ERROR: invalid http connection : ADS
I am a beginner in ADOBE forms . After creating the context and the data view when i tried to activate it its showing
"invalid http connection : ADS". Please help ....................................
Hi,
Please go through this.
[ADS Configuration|http://help.sap.com/saphelp_nw70/helpdata/EN/b5/3df4614c60469b93f277b55b7809cc/frameset.htm]
Regards,
Madhu.
Similar Messages
-
Adobe Interactive forms error in WD -- Invalid HTTP Connection : ADS
Hi,
am getting the following error when am trying to create interactive forms in WDA..."Invalid HTTP Connection : ADS"
Thanks in advanceHi Chinna,
Please refer to the reply of Manoj Kumar in this [thread|Re: how to check adobe services in webdynpro].
I hope it helps.
Regards
Arjun -
Adobe interactive forms, Invalid HTTP connection: ADS
Hello,
I've installed the Netweaver ABAP trial minisap on my pc and wanted to use adobe interactive forms.
When I active my form, I get this error message "Invalid HTTP connection: ADS".
Any ideas on how to solve this ?
It seems that the ADS is not configured, but I don't know how to do this.
Thanks for your help.
Regards, MichelHi Chinna,
Please refer to the reply of Manoj Kumar in this [thread|Re: how to check adobe services in webdynpro].
I hope it helps.
Regards
Arjun -
Invalid HTTP connection: ADS
Hello,
I've installed the Netweaver ABAP trial minisap on my pc and wanted to use adobe interactive forms.
When I active my form, I get this error message "Invalid HTTP connection: ADS".
Any ideas on how to solve this ?
It seems that the ADS is not configured, but I don't know how to do this.
Thanks for your help.
Regards, MichelSee this guide for setting up ADS:
[http://help.sap.com/saphelp_nw70/helpdata/EN/b5/3df4614c60469b93f277b55b7809cc/frameset.htm]
But I doubt it will work, because you need a dual-stack server (with Java).
/Leif -
How to solve Error in http connection. Error -1
urlMidlet2===http://localhost:8080/testProj?userId=20&selMPBL=23&svMPBL=IPOD+Touch+Screen+e!1!Tue+Jan+06+00:00:00+UTC+2009!Tue+Jan+06+00:00:00+UTC+2009!Sat+Jan+31+00:00:00+UTC+2009!Mp3+Player!IPOD!Rejected!12
[j2mepolish] Generic/DefaultColorPhone: !1!2!1222!13333
[j2mepolish] Generic/DefaultColorPhone: Protocol for this connection is http
[j2mepolish] Generic/DefaultColorPhone: This object is connected to localhost host
[j2mepolish] Generic/DefaultColorPhone: HTTP Port in use is 8080
[j2mepolish] Generic/DefaultColorPhone: respCode=====-1
[j2mepolish] Generic/DefaultColorPhone: Error in opening HTTP Connection. Error#-1
Why is this error coming? How to solve it?
Thanks in advance.
Edited by: J2me_Beginner on Jun 7, 2009 9:38 PMI am making a form using an interface. When Activate the Form, I got this error:
Invalid HTTP connection: ADS
Message no. FPRUN000
But I do not know how to solve or config ADS. Any one know how to slove this error ?
Thanks a lot. -
Hi,
I am getting 'Invalid HTTP Connection :ADS' information message while activating the PDF form and form shows Inactive state only.
I am using ABAP for print from. I have created the Interface and form thru Transaction SFP
Any idea how to solve the issue.
Sa_RHi Sa_R,
Check siomilar threads for ADS configuration in this forum..
This should solve your problem.
Rgds,
- anto. -
SM59 Error in HTTP connections to ABAP Sytems
Hi All,
My scenario is to connect to XI systems... I need to create a RFC destination (HTTP connections to ABAP Systems) in SM 59 with below details.....
Target host: xyz.abc.com
Service No. : 0000
Prefix path : /sap/xi/engine?type=entry
But SAP GUI is not accepting the character "?" ...
Can any one tell what can be done to avoid this error?Hi,
it's only a warning -> just press 'Enter' key.
Regards
Patrick -
File To Proxy Error ICM HTTP CONNECTION FAILED
Dear All ,
Iam Doing File to Proxy Scenario.
