ERROR: Key Figure Planning

Hi All,
I’m very new to SEM-BPS, can someone help me in resolving the following issues.
I want to do Key Figure Planning for Marketing & Campaign Planning in CRM.
•     I created few planning areas with all the required elements in BW-SEM-BPS.
•     RFC destination from BW to CRM and CRM to BW is defined.
Now I’m getting following errors, in SAP CRM {SPRO>CRM >Marketing>Marketing Planning & Budgeting>Key Figure Planning >… }
•     While defining Planning Profile Group F4 Help is not working for selecting Planning Profile from SEM-BPS.
•     While doing Manage Key Figures - Function module “UPC_FW_START_RFC” not found (Message no. BL001)
While creating Marketing Plan and Key Figure Planning following errors appear.
•     Function Module “UPC_PROFILE_GET” not found (Message no. BL001)
•     Function module "API_SEMBPS_PLANSTRUCTURE_GET" not found
Can someone please provide me details how to resolve the above issues.
If anyone can mail a doc. which lists all the steps to be followed while integrating SEM-BPS & CRM and doing Key Figure Planning will be of great help.
Thanks
Vikas Sharma
[email protected]

Please see the following message:
Re: "API_SEMBPS_PLANSTRUCTURE_GET" error while doing Key Figure Planning
Regards
Marc
SAP NetWeaver RIG

Similar Messages

  • SEM "key figure planning" and "planning workbench"

    Hi All,
    I get error messages when trying to run "key figure planning" and "planning workbench"
    I've setup the rfc (Define RFC connections) and the logical systems (Define target systems):
    MKTPLBW     MKTPLBWRFC     
    MKTPLCPRO     MKTPLCPRORFC
    MKTPLMB     MKTPLMBRFC
    MKTPLR3      MKTPLR3RFC
    MKTPLSEM     MKTPLSEMRFC
    Errors:
    "key figure planning" : Exception condition "CNTL_ERROR" raised.
    "planning workbench": Access via "NULL" object reference not possible
    Any ideas?

    Hi M. Riaz Shaik
    did you solve this issue?
    How?
    Im in the exact same situation.
    Regards,
    Memo Saenz

  • Key Figure Planning in Marketing Planner ?????

    Hi All,
    We have to implement CRM Campaign Management for our Client. We have sligntly modified the standard Planning Profiles and Planning Layout in BW BPS and created a custom z-package. The RFC connection has already been setup with the BW system and is working/tested successfully. On CRM side we have created Planning Profile Group, having the required Planning Profiles which are created in BW BPS.
    Now the problem is, we are not able to see the Planning Layouts in CRM Campaign Management Key Figure Planning.
    We really dont know what went wrong, or if there is some extra setting we need to do. I searched almost all the SAP HELP, but couldnt find any procedure or doc.
    Can you experts out there help me in resolving this issue, if you have already faced similar problem it will be of great help.
    Thanks & Regards
    Vikas Sharma
    [email protected]

    hi Vikas,
    Run the report ZBPPOBPS, BW-BPS stores application-specific statistic records that you can evaluate in transactions BPS_STAT0 and BPS_STAT1.
    This tool collection provides extended functions to monitor and analyze the performance of your planning applications.
    Reward with points.
    cheers,
    Mark

  • Error in DTP load from PSA to IC - Error - Key figure 0 not allowed for

    HI ALL,
    ERROR - Key figure <> 0 not allowed for unit ' '; see long text
    Diagnosis
        The unit/currency ' Source unit MEIN ' with the value 'space' is
        assigned to the key figure ' Source Key Fig. DIFF ' with the value '
        4240.000- '.
    System Response
        A key figure that is not equal to 0 and for which no unit/currency is
        set has an inconsistent data state. The data record is not processed.
    Procedure
        Correct the source data.
    Procedure for System Administration
    Please guide
    BR
    Prasad

    Hi ,
    First af all identify all such records by creating an error DTP so that the same can be collected in Error stack .
    1. Go to the Update tab of the normal DTP and there you can find the create Error DTP option .Click on that .
    2. This will take you to the Error DTP screen .Use the option 'Valid record updated reporting possible (request green).You can increase the number of errorneous records to be avoided there only .
    3. Please make sure you have activated the option of ' Valid records update reporting possible request green ' both in the Normal and Error DTP .Also the number of errorneous records to be avoided to be mentioned in both the DTP's.
    4. Activate the DTP's (Both Normal and Error) .
    After this can you please run the Normal DTP again .You can check the Error stack to see the errorneous records .When you double click on any record in the error stack it will thrown an error message from where you can find the exact error with those records .You can rectify these records in the errror stack and then run the error DTP to update the same to the data target.
    Ideally these records should be rectified in the Source system .
    Thanks
    Kamal

