Error KE 396 during MIGO

Hi All,
I am stucked into a situation. I have received a ticket wherein the system is throwing the error message no KE396.
"Inconsistency between a document field and the profit segment number" during the MIGO.
Infact for the same P.O. earleir a GR was being done succesfully, but now for the balanced quantity GR, it is throwing this error. Just to mention, i checked and compared all the profit segment fields in P.O vis a vis, the said MIGO which doesn't give me any difference.
M not sure but the reference year in the profit segment of theP.O is of the year 2010 and the earlier GR was also in 2010. Can this be a reason for the error as this time the GR is being done in 2011.
Is there any more fields to be checked..?? Need to fix this up quiclky as the vendor awaits the payment which can only happen post MIGO.
Request you all to respond at your earliest.
Thanks & Kind regards
Sachin

Hi
THere are lots of reasons and lots of SAP notes for this error... You need to search OSS for the right note for your situation
Usually, there is one more error along with KE 396.. Can you see any other error msg??
Refer Note 321725... This also pertains to KE 396 during MIGO and there are many other notes....
Also, if you dont find suitable note, please describe your scenario in detail
br, Ajay M

Similar Messages

Error during MIGO-Error during maint. of delivery costs in master condition

Hi
We are getting error as below during MIGO against a PO with doc type NB:
"Error during maint. of delivery costs in master conditions, Delivery cost conditions in different validity periods not identical"
What might be cause??
Thanks
Maruthi

Check the delivery conditions in condition tab of PO.
Try to check if there are any delivery condition records mainatined.
I think the problem is mostly due to overlapping validity period. Try to change the validity period for the same.

Error during capturing of Excise Invoice during Migo

Dear All,
When I trying to capture the Excise Invoice during Migo , the movement I enter the vendor's Excise Invoice ,system gives me the error , *****excise no dated **** does not exist for this *** vendor for reference.
Please help , where I am lacking.
Quick Reply would be appreatiated and rewardable.
Thanks
Edited by: Chhabra Nitin on Jul 4, 2009 9:07 PM

Hello Nitin,
In your MIGO - Header Excise details tab, make sure that you have selected capture excise invoice. Now it is 'Refer excise invoice' and hence this message comes.
'Refer excise invoice 'is used when you have already captured an excise invoice and doing a goods inward referring the same invoice captured before. (Multiple GR against single EI)
Also to capture the excise invoice in MIGO, make sure that the 'capture EI at MIGO' is ticked for the excise group in SPRO - LO Gen - Tax on goods movement - India - basic Settings - define Excise groups.
Regards

Error during MIGO - Urgent

Hello all,
While doing MIGO - 101 for plant 3800 , following error arises:
Account determination for entry ICI BSX 3800 ___ 7050 not possible
Any ideas?
Regards,
Aisha Ishrat
ICI Pakistan Ltd.

Hi,
Account determination is done with a combination of Chart of accounts- valuation area-Material Type-Valuation Class- Transaction event key.
During MIGO for particular Valuation class and Transaction event Key BSX a GL account is determined.
I guess in you case for material valuation class and key BSX no GL account is maintain.
Either maintain Gl account for the combination or change the valuation class.
Hope this helps.

Make to Order 543 E is not picking during MIGO.

Dear Friends,
I am trying to perform Goods receipt against a Subconctracting PO, in a MTO scenario. The components are linked to Sales ORDER (Special Stock u2013 E). I have maintained u20190u2032 in the Individual / Coll requirements field in the MRP 4 view of the component.
So after creation of PO(Subcon), I am trying to perform MIGO u2013 without issuing components to vendor as 541/E movement type for componenets is not allowed in standard.
While performing MIGO I am getting the error no stock available with vendor, the system is trying to trigger 543/O movement type whereas I am expecting 543/E to be triggered for the components.
Can anyone sujjest if there is a way by which the MIGO should trigger 543/E during MIGO.
MM Consultant, needs help regarding
Regards,
Veeran

