Error Installing XI system

Hi,
When I try to run the install of either the Database instance or the Central Instance of the WAS640 (ABAP), I receive these messages. Can someone tell me what is missing in my setup or configuration? (I am hoping the second message is a result of the first message).
MOS-01049 Processing of host operation Content of table: t_HostInfo_SHARED Row[0] HostRole="LOCALHOST" Condition="true" OpMode="getInfo" HostName="value(NEEDED)" HostNameLength="value(NEEDED)" HostAddresses="value(NEEDED)" HostAliases="value(NEEDED)" HostCpuCount="value(NEEDED)" HostPlatform="value(NEEDED)" HostRam="value(NEEDED)" HostSwap="value(NEEDED)" HostCpuFamily="value(NEEDED)" HostOsFaName="value(NEEDED)" HostOsName="value(NEEDED)" HostOsType="value(NEEDED)" failed.
I have checked host name and ip address is added into /etc/hosts file.
Any idea on this.
Thanks
Lisa

Lisa,
Check this url for some help:
XI Installation Step-by-step procedure
---Satish

Similar Messages

I tried to install latest OS update. Recd error installing. IT tried to load the upgrade in Safe Mode. Now system will not boot up. IT says I have to do a clean install which loses all data.

After receiving an error when I try to install the latest update of OS-X, I took my laptop to oour schools IT dept. They tried to run the update in safe mode and then they got an error saying the system could not find the hard drive. Now they want to run a clean install which loses 1000's of docs and pictures. I have Block I exams in med school next Monday and all of my notes and slides are on that hard drive.
The IT dept took the hard drive out and tried to back it up and they said they other computer could not connect or find my hard drive.
Major panic....
I have Norton antivirus and have never found any viruses on the system. I also have a program called ExamSoft which some other students here have noted they had similar crashes. Not sure if that is the issue...

Several take home messages here:
always back up before you update.
always back up anything you don't want to lose. Kind of like flossing. Only floss the teeth you don't want to lose.
Norton is very, very bad software, and you should get rid of it.
You don't need antivirus software on your mac. Antivirus software on macs causes more trouble than it is worth.
Your hard drive may be failing and thus may not be salvageable.
You could try booting into the recovery partition and seeing if you can repair your hard drive.
If that doesn't work, then there is a small chance that a third party utility (like Disk Warrior or TechTool) might be able to fix your drive (if it is not failing).
If that doesn't work, you may be able to send your drive and a lot of cash to a drive recovery service and see if they can get your files off it.
In the mean time, get notes and slides from a (smart) friend.

