Error "JRE not in Configuration File"

I have made sure my browser is Java activated that that all issues in the FAQ are done. I can not find JAVA in my control panel and when I manually execute the java file, I get the error "JRE not in Configuration File." I found some errors in my registry file using regedit. JavaSoft did not have the proper permissions. I added the permissions and now after executing the java 1.4.2_05 file I get the that error when I open the coffee cup. Is something else missing in my registry.

This thread should help.

Similar Messages

Topology Services Applet error: "No JRE found in configuration file."

Is there an issue with IE7 and opening up Topology Services? Or can someone guide me in fixing this error message?
I'm using LMS 3.1 and had uninstalled all of my Java versions and installed jre-6u5-windows-i586-p_withjacorb.exe on my client. However, when I clicked the Topology Services link I would get the Java splash window for a bit and then nothing happened (the next two applet windows wouldn't load).
When I tried to launch Topology Services from another box using IE6, everything worked fine. I tried the same steps above on another box with IE 7 and that worked fine too.
So I tried a few installs and uninstalls of different Java versions and found that if the version was other than 6_5, I'd get the Java splash screen with the first applet window telling me I had the wrong version. When I'd uninstall all Java versions again, reboot, then install the correct Java version, I wouldn't get anything past the first Java splash screen. After a few attempts at this, I now receive the following error when I click on Topology Services, "Bad installation. No JRE found in configuration file."
How can I get to this configuration file on my client to let it know that I do indeed have the right version of Java on my box?
--Jeff

Campus 5.1 works just fine with IE 7.0 and JRE 1.6.0_5. It sounds like this particular client may be in bad shape. Typically, I recommend one uninstall all versions of Java from a client, reboot, then install the one version that comes with LMS. I also recommend that for IE, one adds the LMS server as a Trusted Site in IE. You might also try disabling anti-virus software temporarily to see if that helps.
For Campus 5.1, you will also need to open TCP ports 42342 and 43242 from client to server.
It may be that this client is in such bad shape that it will need to be rebuilt to get Java working correctly.

Error while updating the configuration files (MOB20003)

hi,
After installing the BI 4.0 server, i am trying to configure mobile using mobile server configuration tool. When i enter all the information for non Blackberry option as i would like to access through ipad, its giving me the error message" Error while updating the configuration files (MOB20003)" Please advise.

Hi Somesh,
If i am not wrong, only a war file deployment is needed to make ipad work.
This happens with URL hitting directly on the Server.
If you want to configure VAS and VMS servers, let us know what configuration settings have been done.
Regards,
Atul

Policytool give me error Could not find Policy File ....\.java.pol

hi master
error Could not find Policy File: C:\Documents and Settings\Administrator\.java.policy
Sir when I open policytool the system give me this error
And I use http://www.jensign.com/JavaScience/www/keystorereader/index.html this link
For Keystore, Policy and Security File Reader
that give me this message
------ Default Policy File and Keystore Status ------
java.home C:\PROGRA~1\Java\JRE15~1.0_1
C:\PROGRA~1\Java\JRE15~1.0_1\lib\security found.
user.home C:\Documents and Settings\Administrator
C:\Documents and Settings\Administrator\.java.policy NOT found.
C:\Documents and Settings\Administrator\.keystore NOT found.
How set user home and keystor please give me idea
thank
aamir

I know this is a relatively old post, but some people can stumble on this page when doing a search for this problem.
Anyway, I ran into this on my PC after I installed Sybase which had an older jre.
Solution:
1. Run regedit
2. Look for Java Runtime Environment
You may have to do multiple searches. Eventually you'll find one with the version number.
3. Modify the value and change it to the correct version number. (in your case, you would have changed it from 1.4 to 1.6).
This is much quicker than reinstalling Java every time installing something that uses an older version of Java hoses up the registry value.

