Error - '' is not a valid boolean value
I have been receiving the error message = '' is not a valid Boolean value quite frequently. It doesn’t matter which hierarchy I am in but it’s typically when I do an Add or Insert. When selecting ‘ok’ on the error message, I’m able to continue on with my work but was just curious what causes this error. Sometimes when this error shows up and I click ‘ok’, it will take me out of the DRM screen and into whatever else I may have open at the moment. Any thoughts or ideas? We are on version 11.1.1.2.103
As Murali stated-
It could be a property incorrectly configured, check all the boolean type properties and see if any of them are getting a string value by any chance.
Thanks
Denzz
Similar Messages
-
Error of "Not a Valid Win 32 application " installing 7.0 for iPod Shuffle
I have downloaded the apple Itunes 7 software and I get an error of : Not a Valid Win 32 application I have windows xp I have been trying to figure this out for a couple of hours.
All I can figure out is that it is because I have dial up and not a broadband connection (which is one of the requirements for 7.0). If this is the problem, what do I do to get around the not having broadband?
Any help would be greatly appreciated!!!! I would love my new present to work! PS. a family member already has an Ipod Nano installed, can we use the same iTunes?I have downloaded the apple Itunes 7 software and I
get an error of : Not a Valid Win 32 application I
have windows xp I have been trying to figure this out
for a couple of hours.
All I can figure out is that it is because I have
dial up and not a broadband connection (which is one
of the requirements for 7.0). If this is the
problem, what do I do to get around the not having
broadband?
Any help would be greatly appreciated!!!! I would
love my new present to work! PS. a family member
already has an Ipod Nano installed, can we use the
same iTunes?
I found that I had a bad (not complete) download. After redownloading 7.0 and installing it, it worked great. Hope this helps other with my same problem. -
Error - 2048 not a valid movie file
hello,
I'm a NAPP member and had been following the photoshop TV casts on QT....however, now I get the error message 'error - 2048 not a valid movie file'...its an mpeg4 QT file, but I get the message whenever I attempt to play the downloaded file...or when I try to just watch the stream, it won't open the URL...these are the only movies that I'm having this problem with...as I can watch other movies from other sites w/o incident...NAPP hasn't replied to my inquiries except that they don't support the TV shows.
Any ideas?...would be appreciated...
Thanks...
G5 - dual 1.8 ghz - 2ghz ram Mac OS X (10.3.7) Dell Inspiron Core Duo notebook w/ XP homeT S
Thank you very much for the link to videolan.org. I was having the same problem playing downloaded Photoshop TV videos. I tried MPlayer which worked but was not comprehensible. I had never heard of videolan, but it works like a charm.
Thanks again.
17 PowerBook, 1.33 Ghz Mac OS X (10.4.6) 2 GB Ram, iWeb 1.1.1 -
After upgrading to version 31.3, error in updating RSS feeds.
Error message - not a valid feed.
Unable to Attach screen shot of feed validator resultsThe answer is in the guide, please read it carefully:
https://support.mozilla.org/en-US/kb/how-subscribe-news-feeds-and-blogs
You can turn on extreme debugging as well. The problem is always with the publisher failing to follow specs; inform them to do so. -
QAAWS error message "not a valid query"
Hi,
When I'm trying to connect to QAAWS I get this error message: "not a valid query. FWB 00025".
Does anyone know how to solve this problem?
The server where the BOE is installed on has been restarted a couple of times but it doesn't help.
Universe Designer and WebI work fine.
Thanks!Is QaaWs running properly on your system?
To validate the installation, open a browser and type the following URL
http://[server]:[port]/dswsbobje, where [server] corresponds to
your web server address and [port] corresponds to the port where you
set up in your web server. The default used by Tomcat is 8080. dswsbobje
is the default name of the Web Service provider web application. Then Validate. -
Pages is not saving document correctly. After saving the changes either do not appear or you can not open the file. The error is "not a valid format" I am in Pages '09 4.1 (923). I also use Parallels. Anyone having similar issues?
I'm not sure that Lion AutoSave feature apply to network servers.
I'm just sure that the Versions feature doesn't.
Yvan KOENIG (VALLAURIS, France) samedi 21 janvier 2012
iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My Box account is : http://www.box.com/s/00qnssoyeq2xvc22ra4k
My iDisk is : http://public.me.com/koenigyvan -
Error message 'not a valid PDF document'
Hi folks,
my Z10 has trouble opening some PDF documents sent as email attachment. When I try to open them the error message appears:
Important message
The document cannot be opened because it is not a valid PDF document
There is no BES10 Service involved in my environment. Mails are synced with with active sync.
OS Version: 10.2.0.429
Any suggestion appreciated.
Best regards,
RAUMPATROUILLEStuffit is the only app I know of which can decompress its own format. Your Windows clients must use the free Expander to open them. Otherwise, use OS X's built in zip compression and they'll be able to open the files without the need of third party software. Right click on any item, or group of items and choose, "Compress xxx Items" (how it will read if more than one item is chosen).
-
Loading versions 4.3 & 4.2SP2, error message: "not a valid Win32 app"
Hello, I've been trying to install two versions of BDS, and both download fine, but upon clicking on the icon to install, I get the error message: "(name of app) is not a valid Win32 application".....does anyone know what the heck this means and how to fix it? Thanks much, Aaron Worley
Hi, I'm having the same problem. Has anyone got an answer.
I suspect it could be something to do with x64?
Help? -
Infopack Error ( does not contain alpha conforming value 10)
When I try to run my infopack which pulla data from BW into APO, the data load fails with the error below:
"InfoObject /BIC/XXXX does not contain alpa-conforming value 10" when I click on the details icon, I get the following description.