XML File is picked by XI Adapter is Properly and if i go and Check in SXMB_MONI,
It is Showing Status is Scheduled for outbound processing and if i see in Que Status is stop with red symbal .If I Click on QueueID it is opening the inbound qRFC Monitoring ,there if click on Queue Name it is showing Status :SYSFAIL,If I Click on SYSFAIL it is Showing the XI Error CLIENT_RECIVE_FAILED.INTERNAL:Que Stop, If I Click on QueueName it is showing while Executing the Functiomodule SXMS_ASYNC_EXE It is having prob i thik showin Error Text :CLIENT_RECIVE_FAILED.INTERNAL:Que Stop,If I Click on Quename it is showing a program RSXMB_SELECT_MESSSAGES is Similar to our SXMB_MONI ,here it is showing the Status Falg Red ,If I Click on that message it is opening the pipeline steps , here while calling Adapter Showing red symbal giving the Error Message ICM_HTTP_CONNECTION_FAILED
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Call Adapter
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">CLIENT_RECEIVE_FAILED</SAP:Code>
<SAP:P1>400</SAP:P1>
<SAP:P2>ICM_HTTP_CONNECTION_FAILED</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:Stack>Error while receiving by HTTP (error code: 400, error text: ICM_HTTP_CONNECTION_FAILED)</SAP:Stack>
<SAP:Retry>A</SAP:Retry>
</SAP:Error>
Please help me its urgent.
Regards
Kumarhi
This is the problem relleated to the HTTP connections, since using the proxy theXML travels to the destination, on your receiveing system make sure HTTP service are active.
in R/3 run this report :SPROX_CHECK_HTTP_COMMUNICATION you will get the error then proceed with the below steps to fix it.
YOur HTTP seriveces on the R/3 have some problem.....
Goto SMICM>goto>servicess you should see the HTTP service running with the ABAP port entry, if this is up then check
SICF--->press f2 you should not have any proxy check there.....
if these are fine then problem is with the Sproxy configuration........ -
Class not found error over HTTPS connection
Problem: Facing problem in downloading signed JAR file over HTTPS connection.
While downloading the jar file over a https connection, i get a certificate with following message
" Do you want to accept the certificate from web site <server name> for the purpose of exchanging encrypted information? "
If i accept the ceritificate immediately without any delay, all goes fine. The jar file gets downloaded and the applet runs withoput any problem. But if we accept the certificate after some delay say after one or two minutes i get "Class not found error"
Has anybody come across any such issue ?
Thanks in advance.
RohitI got the same error. I believe the ssl connection has a short timeout.
But I don't think this is a bug because there is no sense in letting a ssl connection open in the initial state before accepting the server's certificate. -
Errors with HTTPS Connection to external server
I am trying to establish a HTTPS connection to an external web site in transaction SM59, but I get ICM_HTTP_CONNECTION_FAILED errors. I get the same errors from a bespoke ABAP program.
I know the request is getting to the web site, but the response is not getting back into SAP.
This is not firewall related.
I have installed and configured the SAPCRYPTOLIB software for SSL support and entered the necessary instance profile parameters.
I have configured STRUST.
SM59 is setup for type G (HTTP Connection to Ext. Server) and port no. 8443
I have started the HTTPS service in SMICM
I have noticed an odd entry in the SCICM trace file, but dont know how to fix.
<i>ERROR => Connection request from (-1/65535/0) to host: mms-sap.sapmms.com, service: 8000 failed (NIECONN_PENDING)</i>
Does anyone have any suggestions?Thanks for your comments.
I've tried everything in SM59.
SAP refers to both protocols as HTTP.
I think the error is with the response coming back into SAP. SAP doesn't know what to do. It might be DNS related or I might need to configure the ICM somewhere. Oddly the response comes back into sap on port 8000 (which is HTTP). It went out on port 8443 (which is HTTPS). -
Channel login error with HTTPS connection
Hi!
I have developed a Flex application which relies on remote object invocations to BlazeDS. I have applied custom authentication to the AMF channel, so login is required to invoke remote objects over the channel.
Application worked perfectly in development environment but at production environment I cannot get channel sucessfully logged in. I have debugged application and no response is obtained from server after channel.login() invocation. Backend resides on Apache Tomcat that listens on port 80. Server is fronted by a Proxy Server that sets HTTPS protocol (https://domain:80/context is set at browser URL although I request http://domain:80/context).
At development environment requests where made with HTTP protocol so I wonder if this issue is related with the HTTPS protocol present in the new server.
