Error: Invalid Configuration Terminating the Palm Desktop

I run Windows Vista and I have a Zire 22.  Norton was running this afternoon and telling me that I was running out of on line back up storage so I cleaned out some files and I thought I had just deleted some junk but now, when I try to launch Palm, I get "Error: Invalid Configuration Teminating Palm Desktop".
How do I fix this please ?  Thanks.
Post relates to: Palm Z22

You have to reinstall the palm desktop. Here is the link http://kb.palm.com/wps/portal/kb/na/zire/z22/unlocked/solutions/article/32859_en.html where you can download the 6.2 version.

Similar Messages

  • Palm OS - Error : Invalid Configuration. Terminating the Palm Desktop

    Hello,
    I am getting this error when i run the Palm OS Desktop, Error: Invalid Configuration. Terminating the Palm Desktop. This is what we did before we start receiving the issue.
    Change the computer for the user from domain1 to domain2. I have also copied all the Desktop and My document folders.
    Please let me know how to resolve this issue. The user has already lost her stuff from the device and she says she has all the updated stuff on her computer and now she is not able to use it.
    Thanks
    JH
    Post relates to: Tungsten E

    You have to reinstall the palm desktop. Here is the link http://kb.palm.com/wps/portal/kb/na/zire/z22/unlocked/solutions/article/32859_en.html where you can download the 6.2 version.

  • Getting Error: Invalid configuration. Terminating the Palm Desktop when starting Palm Desktop 6.2 by Access

    I have recently gotten the error noted in the subject line on my Tungsten E2 whenever I double-click the Palm Desktop icon.  Once I click the OK button I am returned to the desktop without entering the program.  I have installed the program and reinstalled the download from the Palm website several times (as recommended in a number of older posts) with the same results.  I have also checked to see that the User Account Control is turned on (which it is), as recommended in other older posts.
    My workaround was simply to run the program as an administrator and I was able to successfully enter it.  In addition I had to manually create the user folder in the Palm Desktop folder.  Everything now works OK as long as I run the program as an administrator.
    Has anyone found a solution that does not require running Palm Desktop as an administrator?
    Post relates to: Tungsten E2

    Delphi53
    My experience with Palm leads me to believe that if you are running  Windows XP Pro (32 bit version), you should be able to use the older version 4.1.4 Palm Desktop.  See the link:  http://kb.palm.com/wps/portal/kb/na/tungsten/e2/unlocked/solutions/article/37014_en.html
    Try the above.
    I used the above Palm Desktop on an older desktop PC I had that ran Windows XP Home.  The only reason I switched is that I began using a laptop that ran Vista which required Palm Desktop 6.
    If however you are running a Windows XP Pro (64 bit version), you may need the Palm Desktop 6.2 that you already have (on this I am not sure).
    Please note that the material I have mentioned is based upon my Tungsten E2 device.  If you have a different device take a look at the range of Palm Desktops available by device.  See the following link:  http://kb.palm.com/wps/portal/kb/na/tungsten/e2/unlocked/solutions/article/33529_en.html
    As far as User Account Control (UAC) is concerned it is more formalized with Vista, however a form is available under XP. 
    See the following link:  http://blogs.techrepublic.com.com/window-on-windows/?p=509  Note you will have to setup a separate administrator level user on your PC.
    I hope this was helpful.

