerical name. Open each of these folders, and look for the DeviceDesc entry that matches the type of hardware that you are trying unsuccessfully to install. Use the right mouse button to click on the Ven_xxxx entry for that device, and click Permissions. If it is set to read-only, then that is the cause of the problem. To rectify it, change it to Allow Full Control.
    I'm stuck and I am not sure what else to try. Its not clear to me where the problem is. Is there any log I can look? Any other suggestions please
    BTW, It used to work..I had to reinstall windows 2000 and after the clean/format reinstallation it stopped working.
    thanks for any help
    Suresh

    It might be that the drivers are for WinXP. Are you 100% sure they are for 2000? Can you get a copy of XP, it would prabobly solve youre problem.

  • Error installing iTunes for windows 8 64 bit

    I can't install iTunes 64 bit in my new laptop. Installatione give me this error:
    Error installing assembly "Microsoft.VC80.CRT.type="win32".version="8.0.50727.6195".publicKeyToken="win32 ".version="8.0.50727.6195".publicKeyToken="1fc8b3b9a1e18e3b".processorArchitectu re="x86". ..........
    Anyone can help me?
    Thank's
    Ben

    No, I have windows 8 64 bit installed,; however I tried also with 32 bit version, but when I start the installation, a massage appears saying that I'm trying to install a 32 bit version while I need to download and install 64 bit version! However thank's

  • Error installing SQL Server Management Studio Express on Windows Vista RC1

    Hello NG,
    After installing SQL Server 2005 Express Edition on Windows Vista RC1, I wanted to install also the Managent Studio but I always receive the following error message:
    "Bei der Installation dieses Pakets ist ein unerwarteter Fehler aufgetreten. Es liegt eventuell ein das Paket betreffendes Problem vor. Der Fehlercode ist 29506."
    Where can I find more infos about this error-code?
    Anybody knows this problem?
    Thank in advance for every help.

    Thanks Nilashis....
    It worked for me as well...cheers............ :)
    -Lalith

  • Error installing update 7 over update 6 on Windows

    I installed SO8 update 6 this morning and then did "check for updates" and discovered update 7 was available.
    I downloaded the unsigned patch, unpacked it, then unpacked the installation files and finally ran the install (this double-wrapping of the install files is pain BTW!).
    The install recognizes I have a prior version of SO8 and proceeds to update it. I then, after a short while, get an error:
    Error 1305.Error reading from file G:\apps\StarOffice8\help\hu\shared.jar.9161. Verify the file exists and that you can access it.
    The weird thing is, the update 7 install is creating the help/hu directory and its contents. In my update 6 install that directory doesn't exist. Originally I though that the problem was that I did a custom install of update 6 and only installed support for English. So I went back and had update 6 install all language components. Then I saw there was still no help/hu directory.
    Watching the install process of update 7 the file it complains about comes into existence, then suddenly has a zero size, then a real size, and fluctuates like that before the error message finally pops up.
    Anyone have any ideas on how to resolve this?
    Thanks,
    David

    False alarm. Turned out there was a bad block on the disk within one of the installation cab files.

