Error: jspx file is too large

its size is 169KB , when compiling it ,JDev reports the following error:
Error: code segment of method _jspService(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse) too large
JDev is 10.1.3.2.0.4066
thx ,best regards

See the end of this thread:
Error: code segment of method _jspService(..) too large

Similar Messages

MP3 file size too large ?

Hi all,
I purchased the C3 to replace my older 6300 a couple of days ago.
It seems that my C3 problem discussed in another topic is almost similar.
I placed a 1Gb memory card and works just fine. I can approach and play all MP3 files on it.
But the option to use an MP3 as a ringtone is greyed out.
Tried to get it to work through personalizing profiles gives me the error message : file size too large ! Everty time and no matter which MP3 I choose. The file size is 4.3 Mb.
I tried editing the file, downsizing it to 770 Kb, but same error message occurs : too large.
Any other suggestions before I decide to bring this phone back ?
Solved!
Go to Solution.

updates vary by region and product code and if your handset is branded you may have to wait a bit longer as the network has to aproove the update
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

ERROR : OpenDoc CR to PDF - File is too large for attachment.

We are getting the following error in 3.1 using an OpenDoc call when we call a large Crystal Report to PDF format...
Error : 52cf6f8f4bbb6d3.pdf File is too large for attachment.
It runs OK from BOE when given parameters that returned 44 pages. (PDF = 139 KB)
We get the error on a parameter-set that returns 174 pages when run via CR Desktop or as a SCHEDULED Instance. (PDF = 446 KB).
Client application can't use the SDKs to SCHEDULE Instances - only configured for OpenDoc calls.....
The BOE server is running on SOLARIS - and it's is a 2 Server CMS-Cluster.
The problem is SPORADIC, so I am thinking the issue is related to a specific setting on one of the servers.
Any thoughts on where to start looking...?

Problem is _not _with the number of Rows returned - it is an issue with the size of the PDF file that it is trying to move.
Found a possible WINDOWS solution on BOB - need to find if there is an equivalent for SOLARIS...
Check the dsws.properties on web server D:\Program Files\Business Objects\Tomcat55\webapps\dswsbobje\WEB-INF\classes
See if you can change any parameter to remove size limitation.
#Security measure to limit total upload file size
maximumUploadFileSize = 10485760

Error: f14627469cba51.pdf file is too large for attachment

Hi,
Recently we migrated lot of crystal reports from BO XI R2 environment to BO 3.1 SP2 FP 2.5 environment, these crystal reports are integrated with the application.
Input parameters are given through the application using the Open Document URL and the report will open through the infoview.
This particular error arises when we try to open the report as PDF using Open Document URL,
Please find the URL below
http://bodev.com/OpenDocument/opendoc/openDocument.jsp?sIDType=CUID&iDocID=AUwcueYTQwtLhWDlil29Nvc&sOutputFormat=P&lsS@INVOICEDATE=1/31/2010&lsS@REFSERVICEID=1&lsS@BILLINGCYCLE=1&lsS@INVPREFIX=SC1001&lsS@GUID=99b18bcb-9470-4a49-948d-73961c149f5e
But we are getting the following error
"f14627469cba51.pdf file is too large for attachment"
Please help me out to resolve the issue.
Thank You,
Palani Kumar
+91-9840865865

Hi Jeff,
Did you figure out the solution to this problem?
I also getting the same problem while refreshing crystal report from 3rd party tool using dswsbobje service session
"Failed to retrieve binary view of the report. 14546ada1c151418.pdf File is too large for attachment. (WRE 02527)"
Please let me know if you find any solution.

File is too large for attachment - BO Integration Error

I developed Crystal reports (using Universe)in CR XIR2 and deployed in BO XIR 2 Repository.
Reports database is -DB2.
I am able to preview the reports in CMC/Infoview.
But when we are integrating our Application(Called GBS) to BO ,and when I am trying to open CR reprots from BO repository,it is throwing error " File is too large for attachment " .
The report is not too big even ,it is having only 100 records.
I am not sure why it is throwing this error?Did anyone faced the same error ever?
Please let me know any resolution for this,as it is blockign for me.
is it something related to the application (GBS) or any Pagerserver/Cacheserver issue ?
Will wait for any response.
Nitin

Has this ever been resolved? We are having a similar issue.
Thanks!

