Error: Invalid Parameter when trying to extend volume in Windows Server 2012

From VMware, I added space to a Hard Drive to a Windows Server 2012 VM.  I then went into the WinServer console, and opened Disk Management.  I did a rescan on the disk.  It found the extra space.  I right mouse click on the Disk,
and choose Extend Volume, choose the available space, and then an error returned of 'Invalid Parameter'.
In Disk Manager, the new larger space is assigned, but Windows Explorer and everything else only recognizes the original smaller size.  
EventManager shows Event ID 265: A pointer device did not report a valid unit of angular measurement.  Event ID 257: A pointer device reported a bad angular physical range. Event ID 258: A pointer device reported a bad angular logical range.
Anyone have a solution for this problem?

Hi,
Please try to use the command line utility diskpart to extend the drive.
1. Open a command prompt
2. Type in diskpart
3. Type list volume
4. Type select volume #  
5. Type extend [size=n] [disk=n]
For more detailed information about diskpart, please see:
DiskPart Command-Line Options
http://technet.microsoft.com/en-us/library/cc766465(v=ws.10).aspx
You could refer to the article below to troubleshoot the issue:
Windows Server 2008 drive doesn’t expand correctly after extending in VMware VI client
http://consultingblogs.emc.com/greggrobertson/archive/2010/05/27/windows-server-2008-drive-doesn-t-expand-correctly-after-extending-in-vmware-vi-client.aspx
Please Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Best Regards,
Mandy 
If you have any feedback on our support, please click
here .
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

  • Error -51 when trying to copy file to windows server 2012

    When I try to copy a file from OSX to windows server 2012 share, it acts like its going to start and i get a pinwheel and finder is acting slow and finally error -51. although it does seem to copy over the folder with correct name but no files inside. I had this issue on mavericks as well and now on yosemite beta. Please help!
    Jarrod

    If the drive is formatted HFS then you are limited to 32 characters on a file name. If it is formatted HFS + then you can have file names as long as 255 characters. I am not familiar withi the format you say the drive is formatted in so I can't speak to it.
    If you are receiving -50 errors that can indicate a file name that is too long OR an illegal character in the filename regardless of its length.
    If you are actually using 10.3.8 as your profile states then that may be part of the problem. Many of these problems existed in 10.3.X but were fixed in 10.4
    I remember that 10.3.8 had issues copying to external drives when there were more than a certain number of characters in a filename. I don't remember the number but for some reason 10 or 12 is what comes to mind. It caused me many problems when I would try and copy files to a Zip disk that I used to have. Since I updated to 10.4 those issues have never occured again.
    Since you know what folder the problematic files are in why not just open the folder and try to copy files one at a time. When you get to the one(s) that is a problem, change the file name to something shorter.
    A better solution would be to update to 10.4 but with 10.5 coming out sometime in the Spring of 2007 this may not be the time.

  • Error: Invalid Password when trying to sign in on any wireless devise

    Error:  Invalid Password when trying to sign in on any wireless devise
    I even reinstalled my WRT110 to be sure of the Network Name and Password but I still get this error.  I have never been able to log in to the wireless network.  I can see it - Ienter my password and still "Invalid Password"

    I don't understand this: Connect directly to the router.  Is this the http://192.168.1.1?
    I  HAVE changed the network name, I HAVE changed the password.
    I still get invalid password!!!
    I am extremely frustrated by all this.  I need simple instructions.  I followed them when I set the friggin thing up, I reinstalled.  I know what my friggin password is - why why why?

  • An Active Directory error 0x51 occurred when trying to check the suitability of server

    We have several exchange administrators and two exchange 2010 servers and one exchange 2007 server. I am getting the following error message
    when opening up Exchange Management Console on one of the exchange 2010 server. 
    "An Active Directory error 0x51 occurred when trying to check the suitability of server 'dc101.domain.local'. Error: 'Active directory
    response: The LDAP server is unavailable.' 
    dc101 does not exist anymore. I tried changing the Configuration Domain Controller by manually specify a domain controller but get the exact
    same error message and also gets an empty list when selecting the domain. Other administrators who logs into to the same server do not get this error message. 
    If I open the exchange management console on another exchange server, it works without problem. Is there a setting somewhere I need to change
    to point it to the correct domain controller using power shell?