  • Disp+work.EXE stopped when installing NW07 for CRM 2007 on Maxdb Windows

    Hi,
    I am installing NW07 for CRM 2007 on Maxdb 7.7 and Windows 2004 64bit.
    The installer cannot start the dispatcher on step 32. The dispatcher starts with green and is running  a while but Dialog queue is standstill. After few secodes the dispatcher changes to yellow as become disp+work.EXE stopped.
    Any advice? I have checked the RAM and log sizes etc and they seem to be ok. Database is running ok.
    System cannot connect the database?
    Here is dev_w0 file contets:
    trc file: "dev_disp", trc level: 1, release: "700"
    sysno      01
    sid        XCR
    systemid   562 (PC with Windows NT)
    relno      7000
    patchlevel 0
    patchno    144
    intno      20050900
    make:      multithreaded, Unicode, 64 bit, optimized
    pid        2260
    Sun Nov 16 16:56:01 2008
    kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
    length of sys_adm_ext is 576 bytes
    SWITCH TRC-HIDE on ***
    ***LOG Q00=> DpSapEnvInit, DPStart (01 2260) [dpxxdisp.c   1243]
         shared lib "dw_xml.dll" version 144 successfully loaded
         shared lib "dw_xtc.dll" version 144 successfully loaded
         shared lib "dw_stl.dll" version 144 successfully loaded
         shared lib "dw_gui.dll" version 144 successfully loaded
         shared lib "dw_mdm.dll" version 144 successfully loaded
    rdisp/softcancel_sequence :  -> 0,5,-1
    use internal message server connection to port 3901
    Sun Nov 16 16:56:06 2008
    WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
    ***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c  5371]
    MtxInit: 30000 0 0
    DpSysAdmExtInit: ABAP is active
    DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
    DpIPCInit2: start server >ESITV016LAB_XCR_01                      <
    DpShMCreate: sizeof(wp_adm)          25168     (1480)
    DpShMCreate: sizeof(tm_adm)          5652128     (28120)
    DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
    DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
    DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
    DpShMCreate: sizeof(comm_adm)          552080     (1088)
    DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
    DpShMCreate: sizeof(slock_adm)          0     (104)
    DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    DpShMCreate: sizeof(file_adm)          0     (72)
    DpShMCreate: sizeof(vmc_adm)          0     (1864)
    DpShMCreate: sizeof(wall_adm)          (41664/36752/64/192)
    DpShMCreate: sizeof(gw_adm)     48
    DpShMCreate: SHM_DP_ADM_KEY          (addr: 000000000EE70050, size: 6348592)
    DpShMCreate: allocated sys_adm at 000000000EE70050
    DpShMCreate: allocated wp_adm at 000000000EE72150
    DpShMCreate: allocated tm_adm_list at 000000000EE783A0
    DpShMCreate: allocated tm_adm at 000000000EE78400
    DpShMCreate: allocated wp_ca_adm at 000000000F3DC2A0
    DpShMCreate: allocated appc_ca_adm at 000000000F3E2060
    DpShMCreate: allocated comm_adm at 000000000F3E3FA0
    DpShMCreate: system runs without slock table
    DpShMCreate: system runs without file table
    DpShMCreate: allocated vmc_adm_list at 000000000F46AC30
    DpShMCreate: allocated gw_adm at 000000000F46ACB0
    DpShMCreate: system runs without vmc_adm
    DpShMCreate: allocated ca_info at 000000000F46ACE0
    DpShMCreate: allocated wall_adm at 000000000F46ACF0
    MBUF state OFF
    DpCommInitTable: init table for 500 entries
    ThTaskStatus: rdisp/reset_online_during_debug 0
    EmInit: MmSetImplementation( 2 ).
    MM global diagnostic options set: 0
    <ES> client 0 initializing ....
    <ES> InitFreeList
    <ES> block size is 4096 kByte.
    Using implementation view
    <EsNT> Using memory model view.
    <EsNT> Memory Reset disabled as NT default
    <ES> 127 blocks reserved for free list.
    ES initialized.
    Sun Nov 16 16:56:07 2008
    rdisp/http_min_wait_dia_wp : 1 -> 1
    ***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c   1633]
    ***LOG Q0K=> DpMsAttach, mscon ( ESITV016LAB) [dpxxdisp.c   11822]
    DpStartStopMsg: send start message (myname is >ESITV016LAB_XCR_01                      <)
    DpStartStopMsg: start msg sent
    CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
    CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
    CCMS: start to initalize 3.X shared alert area (first segment).
    DpMsgAdmin: Set release to 7000, patchlevel 0
    MBUF state PREPARED
    MBUF component UP
    DpMBufHwIdSet: set Hardware-ID
    ***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
    DpMsgAdmin: Set patchno for this platform to 144
    Release check o.K.
    Sun Nov 16 16:56:47 2008
    ERROR => DpHdlDeadWp: W0 (pid 1608) died [dpxxdisp.c   14532]
    ERROR => DpHdlDeadWp: W1 (pid 3940) died [dpxxdisp.c   14532]
    ERROR => DpHdlDeadWp: W2 (pid 636) died [dpxxdisp.c   14532]
    ERROR => DpHdlDeadWp: W3 (pid 3484) died [dpxxdisp.c   14532]
    ERROR => DpHdlDeadWp: W4 (pid 3504) died [dpxxdisp.c   14532]
    ERROR => DpHdlDeadWp: W5 (pid 1108) died [dpxxdisp.c   14532]
    ERROR => DpHdlDeadWp: W6 (pid 3512) died [dpxxdisp.c   14532]
    ERROR => DpHdlDeadWp: W7 (pid 3592) died [dpxxdisp.c   14532]
    ERROR => DpHdlDeadWp: W8 (pid 3616) died [dpxxdisp.c   14532]
    ERROR => DpHdlDeadWp: W9 (pid 3608) died [dpxxdisp.c   14532]
    my types changed after wp death/restart 0xbf --> 0xbe
    ERROR => DpHdlDeadWp: W10 (pid 3368) died [dpxxdisp.c   14532]
    my types changed after wp death/restart 0xbe --> 0xbc
    ERROR => DpHdlDeadWp: W11 (pid 1388) died [dpxxdisp.c   14532]
    my types changed after wp death/restart 0xbc --> 0xb8
    ERROR => DpHdlDeadWp: W12 (pid 3276) died [dpxxdisp.c   14532]
    ERROR => DpHdlDeadWp: W13 (pid 1256) died [dpxxdisp.c   14532]
    ERROR => DpHdlDeadWp: W14 (pid 3400) died [dpxxdisp.c   14532]
    my types changed after wp death/restart 0xb8 --> 0xb0
    ERROR => DpHdlDeadWp: W15 (pid 2376) died [dpxxdisp.c   14532]
    my types changed after wp death/restart 0xb0 --> 0xa0
    ERROR => DpHdlDeadWp: W16 (pid 3032) died [dpxxdisp.c   14532]
    my types changed after wp death/restart 0xa0 --> 0x80
    DP_FATAL_ERROR => DpWPCheck: no more work processes
    DISPATCHER EMERGENCY SHUTDOWN ***
    increase tracelevel of WPs
    NiWait: sleep (10000ms) ...
    NiISelect: timeout 10000ms
    NiISelect: maximum fd=421
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Sun Nov 16 16:56:57 2008
    NiISelect: TIMEOUT occured (10000ms)
    dump system status
    Workprocess Table (long)               Sun Nov 16 14:56:57 2008
    ========================
    No Ty. Pid      Status  Cause Start Err Sem CPU    Time  Program          Cl  User         Action                    Table
    0 DIA     1608 Ended         no      1   0        0                                                                         
    1 DIA     3940 Ended         no      1   0        0                                                                         
    2 DIA      636 Ended         no      1   0        0                                                                         
    3 DIA     3484 Ended         no      1   0        0                                                                         
    4 DIA     3504 Ended         no      1   0        0                                                                         
    5 DIA     1108 Ended         no      1   0        0                                                                         
    6 DIA     3512 Ended         no      1   0        0                                                                         
    7 DIA     3592 Ended         no      1   0        0                                                                         
    8 DIA     3616 Ended         no      1   0        0                                                                         
    9 DIA     3608 Ended         no      1   0        0                                                                         
    10 UPD     3368 Ended         no      1   0        0                                                                         
    11 ENQ     1388 Ended         no      1   0        0                                                                         
    12 BTC     3276 Ended         no      1   0        0                                                                         