  • Error: Invalid configuration for the JMS adapter

    Hi!
    I'm doing a test with CEP to get messages from a JMS WebLogic queue but I'm getting the following error:
    <BEA-2045010> <The application context "Teste" could not be initialized: org.springframework.beans.FatalBeanException: Error in initialization context lifecycle; nested exception is java.lang.IllegalArgumentException: Invalid configuration for the JMS adapter, you must Bean or specify a converter or a type of event.
    Teste.context.xml:
    <?xml version="1.0" encoding="UTF-8"?>
    <beans xmlns="http://www.springframework.org/schema/beans"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xmlns:osgi="http://www.springframework.org/schema/osgi"
    xmlns:wlevs="http://www.bea.com/ns/wlevs/spring"
    xmlns:jdbc="http://www.oracle.com/ns/ocep/jdbc"
    xmlns:spatial="http://www.oracle.com/ns/ocep/spatial"
    xsi:schemaLocation="
    http://www.springframework.org/schema/beans
    http://www.springframework.org/schema/beans/spring-beans.xsd
    http://www.springframework.org/schema/osgi
    http://www.springframework.org/schema/osgi/spring-osgi.xsd
    http://www.bea.com/ns/wlevs/spring
    http://www.bea.com/ns/wlevs/spring/spring-wlevs-v11_1_1_3.xsd
    http://www.oracle.com/ns/ocep/jdbc
    http://www.oracle.com/ns/ocep/jdbc/ocep-jdbc.xsd
    http://www.oracle.com/ns/ocep/spatial
    http://www.oracle.com/ns/ocep/spatial/ocep-spatial.xsd">
         <wlevs:event-type-repository>
              <wlevs:event-type type-name="Pet">
                   <wlevs:class>testewithprotobuf.MyPet$Pet</wlevs:class>
              </wlevs:event-type>
         </wlevs:event-type-repository>
         <wlevs:adapter id="pet_messageAdapter" provider="jms-inbound">
              <wlevs:listener ref="pet_inputChannel" />
              <wlevs:instance-property name="converterBean"
                   ref="PetMessageConverter" />
         </wlevs:adapter>
         <wlevs:channel id="pet_inputChannel" event-type="Pet">
              <wlevs:listener ref="pet_messageProcessor" />
         </wlevs:channel>
         <bean id="PetMessageConverter" class="testewithprotobuf.PetMessageConverter" />
         <bean id="PetBean" class="testewithprotobuf.PetBean" />
         <wlevs:processor id="pet_messageProcessor">
              <wlevs:listener ref="pet_outputChannel" />          
         </wlevs:processor>
         <wlevs:channel id="pet_outputChannel" event-type="Pet">
              <wlevs:listener ref="PetBean" />
         </wlevs:channel>
    </beans>
    My converter class:
    import java.util.Collections;
    import java.util.List;
    import javax.jms.BytesMessage;
    import javax.jms.JMSException;
    import javax.jms.Message;
    import testewithprotobuf.MyPet.Pet;
    import com.bea.wlevs.adapters.jms.api.InboundMessageConverter;
    import com.bea.wlevs.adapters.jms.api.MessageConverterException;
    import com.google.protobuf.InvalidProtocolBufferException;
    public class PetMessageConverter implements InboundMessageConverter {
         @SuppressWarnings("rawtypes")
         @Override
         public List convert(Message message) throws MessageConverterException,
                                                                JMSException {
              BytesMessage bytesMessage = (BytesMessage) message;
              long bodyLen = bytesMessage.getBodyLength();
              byte[] buffer = new byte[(int) bodyLen];
              bytesMessage.readBytes(buffer);
              try {
                   Pet pet = Pet.parseFrom(buffer);               
                   return Collections.singletonList(pet);
              } catch (InvalidProtocolBufferException e) {
                   throw new MessageConverterException(e);
    Please, what's wrong?
    Thanks!

    This error usually indicates that you have both event type and converter bean specified or neither specified. In your case, that doesn't appear to the case from looking at the spring file. Could you also paste the contents of your configuration file from META-INF/wlevs directory?

  • Invalid configuration/terminated palm desktop

    when i click on the icon to my palm desktop, i get this message
    "invalid configuration. terminating palm desktop"
    how do i get it working again?
    Post relates to: Palm Vx

    try to see if what are the options under compatibility mode.
    if it is unchecked right, it's grayed out so just check the box for compatibility mode.
    once it's enable try to check what are options.
    Post relates to: Treo 680 (Unlocked GSM)

  • Hotsync occasionally results in an empty calendar in the Palm desktop software.

    Hotsync occasionally results in an empty calendar in the Palm desktop software.
    Updated to most current version - 6.2. That did not help.
    Downgraded to 4.2.1 based on some discussions I read here, but that didn't help either.
    Hotsync logs show successful sync when the problem occurs.
    Re-syncing repopulates the calendar and gives an error about dates older than 1971.
    Anyone have any suggestions?
    Thank you!
    Post relates to: Palm TX

    I hate to bump but any help would be **greatly** appreciated!!
    I'm at my wits end with this problem...