    I fixed it for myself.
    Organization Configuration->Modify Configuration Domain Controller->select Use a default domain controller
     

  • I have an error when join pc's to domain windows server 2012 r2

    Hello everyone
    I have a problem to join computers to the domain.
    I'm doing the procedure is as follows.
    1.'ll properties pc
    2. I click Change to join the domain.
    3. I request the domain administrator credentials
    4. I get the window that has joined the domain correctly and then click accept gives me the following error:}
    This error message me with all computers that attempt to join the domain.
    I have reviewed forums, I have already set the WINS part and for the network adapter. Not if it's a problem with the server version domain is Windows Server 2012 R2.
    I appreciate your help.
    regards
    Miguel Solano

    Hello everyone
    I have a problem to join computers to the domain.
    Well I can not understand Spanish but I guess it is related to RPC. :D
    In that case, you need to make sure your DNS entries are correct in clients NIC. Similar threads here:
    "RPC Server Unavailable" while attempting to Join domain
    Windows
    Server Troubleshooting: "The RPC server is unavailable"
    Mahdi Tehrani   |  
      |  
    www.mahditehrani.ir
    Please click on Propose As Answer or to mark this post as
    and helpful for other people.
    This posting is provided AS-IS with no warranties, and confers no rights.
    How to query members of 'Local Administrators' group in all computers?

  • Failover Cluster Manager : Add node wizard Error " This operation returned because the timeout period expired" Windows Server 2012

    Hi Everybody,
    I have two node cluster and trying to add the third node (which is a Virtual Machine), all nodes are in different subnet and can communication with each other. While adding the third node it gives the error at the end of wizard "  This operation
    returned because the timeout period expired ". My domain controller is 2008 Enterprise Server and nodes are all running Windows Server 2012 Standard Edition. Any idea what is causing the issue.
    thanks 

    Hi,
    Before you add a server (node) to a failover cluster, we strongly recommend that you run the Validate a Configuration Wizard for the existing cluster nodes and the new node
    or nodes. The Validate a Configuration Wizard helps you confirm the configuration in a variety of important ways. For example, it validates that the server to be added is connected correctly to the networks and storage and that it contains the same software
    updates. Please post the error or warning report.
    Please try to install the Recommended hotfixes and updates for Windows Server 2012-based failover clusters:
    Recommended hotfixes and updates for Windows Server 2012-based failover clusters
    http://support.microsoft.com/kb/2784261
    Hope this helps.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Having trouble getting "Set action to take when logon hours expire" to work - Windows Server 2012

    I have a Windows Server 2012 server that allows remote desktop users (sessions are hosted on the server itself). I'm trying to enforce logon hours for these remote desktop users.
    I have specified logon hours for a user and confirmed that they work--they aren't allowed to logon when logon hours are disabled. However, they are allowed to continue a session past their logon hours limit if they are already signed in (which is fine, this
    is the default behavior).
    However, when I try to use the `Set action to take when logon hours expire` option (`User Configuration/Administrative Templates/Windows Components/Windows Logon Options/Set action to take when logon hours expire`), and set the behavior to "Logoff",
    nothing happens--the user can continue their session happily. I've tried applying this policy both for the user's group and for the local computer. I've run `gpresult` for the user and confirmed that the policy is apparently in place.
    I also naively tried the "Force logoff when logon hours expire" option, but that apparently doesn't apply to interactive logins (confusing!).
    Am I misapplying this setting, or do I need to take some other steps to get it to work? I'd be grateful for any input. Thanks!

    Hi,
    Sorry for the late response.
    We can log off and log on again to see whether the setting gets applied.
    According to
    Policy Settings that require a reboot or logon section in the following article, this setting needs a logon.
    Deploying Group Policy Using Windows Vista
    http://technet.microsoft.com/en-us/library/cc766208(v=WS.10).aspx
    Best regards,
    Frank Shen

  • RelayState parameter is full support with ADFS in Windows Server 2012?

