Error installing Weblogic 1033 on Windos 2008 R2

We are trying to install the latest soasuite (11gR1) on Windows 2008R2 (which is a VM because it is our first test with this version)
So we set up a database and installed a very recent java (jdk-6u22-windows-x64)
So far so good.
Then when starting the installer uysing "java -jar installer.jar" it immediately bails out with:
Exception in thread "winRegistry" java.lang.UnsatisfiedLinkError: Expecting an absolute path of the library: jni_winx64
The only reference in metalink is to an issue when an jar was unzipped before installing. But this version is delivered as a jar file so that seems not relevant.
Found the requested file in the "native" subdirectory, so copied it to directory where the installer.jar resides and tried again.
Now the installer starts and i can go through several installer screens but after the screen about Middelware Home Directory and Product Installation Directories when i hit Next it shows a box with "A fatal error has occured. This application will terminate" and then the installer quits.
No java exception is shown and i can't find any logfile of windows eventlog entry which might give some detail on the problem.
I tried several combinations for starting the installer up until:
"c:\Program Files\Java\bin\java.exe" -D64 -Xms1024m -Xmx1024m -jar installer.jar
Does anyone have any ideas on this?
Thanks in advance.

I found that the file available for download from OTN was named wls1033_generic.zip. Once downloaded simply rename this to wls1033_generic.jar and then follow the Oracle instructions.
Took me a while to figure that one out. It would be helpful if you could just download it as a jar or if the download page made it clear that the file needs to be renamed.
Edited by: 827972 on 13-Jan-2011 08:20

Similar Messages

Oralce EPM Fails to install Weblogic on Windows Server 2008 R2 x64

I've run the installer on Windows Server 2008 R2 x64 and it fails to install Weblogic. I don't have MIDDLEWARE_HOME/oracle_common. Config tool log says missing jars. When I go back to install and choose products individually, Weblogic Server is gray. When I click on Weblogic Server, the message at the bottom says can not be installed.
I have checked that I have extracted the following assemblies:
Oracle Hyperion Enterprise Performance Management System Installer, Fusion Edition Release 11.1.2.0.0
Hyperion Enterprise Performance Management System Foundation Services Release 11.1.2.0.0 - Parts 1 - 4
Oracle Hyperion Enterprise Performance Management System Additional Content Release 11.1.2.0.0
I have run this same set of files on another server and Weblogic was installed. Am I missing something?

I am not sure if it is your problem but I don't think R2 is officially supported, I did have problems with it when I first installed 11.1.2 so I installed with R1 SP2.
Cheers
John
http://john-goodwin.blogspot.com/

Error Installing Print Driver on Windows 2008 Server R2

I am getting an error installing the Xerox Print driver on Windows 2008 R2. Here is the event viewer detail. Any ideas?
Log Name: Microsoft-Windows-PrintService/Admin
Source: Microsoft-Windows-PrintService
Date: 06/24/2014 10:47:11 AM
Event ID: 215
Task Category: Installing a printer driver
Level: Error
Keywords: Printer Setup,Printer
User: SYSTEM
Computer: IHE-DEV8NEW-11V.Americas.mittalco.com
Description:
Installing printer driver Xerox ColorQube 9303 PS failed, error code 0x0, HRESULT 0x80070705. See the event user data for context information.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-PrintService" Guid="{747EF6FD-E535-4D16-B510-42C90F6873A1}" />
<EventID>215</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>19</Task>
<Opcode>12</Opcode>
<Keywords>0x8000000000000220</Keywords>
<TimeCreated SystemTime="2014-06-24T15:47:11.407265800Z" />
<EventRecordID>82</EventRecordID>
<Correlation />
<Execution ProcessID="1124" ThreadID="3836" />
<Channel>Microsoft-Windows-PrintService/Admin</Channel>
<Computer>IHE-DEV8NEW-11V.Americas.mittalco.com</Computer>
<Security UserID="S-1-5-18" />
</System>
<UserData>
<SetupInstallPrinterDriver xmlns:auto-ns3="http://schemas.microsoft.com/win/2004/08/events" xmlns="http://manifests.microsoft.com/win/2005/08/windows/printing/spooler/core/events">
<Label>InternalInstallPrinterDriverFromPackage</Label>
<Message>pfnPSetupParseInfAndCommitFileQueue failed</Message>
<AdditionalInfo>-</AdditionalInfo>
<InfPath>-</InfPath>
<DriverName>Xerox ColorQube 9303 PS</DriverName>
<InstallSection>-</InstallSection>
<ProcessorArchitecture>Windows x64</ProcessorArchitecture>
<PackageAware>Not package aware</PackageAware>
<CoreDriverDependencies>-</CoreDriverDependencies>
<LastError>0x0</LastError>
<HResult>0x80070705</HResult>
</SetupInstallPrinterDriver>
</UserData>
</Event>
Ray Pietrzak