Log4j:ERROR Could not instantiate configurator

I use
-Dlog4j.configuratorClass=mypackage.Log4jConfigurator
java option in startWeblogic command file
to read changes in log4j-config.xml.
After that I have in console.log
og4j:ERROR A "mypackage.Log4jConfigurator" object is not assignable to a "org.apache.log4j.spi.Configurator" variable.
log4j:ERROR The class "org.apache.log4j.spi.Configurator" was loaded by
log4j:ERROR [weblogic.utils.classloaders.GenericClassLoader@544b02 finder: weblogic.utils.classloaders.CodeGenClassFinder@a0e9d7 annotatio
n: consoleapp@] whereas object of type
log4j:ERROR "mypackage.Log4jConfigurator" was loaded by [sun.misc.Launcher$AppClassLoader@12498b5].
log4j:ERROR Could not instantiate configurator [mypackage.Log4jConfigurator].
Could anybody help?

Did you get a resolution? I have a similar problem with a different object, org.apache.log4j.spi.TriggeringEventEvaluator, which has been loaded by the Weblogic consoleapp. I am running in a standalone server configuration -- admin and application server are the same. Also, using exploded directories.
Is there a way to prevent the WebLogic classloader from loading its version from the consoleapp?

RV120W [IKE] ERROR: Could not find configuration for X.X.X.X

All
I setup the RV120W to allow my MAC desktops to connect in over the internet. MAC;s are running IPSecuritas or VPNTracker. Both don't work.
Setup is
Basic VPN Setup Default Values for IKE:
Gateway Policies
Client Policies
Exchange Mode:
Main
Aggressive
ID Type:
Local WAN (Internet) IP
FQDN
Local WAN (Internet) ID:
Local WAN (Internet) IP
remote.com
Remote WAN (Internet) ID:
Remote WAN (Internet) IP
local.com
Encryption Algorithm:
3DES
3DES
Authentication Algorithm:
SHA-1
SHA-1
Authentication Method:
Pre-Shared Key
Pre-Shared Key
Key-Group:
DH-Group 2 (1024 Bit)
DH-Group 2 (1024 Bit)
Lifetime:
8 Hours
8 Hours
Basic VPN Setup Default Values for VPN:
Encryption Algorithm:
3DES
Authentication Algorithm:
SHA-1
Lifetime:
1 Hours
PFS Key Group:
DH-Group 2 (1024 Bit)
NETBIOS:
Enabled (Gateway Policies)
Disabled (Client Policies)
When my clients try and login. All I see in the logs is
011-11-28 10:05:43: [rv120w][IKE] ERROR: Could not find configuration for 212.183.140.51[65212]

The error that you are getting that shows in the log file by the "pings being blocked" it refers to the connection being block by the firewall or security on your computer.
Things that you should look for is: What type of internet security software you are using will a lot of the time block QVPN from working.
With Windows 7 it has a lot of added security so the windows 7 Firewall has to be on because soon as the firewall is turn off or another firewall is loaded that turns off Win7 firewall, the Win7 OS turns off IPSEC and that is needed for quick VPN to work. Hope this has been helpful and gave you some more understanding.

Error 2048 not a movie file

QT 7 pro was working fine at first.Now when I try to play a video file I get "error 2048 not a movie file. The file plays fine in another player. Also QT will play a QT movie but not a file. I have QT installed on two computers with the exact same problem on both. please help.

Yes the format of the files is windows media video files. They play successfully on real player and on VLC media player.
They were also playing on itunes,but now they won't play on QT or itunes. By play a movie I mean the movie was downloaded as a QT movie. The desktop icon says QTmovie. The files That give the 2048 error have real player on the desktop icon.I have uninstalled and reinstalled, even disabling norton before reinstalling still error 2048 on QT. P.S. Itunes and QT were downloaded as a bundle, whatever the problem is is affecting itunes because now when i add files to library they don't show up.

I could not transfer photos from iphone to macbook through iphoto. It is giving an error " could not be imported, file is in unrecognized format"

I could not transfer photos from iphone to macbook through iphoto. It is giving an error " could not be imported, file is in unrecognized format"

Did you look in iTunes?

