Error installing Windows updates

I am unable to install the following Windows updates :
1. KB3023562
2. KB3004375
3. KB3031432
After I installed it, rebooted, it fails and reverts back. Error code : 8007054F. I also have downloaded the standalone installer but gets the same result. I am using Windows 7 Pro 64bit. Any help is appreciated.

Method 1:
Try installing the update manually in a clean boot state:
Place the computer in clean boot and check if the issue persists.
To help troubleshoot error messages and other issues, you can start Windows 7 by using a minimal set of drivers and startup programs. This kind of startup is known as a "clean boot." A clean boot helps eliminate software conflicts.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.microsoft.com/kb/929135
Note: After troubleshooting, make sure to put the computer to start as usual as mentioned in Step 7 from the above provided KB article.
Download link:
Update for Windows 7 (KB2732487)
http://www.microsoft.com/en-us/download/details.aspx?id=30625
Method 2:
Try performing SFC (System File Checker) scan on the computer.
Reference:
How to use the System File Checker tool to troubleshoot missing or corrupted system files on Windows Vista or on Windows 7
http://support.microsoft.com/kb/929833
Method 3:
Let's temporarily disable antivirus and check if that helps, refer the link for more information.
http://windows.microsoft.com/en-US/windows7/Disable-antivirus-software
Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you shouldn't disable your antivirus software. If you have to temporarily disable it to install other software,
you should re-enable it as soon as you're done. If you're connected to the Internet or a network while your antivirus software is disabled, your computer is vulnerable to attacks.
You may also refer the following link:
"0x0000000a" Stop error code when you resume a Windows 7-based computer from sleep or from hibernation
http://support.microsoft.com/kb/2732487
Hope this helps.
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.
Hi Arnav, thank you for your reply. I believe I have done all of the things you have indicated already. I even uninstalled my AV but unfortunately it still fails. Any other suggestions?

Similar Messages

80246002 error after installing Windows Update Agent 7.6.7600.320

This problem prevents Windows Update from being able to search, download, and install updates.
I am experiencing this issue on machines running Server 2008 R2 and Windows 7 Enterprise (I imagine this an issue with Windows Update and not the OS so this is probably affecting other OS' as well).
This problem is becoming widespread quickly.
The proposed fix (method 1) in the article below did not resolve the problem:
http://support.microsoft.com/kb/958056/en-us
Note: Method 2 is not viable when applying more than one update at a time especially when you are updating multiple machines.
Several others are posting similar problems:
http://windowsitpro.com/windows-update/tracking-error-80246002-windows-update-problem
http://forums.techguy.org/windows-7/1132320-windows-update-problems-4.html
This is preventing scheduled server maintenance from being performed.
Could this be a targeted attack? Happening at the end of the week before a long holiday weekend is not leaving me with a very good feeling...
I would hope that fixing this issue would be a very high priority.
BTW - There is no "Windows Update Issue" forum category that I could find - If there is, sorry for posting in the wrong area.
Cheers,
Jeff

My fix that worked...
Reviewed the operational log for the WindowsUpdateClient (buried in the Event viewer here:
Application and Services Logs -> Microsoft -> Windows -> WindowsUpdateClient -> Operational
After review, I noticed that event 30 "Windows Updates established connectivity" was no longer occurring and that event 42 "There has been a change in the health of Windows Update" was the only thing after the error (Event 25 "Windows Update failed
to check for updates with error 0x80246002")
Even though the machine was restarted after applying the "Windows Update Agent 7.6.7600.320" patch and I had tried restarting the Windows Update service, the service appears to be hung.
Solution:
1.) restart the Windows update service
2.) monitor the operational log for the WindowsUpdateClient (refreshing every 5-10 seconds)
3.) verify that event 30 happens (you should see event 38 after restarting the service followed by (2) event 42, then event 30)
4.) Once event 30 happens go to the Windows update GUI and run the "Check for updates" - yay!
5.) You can go back into the operational log and see event 26 "Windows Update successfully found x updates" followed by an event 40 for each update found.
What is really strange is that I checked the first machine that experienced the problem and it magically fixed itself.
It seems like this may have been caused by DDOS attack on the source for windows updates that the Windows Update service connects to. Or the source location was having maintenance performed.
Regardless, in my case, this was not a problem with the OS or the patch but the inability for the Windows Update Service to establish connectivity.
Hope that helps somebody :)
Cheers,
Jeff

My Pavillion m7760n has stopped installing windows updates, Error Code 0x80070020. Unable to find a

my Pavillion m7760n has stopped installing windows updates, Error Code 0x80070020. Unable to find a fix for it.