Error phase Install Common system files SAP NW 7.1

Hello
I have a problem in my installation of SAP NW 7.1 for PI
I was installating the SAP NW but I stopped it and deleled this system (SID=TPI), then I started again the installation (SID=PI1) but in the phase Install Common System Files i got this message:
sapint_dev.log
           CJSlibModule::writeInfo_impl()
File system node C:/WINDOWS/TEMP exists already. Nothing to do.
INFO       2010-07-09 17:30:13.765
           CJSlibModule::writeInfo_impl()
File system node D:/usr/sap exists already. Nothing to do.
INFO       2010-07-09 17:30:13.765
           CJSlibModule::writeInfo_impl()
Creating SAP system shares for PI1...
WARNING[E] 2010-07-09 17:30:13.921 [ianxbservi.hpp:244]
           CServiceHandle::Open(ClusSvc)
FSL-06002 Error 1060 (The specified service does not exist as an installed service.
) in execution of a 'OpenService' function, line (267), with parameter (ClusSvc).
WARNING[E] 2010-07-09 17:30:14.109
           CJSlibModule::writeError_impl()
CJS-30129 Creating node $(DIR_CCMS) with type DIRECTORY failed. Original exception text was: syslib.filesystem.nodeCreationFailed:
Unable to create node
pgspi\saploc\ with type DIRECTORY: can't create parent node...
WARNING[E] 2010-07-09 17:30:14.171
           CJSlibModule::writeError_impl()
CJS-30129 Creating node $(DIR_CCMS) with type DIRECTORY failed. Original exception text was: syslib.filesystem.nodeCreationFailed:
Unable to create node
pgspi\saploc\ with type DIRECTORY: can't create parent node...
ERROR      2010-07-09 17:30:14.234 [sixxcstepexecute.cpp:984]
FCO-00011 The step createFirstSystemDirectories with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_System|ind|ind|ind|ind|5|0|createFirstSystemDirectories was executed with status ERROR .
WARNING    2010-07-09 17:30:14.437 [iaxxejshlp.cpp:150]
Could not get property IDs of the JavaScript object.
ERROR      2010-07-09 17:30:14.437 [iaxxejsctl.cpp:492]
FJS-00010 Could not get value for property .
INFO       2010-07-09 17:30:45.921 [sixxcstepexecute.cpp:1072]
An error occured and the user decided to stop.\n Current step "|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_System|ind|ind|ind|ind|5|0|createFirstSystemDirectories".
INFO       2010-07-09 17:30:48.640 [synxccuren.cpp:1016]
           CSyCurrentProcessEnvironmentImpl::setWorkingDirectory(const CSyPath & C:/Program Files/sapinst_instdir/NW71/INSTALL/SYSTEM/MSS/STD/AS)
           lib=syslib module=syslib
Working directory changed to C:/Program Files/sapinst_instdir/NW71/INSTALL/SYSTEM/MSS/STD/AS.
   LOG sapint.log
INFO 2010-07-09 17:30:13.296
Execute step createFirstSystemDirectories of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_System|ind|ind|ind|ind|5|0
INFO 2010-07-09 17:30:13.750
File system node C:/WINDOWS/TEMP exists already. Nothing to do.
INFO 2010-07-09 17:30:13.765
File system node D:/usr/sap exists already. Nothing to do.
INFO 2010-07-09 17:30:13.765
Creating SAP system shares for PI1...
WARNING[E] 2010-07-09 17:30:13.921
FSL-06002 Error 1060 (The specified service does not exist as an installed service.
) in execution of a 'OpenService' function, line (267), with parameter (ClusSvc).
WARNING[E] 2010-07-09 17:30:14.109
CJS-30129 Creating node $(DIR_CCMS) with type DIRECTORY failed. Original exception text was: syslib.filesystem.nodeCreationFailed:
Unable to create node
pgspi\saploc\ with type DIRECTORY: can't create parent node...
WARNING[E] 2010-07-09 17:30:14.171
CJS-30129 Creating node $(DIR_CCMS) with type DIRECTORY failed. Original exception text was: syslib.filesystem.nodeCreationFailed:
Unable to create node
pgspi\saploc\ with type DIRECTORY: can't create parent node...
ERROR 2010-07-09 17:30:14.234
FCO-00011 The step createFirstSystemDirectories with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_System|ind|ind|ind|ind|5|0|createFirstSystemDirectories was executed with status ERROR .
WARNING 2010-07-09 17:30:14.437
Could not get property IDs of the JavaScript object.
ERROR 2010-07-09 17:30:14.437
FJS-00010 Could not get value for property
I had found information about saploc however still I got the same
The installation is on Windows 2003 + Sql 2005
Any suggestion    for this problem
Thanks
Danny

Hello
I deleted the system with the wizard on sapinst
NetWeaver Process Integration 7.1 Software Life-Cycle Options Uninstall Uninstall ‒ SAP systems or
single instances .
Danny
Edited by: Danny Sanchez on Jul 12, 2010 4:17 PM

Mac won't update software or access iTunes shop. Message comes up with 'not connected to the net. Check connections' error. I still have internet access. Changed my Apple ID but no result. Repaired permissions and re-installed operating system.