ERROR:Could not read archive file - during Processing Base System Part 2

Hi there,
What I have:
* I have problem with installation of the Mac OS X Panther v10.3 on iMac.
* I have 3 original CDs (black with silver X).
What I did:
* I made new 1 partition and formated disk as Mac OS Extended (Journaled) over the Disk Utility in the first CD as normal without additional options (if I tried to format disk with zero all data and 8 way random write format after 3 days computer freeze)
* I verified disk over this utility - that was ok - HFS volume verifed.
* Then I restarted the computer and ran installation from this first CD
What happened:
* installation did not finish, because there were some problems during installation process.
* i tried to customize installation just for essential work (without other languages support, printers etc), but it was still the same problem
Installation log:
After I choosed installation type, there was first error, but it did not look like important.. - root: bootstraplookup(): unknown error code
Checking your installation disk - OK
Preparing disk - OK
Preparing base 1 and 2 - OK
Other preparing.. - OK
Processing Base System Part 1 - OK
Processing Base System Part 2
==
ERROR:Could not read archive file. - pax: Invalid header, starting valid header search.
ERROR:Could not read archive file. - pax: Invalid header, starting valid header search.
last message repeated 2 times
ERROR:Could not write file. - pax: WARNING! These patterns were not matched:
Some files for Essentials may not have been writen correctly.
root: Installer[108] Exception raised during posting of notification. Ignored. exception: Some files for Essentials may not have been written correctly. (code 1)
Install Failed
Error detected
Name: NSGenericException
Reason: Some files for Essentials may not nave been written correctly. (code 1)
==
It seems like a problem with reading some data from the CD, but during the installation checking of disk was ok.. maybe it can be problem with the cd-rom..? Or problem with data on cd-rom - I mean bad archive file..? But it is original CD.. What do you think??
Thank you!

Tomas,
On THIS Page, locate your iMac model.
From the Documents column, click on the appropriate number link.
Using the info in the document that opens, locate the serial number of your iMac.
On THIS Page, in the text field for Search Tech Specs, enter that serial number.
Click on the model of iMac that appears.
Post a link to the page that opens, or post the info requested below.
Exactly which model iMac is it?
What is the Processor speed?
What size is the Hard Drive?
How much Memory is installed?
What type of internal Optical Drive does it have?
Which version of OS, was the original Installed Software?
ali b

Error: Could not find the file "flash.ocx"

I have been receiving the error COULD NOT FIND THE FILE
"FLASH.OCX" for the past couple of months - I have been watching
the message boards and have seen a lot of "fixes" and beta's come
up errors (not sure that it's this exact error though).
I get this error continuously throughout the day - no matter
if I have nothing running on my computer or I have 10 things open.
This morning it occurred to me that my screen saver is not coming
on and it seems to me that the above errror is popping up everytime
my screen saver should start. I HAVE TIMED THIS TODAY AND CHANGED
HOW LONG BEFORE MY SCREEN SAVER STARTS - AND IT IS DEFINITELY
GETTING THE ERROR EVERYTIME THE SCREEN SAVER IS TRYING TO START.
Last week, I deleted the version of Flash that I had and then
re-installed; still getting the error.
I was getting the error when I had IE6 so I thought maybe
switching to IE7 would correct it - but it didn't (that was a few
weeks ago).
My computer does not freeze up but it is SOOO annoying to
continually throughout the day get this error.
IE7.0
ADOBE 9,0,28,0
WINDOWS XP - SP2
PLEASE HELP!

Ah-ah! The workaround is to map my network folder to a drive, say... M:\
So, when I select Edit->Edit in Audition->Sequence, I can select the Browse button to alter the Path destination. Instead of seeing '\\Zeus\Projects\...', I select the mapped M: drive so the path reads 'M:\Projects\...' instead.
Then, Audition loads and is able to find the sequence or clip.
So... that solves my problem!

Why do I get error 'Could not create temporary file. No space left on device" when I use the Engine Installation Wizard in TestStand?

The process gets to the NIVISA\SETUP.INI step, then I get this error.
I've tried with installing the MDAC and not, and it happens both times.
The drive I'm trying to create the file to has 7.4GB open on it, so I'm not sure why this is happening.
Thank you,
Dave Neumann

Dave,
This is documented in the KnowledBase 2D6A63VW titled: "Error: Could Not Create Temporary File, No Space Left on Device".
As RByrd suggested, you might need to free up some memory space in your System Temp directory, OR you may change the location of your System Temp directory to one with more space (such as the directory where you want the TestStand Engine files to be saved). The Knowledbase shows how to do this step by step. This is its URL:
http://digital.ni.com/public.nsf/3efedde4322fef19862567740067f3cc/46f99e55650d8d5b86256ac00059018e?OpenDocument
Regards,
Carlos Leon