Start with this: http://support.microsoft.com/mats/windows_update/en-us?entrypoint=lightbox
Then if that does not do it: http://support.microsoft.com/kb/883825/en-us
{---------- Please click the "Thumbs Up" to say thanks for helping.
Please click "Accept As Solution" if my help has solved your problem. ----------}
This is a user supported forum. I am a volunteer and I do not work for HP.

When trying to update my CC apps, the update fails. I get this error: Update Failed. There was an error installing this update. Please try again later or connect customer support. This is currently happening for InDesign, Photoshop and Bridge. I had this

When trying to update my CC apps, the update fails. I get this error: Update Failed. There was an error installing this update. Please try again later or connect customer support. This is currently happening for InDesign, Photoshop and Bridge. I had this problem previous and was able to fix by doing a complete wipe of my computer and reinstalling CC. However, I should not have to wipe my computer clean everytime I need to do a CC update. HELP!

Hi,
Please download the updates directly from the link below:
WIN: All Adobe CC 2014 Updates: The Direct Download Links for Windows | ProDesignTools
MAC: All Adobe CC 2014 Updates: The Direct Download Links for Mac OS | ProDesignTools
Regards,
Sheena

Server 2012 (not R2) RODC fails to install Windows Updates

Good morning all
Since around October, our 80-odd 2012 (non-R2) RODCs have been failing to install windows updates, rolling them back on reboot. Patches that don't require a reboot are fine. The short version is, please log a call with MS and reference this thread, if you're
having this issue as currently they're saying they won't fix this!!
Our product support group opened an official case and reported this with Microsoft and they've found the cause. PLEASE NOTE however, that this relates to RODC and ALL patches failing, not just 3000061 on non-RODC.
There was some chat relevant to this as originally it was thought KB3000061 was to blame, and a few other people had had the same issue there (see links at the bottom). I think however, that this issue now stands alone as any patch we try to install will
fail.
000093 2015-01-23 20:18:30, Info CSI 00000015 Begin executing advanced installer phase 38 (0x00000026) index 4 (sequence 43)
000094 Old component: [ml:350{175},l:348{174}]"Microsoft-Windows-Web-Services-for-Management-Core, Culture=neutral, Version=6.2.9200.16384, PublicKeyToken=31bf3856ad364e35, ProcessorArchitecture=wow64, versionScope=NonSxS"
000095 New component: [ml:350{175},l:348{174}]"Microsoft-Windows-Web-Services-for-Management-Core, Culture=neutral, Version=6.2.9200.17100, PublicKeyToken=31bf3856ad364e35, ProcessorArchitecture=wow64, versionScope=NonSxS"
000096 Install mode: install
000097 Installer ID: {118ca598-79a0-4297-953d-e82183960fd2}
000098 Installer name: [13]"Group Trustee"
000099 2015-01-23 20:18:30, Error CSI 00000001@2015/1/23:20:18:30.673 (F) CMIADAPTER: Inner Error Message from AI HRESULT = HRESULT_FROM_NT(STATUS_NOT_SUPPORTED)
000100 [
000101 (null)
000102 ]
000103 [gle=0x80004005]
000104 2015-01-23 20:18:30, Error CSI 00000002@2015/1/23:20:18:30.673 (F) CMIADAPTER: AI failed. HRESULT = HRESULT_FROM_NT(STATUS_NOT_SUPPORTED)
000105 Element:
000106 [372]"<groupTrustee xmlns="urn:schemas-microsoft-com:asm.v3" name="WinRMRemoteWMIUsers__" description="Members of this group can access WMI resources over management protocols (such as WS-Management via the Windows Remote Management service). This applies only to WMI namespaces that grant access to the user." type="User" enabled="true">
000107
000108 <members></members>
000109
000110 </groupTrustee>"