I get an error message saying the file is too large. It is smaller than 1GB.

I am trying to open a Keynote presentation on the icloud and I get an error message saying the file is too large. It is 56.76MB so it should open right?

Hi jltaylor6,
Welcome to the Support Communities! What is the size of your available iCloud storage? It sounds like this may be the issue in opening the document?
Size limits of iWork for iCloud beta documents - Apple Support
http://support.apple.com/en-us/HT202900
All iWork for iCloud beta apps
Up to 100 people can edit a document at the same time. Each document can be up to 1 GB. These documents use your iCloud storage, so the size of all your files on iCloud.com can’t be more than your total storage limit.
Manage your iCloud storage - Apple Support
http://support.apple.com/en-us/ht4847
I hope this information helps ....
- Judy

ReportExportControl -- File is too large for attachment

Hi all,
Back with a exception again.
Few reports deployed on BOXIR2 SP4 comes with an error as following
com.crystaldecisions.report.web.viewer.ReportExportControl
15bf5ea9377e1c1.rtf File is too large for attachment.
Few reports take date range as input and generates result based on that. When date range is small report is generated without any problem. If is large and has large set of records(approx above 10K records) then comes up with the above error.
Another set of reports whatever be the case throws this error.
But when the parameters are set in CMS console and run in console report is generated without any problem what ever be the date range.
After searching a lot no solutions in hand!!
Please suggest solutions/possible scenarios / checklist to solve this issue.
Thanks & Regards
lnarayanan

It turns out the report was so large it was basically overloading everything (disk space, cache sizes, timeouts, etc.) ... Here's the solution from the case:
1) For page server and cache server
Make sure location of Temp Files/Cache files has enough free space (more than 500 MB)
2) For page server and cache server
Minutes Before an Idle Connection is Closed = 90
3) For page server
Minutes Before an Idle Report Job is Closed = 90
4) For cache server
Maximum Simultaneous Processing Threads = automatic
5) In the command line of page server and cache server, add
"-requestTimeout 5400000" [without " "]
6) Maximum Cache Size Allowed (KBytes) = set it to an appropriate value (for e.g. for 500 Mb, value should be 500*1024 = 512000)
(This setting limits the amount of hard disk space used to store cached pages. If we need to handle large reports, a large cache size is needed. Maximum allowed is 2048 GB)
After all this, an "Error 500 - Java heap space" happened. The amount of memory allocated to a JVM application can be set using the options -Xms (the initial size) and -Xmx (the maximum size).
Regards,
Bryan

Time Machine Error - The backup is too large for the backup disk

I have been using Lion (currently 10.7.1) on my MacBook Pro (13" - early 2011) since it was released. I haven't had any serious problems with it.
All of a sudden, I am getting an error in Time Machine. When it tries to run a backup, the error "This backup is too large for the backup disk. The backup requires 7.51 GB but only 630.1 GB are available." What gives? That's plenty of room. I have installed Logic Studio and a few plug-ins, so the 7.51 GB is probably right. The free space is correct as well. I can't understand what the problem is.
The backup disk is an external USB 2.0 drive with no other Time Machine backups on it or any other files. The folder "Backups.backupdb" is the only thing on the root of the disk.
I am reluctant to reset the Time Machine and lose all of the backups, but I will if anyone recommends it.

