Error: Javaw.exe - Entry point not found

Hi,
I've stuck in a problem during following the OWB runtime repositiory Assitant
i got a error message
javaw.exe - entry point not found
The procedure entry point OCIconnectionpoolcreate could not be located in the dyanimic link library OCI.dll
Plz help
Edited by: Nitesh Bhagat on Mar 18, 2009 8:29 AM
Edited by: Nitesh Bhagat on Mar 19, 2009 7:02 AM

Hi Nitesh.
Is there any other error message or details?
Wich version are you using? What are you trying to do in the assistant (create rep, drop rep, ...)? Did this software ever worked or is this a new installation?
Usually, this is related to the PATH variable and a new installation of other oracle products.
If this persists, try deinstall a install OWB again.
Good luck!
Marcos

Similar Messages

  • Javaw.exe – Entry Point Not Found

    Hi,
    I am using OWB 9.2, OS is Windows XP Prof., while using Runtime Assistant to create Runtime Repository Owner, I am getting the following error:
    Javaw.exe – Entry Point Not Found
    The procedure entry point kadgetembtype could not be located in the dynamic link library oraclient9.dll
    But after clicking many times it goes to next screen, if I click Next button, then again it displays the same error message said above, clicking many times it goes to next screen. The error message continues till the end of the process. Even when the progress bar shows how much percent it is created, the error message displays and I need to click on the OK button of the error message till it goes.
    Can anybody let me know why this strange behavior. This is the first time I am facing this type of problem.
    Thanks.
    Liyakat

    Try changing your Oracle home order so that OWB home is the first home in your list, or change the PATH variable so that OWB folders are before any other folders in the variable.
    Hope this helps,
    Mate

  • Why is my itunes not installing properly? I installed it and it was fine, then it started to show Errors. iTunes exe - Entry Point not Found. And the Error 7 (Windows error 127).Itsays to reinstall iTunes. I did that and same error. new pc, same on old

    Why is my itunes not installing properly?
    I installed itunes day before yesterday,  I spent hours last night linking all my music photograph and movie files, its a new windows 8 laptop.
    I plugged in my 64GB ipad 3 rebooted it and reloaded all the information I wanted on it, took hours... finally completed this this morning. After this I restarted the laptop to configure my icloud link for the laptop (which I installed last night while I was loading files, I chose to restart later)
    on completion I turned my laptop off for a few hours, when I turned it back on I went to itunes to connect my iphone to do the same and I got this message:
    iTunes exe - Entry Point Not Found
    The procedure entry point
    AVCFPlayerAppliesMediaSelectionCriteriaAutomaticallyKey could not
    be located in dynamiclink library F:\Programmes\iTunes.dll
                                                                                               OK
    then after pressing 'OK' the following message:
    iTunes
    iTunes was not installed correctly. Please reinstall iTunes
    Error 7 (Windows error 127)
    I went back to apple website to reinstall iTunes, first reinstalled it same again, then unsinstalled it and the reinstalled it, same again.
    The same thing happened with my old lap top and I replaced it with this new one at the start of the week.
    Has anyone any idea what is going on and how to rectify this problem, I am now going on 3 weeks without iTunes.
    Regards,
    Damian36

    I started up and plugged in my iPad  and then the following message came up:
           iTunes
    ❗️This iPad cannot be used because the required software is not
        Installed. Run the iTunes installer to remove iTunes, then install
        the 64-bit version of iTunes.
                                                                                             OK
    I then proceeded to the "iTunes64Setup" expanded folder to load "AppleMobileDeviceSupport64"
    Started the install and then received this message:
          Apple Mobile Device Support
    ❗️Service 'AppleMobile Device' (Apple Mobile Device)
        failed to start. Verify that you have sufficient
        Privileges to start system services.
       Abort.               Retry.                Ignore
    I tried all tree options, last being ignore.
    I continued to download the other 2 you suggested with out any drama.
    I did a system restart and then opened iTunes.
    Connected my iPad
    Then message appears:
          iTunes .exe - System Error
    ❌ The program can't start because CoreAdioToolbox.dll is missing from
          Your computer. Try reinstalling the program to fix the problem.
                                                                                           OK
    Press OK and then the next message:
           iTunes
    ❌ iTunes was not installed correctly. Please reinstall iTunes.
          Error 7 (Windows error 126)
                                                                                           OK
    Any suggestions?