Hi,
So after creation of PO(Subcon), I am trying to perform MIGO u2013 without issuing components to vendor as 541/E movement type for componenets is not allowed in standard.
you are correct special stock can not issue to vendor directly
so you have to transfer this stock to own stock first through 411E movement type then issue component to vendor through 541
then receive stock by 101 O
Regards
Kailas Ugale

Excise capture during MIGO for domestic purchase

Dear Gurus,
I thank the forum members for posting lot of suggestions on the captioned subject. After referring to all of them and making
the necessary customization in ECC6 for TAXINN, I have come across some problems and request you to give your
valuable suggestions. While doing MIGO, I get a popup for Commercial Invoice No. and date and after filling them alongwith delivery challan no. etc, the excise invoice tab is not opening in the MIGO screen. However, the GR document is posted
without errors. When I try to create Excise Invoice through J1IEX, the system pops up for commercial invoice number.
For capturing excise against purchase order, the system gives the message that the commercial invoice has not been
created when I give the commercial invoice number given in MIGO. Whereas, when I give material document number for GR reference, the screen for excise opens without any excise duty values. When I try to input the values manually and press enter, the values goes off and I could not proceed.
Thanks in advance for valuable suggestions ASAP.
Sadashivan

Thanks to BUDV/Naveen/Subham for the prompt reply. I made the changes to capture and post EI in MIGO in excise group settings and removed the CVD conditions in calculation schema and now the commercial invoice pop is not coming. But during MIGO in this process, the client wants to capture the BED, AED, SED automatically. When the Excise Invoice tab opens in MIGO, it is blank although the Base amount is shown from the assessable value given in J1ID. They does not want to enter the BED,AED, SED field manually in the warehouse doing the GRN transaction. The rate has been given for condition types in FV11 which comes as taxes in Invoice tab. But the same rate is not linked in Excise invoice tab in MIGO. Can you please enlighten me where to make the relative settings for automatic calculation of BED, AED, SED, Cess based on assessable value during MIGO?
Thanks in advance.
Best Regards,
Sadashivan

Duplicate Batch number creation during MIGO wrt PO

Dear al SAP
We have activated batch management at material level and set external number range. During MIGO say for the first line item, I have entered external batch number as 123. If I give the same batch number for the second line item of the same material code, system should throw an error message.
Pls explain in detail SPRO setting required for this.

In Logistics General -> Batch Management -> Creation of New Batches -> Define Batch Creation for Goods Movements select the option "E" Manual and check against external number range

Enter chapter id for material during MIGO

Hi,
While doing MIGO for STO system is giving following error.
Enter chapter id for material during MIGO.But i have maintained chapter id and material combination in J1ID and also Excise duty
rates but when i enter excise invoice no in header only for one particular item chapter id is missing and some times chapter id is coming but AED, BED and SED (duties) are not being calculated.
Please do needful ASAP.
Thanks,
Santosh.

Hi
1) Check your chapter ID for supplying Plant It should be same as receiving plant in J1ID
2) I think at the time of outgoing excise invoice you have not maintain chapter Id for material of supplying plant ,later you maintain at time of MIGo thats why error is coming even you have maintain chapter Id in J1ID now
3) check your outgoing excise invoice document in table J_1IEXCHDR in t-code se16n
Regards
kailas Ugale

Sender Mail Adapter Error: exception caught during processing mail message;

HI , I am configuring mail to file scenario. Need to read mail content (no need to capture From,TO or Subject details) and create a file with the content in the mail.
Need to read mails from microsoft outlook. Exchange server has been configured for POP3 protocol.
Following are the details provoding in sender mail adapter:
URL: provided url in the format: pop://<server name>
Authentication method: plain
provided user credinetions to access mails.
poll interval - 1min
content encoding none.
processing parameters : quality of service-exactly once
Since there is no need to capture From,TO or Subject details, didn't select the option - use mail package.
Verified for unread mails in the mail box and made sure that there are few unread mails.
Also, created data types and other components in IR and completed mapping.
But after starting sender mail communication channel, getting error "exception caught during processing mail message; java.lang.NullPointerException" in RWB-adapter-communication channel monitoring.
please let me know what needs to be done to resolve this error.
Thanks.

