Error : Interface mapping does not exist in runtime Cache

Hello Guys
I have a simple SOAP-To-RFC connection which was working fine until recently. I have not made any changes
but the data is not getting transfered from one point to another.
I checked SXMB_MONI and saw the following error:
Interface mapping http://cincom.com/config AddConfig does not exist in runtime cache
Then I went and checked SXI_CACHE and it says 'Cache contents are upto date' with a green light.
Just to be on the safer side, I shutdown and restarted XI server selecting All tasks.
But still has the same problem.
Can some one help me with this? I would really appreciate it.
Thanks
Ram

Hi,
We too faced the same problem.
Do the following
1) Delete the Interface mapping and re-create it
2) First test your Config with test tool
/people/paul.medaille/blog/2005/06/24/test-your-xi-configuration-with-the-new-test-tool
I think here you will find the error on Interface mapp or Receiver agreement
Then delete the interface det and receiver agreement also and re-create those.
Make sure that u have provided the sample payload which is taken from MONI--Inbound msg--Payload
Then finally u will get the success
Regards
Seshagiri

Similar Messages

Interface Mapping does not exist in runtime cache

Hi,
I have a scenario of RFC to SOAP, when I do the test I get the error message "Interface mapping http://sapxi.xxx.co.za/XXXXXX/ InterfaceMapping_Name does not exist in runtime cache"
Regards
Scharlotte

Hi...
Try to re-create the Interface mapping.
And also test your Configuration with test tool where you can find the error on which step.
if the error found in interface mapping.. do re-create the interface determination step and receiver agreement.
Provide the payload which is taken from sxmb_moni --> Inbound msg --> Payload
u can follow this blog for how to test configuration part:
Test Your XI Configuration With The New Test Tool
Regards,
Parvathy

Interface mapping Object does not exist in runtime cache

I am getting the following error after importing IR into our test system (PI7.0 SP10).
Interface mapping Object ID 19C3AC9D13B03787AEEB85169D0B6900 Software Component 8C51B2209F3C11DB94CEEB180DDF0074 does not exist in runtime cache Exception of class CX_XMS_SYSERR_MAPPING
You want to execute interface mapping Object ID 19C3AC9D13B03787AEEB85169D0B6900 Software Component 8C51B2209F3C11DB94CEEB180DDF0074 .     However,the data of this interface mapping is missing in the runtime cache. Activate the interface mapping in the Integration Repository.
I cannot change the mapping and reactivate - as this cannot be changed.
I have run SXI_Cache, Cleared SLD caches on IR and ID and run cacherefresh=full, but no luck!
The mapping is there and I can test it in the IR.
Any thoughts?

I had this problem today, maybe this helps someone when searching about this (at least this is the first hit at a very big search engine when searching for interface mapping does not exist...)
I have a RFC => PI => File scenario. I was aware that this would need to be asynchronous so I set up the message interface (service interface for PI > 7.0) as asynchronous inbound. This is the file receiver part of the interface.
Hints on the error: Audit Log in message details of RWB showed a line like this: RFC adapter received sRFC for ZMY_FM from <sender SID>/<sender client>. Attempting to send message synchronously. This of course could not work as file is asynchronous by default.
Bottom line however was, to make the call of the sender RFC asynchronous by using "in background task" like so:
CALL FUNCTION 'ZMY_FM'
   IN BACKGROUND TASK
   DESTINATION 'PI_DEST'
   EXPORTING
     t_file = lt_file.
COMMIT WORK.
Don't forget the commit work here.
Hope this helps.
Cheers
Jens

Error : DB Mapping does not exist for the Host in iSetup

Hi Experts,
We configured iSetup for migrating data from source to target, while configuring instance mapping has been completed successfully but while extracting data from source to target is showing below error :
Error : DB Mapping does not exist for the Host:<host name > with Two Task: TEST
EBS Version : 12.1.1 with 11.1.0.7 DB
OS : RHEL 5.3 x86_64
Any idea much Appreciated .
Thanks in advance,
Regards,
900076.

