Error internet explorer 9 later version exists internet exploxer 7

Getting an error when I try to upgrade Internet Explorer 9 on laptop HP Pavilion dv6 running Windows 7 64 bit SP1. Error message: there is a later version on computer???? Also having crashing issues when trying to run MMC snap-in

I just started having the same problem.
I was creating a new VM in Vsphere from our 2008 R2 SP1 image and it hasn't been updated and repacked in a while, so i have to install about 60 updates, including IE9.
I went through my normal setup as i had just created 2 VMs and updated them on Monday with no problem.
I got the same error code as you. The install looks like it installed IE9, but the update is still showing up as available in Windows Update.
I deleted the VM, created a new one, chose all updates except IE, then did that and it still shows up again.
Then i deleted the VM, installed just IE 9 and it still shows up as available on reboot.
I have a script that i can use to reset/clear WSUS cache on the computer, (Software distribution folder, and the windows update log, and recreates a certificate), so i tried that and then rebooted and it still showed up.
I then decide ok, maybe the Image got messed up somehow, so i started creating a new 2008 R2 install from scratch last night and chose to update just IE9 as the first install. I did that, rebooted and it didn't show up in Windows Updates, so i though GREAT.
I proceed to kick off the 100+ downloads needed before i left and left the console up.
When i got in to work this morning, the updater seemed stuck on 31 of 102 updates, this one in particular: KB288516. I rebooted the computer, because it wouldn't stop and just seemed stuck since last night, which these updates should only have taken about
an hour to install at most. I log back in and sure enough, it now shows Internet Explorer 9 at the bottom of the update list as being needed for install.
I believe this is Patch Tuesday week, so maybe they screwed up something with the Windows Update detection engine, because it worked fine on Monday when i had to update IE9 on 2 VMs that i created.

Similar Messages

Trying to install Adobe Acrobat Pro XI, get error message that a later version is already installed

Installing Acrobat Pro on a new laptop. At download point get message " Setup has detected that you already have a higher version product installed. Setup will now terminate." Acrobat Pro is NOT already installed, in any version. What is issue?

uninstall any acrobat and reader versions already installed.
if you're using windows, clean Download Adobe Reader and Acrobat Cleaner Tool - Adobe Labs
then reinstall.

Error in Integration Scenario: No software Component version exists

Hi Experts,
We have external product and software component like Product "Project Management" we have imported the CIM content for it
Now when we create an Application Component for the same in Integration Scenario in ESR (PI7.1)
while trying to do right click --> Edit Action it gives Error
"" No imported software component version exists for product"
Also note that it allows us to Add new Action there
that is we can right click --> Add action
Kindly help with your suggestions to resolve this << Moderator message - Everyone's problem is important >>.
Regards,
Jagadish
Edited by: Rob Burbank on Nov 10, 2010 3:56 PM

Hi Experts,
Tried the steps given in SAP Note: 768148
Still it is not resolved.
I appraiciate if any one suggest some more options to resolve this.
Regards,
Jagadish

Error while run OAF, HTTP 500 - Internal server error Internet Explorer

I have installed R12 on my laptop having windows 2003 Server, which running successfully.
In Same machine i have installed Jdeveloper for OAF customization by following 416708.1.
While running test OAF page from Jdev, following error accruing. I have Run autoconfig as well.
There is a problem with the page you are trying to reach and it cannot be displayed.
Please try the following:
Open the r12.oracle.com:8988 home page, and then look for links to the information you want.
Click the Refresh button, or try again later.
Click Search to look for information on the Internet.
You can also see a list of related sites.
HTTP 500 - Internal server error
Internet Explorer

What is the JDev version?
Check if the below fixes the issue.
Go to Tools -> Embedded OC4J Server Preferences-> Global -> Startup. Select the option -> Default Local IP Address.
Thanks
Shree

When runnning any form i get the error Internet Explorer has encountered ..