HI Stefan, i tried, but still it is giving same error. Yes, i am able to access outlook mail with the user credentials given in the communication channel to access exchange server.
I am using message protocol: xipayload . Also since i dont have to capture TO,from,subject details., created data type just with one element of type string, not in the standard format .Does this makes any difference.

Error in ECC6 During installation

Dear all
Error in ECC6 During installation , the following contents is get from sapnst_dev.log
148556: if ( componentToBeCalled == 'NW_Usage_Types_Configuration_BI_ind_ind_ind_ind')
148557:
148560: if ( componentToBeCalled == 'NW_Call_Offline_CTC_ind_ind_ind_ind')
148561:
148564: }
ERROR 2008-06-27 07:43:37 [iaxxejsbas.cpp:178]
 EJS_ErrorReporter
FJS-00003 TypeError: spStringRE.exec(labelString) has no properties (in script NW_Onehost|ind|ind|ind|ind, line 63483: ???)
ERROR 2008-06-27 07:43:37
FCO-00011 The step validateContent with step key |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features_Enablement|ind|ind|ind|ind|4|0|SAP_Software_Features_GetContent|ind|ind|ind|ind|0|0|validateContent was executed with status ERROR .
TRACE
<html><head></head><body>An error occurred while processing service SAP ERP 2005 Support Release 2 > SAP Systems > Oracle > Central System > Central System Installation. You may now<ul> <li>press Retry to repeat the current step.</li> <li>press the View Log button to get more information about the error.</li> <li>stop the task and continue with it later.</li></ul>Log files are written to C:\Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS.</body></html>
TRACE [iaxxgenimp.cpp:1155]
 showDialog()
waiting for an answer from gui
INFO 2008-06-27 07:45:05 [iaxxgenimp.cpp:782]
 showDialog()
An error occured and the user decide to stop.\n Current step "|NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features_Enablement|ind|ind|ind|ind|4|0|SAP_Software_Features_GetContent|ind|ind|ind|ind|0|0|validateContent".

Up !?

Error RW:50004 during install of R12 on win 2003

Hello,
I'm trying to install EBS R12 Express install with Vision DB via edelivery.
Had some issues with MSVC and cygwin paths, but it was resolved thanks to posts on the forum.
After about 20% of the installation [about 1hr 30mins into it], I get the following error:
RW-50004: Error code received when running external process. See log file for details.
Running Database install driver for VIS instance.
I wasn't sure which log file, so I checked the one under J:\Oracle\VIS\db\tech_st\10.2.0\appsutil\log\VIS_ora-apps\<random_number_here>.log
The relevant portion from the log file is:
<snip>
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>REM Run RapidClone configuration step
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>REM
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>echo "Statusstring Configuring Database"
"Statusstring Configuring Database"
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>(echo APPS & echo APPS ) | J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz\jre\NT\1.5.0\bin\java -DCONTEXT_VALIDATED=true -mx512M -classpath .;J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz\jlib\java;J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz\jlib\xmlparserv2.jar;J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz\jlib\ojdbc14.jar;J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz\jlib\oui\OraInstaller.jar;J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz\jlib\oui\ewt3.jar;J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz\jlib\oui\share.jar;J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz\jlib\oui\srvm.jar oracle.apps.ad.clone.ApplyDatabase -e J:\oracle\VIS\db\tech_st\10.2.0\appsutil\VIS_ora-apps.xml -stage J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz -showProgress -phase cfg -nopromptmsg
Log file located at J:\oracle\VIS\db\tech_st\10.2.0\appsutil\log\VIS_ora-apps\ApplyDatabase_08300057.log
| 0% completed
<deleted many similar lines here....>
- 0% completed
\ 0% completed RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>if 1 == 0 goto :CFG_OK
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>echo "Cannot execute configure of database using RapidClone"
"Cannot execute configure of database using RapidClone"
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.
Running Database Install Driver for VIS instance
Processing DriverFile = J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz\template\adridb.drv
Running Instantiation Drivers for J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz\template\adridb.drv
instantiate file:
source : J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz\template\adrun10g.cmd
dest : J:\oracle\VIS\db\tech_st\10.2.0\temp\VIS_ora-apps\adrun10g.cmd
backup : J:\oracle\VIS\db\tech_st\10.2.0\temp\VIS_ora-apps\adrun10g.cmd to J:\oracle\VIS\db\tech_st\10.2.0\appsutil\out\VIS_ora-apps\templbac\adrun10g.cmd
instantiate file:
source : J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz\template\adrundb.cmd
dest : J:\oracle\VIS\db\tech_st\10.2.0\temp\VIS_ora-apps\adrundb.cmd
backup : J:\oracle\VIS\db\tech_st\10.2.0\temp\VIS_ora-apps\adrundb.cmd to J:\oracle\VIS\db\tech_st\10.2.0\appsutil\out\VIS_ora-apps\templbac\adrundb.cmd
Step 0 of 5
Command: J:\oracle\VIS\db\tech_st\10.2.0\temp\VIS_ora-apps\adrun10g.cmd
Processing Step 1 of 5
Step 1 of 5
Command: J:\oracle\VIS\db\tech_st\10.2.0\temp\VIS_ora-apps\adrundb.cmd
Processing Step 2 of 5
Executing: J:\oracle\VIS\db\tech_st\10.2.0\temp\VIS_ora-apps\adrundb.cmd
J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz>REM
J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz>REM $Header: adrundb.cmd 120.6 2006/12/21 19:50:11 marderiu noship $
</snip>
Any help on this would be appreciated.
Thanks.
Hammad.
Message was edited by:
user592768

