Error Invalid Number, re-send using a 10 digit number when texting a certain number, but when I put the area code in it still sends to the 7 digit number
About a month ago I added a friends number without the area code. I was in an area that I couldn't send texts from. Two days ago he texted me and I tried to reply, but when I did I got the error message "Error Invalid Number. Please re-send using a valid 10 digit mobile number or valid short code."
So, I put in the area code in front of the number and when I sent it, the phone dropped the area code and just sent it to the 7 digit number. I went ahead and deleted all of his contact information and text messages to him and re-entered the with the area code and saved him as a new contact. I tried to text the number and it still sent it to only the 7 digit number!!!
I have tried everything there is to try, but there seems to be a part of the phone that is remembering this number even after I've deleted it and everything associated with it.
Does anybody have a solution for this?? I have called Apple and they told me they have never heard of this problem before.
The fix for this problem is easy and is set out here: http://edctips.blogspot.com/2014/09/fixing-iphone-texting-problem.html
Similar Messages
-
When i tried to text a message from my contact list i received a message saying invalid number of digits. i used the area code with the number but still would not send
Call your carrier and see what they suggest.
-
I have created a farm solution and then i deploy it to SharePoint server, the code looks as follow, and i use it to update a page info values (as the current page values represents old info):-
[ToolboxItemAttribute(false)]
public partial class VisualWebPart1 : WebPart
// Uncomment the following SecurityPermission attribute only when doing Performance Profiling using
// the Instrumentation method, and then remove the SecurityPermission attribute when the code is ready
// for production. Because the SecurityPermission attribute bypasses the security check for callers of
// your constructor, it's not recommended for production purposes.
// [System.Security.Permissions.SecurityPermission(System.Security.Permissions.SecurityAction.Assert, UnmanagedCode = true)]
public VisualWebPart1()
protected override void OnInit(EventArgs e)
base.OnInit(e);
InitializeControl();
using (SPSite site = new SPSite(SPContext.Current.Site.Url))
using (SPWeb web = site.OpenWeb())
SPList list = web.Lists["Pages"];
web.AllowUnsafeUpdates = true;
foreach (SPListItem items in list.Items)
items["Author"] = "SharePoint";
items["Created"] = "01/08/2014 01:44 PM";
items.Update();
list.Update();
web.AllowUnsafeUpdates = false;
protected void Page_Load(object sender, EventArgs e)
but when i try adding this web part to a page i got the following error:-
Invalid data has been used to update the list item.The field you are trying to update may be read only
so can anyone advice?i only changed lines bitween
web.AllowUnsafeUpdates = true;
and
web.AllowUnsafeUpdates = false;
and other parts of code remains without change
so it will updates all pages in current web
yaşamak bir eylemdir -
I receive an error message whenever I try to send text messages to new contacts. It says the number is invalid and to enter a 10 digit number. I have tried entering the phone number with the area code and without the area code. Any ideas?
Same problem here. I've deleted the contact and had them text me, but when I try to text them back I get the same invalid number message! So frustrating! Please help!
-
Received text from friend and whole number is showing. In contact all the number shows but when texting the phone shows an error & requests the area code to be added. I have deleted the contact & the text thread then rebooted the phone but still happening. Help!
I'm sorry you're getting the +1 error message! Apple is working on a bug fix for this issue, fingers crossed it is corrected soon!
There is a work around that has helped many iPhone users experiencing this:
1. Delete the affected contacts from your phone
2. Delete the entire conversation thread
Next:
Go to Settings> General> Reset> Reset Network Settings (this will delete any saved Wi-Fi passwords; no other data)
Once the phone reboots, add the contact back to your device and start a new message thread.
I hope this helps you! -
Using Adobe Photoshop CS2 version 9 and have updated it, but when stacking photos, it comes up with PSD, whereas I want Jpeg, and I change the format to Jpeg and the box then comes up with cannot save as there is a program error. Be very grateful for help with this, please.
jpg does not support Layers.
Just to make sure, what exactly do you mean by "stacking photos" and what do you want to achieve thereby? -
Cisco SPA112:
Can I make dial plan that can use 6 digit numbers without having to dial the area code 00357 but also being able to dial 0030xxxxxxxxxx numbers?If you include a country number, you have to drop the initial 0 from the area code. eg +31 10 2345 6789 instead of +31 (0)10 2345 6789
-
i got a macbook pro 13 inch core i5 late 2011 , it came with osx lion and i been using facebook videocalls normaly , now i updated to Mountain lion
but when i use facebook video calls in (safari ,chrome ) i see the window box but i only see my self i can hear my friends but cant see em, they also can see me and hear me but i just see me and hear them .
any ideas ?Your wifi problem sounds very much like the problem I had. The wifi would drop out, the icon showed it was still connected. If I turned it off, I couldn't turn it back on. Another user here pointed me to the problem, which was the wifi cable (the flat cable goint from the card to the motherboard). I found it on ebay for $13 and it's been running fine since I replaced it. This is the repair guide for your machine. The part number will be on there if you click the link.
http://www.ifixit.com/Guide/MacBook+Pro+15-Inch+Unibody+Late+2011+AirPort-Blueto oth+Cable+Replacement/7510 -
I bought my iPhone 4 open line in Vancouver, Canada last week for use here in my home base in Bangkok, Thailand. But when I tried using my Thai sim, I get a very weak signal, if not a weak signal, then a no service status. I also have very weak wifi reception. What do I do?