Hello allllllllll...
When runnning any form i get the error Internet Explorer has encountered a problem and needs to close.We are sorry for the inconvenience.
Any help pls.
Abdetu..

Thanks Sim for reply
I went to the pass :
C:\Developer10\j2ee\DevSuite\application-deployments\forms
then found a log file with each log in occured i got 4 today the following logged transaction:
08/01/01 10:48:36 Started
08/01/01 10:55:16 forms90web: jsp: init
08/01/01 10:55:16 forms90web: f90servlet: init
08/01/01 10:55:17 forms90web: FormsServlet init():
configFileName: c:\Developer10/forms90/server/formsweb.cfg
testMode: false
08/01/01 10:55:17 forms90web: 9.0.4.0.0 Started
08/01/01 12:51:43 forms90web: 9.0.4.0.0 Stopped
08/01/01 12:51:43 Stopped (Shutdown executed by jazn.com/admin from 127.0.0.1 (localhost))
08/01/01 12:51:53 Started
08/01/01 12:52:04 forms90web: jsp: init
08/01/01 12:52:04 forms90web: f90servlet: init
08/01/01 12:52:04 forms90web: FormsServlet init():
configFileName: c:\Developer10/forms90/server/formsweb.cfg
testMode: false
08/01/01 12:52:04 forms90web: 9.0.4.0.0 Started
08/01/01 12:52:41 forms90web: 9.0.4.0.0 Stopped
08/01/01 12:52:41 Stopped (JVM termination)
08/01/01 12:56:42 Started
08/01/01 12:58:32 forms90web: jsp: init
08/01/01 12:58:32 forms90web: f90servlet: init
08/01/01 12:58:32 forms90web: FormsServlet init():
configFileName: c:\Developer10/forms90/server/formsweb.cfg
testMode: false
08/01/01 12:58:32 forms90web: 9.0.4.0.0 Started
========================================================
But unfortunitly i can't invistigate anything..?!!!
This error raised not only on my pc but to each co-worker with me ..
i have no reason 4 what's going on..
================================================
any suggestions will be appreciated..
Abdetu..
===========================

Firefox 3.6.8 is not connecting to internet on my windows xp desktop. It is happening with all the later versions after 3.6 release.

firefox 3.6 is connecting to internet .
If it updates to later versions , stopped connecting to internet.
I tried with 3.6.8 and 3.6.9 versions.

Which firewall are you using?
[http://support.mozilla.com/en-US/kb/Firewalls]

Internet explorer 6 standalone version

Does anyone know where i can get "internet explorer 6
standalone version"?
If anyone has any links or advice on this it would be good
thanks

Simon2k7 schrieb:
> Does anyone know where i can get "internet explorer 6
standalone version"?
> If anyone has any links or advice on this it would be
good
Have a look here
http://tredosoft.com/Multiple_IE
Good luck
Paul

Does Internet Explorer (specifically a version 7 through 9) work on a MAC 10.8.4? I would like to access documents from my work that are only supported on Internet Explorer.

Does Internet Explorer (specifically a version 7 through 9) work on a MAC 10.8.4? I would like to access documents from my work that are only supported on Internet Explorer.

Joni2b wrote:
...I would like to access documents from my work that are only supported on Internet Explorer.
I don't know how successfully this will be but you can turn on the Developer menu (Advanced tab in preferences) in Safari and change the User Agent to trick the documents into thinking you're using IE. You can also do that by adding the User Agent Switcher extension to Firefox.
Otherwise, you need to run Windows in BootCamp, as a Windows Virtual Machine in software such as VMware Fusion, Parallels, or Virtual Box, or the Windows environment of CrossOver Mac, as Niel says.

Standard version og gmail will not load, although it will on Internet Explorer. HTML version works OK.

Standard version of gmail will not load, although it will on Internet Explorer. HTML version works OK.