Do I need to configure my channels to use secure (HTTPS) communications? Why am I not getting any error response from channel login operation?
I reviewed server logs and It seems login AMF invocation are been tracked but I cannot get any response.
Thank you in advance.Thank you Alex.
I've set this configuration in services-config.xml. First I tried using SecureAMFEndpoint but then I got an exception on Server that said a secure destination was needed (as it was secured) but was not receiving a secured request. I saw a post in a forum that said AMFEndpoint must be used instead of SecureAMFEndpoint when SSL is applied to a proxy that redirects request to Tomcat, not to Tomcat itself, and this is my case.
<services-config>
<services>
<service-include file-path="proxy-config.xml" />
<default-channels>
<channel ref="amf-channel"/>
</default-channels>
</services>
<channels>
<channel-definition id="amf-channel" class="mx.messaging.channels.SecureAMFChannel">
<endpoint
uri="https://{server.name}:{server.port}/{context.root}/messagebroker/amf"
class="flex.messaging.endpoints.AMFEndpoint" />
<properties>
<add-no-cache-headers>false</add-no-cache-headers>
</properties>
</channel-definition>
</services-config>
After setting this, channel is succesfully logged in and a remote invocation that is executed inmediatly after channel loggin is completed works OK. But when later I call another remote objects, I get request timeout errors and server is not reached.
Any idea of the issue? -
"Invalid CMS Connection" Error during DS 4.2 SP2 Installation
Hi Everybody,
Can anyone shed the light on the following dead end issue we are facing during Data Service 4.2 SP 2 Add On the EXISTING BOBI 4.1 SP2
( compatibility is confirmed by SAP through OSS Incident).
Environment :
Existing Distributed Architecture of BOBI 4.1 SP 2 i..e CMS DB Oracle on One Host and BOBI 4.2 SP2 on Another Host
Adding : Data Services 4.2 SP2 on Separate Host
OS : Linux RED HAT 6.3 (VMware)
At the initial Information Gathering Phase of Data Services Installation I face the following issue at the section of " Enter CMS Name " :
- We entered Physical / Virtual server name with and without FQDN i.e. Current CMS Host
- Next is Admin and Password i.e. Administrator and Password of Existing CMS
We get the following System Response / Error :
Invalid CMS Connection Information.
Installer could not detect a running Data Services Administrator Service with
the specified CMS connection information.
and no valid local SIA node was found.
Installer can not continue.
Please fix this problem by:
1. Making sure a Data Services Administrator Service is up and running with the specified CMS;
2. or creating a valid local SIA node to point to the specified CMS.
It seems this is Known Issue and I see two notes :
1837296 - ERROR: No valid local SIA nodes exist for the given CMS connection information - Data Services 4.x
- Not applicable as this is for IPS based installation
1682686 - Cannot connect to the CMS during installation of Data Services or Information Steward
- This note suggests to enter the TEMP variable pointing to location of Log Files Storing the Installation Logs
accordingly we did set " export TEMP=/usr/sap/<SID>/BOBI " as Temp variable but same error persists with the same message !!
- This note says valid for " DS 4.1 "
..seems SAP Fall behind with the Rapid Frequency of DS Releases and even in this note there's extremely brief so called solution
...Defining TEMP should solve this issue in this case as per the note but, it is not solving issue at all !!
In addition to define TEMP Variable to resolve this, following verification, further attempts are made to fix it :
#1. I am able to ping from Data Services Host to CMS Host and there's no Firewall blocking this connection
#2. Using IP in place of Host Name ( FQDN or without FQDN ) does NOT resolve
#3. With Administrator / Password mentioned - log in is possible
#4. Added entries in /etc/hosts of CMS Host and in DS Host ( cross entries )
#5 There's a Thread -
http://scn.sap.com/thread/3469916 -- and as per that following sap note 1682686 resolves this specific issue but, in our case it does not !
In short : as of now we are at dead end !!
Pl. share your knowledge, inputs - Thanks.
Thanks,
Regards,
- IshanHi Amit,
Thanks for the suggestion - telnet to CMS Host is successful.
