Error is coming while activating the z table

Hello ,
I have created a z table .
When i activate this table , i get the following error .
Das Aktivieren von Dictionaryobjekten während des
Einspielens neuer Software ist gesperrt (ITSU01,21.08.2014, 17:16:26).
Google translation of above error is :
Enabling dictionary objects during the import new softwware is locked
(ITSU01,21.08.2014, 17:16:26).
Is this a Basis Error?
Thanks ,
Anuja Dhondge

Hi Anuja,
please ask your Basis team, if Addon Installation Tool SAINT or Support Package Manager SPAM will be processed at the moment.
Regards,
Klaus

Similar Messages

Error coming while activating the data request at DSO level

Hi to all,
please can anybody tell me the solution for that.
While activation the data request at DSO level , i am getting error .
Value 'R2S-11.60UML ' (hex. '5200320053002D00310031002E003600300055004D004C00A0') of char
Error when assigning SID: Action VAL_SID_CONVERT table 0MATERIAL
Process 000001 returned with errors
this error is coming under SID Generation .
I shall be thnakfull to you for this.
Regards
Pavneet Rana

Hi Rana,
Activation failed because of the special characters in the Omaterial
Delete the request in target
edit it in the specific record in PSA and load it back
In your case i think its a space problem u can see a space after L
delete the space for the record and load it again
Regards,
MADhu

Error while activating the BSEG table

hi guys ,
today i joined SAP SCN . I have this error
First i appended a structure of 5 fields in BSEG table .Then i tried to delete this append structure.
But while deletiing it took nearly 20-25 minutes to process and timed out.So the structure is deleted
from BSEG table but those 5 fields are still present in view V_QCMBSEG .Because of this BSEG table
is now partially active .what should i do other than access key .

Dear Deepak,
welcome to SCN.
How did you append structure in BSEG without access key, if you had appended you must have done it will access key as it is a standard table.
secondly, the time out error is because BSEG is a cluster table, and the data volume in Bseg is very large as all the accounting document from various module is stored in this table, hence while deleting it system will check each line item wise before activating the table.
Now the workaround is to check with your basis team to increase the memory index so that time out dump is eradicted and BSG becomes Active.
Best practice: Don't append structure to standard table unless it is very crucial. if you are doing it for some report, kindly do a table join ( BSEG cannot be used as it is a cluster), you will get the same data in various secondary index table, by doing this the performance of the report will be better.
Regards,
M S Lokesh

Warning while activating the z-table.

Hi,
I have created the z-table but when I try to activate it ... I get a warning message
"Key field COUNTER has num. type INT4: Buffering not possible, Transport restricted "...
In the technical settings I have already clicked the radiobutton
Buffering not allowed...
How do I get rid of this warning ... or shall I ignore it ... If I ignore it then how will it impact the fucntionality of the program.
Thank You,
SB.

Is this they key field?
If so, and if this is a customing table, whose entries needs to be transported then the problem might occur while capturing the keys in transport request. Then you need to manually add these entries into transport request.
If not, you can ignore it.
Cheers
Manohar

Error while activating the dictionary table

i have created a table with the name ZAIL_REC_MAIL_ID in development server, while i was trying to activate it is giving a warning message, and it is not allowing to transport the table into production server.
The error is as follows :
Name ZAIL_REC_MAIL_ID is identical or is in same namespace as of a type pool

hi
i think there will be an sap object with teh same name, but couldn't understand why it hasn't thrown teh same msg. while u have created it...so, try just changing the name of the table and activate..moreover, without activating an object, pl don't try to transport..
Sathish. R

Error coming while activating the project

I am using HANA studio with UI5 plugins. I have created a new SAPUI5 Application project.
When after sharing the project i try to activate it. It shows me an error as shown below.
Please suggest what is the issue.
Thanks,
Vishu Agarwal

Hi Vishu,
You can try to change the description in index.html file as shown below as the error shows it supports only UTF-8.
<meta http-equiv="X-UA-Compatible" content="IE=edge">
<meta http-equiv='Content-Type' content='text/html;charset=UTF-8'/>

Error coming while activating ODS

Hi,
While loading data in datasource there is a field item text in which a small box is coming due to which error is coming while activating ODS. When i check line item of datasource it shows me '#' instead of that box.
So i wrote a code in ECC to remove special characters. But still it is not deleting that small box and sending me error in ODS.
The data comes same in the table also with that small box.
Please tell me how to solve that problem as i cant do it manually as there are a lot of records. Do tell me how to remove it.
Roma

Hi Roma,
Actually all the invalid characters in the error message are displayed by small square box only. So you might not get which actual character it is.
Check the below given article for removing special character. In this article they have mentioned one standard FM to remove the characters which you can use in update rule or transformation for filtering invalid characters.
[http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e0cdc928-5e2d-2e10-e1bb-ec77bcb5cbfd?QuickLink=index&overridelayout=true]
Regards,
Durgesh.