  • Crystal Reports 2008-Vista-ERROR-crw32.exe Entry Point Not Found in dll

    Hi Experts,
    I just installed the Crystal Reports 2008 (with SP0) on my Vista (Home) machine.  When I try to start the CR 2008, I am getting the below error message:
    Error Title: crw32.exe - Entry Point Not Found
    Error Message: The procedure entry point ?PrintLegend@CMapXLegend@CSLib300@@QAEXJJJJJ@Z could not be located in the dynamic link library cslibu-3-0.dll
    Here are the things I tried to resolve the above problem:
    1) Uninstall and Reinstall the CR 2008.  -  No change.
    2) I configured the DEP to accept Crystal Reports (Performance - Advanced - DEP allow). 
    None of these seem fix the problem. 
    Can you please help me kick start the Crystal Reports 2008? 
    Thanks,
    Arun

    Please try with this:
    Run a command prompt as administrator. From the start menu, select "All Programs", then "Accessories" and right-click on the "Command Prompt" shortcut and choose "Run As Administrator". From here you can use the following command to disable Data Execution Prevention (DEP) with the following command:
    bcdedit.exe /set nx AlwaysOff
    Keeping your command prompt open, run your setup or other process being stopped by DEP. Then, to turn it back on again, do the same and run the following:
    bcdedit.exe /set nx AlwaysOn
    Regards,
    Shweta

  • Error: iTunes.exe Entry Point Not Found

    I recently upgraded my iTunes to the latest version and am now receiving the following error when I try to open it:
    "iTunes.exe - Entry Point Not Found
    The procedure entry point kCMByteStreamNotification_AvailableLengthChanged could not be located in the dynamic link library CoreMedia.dll."
    and when I click ok it then gives me this error message
    "iTunes was not installed correctly. Please reinstall iTunes.
    Error 7 (Windows error 127)"
    I have tried the following several times:
    reinstalled/repaired iTunes
    reinstalled/repaired QuickTime
    reinstalled/repaired Apple Software Update
    reinstalled/repaired Apple Application Support
    none of which have worked.  I get the error each time i try to open iTunes and then it just shuts down.
    I have also tried to open iTunes in safe mode - per a recommended solution on another thread - which does not work.  And I changed my control panel/quicktime/audio settings to safe mode - per a recommended solution on another thread - which does not work.
    I have not added any other new software
    I am on an old lenovo T61 laptop with Windows XP
    Any and all suggestions would be greatly appreciated. 
    Thanks in advance!
    Charles

    This thread has a solved star:
    http://discussions.apple.com/thread.jspa?messageID=3918542

  • Error: EdgeInspect.exe - Entry Point Not Found

    I'm getting the following error message when launching the Adobe Edge Inspect:
    ---------------------------EdgeInspect.exe - Entry Point Not Found---------------------------The procedure entry point SetGestureConfig could not be located in the dynamic link library USER32.dll. ---------------------------OK   ---------------------------
    Followed by another dialog mentioning C:\Program Files (x86)\Adobe\Adobe Edge Inspect\EdgeInspect.exe Edge Inspect has stopped working
    More details:
    Problem signature:
      Problem Event Name:          APPCRASH
      Application Name:          EdgeInspect.exe
      Application Version:          1.0.372.4762
      Application Timestamp:          51098b6d
      Fault Module Name:          USER32.dll!SetGestureConfig
      Fault Module Version:          6.0.6002.18541
      Fault Module Timestamp:          4ec3e39f
      Exception Code:          c0000139
      Exception Offset:          0006f52f
      OS Version:          6.0.6002.2.2.0.256.6
      Locale ID:          1033
      Additional Information 1:          9d13
      Additional Information 2:          1abee00edb3fc1158f9ad6f44f0f6be8
      Additional Information 3:          9d13
      Additional Information 4:          1abee00edb3fc1158f9ad6f44f0f6be8
    I tried googling but I haven't found any solutions, so I thought I'd ask for help here.

    No, there is no timeline like that. Vista support for any product will vary from team to team depending on a huge variety of factors.
    For us, we're not even sure why it no longers works on Vista. As I said above, it could be a recent change we made or a change in one of the libraries we use with the desktop application. The solution is nowhere near as simple as posting the older version of the desktop application. Edge Inspect is a system of multiple pieces that all have to work together and be able to communicate with each other. Even if we posted the older version of the desktop piece, it's likely that you'd find Edge Inspect features that didn't work because the other pieces no longer spoke to it correctly. It would get progressively worse with each release until it stopped working entirely. And we simply don't have the resources to support a Vista version of the desktop application and keep it up to date with all the other pieces of the application.
    We never devoted any of our limited dev or testing resources to testing on Vista and can't start doing that now. In our original FAQ we noted that it was not supported but that we didn't know of any issues with Edge Inspect running on Vista. That's now changed. I've updated the FAQ, and we'll be modifying the installer to reflect the new situation.
    I'm sorry, but the final word from engineering and product management is in, Edge Inspect does not support Vista.