When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
1. Clear Firefox's Cache
orange Firefox button ''or'' Tools menu > Options > Advanced
On the Network mini-tab > Offline Storage : "Clear Now"
2. If needed, delete your google.com cookies here
While viewing a page on the site, right-click and choose View Page Info > Security > "View Cookies"
Then try reloading the page. Does that help?

An error occurred during local report processing.The definition of the report '' is invalid.The definition of this report is not valid or supported by this version of Reporting Services. he report definition may have been created with a later version of R

Hi,
I am trying to create rdlc file programmatically. Using Memory Table as dataset. Here is my code
' For each field in the resultset, add the name to an array listDim m_fields AsArrayList
  m_fields = NewArrayList()
  Dim i AsIntegerFor i = 0 To tbdataset.Tables(0).Columns.Count - 1
      m_fields.Add(tbdataset.Tables(0).Columns(i).ColumnName.ToString)
  Next i
  'Create Report 'http://schemas.microsoft.com/sqlserver/reporting/2008/01/reportdefinition'http://schemas.microsoft.com/sqlserver/reporting/2010/01/reportdefinition' Open a new RDL file stream for writingDim stream AsFileStream
  stream = File.OpenWrite("D:\MyTestReport2.rdlc")
  Dim writer AsNewXmlTextWriter(stream, Encoding.UTF8)
  ' Causes child elements to be indented
  writer.Formatting = Formatting.Indented
  ' Report element
  writer.WriteProcessingInstruction("xml", "version=""1.0"" encoding=""utf-8""")
  writer.WriteStartElement("Report")
  writer.WriteAttributeString("xmlns", Nothing, "http://schemas.microsoft.com/sqlserver/reporting/2010/01/reportdefinition")
  writer.WriteAttributeString("xmlns:rd", "http://schemas.microsoft.com/SQLServer/reporting/reportdesigner")
  writer.WriteStartElement("ReportSections")
  writer.WriteStartElement("ReportSection")
  writer.WriteElementString("Width", "11in")
  writer.WriteStartElement("Body")
  writer.WriteElementString("Height", "5in")
  writer.WriteStartElement("ReportItems")
  writer.WriteStartElement("Tablix")
  writer.WriteAttributeString("Name", Nothing, "Tablix1")
  writer.WriteElementString("Top", ".5in")
  writer.WriteElementString("Left", ".5in")
  writer.WriteElementString("Height", ".5in")
  writer.WriteElementString("Width", (m_fields.Count * 1.5).ToString() + "in")
  writer.WriteStartElement("TablixBody")
  ' Tablix Columns
  writer.WriteStartElement("TablixColumns")
  ForEach fieldName In m_fields
      writer.WriteStartElement("TablixColumn")
      writer.WriteElementString("Width", "1.5in")
      writer.WriteEndElement() ' TableColumnNext fieldName
  writer.WriteEndElement() ' TablixColumns' Header Row
  writer.WriteStartElement("TablixRows")
  writer.WriteStartElement("TablixRow")
  writer.WriteElementString("Height", ".25in")
  writer.WriteStartElement("TablixCells")
  ForEach fieldName In m_fields
      writer.WriteStartElement("TablixCell")
      writer.WriteStartElement("CellContents")
      writer.WriteStartElement("Textbox")
      writer.WriteAttributeString("Name", Nothing, "Header" + fieldName)
      ' writer.WriteAttributeString("CanGrow",  True)' writer.WriteAttributeString("Keeptogether", True)
      writer.WriteStartElement("Paragraphs")
      writer.WriteStartElement("Paragraph")
      writer.WriteStartElement("TextRuns")
      writer.WriteStartElement("TextRun")
      writer.WriteElementString("Value", fieldName)