Hi Ray,
On current situation, please refer to the following KB and check if set
Point and Print Restrictions policy to Disabled. Then monitor the result.
Event ID's commonly associated with point and print
restrictions
In addition, I noticed that there was a thread which you created one year ago. It seems to be similar with
current issue. However, please have a look.
Windows
2008 Server
If I misunderstand, please don’t hesitate to let me know.
Hope this helps.
Best regards,
Justin Gu

Insufficient Disk-space Error Installing WebLogic 1033_generic on Mac

How do I resolve this "Insufficient Disk-space Error" message I get while installing WLS1033? I thought I have more than enough disk-space on my system to handle just about any application software size out there. i mean, beside the 937.72 gigs of available disk-space on my system, I also have roughly 240 gigs external drive space. The system runs on 8 gigs of RAM. I know I am doing something wrong; just can't figure out what. I am new at WebLogic and so any help from the community is highly appreciated. Someone please help.
sbliss

Al
I got this error: "Unable to access jarfile wls1033_generic.jar" when I enter "java -Dos.name=unix -jar wls1033_generic.jar" in the Terminal command line. I very am frustrated. Please help me. Please advise.
One question: Is anybody able to install webLogic? I am just curious.
sbliss

Error installing weblogic 10.3.6

hi am having this error when installing weblogic on my window 7 32 bit
the error happen when i just double click the .exe file
i have download the file using fire fox
error is
could not obtain archive information since it is corrupted.Error code=9

User,
Try to download Generic File (Jar) instead of exe file.
Then install using "java".
java -jar <jar-name>
This should work.

Installing on VMWare image Windos 2008

Hi everybody,
We are planning to install the Service Registry 11gR1 (11.1.1.0) with Weblogic on a VMWare machine (Windows , either 2008 or 2003).
Did anyone try this before ? Is this working or is it challenging / impossible ?
Many thanks,
CL

Nikil,
Which version on RHEL you are going to use and which version of VMWARE you as planning to install...
If you google around , you can find a lots of notes on vmware and oracle installation.
See this link...
http://www.brainsurface.com/images/stories/oracleraconvm/twonoderacinstallation1-20110727211925.pdf