    We have implement Single Sign-On with ADFS. (Service Provider - salesforce.com , identity provider - ADFS). When we authenticate with ADFS it will
    authenticate successfully, but it will redirected to salesforce full site instead of mobile site. Salesforce document mentioned that we need to handle RelayState parameter on ADFS. And I saw some article mentioned that 'RelayState' parameter is not fully support
    for Windows Server 2012. Please let us know Windows Server 2012 is fully support for the 'RelayState' parameter and if it is how to handle it on ADFS. Thanks. 

    Hi Prasad,
    Regarding ADFS related issue, I suggest you refer to experts from the following forum to get professional support:
    Claims based access platform (CBA), code-named Geneva Forum
    http://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=Geneva
    In addition, here is a related thread for your reference:
    RelayState Support in ADFS 3.0?
    http://social.msdn.microsoft.com/Forums/vstudio/en-US/25239ff7-a33d-4f3e-a7a8-5a3c47d733f7/relaystate-support-in-adfs-30?forum=Geneva
    Best Regards,
    Amy

  • HT204204 Error invalid number when trying to send a TXT message

    While trying to send someone a TXT on craigslist, I inadvertently sent a TXT to a 7 digit number. I received back the following message (Where <XXXXXXX> is the 7 digit number I tried to TXT).
    I'm using an iPhone 6 (brand new) with the latest iOS. Handoff and TXT message forwarding is set up.
    From +1 (1) (216) 116-11:
    <XXXXXXX> Error Invalid Number. Please re-send using a valid 10 digit mobile number or valid short code. (The message I sent went her).
    After that I attempted to send to the correct 10 digit number but every subsequent attempt to message the correct number has failed. I have tried the following:
    Hard reset of the device.
    Deleting the conversation
    Creating a contact with the correct number
    Using Messages to create a new conversation
    Replying to messages received from the number.
    However nothing I've been able to do resulted in a message getting sent.

    I think your region settings are interfering the format of the US number. What country are your region settings set to?
    This is how they should look: +1 (216) 116-1122
    The +1 is optional when inside the USA/Canada

  • Get error 7 message when trying to open iTunes in windows vista

    All of a studded my windows vista 64 bit computer will not open iTunes. It has a error 7 message. I have tried removing it according to supports instructions with no luck. One problem that I had is that it told you to delete the iTunes folder in the common files and it would not let me do that but everything else deleted.still no luck when I reinstalled, any help would be appreciated. I also tried updating the net framework, no luck.
    Thanks in advance,
    Karlluch

    Karlluch...
    Try here >  iTunes for Windows: "Error 7" message when opening iTunes

  • Error code 2343 when trying to install update on windows 7

    When trying to install the updates to Itunes get this error message. Have tried the downloads direct method, turning off the firewall with same result.
    How can I get it to accept the update

    Hello Mota21,
    Welcome to Apple Support Communities.
    Try following along with the troubleshooting suggestions in the article linked below, they should help you resolve the issue installing the latest version of iTunes on your PC.
    Issues installing iTunes for Windows - Apple Support
    Cheers,
    -Jason

  • . Error ID 23000 - when trying to publish a project.- Project Server 2013

    Error:
    Your queue job ProjectPublish failed. Please contact your administrator for assistance
    Your ProjectPublish job failed.  Its current state is Failed.  It was 0% complete.  It entered the queue at 06/05/2013 16:09:42.
    To get more information about the job failure, please go to Project Web App.  Select Personal Settings from the left menu.  Then select My Queued Jobs.
    The errors returned from the queue are as follows:
     Error ID: 23000
     Error ID: 26000
    Detailed error below - send it to the administrator for more detailed troubleshooting.
    <?xml version="1.0" encoding="utf-16"?>
    <errinfo>
      <general>
        <class name="Microsoft.Office.Project.Server.BusinessLayer.Queue.Message">
          <error id="23000" name="ProjectPublishFailure" uid="7abaf2fb-f1cd-e211-940c-00155d0c1708" projectuid="494fbfae-c1b8-e211-9359-08edb9db97cb" messagetype="Microsoft.Office.Project.Server.BusinessLayer.QueueMsg.SynchronizeTaskListInManagedModeMessage"
    messageID="38" stage="" blocking="Block" />
        </class>
        <class name="Queue">
          <error id="26000" name="GeneralQueueJobFailed" uid="7bbaf2fb-f1cd-e211-940c-00155d0c1708" JobUID="ddafa1ed-f1cd-e211-a5f3-001d0925b148" ComputerName="75cc0cd2-d97d-405c-9115-7722945b1400"
    GroupType="ProjectPublish" MessageType="SynchronizeTaskListInManagedModeMessage" MessageId="38" Stage="" CorrelationUID="fc70229c-ba49-90cf-b140-0bba2cbd6e91" />
        </class>
      </general>
    </errinfo>
    You can do the following:
    1. Try troubleshooting using the error IDs, error XML.
    2. Contact administrator with your jobID (ddafa1ed-f1cd-e211-a5f3-001d0925b148) and error XML.
    To turn off these notifications, go to PWA Settings, and then click Manage My Alerts and Reminders.
    From this page, you can clear the check box for those notifications you no longer want to receive.
    Microsoft Project Server
    ---=======----
    Any Suggestion / Help is greatly apprciated
    Alim