    13 BTC     1256 Ended         no      1   0        0                                                                         
    14 BTC     3400 Ended         no      1   0        0                                                                         
    15 SPO     2376 Ended         no      1   0        0                                                                         
    16 UP2     3032 Ended         no      1   0        0                                                                         
    Dispatcher Queue Statistics               Sun Nov 16 14:56:57 2008
    ===========================
    --------++++--
    +
    Typ
    now
    high
    max
    writes
    reads
    --------++++--
    +
    NOWP
    0
    2
    2000
    6
    6
    --------++++--
    +
    DIA
    5
    5
    2000
    5
    0
    --------++++--
    +
    UPD
    0
    0
    2000
    0
    0
    --------++++--
    +
    ENQ
    0
    0
    2000
    0
    0
    --------++++--
    +
    BTC
    0
    0
    2000
    0
    0
    --------++++--
    +
    SPO
    0
    0
    2000
    0
    0
    --------++++--
    +
    UP2
    0
    0
    2000
    0
    0
    --------++++--
    +
    max_rq_id          12
    wake_evt_udp_now     0
    wake events           total     8,  udp     7 ( 87%),  shm     1 ( 12%)
    since last update     total     8,  udp     7 ( 87%),  shm     1 ( 12%)
    Dump of tm_adm structure:               Sun Nov 16 14:56:57 2008
    =========================
    Term    uid  man user    term   lastop  mod wp  ta   a/i (modes)
    Workprocess Comm. Area Blocks               Sun Nov 16 14:56:57 2008
    =============================
    Slots: 300, Used: 1, Max: 0
    --------++--
    +
    id
    owner
    pid
    eyecatcher
    --------++--
    +
    0
    DISPATCHER
    -1
    WPCAAD000
    NiWait: sleep (5000ms) ...
    NiISelect: timeout 5000ms
    NiISelect: maximum fd=421
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Sun Nov 16 16:57:02 2008
    NiISelect: TIMEOUT occured (5000ms)
    DpHalt: shutdown server >ESITV016LAB_XCR_01                      < (normal)
    DpJ2eeDisableRestart
    DpModState: buffer in state MBUF_PREPARED
    NiBufSend starting
    NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
    MsINiWrite: sent 110 bytes
    MsIModState: change state to SHUTDOWN
    DpModState: change server state from STARTING to SHUTDOWN
    Switch off Shared memory profiling
    ShmProtect( 57, 3 )
    ShmProtect(SHM_PROFILE, SHM_PROT_RW
    ShmProtect( 57, 1 )
    ShmProtect(SHM_PROFILE, SHM_PROT_RD
    DpWakeUpWps: wake up all wp's
    Stop work processes
    Stop gateway
    killing process (4076) (SOFT_KILL)
    Stop icman
    killing process (3800) (SOFT_KILL)
    Terminate gui connections
    wait for end of work processes
    wait for end of gateway
    [DpProcDied] Process lives  (PID:4076  HANDLE:388)
    waiting for termination of gateway ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=421
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Sun Nov 16 16:57:03 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process died  (PID:4076  HANDLE:388)
    wait for end of icman
    [DpProcDied] Process lives  (PID:3800  HANDLE:396)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=421
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Sun Nov 16 16:57:04 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:3800  HANDLE:396)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=421
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Sun Nov 16 16:57:05 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:3800  HANDLE:396)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=421
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Sun Nov 16 16:57:06 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:3800  HANDLE:396)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=421
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Sun Nov 16 16:57:07 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:3800  HANDLE:396)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=421
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Sun Nov 16 16:57:08 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:3800  HANDLE:396)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=421
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Sun Nov 16 16:57:09 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:3800  HANDLE:396)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=421
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Sun Nov 16 16:57:10 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:3800  HANDLE:396)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=421
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Sun Nov 16 16:57:11 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:3800  HANDLE:396)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=421
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Sun Nov 16 16:57:12 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:3800  HANDLE:396)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=421
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Sun Nov 16 16:57:13 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:3800  HANDLE:396)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=421
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Sun Nov 16 16:57:14 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process died  (PID:3800  HANDLE:396)
    DpStartStopMsg: send stop message (myname is >ESITV016LAB_XCR_01                      <)
    NiIMyHostName: hostname = 'ESITV016LAB'
    AdGetSelfIdentRecord: >                                                                           <
    AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
    DpConvertRequest: net size = 189 bytes
    NiBufSend starting
    NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
    MsINiWrite: sent 562 bytes
    send msg (len 110+452) to name                    -, type 4, key -
    DpStartStopMsg: stop msg sent
    NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 2 recv would block (errno=EAGAIN)
    NiIRead: read for hdl 2 timed out (0ms)
    DpHalt: no more messages from the message server
    DpHalt: send keepalive to synchronize with the message server
    NiBufSend starting
    NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
    MsINiWrite: sent 114 bytes
    send msg (len 110+4) to name           MSG_SERVER, type 0, key -
    MsSndName: MS_NOOP ok
    Send 4 bytes to MSG_SERVER
    NiIRead: hdl 2 recv would block (errno=EAGAIN)
    NiIPeek: peek successful for hdl 2 (r)
    NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=114
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 114 bytes
    MSG received, len 110+4, flag 3, from MSG_SERVER          , typ 0, key -
    Received 4 bytes from MSG_SERVER                             
    Received opcode MS_NOOP from msg_server, reply MSOP_OK
    MsOpReceive: ok
    MsSendKeepalive : keepalive sent to message server
    NiIRead: hdl 2 recv would block (errno=EAGAIN)
    Sun Nov 16 16:57:15 2008
    NiIPeek: peek for hdl 2 timed out (r; 1000ms)
    NiIRead: read for hdl 2 timed out (1000ms)
    DpHalt: no more messages from the message server
    DpHalt: sync with message server o.k.
    detach from message server
    ***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c   12168]
    NiBufSend starting
    NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
    MsINiWrite: sent 110 bytes
    MsIDetach: send logout to msg_server
    MsIDetach: call exit function
    DpMsShutdownHook called
    NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
    SiSelNSet: set events of sock 312 to: ---
    NiBufISelRemove: remove hdl 2 from set0
    SiSelNRemove: removed sock 312 (pos=2)
    SiSelNRemove: removed sock 312
    NiSelIRemove: removed hdl 2
    MBUF state OFF
    AdGetSelfIdentRecord: >                                                                           <
    AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
    blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/17
    LOCK WP ca_blk 1
    make DISP owner of wp_ca_blk 1
    DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
    MBUF component DOWN
    NiICloseHandle: shutdown and close hdl 2 / sock 312
    NiBufIClose: clear extension for hdl 2
    MsIDetach: detach MS-system
    cleanup EM
    EsCleanup ....
    EmCleanup() -> 0
    Es2Cleanup: Cleanup ES2
    ***LOG Q05=> DpHalt, DPStop ( 2260) [dpxxdisp.c   10421]
    Good Bye .....
    BR,
    Kari