Hussein,
I reinstalled MS VC++ again, couldn't delete those LEGACY_* registry entries though.
I thought I'd try install again before re-installing the OS. Here are the results:
I got the same error code again on the RapidInstall applet: RW-50004.
Looks like some sort of service isn't getting started or created.
However, looking at the J:\oracle\VIS\db\tech_st\10.2.0\appsutil\log\VIS_ora-apps\ApplyDBStack_XXX.log file it says:
<snip>
LSNRCTL for 32-bit Windows: Version 10.2.0.2.0 - Production on 02-SEP-2007 00:53:51
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROCVIS))
The command completed successfully
ECHO is off.
Listener VIS has already been started.
ECHO is off.
addlnctl.cmd exiting with status 0
OpenService failed
adsvdlsn.cmd exiting with status 1007
ERRORCODE = 1007 ERRORCODE_END
.end std out.
.end err out.
</snip>
and further....
<snip>
[CVM Error Report]
The following report lists errors encountered during CVM Phase
<filename> <return code where appropriate>
J:\oracle\VIS\db\tech_st\10.2.0\appsutil\bin\adgentns.pl 25600
No of scripts failed in CVM phase: 1
[AutoConfig Error Report]
The following report lists errors AutoConfig encountered during each
phase of its execution. Errors are grouped by directory and phase.
The report format is:
<filename> <phase> <return code where appropriate>
[SETUP PHASE]
AutoConfig could not successfully execute the following scripts:
Directory: J:\oracle\VIS\db\tech_st\10.2.0\appsutil\install\VIS_ora-apps
adsvdlsn.cmd INSTE8_SETUP 1007
AutoConfig is exiting with status 1
RC-50014: Fatal: Execution of AutoConfig was failed
Raised by oracle.apps.ad.clone.ApplyDBTechStack
</snip>
I also checked the NetServiceHandler.log file in the same dir and here is the trace:
<snip>
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : ora-apps
sDbDomain : spectrum-tech.com
sDbPort : 1531
sDbSid : VIS
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@ora-apps.spectrum-tech.com:1531:VIS
Exception occurred: java.sql.SQLException: Listener refused the connection with the following error:
ORA-12518, TNS:listener could not hand off client connection
The Connection descriptor used by the client was:
ora-apps.spectrum-tech.com:1531:VIS
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ora-apps.spectrum-tech.com)(PORT=1531))(CONNECT_DATA=(SERVICE_NAME=VIS)))
Exception occurred: java.sql.SQLException: Listener refused the connection with the following error:
ORA-12518, TNS:listener could not hand off client connection
The Connection descriptor used by the client was:
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ora-apps.spectrum-tech.com)(PORT=1531))(CONNECT_DATA=(SERVICE_NAME=VIS)))
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ora-apps.spectrum-tech.com)(PORT=1531))(CONNECT_DATA=(SERVICE_NAME=VIS.spectrum-tech.com)))
Exception occurred: java.sql.SQLException: Listener refused the connection with the following error:
ORA-12514, TNS:listener does not currently know of service requested in connect descriptor
The Connection descriptor used by the client was:
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ora-apps.spectrum-tech.com)(PORT=1531))(CONNECT_DATA=(SERVICE_NAME=VIS.spectrum-tech.com)))
Connection could not be obtained; returning null
</snip>
At the end it says:
<snip>
adgentns.pl exiting with status 25600
ERRORCODE = 25600 ERRORCODE_END
</snip>
I tried pinging my oracle machine ora-apps locally and it works, i.e. if I do ping ora-apps I get a response. I also tried pinging using the dns suffix that I setup based on your instructions and I get a response as well.
Also, I when I try pinging the ora-apps machine from another one on the network using ping ora-apps, I also get the same result.
However, if I use the entire domain name, i.e. ora-apps.spectrum-tech.com, I get a response from some server on Yahoo hosting, our ISP!!!! is that a problem?
Thanks.
Hammad.

