ERROR Integration Engine configuration

hi all, i have an error. en sxmb_adm -->Integration Engine configuration y configured next parameters:
rol:Integration Server
corresponding Int. Server: http://<server>:<port>/sap/xi/engine?type=entry
When press in SL buttom, and error occure: No Access to SLD at present.
What should i Do?
Rgds
Message was edited by:
Rodrigo Pertierra
Message was edited by:
Rodrigo Pertierra

all RFC ping fine.. when execute TC SLDCHECK i get this:
Properties of RFC destination SAPSLDAPI
RFC host:
%%RFCSERVER%%
program id: SAPSLDAPI_XD0
gateway host:
gateway service:
Testing the RFC connection to the SLD java client...
RFC ping was successful
SLD server access settings:
host name: <server>
port number: <port>
user : sldduser
Use transaction SLDAPICUST if you wish to maintain the SLD server access dat
Launching the SLD GUI in a separate browser window...
=> Verify in the browser GUI that the SLD is in a healthy running state!
Calling function LCR_LIST_BUSINESS_SYSTEMS
Retrieving data from the SLD server...
Function call returned exception code 4
=> Check whether the SLD is running!
Summary: Connection to SLD does not work
=> Check SLD function and configurations
Now checking access to the XI Profile
Properties of RFC destination LCRSAPRFC
RFC host:
%%RFCSERVER%%
program id: LCRSAPRFC_XD0
gateway host:
<server>
gateway service: sapgw01
Testing the RFC connection to the SLD java client...
RFC ping was successful
Calling function EXCHANGE_PROFILE_GET_PARAMETER
Retrieving data from the XI Profile...
Function call terminated sucessfully
Retrieved value of
section = Connections
parameter = com.sap.aii.ib.server.connect.webas.r3.ashost
-> value =
Summary: Connection to the XI Profile works correctly
In transaction SXMB_ADM-->Integration engine configuration , when i do a check get this
Current Configuration (local):
@5F@ Role of Business System: Integration Server
@5F@ Client 200 is Integration Server
@8S\QURL@ Corresponding Integration Server: http://<HOST>:<PORT>/sap/xi/engine?type=sender
System Landscape:
@5C\QErrors@ No access to system landscape at present
r
 Comparison of Current Configuration with System Landscape
@5B\QOK@ Role of Business System: Current Configuration = System Landscape
Message was edited by:
 Rodrigo Pertierra
Message was edited by:
 Rodrigo Pertierra

Similar Messages

[Integration Engine Configuration Data] Error: No access to system landscap

Hi all,
When configuring Integration Engine Data (To go to 'Integration Engine Configuration Data' screen: Tcode: SXMB_ADM -> Choose: Integration Engine Configuration -> F8), we want to load Configuration from System Lanscape by choose F6, an error occur with message as below:
No access to system landscap
So that we can't load configuration from our System Landscape.
We have correctly configured other below:
     - We use http port for corresponding Integration Server.
     - Business System with role 'Integration Server' created correctly in SLD.
     - T-code SLDCHECK is all OK.
     - T-code SXI_CACHE is all OK.
Anyone can please help me correct this error ?
Point will be reward for any valuable answer,
Thanks a lot,
Vinh Vo

Please can you check if your RFC destination SAPSLDAPI and LCRSAPRFC are working both ABAP and Java stack.
just check the reply from Udo and jai's reply
R3 Connecte XI 3.0 Problem
also check page no 18
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/bd5950ff-0701-0010-a5bc-86d45fd52283

INTEGRATION ENGINE CONFIGURATION ERROR

Hi all,
I configured integration server through SXMB_ADM,but i'm getting error..
Current Configuration (local):
Role of Business System: Integration Server
Client 000 is Integration Server
Corresponding Integration Server: http://xxx:yyy/sap/xi/engine?type=entry
System Landscape:
Errors No access to system landscape at present
Comparison of Current Configuration with System Landscape
regds,
vasanth.