    Hi,
    here is the right log content:
    trc file: "dev_w0", trc level: 1, release: "700"
    ACTIVE TRACE LEVEL           1
    ACTIVE TRACE COMPONENTS      all, MJ
    B 
    B Mon Nov 17 10:24:39 2008
    B  create_con (con_name=R/3)
    B  *** ERROR => Invalid profile parameter dbms/type (or environment variable dbms_type) = <undef>, cannot load DB library
    [dbcon.c      4537]
    M sysno      01
    M sid        XCR
    M systemid   562 (PC with Windows NT)
    M relno      7000
    M patchlevel 0
    M patchno    144
    M intno      20050900
    M make:      multithreaded, Unicode, 64 bit, optimized
    M pid        2184
    M
    M  kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
    M  length of sys_adm_ext is 576 bytes
    M  ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 2184) [dpxxdisp.c   1305]
    I  MtxInit: 30000 0 0
    M  DpSysAdmExtCreate: ABAP is active
    M  DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
    M 
    M Mon Nov 17 10:24:40 2008
    M  DpShMCreate: sizeof(wp_adm)          25168     (1480)
    M  DpShMCreate: sizeof(tm_adm)          5652128     (28120)
    M  DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
    M  DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
    M  DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
    M  DpShMCreate: sizeof(comm_adm)          552080     (1088)
    M  DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
    M  DpShMCreate: sizeof(slock_adm)          0     (104)
    M  DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    M  DpShMCreate: sizeof(file_adm)          0     (72)
    M  DpShMCreate: sizeof(vmc_adm)          0     (1864)
    M  DpShMCreate: sizeof(wall_adm)          (41664/36752/64/192)
    M  DpShMCreate: sizeof(gw_adm)     48
    M  DpShMCreate: SHM_DP_ADM_KEY          (addr: 0000000010E70050, size: 6348592)
    M  DpShMCreate: allocated sys_adm at 0000000010E70050
    M  DpShMCreate: allocated wp_adm at 0000000010E72150
    M  DpShMCreate: allocated tm_adm_list at 0000000010E783A0
    M  DpShMCreate: allocated tm_adm at 0000000010E78400
    M  DpShMCreate: allocated wp_ca_adm at 00000000113DC2A0
    M  DpShMCreate: allocated appc_ca_adm at 00000000113E2060
    M  DpShMCreate: allocated comm_adm at 00000000113E3FA0
    M  DpShMCreate: system runs without slock table
    M  DpShMCreate: system runs without file table
    M  DpShMCreate: allocated vmc_adm_list at 000000001146AC30
    M  DpShMCreate: allocated gw_adm at 000000001146ACB0
    M  DpShMCreate: system runs without vmc_adm
    M  DpShMCreate: allocated ca_info at 000000001146ACE0
    M  DpShMCreate: allocated wall_adm at 000000001146ACF0
    M  ThTaskStatus: rdisp/reset_online_during_debug 0
    X  EmInit: MmSetImplementation( 2 ).
    X  MM global diagnostic options set: 0
    X  <ES> client 0 initializing ....
    X  Using implementation view
    X  <EsNT> Using memory model view.
    M  <EsNT> Memory Reset disabled as NT default
    X  ES initialized.
    M 
    M Mon Nov 17 10:24:41 2008
    M  ThInit: running on host ESITV016LAB
    M  calling db_connect ...
    B  create_con (con_name=R/3)
    B  *** ERROR => Invalid profile parameter dbms/type (or environment variable dbms_type) = <undef>, cannot load DB library
    [dbcon.c      4537]
    M  ***LOG R19=> ThInit, db_connect ( DB-Connect 008192) [thxxhead.c   1440]
    M  in_ThErrHandle: 1
    M  *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   10468]
    M 
    M  Info for wp 0
    M 
    M    stat = WP_RUN
    M    waiting_for = NO_WAITING
    M    reqtype = DP_RQ_DIAWP
    M    act_reqtype = NO_REQTYPE
    M    rq_info = 0
    M    tid = -1
    M    mode = 255
    M    len = -1
    M    rq_id = 65535
    M    rq_source =
    M    last_tid = 0
    M    last_mode = 0
    M    semaphore = 0
    M    act_cs_count = 0
    M    csTrack = 0
    M    csTrackRwExcl = 0
    M    csTrackRwShrd = 0
    M    mode_cleaned_counter = 0
    M    control_flag = 0
    M    int_checked_resource(RFC) = 0
    M    ext_checked_resource(RFC) = 0
    M    int_checked_resource(HTTP) = 0
    M    ext_checked_resource(HTTP) = 0
    M    report = >                                        <
    M    action = 0
    M    tab_name = >                              <
    M    attachedVm = no VM
    M 
    M  *****************************************************************************
    M  *
    M  *  LOCATION    SAP-Server ESITV016LAB_XCR_01 on host ESITV016LAB (wp 0)
    M  *  ERROR       ThInit: db_connect
    M  *
    M  *  TIME        Mon Nov 17 10:24:41 2008
    M  *  RELEASE     700
    M  *  COMPONENT   Taskhandler
    M  *  VERSION     1
    M  *  RC          13
    M  *  MODULE      thxxhead.c
    M  *  LINE        10688
    M  *  COUNTER     1
    M  *
    M  *****************************************************************************
    M 
    M  PfStatDisconnect: disconnect statistics
    M  Entering TH_CALLHOOKS
    M  ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
    M  *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   724]
    M  *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c  261]
    M  Entering ThSetStatError
    M  ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
    M  Entering ThReadDetachMode
    M  call ThrShutDown (1)...
    M  ***LOG Q02=> wp_halt, WPStop (Workproc 0 2184) [dpnttool.c   327]
    BR,
    Kari