  • Error could not retrieve the virtual desktop template details

    Dear Sir&Madam 
    I have windows server 2012 R2 DataCenter and I installed Hyper-v , after that i create Template , then I make Preper Shutdown (in C:\windows\System32\SysPrep\SysPrep.exe) Run As Administrator, then choose Generalized , Then Shutdown ,when I make a collection
    I got this error (error could not retrieve the virtual desktop template ) please is there any solution for this issue it is very Urgent !!!!!!!!!!!!
    Best regards 
    Rawa Zangana

    Hi,
    Thank you for posting in Windows Server Forum.
    From the error description it suspects that there is some configuration issue. Also agree with Jeremy, please check whether it has 1024 MB of memory. Then suggest you to recheck the steps with below link and then verify the result.
    You can run the following command line:
    Windows 7: %windir%\system32\sysprep\sysprep.exe /generalize /oobe /shutdown
    Windows 8: %windir%\system32\sysprep\sysprep.exe /generalize /oobe /shutdown /mode:vm
    Deploying VDI for RDS 2012 / 2012R2 – Part II – Publishing a Windows 7 Pooled Desktop
    Hope it helps!
    Thanks.
    Dharmesh Solanki
    TechNet Community Support

  • Exporting my addresses from the Palm Desktop software to my iPod

    I've been using the Palm Desktop software (version 4.2.1 for my Palm Pilot). I want to import the address book onto my iPod video. I can convert the addresses from the Palm software to a vCard file, but can't seem to get it to import to the iPod.
    Can anyone help me with this? How do I get it to the iPod?

    On your Palm Pixi browse to the Palm Application Catalog.  Type in "USB" to find the app CL USB Sync.  Install this.
    On your PC browse to http://www.companionlink.com/usbsync.  This will have a PC Program called CompanionLink for webOS USB. Download and install this on your PC.
    These two programs work together to provide full support for Palm Desktop to Palm Pixi via the MicroUSB cable that comes with Pixi.  This provides two-way backup for Contacts, Calendar, Tasks and Memos.  That means in 2-3 months, if you've added a lot of contacts and you drop your Pixi, you'll have full security knowing your contact and calendar data is backed up on your PC.   On Pixi, the Tasks and Memos have special screens within CL USB Sync app, which are similar to what Palm Desktop shows. CL USB Sync does not need Wifi and works great on Pixi.  It also supports Outlook (all versions), Lotus Notes, and Groupwise on the PC.
    You can use all of this for free for 14 days.  It's fine to use it for one-time data transfer.  Unlike the Palm Data Transfer Assistant, CompanionLink supports all versions of Palm Desktop, including Palm Desktop 2.0, 3.0, 4.1, 4.1.2 and 4.1.4, as well as all releases of Palm Desktop 6.2.  Telephone and email technical support is provided free of charge.  If you choose to use the product past 14 days it is $39.95.  Technical support remains free for the lifetime of the product.
    Wayland Bruns, CTO
    CompanioLink Software Inc.
    http://www.companionlink.com

  • Any new info about being able to sync my iphone 4 with the Palm Desktop on macs running snow leopard?

    Any new info about being able to sync my iphone 4 with the Palm Desktop on macs running snow leopard? Why doesn't someone take a a few hours and write a workaround so I can sync all my info including my Palm notes to my iphone via Palm Desktop without putting it in the clouds or making it complicated?  : (

    I feel your pain.  I am a long time user of Palm Desktop/Claris Organizer and have an iPhone that I really can't sync except by doing an export and import into iCal, etc.  You might try Missing Sync.  I have been working intermittently with writing a replacement for Palm Desktop, but I've only gotten as far as dumping out the information for everything (except repeating appointments) as an XML file.

  • Error: SQR configuration and the BRB datasource definition..