CRM 2011+An error has occurred during report processing. (rsProcessingAborted)

Hi,
i have installed CRM 2011 on-premise version in Server A. Database and CRM 2011 Reporting Extenison in Server B. Both the server are 64 bit server and IIS 7.0 . i can able to browse the Report server url. USer as been added in Sql DB Logins and
as permission to Reportserver and ReportservertempDB.
i can able to access the CRM Reports only using Admin Credenttials that is from the credential which Report server is installed and configured
Error in server 1:
Web service request SetDataSourceCredentials to Report Server
(http://servername/Reportserver_XXXSQLSRVR)failed with SoapException. Error: An error has occurred during report processing. (rsProcessingAborted).
Error in Server 2: took this error From error log file
processing!ReportServer_0-1!7e4!03/16/2011-10:34:51:: e ERROR: Data source 'CRM': An error has occurred. Details: Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Cannot create a connection to data source 'CRM'. ---> Microsoft.Crm.Reporting.DataExtensionShim.Common.ReportExecutionException:
Caller S-1-5-21-1587242514-2812063576-513219026-1110 has insufficient privilege to run report as user 9f69b98c-c73d-e011-bd85-842b2b6567dd
processing!ReportServer_0-1!7e4!03/16/2011-10:34:51:: e ERROR: An exception has occurred in data source 'CRM'. Details: Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Cannot create a connection to data source 'CRM'. ---> Microsoft.Crm.Reporting.DataExtensionShim.Common.ReportExecutionException:
Caller S-1-5-21-1587242514-2812063576-513219026-1110 has insufficient privilege to run report as user 9f69b98c-c73d-e011-bd85-842b2b6567dd
processing!ReportServer_0-1!7e4!03/16/2011-10:34:51:: i INFO: DataPrefetch abort handler called for Report with ID=. Aborting data sources ...
processing!ReportServer_0-1!7e4!03/16/2011-10:34:51:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: An error has occurred during report processing., ;
Info: Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: An error has occurred during report processing. ---> Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Cannot create a connection to data source 'CRM'.
---> Microsoft.Crm.Reporting.DataExtensionShim.Common.ReportExecutionException: Caller S-1-5-21-1587242514-2812063576-513219026-1110 has insufficient privilege to run report as user 9f69b98c-c73d-e011-bd85-842b2b6567dd
Eventvwr error in server 2:
Failed to unload app domain DefaultDomain. The following exception occurred: Error while unloading appdomain. (Exception from HRESULT: 0x80131015).
I tried the Following ways to fix it
1.added User as content manager
2.In CRM apppool i have Admin in identity column
its really paining when i'm unable to access the CRM 2011 Default Reports. got stucked for a day.
Thanks, Saraswathy Kumaravelu