  • Error installing MaxDB 7.6.03.09 on windows 32 bit on NW70 SR2 sapinst

    MaxDB experts,
    Hello.  I am trying to install SAP NW70SR2 (JAVA AS) on MaxDB 7.6.03.09 with windows 32 bit OS.  Brand new install, JAVA AS central system.
    Our problem is in the SAPINST phase:
    Install database server software
    I see this in the sapinst.log file:
    starting installation phase of package Base 7.6.03.09 32 bit
    ERR: InstallRegistry::newPackage(): can't add Package "Base" -> "c:/sapdb/programs": already exists!
    installation exited abnormally  at Th, Apr 09, 2009 at 16:19:41
    ERROR      2009-04-09 16:19:41 [iaxxinscbk.cpp:282]
               abortInstallation
    MDB-07020  The database installer reported an error. Some database applications are probably still running. Check the log file sdbinst.log.
    And this is in the bottom of the sdbinst.log file
    starting installation phase of package Base 7.6.03.09 32 bit
    ERR: InstallRegistry::newPackage(): can't add Package "Base" -> "c:/sapdb/programs": already exists!
    installation exited abnormally  at Th, Apr 09, 2009 at 16:19:41
    The sdbinst.log has lots of other interesting info:
    This is the top of the file:
    Installation of MaxDB
    +     ***********************+
    starting installation Th, Apr 09, 2009 at 16:18:56
    operating system: Windows I386 NT 5.1 Service Pack 3
    callers working directory: C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ADA/CENTRAL/AS
    installer directory: S:/NW70SR3-MAXDB-INSTALL/Extracts/32 BIT RDBMS_MAXDB_7.6.03_Build_09 51033492_10/DATA_UNITS/MAXDB_WINDOWS_I386
    archive directory: S:/NW70SR3-MAXDB-INSTALL/Extracts/32 BIT RDBMS_MAXDB_7.6.03_Build_09 51033492_10/DATA_UNITS/MAXDB_WINDOWS_I386
    starting preparing phase of package Base 7.6.03.09 32 bit
    getInstalledReleasesWin(): wrong version format
    checking interferences to other packages... ok
    I'm not sure why there is a version info problem.
    This is a windows PC I'm trying to put this on.  It's 32 bit so that is why I had to get the SR2 DVDs.  The SR3 DVD won't let you install via 32 bit OS.
    I downloaded all the software from OSS marketplace and some from our delivered DVDs:
    We have these DVDs
    32 BIT BS_2005_SR2_SAP_Installation_Master  51033208
    32 BIT NW_7.0_SR2_Kernel_WINDOWS__LNX_X86 51033262
    NW 7.0 SR2 SAP Installation Export 51032246
    NW 7.0 SR2 SP09 Java based SW Comp 51032257
    I pulled this down off the marketplace (in the NW70SR3 area)
    32 BIT RDBMS_MAXDB_7.6.03_Build_09 51033492_10
    I've searched all through OSS/SDN for someone who has this same issue.  All our other systems are AIX/oracle so trouble-shooting MaxDB is completely new to me. 
    Can  anyone point me into the right direction to get this figured out?  I'm tried just re-running the install, same error.  And removing the c:/sapdb/programs, no good. 
    Thanks!
    Nick