Gerring Error -"Could not open command file"

Hi All,
I'm using Business Object Data services XI 4.0 .When I executes the job it given an error -"Could not open command file "
so if anyone know the solution then please let me know.
Thanks
Rajeev kumar
SAP-BODI Developer

The -compat=4 (and the default -compat=5) compilation modes are not related to the compiler version. All compiler versions from 5.0 (1998) through 5.10 (2009) have these options. The C++ Migration Guide
[http://docs.sun.com/app/docs/doc/819-5266]
explains the differences in detail between -compat=4 and -compat=5, with examples of how to make old code compatible with standard C++.
There is no compiler version 7. Perhaps you are thinking of the Sun Studio release. There is a Sun Studio 7 (containing C++ 5.4), but it is End Of Life, no longer available for purchase, and is not supported on Solaris 10. The recent releases are these:
Sun Studio 11, C++ 5.8, supports Solaris 8, 9, 10
Sun Studio 12, C++ 5.9, supports Solaris 9, 10, Open Solaris, Linux
Sun Studio 12 update 1, C++ 5.10, supports Solaris 10, Open Solaris, Linux
(Sun Studio 12 update 1 should be released next week. Watch this forum for an announcement.)
Please run the command
CC -V
to find out your compiler version.
When compiling on Solaris, 32-bit compilation is the default. You don't get 64-bit compilation unless you ask for it, via the -xarch option on older compilers, or the -m64 option on current compilers.

Photoshop cse 5 error "Could not open scratch file because disk is not available" using Maverick

I am getting the following error:
"Could not open scratch file because disk is not available"
I am using Adobe Photoshop CS5 on the Mac Operating System "Maverick". The application is currently loaded on an external bootable drive. I created an external bootable drive using "Disk Utilities". I've changed the directory /private/ to 777 using the following command "chmod -R 777 /private/". I have created the external bootable drive in the event that my current internal drive crashes. I would just then have to swap the drives out. I created the external bootable drive using DYNEX SATA Hard drive enclosure.
Photoshop General Discussion

I searched around and found the answer. My question was to specific. Jim Olvera had the same problem and this was the solution with the help of Adobe Support.
OS X Mavericks. I was able to resolve it after a chat discussion with Adobe support. It is indeed a permissions issue apparently, but not one that can be resolved with Disk Utility. I was able to change to another scratch disk by holding down "Command + Option" as I launched Photoshop, and that did it. Still can't use the previous disk as a scratch, though, even though permissions have been repaired.
JO
Thank you for your suggestion, but I could not even get to the point where "Photoshop" would even open up.
Thank you everyone!

Dynadock V10 - " error can not find installation file" INSTALL ERROR

Hi I have a toshiba dynadock V10.
Every time i try to install the drivers it says " error can not find installation file". I have downloaded the latest drivers and switched off my anti virus and shut off all running proiceses and no go. There are a few references to this on the internet but none has a solution.
I amn trying to install it on an equium U400 running windows 7.
Funnily enough it loaded on an old dell pc easily!
I have spent hours searching the net and there is no answer. I dont have anything showing in programs to uninstall.
Thanks

>Funnily enough it loaded on an old pc easily!
Hi
This means that drivers are ok and there must be something wrong with the system preinstalled on Equium U400.
How did you proceed?
Its important that you would NOT connect the Dynadock to the notebook before the drivers and software installation has not been finished.
Therefore you have to install the software firstly. Then after new reboot connect the Dynadock to the notebook and the installation would finish the next steps.

Error: Could not load login file

Since upgrading from Panther to Tiger (10.4.4) I have these error messages and windows that come up when I boot up my computer. They appear in the following order:
Error: Could not load login file
Looking up 192.168.0.2
The application diagnostics quit unexpectedly
Connection failed - The server may not exist...etc
Internet still works OK, btw. but the IP address of my connection is 192.168.0.4, not the address it's trying to look up.
Do I have a setting somewhere which is programmed to look up an old IP address? - ie 192.168.0.2

Problem solved
I ran the uninstaller for the old Speedtouch USB modem's drivers. (Now use a Netgear wireless router).
The uninstaller was in Applications/Speedtouch etc

Error "JRE not in Configuration File"

Similar Messages

Maybe you are looking for