      writer.WriteStartElement("Style")
      writer.WriteElementString("TextDecoration", "Underline")
      writer.WriteElementString("PaddingTop", "0in")
      writer.WriteElementString("PaddingLeft", "0in")
      writer.WriteElementString("LineHeight", ".5in")
      ''writer.WriteElementString("Width", "1.5in")''writer.WriteElementString("Value", fieldName)
      writer.WriteEndElement() ' Style
      writer.WriteEndElement() ' TextRun
      writer.WriteEndElement() ' TextRuns
      writer.WriteEndElement() ' Paragraph
      writer.WriteEndElement() ' Paragraphs
      writer.WriteEndElement() ' TexBox
      writer.WriteEndElement() ' CellContents
      writer.WriteEndElement() ' TablixCellNext
  writer.WriteEndElement() ' TablixCells
  writer.WriteEndElement() ' TablixRow'writer.WriteEndElement() ' TablixRows          Do not close Rows tag here colse it after details'End of Headers'Details Rows'writer.WriteStartElement("TablixRows")         Since Rows tag in header is not closed not need to open fresh tag
  writer.WriteStartElement("TablixRow")
  writer.WriteElementString("Height", ".25in")
  writer.WriteStartElement("TablixCells")
  ForEach fieldName In m_fields
      writer.WriteStartElement("TablixCell")
      writer.WriteStartElement("CellContents")
      writer.WriteStartElement("Textbox")
      writer.WriteAttributeString("Name", Nothing, fieldName)
      '  writer.WriteAttributeString("CanGrow", True)'  writer.WriteAttributeString("Keeptogether", True)
      writer.WriteStartElement("Paragraphs")
      writer.WriteStartElement("Paragraph")
      writer.WriteStartElement("TextRuns")
      writer.WriteStartElement("TextRun")
      'writer.WriteElementString("Value", fieldName)
      writer.WriteElementString("Value", "=Fields!" + fieldName + ".Value")
      writer.WriteStartElement("Style")
      writer.WriteElementString("TextDecoration", "Underline")
      writer.WriteElementString("PaddingTop", "0in")
      writer.WriteElementString("PaddingLeft", "0in")
      writer.WriteElementString("LineHeight", ".5in")
      ''writer.WriteElementString("Width", "1.5in")''writer.WriteElementString("Value", fieldName)
      writer.WriteEndElement() ' Style
      writer.WriteEndElement() ' TextRun
      writer.WriteEndElement() ' TextRuns
      writer.WriteEndElement() ' Paragraph
      writer.WriteEndElement() ' Paragraphs
      writer.WriteEndElement() ' TexBox
      writer.WriteEndElement() ' CellContents
      writer.WriteEndElement() ' TablixCellNext
  writer.WriteEndElement() ' TablixCells
  writer.WriteEndElement() ' TablixRow
  writer.WriteEndElement() ' TablixRows'End of Details Rows
  writer.WriteEndElement() ' TablixBody
  writer.WriteStartElement("TablixRowHierarchy")
  writer.WriteStartElement("TablixMembers")
  writer.WriteStartElement("TablixMember")
  ' Group
  writer.WriteElementString("KeepWithGroup", "After")
  writer.WriteEndElement() ' TablixMember' Detail Group
  writer.WriteStartElement("TablixMember")
  writer.WriteStartElement("Group")
  writer.WriteAttributeString("Name", Nothing, "Details")
  writer.WriteEndElement() ' Group
  writer.WriteEndElement() ' TablixMember
  writer.WriteEndElement() ' TablixMembers
  writer.WriteEndElement() ' TablixRowHierarchy
  writer.WriteStartElement("TablixColumnHierarchy")
  writer.WriteStartElement("TablixMembers")
  'writer.WriteStartElement("TablixMember")ForEach fieldName In m_fields
      writer.WriteStartElement("TablixMember")