    Natalia,
    Here is the entire Install log for MaxDB.  Also remember that this was called as part of an SAP system install:
    MaxDBServer_install-10.04.2009-10.05.log
    INSTALLER_INFO: Version = 7.6.03 Build 009-123-163-622
    INSTALLER_INFO: Changelist = 163622
    INSTALLER_INFO: MakeId = 267230
    INSTALLER_INFO: Type = kit
    SYS_INFO: Host name = DGW58J1L
    SYS_INFO: System = Windows
    SYS_INFO: Architecture = I386
    SYS_INFO: Version = NT 5.1
    SYS_INFO: Subversion = Service Pack 3
    CALL: SDBINST -indep_prog C:\sapdb\programs -indep_data C:\sapdb\data -depend C:\sapdb\CEL\db -profile Server -b
    STDOUT:
         Installation of MaxDB 
    STDOUT:      ***********************
    STDOUT: starting installation Fr, Apr 10, 2009 at 10:04:43
    STDOUT: operating system: Windows I386 NT 5.1 Service Pack 3
    STDOUT: callers working directory: C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ADA/CENTRAL/AS
    STDOUT: installer directory: S:/NW70SR3-MAXDB-INSTALL/Extracts/32 BIT RDBMS_MAXDB_7.6.03_Build_09 51033492_10/DATA_UNITS/MAXDB_WINDOWS_I386
    STDOUT: archive directory: S:/NW70SR3-MAXDB-INSTALL/Extracts/32 BIT RDBMS_MAXDB_7.6.03_Build_09 51033492_10/DATA_UNITS/MAXDB_WINDOWS_I386
    STDOUT:
    MSG: debug package SDBBAS.SDB is valid
    MSG: debug package SDBKRN.SDB is valid
    MSG: debug package SDBUTL.SDB is valid
    STDOUT:
    starting preparing phase of package Base 7.6.03.09 32 bit
    STDOUT: -
    MSG: service "sql6" in  "C:/WINDOWS/system32/drivers/etc/services" found
    MSG: service "sapdbni72" in  "C:/WINDOWS/system32/drivers/etc/services" found
    MSG: InstallRegistry: space check ok: 127249572 kb on C: (156288320 kb total) available
    MSG: install registry successfully locked
    MSG: read 12 PACKAGES
    MSG: net registry size = 121301 bytes
    MSG: InstallRegistry: reserved 1024 kb disk space
    STDOUT: checking interferences to other packages... STDOUT: ok
    STDOUT: collecting data finished:
    STDOUT: independent data path: c:/sapdb/data
    STDOUT: independent program path: c:/sapdb/programs
    STDOUT: start extraction test run of "S:/NW70SR3-MAXDB-INSTALL/Extracts/32 BIT RDBMS_MAXDB_7.6.03_Build_09 51033492_10/DATA_UNITS/MAXDB_WINDOWS_I386/SDBBAS.TGZ"
    STDOUT:
    package Base successfully checked
    STDOUT:
    starting preparing phase of package SQLDBC 7.6.03.09 32 bit
    STDOUT: -
    WRN: try to install release "7.6.03.09" over existing "7.6.5.9"
    MSG: update test: installed release newer
    MSG:  update from "7.6.5.9" to "7.6.03.09" not allowed
    STDERR: cannot downgrade package
    STDOUT: skipping package
    STDOUT:
    starting preparing phase of package SQLDBC 76 7.6.03.09 32 bit
    STDOUT: -
    STDOUT: checking interferences to other packages... STDOUT: ok
    STDOUT: collecting data finished:
    STDOUT: dbc path: c:/sapdb/programs
    STDOUT: start extraction test run of "S:/NW70SR3-MAXDB-INSTALL/Extracts/32 BIT RDBMS_MAXDB_7.6.03_Build_09 51033492_10/DATA_UNITS/MAXDB_WINDOWS_I386/SQLDBC76.TGZ"
    STDOUT:
    package SQLDBC 76 successfully checked
    STDOUT:
    starting preparing phase of package Fastload API 7.6.03.09 32 bit
    STDOUT: -
    STDOUT: checking interferences to other packages... STDOUT: ok
    STDOUT: collecting data finished:
    STDOUT: fastload path: c:/sapdb/programs
    STDOUT: start extraction test run of "S:/NW70SR3-MAXDB-INSTALL/Extracts/32 BIT RDBMS_MAXDB_7.6.03_Build_09 51033492_10/DATA_UNITS/MAXDB_WINDOWS_I386/FASTLOAD.TGZ"
    STDOUT:
    package Fastload API successfully checked
    STDOUT:
    starting preparing phase of package PCR 7104 7.1.04.45
    STDOUT: -
    STDOUT: checking interferences to other packages... STDOUT: ok
    STDOUT: collecting data finished:
    STDOUT: independent program path: c:/sapdb/programs
    STDOUT: start extraction test run of "S:/NW70SR3-MAXDB-INSTALL/Extracts/32 BIT RDBMS_MAXDB_7.6.03_Build_09 51033492_10/DATA_UNITS/MAXDB_WINDOWS_I386/PCR7104.TGZ"
    STDOUT:
    package PCR 7104 successfully checked
    STDOUT:
    starting preparing phase of package PCR 7300 7.3.00.59
    STDOUT: -
    STDOUT: checking interferences to other packages... STDOUT: ok
    STDOUT: collecting data finished:
    STDOUT: precompiler 7300 path: c:/sapdb/programs
    STDOUT: start extraction test run of "S:/NW70SR3-MAXDB-INSTALL/Extracts/32 BIT RDBMS_MAXDB_7.6.03_Build_09 51033492_10/DATA_UNITS/MAXDB_WINDOWS_I386/PCR7300.TGZ"
    STDOUT:
    package PCR 7300 successfully checked
    STDOUT:
    starting preparing phase of package PCR 7301 7.3.01.22
    STDOUT: -
    STDOUT: checking interferences to other packages... STDOUT: ok
    STDOUT: collecting data finished:
    STDOUT: precompiler 7301 path: c:/sapdb/programs
    STDOUT: start extraction test run of "S:/NW70SR3-MAXDB-INSTALL/Extracts/32 BIT RDBMS_MAXDB_7.6.03_Build_09 51033492_10/DATA_UNITS/MAXDB_WINDOWS_I386/PCR7301.TGZ"
    STDOUT:
    package PCR 7301 successfully checked
    STDOUT:
    starting preparing phase of package PCR 7403 7.4.03.49 32 bit
    STDOUT: -
    STDOUT: checking interferences to other packages... STDOUT: ok
    STDOUT: collecting data finished:
    STDOUT: precompiler 7403 path: c:/sapdb/programs
    STDOUT: start extraction test run of "S:/NW70SR3-MAXDB-INSTALL/Extracts/32 BIT RDBMS_MAXDB_7.6.03_Build_09 51033492_10/DATA_UNITS/MAXDB_WINDOWS_I386/PCR7403.TGZ"
    STDOUT:
    package PCR 7403 successfully checked
    STDOUT:
    starting preparing phase of package PCR 7500 7.5.00.46 32 bit
    STDOUT: -
    STDOUT: checking interferences to other packages... STDOUT: ok
    STDOUT: collecting data finished:
    STDOUT: precompiler 7500 path: c:/sapdb/programs
    STDOUT: start extraction test run of "S:/NW70SR3-MAXDB-INSTALL/Extracts/32 BIT RDBMS_MAXDB_7.6.03_Build_09 51033492_10/DATA_UNITS/MAXDB_WINDOWS_I386/PCR7500.TGZ"
    STDOUT:
    package PCR 7500 successfully checked
    STDOUT:
    starting preparing phase of package SAP Utilities 7.6.03.09 32 bit
    STDOUT: -
    STDOUT: checking interferences to other packages... STDOUT: ok
    STDOUT: collecting data finished:
    STDOUT: : c:/sapdb/data
    STDOUT: independent program path: c:/sapdb/programs
    STDOUT: start extraction test run of "S:/NW70SR3-MAXDB-INSTALL/Extracts/32 BIT RDBMS_MAXDB_7.6.03_Build_09 51033492_10/DATA_UNITS/MAXDB_WINDOWS_I386/SAPUTL.TGZ"
    STDOUT:
    package SAP Utilities successfully checked
    STDOUT:
    starting preparing phase of package DB Analyzer 7.6.03.09 32 bit
    STDOUT: -
    WRN: try to install release "7.6.03.09" over existing "7.6.5.9"
    MSG: update test: installed release newer
    MSG:  update from "7.6.5.9" to "7.6.03.09" not allowed
    STDERR: cannot downgrade package
    STDOUT: skipping package
    STDOUT:
    starting preparing phase of package JDBC 7.6.03.03
    STDOUT: -
    STDERR: cannot downgrade package
    STDOUT: skipping package
    STDOUT:
    starting preparing phase of package Server Utilities 7.6.03.09 32 bit
    STDOUT: -
    WRN: try to install release "7.6.03.09" over existing "7.6.5.9"
    MSG: update test: installed release newer
    MSG:  update from "7.6.5.9" to "7.6.03.09" not allowed
    STDERR: cannot downgrade package
    STDOUT: skipping package
    STDOUT:
    starting preparing phase of package Database Kernel 7.6.03.09 32 bit
    STDOUT: -
    STDOUT: checking interferences to other packages... STDOUT: ok
    STDOUT: collecting data finished:
    STDOUT: dependent path: c:/sapdb/cel/db
    STDOUT: start extraction test run of "S:/NW70SR3-MAXDB-INSTALL/Extracts/32 BIT RDBMS_MAXDB_7.6.03_Build_09 51033492_10/DATA_UNITS/MAXDB_WINDOWS_I386/SDBKRN.TGZ"
    STDOUT:
    package Database Kernel successfully checked
    STDOUT:
    starting preparing phase of package Redist Python 7.6.03.09 32 bit
    STDOUT: -
    WRN: try to install release "7.6.03.09" over existing "7.6.5.9"
    MSG: update test: installed release newer
    MSG:  update from "7.6.5.9" to "7.6.03.09" not allowed
    STDERR: cannot downgrade package
    STDOUT: skipping package
    STDOUT:
    starting preparing phase of package Loader 7.6.03.09 32 bit
    STDOUT: -
    WRN: try to install release "7.6.03.09" over existing "7.6.5.9"
    MSG: update test: installed release newer
    MSG:  update from "7.6.5.9" to "7.6.03.09" not allowed
    STDERR: cannot downgrade package
    STDOUT: skipping package
    STDOUT:
    starting preparing phase of package Messages MSG 0.5603
    STDOUT: -
    STDERR: cannot downgrade package
    STDOUT: skipping package
    STDOUT:
    starting preparing phase of package ODBC 7.6.03.09 32 bit
    STDOUT: -
    WRN: try to install release "7.6.03.09" over existing "7.6.5.9"
    MSG: update test: installed release newer
    MSG:  update from "7.6.5.9" to "7.6.03.09" not allowed
    STDERR: cannot downgrade package
    STDOUT: skipping package
    STDOUT: checking filesystem "C:"... free disk space ok
    MSG: available = 127248680 kb
    MSG: needed = 339145 kb
    STDOUT:
    starting installation phase of package Base 7.6.03.09 32 bit
    STDOUT: -
    STDERR: ERR: InstallRegistry::newPackage(): can't add Package "Base" -> "c:/sapdb/programs": already exists!
    STDERR: installation exited abnormally  at Fr, Apr 10, 2009 at 10:05:29MSG: packagedata of package SQLDBC not changed
    MSG: packagedata of package DB Analyzer not changed
    MSG: packagedata of package JDBC not changed
    MSG: packagedata of package Server Utilities not changed
    MSG: packagedata of package Redist Python not changed
    MSG: packagedata of package Loader not changed
    MSG: packagedata of package Messages not changed
    MSG: packagedata of package ODBC not changed
    MSG: writing 12 packages
    MSG: net install registry size = 121301 bytes
    MSG: wrote install registry (141250 bytes)
    MSG: install registry successfully unlocked