000111 [gle=0x80004005]
000112 2015-01-23 20:18:30, Error CSI 00000003@2015/1/23:20:18:30.673 (F) CMIADAPTER: Exiting with HRESULT code = HRESULT_FROM_NT(STATUS_NOT_SUPPORTED).
000113 [gle=0x80004005]
Cause:
The installer uses SAM API calls to manage the group. It always connects to the local SAM instance. The component also handles an uninstall task in the same function. On uninstall the group is being deleted.
So the SAM handle is requested with "Create Group" and "Delete" access.
The error happens because a RODC does not allow any changes and thus returns STATUS_NOT_SUPPORTED.
More information about the prevent from accidental deletion feature please refer :
http://technet.microsoft.com/en-us/library/cc773347(v=WS.10).aspx
http://technet.microsoft.com/en-us/library/cc739350(v=WS.10).aspx
Recommendation:
This is a Bug in the RODC running on server 2012, However you may do an in place upgrade to Server 2012 R2 and then proceed with the installation of the patch.
The bad news is this is fixed in 2012 R2 with a hotfix - but it isn't fixed in 2012 and it won't be because.. they've only had one official report logged. And that was by us. So, if you want this fixed, you need to start logging this with MS now.
What I can say just now is that this isn't related to the registry fixes with WinEVT we've all been trying, it's NOT limited to 2008 that has been upgraded in place to 2012 (our product support group replicated it in the lab with a brand new 2012 promoted
to RODC) and it IS only happening with RODC. Possible fix might be to make your RODC RW for a bit and install your patches then.
Background reading:
https://social.technet.microsoft.com/Forums/en-US/f77691d8-a9d0-4714-98ad-71665cfa8965/kb3000061-fails-to-install-on-server-2012?forum=winserver8gen
https://social.technet.microsoft.com/Forums/en-US/70219bcb-36a8-466e-900b-cbf390db38d2/failure-configuring-windows-updates-reverting-changes-postreboot-status-0x800f0922?forum=winserver8gen

The error indicates that IIS is returning a "404 not found" error back to the Windows Update Agent. That might mean that you need to specify the correct port that WSUS is listening on, e.g.:
WSUSServer=http://yourserver:8530
Thanks,
-Michael Niehaus
Senior Product Marketing Manager, Windows Deployment
http://blogs.technet.com/mniehaus
[email protected]

Some of the machines are not installing windows updates in SCCM 2012 SP1

I have deployed the current month patches to the machines. But, some of the machines are failed to install.
Most commonly I am getting the below errors in windowsupdate.log ,
Report REPORT EVENT: {811D3FE5-A254-4C7E-B7F1-6132320AD5E0}
2015-02-23 08:18:40:851-0000 1
148 101
{00000000-0000-0000-0000-000000000000}
0 80072ee2
CcmExec Failure
Software Synchronization Windows Update Client failed to detect with error 0x80072ee2.
::OnScanComplete -Scan Failed with Error=0x80072f78
How to resolve this issue with installing windows updates?
0x80072ee2 looks like time out error.

I have uploaded the log file on dropbox
https://www.dropbox.com/s/bt09vpyhab56dgs/WindowsUpdate%20log.txt?dl=0
I am going to check WSUS IIS log file. I will keep you posted with my findings.
I dont know how to confirm whether the client is talking with wsus server or not. But, I could see some more errors in softwareupdates related logs,
Below is the error in updatestore.log,
Failed to refresh Resync state message. Error = 0x87d00310.
Below are the errors in update deployment.log,
Job error (0x80072ee2) received for assignment ({1566B12B-1731-479D-BFD1-98F2D24346B2}) action - Update Deployment
Job error (0x80072ee2) received for assignment ({1566B12B-1731-479D-BFD1-98F2D24346B2}) action
Updates will not be made available