Error while activating the request of DSO upload

Hi all,
While activating the request generated during upload to Datastore object,it ends in an erroneous activation giving the following error.
'No SID found for value 'BBL' of characteristic 0BASE_UOM'.
Is it because no translation exists,if so what should be done for the same.
Thanks in advance,
Chintu.

hi Chintu,
it seems unit BBL not exist in your bw system,
you can update the unit master from r/3,
have you performed 'transfer global setting' ?
check in r/3 table t006a (t006*), if exist you can
rsa1->source system->right click r/3 source system
'transfer global setting', in next screen mark 'unit of measurement' (also currency etc) and option 'update table'.
this update should be scheduled periodic, menu program->run in background and schedule periodic job.
if BBL not exist in r/3, you can manualy maintain,
transaction CUNI.
hope this helps.

Error while Activating the Standard DSO

Hi,
I am getting the below error while Activating the Standard DSO.
Characteristic 0DPM_DCAS__0CSM_SPRO: DS object 0DPM_DCAS__0CSM_STAT (master data check) does not exist
I tried searching the forum , but didnt find any answer.
Any suggestions are welcome.
Thank you,
Adhvi.

Hi,
Are you getting the error while trying to activate the DSO data after loading or just while trying to activate the DSO itself.
If it is during the activation of a request,then please check if you have loaded some data in the DSO which doesnt have the corresponding Master Data loaded.For preventing this, you can check in Infopackage/DTP -"No Update without Master Data".
You can also go into RSRV and perform elementary tests for the DSO and check the SID table consistency.
Thanks,
Divya.

Error while activation the Datastore Object

Hi folks,
I am in SAP BASIS, so not aware of BI very much...can u help me in this,
One user is getting error while activation the Datastore Object
below is error log,
(Green) Activation of Objects with Type DataStore Object
(Green) Checking Objects with Type DataStore Object
(Green) Checking DataStore Object DSO_TEST
(Green) DataStore object DSO_TEST is consistent
Table/view /BIC/VDSO_TEST2 (type VIEW) from DataStore object DSO_TEST saved
Change log for DataStore object "DSO_TEST" saved successfully
Writing of object catalog entries (TADIR)
(RED) The creation of the export DataSource failed
(RED) Error during the retrieval of the logon data stored in secure storage
(RED) Error when creating the export DataSource and dependent Objects
(RED) Error when activating DataStore Object DSO_TEST
Thx. in advance
Yash

Hi Yash,
Check out the below thread:
[activation of the Datastore Object.|error in ODS activation/export datasource;
Hope it helps you!
Please reward points if helpful
Manish

Package Check Error while activating the Appended Structure

Hi CRM Gurus,
A structure is appended to a standard structure. while activating the appended structure its throwing Error called-
Package Check for Table/Structure ZCDPR_BW_BUPA_LINKS .
The object TABL ZCDPR_BW_BUPA_LINKS uses SQLT DPR_BW_BUPA_LINKS.
plz help me to get the solution in this regard.
Regards,
Gokila

Hi
 were you able to solve your problem?
 If so please update us. We are also facing same issue while activating the table.
 let us know the solution if you have solved the problem that will help us a lot.
Thanks and regards,
Amit

SID Generation Error while activating the DSO.

Hello Gurus,
Am trying to load the data to a dso in FIGL, the data is getting loaded to the dso very fine, this is extracting data of 1700000. But the problem is while activating the dso it throws an error "Activation of M records from DataStore object.
In dump error, DBIF_RSQL_SQL_ERROR
CX_SY_OPEN_SQL_DB
SQL error in the database when accessing a table.
So please advice me to solve this problem would be appreciated and reward points.
Arun

Hello Arun kumar,
That's easy you have errors in the field 0REF_KEY3.
Since it is a DSO it let's you load everything but in the time of the activation it complains!
The system is trying to generate a new SID for the master data of the InfoObject 0REF_KEY3 with that value (or values) and since it has garbage on it (invalid characters like "!", etc.) it gives you that short dump.
Try to find that record, change it in PSA and reload the request again.
TCode-E3//Rec.Typ-CO
The system don't like that string for generating the SID. Try to eliminate "//" and "." from it. (for test purposes you can simple change it to nothing and see if it passes the load and activate again)
Try to see if you have more records like those and fix them too.
That should work.
Please assign points if it helps,
Diogo.