  • Error message CRM_MKTPL043 in CRM_MKTPL key figures tab

    Hi all,
    In CRM_MKTPL, we choose the partner, enter the activity type, choose the sales organzation and enter the planning dates in basic data tab. Then we enter the product and then press the key figurs tab. And we take the error  CRM_MKTPL043. We can't understand the error and so don't know how to solve..Can you help?

    Hi,
    We have to implement CRM Campaign Management for our Client. We have sligntly modified the standard Planning Profiles and Planning Layout in BW BPS and created a custom z-package. The RFC connection has already been setup with the BW system and is working/tested successfully. On CRM side we have created Planning Profile Group, having the required Planning Profiles which are created in BW BPS.
    Now the problem is, we are not able to see the Planning Layouts in CRM Campaign Management Key Figure Planning.
    We really dont know what went wrong, or if there is some extra setting we need to do. I searched almost all the SAP HELP, but couldnt find any procedure or doc.
    Can you experts out there help me in resolving this issue, if you have already faced similar problem it will be of great help. Im working on CRM 4.0 (GUI)
    Thanks & Regards
    Vikas Sharma
    [email protected]

  • Error while intercative planning in SNP

    What we did is as below
    1.     created MOPS
    2.     created Planning area in DP
    3.     created time series and assigned version 000 in DP
    4.     Created Planning Book and Data view in DP
    5.     BW settings to extract data from OLTP and we have the data with planning version 000 in BW info cube
    6.     Load the history data from Info cube
    7.     Calculated proportional factors for next year
    8.     created Forecast profile.
    9.     Run forecasting after reading the history
    10.     Now forecast is ready in DP.
    11.     Released the same to SNP
    12.     When I goto SNP interactive planning and trying to load the data using 9SNP94 planning book/Data view i am getting the error - key figure not defined
    Can anyone tell me how to resolve the same?

    Dears,
    I tried all the steps given by you..but all in vain, I will explain you in detail what i ahve done..
    In /SAPAPO/MSDP_ADMIN - Administration of Demand Planning and Supply Network
    I have defined MOPS with following character(no SNP tick)
    9ALOCNO
    9AMATNR
    Defined planning area with following key figures
    SALE_HIST     Sales history
    9AREVFC     Sales Forecast
    9AMANUP     Manual Correction
    9ATOTFC     Total Forecast
    9APRICEFC     Planned Price
    T_PRICE     Price
    Storage bucket profile used is MONTH
    Created time series and it is valid up to 31.12.2009
    In BW, I have created a infosource/infocube with  9ALOCNO and 9AMATNR as character and SALE_HIST     Sales history as key figure and OCALMONTH as time character. Uploaded data from excel and now I can see the data in infocube.
    Now uploaded the data from BW to SAP-APO using - /SAPAPO/TSCUBE - Load Planning Area Version
    Calculated proportional factor using /SAPAPO/MC8V - Calculate Proportional Factors.
    In /SAPAPO/MSDP_ADMIN - Administration of Demand Planning and Supply Network, created chrematistics combination.
    Created forecast profile with UA profile
    Defined Planning book and data view
    Defined macros in /SAPAPO/ADVM u2013 MacroBuilder
    For calculating 9ATOTFC     Total Forecast = Sales Forecast 9AREVFC + Manual Correction  9AMANUP
    For calculating T_PRICE = 9ATOTFC * 9APRICEFC
    Now I goto /SAPAPO/SDP94 - Interactive Demand Planning and search for my PB
    I could see sale history filed is copied form BW.
    Run Forecast and got the forecast in 9AREVFC.
    Released the DP figures above to SNP using /SAPAPO/MC90 - Release to Supply Network Planning.
    In /SAPAPO/SNP94 - Interactive Supply Network Planning, used std planning book/DV u2013 SNP94(1).
    When I load I am getting the error as u201Cno key figure selection was foundu201D
    Any clue where i am wrong?

  • Key figures in BI

    I am not able to see the drill down option for the key figures (Plan, Sales Actual etc) in the report. What should be done to have the drill down option.