I see the following entries in /tmp - file :
=======================================================================
//verify dataservices installation begin
CMS_CONNECTED=true
CMSVersion=14.1.0
BuildNumber=1278
DS_INSTALLED=false
//Local server hostname is : ITSBEBEL00<local_ds_host>.XYZ.COM
//SI_SERVER_NAME for EnterpriseNode is : <cms_host>.XYZ.COM
NODE_LIST=
IS_ADMIN=true
The service DS.AdminService could not be found on the client side (FWM 02027)
com.crystaldecisions.sdk.pojomgr.axis2.internal.Axis2ServiceMgr.findService(Axis2ServiceMgr.java:193)
com.crystaldecisions.sdk.pojomgr.axis2.internal.Axis2ServiceMgr.makePOJO(Axis2ServiceMgr.java:83)
com.crystaldecisions.sdk.pojomgr.internal.POJOMgr.makePOJO(POJOMgr.java:35)
com.crystaldecisions.sdk.framework.internal.EnterpriseSession.getService_aroundBody14(EnterpriseSession.java:347)
com.crystaldecisions.sdk.framework.internal.EnterpriseSession.getService(EnterpriseSession.java:1)
com.crystaldecisions.sdk.framework.internal.EnterpriseSession.getService_aroundBody16(EnterpriseSession.java:364)
com.crystaldecisions.sdk.framework.internal.EnterpriseSession.getService_aroundBody17$advice(EnterpriseSession.java:512)
com.crystaldecisions.sdk.framework.internal.EnterpriseSession.getService(EnterpriseSession.java:1)
com.businessobjects.di.install.CMSConnect.getDSAdminService(CMSConnect.java:244)
com.businessobjects.di.install.CMSConnect.main(CMSConnect.java:321)
DS_AdminService_Installed=false
RETURN_CODE=2
//verify dataservices installation end
====================================================================
It is puzzling that without the completion of Data Services Installation why the DS Installer is expecting ' DS.Admin services " running on 'client' ...this is an extension or add on of Data Services (to be installed on separated linux host) and communication is supposed to be from DS Host to CMS Host !! Where is the scope of client here ??
We do see that connection to CMS Host is possible ..I found few more notes related to this ( not for the identical OS+DB+DS ver. i.e. Linux+Oracle+DS 4.2 SP2) e.g. 1824068, 1632561 but, none of it helps to resolve the issue.
Thanks,
Best Regards,
- Ishan -
HTTP connection to ABAP Runtime failed : 403 : forbidden
Hi all,
I have configured a normal file to file scenario and when i test it in the TEST CONFIGURATION tool in intergration directory, am getting the error.
HTTP connection to ABAP Runtime failed
403: forbidden
user: PIDIRUSER
Sugessions plzzz
Regards
Arun
Message was edited by:
Arunkumar sukumarHi
Try this
note 517484
1) Activated all services
2) In Integration builder, receiver communication channel make sure you have entered proper
host service number
path = /sap/xi/enigne?type = receiver.
3)Go to SU01 > type PIISUSER and reset the user's pw
Check out this might be helpful
http://help.sap.com/saphelp_nw04/helpdata/en/89/05793c05f0807be10000000a11405a/content.htm
1.Did you maintain Client, userid, password, and lang information in SICF transaction -> sap/xi/engine? Double click on service and check whether you have entered correct information.
2.Then you might check the roles of the XIISUSER in SU01. In some case there are some double roles, i.e., two times the role SAP_XI_IS_SERV_USER assigned. One might have the date of the last update, the other one might have apparently the older version. Delete the older roles manually and the error should disappear.
3.to send messages to xi you need a service id / pwd which is specific to your landscape usually its xiappluser. Contact your basis group for password.
4.
- Activated all services on the r3 system.
- Create HTTP connection to XI from r3
sm59-> http connetons to r3
- let us say you have created a HTTP connection in the integrationserver_XI, make sure in its settings the prefix path is set to /sap/xi/engine?type=entry. Also check its log on credentials, you can use xiappluser.
- IN Integration builder, receiver communication channel make sure you have entered proper
host service number
path = /sap/xi/enigne?type = receiver.
5. can you also try the following;
Visual Admin -> start the service,
"com.sap.aii.af.ms.app".
I don't know this Forum no fhats why i copied.
Thanks -
Hi,
I'm using a pjc on my forms but on runtime i received an error: open HTTP connection failed.