CFGFWK-60850 Error while installing weblogic portal 10.3.5

I am getting below error while installing weblogic portal 10.3.5 configuration wizard for creating domain. Please help me resolve this issue.
OS: Windows 2008 64 bit
Installable file: portal103_generic.jar
This is the first weblogic installation.
Installtion command applied: java -d64 -jar portal103_generic.jar
Test JDBC data sources.
Data Source=cgDataSource
Driver=org.apache.derby.jdbc.ClientDriver
URL=jdbc:derby://localhost:1527/weblogic_eval;create=true;ServerName=localhost;databaseName=weblogic_eval
User=WEBLOGIC
Password=********
SQL Test=SELECT COUNT(*) FROM SYS.SYSTABLES
java.net.ConnectException : Error connecting to server localhost on port 1527 with message Connection refused: connect.
CFGFWK-60850: Test Failed!
Data Source=cgDataSource-nonXA
Driver=org.apache.derby.jdbc.ClientDriver
URL=jdbc:derby://localhost:1527/weblogic_eval;create=true;ServerName=localhost;databaseName=weblogic_eval
User=WEBLOGIC
Password=********
SQL Test=SELECT COUNT(*) FROM SYS.SYSTABLES
java.net.ConnectException : Error connecting to server localhost on port 1527 with message Connection refused: connect.
CFGFWK-60850: Test Failed!
Data Source=p13nDataSource
Driver=org.apache.derby.jdbc.ClientDriver
URL=jdbc:derby://localhost:1527/weblogic_eval;create=true;ServerName=localhost;databaseName=weblogic_eval
User=WEBLOGIC
Password=********
SQL Test=SELECT COUNT(*) FROM SYS.SYSTABLES
java.net.ConnectException : Error connecting to server localhost on port 1527 with message Connection refused: connect.
CFGFWK-60850: Test Failed!
Data Source=portalDataSource
Driver=org.apache.derby.jdbc.ClientDriver
URL=jdbc:derby://localhost:1527/weblogic_eval;create=true;ServerName=localhost;databaseName=weblogic_eval
User=WEBLOGIC
Password=********
SQL Test=SELECT COUNT(*) FROM SYS.SYSTABLES
java.net.ConnectException : Error connecting to server localhost on port 1527 with message Connection refused: connect.
CFGFWK-60850: Test Failed!
Data Source=portalDataSourceAlwaysXA
Driver=org.apache.derby.jdbc.ClientDriver
URL=jdbc:derby://localhost:1527/weblogic_eval;create=true;ServerName=localhost;databaseName=weblogic_eval
User=WEBLOGIC
Password=********
SQL Test=SELECT COUNT(*) FROM SYS.SYSTABLES
java.net.ConnectException : Error connecting to server localhost on port 1527 with message Connection refused: connect.
CFGFWK-60850: Test Failed!
Data Source=portalDataSourceNeverXA
Driver=org.apache.derby.jdbc.ClientDriver
URL=jdbc:derby://localhost:1527/weblogic_eval;create=true;ServerName=localhost;databaseName=weblogic_eval
User=WEBLOGIC
Password=********
SQL Test=SELECT COUNT(*) FROM SYS.SYSTABLES
java.net.ConnectException : Error connecting to server localhost on port 1527 with message Connection refused: connect.
CFGFWK-60850: Test Failed!
Why I am getting this error ? How can i resolve this ?
Edited by: Prajeesh Kumar KM on Feb 25, 2013 12:26 AM

I'm getting this error as well.
Did you resolve this problem?

Error Installing SQL Server Express 2008: '' is not a valid login or you do not have permission.

I have tried installing SQL Server 2008 multiple times on my machine, and I always receive this error about 3/4 of the way through: '' is not a valid login or you do not have permission.
I have tried installing both SQL Server Express 2008 with Tools and SQL Server Express 2008 with Advanced Services, and they both fail the same way. I am trying to do a new stand-alone installation.
I'm running Windows XP Home Edition SP3.
Looking into the error, some forums say I have to install it from THE Administrator account, and not an account with administrator permissions; it also cannot be in Safe Mode, because then the Windows Installer won't work. Unfortunately, I haven't been able to login to the Administrator account. I can go to the home login screen, do ctrl+alt+del twice, and attempt to login to the Administrator account, but I receive this error: Unable to Log You on because of an Account Restriction.
Other forums say that in the Server Configuration section, all you have to do is provide the username and a strong password from an administrative account on the computer, and it doesn't have to be THE Administrator. Well, I did that, but for some reason it doesn't recognize my username and password, it says something like "The credentials you provided for the SQL Server Agent are invalid". BUT THOSE ARE THE CORRECT CREDENTIALS FOR MY ADMINISTRATIVE USER! So I'm forced to use one of the accounts without a password, like NT AUTHORITY\SYSTEM. That's the only way I can get past this step.
Also, just FYI, on the next step, which is Database Engine Configuration, I am using Mixed Mode for the Security Mode. I AGAIN provide a password, and then add my current user (who IS an administrator on my machine!) to the SQL Server Administrators box.
But yet, it fails every single time.
This is pathetic and ridiculous. I must have tried to install this thing 15 times, that is not an exaggeration. I'm posting this on several other forums as well, maybe an MVP or Bill Gates himself can help me.
I have one of the log files from a failed installation. If someone would like to see it, I will post it.