HR Stadard Cube 0PA_C01: error while activating the transformation

Hello,
I have migrated the data source 0HR_PA_0 to version 7.
While activating the transformation to HR standard cube, the start routine has the following error:
E:Field "COMM_STRUCTURE-EMPLOYEE" is unknown. It is neither in one of the
specified tables nor defined by a "DATA" statement. "DATA" statement.
Where as the migrated source 0HR_PA_1 to standard cube works fine.
Thanks & Regards,
Savitha

Dear Neelesh,
The infosource Generated from 3.x InfoSource Employee
is part the flow.
The flow has
TRCS BI7_HR_PA_0 -> CUBE 0PA_C01
Generated from 3.x InfoSource Employee
RSDS 0HR_PA_0 NEWSR31007 -> TRCS BI7_HR_PA_0
Data Source : Employee
Thanks & Regards,
Savitha

Getting error while activating the smart form

hi guys,
i am getting the following run time error while activating the smart-form.
'SQL error in the database when accessing a table'.
can anyone tell why this error is coming

Refer to the below link, it may help you to close the thread.
[SQL error in the database when accessing a table|SQL error in the database when accessing a table.;
Regards,
saiRam

Error while creating the DWH tables using DAC

Hi,
I am getting error while creating the DWH tables using DAC. I have created a ODBC DSN using merant driver with DAC repository DB credentials and the test connection is successful. And while creating the tables i gave the olap dw credentials and the DSN name which i created earlier. But it throws the error as below:
Please find the below mentioned error message
=====================================
STD OUTPUT
=====================================
CREATING SIEBEL DATABASE OBJECTS
F:\DAC\bifoundation\dac\UTILITIES\BIN\DDLIMP /I N /s N /u infdomain /p ******* /c DB_DAC /G "SSE_ROLE" /f F:\DAC\bifoundation\dac/conf/sqlgen/ctl-file/oracle_bi_dw.ctl /b "" /K "" /X "" /W N
Error while importing Siebel database schema.
=====================================
ERROR OUTPUT
=====================================
Siebel Enterprise Applications ODBC DDL Import Utility, Version 7.7 [18030] ENU
Copyright (c) 2001 Siebel Systems, Inc. All rights reserved.
This software is the property of Siebel Systems, Inc., 2207 Bridgepointe Parkway,
San Mateo, CA 94404.
User agrees that any use of this software is governed by: (1) the applicable
user limitations and other terms and conditions of the license agreement which
has been entered into with Siebel Systems or its authorized distributors; and
(2) the proprietary and restricted rights notices included in this software.
WARNING: THIS COMPUTER PROGRAM IS PROTECTED BY U.S. AND INTERNATIONAL LAW.
UNAUTHORIZED REPRODUCTION, DISTRIBUTION OR USE OF THIS PROGRAM, OR ANY PORTION
OF IT, MAY RESULT IN SEVERE CIVIL AND CRIMINAL PENALTIES, AND WILL BE
PROSECUTED TO THE MAXIMUM EXTENT POSSIBLE UNDER THE LAW.
If you have received this software in error, please notify Siebel Systems
immediately at (650) 295-5000.
F:\DAC\bifoundation\dac\UTILITIES\BIN\DDLIMP /I N /s N /u infdomain /p ***** /c DB_DAC /G SSE_ROLE /f F:\DAC\bifoundation\dac/conf/sqlgen/ctl-file/oracle_bi_dw.ctl /b /K /X /W N
Connecting to the database...
28000: [DataDirect][ODBC Oracle driver][Oracle]ORA-01017: invalid username/password; logon denied
Unable to connect to the database...
any help is appreciated.
Thanks,
RM

The fact that you are getting an "ORA-01017: invalid username/password; logon denied" message indicates that you are at least talking to the database.
The log shows that username "infdomain" is being used. Can you double check the username and password you have in DAC in a SQL*Plus/SQL Developer session?
Please mark if useful/helpful,
Andy.

Error is coming while activating the z table

Similar Messages

Maybe you are looking for