    We get a very similar message when we publish our projects (not project specific and no resources assigned to summary level tasks):
    Your ReportingWSSSync job failed.  Its current state is FailedNotBlocking. 
    It was 0% complete.  It entered the queue at 06/10/2014 17:00:56.
    To get more information about the job failure, please go to Project Web App. 
    Select Personal Settings from the left menu.  Then select My Queued Jobs.
    The errors returned from the queue are as follows:
    Error ID: 24018
    Error ID: 24016
    Error ID: 26000
    Detailed error below - send it to the administrator for more detailed troubleshooting. 
    <?xml version="1.0" encoding="utf-16"?>
      <errinfo>
      <general>
        <class name="Reporting Wss list sync failed">
          <error id="24018" name="ReportingWssSyncListFailed" uid="f8900f4b-e2f0-e311-80d4-005056a93b51" SPListType="81a8f026-4bd4-e311-80d1-005056a9215f" Error="1104" />
          <error id="24018" name="ReportingWssSyncListFailed" uid="aa162251-e2f0-e311-80d4-005056a93b51" SPListType="81a8f026-4bd4-e311-80d1-005056a9215f" Error="1104" />
          <error id="24018" name="ReportingWssSyncListFailed" uid="b3162251-e2f0-e311-80d4-005056a93b51" SPListType="81a8f026-4bd4-e311-80d1-005056a9215f" Error="1104" />
          <error id="24018" name="ReportingWssSyncListFailed" uid="bf162251-e2f0-e311-80d4-005056a93b51" SPListType="81a8f026-4bd4-e311-80d1-005056a9215f" Error="1104" />
          <error id="24018" name="ReportingWssSyncListFailed" uid="c8162251-e2f0-e311-80d4-005056a93b51" SPListType="81a8f026-4bd4-e311-80d1-005056a9215f" Error="1104" />
          <error id="24018" name="ReportingWssSyncListFailed" uid="d1162251-e2f0-e311-80d4-005056a93b51" SPListType="81a8f026-4bd4-e311-80d1-005056a9215f" Error="1104" />
        </class>
        <class name="Reporting message processor failed">
          <error id="24016" name="ReportingWSSSyncMessageFailed" uid="fb900f4b-e2f0-e311-80d4-005056a93b51" QueueMessageBody="ProjectUID='81a8f026-4bd4-e311-80d1-005056a9215f'. ForceFullSync='False'. SynchronizationType='All'"
    Error="RDS failed while trying to sync one or more SP lists. The RDS queue message will be retried." />
          <error id="24016" name="ReportingWSSSyncMessageFailed" uid="ad162251-e2f0-e311-80d4-005056a93b51" QueueMessageBody="ProjectUID='81a8f026-4bd4-e311-80d1-005056a9215f'. ForceFullSync='False'. SynchronizationType='All'"
    Error="RDS failed while trying to sync one or more SP lists. The RDS queue message will be retried." />
          <error id="24016" name="ReportingWSSSyncMessageFailed" uid="b6162251-e2f0-e311-80d4-005056a93b51" QueueMessageBody="ProjectUID='81a8f026-4bd4-e311-80d1-005056a9215f'. ForceFullSync='False'. SynchronizationType='All'"
    Error="RDS failed while trying to sync one or more SP lists. The RDS queue message will be retried." />
          <error id="24016" name="ReportingWSSSyncMessageFailed" uid="c2162251-e2f0-e311-80d4-005056a93b51" QueueMessageBody="ProjectUID='81a8f026-4bd4-e311-80d1-005056a9215f'. ForceFullSync='False'. SynchronizationType='All'"
    Error="RDS failed while trying to sync one or more SP lists. The RDS queue message will be retried." />
          <error id="24016" name="ReportingWSSSyncMessageFailed" uid="cb162251-e2f0-e311-80d4-005056a93b51" QueueMessageBody="ProjectUID='81a8f026-4bd4-e311-80d1-005056a9215f'. ForceFullSync='False'. SynchronizationType='All'"
    Error="RDS failed while trying to sync one or more SP lists. The RDS queue message will be retried." />
          <error id="24016" name="ReportingWSSSyncMessageFailed" uid="d4162251-e2f0-e311-80d4-005056a93b51" QueueMessageBody="ProjectUID='81a8f026-4bd4-e311-80d1-005056a9215f'. ForceFullSync='False'. SynchronizationType='All'"
    Error="RDS failed while trying to sync one or more SP lists. The RDS queue message will be retried." />
        </class>
        <class name="Queue">
          <error id="26000" name="GeneralQueueJobFailed" uid="d5162251-e2f0-e311-80d4-005056a93b51" JobUID="ec900f4b-e2f0-e311-80d4-005056a93b51" ComputerName="54374067-1d9a-4ecf-8b03-917d8b538489" GroupType="ReportingWSSSync"
    MessageType="WSSSyncMessageEx" MessageId="1" Stage="" CorrelationUID="1e9c999c-6bad-d0e0-95e7-d44efff43e4b" />
        </class>
      </general>
    </errinfo>
    Any help would be greatly appreciated!
    Todd