Hi Vasanth,
You are getting this error because the Pipeline URL parameter defined for the XI Business System in SLD is either empty or different than the one defined in "Integration Engine Configuration" in the TCode: SXMB_ADM.
Check the same. I hope this provides you a solution.
Regards.
Praveen

SXMB_ADM settings in Integration engine Configuration

Hi , with reference to the blog
How do you activate ABAP Proxies?
--- refer to the step ---2 Configuration Business system as local Integration Engine.
1. Goto Transaction SXMB_ADM
2. Choose Edit --> Change Global Configuration Data.
3. Select Role of Business System: Application system
4. Corresponding Integration server: dest://<HTTPDESTINATION>. Here <HTTPDESTINATION> SAPISU_XID created in step 1. Dest://SAPISU_XID.
Now if I do this step., then IDX5 will no more work,, rather weo2/o5 will start working.....is this ok,, i mean changing the Role of Business System = Integration server to Application system??, the usage of IDx5 will cease to exist,
Arnab

Hi,
oh i am sorry, you mean to say, as per blog,
How do you activate ABAP Proxies?
am I was supposed to do this setting for SXMB_ADM in r3 , not in XI.....is this what you meant??
Also , with reference to the above link, while creating the HTTP connection, it is giving a popup messehe, HTTP connection may not be secure.....what can be the problem due to this due to insecurity!!
Thanks in advancee!!
Edited by: Arnab Mondal on Sep 25, 2008 1:32 PM

Integration Engine -- Configure Sender/Receiver ID

All,
I'm trying to configure senders and receivers (using SAP PI 7.1) in order to prioritize messages afterwards...
My SAP ECC 6.0 system will send idocs (= business system) and my receiver is a business component.
Configuring my send is no problem. Idoc structure and namespace appear in the sender interface tab, bu when I want to configure my business component as a receiver, no interfaces appear in the list.
Only the following is appearing in the Receiver Interface list:
NAME                   NAMESPACE
InterfaceCollection http://sap.com/xi/XI/System
When I check my business component in the IB Directory, sender and receiver interfaces are clearly mentioned.
Can business components be used to configure senders and receivers?
Did I forget something?
Please advise.
Thanks a lot
Dimitri

Hi Udo,
I have a receiver agreement with the following information:
Sender:
SEDCLNT312 (SAP ECC system SED client 312)
Receiver:
   component: BC_EAI (business component)
   interface: SI_IN_DIMONAO_A
   namespace: http://www.securex.be/MF0401/DimonaOut
Then I go to Configure Sender/Receiver ID and choose BC_EAI as service.
I manually type in the namespace and the interface, but then I get an error saying
"SI_IN_DIMONAO_A is not an interface" (Exception of class CX_XMS_WRONG_INPUT)
ps: do you think the problem is solved when I use third-party business systems instead?
Thanks
Dimitri
Edited by: Dimitri Sannen on Jun 3, 2009 2:16 PM
I think I found the error: I manually added both interface and namespace and then the error is triggered.
But when I added the interface and then I put " * " for the interface, no error appears. Also the other way around, * for interface and namespace filled in.
I must test this in order to be sure this works.
Edited by: Dimitri Sannen on Jun 3, 2009 2:46 PM
When I test with a Business System as receiver, the same this happens.
I cannot indicate any receiver interface. So the same phenomenon with both a business component and business system.
Can it be this is a bug?

XI Error - Integration Scenario Configurator

When running Step 2 - Assign Services, I choose my Business Service and then Click on Assign, I receive the following error:
An assignment to a business service must be defined for each business system service. Unassigned business system services exist. These can be removed automatically.
Has anyone seen this and please detail to me what you did to resolve it? We are trying to implement E-Recruiting in this particular scenario.
Thank you!
John

Hi John,
First of all are you doing B2BScenerio,If not in A2A scnerio we can not use Bussiness service.Only Bussiness systems has to be used and you can only assign Bussiness system.
**Reward if helpfull**

System not configured as XI Integration Engin

Hi Experts,
My system working fine up to yesterday but today morning when i came and saw this error is comming System not configured as XI Integration Engin this error is showing in MONI ..
Regards
Rao

Hi rao,
Please see the following links.
ERROR Integration Engine configuration
one more
integration engine
Kindly reward points for useful answer.
Regards,
Vishal