Papy Normand wrote:
Hello,
Please, could you have a look on the excellent answer of Mike Wachal you will find here :
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=4160294&SiteID=1
Don't hesitate to post again for more help or explanations
Have a nice day
PS : if you are talking about the Sql Server Agent Service, it is disabled for Sql Server Express. It is enabled only for the Workgroup/Standard/Dev and Entreprise Editions
Sorry, but I've tried the suggestion in that link, and it hasn't helped me.
For anyone wonder, the link is talking about the problem in Server Configuration where I enter my Windows user account and password (which is in the Administrative group), but it says the credentials are invalid. The link suggests that you need to either enter your Windows account (which I did, and it wouldn't let me go to the next step), or to use one of the built in accounts (which I also tried, but it gave me the " '' is not a valid login" error during the installation).
Any other ideas?
I haven't had any answers from any other forums either, so I'll just post my log file in case anyone wants to look at this:
Overall summary:
Final result:                  SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup.
Exit code (Decimal):           -2068643839
Exit facility code:            1203
Exit error code:               1
Exit message:                  SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup.
Start time:                    2008-11-17 11:13:47
End time:                      2008-11-17 12:17:25
Requested action:              Install
Log with failure:              C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20081117_110917\Detail.txt
Exception help link:           http%3a%2f%2fgo.microsoft.com%2ffwlink%3fLinkId%3d20476%26ProdName%3dMicrosoft%2bSQL%2bServer%26EvtSrc%3dsetup.rll%26EvtID%3d50000%26ProdVer%3d10.0.1600.22%26EvtType%3d0xBE029E38%400x12C2466D
Machine Properties:
Machine name:                  STEVEN
Machine processor count:       2
OS version:                    Windows XP
OS service pack:               Service Pack 3
OS region:                     United States
OS language:                   English (United States)
OS architecture:               x86
Process architecture:          32 Bit
OS clustered:                  No
Product features discovered:
Product              Instance             Instance ID                    Feature                                  Language             Edition              Version         Clustered
Package properties:
Description:                   SQL Server Database Services 2008
SQLProductFamilyCode:          {628F8F38-600E-493D-9946-F4178F20A8A9}
ProductName:                   SQL2008
Type:                          RTM
Version:                       10
SPLevel:                       0
Installation location:         D:\x86\setup\
Installation edition:          DEVELOPER
User Input Settings:
ACTION:                        Install
ADDCURRENTUSERASSQLADMIN:      False
AGTSVCACCOUNT:                 NT AUTHORITY\SYSTEM
AGTSVCPASSWORD:                *****
AGTSVCSTARTUPTYPE:             Manual
ASBACKUPDIR:                   C:\Program Files\Microsoft SQL Server\MSAS10.MSSQLSERVER\OLAP\Backup
ASCOLLATION:                   Latin1_General_CI_AS
ASCONFIGDIR:                   C:\Program Files\Microsoft SQL Server\MSAS10.MSSQLSERVER\OLAP\Config
ASDATADIR:                     C:\Program Files\Microsoft SQL Server\MSAS10.MSSQLSERVER\OLAP\Data
ASDOMAINGROUP:                 <empty>
ASLOGDIR:                      C:\Program Files\Microsoft SQL Server\MSAS10.MSSQLSERVER\OLAP\Log
ASPROVIDERMSOLAP:              1
ASSVCACCOUNT:                  NT AUTHORITY\SYSTEM
ASSVCPASSWORD:                 *****
ASSVCSTARTUPTYPE:              Automatic
ASSYSADMINACCOUNTS:            STEVEN\Steven
ASTEMPDIR:                     C:\Program Files\Microsoft SQL Server\MSAS10.MSSQLSERVER\OLAP\Temp
BROWSERSVCSTARTUPTYPE:         Disabled
CONFIGURATIONFILE:             C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20081117_110917\ConfigurationFile.ini
ENABLERANU:                    False
ERRORREPORTING:                False
FEATURES:                      SQLENGINE,REPLICATION,FULLTEXT,AS,RS,BIDS,CONN,IS,BC,SDK,BOL,SSMS,ADV_SSMS,SNAC_SDK,OCS
FILESTREAMLEVEL:               0
FILESTREAMSHARENAME:           <empty>
FTSVCACCOUNT:                  NT AUTHORITY\LOCAL SERVICE
FTSVCPASSWORD:                 *****
HELP:                          False
INDICATEPROGRESS:              False
INSTALLSHAREDDIR:              C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR:           C:\Program Files\Microsoft SQL Server\
INSTALLSQLDATADIR:             <empty>
INSTANCEDIR:                   C:\Program Files\Microsoft SQL Server\
INSTANCEID:                    MSSQLSERVER
INSTANCENAME:                  MSSQLSERVER
ISSVCACCOUNT:                  NT AUTHORITY\SYSTEM
ISSVCPASSWORD:                 *****
ISSVCSTARTUPTYPE:              Automatic