  • Access Denied when trying to add DP to Windows Server 2003

    Hello. My environment is SCCM 2012 SP1. I have a Windows Server 2003 SP2 machine that I need to set a distribution point up on. I have all the prep work complete like IIS installed, local administrator, etc. I have also already setup 300 DPs successfully
    on the same platform but for some reason this one is causing me problems. I have made sure that the secondary server I am setting the DP up from is in the local administrators group. However, I keep getting access denied errors. I have checked and can access
    the ADMIN$ share on the machine. Any ideas what I am missing.
    Failed to install ISAPI on server.lab.local, failed to copy E:\ConfigMgr12\bin\x64\..\i386\smsfileisapi.dll to
    \\server.local.lab\ADMIN$\system32\inetsrv\smsfileisapi.dll, Win32 error = 5

    Hi,
    Have you tried to access  \\server.local.lab\ADMIN$\system32\inetsrv or copy E:\ConfigMgr12\bin\x64\..\i386\smsfileisapi.dll to
    \\server.local.lab\ADMIN$\system32\inetsrv\smsfileisapi.dll using the secondary site computer account?
    Best Regards,
    Joyce Li
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Setup Error 1603 with Exchange 2013 incl. SP1 on Windows Server 2012 R2

    Hello all,
    i've started the installation of a new Exchange 2013 with SP1 in a Windows 2012 R2 environment. New AD, no Exchange previously installed. Exchange ISO from
    Volume Licensing Service Center (Filename: SW_DVD9_Exchange_Svr_2013w_SP1_MultiLang_Std_Ent_MLF_X19-35118.iso)
    All the prerequisites are ok, installed also the “Unified Communications Managed API (UCMA) 4.0″ as requested.
    Setup.exe i've started with "run as administrator" and all went well, until Step 11 of 15 (Mailbox role:Mailbox service).
    Setup stopped and gives an error:
    The following error was generated when "$error.Clear(); 
    Install-MsiPackage `
    -PackagePath ([System.IO.Path]::Combine($RoleLanguagePacksPath, "Setup\ServerRoles\UnifiedMessaging\MSSpeech_SR_TELE.nb-NO.msi")) `
    -PropertyValues ("ARPSYSTEMCOMPONENT=1 ALLUSERS=1") `
    -LogFile ([System.IO.Path]::Combine($RoleSetupLoggingPath, "InstallSpeech-nb-NO.msilog"))
    " was run: "Installing product F:\Setup\ServerRoles\UnifiedMessaging\MSSpeech_SR_TELE.nb-NO.msi failed. Fatal error during installation. Error code is 1603. Last error reported by the MSI package is 'The cabinet file 'EngineInstanceData.cab'
    required for this installation is corrupt and cannot be used. This could indicate a network error, an error reading from the CD-ROM, or a problem with this package.'.".
    Exchange ECP is not working (HTTP Error 404.0 - Not Found), EMS (Shell) is working - if i try a get-mailboxserver it gives me the correct servername.
    Exchange Services are running:
    Running MSExchangeADTop... Microsoft Exchange Active Directory...
    Running MSExchangeAntis... Microsoft Exchange Anti-spam Update
    Running MSExchangeDelivery Microsoft Exchange Mailbox Transpor...
    Running MSExchangeDiagn... Microsoft Exchange Diagnostics
    Running MSExchangeEdgeSync Microsoft Exchange EdgeSync
    Running MSExchangeHM Microsoft Exchange Health Manager
    Stopped MSExchangeIMAP4BE Microsoft Exchange IMAP4 Backend
    Running MSExchangeIS Microsoft Exchange Information Store
    Running MSExchangeMailb... Microsoft Exchange Mailbox Replication