900076 wrote:
Hi Experts,
We configured iSetup for migrating data from source to target, while configuring instance mapping has been completed successfully but while extracting data from source to target is showing below error :
Error : DB Mapping does not exist for the Host:<host name > with Two Task: TESTIs this the complete/exact error message?
EBS Version : 12.1.1 with 11.1.0.7 DB
OS : RHEL 5.3 x86_64
Any idea much Appreciated .
http://docs.oracle.com/cd/E18727_01/doc.121/e12899/toc.htm
http://docs.oracle.com/cd/E18727_01/doc.121/e15842/toc.htm
Thanks,
Hussein

ESS Error - User id does not exist

Hi All,
When the user click on personal information - Emergency address link on the portal, user gets error "user XX does not exist in this period".
This proble is only for this particular user.
on the back end an abap dump with following error message is encountered.
Runtime Errors         OBJECTS_OBJREF_NOT_ASSIGNED_NO
Exception              CX_SY_REF_IS_INITIAL
Error in the ABAP Application Program
The current ABAP program "SAPLHRXSS_PER_MAC" had to be terminated because it
has
come across a statement that unfortunately cannot be executed.
I checked the data is maintained in IT0105 an IT0002 correctly. Even the table V_T7XSSPERSUBTYP has value for IT0006 with correct usecase.
The user has a hiring date of 13.07.2009 and IT0105 also has the start date as 13.07.2009 can this be the reason? Since the validity is not for complete month?
Please advise what could be the possible reason for the above error. How to solve the problem
Regards,
Swati

Hi,
you have to map the EP user to an employee at the backend for the ESS services to work.
Go to transaction HRUSER and check whether an employee is connected to this USER_ID. If it is not there, go to transaction pa30,select an employee and create a new record for the infotype 105 ( subtype 0001) with the USER_ID.
This will solve the issue.