      writer.WriteEndElement() ' TablixMemberNext' writer.WriteEndElement() ' TablixMember
  writer.WriteEndElement() ' TablixMembers
  writer.WriteEndElement() ' TablixColumnHierarchy
  writer.WriteElementString("DataSetName", "tbdataset")
  writer.WriteEndElement() ' Tablix
  writer.WriteEndElement() ' ReportItems
  writer.WriteEndElement() ' Body
  writer.WriteStartElement("Page")
  ' Page Header Element
  writer.WriteStartElement("PageHeader")
  writer.WriteElementString("Height", "1.40cm")
  writer.WriteStartElement("ReportItems")
  writer.WriteStartElement("Textbox")
  writer.WriteAttributeString("Name", Nothing, "Textbox1")
  writer.WriteStartElement("Paragraphs")
  writer.WriteStartElement("Paragraph")
  writer.WriteStartElement("TextRuns")
  writer.WriteStartElement("TextRun")
  writer.WriteElementString("Value", Nothing, "ABC CHS.")
  writer.WriteEndElement() ' TextRun
  writer.WriteEndElement() ' TextRuns
  writer.WriteEndElement() ' Paragraph
  writer.WriteEndElement() ' Paragraphs
  writer.WriteEndElement() ' TextBox
  writer.WriteEndElement() ' ReportItems
  writer.WriteEndElement() ' PageHeader
  writer.WriteEndElement() ' Page
  writer.WriteEndElement() ' ReportSection
  writer.WriteEndElement() ' ReportSections' DataSources
  writer.WriteStartElement("DataSources")
  writer.WriteStartElement("DataSource")
  writer.WriteAttributeString("Name", Nothing, "tbdata")
  writer.WriteStartElement("DataSourceReference")
  writer.WriteEndElement() ' DataSourceReference
  writer.WriteEndElement() ' DataSource
  writer.WriteEndElement() ' DataSources'DataSet
  writer.WriteStartElement("DataSets")
  writer.WriteStartElement("DataSet")
  writer.WriteAttributeString("Name", Nothing, "tbdataset")
  writer.WriteStartElement("Query")
  writer.WriteElementString("DataSourceName", Nothing, "tbdata")
  'writer.WriteElementString("CommandText", Nothing, "/* Local Query */")
  writer.WriteElementString("CommandText", Nothing, "TableDirect")
  writer.WriteEndElement() ' Query'Fields
  writer.WriteStartElement("Fields")
  ForEach fieldName In m_fields
      writer.WriteStartElement("Field")
      writer.WriteAttributeString("Name", Nothing, fieldName)
      writer.WriteElementString("DataField", fieldName)
      writer.WriteElementString("rd:TypeName", fieldName.GetType.ToString)
      writer.WriteEndElement() ' FieldNext
  writer.WriteEndElement() ' Fields' rd datasetinfo
  writer.WriteEndElement() ' DataSet
  writer.WriteEndElement() ' DataSets
  writer.WriteEndElement() ' Report' Flush the writer and close the stream
  writer.Flush()
  stream.Close()
  'Convert to StreamDim myByteArray AsByte() = System.Text.Encoding.UTF8.GetBytes("D:\MyTestReport2.rdlc")
  Dim ms AsNewMemoryStream(myByteArray)
  'Supply Stream to ReportViewer
  ReportViewer1.LocalReport.LoadReportDefinition(ms)
  ReportViewer1.LocalReport.Refresh()When I open rdlc in designer I get following error"Data at the root level is invalid."When I run the aspx I get following error
An error occurred during local report processing.
The definition of the report '' is invalid.
The definition of this report is not valid or supported by this version of Reporting Services.
The report definition may have been created with a later version of Reporting Services, or contain content that is not well-formed or not valid based on Reporting Services schemas.
Details: Data at the root level is invalid. Line 1, position 1.
Can anybody guide me?