MEDIASOURCE:                   D:\
NPENABLED:                     0
PID:                           *****
QUIET:                         False
QUIETSIMPLE:                   False
RSINSTALLMODE:                 DefaultNativeMode
RSSVCACCOUNT:                  NT AUTHORITY\SYSTEM
RSSVCPASSWORD:                 *****
RSSVCSTARTUPTYPE:              Automatic
SAPWD:                         *****
SECURITYMODE:                  SQL
SQLBACKUPDIR:                  <empty>
SQLCOLLATION:                  SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT:                 NT AUTHORITY\SYSTEM
SQLSVCPASSWORD:                *****
SQLSVCSTARTUPTYPE:             Automatic
SQLSYSADMINACCOUNTS:           STEVEN\Steven
SQLTEMPDBDIR:                  <empty>
SQLTEMPDBLOGDIR:               <empty>
SQLUSERDBDIR:                  <empty>
SQLUSERDBLOGDIR:               <empty>
SQMREPORTING:                  False
TCPENABLED:                    0
X86:                           False
Configuration file:            C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20081117_110917\ConfigurationFile.ini
Detailed results:
Feature:                       Database Engine Services
Status:                        Failed: see logs for details
MSI status:                    Passed
Configuration status:          Failed: see details below
Configuration error code:      0x12C2466D
Configuration error description: '' is not a valid login or you do not have permission.
Configuration log:             C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20081117_110917\Detail.txt
Feature:                       SQL Client Connectivity SDK
Status:                        Passed
MSI status:                    Passed
Configuration status:          Passed
Feature:                       SQL Server Replication
Status:                        Failed: see logs for details
MSI status:                    Passed
Configuration status:          Failed: see details below
Configuration error code:      0x12C2466D
Configuration error description: '' is not a valid login or you do not have permission.
Configuration log:             C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20081117_110917\Detail.txt
Feature:                       Full-Text Search
Status:                        Failed: see logs for details
MSI status:                    Passed
Configuration status:          Failed: see details below
Configuration error code:      0x12C2466D
Configuration error description: '' is not a valid login or you do not have permission.
Configuration log:             C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20081117_110917\Detail.txt
Feature:                       Analysis Services
Status:                        Passed
MSI status:                    Passed
Configuration status:          Passed
Feature:                       Reporting Services
Status:                        Failed: see logs for details
MSI status:                    Passed
Configuration status:          Failed: see details below
Configuration error code:      0x12C2466D
Configuration error description: '' is not a valid login or you do not have permission.
Configuration log:             C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20081117_110917\Detail.txt
Feature:                       Integration Services
Status:                        Passed
MSI status:                    Passed
Configuration status:          Passed
Feature:                       Client Tools Connectivity
Status:                        Passed
MSI status:                    Passed
Configuration status:          Passed
Feature:                       Management Tools - Complete
Status:                        Passed
MSI status:                    Passed
Configuration status:          Passed
Feature:                       Management Tools - Basic
Status:                        Passed
MSI status:                    Passed
Configuration status:          Passed
Feature:                       Client Tools SDK
Status:                        Passed
MSI status:                    Passed
Configuration status:          Passed
Feature:                       Client Tools Backwards Compatibility
Status:                        Passed
MSI status:                    Passed
Configuration status:          Passed
Feature:                       Business Intelligence Development Studio
Status:                        Passed
MSI status:                    Passed
Configuration status:          Passed
Feature:                       SQL Server Books Online
Status:                        Passed
MSI status:                    Passed
Configuration status:          Passed
Feature:                       Microsoft Sync Framework
Status:                        Passed
MSI status:                    Passed
Configuration status:          Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file:               C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20081117_110917\SystemConfigurationCheck_Report.htm