Hi Linc,
It is not working at the moment, as I have restored the original Lion image again; it has all my work and apps on it.
Many thanks for the info on the log, though. It tells a strange story. Here's the log from the last backup that worked to the first one that failed: --
Sep 12 17:15:55 Johns-MacBook-Pro com.apple.backupd[674]: Starting standard backup
Sep 12 17:15:55 Johns-MacBook-Pro com.apple.backupd[674]: Backing up to: /Volumes/Backup/Backups.backupdb
Sep 12 17:15:55 Johns-MacBook-Pro com.apple.backupd[674]: 100.0 MB required (including padding), 633.72 GB available
Sep 12 17:15:55 Johns-MacBook-Pro com.apple.backupd[674]: Waiting for index to be ready (100)
Sep 12 17:16:00 Johns-MacBook-Pro com.apple.backupd[674]: Copied 793 files (601 KB) from volume System.
Sep 12 17:16:00 Johns-MacBook-Pro com.apple.backupd[674]: 100.0 MB required (including padding), 633.72 GB available
Sep 12 17:16:01 Johns-MacBook-Pro com.apple.backupd[674]: Copied 89 files (93 bytes) from volume System.
Sep 12 17:16:01 Johns-MacBook-Pro mds[34]: (Error) Volume: Could not find requested backup type:2 for volume
Sep 12 17:16:01 Johns-MacBook-Pro com.apple.backupd[674]: Starting post-backup thinning
Sep 12 17:16:01 Johns-MacBook-Pro com.apple.backupd[674]: Deleted /Volumes/Backup/Backups.backupdb/John’s MacBook Pro/2011-09-11-154229 (1.1 MB)
Sep 12 17:16:01 Johns-MacBook-Pro com.apple.backupd[674]: Post-back up thinning complete: 1 expired backups removed
Sep 12 17:16:01 Johns-MacBook-Pro com.apple.backupd[674]: Backup completed successfully.
Sep 13 10:34:12 Johns-MacBook-Pro com.apple.backupd[287]: Starting standard backup
Sep 13 10:34:12 Johns-MacBook-Pro com.apple.backupd[287]: Backing up to: /Volumes/Backup/Backups.backupdb
Sep 13 10:34:52 Johns-MacBook-Pro com.apple.backupd[287]: 7.51 GB required (including padding), 630.11 GB available
Sep 13 10:34:52 Johns-MacBook-Pro com.apple.backupd[287]: No expired backups exist - deleting oldest backups to make room
Sep 13 10:34:52 Johns-MacBook-Pro mds[32]: (Error) Volume: Could not find requested backup type:2 for volume
Sep 13 10:35:03 Johns-MacBook-Pro com.apple.backupd[287]: Backup failed with error: Not enough available disk space on the target volume.
I don't understand. For starters, I think it's a little wasteful that 3.5 GB has been used to back up 601 KB. That's the difference in free space on the backup volume between the two backups. That can't be normal, surely.
The only error is that mds[32] error, and from what I've read on forums, that seems to appear on backups that work perfectly.
Too weird. It looks like I'll have to reinstall Lion and all my applications again to get Time Machine working, or find another backup solution.

Conditional format with large data fails and show error as "Selection is too large" in Excel 2007

I am facing a issue in paste special operation using conditional formats for large data in Excel 2007
I have uploaded a file at below given location.
http://sdrv.ms/1fYC9qE
The file contains two sheets, Sheet "Data" contains the data on which formats are to be applied and sheet "FormatTables" contains the format tables which contains conditional formating.
There are two table in "FormatTables" sheet. Both have some conditional formats applied on it.
Case 1:
1. Select the table range of Table1 i.e $A$2:$AV$2
2. Copy it
3. Goto Sheet "Data"
4. Select data area i.e $A$1:$AV$20664
5. Perform a paste special operation on full range and select "Formats" option while performing paste special.
Result:
It throws error as "Selection is too large"
Case 2:
1. Select the table range of Table2 i.e $A$5:$AV$5
2. Copy it
3. Goto Sheet "Data"
4. Select data area i.e $A$1:$AV$20664
5. Perform a paste special operation on full range and select "Formats" option while performing paste special.
Result:
Formats get applied successfully.
Both are the same format tables with same no of column and applied to same data range($A$1:$AV$20664) where one of the case works and another fails.
The only diffrence is Table1 has appliesTo range($A$2:$T$2) as partial of total table range($A$2:$AV$2) whereas the Table2 has appliesTo range($A$5:$AV$5) same as of its total table range($A$5:$AV$5)
NOTE : This issue is only in Excel 2007