The output of my java console is :
Oracle JInitiator: Version 1.3.1.22
Using JRE version 1.3.1.22-internal Java HotSpot(TM) Client VM
User home directory = D:\documents and settings\OFV7600
Proxy Configuration: Automatic Proxy Configuration
JAR cache enabled
Location: D:\documents and settings\OFV7600\Oracle Jar Cache
Maximum size: 50 MB
Compression level: 0
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
l: dump classloader list
m: print memory usage
q: hide console
s: dump system properties
t: dump thread list
x: clear classloader cache
0-5: set trace level to <n>
Loading http://do040001334/forms60java/f60all.jar from JAR cache
Loading http://do040001334/hsd65-java/hst65.jar from JAR cache
Loading http://do040001334/forms60java/classes12.jar.sig from JAR cache
Loading http://do040001334/forms60java/cadtest.jar.sig from JAR cache
Loading http://do040001334/forms60java/browser_jpkg.jar.sig from JAR cache
Loading http://do040001334/forms60java/TutoFichier.jar.sig from JAR cache
Loading http://do040001334/forms60java/stip.jar.sig from JAR cache
Loading http://do040001334/forms60java/pkg_scroll.jar.sig from JAR cache
Loading http://do040001334/forms60java/client.jar.sig from JAR cache
Loading http://do040001334/forms60java/pkg_geosoft.jar.sig from JAR cache
Loading http://do040001334/forms60java/cadtest20060320.jar.sig from JAR cache
connectMode=Socket
serverHost=DO040001334
serverPort=9000
Forms Applet version is : 60824
java.lang.ClassNotFoundException: java.io.IOException: open HTTP connection failed.
at sun.applet.AppletClassLoader.getBytes(Unknown Source)
at sun.applet.AppletClassLoader.access$100(Unknown Source)
at sun.applet.AppletClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.applet.AppletClassLoader.findClass(Unknown Source)
at sun.plugin.security.PluginClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClassInternal(Unknown Source)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Unknown Source)
at oracle.forms.handler.UICommon.instantiate(Unknown Source)
at oracle.forms.handler.UICommon.onCreate(Unknown Source)
at oracle.forms.handler.JavaContainer.onCreate(Unknown Source)
at oracle.forms.engine.Runform.onCreateHandler(Unknown Source)
at oracle.forms.engine.Runform.processMessage(Unknown Source)
at oracle.forms.engine.Runform.processSet(Unknown Source)
at oracle.forms.engine.Runform.onMessageReal(Unknown Source)
at oracle.forms.engine.Runform.onMessage(Unknown Source)
at oracle.forms.engine.Runform.sendInitialMessage(Unknown Source)
at oracle.forms.engine.Runform.startRunform(Unknown Source)
at oracle.forms.engine.Main.createRunform(Unknown Source)
at oracle.forms.engine.Main.start(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Where is my problem ?
How to resolve my problem ?
Thanksthanks,
I had do the classpath
Now, I have another problem
Oracle JInitiator: Version 1.3.1.22
Using JRE version 1.3.1.22-internal Java HotSpot(TM) Client VM
User home directory = D:\documents and settings\OFV7600
Proxy Configuration: Automatic Proxy Configuration
JAR cache enabled
Location: D:\documents and settings\OFV7600\Oracle Jar Cache
Maximum size: 50 MB
Compression level: 0
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
l: dump classloader list
m: print memory usage
q: hide console
s: dump system properties
t: dump thread list
x: clear classloader cache
0-5: set trace level to <n>
Loading http://do040001334/forms60java/f60all.jar from JAR cache
Loading http://do040001334/hsd65-java/hst65.jar from JAR cache
Loading http://do040001334/forms60java/classes12.jar.sig from JAR cache
Loading http://do040001334/forms60java/cadtest.jar.sig from JAR cache
Loading http://do040001334/forms60java/browser_jpkg.jar.sig from JAR cache
Loading http://do040001334/forms60java/TutoFichier.jar.sig from JAR cache
Loading http://do040001334/forms60java/stip.jar.sig from JAR cache
Loading http://do040001334/forms60java/pkg_scroll.jar.sig from JAR cache
Loading http://do040001334/forms60java/client.jar.sig from JAR cache
Loading http://do040001334/forms60java/pkg_geosoft.jar.sig from JAR cache