Mac won't update software or access iTunes shop. Message comes up with 'not connected to the net. Check connections' error. I still have internet access. Changed my Apple ID but no result. Repaired permissions and re-installed operating system.

It sounds like you may have multiple problems, but none of them are likely to be caused by malware.
First, the internet-related issues may be related to adware or a network compromise. I tend to lean more towards the latter, based on your description of the problem. See:
http://www.adwaremedic.com/kb/baddns.php
http://www.adwaremedic.com/kb/hackedrouter.php
If investigation shows that this is not a network-specific issue, then it's probably adware. See my Adware Removal Guide for help finding and removing it. Note that you mention AdBlock as if it should have prevented this, but it's important to understand that ad blockers do not protect you against adware in any way. Neither would any kind of anti-virus software, which often doesn't detect adware.
As for the other issues, it sounds like you've got some serious corruption. I would be inclined to say it sounds like a failing drive, except it sounds like you just got it replaced. How did you get all your files back after the new drive was installed?
(Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.)

1)Could not start up os x 2)Only could start bootcamp 3)Tried resetting nvram 4)Could not start even in bootcamp 5)Verify disk says -. Verifying volume "Macintosh HD" Error: Live file system repair is not supported 6)Installed maverick on USB d

1) Could not start up os x
2) Only could start bootcamp
3) Tried resetting nvram
4) Could not start even in bootcamp
5) Verify disk says …. Verifying volume “Macintosh HD”
Error: Live file system repair is not supported
6) Installed maverick on USB drive
7) Boot from USB drive. Tried verifying HD: Volume header needs minor repair. The volume Recovery HD was found corrupt and needs to be repaired. Verifying volume “Macintosh HD”: Error: live file system repair is not supported.
8) The terminal code says
9) Last login: Wed Feb 11 14:09:47 on console
10) xxxx-MacBook:~ xxxx$ diskutil list
11) /dev/disk0
12) #: TYPE NAME SIZE       IDENTIFIER
13) 0:      GUID_partition_scheme *160.0 GB   disk0
14) 1: EFI EFI 209.7 MB   disk0s1
15) 2:                  Apple_HFS Macintosh HD            80.1 GB disk0s2
16) 3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
17) 4:       Microsoft Basic Data 50.0 GB    disk0s4
18) /dev/disk1
19) #: TYPE NAME SIZE       IDENTIFIER
20) 0:      GUID_partition_scheme *15.6 GB    disk1
21) 1: EFI EFI 209.7 MB   disk1s1
22) 2:                  Apple_HFS BOOT                    14.8 GB    disk1s2
23) 3:                 Apple_Boot Recovery HD             650.0 MB   disk1s3
24) Saeedehs-MacBook:~ saeedehmirbagheri$ diskutil cs list
25) No CoreStorage logical volume groups found
26) Saeedehs-MacBook:~ saeedehmirbagheri$ sudo gpt -vv -r show /dev/disk0
27) Password:
28) gpt show: /dev/disk0: mediasize=160041885696; sectorsize=512; blocks=312581808
29) gpt show: /dev/disk0: PMBR at sector 0
30) gpt show: /dev/disk0: Pri GPT at sector 1
31) gpt show: /dev/disk0: Sec GPT at sector 312581807
32) start       size index contents
33) 0          1 PMBR
34) 1          1 Pri GPT header
35) 2         32 Pri GPT table
36) 34          6
37) 40     409600      1 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
38) 409640 156394528      2 GPT part - 48465300-0000-11AA-AA11-00306543ECAC
39) 156804168    1269544      3 GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
40) 158073712   56853648
41) 214927360   97652736      4 GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
42) 312580096       1679
43) 312581775         32         Sec GPT table
44) 312581807          1         Sec GPT header
45) xxxx-MacBook:~ xxxx$ sudo fdisk /dev/disk0
46) Disk: /dev/disk0 geometry: 19457/255/63 [312581808 sectors]
47) Signature: 0xAA55
48) Starting       Ending
49) #: id cyl hd sec - cyl hd sec [     start - size]
50) ------------------------------------------------------------------------