Excel 2007 No Supporting formating to take a formatting form another if source table has more then 16000 rows and if you want to do that in more then it then you have ot inset 1 more row in your format table to have 3 rows
like: A1:AV3
then try to copy that formating and apply
Solution Case 1:
1.Select the table range of Table1 i.e AV21 and drage it down to one row down
2. Select the table range of Table1 i.e $A$2:$AV$3
3. Copy it
4. Goto Sheet "Data"
5. Select data area i.e $A$1:$AV$20664
6. Perform a paste special operation on full range and select "Formats" option while performing paste special

"This text file is too large to edit" for a very small file

Hi all,
I uploaded a small JS script file, less than 2K, into the Shared Components/Static Files. When I was trying to edit it, I got the error "this text file is too large to edit".
Anybody experiences this ? Any solutions ?
My Apex version is 4.2.2.00.11.
Thanks,
Vu

Interesting. I have an SQL file that is about 4K. I copy this file to two files, one with extension .CSS and one JS then upload these three files into the Shared Components/Static Files. I can then edit the SQL and CSS, but I cannot edit the JS file.
I guess this has something to do with the extension ?
Thanks,
Vu

Replicat error: ORA-12899: value too large for column ...

Hi,
In our system Source and Target are on the same physical server and in the same Oracle instance. Just different schemes.
Tables on the target were created as 'create table ... as select * from ... source_table', so they have a similar structure. Table names are also similar.
I started replicat, it worked fine for several hours, but when I inserted Chinese symbols into the source table I got an error:
WARNING OGG-00869 Oracle GoldenGate Delivery for Oracle, OGGEX1.prm: OCI Error ORA-12899: value too large for column "MY_TARGET_SCHEMA"."TABLE1"."*FIRSTNAME*" (actual: 93, maximum: 40) (status = 12899), SQL <INSERT INTO "MY_TARGET_SCHEMA"."TABLE1" ("USERID","USERNAME","FIRSTNAME","LASTNAME",....>.
FIRSTNAME is Varchar2(40 char) field.
I suppose the problem probably is our database is running with NLS_LENGTH_SEMANTICS='CHAR'
I've double checked tables structure on the target - it's identical with the source.
I also tried to manually insert this record into the target table using 'insert into ... select * from ... ' statement - it works. The problem seems to be in the replicat.
How to fix this error?
Thanks in advance!
Oracle GoldenGate version: 11.1.1.1
Oracle Database version: 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
NLS_LANG: AMERICAN_AMERICA.AL32UTF8
NLS_LENGTH_SEMANTICS='CHAR'
Edited by: DeniK on Jun 20, 2012 11:49 PM
Edited by: DeniK on Jun 23, 2012 12:05 PM
Edited by: DeniK on Jun 25, 2012 1:55 PM

I've created the definition files and compared them. They are absolutely identical, apart from source and target schema names:
Source definition file:
Definition for table MY_SOURCE_SCHEMA.TABLE1
Record length: 1632
Syskey: 0
Columns: 30
USERID 134 11 0 0 0 1 0 8 8 8 0 0 0 0 1 0 1 3
USERNAME 64 80 12 0 0 1 0 80 80 0 0 0 0 0 1 0 0 0
FIRSTNAME 64 160 98 0 0 1 0 160 160 0 0 0 0 0 1 0 0 0
LASTNAME 64 160 264 0 0 1 0 160 160 0 0 0 0 0 1 0 0 0
PASSWORD 64 160 430 0 0 1 0 160 160 0 0 0 0 0 1 0 0 0
TITLE 64 160 596 0 0 1 0 160 160 0 0 0 0 0 1 0 0 0
Target definition file:
Definition for table MY_TAEGET_SCHEMA.TABLE1
Record length: 1632
Syskey: 0
Columns: 30
USERID 134 11 0 0 0 1 0 8 8 8 0 0 0 0 1 0 1 3
USERNAME 64 80 12 0 0 1 0 80 80 0 0 0 0 0 1 0 0 0
FIRSTNAME 64 160 98 0 0 1 0 160 160 0 0 0 0 0 1 0 0 0
LASTNAME 64 160 264 0 0 1 0 160 160 0 0 0 0 0 1 0 0 0
PASSWORD 64 160 430 0 0 1 0 160 160 0 0 0 0 0 1 0 0 0
TITLE 64 160 596 0 0 1 0 160 160 0 0 0 0 0 1 0 0 0
Edited by: DeniK on Jun 25, 2012 1:56 PM
Edited by: DeniK on Jun 25, 2012 1:57 PM