SCCM Client PC's failing to download/install Windows Updates

Hi,
Last month I noticed that our client PC's, shortly after they had built (using SCCM Task Sequence) were downloading and installing Windows Updates using the usual Windows Update process. What I mean is, I had Software Centre showing Updates as installing,
but also had the Windows Update agent installing various updates. It was also showing in the start menu (Yellow icon saying Shut down and install updates). Now my understanding is, that that shouldn't of been happening, and only SCCM/Software Centre should
be showing Windows Updates as installing.
I noticed that we had some GPO's set for Windows Updates, which I have disabled, as I believed these were not necessary. Also, I like to control my Updates via SCCM Software Update groups after testing them, and not just allow clients to grab any updates
that are required and approved.
My problem now is, none of the clients are getting/installing any updates. I'm getting the following errors in the WUAHandler.log:
Unable to read existing WUA resultant policy. Error = 0x80070002.
WUAHandler
09/04/2015 19:03:29
8732 (0x221C)
Group policy settings were overwritten by a higher authority (Domain Controller) to: Server and Policy NOT CONFIGURED
WUAHandler
09/04/2015 19:03:29
8732 (0x221C)
Failed to Add Update Source for WUAgent of type (2) and id ({FC358571-80C5-4EAA-8A33-F79AD4C14785}). Error = 0x87d00692.
WUAHandler
09/04/2015 19:03:29
8732 (0x221C)
So, I've checked in:
HKLM\Software\Policies\Microsoft\Windowa\WindowsUpdate\ & HKLM\Software\Wow6432Node\Policies\Microsoft\Windows\WindowsUpdate
and neither have a WSUS server set. I'm assuming this is correct?
RSOP shows all policies in \\Computer Configuration\Administrative Templates\Windows Components\Windows Update as
DISABLED
GPEDIT shows \\Computer Configuration\Administrative Templates\Windows Components\Windows Update\Specify intranet Microsoft update service location as
Enabled and as our server (https://XXX.XXX:8531) - I'm assuming this is what SCCM client sets as if I changed this setting and then restart the setting comes back. If it was a Group Policy conflict then I
would expect to see it in RSOP.
Does anyone have any suggestions? I'm puzzled as to what to look at next. Is my first assumption of having 0 group policies configured for WSUS correct? Am I also correct in assuming Windows Updates shouldn't show in Control panel, or at the Start > Shutdown
prompt, and only show in Software Centre?
Thanks, and sorry for the long winded post!

Hey Jason,
Thanks for replying and explaining the WUA stuff. That made sense to be but my mind was being clouded by the issue all of the PC's/Clients onsite were, and are still getting. I cleared out the Group Policy cache as detailed on the link.
- Cleared C:\Program Data\Microsoft\Group Policy\History\*.*
- Ran a gpupdate /force
- Restarted PC
Issue still remains. Here is the output from the WUAHandler.log
CWuaHandler::SetCategoriesForStateReportingExclusion called with E0789628-CE08-4437-BE74-2495B842F43B;E0789628-CE08-4437-BE74-2495B842F43B,A38C835C-2950-4E87-86CC-6911A52C34A3; for leaves and E0789628-CE08-4437-BE74-2495B842F43B,A38C835C-2950-4E87-86CC-6911A52C34A3;
for bundles
WUAHandler 13/04/2015 16:14:34 2508 (0x09CC)
Its a WSUS Update Source type ({FC358571-80C5-4EAA-8A33-F79AD4C14785}), adding it. WUAHandler 13/04/2015 16:15:02 2488 (0x09B8)
Unable to read existing resultant WUA policy. Error = 0x80070002. WUAHandler 13/04/2015 16:15:02 2488 (0x09B8)
Enabling WUA Managed server policy to use server: https://(Name.domain of our SCCM SUP):8531 WUAHandler 13/04/2015 16:15:02 2488
(0x09B8)
Waiting for 2 mins for Group Policy to notify of WUA policy change... WUAHandler 13/04/2015 16:15:02 2488 (0x09B8)
Unable to read existing WUA resultant policy. Error = 0x80070002. WUAHandler 13/04/2015 16:15:11 2488 (0x09B8)
Group policy settings were overwritten by a higher authority (Domain Controller) to: Server and Policy NOT CONFIGURED WUAHandler 13/04/2015 16:15:11 2488 (0x09B8)
Failed to Add Update Source for WUAgent of type (2) and id ({FC358571-80C5-4EAA-8A33-F79AD4C14785}). Error = 0x87d00692. WUAHandler 13/04/2015 16:15:11 2488 (0x09B8)