Thank you -
I booted from external USB. The diskutil list output is from OS x booting from the USB, which shows the following:
Saeedehs-MacBook:~ saeedehmirbagheri$ diskutil list
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *160.0 GB   disk0
   1:                        EFI EFI                     209.7 MB   disk0s1
   2:                  Apple_HFS Macintosh HD            80.1 GB    disk0s2
   3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
   4:       Microsoft Basic Data                         50.0 GB    disk0s4
/dev/disk1
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *15.6 GB    disk1
   1:                        EFI EFI                     209.7 MB   disk1s1
   2:                  Apple_HFS BOOT                    14.8 GB    disk1s2
   3:                 Apple_Boot Recovery HD             650.0 MB   disk1s3
Saeedehs-MacBook:~ saeedehmirbagheri$ diskutil cs list
No CoreStorage logical volume groups found
I am not able to use target disk mode because I don't have firewire/thunderbolt ports.

Sapinstallation error in second step Install common system File.

Hi,
I am installing the SOLMAN on Linux RHEL5 and i am facing the error in second step Install common system File .
sapinst.log ERROR Logs ;
Output of /tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/installsapinit.sh is written to the logfile installsapinit.sh.log.
WARNING 2011-08-15 09:56:21.770
Execution of the command "/tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/installsapinit.sh" finished with return code 3. Output:
/tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/installsapinit.sh: line 48: uname: command not found
ERROR 2011-08-15 09:56:21.774
MUT-03011 Execution of the command "/tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/installsapinit.sh" finished with return code 3. Output:
/tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/installsapinit.sh: line 48: uname: command not found
ERROR 2011-08-15 09:56:21.913
FCO-00011 The step installSAPInit with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|onehost|0|NW_System|ind|ind|ind|ind|system|0|installSAPInit was executed with status ERROR ( Last error reported by the step: Execution of the command "/tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/installsapinit.sh" finished with return code 3. Output:
/tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/installsapinit.sh: line 48: uname: command not found).
Can any one please help me on this...

Hello,
the "uname" command is part of the coreutils package on RHEL. Please check if the coreutils package is installed:
rpm -qa | grep -i coreutils
If the coreutils package is not installed you can install it with
yum install coreutils
Regards,
Frank

MDT 2012 - Failed to Run Action: Install Operating System Access is Denied (Error: 0000005; Source: Windows)

Unable to deploy any image with WIM file. Vanilla or Custom Image gives the following error:
ZTI Error – Unhandled error returned by LTIApply: invalid procedure call or argument (5)
Litetouch deployment failed, Return code = -2147467259 0x80004005
Failed to run action: Install Operating System.
Access is denied (Error: 00000005; Source: Windows)
Tried Giving Everyone Full rights to the deployment share
Rebooted Server
Updated Deployment Share
Any ideas would be great!
Thanks
Rick
Richard Ray

https://skydrive.live.com/redir?resid=57E5397C8C507949!129&authkey=!AJDCfz7nGblrdQE&ithint=folder%2c.log
Please try this link.
Kris Da San Martino
The SMSTS.log shows
Expand a string: WinPEandFullOS TSManager 2/18/2014 1:35:48 PM 1508 (0x05E4)
Executing command line: cscript.exe "%SCRIPTROOT%\LTIApply.wsf" TSManager 2/18/2014 1:35:48 PM 1508 (0x05E4)
Process completed with exit code 5 TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
!--------------------------------------------------------------------------------------------! TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
Failed to run the action: Install Operating System.
Access is denied. (Error: 00000005; Source: Windows) TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
Sending status message . . . TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
Executing in non SMS standalone mode. Ignoring send a task execution status message request TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
Set a global environment variable _SMSTSLastActionRetCode=5 TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
Set a global environment variable _SMSTSLastActionSucceeded=false TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
Clear local default environment TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
Let the parent group (Install) decides whether to continue execution TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
The execution of the group (Install) has failed and the execution has been aborted. An action failed.
Operation aborted (Error: 80004004; Source: Windows) TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
Failed to run the last action: Install Operating System. Execution of task sequence failed.
Access is denied. (Error: 00000005; Source: Windows) TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
Sending status message . . . TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
Executing in non SMS standalone mode. Ignoring send a task execution status message request TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
Execution::enExecutionFail != m_eExecutionResult, HRESULT=80004005 (e:\nts_sms_fre\sms\client\tasksequence\tsmanager\tsmanager.cpp,767) TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
Task Sequence Engine failed! Code: enExecutionFail TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
**************************************************************************** TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
Task sequence execution failed with error code 80004005 TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)