Error: Selected disk does not exist (21) Module-SRE-700

Already tried everything that the recovery cisco commands, anyone have idea how to solve the problem of the print shown in print?
Initializing memory #2. Please wait...
This may take a minute....
Serial ATA Port 0 : Hitachi HTE545050B9A300
DDR Memory 4096 MB detected
Intel(R) Core(TM)2 Solo CPU    L3400 @ 1.86GHz
BIOS SM 3.52.8, BIOS Build date: 02/08/2011
System now booting...
Please wait...
Please press P to select Primary Boot Loader ...
          or S to select Secondary Boot Loader ...
          or wait to boot from default configuration ...
Now booting from primary boot loader....
Authenticating boot loader....
Primary Boot Loader Authenticated - booting....
ServicesEngine boot-loader> install_key waas-accelerator-4.4.5c.4-k9.bin
Keyfile Size 202814577 over limit 32768 will not burn into flash
ServicesEngine boot-loader> verify
Loading disk:/bzImage ... Unable to load image
Error: Selected disk does not exist (21)
Unable to boot image
Unrecognized command
ServicesEngine boot-loader>
#service-module sm 1/0 session
Trying 172.20.245.1, 2067 ... Open
Please wait...
Please press P to select Primary Boot Loader ...
          or S to select Secondary Boot Loader ...
          or wait to boot from default configuration ...
Now booting from primary boot loader....
Authenticating boot loader....
Primary Boot Loader Authenticated - booting....
Please enter '***' to change boot configuration:
Trying to reset Service Module SM1/0.
May 7 11:27:33.055: %SRE_SM-6-STATE_CHANGE: SM1/0 changing state from SERVICE_MODULE_STATE_ERRQ to SERVICE_MODULE_STATE_SHDN
Initializing memory #1. Please wait...
Initializing memory #2. Please wait...
This may take a minute....
Serial ATA Port 0 : Hitachi HTE545050B9A300
DDR Memory 4096 MB detected
Intel(R) Core(TM)2 Solo CPU    L3400 @ 1.86GHz
BIOS SM 3.52.8, BIOS Build date: 02/08/2011
System now booting...
Please wait...
Please press P to select Primary Boot Loader ...
          or S to select Secondary Boot Loader ...
          or wait to boot from default configuration ...
Now booting from primary boot loader....
Authenticating boot loader....
Primary Boot Loader Authenticated - booting....
Please enter '***' to change boot configuration:
Detect and Initialize network device
Backup current platform configurations....
SRE step 1 - SM registration...
Finding (hd1,3)/296e03bc-3236-4a68-a178-688e56400a1e, failed
Local install not supported
Response - no installation needed (len: 422)
SRE Installation Not Needed
Restoring orignial configuration...
Updating flash with bootloader configuration.
Please wait ................... done.
May 7 11:29:03.331: %SM_INSTALL-6-INST_RBIP: SM1/0 received msg: RBIP Registration RequestLoading disk:/bzImage ... Unable to load image
Error: Selected disk does not exist (21)
Unable to boot image
þ
Initializing memory #1. Please wait...
Initializing memory #2. Please wait...
This may take a minute....
Serial ATA Port 0 : Hitachi HTE545050B9A300
DDR Memory 4096 MB detected
Intel(R) Core(TM)2 Solo CPU    L3400 @ 1.86GHz
BIOS SM 3.52.8, BIOS Build date: 02/08/2011
System now booting...
Please wait...
Please press P to select Primary Boot Loader ...
          or S to select Secondary Boot Loader ...
          or wait to boot from default configuration ...
Now booting from primary boot loader....
Authenticating boot loader....
Primary Boot Loader Authenticated - booting....
Please enter '***' to change boot configuration:
Detect and Initialize network device
Backup current platform configurations....
SRE step 1 - SM registration...
Finding (hd1,3)/296e03bc-3236-4a68-a178-688e56400a1e, failed
Local install not supported
Response - no installation needed (len: 422)
SRE Installation Not Needed
Restoring orignial configuration...
Updating flash with bootloader configuration.
Please wait ................... done.
May 7 11:30:31.339: %SM_INSTALL-6-INST_RBIP: SM1/0 received msg: RBIP Registration RequestLoading disk:/bzImage ... Unable to load image
Error: Selected disk does not exist (21)
Unable to boot image
ú
Initializing memory #1. Please wait...
Initializing memory #2. Please wait...
This may take a minute....
Serial ATA Port 0 : Hitachi HTE545050B9A300
DDR Memory 4096 MB detected
Intel(R) Core(TM)2 Solo CPU    L3400 @ 1.86GHz
BIOS SM 3.52.8, BIOS Build date: 02/08/2011
System now booting...
Please wait...
Please press P to select Primary Boot Loader ...
          or S to select Secondary Boot Loader ...
          or wait to boot from default configuration ...

Hi,
Opened a tac and managed to get the resolution of the problem. For those with the same problem reported by me above just follow the procedure below:
1. uninstall existing SRE-V software
http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/sre_v/1.5/user/guide/software.html#wp1055364
2. run sm-hw-util to set sata mode to IDE
http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/sre_v/1.5/user/guide/software.html#wp1091438
3. configure a static, 32bit route to point the service module IP address to the SM slot/0 interface
ip route 255.255.255.255 SM slot/0
4. install WAAS:
http://www.cisco.com/en/US/docs/app_ntwk_services/waas/waas/v421/module/installation/guide/wssmcfg.html#wp47040
http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/sre_v/1.5/user/guide/software.html#wp1091438

Error ACLContainer: 65315 does NOT EXIST in the Object Cache for parentID:

Expert,
I did the following steps to upgrade the OWB repository from 10g to 11g
• Created a dummy workspace in the 11.2 repository
• Created users in the destination environment
• Run Repository Assistant against the 11.1 source database
• Then selected *“Export entire repository to a file”* and selected the MDL(10g) to import
After 99% of completing I have got the below error
Error ACLContainer: 65315 does NOT EXIST in the Object Cache for parentID: 65314
Please let me know the solution.
Thanks,
Balaa...