Hi All,
I encountered this same issue today after installing CRM 2011.
CRM 2011 on Server A
SQL and SSRS 2008 R2 on Server B
I found that I got the same errors described here when running the standard reports even after I had installed the Reporting Extension (CRM 2011 replacement for CRM 4.0 Data Connector). The reason I got the error was because the 'Data Source Type' had not
been updated in Report Manager.
Here's how I resolved:
1. Browse to Report Manager (http://SERVERB/Reports)
2. Open the Organisation_MSCRM folder
3. Click Show Details
4. Open the MSCRM_DataSource
5. Change the Data Source Type from Microsoft SQL Server
to Microsoft Dynamics CRM SQL
*Note: - This option is only available once Reporting Extension has been installed on SSRS Server.
6. Clear the contents of the Connection String box
7. Set the Connect Using: option to Credentials Supplied by user running the report
but do NOT check the
Use as Windows Credentials when connecting to the DataSource option.
8. Click Apply
9. Restart the SQL Reporting Services Service in
Reporting Services Configuration Manager
10. Test by running one of the Standard CRM Reports (e.g. User Summary)
Ta Da!! - Success!!
Hope this helps!

Excise amount entered wrongly during MIGO.

Dear All ,
           Our client captures and posts excise invoice during MIGO .During MIGO the person has to enter BED ,AED ,SED etc. But now while capturing Excise invoice the person didnt enter any % of excise inspite of warning and posted the MIGO .Then quality person cleared the material as well .Now they saw that mistake and now tries to capture excise invoice .
            How we will do it as the material is quality checked so we are unable to cancel the MIGO document .In J1IS it is not taking any reference of PO.
           Plz suggest any solution if any .

hi
Then better use Other Adj. option of Excise JV (J1IH) to reverse the Excise duty. Follow the below mentioned process;
Making Adjustment Postings for Other Transactions
Use: - You follow this procedure if you want to make an adjustment posting that does not fall into any of the other categories of adjustment offered by this function. You can only use an external document as your reference document.
Procedure: -
1. J1IH > Excise JV > Other adj.
2. Enter data as required, including:
u2022 Document number
Enter the number of the external document that you want to refer to.
u2022 CENVAT account selection group box
Specify which account is affected by the adjustment posting is for. If the posting does not have to be remitted immediately, select Fortnightly payment.
3. Click on u201CEnteru201D button.
The system displays the information from the material document.
4. Adjust the posting date as necessary and enter Vendor code as per requirement.
5. Enter the amount of excise duty in either of the following ways:
u2022 To enter line items for different materials and the excise duty accordingly, choose u201CDetailsu201D button and enter the line items in the table.
Here fill details like Material Code, Quantity as per Excise Invoice, Batch No, Reference (i.e. GRN Document), BED and Ed Cess Amount manually.
If you want system to propose the BED and Ed Cess Amount, Click on u201CGet Excise Invoiceu201D button and select the proper Excise Invoice from which the proportionate amount is to be copied.
Select the u201CExcise Invoiceu201D and click on u201CContinueu201D button.
It will copy BED and Ed Cess and SECess amount as per the quantity mentioned here. It will be proposed in proportion of selected Excise Invoice quantity and value.
u2022 To enter the excise duty only, choose u201CHeaderu201D button and enter the excise duty in the totals fields at the foot of the screen.
6. Specify which G/L accounts are to be posted to.
7. Save the adjustment posting.
System will post Excise JV Document; Accounting Document with Part2 Serial No has been successfully created.
regards
kunal

Excise invoice not capturing during migo?

when I tried to capture the excise invoice during Migo. I am unable to select the capture only option. it is automatically selecting "refer only excise invoice"? how to solve this problem.

Dear,
I think you have not maintain Excise data
T.code
J1ID - Excise rate maintenance
Maintain Chapter Id,
Maintain Mateial & Chapter id combination.
CENVET Determination (If material is CENVETABLE)
Vendor Excise Detail
Excise Tax Rate.
Hope above will useful.
GOPAN.