    Hi,
    In a report drill down in only possible in a case:
    Where you can have B from A.
    Then you can have C from B and B from A.
    And such kind of situation only arises in the situtation of Char.
    And Key figures are Quantity Values or Amount, which all are can be summed up and all.
    Hope this helps You.
    Regards,
    Soumyadeep.

  • Planning cube Key figure over flow error

    Hi Experts,
    I am getting the following  Key figure errors in Planning cube while running the Planning sequences.
    1.Over flow occurred when calculating KF
    KF details : Data type: DEC-Counter or amount filed  with comma and sign.
    2.ORA-01455: converting column overflows integer data type
    Data type : INT4- 4byte integer,Integer number with sign.
    The number s are growing in cube and it is giving overflow error .We are compressing the cubes once in a week.we are using these KF's in two cubes.Please help me to resolve the issue.
    Regards
    Prasad
    Edited by: PRASAD on Feb 1, 2009 9:39 AM

    Hi Prasad,
             Check here.........
    https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361706E6F7465735F6E756D6265723D3131393536373226
    https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=460652
    Thanks,
    Vijay.

  • Planning using the Non-Cumulative Key figures

    HI,
    In my reporting requirement for IP, I need to get some actual values from the cube 0IC_C03. The key figues which I required are 0VALSTCKVAL and 0TOTALSTCK, but these 2 are non-culative key figures. When I selected these 2 key figures in my aggregation level, it is throwing an error message as "InfoObject 0VALSTCKVAL(Version A) is not compounded and Aggregation level is inconsitent".
    I read in some document that, it is not possible to use non-cumulative keyfigures in ALVL.
    I searched in SDN and SERVICE also, but some documents are saying that, in new path level (19) it is possible. Now I using the path level 18 only. In this case how we have to use these non-cumulative keyfigues,, please sugguest me...
    Thanks in advance...
    Regards
    Rajesh

    Hi
    Non-cummulative keyfigures are not supported fro planning and teh error thrown is correct.Please find the help link which gives what are supported and not supported as part of aggregation levels.
    http://help.sap.com/saphelp_nw70/helpdata/EN/43/1c3c7031b70701e10000000a422035/content.htm
    Regards, Hyma

  • Divide key figures in real time cube by using planning function

    Dear all,
    I have a real time cube which contains one key figure which is defined by 10 characteristics.
    For one country, the users types the values fpr the key figure in a wrong format, so I have to divide those values by 1000.
    I have tried to do this with a planning function "Revaluating" and a filter (on this spec. country). I have combined this two element in a planning sequence. When I run this I just get the error message "planning function ended with errors" without any further information.
    Is there an other way to devide values within the cube? the BI release is 7.0.
    Any help would be great.
    Best regards,
    Stefan from Munich/Germany

    Hi Stefanos,
    What you are doing is absolutely right.. However, I want to ask a few question..
    1. Are the characterestic values included in the filter ? ie. If you want to change for Country: UK, is UK present in filter?
    2. Are there any other characteristics that you have not included in the function and are getting changed by chance ? Like you might need to include 0fiscyer in To Change if you are assigning 0Fiscper.
    3. Write a small FOX function with hardcoded values to check if the system is accepting the values or not..
    It should work.. Please write back in case you need more help..
    Regards, Rishi

  • Error in key figure value at Reporting level

    Hi Experts,
    I had problem of Key figure value which displays wrong data in reporting.
    The Process is :
    I had added the key figure SALK3 to the generic data source (xxx). The Extractor is Table/View, Table is MBEW.I had replicated to BW side.
    In BW, The process is Data Source(Generic) to 0MAT_PLANT(Infoobject (Added SALK3 to the infoobject of Attributes tab) ) loads to Multiprovider.I can see data  in the multi provider for that particular field after loading.
    Now the problem is, In Query designer i had added the key figure in Columns and ran the report.The output of the field is, If the value is 100 it displays 100 ERROR, if it 200 it displays 200 ERROR.Could you please help me on this,where i went wrong.
    Regards,
    Kishan.