Hi I had the same error and worked on it for almost a week with no success but there is few work around for this try it it might work for you.
Step 1>Run a health check on OWB 10.2 enviroment(make sure you clone your OWB 10.2 enviroment and then do this healthcheck ,these checks are tricky )
refer
Note 559542.1 Health Check of the Oracle Warehouse Builder 10.2 Metadata Repository
This will give you info about your missing ACL
Step 2> download these two scripts fixLostACLContainer.sql ,fixAllACLContainers.sql
please refer :
Note 559542.1 Health Check of the Oracle Warehouse Builder 10.2 Metadata Repository
OWB 10.2 - Internal ERROR: Can not find the ACL container for object (Doc ID 460411.1)
Note 754763.1 Repository Cleanup Script for OWB 10.2 and OWB 11.1
Note 460411.1 Opening Map Returns Cannot find ACL Containter for Object
Note 1165068.1 Internal Error: Can Not Find The ACL Containter For for object:CMPPhysical Object
It might resolve this ACL issue but it did not work for me.
If none of these work then
Perform export from design center of OWB 10.2 and import through design center of OWB 11.2.(ONLY OPTION)
It worked for me.
Varun

Transporting Process Chain - error Source system does not exist

Hi,
I tried to transport a local PC by itself (not including its main meta chain) since I have only done modifications in the local PC only. In the PC, there are PSA Processing, ODS Processing, ODS Activation, ABAP Program w/ variants and Infocube Rollup.
However, I got the following transport error: Source system does not exist
=======
Diagnosis
Source system is not known.
System Response
The imported data for DataSource was deleted again because the referenced source system does not exist and no mapping is defined in table RSLOGSYSMAP on an existing productive source system.
Procedure
Create the referenced source system in the Data Warehousing Workbench or define mapping to a known source system in table RSLOGSYSMAP.
You get to maintenance using Tools -> Conversion of the logical system names.
============
I have checked at the table RSLOGSYSMAP and all source system mappings are in order.
And the weird thing is, upon checking the PC itself in the transport-to box, I can activate it without any error.
FYI, we are currently upgrading to BI Accelerator. Am not sure if this could be one of the reasons.
Any inputs and tips are highly appreciated and will be rewarded with points accordingly.
Thanks

Hi,
This error is due to the fact that the
mapping table for the after import (RSLOGSYSMAP) is not correct maintained in PB7 system.
You need to maintain table RSLOGSYSMAP in each system
You can find the steps to do it in the attached note 127326:
o Maintain table 'RSLOGSYSMAP' in the target BW with view
   'V_RSLOGSYSMAP' and enter as 'original source system' the logical name of the source system in the source BW and as 'target source system' the logical name of the source system in the target BW.
   This maintenance is required since it allows the correct source system reference of the InfoSources to be transported.
This source system reference in turn is absolutely necessary to activate the transfer structure.
   Example:
   Source BW with source system AAA.
   Target BW with source system BBB where the source system AAA
   corresponds to the source system BBB.
   Entry in RSLOGSYSMAP in the target BW:
   Original source system: AAA, target source system: BBB.
   Give the DDIC user in the source BW in client 000 the
   authorization profile S_RS_ALL to create BW objects.
Cheers
Rajesh

Error: Requested resource does not exist with SAP WebAS..deployed an ear

hi,
i deployed an application using SDM gui deployement manger.   the application is built using struts,spring etc. I have also created a datasource with Oracel 9i succesfully and hav associated it with the application.
When i try to access the application using the struts based path i get an "<b>ERROR 404:- Error: Requested resource does not exist</b>". I also tried accessing the index.jsp page directly without struts paths but dont know why i get an error "<b>File [appContext/admin/index.jsp] not found in application root of alias [/] of J2EE application [sap.com/com.sap.engine.docs.examples].</b>"
The same ear is working perfectly fine with IBM WSAD but not in SAP Web AS ?? is there any configuration issues that i need to address ?? Kindly help me ASAP !!
Regards,
Vaibhav