    <p>Hello,</p><p> </p><p>I've had Hyperion installed on my computer for about 6 months. Ihave two existing connections to seperate servers with DB2databases. I use existing ODBC drivers for the connection. I wastrying to install a third connection to a server/database and madesome changes to perhaps the driver. When I try to run a report nowI seem to connect and get an error : Failed to produce HTML outputfile. Most likely causes include: SQR configuration and the BRBdatasource definition used for this report. I get this error forall the connections now. I've tried unistalling and reinstallingthe software. I've checked the SQRDIR and BRIO_HOME and they seemedgood. I have the server installed on my computer.</p><p> </p><p>Are there  any suggestions as to what I might have done tocreate this error?</p><p> </p><p>Thank you,</p><p> </p><p>Sheila</p>

    What is the content of the file %PS_HOME%/sqr/opsys.sqc ? What version of Windows ?
    How many processes are running simultaneously ?
    Did you try to run it manually ?
    Nicolas.

  • Where are the Palm Desktop executable​/settings stored?

    Palm Desktop 4.1.4E on Treo 650  Had to re-load from website, and now it wants me to start over.  If possible, I would like to populate the desktop with my previous settings. Thank you
    Post relates to: Treo 650 (Cingular)

    I lost the majority of my data (fortunately I had a relatively new backup) and most of my programs, including Palm Desktop.  So. I downloaded the executable, but when I tried to run the program, it demands that I set it up again - user name, etc. I was wondering if the settings I had before the loss were still located somewhere
    Post relates to: Treo 650 (Cingular)

  • How to sync my Zire 31 with the palm Desktop Software on a Windows 7 PC

    Hi everybody
    My notebook died (vista) so I had to buy a Windows 7 hp model.
    Now I could install the software but the PC doesn't recognize my handheld device.
    A sync is not possible.
    Can anybody tell me how I can make my device known to the system or do I have to leave the Palm world altogether an buy me an ipod?
    I would really like to keep syncing with my palm.
    Thanks in advance.
    Mirri
    Post relates to: Zire 31

    Hi, and welcome to the Palm Support Community.
    Please refer to the stickied thread near the top of this board about syncing with Vista and Windows 7.
    smkranz
    I am a volunteer, and not an HP employee.
    Palm OS ∙ webOS ∙ Android

  • Error while configuring GCM: The push settings were not saved. Error 400

    Hi,
    While configuring push settings for google cloud messaging in azure mobile services, i entered the server key received from google developer console.
    When i try to save the entry, i get the message The push settings were not saved <mobile-serversices-site>: Error 400
    I have regenerated the key multiple times but of no use.
    Am I missing something? I am a paid subscriber of Azure
    Thanks, Laks.

    Sorry for the late reply. Sometimes there are transient errors in the portal that affect whether or not the settings can be saved. Also, you should make sure that you have an associated notification hub (which will show up in your push settings). If there
    is no associated hub, you will always get errors when trying to configure.

  • Error message KB19454 in the BlackBerry Desktop Manager Knowledge Base.

    Please somebody help me!! I have been trying for the past 3 hours to sync my address book with my mac. All I want to do is save my contact information so I can then sync them with my new apple iPhone 4 as I am getting rid of this annoying blackberry curve!!
    My calendar sync worked without problem but I am going crazy with this error message.
    Please someone help me!!!

    Hi and Welcome to the Forums!
    For your first issue, I cannot tell if you've yet worked through the referenced KB...if not, you can find it here.
    For your second issue, I'm unsure...but perhaps this will help:
    Anytime random strange behavior or sluggishness creeps in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
    Best!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Invalid Configuration Location error on startup

    I have just installed Flash Builder 4.5 on my Windows 7 Enterprise edition. I installed this using my username (not Administrator), which has local administrative rights. When I start the program, I'm getting the error
    Invalid Configuration Location
    The configuration area at 'C:\Users\Administrator\Adobe Flash Builder 4.5\cascaded\308971\configuration' could not be created.  Please choose a writable location using the '-configuration' command line option.
    OK  
    Any reason for this error and what's the workaround?

    Hey there!
    Found a woraround to your problem...
    Go to your Flash Bulder install directory and then navigate to the eclipse folder (something like <FB_install_dir>\eclipse\...)
    There you will find a config file with the following lines (at the end of the file):
    [email protected]/Documents/Adobe Flash Builder 4.5/cascaded/<build_number>/configuration
    osgi.shared.configuration.area=file\:configuration
    osgi.configuration.cascaded=true
    What you do is simply remove them. Afterwords when you start the Flash Builder again you will be prompted to enter a new directory to your workspace and everything will run smothly after that.
    Cheers!

Maybe you are looking for