Loading http://do040001334/forms60java/cadtest20060320.jar.sig from JAR cache
connectMode=Socket
serverHost=DO040001334
serverPort=9000
Forms Applet version is : 60824
_____START CADViewerWrapper() constructor_____
Running CADViewer 8.0.6d
Exception =java.security.AccessControlException: access denied (java.io.FilePermission viewer.cfg read)
java.security.AccessControlException: access denied (java.io.FilePermission viewer.cfg read)
at java.security.AccessControlContext.checkPermission(Unknown Source)
at java.security.AccessController.checkPermission(Unknown Source)
at java.lang.SecurityManager.checkPermission(Unknown Source)
at java.lang.SecurityManager.checkRead(Unknown Source)
at java.io.File.isDirectory(Unknown Source)
at sun.net.www.protocol.file.FileURLConnection.connect(Unknown Source)
at sun.net.www.protocol.file.FileURLConnection.getInputStream(Unknown Source)
at com.cadviewer.be.a(Unknown Source)
at com.cadviewer.be.do(Unknown Source)
at com.cadviewer.e0.m(Unknown Source)
at com.cadviewer.e0.a(Unknown Source)
at com.cadviewer.ViewerAWT.<init>(Unknown Source)
at cadtest20060320.CADViewerWrapper2.<init>(CADViewerWrapper2.java:78)
at java.lang.Class.newInstance0(Native Method)
at java.lang.Class.newInstance(Unknown Source)
at oracle.forms.handler.UICommon.instantiate(Unknown Source)
at oracle.forms.handler.UICommon.onCreate(Unknown Source)
at oracle.forms.handler.JavaContainer.onCreate(Unknown Source)
at oracle.forms.engine.Runform.onCreateHandler(Unknown Source)
at oracle.forms.engine.Runform.processMessage(Unknown Source)
at oracle.forms.engine.Runform.processSet(Unknown Source)
at oracle.forms.engine.Runform.onMessageReal(Unknown Source)
at oracle.forms.engine.Runform.onMessage(Unknown Source)
at oracle.forms.engine.Runform.sendInitialMessage(Unknown Source)
at oracle.forms.engine.Runform.startRunform(Unknown Source)
at oracle.forms.engine.Main.createRunform(Unknown Source)
at oracle.forms.engine.Main.start(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
url=file:/d:/acad_B/es/cat/STIP/Extract/410009.dwf
url=file:/d:/acad_B/es/cat/STIP/Extract/410009.dwf
Netscape security model is no longer supported.
Please migrate to the Java 2 security model instead.
Netscape security model is no longer supported.
Please migrate to the Java 2 security model instead.
protocol=file,fileURL.getHost()=,fileURL.getPort()=-1,fileURL.getFile()=/d:/acad_B/es/cat/STIP/Extract/410009.dwf
FileToArray url=file:/d:/acad_B/es/cat/STIP/Extract/410009.dwf
longName=dummy.dwf
java.lang.NullPointerException
at java.awt.Container.addImpl(Unknown Source)
at java.awt.Container.add(Unknown Source)
at cadtest20060320.CADViewerWrapper2.<init>(CADViewerWrapper2.java:84)
at java.lang.Class.newInstance0(Native Method)
at java.lang.Class.newInstance(Unknown Source)
at oracle.forms.handler.UICommon.instantiate(Unknown Source)
at oracle.forms.handler.UICommon.onCreate(Unknown Source)
at oracle.forms.handler.JavaContainer.onCreate(Unknown Source)
at oracle.forms.engine.Runform.onCreateHandler(Unknown Source)
at oracle.forms.engine.Runform.processMessage(Unknown Source)
at oracle.forms.engine.Runform.processSet(Unknown Source)
at oracle.forms.engine.Runform.onMessageReal(Unknown Source)
at oracle.forms.engine.Runform.onMessage(Unknown Source)
at oracle.forms.engine.Runform.sendInitialMessage(Unknown Source)
at oracle.forms.engine.Runform.startRunform(Unknown Source)
at oracle.forms.engine.Main.createRunform(Unknown Source)
at oracle.forms.engine.Main.start(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
__START CadWrapper public void init
__END CadWrapper public void init
What about -
Error: invalid content type for SOAP: TEXT/HTML; HTTP 400 Bad Request
Hi Gurus,
i am hardly fighting with this error in Communication Channel Monitoring:
Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 400 Bad Request
SOAP: call failed: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 400 Bad Request
This is my scenario.
I do a File to SOAP Scenario. in SXI_MONITOR everything is fine.