Error while installing weblogic portal

I am getting the following error while installing weblogic portal 10.3.2 generic.jar on existing weblogic server 10.3.2 generic.jar installation on RHEL5 with jrockit mission control 3.1.2 as jdk.
java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:616)
at com.bea.plateng.common.ui.console.DelegateConsoleWidget.invokeWidgetCallback(DelegateConsoleWidget.java:200)
at com.bea.plateng.wizard.console.tasks.ConsoleInteractTask2.onLeave(ConsoleInteractTask2.java:439)
at com.bea.plateng.wizard.console.tasks.ConsoleInteractTask2.okNext(ConsoleInteractTask2.java:361)
at com.bea.plateng.wizard.WizardController.nextTask(WizardController.java:642)
at com.bea.plateng.wizard.WizardController.run(WizardController.java:519)
at java.lang.Thread.run(Thread.java:636)
Caused by: java.lang.NullPointerException
at java.io.File.<init>(File.java:239)
at com.bea.plateng.wizard.installer.diskspace.TempDir.<init>(TempDir.java:55)
at com.bea.plateng.wizard.installer.diskspace.TempDir.getInstance(TempDir.java:41)
at com.bea.plateng.wizard.installer.helpers.DiskSpaceHelper.checkDiscSpaceForProductInstallation(DiskSpaceHelper.java:255)
at com.bea.plateng.wizard.installer.helpers.ProductDirHelper.setStoreKeysAndValidateDiskSpace(ProductDirHelper.java:474)
at com.bea.plateng.wizard.installer.helpers.ProductDirHelper.validateAndSet(ProductDirHelper.java:278)
at com.bea.plateng.wizard.installer.console.tasks.ProductDirChooserConsoleTask.onLeave(ProductDirChooserConsoleTask.java:235)
... 10 more
anyone please help

I'm getting this error as well.
Did you resolve this problem?

Fetal error while installing weblogic server 12c on windows 64 bit

Dear all,
i have windows7 64bit, oracle 11g database, and my java version as i enter the JAVA -VERSION command at the cmd prompt is below
C:\Users\Administrator>java -version
java version "1.4.2_06"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_06-b03)
Java HotSpot(TM) Client VM (build 1.4.2_06-b03, mixed mode)i want to install weblogic server generic wls1211_generic.jar.
when i enter the command
java -Xmx1024m -jar wls1211_generic.jar
or
java -Xmx1206m -jar wls1211_generic.jar
it try to open the installation but give a fatal error like below
A fatal error occured, this application will terminate.
any idea?