An update was available but got this message: There was an error installing this update. Please quit and try again later. Error Code: U44M1I200

What does this message mean?
There was an error installing this update. Please quit and try again later. Error Code: U44M1I200

try updating manually,
pre cc updates: http://www.adobe.com/downloads/updates/
cc updates: http://prodesigntools.com/adobe-cc-updates-direct-links-windows.html

Installed windows updates. Stuck on "getting windows ready"

Hi Guys,
I've installed windows updates on our mail server (security updates and Exchange CU6). After rebooting the server is stuck on "getting windows ready". This is in our test environment for exchange migration(so I'm not worried if this is down for
a while).
The issue I have is because it won't get past this screen I can't actually view any errors in event viewer etc. I've tried safe mode, safe mode with command prompt and last known good config.
Any ideas as to how I can get into windows?
http://i.imgur.com/3TmnK2x.png (stuck here)

Hi NZ_Kiwi,
PLease follow the steps below:
1. please run the Windows Update troubleshooter in safe mode to find the error information.
2. A clean boot helps to eliminate software conflicts and to determine what is causing the problem. To perform a clean boot, please refer to the section “How to perform a clean boot” and
follow the instructions:
http://support.microsoft.com/kb/929135
If there is anything else regarding this issue, please feel free to post back.
Best Regards,
Anna
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

How to install Windows Updates on a 2012 Domain Controller w/Group Policy Settings

Hello All,
I'm having an issue installing Windows Updates on my Windows Server 2012 Standard with AD DS role, acting as a backup DC.
I have Group Policies setup for the Domain Controllers to download updates from my WSUS server but not to install them. When I go to my Windows Server 2003 R2 Domain Controller, I can install updates via the "Install Updates and Shutdown". That
option doesn't show up on the 2012 server. I can see from my WSUS server and the event viewer that the updates are being downloaded to the 2012 server........just no option for me to install the updates.
Am I just missing something or will I need to change the way my Group Policy is setup to allow installs and/or downloads? Any help would be greatly appreciated!
Tony

So I've totally removed the GPO settings for configuring updates on the Default Domain Controllers OU and I can get the Windows Server 2003 Server to get updates from Windows Updates, but the 2012 Server still won't show me how to download or install any
updates. It just states on the log-in screen that there are "Windows Updates Sign in and install important updates".
Well guess what Microsoft! I've signed in and still don't see where I can install updates!!!
I guess because you've set AU=3.
There doesn't seem to be much documented in depth about AU/WUAgent (not in the history of forever), but Lawrence and others in the WSUS forum do cover a lot of related question about the agent and also GP settings.
Lawrence has blogged a lot of detail about the registry settings which are available for AU/WU, and how some of those settings are not practically of any use since WinXP.
So, even though your question isn't about WSUS, the WSUS forum is a great place to visit for help for WUAgent etc.
Anyway, "where can I install updates?" :
on the Start screen, Search for "Windows Update"
or
Settings charm
Change PC Settings
Update and Recovery
Windows Update
or
Control Panel\System and Security\Windows Update
Some further (light) discussion on the "new" behaviour:
http://blogs.msdn.com/b/b8/archive/2011/11/14/minimizing-restarts-after-automatic-updating-in-windows-update.aspx
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

HT3986 i made a dual boot of windows 7 and mac os x lion in my macbook pro .i installed microsoft support software also. now, can i install windows updates? do i turn on the automatic updating of updates?

i made a dual boot of windows 7 and mac os x lion in my macbook pro .i installed m icrosoft support software also. now, can i install windows updates? do i turn on the automatic updating of updates?