Can somebody please throw some light on this as I am new to DP/BW. Appreciate your help if someone can help me with fixing this problem.
Diagnosis
The system checked whether the loaded InfoObject value conforms to the
conversion exit.The check failed.
For example:
The value '1' was loaded into an InfoObject with alpha exit, even though
the value '0000000001' was expected.
System response
The load process has failed or the erroneous records are displayed in
the monitor. This does not depend on how error handling is set up.
Procedure
Find out why the data does not conform to the conversion exit, and, if
possible, correct the cause. Possible causes are errors in Business
Content or an error in a customer exit in the source system.
If you cannot correct the problem, you have the option of removing the
conversion exit on the InfoObject. However, since the system has already
been converted, duplicates appear in the system again.
Thanks
VarunHello Varun,
BW expects your Key Figures to be stored in "alpha conforming format". This is can be roughly described as having 0s in front. For example, if your key figure value is 10, then the alpha conforming value of that is 000000000000000010 (assuming the number of chars in your KF is 18).
To correct the error do the following:
In your transfer rule in BW for InfoObject /BIC/XXXX, implement an ABAP routine that calls function module CONVERSION_EXIT_ALPHA_INPUT. Here an example of the ABAP code you should put in your transfer rule for /BIC/XXXX:
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = TRAN_STRUCTURE-/bic/xxxx
IMPORTING
OUTPUT = RESULT.
Hope this helps. Please post again if you have questions. -
Publishing iCal: getting error "is not a valid location for this request"
I am trying to publish an iCal calendar to my own website via my iSP. My isp says they are already WebDAV so I don't need to turn it on. I have also gone over my url with them repeatedly to make sure I am entering it correctly. And still, I am getting an error that publish failed because it is not a valid location for the request.
Any advice welcome...Ignore this question. My webhost who has insisted for the past 45 minutes they ARE WebDAV enabled, actually aren't!
-
Hi
Is there anothe product for enabling flash content.Pallavi,
Adobe Presenter is a plug-in application to MS PowerPoint that allows you to add video, audio, Flash and quiz content in to a presentation and then author it out as a Flash based presentation that can the be delivered to others via the web. You are asking about enabling Flash content. In what browser/application are you needing to enable Flash Content?
The 'Not a valid presenter' message is most likely due to you not have the rights to author content to Harvard's e-learning system, but without knowing if the URL is for a Connect account or some other e-learning platform, it's hard to give any useful insight. -
Error message, not a valid win32 application
Please help if you can, because I am new to computers. I have downloaded itunes (setup), which is only 11 meg, but it should of been 56 meg. When I click on it now, it say's run, then itunes setup exe is not a valid win 32 application.
I have tried this about 4 or 5 times, even deleting the whole file and re-installing several times. Please help, many thanksHave you had a look at this troubleshooting page? It may be of some help: iTunes: Windows reports that iTunesSetup.exe is not a "valid Win32 application"
-
Error Message "not a valid Windows CE application?"
Hi,
I build an executable using PDA module and try to open it up on Pocket PC, but it says "FILENAME is not a valid Windows CE application" every time. Can any one give me a pointer or two?
Do I have to install a thing or two onto the Pocket PC system before doing anything? I am using Windows CE .NET 4.2
hellolvHello,
The best place to get
started with the requirements is the datasheet.
You can also find the information in the PDA module manual.
I’m not convinced that
a previous post was correct (http://forums.ni.com/ni/board/message?board.id=170&message.id=160316&requireLogin=False). Have you seen this tutorial for Windows CE?
I apologize for the confusion! Please review these documents and let me know
if you have any additional questions.
Travis M
LabVIEW R&D
National Instruments -
Error message "Not a valid Win32 application" when I try to install
I have downloaded the setup software several times but I cannot get any of it to load. I get the message that it is not a valid Win 32 application. I am running Windows 7. I have no problems with Thunderbird on other machines. There are no help paragraphs anywhere in your system that address this issue - at least not using the available public index.
if the installer is not valid, it will be because it has been corrupted in the download process. Usually by an over helpful anti virus program. As the installer is basically a 7Zip executable some corporate system will not allow the executable to run as it contains a ZIP file.
-
After conversion error reading not a valid Win32 application please help
After uploading and converting my pdf to excel, i can not openthe file it reads not a valid Win32 application, what have I done wring
thanks
WWGood day WW,
It sounds like the extension for the file may have been stripped when you downloaded the file after conversion. Try renaming the file with a .xlsx extension or convert the file again and ensure it saves to your hard drive with a .xlsx file extension.
Kind regards,
David
Acrobat Community Manager
Adobe Systems
Maybe you are looking for
-
65L7300U LED No longer connects to the internet
Just bought this LED. Was able to set it up yesterday just fine. Came back today and TV is unable to connect to the internet. It says it can't find the access point [although, it sees every available wireless network]. Anyone have any ideas? Is
-
Please help me!!!!!!Super !!!!!
OK i have a cupple of ipods.but the thing is i have a old seris .the scroll wheel.u know the first generation 5 gb ipod.its the one with the wheel that moves....anyways..i have a windows xp and i have a fire wire to a usb.......and i need help with t
-
This morning I inserted a Cd into my dvd/cd drive in my macbook pro and it read the disc but when I ejected it a small screw came out too had to remove the screw before the disc would come out Before ths happened the cd drive would make an unusual so
-
Hi All, I would like to know if it is possible with a post condition or something else, to skip and go to another step from another jobchain and not its own jobchain. Here is an example, let's say we have : - a jobchain A contains 2 steps step 1: job
-
I have a new iPad and setting it up for visitors to watch videos at a local historical society. I can lock down the unit and restrict access to almost everything, including the home button. The unit is mounted on the wall and then mirrored to a TV