Error interno (1) Mensaje [131-138]

Buen día.
¿Alguno de ustedes sabe si existe un máximo de campos de usuario que se puedan crear en el sistema? Ya que actualmente en una de mis bases de datos tengo creados 257 campos de usuario y al tratar de generar otro me aparece el siguiente mensaje: Error interno (1) Mensaje .
Cualquier comentario es bien recibido.
Saludos,
Gaby.

Hola no se si sirva pero creo que los campos de usuario tiene un tamaño maximo en GB para campos de Linea hasta 2 GB y para titulo de 255kb
Es posible que te sirva esta informacion

Similar Messages

Se ha producido un error interno (-100) [131 - 183]

Buenos Dias
Al tratar de emitir el libro Mayor de SAP SP00 PL49 me aparece este error y no se emite, esto ocurre en algunos meses no en todos.
Se ha producido un error interno (-100) [131 - 183]

Hola Mario
Revisa la Nota 1347951 - Cannot Print Preview General Ledger/Document Journal report
Ahi viene la descripcion del error, esta es la solucion alterna que ofrece SAP, revisa la nota para que puedas leer el detalle
Solution
The reason for this issue is that there is not enough memory to display the report in Print Preview. You can decrease amount of data by narrowing selection criteria.
Workaround:
Go to File -> Print, and choose to print to PDF or to 'Microsoft Office Document Image Writer'.
The action will be executed with no error message.
Deseo que te sea de utilidad
Yen

Error interno al abrir Acrobat Reader 7.0

Amigos, si alguien está ahí y me puede ayudar lo agradecería.
Instalé Acrobat Reader 7.0 y funcionaba perfectamente, hasta que un día, sin saber por qué - algo debí hacer- al intentar abrir un documento pdf me dió un mensaje de "error interno".
Desinstalé Acrobar Reader y lo volví a instalar (V 7.0) sin ningún éxito.
No tengo ni idea de lo que puede estar pasando. Probablemente es algo que ha pasado a alguien y más de una vez, pero yo estoy absolutamente perdido.
¿Alguna sugerencia?
Gracias.
Tomás

Hola, Judith.
Aquí hay una respuesta en inglés para tu pregunta:
cor pro, "Printing page number?" #, 13 Sep 2005 1:11 pm
Si tienes problemas con el inglés, pasa el texto por cualquier programa traductor, o pregunta aquí.
Me olvidaba: no es recomendable agregar en un tema ya existente una pregunta no relacionada con él. Por una parte, tu pregunta puede pasar inadvertida para quienes podrían responderla; y por otro, es un poco como interrumpir una conversación. Cuando tengas una pregunta nueva, abre un tema nuevo con ella. Y da de partida el máximo de información relevante a tu problema, lo que no hiciste aquí.

Contabilizaciones periódicas. Transacción no ponderada (Mensaje 131-91)

Hola,
No sabéis lo que me alegra tener un foro en español... ¡Por fin!
Tengo un cliente con el siguiente problema: Al generar la siguiente contabilización periódica que le salta automáticamente cada mes:
- Cta 541017 (Debe): 157,97
- Cta 662317 (Debe): 9,03
- Cta 472000 (Debe): 26,72
- Cta 572007 (Haber): 193,72
Sale el mensaje: "Transacción no ponderada (Mensaje 131-91)" y no genera el apunte en el Registro en el diario.
Si realizo la contabilización periódica directamente desde Registro en el diario seleccionando el tipo de contabilización, no me sale el error.
¿Sabéis por qué puede estar ocurriendo?
Gracias.

Hola Esther,
No exactamente con las contabilizaciones periodicas, pero me paso algo parecido cuando intentaba migrar asientos con el DTW. El problema era que migraba en una moneda extranjera y no me cuadraba en moneda local, por redondeos al momento de convertirlos en moneda local. El tema se arreglaba cuando incluia los importes en las dos columnas, tanto en mon
Tal vez lo que te esta pasando es algo parecido con las contabilizaciones periodicas, pero el tema es mas complicado por que en la plantilla solo puedes ponerle una moneda.
Mi consejo es que le informes a SAP del asunto y que por el momento ingreses a cada asiento antes de ser contabilizado y que el sistema recalcule los totales.
Espero que te ayude,
Ian

Getting Internal Error (-1101) occured (message 131-183) on SAP B1 Journal Entry.