yes you need the updates and patches.
Only some of the drivers that Windows will automatically install at times
and always make sure to insure it is using restore points
do all the maintenance andsuch as normal
use MS Security Essentials for AV is really top notch
Clean disk space
Use WinClone new program to inisure you have a restore image

I made a dual boot of windows 7 and mac os x lion in my macbook pro .i installed m icrosoft support software also. now, can i install windows updates? do i turn on the automatic updating of updates? does hot fix of microsoft helps in stop freezing?

i made a dual boot of windows 7 and mac os x lion in my macbook pro .i installed m icrosoft support software also. now, can i install windows updates? do i turn on the automatic updating of updates? does hot fix of microsoft i.e, " support.microsoft.com/kb/979491" helps in stop freezing in dual boot mechanism?

Windows has a software updater built into Windows and when you install the Boot Camp drivers then it will install an Apple software updater also. I believe Windows is set to automatically download and install your updates as does the Apple software Updater. They both will update the individual files it needs to periodically.
"Microsoft updates" and "Windows updates" are basically the same thing in Windows. Are you talking about the "Windows support software" when downloading from Boot Camp Assistant? Apple installs a software updater for it's Boot Camp drivers in Windows 7 so you can do it manually or automatically.
The "Hot Fix" your referring to is only for certain motherboards built from other Windows only computer manufacturers and does NOT pertain to any Apple computers.
If you have a problem with your computer then it's best to ask a specific question so we can help better.

PS CS6, help-updates errers...There was an error installing this update. Please quit and try again later. Error Code: U44M1I200 CS6 5.0.2 Update There was an error installing this update. Please quit and try again later. Error Code: U44M1I200 Photoshop

Adobe Bridge CS6 5.0.2 Update
There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
Adobe Bridge CS6 5.0.2 Update
There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
Photoshop Camera Raw 8.7.1(CC)
There was an error downloading this update. Please quit and try again later. Error Code: U43M1U49
Photoshop Camera Raw 8.7.1(CS6)
There was an error downloading this update. Please quit and try again later. Error Code: U43M1U49
Dynamic Link Media Server CS6 1.0.1 Update
There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
Adobe Photoshop 13.0.1.3
There was an error downloading this update. Please quit and try again later. Error Code: U43M1U49
Adobe Photoshop 2014.2.2
There was an error downloading this update. Please quit and try again later. Error Code: U43M1U49
Adobe CSXS InfrastructureCS6
There was an error downloading this update. Please quit and try again later. Error Code: U43M1U49
Extension Manager 6.0.8 Update
There was an error downloading this update. Please quit and try again later. Error Code: U43M1U49

Hi,
You can visit Error U44M1I210 | Install updates and see if it works.
Regards
Kishan

Adobe Photoshop 13.0.1.2 There was an error installing this update. Please quit and try again later.

I received the following message when trying to update for PS CS6 and PS CS6 (64 bit). Does anyone know how to correcte this so it so the update will install? Thank you.
Adobe Photoshop 13.0.1.2
There was an error installing this update. Please quit and try again later. Error Code: U44M1I210

See the following help documents for possible solutions:
http://helpx.adobe.com/creative-suite/kb/error-u44m1i210-installing-up dates-ccm.html
http://helpx.adobe.com/photoshop/kb/photoshop-cs6-updates-dont-install.html

Hello, i cannot update elements 12, i get this message: Adobe Premiere Elements 12.1 update There was an error installing this update. Please quit and try again later. Error Code: U44M1P2003 Adobe Photoshop Elements 12.1 update There was an error instal

hello i cannot update elements 12, i get this message:
Adobe Premiere Elements 12.1 update
There was an error installing this update. Please quit and try again later. Error Code: U44M1P2003
Adobe Photoshop Elements 12.1 update
There was an error installing this update. Please quit and try again later. Error Code: U44M1P2003

Update 12.1 installation errors | Photoshop Elements, Premiere Elements

Error installing Windows updates

Similar Messages

Maybe you are looking for