Hi,
The Required server log contents are as follows:-
#1.5#000CF1AFC124017A000000020000067000041B1D550F525C#1155712701853#com.sap.engine.services.servlets_jsp.server.jsp.JSPParser#sap.com/doculine#com.sap.engine.services.servlets_jsp.server.jsp.JSPParser#Guest#2####661184d02cf711db80fa000cf1afc124#SAPEngine_Application_Thread[impl:3]_37##0#0#Error#1#/System/Server#Plain###Runtime error in compiling of the JSP file <C:/usr/sap/J2E/JC00/j2ee/cluster/server0/apps/sap.com/doculine/servlet_jsp/doculine/root/admin/login.jsp> !
The error is: com.sap.engine.services.servlets_jsp.server.jsp.exceptions.ParseException: TagLibValidator returns error(s) for taglib [/WEB-INF/c.tld]: [
     com.sap.engine.lib.xml.parser.NestedSAXParserException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException: Unsupported character: a9(:main:, row:739, col:23)(:main:, row=739, col=23) -> com.sap.engine.lib.xml.parser.ParserException: Unsupported character: a9(:main:, row:739, col:23)
Exception id: [000CF1AFC124017A000000000000067000041B1D550F4D94]#
#1.5#000CF1AFC124017A000000030000067000041B1D550F5C88#1155712701868#com.sap.engine.services.servlets_jsp.client.RequestInfoServer#sap.com/doculine#com.sap.engine.services.servlets_jsp.client.RequestInfoServer#Guest#2####661184d02cf711db80fa000cf1afc124#SAPEngine_Application_Thread[impl:3]_37##0#0#Error##Plain###Processing HTTP request to servlet [action] finished with error. The error is: com.sap.engine.services.servlets_jsp.server.exceptions.WebIOException: Internal error while parsing JSP page [C:/usr/sap/J2E/JC00/j2ee/cluster/server0/apps/sap.com/doculine/servlet_jsp/doculine/root/admin/login.jsp].
     at com.sap.engine.services.servlets_jsp.server.jsp.JSPParser.parse(JSPParser.java:117)
     at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.getClassName(JSPServlet.java:238)
     at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.compileAndGetClassName(JSPServlet.java:429)
     at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:169)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:316)
     at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:372)
     at org.apache.struts.action.RequestProcessor.doForward(RequestProcessor.java:1063)
     at org.apache.struts.action.RequestProcessor.internalModuleRelativeForward(RequestProcessor.java:1001)
     at org.apache.struts.action.RequestProcessor.processForward(RequestProcessor.java:560)
     at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:209)
     at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1194)
     at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:414)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:316)
     at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:372)
     at org.apache.struts.action.RequestProcessor.doForward(RequestProcessor.java:1063)
     at org.apache.struts.action.RequestProcessor.processForwardConfig(RequestProcessor.java:386)
     at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:229)
     at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1194)
     at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:414)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: com.sap.engine.services.servlets_jsp.server.jsp.exceptions.ParseException: TagLibValidator returns error(s) for taglib [/WEB-INF/c.tld]: [
     com.sap.engine.lib.xml.parser.NestedSAXParserException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException: Unsupported character: a9(:main:, row:739, col:23)(:main:, row=739, col=23) -> com.sap.engine.lib.xml.parser.ParserException: Unsupported character: a9(:main:, row:739, col:23)
     at com.sap.engine.services.servlets_jsp.server.jsp.JSPParser.validate(JSPParser.java:243)
     at com.sap.engine.services.servlets_jsp.server.jsp.JSPParser.initParser(JSPParser.java:348)
     at com.sap.engine.services.servlets_jsp.server.jsp.JSPParser.parse(JSPParser.java:105)
     ... 37 more
#1.5#000CF1AFC124017A000000050000067000041B1D550F5F94#1155712701868#com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl#sap.com/doculine#com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl#Guest#2####661184d02cf711db80fa000cf1afc124#SAPEngine_Application_Thread[impl:3]_37##0#0#Error#1#/System/Server/WebRequests#Plain###Processing HTTP request to servlet [action] finished with error.
The error is: com.sap.engine.services.servlets_jsp.server.exceptions.WebIOException: Internal error while parsing JSP page [C:/usr/sap/J2E/JC00/j2ee/cluster/server0/apps/sap.com/doculine/servlet_jsp/doculine/root/admin/login.jsp].
Exception id: [000CF1AFC124017A000000030000067000041B1D550F5C88]#

Error "Service EMPLOYEE_ORGCHART_SERVICE does not exist." in ESS.