Error: System not configured as XI Integration Engine

Hi All,
I a getting this following error in RWB-->message monitoring -->adapter engine -->audit log
"2007-11-29 09:28:45 Error Received XI System Error. ErrorCode: SYSTEM_NOT_CONFIGURED_AS_XMB ErrorText: ErrorStack: System not configured as XI Integration Engine
2007-11-29 09:28:45 Error Transmitting the message to endpoint http://p2p:8003/sap/xi/engine?type=entry using connection AFW failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: SYSTEM_NOT_CONFIGURED_AS_XMB:.
what might be the possible errors..
regards,
Rajesh

Hi Rajesh,
you can go through these chek steps
1)go to SLD-->Business systems...and check the role of business system Web AS ABAP (tht was created during installation)...check if the role is integration server
2) go to sxi_cache and in the menu tool bar goto "GoTo" and click AE cache and see if the link is fine? whether the link in sxi_cache for AE cache is showing green traffic signal and also perform a delta refresh.
3)Check whether your business system is tied to the integration server in SLD.
4)In the transaction sxmb_adm -> Integration Engine Configuration can you check whether that role has been defined as Integration Server.
hope these checks will solve your problem
Thanks
sandeep sharma
PS:If helpful Plz reward points
Also you may check whether in specific configuration you may need to add Category as Runtime Engine_Type and current value as HUB.

System not configured as Integration Engine

Hi Friends ,
I have written an outbound client proxy for my interface . I am using XI to File Adapter scenerio .
When I run the zprogram in R3 then I get the error
System not configured as Integration Engine ...
Please suggest .
Best Regards
Chan

Hi Chane,
Go to SXMB_ADM->Configuration->Integration Engine COnfiguration->Choose your R/3 system as Application System
Refer this Configuration Guide - Page no 27
https://websmp102.sap-ag.de/~sapidb/011000358700001697502004E.PDF
Regards,
Moorthy

Integration Engine does not connect with SLD

Hi all,
We have an XI 3.0 system that acts as QUA system in our track. This XI 3.0 system is connected to a central SLD installed on a PI 7.1 system that acts as our DEV system.
Everything seems to be OK in the Java part. We refresh the caches successfully and enter the SLD in DEV system.
We have a problem, though with the SXI_CACHE transaction. It shows the following message:
"Unable to refresh cache contents.Error during last attempt to refresh cache"
And the detail of the error is: "LCR_GET_OWN_BUSINESS_SYSTEM - NO_BUSINESS_SYSTEM"
We have checked in the SLD and the Business system is created.
In transaction SXMB_ADM when checking the Integration Engine connection with SLD we get the following error: "No access to system landscape at present"
In the Runtime Workbench of the system, when checking the Cache Connection, the Integration Engine part shows a warning. In the RWB also the Self Status Check of the Integration Engine gives errors:
"Are roles in SXMS_CONF_ITEMS and SLD consistent?"
We have already followed all the post installation guides, and the cache checks, and SLD checks guides.
Do you know which the soltion could be for our error??
Thanks!

Hi,
We have checkes
SM59: TCP/IP Destination: LCRSAPRFC y SAPLSDAPI. check the program ID is correct.--> connection test goes OK
HTTP destination: INTEGRATION_DIRECTORY_HMI: do a test connection: result=500--> connection test gives us 500 result
SLDAPICUST: Check the user and password and the server defined. the PI server should be the main server.--> checked, OK
SXMB_ADM>Integration Engine Configuration: Check if the destination is properly defined. should be dest://http://<server><port>/sap/xi/engine?type=entry> checked. OK
Check RZ70: wich configuration you have there?--> The configuration in the RZ70 for the SLD is pointing to the DEV system, so it is correct
SLDCHECK results:
"Properties of RFC destination SAPSLDAPI
RFC host: %%RFCSERVER%%
program id: SAPSLDAPI_XXX
gateway host: XXXX
gateway service: XXXXX
Testing the RFC connection to the SLD java client...
RFC ping was successful
SLD server access settings:
host name: XXXXX
port number: 50000
user : XIAPPLUSER
Use transaction SLDAPICUST if you wish to maintain the SLD server access data
Launching the SLD GUI in a separate browser window...
=> Verify in the browser GUI that the SLD is in a healthy running state!
Calling function LCR_LIST_BUSINESS_SYSTEMS
Retrieving data from the SLD server...
Function call terminated sucessfully
List of business systems maintained in the SLD:
 (...more...)
Calling function LCR_GET_OWN_BUSINESS_SYSTEM
Retrieving data from the SLD server...
No corresponding business system found for system XXX client 450
=> Check and maintain the SLD content for the current client
Summary: Connection to SLD works technically, but the SLD content may need maintenance
=> Check and maintain the SLD data content
*Unable to refresh cache contents.Error during last attempt to refresh cache" * this error is related with the RFC destination type HTTP. ( HTTP destination: INTEGRATION_DIRECTORY_HMI: do a test connection: result=500)