My CommChan is a SOAP Receiver
HTTP
SOAP 1.1
Central Adapter Engine
Target URL is https --> i check url for correctness
Configure User Authentication is checked and username and pw are given and are correct.
Configure Certificate Authentication is checked are working
Configure Proxy is checked and Host and port are povided.
SOAP Action is provided
In Tab Module
if have this Processing Sequence
1 localejbs/AF_Modules/MessageTransformBean Local Enterprise Bean transform
2 sap.com/com.sap.aii.af.soapadapter/XISOAPAdapterBean Local Enterprise Bean 1
and this Module configuration (and only this)
transform Transform.ContentType text/xml;charset=utf-8
(according to /people/sobhithalaxmi.kata/blog/2009/07/21/cost-free-edi-integration-using-message-transformation-bean)
As far as i understand that my http header should have Content-Type: text/xml;charset=utf-8 now. I don't understand why Communication Channel Monitoring shows an error according to content TEXT/HTML.
Can anyone help me with that?
Is it possible that Transform.ContentType does not work for SOAP Receiver Adapter?
is there any chance to view the HTTP-Header of the outgoing SOAP Request (with PI Transaction / Java Enironment) to convince myself that the HTTP Header is text/xml?
Thank you in advance and Best Regards
UdoHi Thanks for your fast replies.
The Provider of the Endpoint tells me that he needs text/xml as content-type. When I sent a message to the given Endpoint via SOAP UI I can see in the HTTP LOG of SOAP UI that the Endpoint is also sending text/xml back.
Below you find the Details log out of the CommChan Monitoring.
2011-04-29 11:37:45 Information The message status was set to TBDL.
2011-04-29 11:37:45 Information Retrying to deliver message to the application. Retry: 3
2011-04-29 11:37:45 Information The message was successfully retrieved from the receive queue.
2011-04-29 11:37:45 Information The message status was set to DLNG.
2011-04-29 11:37:45 Information Delivering to channel: getxxxxx_In <---- name of my SOAP Receiver CommChan
2011-04-29 11:37:45 Information Transform: using Transform.Class: $identity
2011-04-29 11:37:45 Information Transform: transforming the payload ...
2011-04-29 11:37:45 Information Transform: successfully transformed
2011-04-29 11:37:45 Information SOAP: request message entering the adapter with user J2EE_GUEST
2011-04-29 11:37:46 Error SOAP: call failed: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 400 Bad Request
2011-04-29 11:37:46 Information SOAP: sending a delivery error ack ...
2011-04-29 11:37:46 Information SOAP: sent a delivery error ack
2011-04-29 11:37:46 Error SOAP: error occured: com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 400 Bad Request
2011-04-29 11:37:46 Error Adapter Framework caught exception: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 400 Bad Request
2011-04-29 11:37:46 Error Delivering the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 400 Bad Request.
2011-04-29 11:37:46 Error The message status was set to NDLV.
What i am missing is a hint on the Message Transform Bean and a on a successfull sending process.
What i also tried already:
i also activated the checkbox "Do not use SOAP Envelop" in CommChan Configuration. The Result you see below (the last log entry is on first line - so read from bottom to top)
Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 400 Bad Request
error in response
call completed
request entering
Message processing started
As you can see there is a "call completed" and "error in response" log entry. This is missing in in the first Log. So i guess the error is still in the sending process.
Installing additional Software on the PI and use them to find out what the HTTP Request is is not possible as system access is very strict and limited :/
Maybe you are looking for
-
Is there a way to transfer music that is in my old ipad?
I just got a iPad air today and i would like to know if there is a way to retrieve the music i downloaded on my old ipad to my new one.....j
-
Logic pro x what you can expect from installation?
Hi There guys. What exactly is the logic pro x downlaod and install procedure? How soon after you download the 650MB of data from the app store can you use Logic X? Right now I am unable to use logic x, its just busy at the "BASIC CONTENT DOWNLOAD" s
-
How to put Menu in WebDynPro for ABAP
How to put Menu in WebDynPro for ABAP
-
I am trying to see which Flex SDK are reported. Some places mention 2.0 as the only supported version, however, a current project really needs it to support 3.x, does this SDK absolutely not work?
-
Hi, My scenarion is File-> XI -> iDoc. After the logical routing is complete I am getting the following message "Leave pipeline processing after LR because of receiver-wise queueing" And the XML message is put in status 12 = "scheduled for output pro