Hi Wendy Fu,
Thanks for your feed back. I could see Microsoft.ReportViewer.ProcessingObjectModel.dll to add as reference to my project. Actually I can open generated rdlc in designer, at run time I get error. I could not make out where is the exact mistake out of three
options flashed.
The definition of this report is not valid or supported by this version of Reporting Services.
The report definition may have been created with a later version of Reporting Services
or contain content that is not well-formed or not valid based on Reporting Services schemas
Details: Data at the root level is invalid
My web config has following references
<add assembly="Microsoft.ReportViewer.WebForms, Version=11.0.0.0, Culture=neutral, PublicKeyToken=89845DCD8080CC91"/>
<add assembly="Microsoft.ReportViewer.Common, Version=11.0.0.0, Culture=neutral, PublicKeyToken=89845DCD8080CC91"/>
May be I have to change these versions to 9 or 10.
First I will try adding Microsoft.ReportViewer.ProcessingObjectModel.dll .
Once thanks for your reply.
Races

HT1926 After installing the lates version of iTunes, a bubble pops up and says, "iTunes installation complete, Error occured during installation before iTunes could be configured. Your system has not been modified.." How do I correct this?

After installing the lates version of itunes on my Sony Vio, a bubble pops up which says:
iTunes installation complete, ERROR occured during installation before iTunes could be configured. Your system has not been modified. To complete the installation process, run the installation again.
I did this, but this bubble keeps appearing. What do I need to do?

Hello there, glenkram.
The following article outlines great steps to try for troubleshooting your very issue:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Cannot open the Infoview error " HTTP 500 - Internal server error Internet

Hi All,
I am new to Business Object XI, now i have a situation where i cannot open Infoview from one the four IBM web sphere, but i can open from rest of the there web sphere and all the other links are working properly in the same websphere. its giving the error " HTTP 500 - Internal server error Internet ".

Hi all,
Can anyone help me regards this issue, did anyone has faced the issue previously..........

Explorer 5.0 Scrapbook files to view in a later version IE 5.2 on a G5

I have a number of Web Archive files that I created from using the Scrapbook feature in MS Explorer 5.0 while using an old Mac PPC.
I was looking for a way to successfully transfer and access my MS Explorer(v. 5.0) Web Archive files from this old Mac PPC to my new G5's later version of Explorer (v. 5.2). To "move" the files, I saved my Web Archive files onto a USB Memory Stick to bring over to the G5. When I try to access the files from the Memory stick, I find that the files were somehow converted to "Unix Executable Files". I've downloaded both the WAC and WAX programs that were referenced in an earlier discussion to see if I can open these, but seem to have no success with either of them. I'm suspicious that the first problem lies with the "Unix Executable Files", but I have no clue how to begin correctly.
Can anyone suggest something to help solve this issue?
Thanks!
G5 Mac OS X (10.4.8)

Like eww said, make sure they're suffixed with ".wac" either before or after copying to the new Mac and happy days.
I've done this with dozens of archives from OS9. If they don't open when you double-click them, open them from within IE, using "Open File ...".
WAC, WAX and iCab (by the same author) should have absolutely no trouble with these files, again, make sure they're suffixed ".wac" or you'll get nothing.

Error while copying the planning version : "S001 001 doesn't exist in P44V"

Hi Leads,
I am trying to copy the planning version for S001 (Version - 001), from the Transaction MC8V. But, it is giving error sayin "S001 001 doesn't exist in P44V".
How can I solve this issue.
Please do suggest.
Thanks,
Sandeep

Check this thread
[Re: SOP Confituration- Maintain Copy Profiles version A00 not maintained |SOP Confituration- Maintain Copy Profiles version A00 not maintained;
thanks
G. Lakshmipathi

Error While copying the Planning version : S001 001 doesnt exist in P44V

Hi Leads,
I am trying to copy the planning version for S001 (Version - 001), from the Transaction MC8V. But, it is giving error sayin "S001 001 doesn't exist in P44V".
How can I solve this issue.
Please do suggest.
Thanks,
Sandeep

Check this thread
[Re: SOP Confituration- Maintain Copy Profiles version A00 not maintained |SOP Confituration- Maintain Copy Profiles version A00 not maintained;
thanks
G. Lakshmipathi

Error internet explorer 9 later version exists internet exploxer 7

Similar Messages

Maybe you are looking for