HTTP Response code 404 - RFC Adapter des not connect to Integration engine

Hi,
I seem to have problem with XI Integration engine. My integration process does not go beyond adapter engine and it fails with the following error,
Begining of the erorr report -
2006-01-23 13:35:53 Success RFC adapter received sRFC for ZSCEN2_XI from <sysno>/<client>. Attempting to send message synchronously
2006-01-23 13:35:54 Success Application attempting to send an XI message synchronously using connection AFW.
2006-01-23 13:35:55 Success Trying to put the message into the call queue.
2006-01-23 13:35:55 Success Message successfully put into the queue.
2006-01-23 13:35:55 Success The message was successfully retrieved from the call queue.
2006-01-23 13:35:55 Success The message status set to DLNG.
2006-01-23 13:35:55 Error Returning synchronous error notification to calling application: Received HTTP response code 404 : Not Found.
2006-01-23 13:35:55 Error Transmitting the message using connection http://<host>:55300/sap/xi/engine?type=entry failed, due to: Received HTTP response code 404 : Not Found.
2006-01-23 13:35:55 Error The message status set to FAIL.
2006-01-23 13:35:55 Error Returning to application. Exception: Received HTTP response code 404 : Not Found
end of error report -
and the runtime workbench does not connect to Integration engine and fails with the following error,
begin error report -
javax.ejb.CreateException: Unable to log on to system XID in language en with user XIRWBUSER
 at com.sap.aii.mdt.server.integrationengine.IntegrationEngineMonitoringBean.ejbCreate(IntegrationEngineMonitoringBean.java:374)
 at com.sap.aii.mdt.server.IntegrationEngineHomeImpl10.create(IntegrationEngineHomeImpl10.java:185)
 at com.sap.aii.mdt.server.IntegrationEngineHome_Stub.create(IntegrationEngineHome_Stub.java:56)
end of report -
Have anyone experienced the same issue?. Are we missing some post installation configuration?.
Thanks in advance
Regards,
Arul

HI Anulraja,
Your Adapter Engine searches the pipeline url of the integration engine from the SLD.
Check the Bussiness System in Sld , which you'll have defined for XI Server.
It should have ROLE : Integration Server And
pipeline url: http://ux0800:55300/sap/xi/engine?type=entry
should be this if your http port is 55300.
Check if this url is right in SLD-Bussiness System.
You can check the exact http port in transaction sxmb_adm.
Go to Integration engine configuration and then click on check icon(F7).
It should match with that provided in the BS in SLD.
By default it should be 8000.
Check all these things and then try.
Regards,
Yomesh

Large Messages fail on Integration Engine

Hello Guys!
I have an integration scenario with large messages going from ECC to XI (RFC -> XI -> JDBC) and these messages frequently fail on Integration Engine (inbound queue SYSFAIL).
1) Can't XI process large messages?
OR
2) Is there an integration engine configuration parameter that limits message size? (I think that's not the case, because sometimes I can manually restart a message that failed on a first attemp)
OR
3) Is there an integration engine configuration parameter that limits processing time of a message?
Thanks
Julio