Hi,
i did the same as you said, i.e i add this path to the PATH variable C:\Program Files (x86)\Java\jdk1.7.0
add the bin directory to this path, so you should have C:\Program Files (x86)\Java\jdk1.7.0\bintest it in the command prompt with java -version and it should prompt you java 1.7
also be sure the generic jar is not corrupted.
and one more thing you should use this command to install with generic jar:
java -jar wls1211_generic.jar
http://docs.oracle.com/cd/E24329_01/doc.1211/e24492/guimode.htm#autoId3
Regards
Carlos

Install weblogic 610 on solaris error

hi :
i am trying to install weblogic 610 pack 2 on solaris 2.8. when i start
with
sh weblogic610sp2_sol.bin -i console
the following error occurs:
Preparing to install...
Preparing CONSOLE Mode Installation...
============================================================================
===
Choose Locale...
1- English
CHOOSE LOCALE BY NUMBER: 1
============================================================================
===
WebLogic Server 6.1 (with sp2) (created with InstallAnywhere by Zero
G)
Invocation of this Java Application has caused an InvocationTargetException.
Thi
s application will now exit. (LAX)
Stack Trace:
java.lang.NullPointerException
at java.util.StringTokenizer.<init>(StringTokenizer.java:122)
at java.util.StringTokenizer.<init>(StringTokenizer.java:138)
at
com.zerog.ia.installer.steps.ChooseJavaVM.j([DashoPro-V1.2-120198])
at
com.zerog.ia.installer.steps.ChooseJavaVM.c([DashoPro-V1.2-120198])
at com.zerog.ia.installer.Main.a([DashoPro-V1.2-120198])
at com.zerog.ia.installer.Main.main([DashoPro-V1.2-120198])
at java.lang.reflect.Method.invoke(Native Method)
at com.zerog.lax.LAX.launch([DashoPro-V1.2-120198])
at com.zerog.lax.LAX.main([DashoPro-V1.2-120198])
GUI-
any idea?
thanks in advance!
daniel wang

Hi.
Try the following: make sure you have JDK 1.3.x installed and in your path
before you run the installation. I have seen similar problems when someone had
JDK 1.1.x in the path. You might also try running a silent installation
instead.
Regards,
Michael
daniel wang wrote:
hi :
i am trying to install weblogic 610 pack 2 on solaris 2.8. when i start
with
sh weblogic610sp2_sol.bin -i console
the following error occurs:
Preparing to install...
Preparing CONSOLE Mode Installation...
============================================================================
===
Choose Locale...
1- English
CHOOSE LOCALE BY NUMBER: 1
============================================================================
===
WebLogic Server 6.1 (with sp2) (created with InstallAnywhere by Zero
G)
Invocation of this Java Application has caused an InvocationTargetException.
Thi
s application will now exit. (LAX)
Stack Trace:
java.lang.NullPointerException
at java.util.StringTokenizer.<init>(StringTokenizer.java:122)
at java.util.StringTokenizer.<init>(StringTokenizer.java:138)
at
com.zerog.ia.installer.steps.ChooseJavaVM.j([DashoPro-V1.2-120198])
at
com.zerog.ia.installer.steps.ChooseJavaVM.c([DashoPro-V1.2-120198])
at com.zerog.ia.installer.Main.a([DashoPro-V1.2-120198])
at com.zerog.ia.installer.Main.main([DashoPro-V1.2-120198])
at java.lang.reflect.Method.invoke(Native Method)
at com.zerog.lax.LAX.launch([DashoPro-V1.2-120198])
at com.zerog.lax.LAX.main([DashoPro-V1.2-120198])
GUI-
any idea?
thanks in advance!
daniel wang--
Michael Young
Developer Relations Engineer
BEA Support

Error while installing weblogic 6.0

Hi,
I am trying to install weblogic 6.0 on Solaris SunOS 5.6 Ultrasparc-60
solaris VM 1.2.1. could someone help me in this.
Below is the result of my installation.
TIA
Arun.
# sh weblogic600_sol.bin -i console
Preparing to install...
Error: failed
/tmp/install.dir.17096/Solaris/resource/jre/jre/lib/sparc/client/libjvm.so,
because ld.so.1:
/tmp/install.dir.17096/Solaris/resource/jre/jre/bin/../bin/sparc/native_threads/java:
fatal: libCrun.so.1: open failed: No such file or directory