[Forum FAQ] Troubleshooting "An error has occurred during report processing" message when viewing SCCM reports

Symptom:
When you view a report with SCCM, you may encounter the following error message:
An error has occurred during report processing.
Under the details box, you can see the detailed error information as below:
System.Web.Services.Protocols.SoapException: The report server has encountered a configuration error. Logon failed for the unattended
execution account. ---> Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration error. Logon failed for the unattended execution account. ---> Microsoft.ReportingServices.Diagnostics.Utilities.LogonFailedException:
Log on failed. Ensure the user name and password are correct. ---> System.ComponentModel.Win32Exception: The user name or password is incorrect
at Microsoft.ReportingServices.Library.ReportingService2005Impl.GetReportParameters(String Report, String HistoryID, Boolean ForRendering, ParameterValue[] Values, DataSourceCredentials[] Credentials, ParameterInfoCollection& Parameters)
at Microsoft.ReportingServices.WebServer.ReportingService2005.GetReportParameters(String Report, String HistoryID, Boolean ForRendering, ParameterValue[] Values, DataSourceCredentials[] Credentials, ReportParameter[]& Parameters)
Figure 1 is the screenshot of the error message in SCCM:
Figure 1.
Cause:
According to the detailed error message, it indicates that “The report server has encountered a configuration error. Logon failed for the unattended execution account.”
and “The user name or password is incorrect”, so this issue would be caused by the mismatched credential stored in report server.
Solution:
To solve this issue, you can follow the steps below:
1.
Access Report Manager URL on your reporting server.
From figure 2, you can see that the URL for Report Manager is
http://SCCM:80/Reports
in our lab environment. You can check your Report Manager URL in Reporting Services Configuration Manager.
Figure 2.
2.
Find out the date source {5C6358F2-4BB6-4a1b-A16E-8D96795D8602} and access it.
Figure 3.
3. Test connection (Figure 4)
You can have a test connection to check whether the credentials stored in the report server are correct or not.
Figure 4.
4.
Modify the password or choose another authentication method
If you want to change the password, please make sure that password is the same as the one that you have set for that user account in the domain.
5. Confirm connection
After you change the password, you can test connection again. From figure 5, we can see that connection created successfully.
Figure 5.
After all the steps above, there is no error message when viewing the report. (Figure 6)
Figure 6.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

ok . the user name is sccm.admin this user have the assignment to run as a services, he is a domain admin, on the sql server this user have the sysadmin, i create the reporting with the Reporting Services Configuration Manager, and on the Database i use
the sccm.admin to create the new database, on the Service Account i use sccm.admin user, also this user have local administrator on the SCCM server, + i give him the dbreader on All the database on the SCCM server witch it also the SQL server, i add the sccm.admin
on the reporting web the system role and check the all settings give him full permissions
do i make my self clear ? (my English is not so bright )
now from the SCCM 2012 console , some reports run perfectly, and some run and trow this error at me
Microsoft.Reporting.WinForms.ReportServerException
An error has occurred during report processing. (rsProcessingAborted)
Stack Trace:
   at Microsoft.Reporting.WinForms.ServerReport.ServerUrlRequest(Boolean isAbortable, String url, Stream outputStream, String& mimeType, String& fileNameExtension)
   at Microsoft.Reporting.WinForms.ServerReport.InternalRender(Boolean isAbortable, String format, String deviceInfo, NameValueCollection urlAccessParameters, Stream reportStream, String& mimeType, String& fileNameExtension)
   at Microsoft.Reporting.WinForms.AsyncMainStreamRenderingOperation.RenderServerReport(ServerReport report)
   at Microsoft.Reporting.WinForms.AsyncRenderingOperation.PerformOperation()
   at Microsoft.Reporting.WinForms.ReportViewer.AsyncReportOperationWrapper.PerformOperation()
   at Microsoft.Reporting.WinForms.ProcessingThread.ProcessThreadMain(Object arg)
this poor gay have the same problem
An error has occurred during report processing. (rsProcessingAborted)

Error KE 396 during MIGO

Similar Messages

Maybe you are looking for