Hi Julio,
i think you can click on the sysfail to get more info. Check as well SM21 for the error. Assumedly it was too much for Java Runtime and you should find a temporary down destination AI_RUNTIME_JCOSERVER.
SAP note 723909 shows how to tune JVM and increase Java Heap Size.
You should control if more than one msg leads to the error. If that is the case, may be a simple change of QOS to EOIO could solve the task to avoid more than one msg processing parallel. Reducing parallel JCO server threads would be similar strategy.
A direct Java Maping could be another idea. Message Mappings will be generated to Java with a quite huge source code, a direct written mapping could be more performant / stabil.
Regards,
Udo

PI Integration Engine RUNTIME LOGGING_SYNC for individual Interfaces

Hello Colleagues,
the Integration Engine Configuration parameter (SXMB_ADM) RUNTIME, LOGGING_SYNC, 0 is an global parameter and active for all sync. interfaces.
Is there a different configuration available/possible for control individual interfaces.
That means, we need to activate syc. logging for less important interfaces, for the rest interfaces (with high rate of transfer) disable logging.
Any suggestions?
Many thanks in advance!
Regards,
Jochen

Many thanks Amit and Shabarish,
for reply!
The Blog "XI/PI: Personalized logging & tracing" from Michal was already known.
Under "Error Analisys Settings" your are able to set only a less number of "conditions" like Username, Client, MessageID, QOS and QueueID. These conditions are not really usable to control individual interfaces.
Maybe .... If logging is deactivated then it can be reactivated with a message. To do this the logging tag in the diagnostic header of the message must be set to 1 .... this is a possible way for individual control of interfaces?
Regards,
Jochen

Generated Proxy Error: System not configured as XI Integration Engine

Dear all,
Using transaction SPROXY I generated a proxy on a Message Interface.
This generated as well a method and the associated class.
When I run it, trying to send data through all this, I get the following error:
System not configured as XI Integration Engine
Here is the model I got on another thread, in order to catch the error text:
DATA: l_sys_exception TYPE REF TO cx_ai_system_fault.
*...proxy call
catch CATCH CX_AI_SYSTEM_FAULT into l_sys_exception.
write: l_sys_exception->errortext.
Anyone has any idea where this error commes from?
I am mostly wondering whether the problem comes from my outbound system or XI configuration?
Thanks a lot, have a nice day!
Isa.

check this thread
https://forums.sdn.sap.com/click.jspa?searchID=2727912&messageID=1877263

Error: System not configured as Integration Engine

Hi ,
I was trying to simulate the following scenario in SAP XI:
HTTP--> SAP XI --> (RFC/BAPI)SAP R/3
Let me clear what i did.
I have to call a BAPI using RFC adapter in XI to display some information on a request of some Http app.
1. I have Imported the RFC BAPI into IR.
2. I have created the XSD files for http Re and res messages.
3. I have created the XSLT mapping programs and put them in a zip file and imported into IR.
4. I have created a Interface mapping and assign the created messages and mapping programs.
5. In ID i have created a Business service for my web application.
6. Receiver determination created in Id and Interface determination and receiver agreement in ID and activated the changes.
7. I have tested the same by sending the request from my web application to xi plain http adapter as follows:
http://grserver:8000/sap/xi/adapter_plain?bs=XIWS_web&namespace=urn%3Axi%3Asap%3Awebapp&interface=HTTP_out&qos=BE
and in the result i have got the following error:
"System not configured as Integration Engine"
but i have tried it many times and some times it gives me correct results but after that the same error ios coming.
so can you tell me what could be wrong in the configuration of XI of what is the solution for this problem.
Reagrds
Gopesh Kumar Agarwal

Hi,
What is the version of XI you are using? If u are usign XI2.0, ur URL is correct. But if you are using XI3.0 then use service=<SENDERSERVICE>instead of
bs=<SENDERSERVICE> parameter in your URL.
bs is replaced by service in XI3.0
Your URL will be http://grserver:8000/sap/xi/adapter_plain?service=XIWS_web&namespace=urn%3Axi%3Asap%3Awebapp&interface=HTTP_out&qos=BE
Hope this helps you.
Cheers,
Siva Maranani.
Message was edited by: siva maranani
Message was edited by: siva maranani

ERROR Integration Engine configuration

Similar Messages

Maybe you are looking for