    Running MSExchangeMigra... Microsoft Exchange Migration Workflow
    Stopped MSExchangePOP3BE Microsoft Exchange POP3 Backend
    Running MSExchangeRPC Microsoft Exchange RPC Client Access
    Running MSExchangeServi... Microsoft Exchange Service Host
    Running MSExchangeSubmi... Microsoft Exchange Mailbox Transpor...
    Running MSExchangeTrans... Microsoft Exchange Transport
    Running MSExchangeTrans... Microsoft Exchange Transport Log Se...
    Running MSExchangeUM Microsoft Exchange Unified Messaging
    So, how to proceed ? Try to download a new ISO for Exchange 2013 incl. SP1 and run the setup again ? 
    What happens to the existing  (corrupt) installation of the exchange which is not working ?
    Thanks for your help
    Bruno

    Hi,
    From the error message, the cabinet file 'EngineInstanceData.cab' required for this installation is corrupt and cannot be used. I'm afraid you have to download a new ISO for Exchange 2013 incl. SP1 and run the setup again.
    If it still doesn't work, I recommend you remove the failed Exchange server installation, then re-install Exchange server.
    Best regards,
    Belinda
    Belinda Ma
    TechNet Community Support

  • Active Directory Error 0x51 occurred when trying to check the suitability of server ' servername '. Error: 'Active directory response: The LDAP server is unavailable'. It was running the command 'Get-OwaVirtualDirectory'.

    This issue is driving us nuts - there are no issues with Domain Controllers or AD in this environment.  The server it is citing in the error has been retired - it was gracefully dcpromo'ed down and removed from the environment.  DNS has no record of it, nor is it located anywhere else.  We are not able to log into Outlook Web App either with authentication failed errors - and I can't help but expect these 2 issues are related?  I tried hard coding the Configuration Domain Controller at the org level, as well as using the -staticdomaincontrollers and -staticglobalcatalogservers with the "Set-ExchangeServer" powershell command - no luck....  System settings of the exchange 2010 servers show they are pointing to the correct DCs - but I still get this error accompanied with long delays in rendering windows in EMC.  Extremely frustrating.....  I have an issue logged with MS now, but they aren't looking at them until Nov 9.  Has anyone seen this issue at all?  More info on the OWA config - using Form based auth, and I'm not able to perform a simple test-owaconnectivity -mailboxcredential (get-credential\username) -allowuntrustedcertificate -allowinsecurelogon - please help

    Create a "global catalog" on the 2nd domain contoller, will fix this problem. 
    To create a new global catalog:
    On the domain controller where you want the new global catalog, start the Active Directory Sites and Services snap-in. To start the snap-in, click Start , point to Programs , point to Administrative Tools , and then click Active Directory Sites and Services .
    In the console tree, double-click Sites , and then double-click <var>sitename</var> .
    Double-click Servers , click your domain controller, right-click NTDS Settings , and then click Properties .
    On the General tab, click to select the Global catalog check box to assign the role of global catalog to this server.
    Restart the domain controller.

Maybe you are looking for