  • When I start my computer the following error: AppleSyncNotifier.exe Entry Point Not Found Procedure entry point xmlTextReaderName could not be located in the dynamic link library libxml2.dll

    After updating to iTunes version 10.5, every time I start the computer the following error message appears: AppleSyncNotifier.exe - Entry Point Not Found. Procedure entry point xmlTextReaderName could not be located in the dynamic link library libxml2.dll? Please help

    Thank you Allan123.
    I have used iTunes 10.5.1 for a while without any problem but the other day I installed an application that wanted to restart my computer and iTunes did probably not shut down properly which probably caused the problems. I had to search for libxml2.dll though. Two other programs on my PC used a with the same name but I copied the one from the an Apple folder of course and pasted it where u suggested and after that everything was fine. I have no idea why this problem really occured without any real reason. But thanks for the solution!

  • Error : Photoshop.exe - Entry Point Not found

    I have downloaded Photoshop cs6 trial and when i click the Photoshop icon to open the software i get a window:
    Photoshop.exe - Entry Point Not found
    The procedure entry point GetLogicalProcessorInformation could not be located in the dynamic link library KERENEL.32.dll."
    -Jitu

    Install SP3. It's required in order to run Photoshop on Windows XP.
    http://www.adobe.com/products/photoshop/tech-specs.html

  • SAP 7.1 Error - saplogon.exe - Entry Point Not Found

    'The procedure entry point CleanUp could not be located in the dynamic link library convlib.dll'
    The above error is received when SAPLogon Icon is clicked.
    I installed SAP 7.2 and then removed it and installed SAP 7.1 and then unfortunately tried this install/uninstall a number of times, and in some instances because it was taking so long I think my session cancelled on me during the installations.
    However, in the end I tried installing SAP 7.1 and the following errors were reported in a log:
    File Install The system cannot find the path specified.  C:\Program Files\Hewlett-Packard\PC COE 3\OV CMS\Lib\cache\SAP_SAPGUI07_EN\SapGui\sapdatap.ocx C:\Program Files\SAP\FrontEnd\SapGui\sapdatap.ocx -2147024893
    File Install The system cannot find the path specified.  C:\Program Files\Hewlett-Packard\PC COE 3\OV CMS\Lib\cache\SAP_SAPGUI07_EN\SapGui\sapcltfc.ocx C:\Program Files\SAP\FrontEnd\SapGui\sapcltfc.ocx -2147024893
    File Install The system cannot find the path specified.  C:\Program Files\Hewlett-Packard\PC COE 3\OV CMS\Lib\cache\SAP_SAPGUI07_EN\SAPgui\SAPfewut.dll C:\Program Files\SAP\FrontEnd\SAPgui\SAPfewut.dll -2147024893
    When I looked into this it appears that the install was trying to write to the following destination paths:
    C:\Program Files\SAP\FrontEnd\SAPGui\
    C:\Program Files\SAP\FrontEnd\SapGui\
    C:\Program Files\SAP\FrontEnd\sapgui\
    The only directory that is present on my drive is:
    C:\Program Files\SAP\FrontEnd\SAPgui\
    All the files that it says are missing are present but maybe the SAP Logon.exe maybe looking for the above path variants.
    However when I try to create a new path with say SapGui, it asks to merge with SAPgui and does not create a new path.

    Good Afternoon -
    If you are not working in a Citrix environment, and you are sure that the client has administrator access on the desktop on which you are working. I would recommend the following:
    1. Shut down SAP Logon - In the service tray, right click on the SAPLogon icon and select "Shut Down SAP Logon"
    2. Uninstall ALL versions of SAP GUI - If you go to control panel --> Programs and features --> Look for "SAP GUI for xxx" and uninstall all occurences (There should be only 1)
    3. Open Windows explorer, and navigate to "c:\Program Files\SAP", then delete folder "FrontEnd"
    4. Download the desired version of SAP GUI for Windows you require
    5. Install using the standard windows install procedure
    Please be advised, that support for SAP GUI for Windows 7.20 will be stopped soon, and you will have to upgrade to SAP GUI for windows 7.30. See SAP Note :
    https://service.sap.com/sap/support/notes/147519
    You should start planning the upgrade to release 7.30 as soon as possible since SAP GUI for Windows 7.20 will be out of maintenance as of 9th of April 2013.
    regards,
    Ronald Meyer

  • Error   Acrobat.exe - entry point not found    the prodedure entry point PropVariantToString could not be located in the dynamic link library Propsys.dll

    when trying to save a file which I changed, the file will not save and I receive the following.
    the prodedure entry point PropVariantToString could not be located in the dynamic link library Propsys.dll
    New Windows 7 computer, new Acrobat standard installation. 
    How do I fix this? 