10g client install -- "Error in accessing system registry"

Yes, I am the administrator - there is just one account on my machine and it is me.
I am attempting to install 10g client in hopes of fixing another problem. Everything is a problem it seems.
When I launch setup.exe I get ...
"Error in accessing system registry. You may not have enough permissions to modify registry. Installation cannot continue."
My environment is ... Windows 7 Pro, I do have an Oracle Express Edition installed but since I am having a 32-bit vs. 64-bit issue with an app I am developing in C# 2008 Express, I thought I would try installing the 64-bit 10g standard edition client.

I didn't know this about Windows 7...
http://www.blogsdna.com/2168/windows-7-how-to-open-elevated-command-prompt-with-administrator-privileges.htm
I had to open a command prompt with Administrator privileges. I was tipped off by your link which had paragraph 1.4 Managing User Accounts with User Account Control and states,
To ensure that only trusted applications run on your computer, Windows Vista, Windows Server 2008, Windows Server 2008 R2, and Windows 7 provide User Account Control. If you have enabled this security feature, then, depending on how you have configured it, Oracle Universal Installer prompts you for either your consent or your credentials when installing Oracle Database. Provide either the consent or your Windows Administrator credentials as appropriate.
You must have Administrator privileges to run some Oracle tools, such as Database Configuration Assistant, Net Configuration Assistant, and OPatch, or to run any tool or application that writes to any directory within the Oracle home. If User Account Control is enabled, and you are logged in as the local Administrator, then you can successfully run each of these commands in the usual way. However, if you are logged in as "a member of the Administrator group," then you must explicitly invoke these tasks with Windows Administrator privileges. All the Oracle shortcuts that require Administrator privileges will be invoked as "Administrator" automatically when you click the shortcuts. However, if you run the above tools from a Windows command prompt, you must run them from an Administrator command prompt. OPatch does not have a shortcut and has to be run from an Administrator command prompt.
I followed the instructions concerning the elevated command prompt and then tried the Oracle 10g standard edition client install. I got past the registry problem but then I ran into a Universal Installer 10.2 problem. A window popped up stating, "Abnormal program termination. An internal error has occurred. Please provide the following files to Oracle Support:"
"Unknown"
"Unknown"
"Unknown"
Maybe that is due to 10g not being supported on Windows 7. So NOW I will try 11gR2. :-)

Error: 3816: Local System Creation during install was not successful.

Hello,
This is our first time installing Oracle Wokflow 2.6.3 Standalone.
We are having problems with the Event Manager.
When we access the event manager pages:
pls/wf/wf_event_html.listevents?resetcookie=T
pls/wf/wf_event_html.listsystems?resetcookie=T
etc.
We get this error:
Error: 3816: Local System Creation during install was not successful. Please review the install log file for errors.
Error Stack:
WF_EVENT_HTML.isAccessible(EVENTS)
WF_EVENT_HTML.ListEvents()
     The installation was successful.
     We cannot change the Local System in the Global Workflow Preferences option.
     The table WF_systems is empty.
     Should the local system appear in this table?
Thanks