  • Error installing E-Bussiness Suite (EBS) R12 on Windows 2003 Server x32

    I am trying to install EBS R12 and i am getting error at stage 3 of 5 on 53%
    I followed steps from below link
    http://supportuae.wordpress.com/2013/01/26/installing-oracle-e-business-suite-r12-on-microsoft-windows-server-2003/
    My Setup
    Win 2003 Server SP2 x32 *(Installed in D:\) 20 GB*
    MS Visual C++ Express edition *(D:\MSVS)*
    Cygwin 1.7 *(D:\cygwin)*
    Acive Perl
    Oracle Apps Dump at G:\
    Installing Oracle Apps at E:\ with 270 GB NTFS
    Installed in Administrator Login
    Below is my Error log
    ~~~~~~~~~~~~~
    Processing DriverFile = G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\template\adriapps.drv
    Running Instantiation Drivers for G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\template\adriapps.drv
    instantiate file:
    source : G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\template\adrunias.cmd
    dest : E:\oracle\VIS\inst\apps\VIS_ebs\temp\adrunias.cmd
    backup : E:\oracle\VIS\inst\apps\VIS_ebs\temp\adrunias.cmd to E:\oracle\VIS\apps\apps_st\appl\admin\VIS_ebs\out\templbac\adrunias.cmd
    instantiate file:
    source : G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\template\adrunat.cmd
    dest : E:\oracle\VIS\inst\apps\VIS_ebs\temp\adrunat.cmd
    backup : E:\oracle\VIS\inst\apps\VIS_ebs\temp\adrunat.cmd to E:\oracle\VIS\apps\apps_st\appl\admin\VIS_ebs\out\templbac\adrunat.cmd
    Step 0 of 5
    Command: E:\oracle\VIS\inst\apps\VIS_ebs\temp\adrunias.cmd
    Processing Step 3 of 5
    Executing: E:\oracle\VIS\inst\apps\VIS_ebs\temp\adrunias.cmd
    G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>REM
    G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>REM $Header: adrunias.cmd 120.11 2009/01/19 06:29:11 marderiu noship $
    G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>REM ###############################################################
    G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>REM
    G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>REM This file is automatically generated by AutoConfig. It will be read and
    G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>REM overwritten. If you were instructed to edit this file, or if you are not
    G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>REM able to use the settings created by AutoConfig, refer to Metalink Note
    G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>REM 387859.1 for assistance.
    G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>REM
    G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>REM ###############################################################
    G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>REM
    G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>FOR /F "delims==" %a IN ('DATE /T') DO (set date=%a )
    G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>(set date=Sun 04/21/2013 )
    G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>FOR /F "delims==" %a IN ('TIME /T') DO (set time=%a )
    G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>(set time=03:12 PM )
    G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>ECHO STARTED INSTALL PHASE : APPS TECH STACK : Sun 04/21/2013 03:12 PM
    STARTED INSTALL PHASE : APPS TECH STACK : Sun 04/21/2013 03:12 PM
    G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>SET JRE_PATH=G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jre\NT\1.6.0\bin\java
    G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>SET JRE_CP=.;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\java;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\xmlparserv2.jar;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\ojdbc14.jar;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\oui\OraInstaller.jar;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\oui\ewt3.jar;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\oui\share.jar;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\oui\srvm.jar
    G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>SET XML_FILE=E:\oracle\VIS\inst\apps\VIS_ebs\appl\admin\VIS_ebs.xml
    G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>SET PATH=G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\unzip\NT;D:\Perl\site\bin;D:\Perl\bin;D:\WINDOWS\system32;D:\WINDOWS;D:\WINDOWS\System32\Wbem;D:\MSVS\VC\bin;D:\cygwin\bin
    G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>SET EC=ERRORCODE
    G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>setlocal enableextensions
    G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>set /P unpw=""
    G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>for /F "usebackq tokens=1,2 delims=/" %i in ('APPS/APPS') do set APPSUSER=%i && set APPSPASS=%j
    G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>set APPSUSER=APPS && set APPSPASS=APPS
    G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>IF "5" == "1" (SET THREADS=1 ) ELSE (SET THREADS=4 )
    G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>CD /D D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp
    D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>if "FALSE" == "E:\oracle\VIS\inst\apps\VIS_ebs\temp\adrunias.cmd" (if not "FALSE" == "FALSE" (goto :FALSE ) else (goto :runProcess_1 ) )
    D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>echo "runProcess_1"
    "runProcess_1"
    D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>REM
    D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>REM Perform the install for tech stack
    D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>REM
    D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>echo Statusstring Installing Applications Technology Stack
    Statusstring Installing Applications Technology Stack
    D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jre\NT\1.6.0\bin\java -mx600M -classpath .;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\java;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\xmlparserv2.jar;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\ojdbc14.jar;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\oui\OraInstaller.jar;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\oui\ewt3.jar;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\oui\share.jar;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\oui\srvm.jar oracle.apps.ad.rapidwiz.util.InstantiateFile -e E:\oracle\VIS\inst\apps\VIS_ebs\appl\admin\VIS_ebs.xml -d G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\driver\appsts\driver\gias.drv -pwd no_password_here -log E:\oracle\VIS\apps\apps_st\appl\admin\VIS_ebs\log\ApplyAppsTechStack.log -nthreads 4 -verbose
    Enter the location of the CD labeled Oracle Applications Rapid Install - Tools Disk 1 :
    Checking Disk contents in - G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz
    Checking Disk contents in - G:\Oracle_Apps\StagesR12\oraAS\Disk1
    Checking Disk contents in - G:\Oracle_Apps\StagesR12\oraAS\Disk1
    Unzip Count:60
    Processing Disk1....
    Processing Disk2....
    Processing Disk3....
    D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>if 0 == 0 goto :BITS_OK
    D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>echo "runProcess_2"
    "runProcess_2"
    D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>REM Perform the registration for tech stack
    D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>REM
    D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>echo Statusstring Registering Applications Technology Stack
    Statusstring Registering Applications Technology Stack
    D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>(echo APPS & echo APPS ) | G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jre\NT\1.6.0\bin\java -mx512M -classpath .;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\java;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\xmlparserv2.jar;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\ojdbc14.jar;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\oui\OraInstaller.jar;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\oui\ewt3.jar;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\oui\share.jar;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\oui\srvm.jar oracle.apps.ad.clone.ApplyAppsTechStack -e E:\oracle\VIS\inst\apps\VIS_ebs\appl\admin\VIS_ebs.xml -stage G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz -showProgress -phase reg -nopromptmsg
    Log file located at E:\oracle\VIS\inst\apps\VIS_ebs\admin\log\ApplyAppsTechStack_04211520.log
    | 0% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed RC-50004: Fatal: Error occurred in ApplyAppsTechStack:
    RC-50013: Fatal: Failed to instantiate driver E:\oracle\VIS\apps\tech_st\10.1.3\appsutil\driver\regclone.drv
    D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>if 1 == 0 goto :REG_OK
    D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>echo Cannot execute registration of Applications Techstack
    Cannot execute registration of Applications Techstack
    D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>if "" == "TRUE" goto :INSIAS_OK
    RW-50010: Error: - script has returned an error: 1
    RW-50004: Error code received when running external process. Check log file for details.
    Running APPL_TOP Install Driver for VIS instance
    Please refer to the remaining logs on applications node at - E:\oracle\VIS\inst\apps\VIS_ebs\logs\04211310.log
    Processing DriverFile = G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\template\adriapps.drv
    Running Instantiation Drivers for G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\template\adriapps.drv
    instantiate file:
    source : G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\template\adrunias.cmd
    dest : E:\oracle\VIS\inst\apps\VIS_ebs\temp\adrunias.cmd
    backup : E:\oracle\VIS\inst\apps\VIS_ebs\temp\adrunias.cmd to E:\oracle\VIS\apps\apps_st\appl\admin\VIS_ebs\out\templbac\adrunias.cmd
    instantiate file:
    source : G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\template\adrunat.cmd
    dest : E:\oracle\VIS\inst\apps\VIS_ebs\temp\adrunat.cmd
    backup : E:\oracle\VIS\inst\apps\VIS_ebs\temp\adrunat.cmd to E:\oracle\VIS\apps\apps_st\appl\admin\VIS_ebs\out\templbac\adrunat.cmd
    Step 0 of 5
    Command: E:\oracle\VIS\inst\apps\VIS_ebs\temp\adrunias.cmd
    Processing Step 3 of 5
    Executing: E:\oracle\VIS\inst\apps\VIS_ebs\temp\adrunias.cmd
    G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>REM
    G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>REM $Header: adrunias.cmd 120.11 2009/01/19 06:29:11 marderiu noship $
    G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>REM ###############################################################
    G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>REM
    G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>REM This file is automatically generated by AutoConfig. It will be read and
    G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>REM overwritten. If you were instructed to edit this file, or if you are not
    G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>REM able to use the settings created by AutoConfig, refer to Metalink Note
    G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>REM 387859.1 for assistance.
    G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>REM
    G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>REM ###############################################################
    G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>REM
    G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>FOR /F "delims==" %a IN ('DATE /T') DO (set date=%a )
    G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>(set date=Sun 04/21/2013 )
    G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>FOR /F "delims==" %a IN ('TIME /T') DO (set time=%a )
    G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>(set time=04:30 PM )
    G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>ECHO STARTED INSTALL PHASE : APPS TECH STACK : Sun 04/21/2013 04:30 PM
    STARTED INSTALL PHASE : APPS TECH STACK : Sun 04/21/2013 04:30 PM
    G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>SET JRE_PATH=G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jre\NT\1.6.0\bin\java
    G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>SET JRE_CP=.;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\java;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\xmlparserv2.jar;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\ojdbc14.jar;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\oui\OraInstaller.jar;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\oui\ewt3.jar;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\oui\share.jar;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\oui\srvm.jar
    G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>SET XML_FILE=E:\oracle\VIS\inst\apps\VIS_ebs\appl\admin\VIS_ebs.xml
    G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>SET PATH=G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\unzip\NT;D:\Perl\site\bin;D:\Perl\bin;D:\WINDOWS\system32;D:\WINDOWS;D:\WINDOWS\System32\Wbem;D:\MSVS\VC\bin;D:\cygwin\bin
    G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>SET EC=ERRORCODE
    G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>setlocal enableextensions
    G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>set /P unpw=""
    G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>for /F "usebackq tokens=1,2 delims=/" %i in ('APPS/APPS') do set APPSUSER=%i && set APPSPASS=%j
    G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>set APPSUSER=APPS && set APPSPASS=APPS
    G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>IF "5" == "1" (SET THREADS=1 ) ELSE (SET THREADS=4 )
    G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>CD /D D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp
    D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>if "E:\oracle\VIS\inst\apps\VIS_ebs\temp\adrunias.cmd" == "E:\oracle\VIS\inst\apps\VIS_ebs\temp\adrunias.cmd" (if not ""runProcess_2"" == "FALSE" (goto :"runProcess_2" ) else (goto :runProcess_1 ) )
    RW-50010: Error: - script has returned an error: 1
    RW-50004: Error code received when running external process. Check log file for details.
    Running APPL_TOP Install Driver for VIS instance
    Please refer to the remaining logs on applications node at - E:\oracle\VIS\inst\apps\VIS_ebs\logs\04211310.log