    Hi Kathie,
    Does this happen with a specific file?
    Have you tried updating Acrobat to the latest patch v11.0.09 and checked?
    Please try repairing Acrobat from the 'Help' menu and check if you still face the issues.
    Regards,
    Rave

  • Getting error "Firefox.exe - entry point not found"- "procedure entry point ?alloc@nsmemory@@sapaxi@z could not be located in the dynamic linc library xpcom.dll" alot.

    Some sites worse than others. Seems to be triggered to adds loading as sites load. Must close error multiple times as pages load to continue to load the page. This is becoming real annoying.

    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
    Create a new profile as a test to check if your current profile is causing the problems
    See [[Basic Troubleshooting#Make_a_new_profile|Basic Troubleshooting: Make a new profile]]
    There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins"
    If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
    See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

  • Error in ERP 6.0 Rapid Installer - "brconnect.exe - Entry Point Not Found"

    Hi
    I have the installer for ERP 6.0 + NW 7.0, but option "SAP System" was missing in installation menu.
    Then I downloaded ERP 6.0 (Rapid Installer, Oracle) from market place
    Followed the following steps
        - Install Oracle 10.2.0.1.0
        - Install downloaded ERP 6.0 (Rapid Installer)
        - But this stopped with an error
            brconnect.exe - Entry Point Not Found
                The procedure entry point longjmp could not be located in the dynamic link library orauts.dll.
    orauts.dll is oracle' client dll
    When I checked BRTool' version using command
        *************************************************************************************************************************C:\Documents and Settings\Administrator.CING4468>brtools -V
    BR0651I BRTOOLS 7.00 (6)
    Patch   Date     Info
    release note               849483
    kernel release             700
    patch date                 2005-08-31
    patch level                6
    make platform              NTintel
    make mode                  OCI_10103_SHARE
    make date                  Sep 19 2005
    Here make mode is "OCI_10103_SHARE"
    Rapid installer guide as well as documentation shows that this setup supports Oracle 10.2 but BRTools version shows compatibility with 10.1.
    Is it error because of database version mismatch?
    Thanks !
    Ruhi Hira

    Check for the ora<sid> group and also check the env variable for ora<sid>. This should solve the issue.

  • Couldn't start after effect cs4 ( AfterFX.exe - entry point not found ) ( aif_ogl.dll )

    Please Help me!
    I Couldn't start after effect cs4. I also uninstalled and reinstalled it many times but it's giving me this error :
           AfterFX.exe - Entry Point Not Found
    The procedure entry point wglSwapMultipleBuffers could not be located in the dynamic library ........................ \Aif_ogl.dll.

    It means your graphics hardware is not compatible. Update the graphics driver and configure it suitably.
    Mylenium

  • APSdaemon.exe entry point not found? also itunes won't open.

    ever since i updated my itunes/quicktime, this has been popping up at startup. today i tried opening itunes and i also got an error "itunes.exe entry point not found. the procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll". earlier, i had an error with sqlite3 but i managed to fix it my copying the file elsewhere.
    not sure whats going on though. thanks for the help in advance.

    Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
    Let's try something relatively simple first. Restart the PC. Now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair".
    If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post:
    Re: I recently updated to vista service pack 2 and I updated to itunes

  • Error message when clicking on links from thunderbird: Firefox.exe – Entry Point Not found

    When I click on any link in a Thunderbird email message I get the error message:
    Firefox.exe – Entry Point Not found
    The procedure entry point ?DllBlocklist_Initialize@@YAXXZ could not be located in the dynamic link library T:\PQligP sFuvy (X86)\pJPpSox HneiCFv\GwCMqTQ.Oqt.
    I tried uninstalling Firefox 27 completely and reinstalling it, and the error is still there. When I uninstall V27 and install the older V26 the error disappears. Id there an issue with V27 trying to work with links from Thunderbird?
    I am on a laptop running Windows 8.1 with all current downloads.

    Thanks for the reply - as best as I can tell it seems to be some kind of incompatibility between Thunderbird V24.3.0 and Firefox V27. If I install Firefox V26 then everything works as it should. I haven't tried installing a previous version of Thunderbird to see if that makes a difference.

Maybe you are looking for