Software component sap.com/LM-TOOLS with version 7.00.9.3 is found on the system but in the stack it is listed with version 7.00.9.0.
Software component sap.com/SAP-JEECOR with version 7.00.9.1 is found on the system but in the stack it is listed with version 7.00.9.0.
You are trying to upgrade a system with the lower version of sap.com/LM-TOOLS and sap.com/SAP-JEECOR. The other thing I notice is that if you are upgrading to EhP4/EhP1 NW then the version of LM and SAP-JEECOR should look something like 7.01.3.0.
Are you using MOPZ to download EhP's ? As the error message says synchronize the system with SAP Solution Manager and then generate a new stack file.
Hope this helps.
Thanks,
Naveed

Error while Installing Hyperion system 9.0

Hi,
my requirement is
to install lisence server and BI+ services in system A,and Shared services,BI+ UI services in system B.both are in lan.
i installed lisenced server,shared services and BI+ services accordingly and configured successfully.
But while installing BI+ UI services in system B
the following error came.
Errors occurred during the installation.
Unable to install Hyperion System 9 BI+ UIServices over Single-installer Suite: Installed product has newer version.
thank you

Hi,
Yes, 9.0 version will not support above server. Please check below guide:
http://www.abbasoft.com/images/Hardware_software_requirements.pdf
Thanks & Regards,
Nagarajan

Error during install " specify system property "is.debug" for more information."

I am trying to install Livecycle Reader Extensions onto a Unix box and the setup.sh is giving the following error when I try to invoke it.
"An unhandled error occurred -- specify system property "is.debug" for more information."
Anyone know how to set the is.debug property?
Sorry i'm not to familiar with the unix env.

Andrew,
can you provide more information on the following?
- variant of Unix
- java version installed
- reader extensions version
- application server enviornment intended (WAS, Weblogic, JBOSS?)
Thanks
David
www.ensemble.com

Unable to Install Identity Server : Error 20: Identity System Configuration

HI I am trying to setup IDM system as per below order.
Oracle DB -> OID (two Instance OID1 & OID2 on separate RHEL5 box) -> OVD ( OVD1 & OVD2) -> OAM
I have successfully installed this setup upto OVD. But once I started Identity Server installation, installation is breaking with Error " Setup.product.install, com.oblix.installshield.ObExecWizardAction, err, There is an error. Please try again. Error 20: Identity System Configuration already exists on the specified LDAP directory server."
Earlier Few of my tea-mates Tried installing Identity server unsuccessfully thats why may be now I am not able to install it again.
Let me tell you at what point I got above error.
Identity server installation asks two time Directory server information. First time I selected option as "Data Anywhere" and after that I have given the details of OVD (IP/Ports/cn=orcladmin/password) and I got above error. I ignored that error and continue installation and second time I selected options as " Oracle Internet Directory" and gave OID details. again I got same kind of information.
So I have droped RCU and reinstalled OID ( not OVD) and tired Identity installation but no luck got same error at first stage (OVD/Data Anywhere). This time I did not continue installation.
Please help me to resolve this issue and I also want to know how can I remove Idenitity Server Information from OVD ( and OID too for future reference).
Thanks.
Edited by: 985360 on Feb 1, 2013 9:57 AM

Hi Parmar,
The error message "Identity System Configuration already exists on the specified LDAP" is complaining that the schema objects required by OAM already exsit on the specified ldap. The schema update needs only to be performed once (usually the first Identity Server installation, although it can be performed manually as a standalone operation) on each ldap instance, after which subsequent installation of Identity Servers do not need that step, which can be avoided by answering "No" when asked if it is the first Identity Server to be installed.
In order to check if these schema objects are in your ldap, look at the schema for a lot of oblix* object classes and ob* attributes - if they are there then the schema has been added. OAM only supports OVD as the User ldap store, not the configuration store. When you first install an Identity Server, it is necessary to give OID (in your environment) as the configuration store, and the installation will usie the OID_oblix_schema_add.ldif file to update the OID schema. When you specify the user store as OVD, OAM adds VDE_user_schema_add.ldif to the OVD schema.
I suspect that your schema objects may be fine, but if you want to clean them from your directory you can use the *delete.ldif files supplied (all the ldif files are in identity/oblix/data/common) for the ldap servers, and start again.
Regards,
Colin

I received this error message: The system extension "/System/Library?Extensions/ACard6280ATA.kext" was installed improperly and cannot be used. Please try reinstalling ... . What is this about? What is ACard6280ATA.kext?