Mike,
Should i have to install jdk1.3 separately & run the installation. Is there
anyway i should specify the javahome for the weblogic installation.
Arun.
Michael Girdley wrote:
WebLogic 6.0 will install its own copy of the JDK using the install anywhere
wizard. WLS 6.0 requires JDK 1.3 to operate.
Michael Girdley, BEA Systems Inc
Learning WebLogic? Buy the book.
http://www.learnweblogic.com/
"Arun" <[email protected]> wrote in message
news:[email protected]..
Hi,
I am trying to install weblogic 6.0 on Solaris SunOS 5.6 Ultrasparc-60
solaris VM 1.2.1. could someone help me in this.
Below is the result of my installation.
TIA
Arun.
# sh weblogic600_sol.bin -i console
Preparing to install...
Error: failed
/tmp/install.dir.17096/Solaris/resource/jre/jre/lib/sparc/client/libjvm.so,
because ld.so.1:
/tmp/install.dir.17096/Solaris/resource/jre/jre/bin/../bin/sparc/native_thre
ads/java:
fatal: libCrun.so.1: open failed: No such file or directory

Installing Weblogic 12c on windows server 2008

Trouble installing Weblogic 12 on windows server 2008 ,i have oracle 11g databse in the same system.Now i am trying to install Oracle Weblogic 12 ,but WLS requires JDK 1.6 as a minimum ,after i install the Oracle11g database it automatically installed the Jdk 1.5 ..now how can i go about and install Weblogic 12 .

install JDK 6 or 7. Load the environment variables from CMD.EXE
set JAVA_HOME = RUTA_DEL_JDK_6_OR_7
set PATH =%JAVA_HOME%\BIN;% PATH%
Then, from the same terminal (cmd.exe) run the weblogic runInstaller.exe 12c.

Error installing sql server 2008 management studio express

Hello,
I need to install sql server 2008 management studio express on a sql server 2k8 R2 instance.
First of all, I've downloaded this one from this link: http://www.microsoft.com/en-us/download/details.aspx?id=7593 (for 32 bits).
Once I've the downloaded file I run this file and choose the first option (New sql server stand-alone...) in the installation part. Finally, in the installation type I choose the option 'Add features to an existing instance of SQL Server 2008' with the instance
selected. I push Next and then I get the following error: 'The instance ID is required but it is missing'.
Can anybody help me?
Thanks a lot.
Regards.

Hello,
What’s the edition of the SQL Server 2008 R2? If you had installed SQL Server 2008 R2 Developer edition, you should install “SQL Server 2008 Express with Tools” edition or “SQL Server 2008 Express with Advanced Services” edition.
Please refer to the following article for more information:
http://www.benlittler.com/2009/06/how-to-install-sql-management-studio-express-2008/
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support

Error while installing weblogic server

Dear all,
i have install oracle database 11g r2 64bit on windows 7 64bit.
i download weblogic server ofm_rcu_win32_11.1.1.3.3_disk1_1of1.
i want to install it, i run the rcu from C:\ofm_rcu_win32_11.1.1.3.3_disk1_1of1\rcuHome\BIN directory.
it give the following error
windows cannot find "C:download", make sure you type the name correctly.
why?

Hi Maahjoor,
this ofm_rcu_win32_11.1.1.3.3_disk1_1of1 is not the weblogic's installers, is RCU.
If you want to install Weblogic you don't need RCU, RCU has been made to create schemas which are needed for some types of installation like SOA suite, BI Publisher etc.
You can get Weblogic installer from this url:
http://www.oracle.com/technetwork/middleware/weblogic/downloads/wls-for-dev-1703574.html
To install Weblogic you only need a JDK 1.6 or a JRockit 1.6
Hope this clarify your doubt :)
Regards
Carlos

Error installing Weblogic 1033 on Windos 2008 R2

Similar Messages

Maybe you are looking for