Hi,
Im inputting data on journal entry module on SAP B1 when the message showed up, my computer is running on windows 8. (is it an OS problem?) Is there anyway that i could get rid of this error.
Thanks and Regards,
Christian

Hi Christian,
Please check below link.
https://helpdesk.coresystems.ch/entries/20781833-Internal-error-131-occurred-131-183-FAQ-10062-
SAP B1 client system we got error Internal Erro... | SCN
Internal error (-1101) occurred [Message 131-183]
Internal error (-1101) occured [Message 131-183]
Hope this help
Regards::::
Atul Chakraborty

Viewing form in Preview Mode Failed. Error: Table not found [131-183]

Hi,
I have created a user form in screen painter in SBODemo. Created UDT, UDF & Registered UDO through my SDK code.
Everything works fine.
But when i run my addon on any other DB, and open my custom form it gives an error : Table Not Found.
I have checked the UDT's , UDF's & my UDO, all are in place and getting created in the DB.
I tried checking the Form again in screen painter everything is in line. But when i try preview in screen painter it gives an error
Viewing form in Preview Mode Failed. Error: Table not found [131-183].
I can't figure out the issue, i have checked my codes & forms many times.
Regards
John

hi john smith,
Check your screen painter, probably some fields are defined without the "@" character in front.
for fields, check the "U_".
nd.Q

ORA-03137: Error interno de protocolo TTC: [1010]

Hello:
I'm getting the following error in 11.2.0.1, linux 64 bits:
"ORA-03137: Error interno de protocolo TTC: [1010] [] [] [] [] [] [] []"
========= Dump for incident 62542 (ORA 3137 [1010]) ========
*** 2011-02-24 17:54:37.195
dbkedDefDump(): Starting incident default dumps (flags=0x2, level=3, mask=0x0)
----- Current SQL Statement for this session (sql_id=grf2pu6y6964p) -----
select a.firstname, a.lastname, a.username, t.*, mt.nombre, mt.id from tickets_restaurant t, planflexible pf, accesscontrol.account a, meses_tickets mt where pf.id = t.planflexible_id and a.username = pf.username and t.meses_tickets_id = mt.id and pf.anio = :1 and baja = :"SYS_B_0" and pf.estado=:"SYS_B_1" and pf.username = :2 order by :"SYS_B_2", :"SYS_B_3", mt.id
SO: 0x33090b3d8, type: 4, owner: 0x34c6a66d0, flag: INIT/-/-/0x00 if: 0x3 c: 0x3
proc=0x34c6a66d0, name=session, file=ksu.h LINE:11467, pg=0
(session) sid: 1048 ser: 22525 trans: (nil), creator: 0x34c6a66d0
flags: (0x41) USR/- flags_idl: (0x0) -/-/-/-/-/-
flags2: (0x40008) -/-
DID: , short-term DID:
txn branch: (nil)
oct: 3, prv: 0, sql: 0x337864800, psql: 0x3477b6da8, user: 105/PLANFLEX
ksuxds FALSE at location: 0
service name: SYS$USERS
client details:
O/S info: user: root, term: unknown, ospid: 1234
machine: puck.lares.dsd program: JDBC Thin Client
application name: JDBC Thin Client, hash value=2546894660I've opened a SR in Metalink and Oracle tel me that I can use a workaround to avoid this error disabling bind peeking by setting:
SQL> alter system set "_optim_peek_user_binds"=false;Did anybody use this workaround? Are there any bad consecuences?
Thank you in advance for your answer

948439 wrote:
hello, i have the same problem and i create a SR, they suggest the same workarounf, did anybody apply this?
SQL> alter system set "_optim_peek_user_binds"=false;
Are there any bad consecuences?what is worse than throwing ORA-03137 error?

Error interno al loguearme a SAP

hola, buenos días,
Tengo un problema en sap, al loguearme me indica que se ha producido un error interno, he leido todas las entradas respecto al tema, pero no logro encontrar solución a este problema....pensé que era un problema de red, que no había conexion a internet, pero el correo funciona normal, tengo internet, tengo bien la conexión con el servidor, solo es en dos pcs que tengo el problema. Aunque a veces si conectan, otras veces me indica ese error. incluso he pensado que puede ser el cable de red, pero pasa lo mismo. Por favor, alguien sabe que puede estar pasando???
saludos,
SRP

Hola
Leydi
Yo solucione el problema siguiendo los sgtes pasos
1.- Validar que SAP este en las exclusiones del antivirus y sin firewall
2.-. Ir a la sgte ruta C:Documents and Settings/ user / Configuración / LocalApp/ Data/ SAP/SAP Business One.
3. Generar back up de esa carpeta y luego eliminarla.
4.- Eliminar temporales del PC comando %temp%.
5. Abrir SAP y configurar los datos de conexión si es que los pide.
6. Reiniciar el PC y abrir SB1.
Sldos
Oscar V

Errore interno: richiesta non valida, codice 400. (115000) oppure codice 403. (115008)

Cosa devo fare? Sto impazzendo, ogni volta che provo a pubblicare il sito con Muse su ADOBE CATALYST mi da sempre 1 di questi 2 errori ERRORE INTERNO : Richiesta non valida, codice 400 (115000) oppure questo codice 403 (115008)
AIUTATEMI PER FAVORE!!!
Giorgia

This entry already exists in the tables (OCRD - 2038) (131-138)

I get this error without any add-on running directly in SAP trying to add a new Business Partner.
We did reindex all the SQL table for a BP with no success.
However we did upgrader this BD in a more recent environment and the problen went away.
Is there any tools to rebuild the integrity of SAP database tables. Something that could repair a corrupted table in SAP ?
Whatever we add in BP it says the error. Anything that doesn't really exist.
it's weird.....