File_To_RT data truncation ODI error ORA-12899: value too large for colum

Hi,
Could you please provide me some idea so that I can truncate the source data grater than max length before inserting into target table.
Prtoblem details:-
For my scenario read data from source .txt file and insert the data into target table.suppose source file data length exceeds max col length of the target table.Then How will I truncate the data so that data migration will be successful and also can avoid the ODI error " ORA-12899: value too large for column".
Thanks
Anindya

Bhabani wrote:
In which step you are getting this error ? If its loading step then try increasing the length for that column from datastore and use substr in the mapping expression.Hi Bhabani,
You are right.It is for Loading SrcSet0 Load data.I have increased the column length for target table data store
and then apply the substring function but it results the same.
If you wanted to say to increase the length for source file data store then please tell me which length ?Physical length or
logical length?
Thanks
Anindya

Time Machine Error This backup is too large for the backup disk

Hi, I have a 1TB Time Capsule which backs up my Mac. I was having some issues with my mac so I decided to perform an erase and install and then use Migration Assistant to transfer everything back to my Mac.
After I reinstalled Snow Leopard and restored my Mac using Migration Assistant, Time Machine says that the backup has failed. It says " Time Machine Error This backup is too large for the backup disk. The Backup requires 663 GB but only 255 GB are available.
What do I do? Is my only option to erase my Time Capsule and have it back everything up from scratch?

Hi, thanks for the help. I erased everything off of the Time Capsule and it's backing up my Mac from scratch. It's almost finished backing up my whole mac. It's now at 641.86gb of 646.54gb but it's now backing up very slowly. It's backing up .1 every few minutes. Is this normal?
Here's the log from Time Machine Buddy:
Starting standard backup
Attempting to mount network destination using URL: afp://Stuart%[email protected]/Time%20Capsule
Mounted network destination using URL: afp://Stuart%[email protected]/Time%20Capsule
Creating disk image /Volumes/Time Capsule/StuartsMacPro.sparsebundle
QUICKCHECK ONLY; FILESYSTEM CLEAN
Disk image /Volumes/Time Capsule/StuartsMacPro.sparsebundle mounted at: /Volumes/Time Machine Backups
Backing up to: /Volumes/Time Machine Backups/Backups.backupdb
Ownership is disabled on the backup destination volume. Enabling.
Detected system migration from: /Volumes/My Book
Backup content size: 850.0 GB excluded items size: 606.5 GB for volume Stuart's Drive
Backup content size: 425.9 GB excluded items size: 67.3 GB for volume Macintosh HD
No pre-backup thinning needed: 722.56 GB requested (including padding), 928.68 GB available
Waiting for index to be ready (101)
Copied 28.3 GB of 602.1 GB, 29340 of 1478089 items
Copied 55.0 GB of 602.1 GB, 41596 of 1478089 items
Copied 82.9 GB of 602.1 GB, 55899 of 1478089 items
Copied 110.7 GB of 602.1 GB, 63347 of 1478089 items
Copied 138.8 GB of 602.1 GB, 83831 of 1478089 items
Copied 166.8 GB of 602.1 GB, 94574 of 1478089 items
Copied 194.7 GB of 602.1 GB, 102854 of 1478089 items
Copied 222.8 GB of 602.1 GB, 114388 of 1478089 items
Copied 129159 files (242.5 GB) from volume Stuart's Drive.
Copied 248.4 GB of 602.1 GB, 130414 of 1478089 items
Copied 265.5 GB of 602.1 GB, 355699 of 1478089 items
Copied 293.6 GB of 602.1 GB, 382912 of 1478089 items
Copied 322.1 GB of 602.1 GB, 387974 of 1478089 items
Copied 349.8 GB of 602.1 GB, 399204 of 1478089 items
Copied 378.3 GB of 602.1 GB, 399358 of 1478089 items
Copied 406.9 GB of 602.1 GB, 399441 of 1478089 items
Copied 434.5 GB of 602.1 GB, 415817 of 1478089 items
Copied 461.5 GB of 602.1 GB, 471528 of 1478089 items
Copied 488.2 GB of 602.1 GB, 537277 of 1478089 items
Copied 515.1 GB of 602.1 GB, 580446 of 1478089 items
Copied 541.3 GB of 602.1 GB, 590386 of 1478089 items
Copied 566.8 GB of 602.1 GB, 602496 of 1478089 items
Copied 593.3 GB of 602.1 GB, 649575 of 1
Message was edited by: Stuart Lawrence
Message was edited by: Stuart Lawrence