I already tried the following:
a. Turned the phone off and then on.
b. Checked all wifi connections – no problem given that all our laptops and desktops can connect seamlessly.
c. I tried restoring the phone to original factory settings via itunes
d. Tried resetting the phone.
e. Tried different microsims from all networks
f. However, all methods failed given that the network reception is very weak and often reflects – “no service”. And with regards to the wifi reception It has difficulty in reading even the signal right in front of the wifi router.
I went to two Apple resellers here in Bangkok and requested that they please look at my Iphone and have it serviced. I was frustrated when they said that given that I bought my phone in Canada, they are not able to support me and should instead try to contact the Apple store in Canada.
I went to apple.ca website and went to the expresslane support and I was said to register and callback. Tried calling the 1800 number but given that I was in Thailand I had difficulty getting a connection.1st sentence, 4th page of the iPhone warranty found here:
Apple may restrict service to the country where Apple or its
Authorized Distributors originally sold the hardware product.
From the Repair terms and conditions found here:
9. Availability of Service.
Apple may restrict service to the country where Apple or its authorized distributors originally sold the
hardware product, and to the countries listed in the table below. A list of authorized distributors is
available online at:
http://images.apple.com/legal/warranty/docs/iPhoneAuthorizedDistributors.pdf
If you do not believe that, then see these search results which confirm my statement. -
my phone saves the same number twice, once with a 1 before the area code and one without it. It causes two different threads in my texts even of they're saved as the same contact
My wife is having the same problems as a reciever. She works in a school as a teaching assistant and her teacher sends messages that are mixed with previous texts from ages ago.
Can anyone shed some light on this problem or is it only her and this poster?
2m42s -
I try to drag certain loops but when i drop them in i get the error:
Result code = -5000
File = GarageBand-Temp-B262E454.tmpHi,
I've been trying to solve this problem for a school my companey has set up. After some research and looking at a number of similar posts I tracked the problem down to loops that came with jam packs or with apps like soundtrack pro. These loops are located in /Library/audio/appleloops. If you give everyone read and write access to this folder and it items the loops seem to work.
I also noticed that once the loops were working agin GB had to convert the sample rate so it's possible that it's the sample rate on certain loops that causess the issue or prehaps the need to change the rate.
Hope this helps.
Matt Fleming
(ACSA) -
I used to share one apple ID/account with my ex but made a new one for myself recently and logged out of the old one but when I try to update my iBooks (only happens with this app)it asks for the other account's password(which my ex changed by now). I don't understand why this happens when I'm logged into my account and it only happens with that app. Please help, I need to update. :/
Content (apps, music, ibooks, films etc) is tied to the account that originally downloaded it, so if the iBooks app was downloaded using the account that you used to share with your ex then only that account can download updates to it. As it's a free app you could delete it and re-download it under your own account - and then re-download your ibooks into it (or copy the books to your computer's iTunes first via File > Transfer Purchases and then sync them back to the app).
-
I have a Mac Book Pro with 10.6.8 and want to back up my files using a flash drive. It says I did it but when I tried to check on my other Mac - an I Mac with 10.5.8, thedata does not seem to be there. I cant see photos, etc.. It shows the backup as a file and shows various system info. but there are no photos or other files shown.
Thanks for any advise.
MikeA PowerPC Mac, if that's what it is, won't be able to see an Intel Mac's formatted data. Also ExFat formatting is not supported by 10.6.3 or earlier. I would try viewing the backup on another Intel Mac with at least 10.6.4. If it isn't there, then the backup never really took place. I much profer a hard drive with Carbon Copy Cloner.
-
I have an apple ID which I use to sign into icloud for my iPad and iPhone.But when I use the same ID for setting up iCloud on my Macbook it says INCORRECT ID or password, try again. I tried changing my passwords several times but it does not work for the macbook.
You will have to provide the correct password to delete the existing account, if you have tried but are not getting the password reset email, contact Apple for assistance by going to https://expresslane.apple.com, then click More Products and Services>Apple ID>Other Apple ID Topics>Lost or forgotten Apple ID password.
-
Sir i have lost my apple iphone and i do not remember IMEI number of the iphone and the sticker affiexed on the box is also not present (lost) but i have the bar code 602-7484-A printed on the box and police is asking for the IMEI number so please help
The IMEI number is stored in iTunes:
iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number
I can't imagine that any police agency in the world would request this information.
Maybe you are looking for
-
I have restarted my ipod touch a countless amount of times, and it is stuck on a screen. on the screen it says, "ipod is disabled, connect to itunes". i have also tried connecting it to itunes, and itunes says i have to type my passcode in for it to
-
Problem with Managing Subscriptions (URL)
The problem consists of which I cannot create the sindicador, entrance the URL of the subscriber and the respective user, but at the time of Get Catalogue sends the following message: Error: Error en la conexión con el sindicador (No ICE server) I ho
-
Additional Tab in CRMD_BUS2000126 using EEWB
Dear Experts, I have successfully created an additional tab in Maintain Activities using EEWB. The fields display. I can write to them and read from them just fine. Now the user wants the new tab to display conditionally. In our case, the display of
-
Cannot connect to MS SQL 2008 R2 locally or remotely.
When I try to connect to my SQL 2008 I get the following error: TITLE: Connect to Server Cannot connect to <machinename>. ADDITIONAL INFORMATION: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The
-
How to repair a corrupt LR catalog?
While I was importing photos from an SD card using a Promaster card reader using an iMac OSX computer, I suddenly got the spinning beach ball. After several minutes, I realized that the computer and LR program were completely frozen, and the only al