    which version of Oracle R12 ?
    these are generic errors, please check log file for details and post here error log
    and also ensure that you are following proper guidelines mentioned in MOS note:
    Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Microsoft Windows Server (32-bit) [ID 761567.1]
    i am using Oracle E-Business Suite Release 12.1.1 Media Pack for Microsoft Windows (32-bit)
    i have already posted complete log from E:\oracle\VIS\inst\apps\VIS_ebs\logs\04211310.log
    Can you post link to guidelines mentioned in MOS note:
    Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Microsoft Windows Server (32-bit) [ID 761567.1]

  • Error installing rescue and recovery 4.3 on windows 7

    i have a sl410 with windows 7 ultimate(32bit) installed, but i failed to install  rescue and recovery 4.3 for many times,reporting"Error 25014. There was an error installing the Rescue and Recovery boot manager. Return code: 6".
    why?
    i found someone said about using a command line installation which will NOT install the RnR partition,but how to use  command line installation?i've got only the tvtvrnr43_1027sc.exe downloaded file and the tvtrnr43_1027.exe in C:\SWTOOLS\apps\rnr43sc\ directory,how can i input the comands like setup.exe /a /s?which command should i use?

    http://forum.lenovo.com/t5/ThinkVantage-Technologies/Rescue-and-Recovery-4-3-for-Windows-7-installat...

Maybe you are looking for

  • Permission error

    I'm at a complete loss here. I cannot get the TS finish properly. I get this error after it finishing applying the WIM: Installation of image 1 in package PS100117 failed to complete.. Permissions on the requested may be configured incorrectly.Access

  • Prevent viewing of source files - security-constraint

    I'm using JSF and Facelets and I'd like to restrict visibility of the .xhtml source files. Currently if a user types in the source file name index.xhtml instead of index.jsf in the url they get presented with the raw source file. I've got a blanket s

  • HT1677 How do I put a parental lock on safari on the ipad2?

    I would like to put parental locks on Safari on the iPad2 so I can control what my children are viewing.  How do I do that?

  • Ant - Create Connection Pool on WebLogic 10.1.3

    Hi, I have created the following build.xml file to create a Datasource on weblogic using ANT . The file is as follows: <?xml version="1.0" encoding="windows-1252" ?> <project name="deploy" default="all" basedir=".">   <property file="build.properties

  • Start Delta IP Only If Data Is Available

    Hi together, We have an InfoPackage, that delivers data using a DataSource in Delta-Mode. Unfortunately the InfoPackage only sporadically delivers data, mostly it returns zero records. Our question is now, how to find out, whether data is available a