I received this error message: The system extension "/System/Library/Extensions/ACard6280ATA.kext" was installed improperly and cannot be used. Please try reinstalling ... . What is this about? What is ACard6280ATA.kext?

I'm still with you, just having a hard time wrapping my mind around the fact that you reinstalled OS X, which is like shooting a mosquito with a cruise missile, yet the problem remains.
Here is the KB article for your review: Reinstalling Mac OS X
Admittedly there is not much to it, but it should have eradicated the problem.
I would guess that the 17 "hp_" messages have something to do with Hewlett-Packard and in fact I do use an HP printer with the computer. I uninstalled the printer software and reinstalled it. The printer seems to work fine, but the kernel extension error messages still keep appearing. I'm inclined just to delete these 17 kernel extensions and then, if the printer doesn't work correctly, unintall and reinstall the printer software again. Sound sensible?
It certainly does. The only thing I can think of is that the OS reinstallation did not recognize those kernel extensions and left them untouched, AND the HP uninstaller did not remove them, AND the HP installer did not perform correctly. Having suffered through several HP botched software attempts I tend to believe that remains a posssibility.
If you are so inclined, I would remove the troublesome .kext files as you say, then reboot. Be prepared for the printer to stop working, but once you remove them try the printer again anyway. The vast majority of printers do not require any specific downloads since their drivers are already built into OS X.
As a last resort try reinstalling OS X again (I know...) and run Software Update to bring everything up to date. Apple released some new printer drivers a few weeks ago.
Finally, if this doesn't work post the same question as a new topic since I am out of ideas. A new topic will get more attention than unresolved questions with responses.

G555 (0873) error loading operating system with fresh install of XP

Hello,
I am in need of assistance. i had XP Pro installed and functioning on my Lenovo G555 0873, but due to a bad virus i received in email I needed to reload XP because it corrupted everything. Just use it for some games so wasn't worried about data. But now I get an error loading operating system after fresh install of XP Pro, Computer formats drive copyies files and restarts like itis supposed then Operating system is lost? Can you help me?
Xtiansdomain

hey Xtiansdomain,
i do hope that you created recovery media via One Key Recovery. If you did, use that to recover your system.
however if no recovery media was made, get in contact with the support crew via : http://bit.ly/LNVsuppNum
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

[Solved] Error loading operating system (USB install, unetbootin)

Hi!
I was planning on reinstalling Arch on my netbook (Asus EEE T91MT), because I messed it up a bit too far.
It still boots fine and I can log in on the console, but I can not move the mouse in xserver/xfce, wifi stopped working, and I have various other problems and errors when running commands, so I figured a reinstall would be easier.
Now I followed the same steps as last time: put arch x86 netinstall on an empty 2GB FAT32 USB stick, using the Unetbootin tool.
But when I boot from USB (press escape during boot, select the USB drive instead of SSD, press enter), it just gives me a black screen with the text:
Error loading operating system
When I look on the USB stick, it looks very normal, like an arch install medium usually looks.
Thanks for any tips in advance!
Last edited by Feroxium (2012-10-17 14:24:45)

Ah, thanks a lot!
I'll be more careful in trusting tools like unetbootin. It even clearly says on the website "arch up to 2010.05"...
Gonna try one of the alternative methods.
(editing topic title --> solved)
Last edited by Feroxium (2012-10-17 14:25:29)

Error Installing XI system

Similar Messages

Maybe you are looking for