We are on mySAP ERP 2004, and using ESS 60.2 version.
In the "Employee search" workset when I search for an employee it displays his last name, first name, positon, org unit, job, and some other stuff....Every thing is working great except for.........in the results that are dispalyed when a search is performed, I click on the orgunit that a particular employee belongs to, and its throwing me the following error
"Service EMPLOYEE_ORGCHART_SERVICE does not exist".
Has anyone come across this?
Any suggestions on how to fix this is highly appreciated with points.

Hello John,
The links in SAP ESS Applications are built at runtime. The configuration for these links and the complete ESS/MSS Menu has been provided in the IMG in the backend(For ERP 2004). I do not remember the IMG Path. But yes you need to maintain the entries for Orgchart in the following views. Most probably they will be missing.
Check if there is an entry in the following view V_T7XSSSERSRV in your backend client.
Service Short Key - EMPLOYEE_ORGCHART_SERVICE
If its not there then you need to create one entry like this:
Service Link Text    Orgchart
Service Type         WebDynpro application
Link Resource       EMPLOYEE_ORGCHART_SERVICE
Then goto view V_T7XSSSERRES and check if there is a Resource Object Key as EMPLOYEE_ORGCHART_SERVICE.
This entry will have following details if its exists(else create with following details):
Resource Key         EMPLOYEE_ORGCHART_SERVICE
Description     Orgchart
Server
Directory Path sap.com/ess~org
Object Name     Orgchart
URL Parameter
Window Name          Orgchart
Window Properties
URL for PCD Page:
ROLES://portal_content/com.sap.pct/every_user/com.sap.pct.erp.ess.bp_folder/com.sap.pct.erp.ess.pages/com.sap.pct.erp.ess.employee_search/com.sap.pct.erp.ess.orgchart
After maintaining these entries it should work.
Regards,
Shubham

Interface Controller does not exist

Having implemented Compliance Calibrator 5.3, I've configured the JCo and am getting the following error message below.
WARNING: *** Job Exception: Interface Controller does not exist for Component Instance VirsaXSR3_02 in Component Usage VirsaXSR3_02
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Interface Controller does not exist for Component Instance VirsaXSR3_02 in Component Usage VirsaXSR3_02
I have searched the forum and found only one other message pertaining to this issue. I need to figure out how to address this error. Here is what I have done already:
1. Tested the JCo - it tested and pinged properly
2. Tested the RTA user - the user has the necessary authorizations
I'm considering deleting and recreating the connector, but I don't see the point as the connector obviously connects to the backend. I know this because I had some RFC errors that disappeared when I granted the authorizations to the user specified in the JCo.
Please let me know.
Thanks,
Santosh

Here you go.
Row     VSYSKEY SYSNAME SYSTYPE SYSCON1 SYSCON2 SYSCON3 SYSCON4 SYSCON5 STATUS MGMTRLVNT       SYSCON6 SYSCON7 SYSCON8 SYSCON9 EXTOBJ
1       SANDBOX1        SB1     SAP     JCO     VIRSAXSR3_01_MODEL      VIRSAXSR3_01_METADATA   JAVA            0       0       rdgspd2s                                N
2       SB3     SANDBOX3        SAP     JCO     VIRSAXSR3_03_MODEL      VIRSAXSR3_03_METADATA   JAVA            0       0       rdgspd2s                                N
3       SANDBOX2        SB2     SAP     JCO     VIRSAXSR3_02_MODEL      VIRSAXSR3_02_METADATA   JAVA            0       0       rdgspd2s                                N
4       SANDBOX Sandbox environments    LSYS    SANDBOX SANDBOX                         0       1
5       SB2_RE SB2_RE SAP     JCO     VIRSAXSR3_01_MODEL      VIRSAXSR3_01_METADATA   JAVA            0       0       rdgspd2s                                N

HTTP Error 404 :File does not exist

Hi all,
On Test instance we are not able to open the help file,it give an error
HTTP Error 404 :File does not exist
can anybody have solution for this
it's very urgent
Thanks
shekhar

I have changed the note server definition in the external app to add the mail directory in front of the mail file name 'mail/mufile.nfs' and I get the following error:
05/04/21 15:15:07 lotusnotes: [instance=(null), id=97176201941,7] ERROR: LotusServiceSession: getConfigProperties(): An error occured
while reading/ retrieving the properties from the the configuration file.
05/04/21 15:15:07 lotusnotes: [instance=(null), id=97176201941,7] ERROR: Unhandled exception in SOAP call
oracle.portal.provider.v2.ProviderException: LotusServiceSession: getConfigProperties(): An error occured while reading/ retrieving the
properties from the the configuration file.