JSP file is too large to run in TOMCAT 4.1.18

When updating TOMCAT from 3.2.3 to 4.1.18, I got an error message .
After trying, I find TOMCAT 4.1.18 will crash if the .class file is too large.
(These files will run well in TOMCAT 3.2.3)
Test data:(bye adding the code "" into JSP file)
binary code is 209 KB (214,477 ��) -->ok.
binary code is 216 KB (222,079 ��) -->ok.
binary code is 224 KB (230,270 ��) -->false.
The web shows message as below. After I downsize the crash JSP.
It will run perfectly.
But I hope to keep the source "completely".
How could I do for it?
HTTP Status 500 - Internal Server Error
type Exception report
message Internal Server Error
description The server encountered an internal error (Internal Server Error) that prevented it from fulfilling this request.
exception
org.apache.jasper.JasperException: Unable to compile class for JSP
An error occurred at line: 5,688 in the jsp file: /html/customer.jsp
Generated servlet error:
[javac] Compiling 1 source file
C:\jakarta-tomcat-4.1.18\work\Tice_Adm\localhost\_\html\customer_jsp.java:8164: code too large for try statement
}catch(SQLException e){
^
An error occurred at line: -1 in the jsp file: null
Apache Tomcat/4.1.18

A Simple solution,
Modulize this JSP page. If you have 5,000+ lines of code in your jsp page, well you might want to consider moving alot of this logic into Beans and or multiple jsp pages and do jsp:includes to the other pages.
I personally recommend that you review your design and break it down into multiple Beans. There really shouldn't be too much code in your JSP pages.
Look into Struts or Web work to get a better understanding of what I am talking about.
Look into MVC designs and Model 2 designs.
I hope this helps.
-Richard Burton

Backing up issues....the file is too large

I have a computer with a CD Burner. Im trying to do a backup of my Itunes purchases and i put a blank cd-r disk in and i get the error that reads something like "the file is too large for the disk, please insert a disk that..." I have tried deselecting and deleting my video's, movies, etc from my purchased list and it still wont back up and i get the same error. I dont even
get the option to insert multiple disks as the last time i backed up it took up 7 disks. Im thinking its probably trying to backup my videos, probably and without a dvd burner its not able to...can i just get it to back up my songs only or what else can I do without deleting my videos from ITUNES all together?
Thanks!

So now that you have repeated the same thing three times that doesn't make things any clearer at all.
You are copying files from where to where?
How are you attempting to copy files, software or click and drag?
Any other detail would be helpful.
Allan

Error: jspx file is too large

Similar Messages

Maybe you are looking for