What is your current B1 version? What new version has you tested?
These two threads somehow linked to CRD object:
Error message when vendor select in Purchase Order
Re: DI : Transform Lead to Customer

Program error occurred at line 131 in .\error.cpp

Good day
What does this mean other than I cant synchronize my calendar with my phone.
Many thanks.

OK thanks. Then if there are no more entries that are causal, I suggest this thread:
http://supportforums.blackberry.com/t5/Desktop-Software-for-PC/Cleanly-quot-Starting-Over-quot-with-...
It starts with a process for cleanly starting over, and there is some discussion, and there is also a post (15) with links to older Desktop Software versions, if those are needed. Note that this is not, by any means, guaranteed to work...but it has worked for many to resolve issues they are having.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Error 131-183

Hello All ,
I am facing authorizations problem when I click on any documnet As I getting an error (-10) occurred message 131-183 , as I am useing SAP 8.8 SP00 PL 18 database : SQL 2008 and Operating system Windows Server 2003 .
pl suggest me .
regards
nitin

Dear kambadasan ,
I think this is not connection problem because this error occurred in only particular user ,If I login another ID it work properly ,
few days before I create new user and copy authorization rights to this user when I open any document that time message display in Permission override "u are not permitted to perform this action " . when I click OK button then system message display
"Internal error (-10) occurred [131 -183] form Unique ID :" after click OK bottom of screen display red message "Item - Invalid Item
[66000-3] from unique ID : 'F_24' Item unique ID :'32'
I also tried to set all full authorization that particular user but till probe accord .
Pl tell me procedure of copy authorization rights to another user .
regards
nitin

Error message when vendor select in Purchase Order

Dear Frnds,
I uploaded Supplier master data in the sap b 1 system, when i select vendor from purchase order it sh
owing error message "no maching record found (CRD1) (ODBC-2028) (message 131-138)"
thanks
srikanth

From this link https://websmp202.sap-ag.de/notes you will reach the Notes Search Page where you will enter the Number in the click >>
Try this first, incase you don't get there I have pasted the note below for you immediate reference.
Summary
Symptom
Import or create Business Partner addresses via DTW or DI API
Other terms
Business Partners, Addresses, Bill To, Ship To, default
Reason and Prerequisites
Need for information
Solution
The correct way to use the BP header and addresses file in DTW is
as follows:
The BP header file in DTW should not be used for importing addresses.
The Default Ship to and Default Bill to columns in the header file are
only used for setting which address is default and not for importing
new addresses.
In these columns you use the address name given in the BPAddresses
import file.
Always use the Addresses file for importing BP addresses.
EG: Create a BP called TestBP and give it 3 addresses in the addresses
file 1 bill to (Bill1) and 2 ship to (Ship1 and Ship2),
then using the header to set Ship2 as default.
See my import files attached to this note.
Creating Addresses via DI API:
The BillToDefault and oBusinessPartner.ShipToDefault properties of the
Business Partners Object: Again these are only to be used to set the Default. To create BP addresses use the BPaddresses Object.
eg: oBP.Addresses.AddressName = "TestBP"

CL_SMTP_RESPONSE error in CRM mail delivery

Hi,
We have problems with mail delivery in our CRM .
The error is:
Error interno: CL_SMTP_RESPONSE Código de error ESMTP desconocido 554
554 SPAM-Relay detected
Nº mensaje: XS829
Please, what to do?
Manuel

Hi,
Error "554 SPAM-Relay detected" comes from your mailserver, hence please check your mail server configuration.
"Error interno: CL_SMTP_RESPONSE Código de error ESMTP desconocido 554"
This comes because 554 is not expected as a status for this problem, so the SAP processing gives "Código de error desconocido", that is "code unknown".
Br,
Javier

Error HTTP 500 - fulfillment

Estado HTTP 500 -
type Informe de Excepción
mensaje
descripción El servidor encontró un error interno () que hizo que no pudiera rellenar este requerimiento.
excepción
javax.servlet.ServletException: La ejecución del Servlet lanzó una excepción
causa raíz
java.lang.Error: 'operator.p12' resource missing
     com.adobe.adept.fulfillment.security.ServerConfig.init(ServerConfig.java:113)
     com.adobe.adept.fulfillment.security.ServerConfig.getSigningURL(ServerConfig.java:48)
     com.adobe.adept.fulfillment.servlet.FulfillmentServerStatus.getServers(FulfillmentServerStatus.java:34)
     com.adobe.adept.common.servlet.Status.checkUp(Status.java:355)
     com.adobe.adept.common.servlet.Status.doGet(Status.java:421)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:617)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
nota La traza completa de la causa de este error se encuentra en los archivos de diario de Apache Tomcat/6.0.24.
I am having this problem with operator.p12 file
Can someone help me?

Have you mentioned the correct path of operator.p12 file and its access details in fulfillment-conf.txt file?
com.adobe.adept.fulfillment.security.pkcs12.file=file:///C:/config/operator.p12
com.adobe.adept.fulfillment.security.keystore.user=????????????
com.adobe.adept.fulfillment.security.keystore.password=?????????????

Error interno (1) Mensaje [131-138]

Similar Messages

Maybe you are looking for