Excise Invoice creation error -Billing document does not exists

Dear Experts,
I have created supplementary sales order, billing with refernece through sales order by VF01.
Now I want to create Excise Invoice but system gives error Billing Document does not exists
I have checked billing document in VBRK table & it is showing in table.
My item categroy is L2N -and set it to C
I have assigned Billing type under Outgoing excise invoice ->Assign billing type to delivery type still my excise invoice is not generating.
Pl. guide me.
Thanks
Trupti

Resolved my problem.
Actually in Billing item categroy if you put SD Doc. Catg. as M you can do excise invoice even if you have not created the
outbound delivery.
So cycle will be Supplementary Sales Order->VF01 with ref. to SO->J1IIN -Excise invoice creation.
Thanks to all.
Trupti.

Error "Item 000010 does not exist" while creating sales order in VA01

Dear All,
As per customer requirement we are trying to validate shipping data( item level) and unloading point( item level) by customer enhancement.
Enhancement:       V45A0003
Function Module:    EXIT_SAPMV45A_003
INCLUDE:                ZXVVAU05
Inside include we have written validation code that if user enters any wrong value for shipping data or unloading data
system will throw error message accordingly.
It is working fine and we are getting error message if wrong shipping data or unloading data is entered.
But after the error message is displayed if we try to save the sales order again system throws a STOP message as a POPUP
saying "Item 000010 does not exist".
Now,if we enter proper shipping data or unloading data and try to save the salesorder it is throwing error "Item 000010 does not exist"..
Please let me know your valuable input on this.
Regards
Arindam
Edited by: Arindam Ganguly on Mar 11, 2010 1:55 PM

It sounds like your error routine has prevented the insertion of the data in VBAP or XVBAP internal tables. Therefore, upon return to the screen and SAVE, SAP is examining the VBAP or XVBAP table, comparing to the 'I' index table probably, and finding that there is supposed to be an item 10, but it's not in the necessary table(s).    This may be resulting because your internal tables are now inconsistent.
Look at where your inserted error coding is occurring...you may want to move that to the SAVE_DOCUMENT_PREPARE routine in MV45AFZZ, so that everything will have been built, and a final check of the content will stop the sales order save until the data is corrected.
Edited by: Breakpoint on Mar 11, 2010 3:29 PM

Sales Order Error Message 'Product does not exist in system'

Hi Gurus,
we recently upgraded from CRM 4 to 7.0. There is a ECC attached (which was also upgraded from 4.7 to 6.0 before).
Scenario: materials are replicatd from ECC to CRM. All mandatory customizing objects were initially loaded succesfully.
Because of the upgrade we already have "old" products in CRM. We requested a single product from ECC, the bdoc went through with green. The product can be found via commpr01 and also on database in comm_product. But when try to add the product to an sales order e.g. quotation, it gives the error message "product does not exist in the system.
We then tried to delete that product using the report com_product_delete_single. When entered the selection criteria for that report, we used the f4-valuehelp to enter the product. We found the product and then executed the report. But gives the message 'product not found'.
We also created a product for testing purposes directly in crm, but it shows the same behaviour in sales orders and for the deletion report.
Please help me with that issue. Your help will be highly appreciated!!!
Kind regards
Hannes

Solved with the help of SAP.
Keywords: COM_PRODUCT
COM_PRODUCT_GUID_GET_INTERNAL
CONVERSION_EXIT_PRID1_INPUT
CRM_ORDERADM_I 501
Relevant notes:
Note 1449146 - Dump While Creation IP via WebUI
Note 1445079 - Unable to add products to contract
The notes do not exactly described our issue but the code corrections were still relevent for us.

Error : Interface mapping does not exist in runtime Cache

Similar Messages

Maybe you are looking for