    Hello,
    Please check with the follwing screen shots:
    Right click on the key fgure you created----select edit
    Once the screen opens select the NODIM from Data Functions before the key figure (as highlighted).
    Finally click on OK.
    Regards
    NS

  • Key Figure Display in Interactive Planning

    Hello,
    I am unable to display some of the key figures in  SNP Interactive Planning. All these Key Figures are present in Planning book and are also included in the data view.
    Is there any setting wherein I can control the display of Key figure although that key figure is present in Planning book and data view. For Example I have my "safety stock" key figure in my planning book and data view, but I am unable to see the "safety stock" key figure in SNP interactive planning.
    Would really appreciate your help.
    Thanks,
    Sarath.

    Hi Visu,
    Your answer is really helpful, thanks for that. But while I am trying to hide some key figures it is not allowing me to do so. It is either hiding all the key figures or unhiding all. Please let me know if why the system is behaving like this.
    Thanks

  • Key figure display in planning book with respect to Time bucket profile

    Hi,
    I am loading a key figure to planning area from the info cube for the current month. When I review the key figure in planning book with monthly time bucket profile it shows 85 for the current month. In the same planning book with weekly bucket profile, it shows 55 from the current week and future weeks and the remaining 30 goes into the past weeks of the current month.
    How to make the total quantity 85 to show in the current and future weeks only.
    thanks and regards
    Murugesan

    Hi Murugesan,
    Within the Planning Area, the data is stored at the lowest level granularity that you maintain in storage bucket profile. Then during display, system will decide what data to show depending on what kind of time bucket profile you use in the planning view, and the time based disaggregation that you maintain for Key Figure.
    In this below case, what time characteristic do you have in cube? Is it date, week or month?
    If it's date, check how much KF data is maintained on the dates which belong to week which has days both in this month/last month e.g. if I talk about Dec 2011, how much data is stored 1,2,3 & 4 th of Dec, 2011.
    This data would appear in Dec in monthly view, but in week, it would appear in the week starting 28th November.
    If data is maintained in cube in weeks, then you need to calculate how time based disaggregation would show it to you in months.
    If it's months, then you would need to find out how much data would go to the days in the past week of the month.
    The time based disaggregation may be causing you some issues, but in that case, I would not expect 30 out of 85 to go in the past week, unless you have data in cube in days.
    Data shown in weekly view for week starting 28th Nov should ideally be a small proportion of 85, unless you are using a time stream/fiscal year variant, due to which most of December is in holidays.  The only other exception I can think of is that you have data in teh days mentioned above.
    It would be best to help the business understand this disaggregation logic, rather than thinking of manipulating the data to shift to a later week.
    If this logic doesn't explain your situation, then please provide the date/week/month at which you have data in cube, and what quantity.
    Thanks - Pawan

  • Key Figure units in Fact Table - Error

    All -
    When a run a report off of a cube, some row display 0 when there are corresponding values in my cube.  The report doesn't agree with LISTCUBE.  I have ran transaction RSRV on my cube and tested the "Key figure units in fact tables of Infocube" and I get an error saying that 1380 units are missing from fact table.
    <b>Diagnosis
    In the fact table /BIC/FEU_FRCTS records have been found that contain values other than zero for key figures that have units, but that have no value for the unit of the key figure. Since the value of the unit has to correspond to the value of the key figure, this inidicates an error when the data was loaded. The values of the units have not been loaded into BW correctly. Choose Details to display the incorrect records.</b>
    Does anyone know what this error means? How do I solve this problem?
    Thanks,
    Nyrvole

    hi Nyrvole,
    as the message said, you have keyfigures with unit but the unit value not filled, click 'detail' as suggested to check which keyfigure(s) involved, that go to rsd2 type in that keyfigure and see which infoobject unit is used, then check transfer/update rules how this unit infoobject mapped, try correct the values and upload again.
    there is option 'repair' in rsrv but think in this case it can't fix the error, just try.
    hope this helps.

  • Key figure flag in the planning layout

    Hi,
    Can anyone explain the importance of the key figure flag in the planning layout?
    Regds
    Pavan.

    Hi Arun and  Zegion,
    Thank you for your responses.
    Arun, I do not have any aggregates on the cube. I changed the aggregate properties of the Key Figure from SUM to Minimum. this has solved my problem temporarily.
    the reason I am saying temporarily because this is a SAP delivered InfoObject. This is for the datasource 0CO_PC_PCP_01. When I read through the documents, it said, SUMMation for Aggregation and Last value for "Exception Aggregation" will display the value of KF as the last value and does not add them up.
    Since this wasn't the happening in my query, I changed the Aggregation from SUM to Minimum.
    Regards,
    S.P

Maybe you are looking for