Error "KSRPC.SendPacket: Timed out on Socket header" when stopping iAS

I am using iAS 6.5 on Win2k. I frequently get this error when stopping the app server:
KSRPC.SendPacket: Timed out on Socket header
Any ideas? Anything to worry about? Thanks.

I wouldn't worry about it if you only see the error when shutting down I also sometimes get the error. If you see the error when starting you could have problems as the kas would possibly not know some or all of the engines are running

Similar Messages

Trying to update my ipod but i get the error message network timed out. I've already uninstalled and reinstalled the latest version of itunes. I also do not have software update in settings on the ipod. How do i get the ipod to update?

trying to update my ipod but i get the error message network timed out. I've already uninstalled and reinstalled the latest version of itunes. I also do not have software update in settings on the ipod. How do i get the ipod to update?

Try the manual method specified here:
iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch

Upgrade to itunes 7.6 now error "network connection timed out"

Upgrade to itunes 7.6 now error "network connection timed out" when i try to connect to itunes store and podcast

I did a manual install of itunes 7.6 (it refused to install through the automatic update) and now I get the same problem - itunes store won't connect.

ACE - unable to execute various show commands. Error: Called API timed out

Hi I am runnng version A2(2.3) on a HA ACE setup.
I have noticed today that issuing various show commands such as 'show run' and 'show probe' on the active ACE have suddenly stopped working. On hitting return the ACE sits there for a while non respondant before finally outputting an Error: Called API timed out and then returning to the command prompt. It only seems to happen on show commands that would generate a lot of output, for example a 'show version' works. I have also noticed a delay sometimes in logging into the active ACE which has again only come to light today.
We havent made any changes recently and this behavior has not been seen before.
I could only find one similar posting which kind of suggested that a high logging level may be to blame for this issue, we are running at debugging level but have since the ACE's were brought into play over 12 months ago (yep i know logging at that level is far from ideal).
Production traffic does not seem to be affected at present.
Apart from reudcing the logging level I am not sure what else could be causing this issue, has anyone come across this one before?
Unfortunaltey the 'show resource usgae in one of the commands that wont work'
A 'show cpu' command shows nothing above 10%
Though multiple context are configured (3), the default resource allocation is in place between all three.
Thanks for taking the time to read.

Thanks for the response I will take a look at that Bug ID.
In the end as you have already suggested above I ended up failing across to the standby ACE and powering down/up the affected ACE module from the switch CLI. This seems to have restored all functionality. Even a soft reload command prior on the affected ACE didnt take affect.

I am trying to load a calpatch to a program called Caldera, but i keep getting the following "AppleScript Error – Terminal got an error:apple event timed out ( -1712)" my IOS is Yosemite, and i am running the latest version of the caldera program

I am trying to load a calpatch to a program called Caldera, but i keep getting the following “AppleScript Error – Terminal got an error:apple event timed out ( -1712)” my IOS is Yosemite, and i am running the latest version of the caldera program

Hi Linc, thanks for this ... it is weird, we tried this previously, but we only did a restart.
This morning our Mac was 'off' even though we hadn't turned it off, (maybe a power outage) I restarted and ran the calpatch immediately, and it worked !!
it is embarrassing, because as a service engineer, I am always telling customers to restart and even power down completely before trying again.
Thanks.
Snakeydee

I want to update my ipad2 when i used to download the os it shows error as network timed out and i repeated again and again always it shows that network timed out but the apps are downloading but large apps are't why?

i want to update my ipad2 when i used to download the os it shows error as network timed out and i repeated again and again always it shows that network timed out but the apps are downloading but large apps are't why?

Try temporarily turning off all your firewall and antivirus software until the download has completed.

What is Essbase Error (1024015) Request timed out by admin?

What is Essbase Error (1024015) Request timed out by admin?

I am getting this error trying to retrieve data in a spreadsheet connected to smart view.

HT4972 I can't get my ipad to update. It keeps telling me there was an error and internet timed out.

I can't get my ipad to update. It keeps telling me there was an error and internet timed out.

Try disabling your firewall and your anti virus software until the update downloads and installs on the iPad.

Login timed out from Socket Listener?

Does anyone have a clue on why I got the following error?
Thanks.
Mon Sep 18 18:50:42 PDT 2000:<W> <ListenThread> Connection rejected: 'Login timed out after: '5000' ms on socket: 'Socket[addr=qelab3.ariba.com/10.10.16.104,port=1298,localport=8001]''

We do not support ssl between plugins and weblogic yet. Currently if you send a https request, plugins will just downgrade them to http.
Srikant, [email protected], http://weblogic.bea.com/, etc.
Prabhu Kannan wrote:
Hi,
I am facing the same problem. I have configured NSAPI plugin in our NES server and the WebLogic 5.1. I am trying to connect to Weblogic through the SSL port. It times out. I see the following message in the NES log.
[08/Nov/2000:15:51:56] failure (16491): for host 10.203.3.78 trying to GET /weblogic/index.html, wl-proxy reports: Error reading WebLogic Response from 10.203.1.226:7021 at line 764 of proxy.cpp, errMsg='File not found'
Both the web server and weblogic have SSL certificates installed in them.
Can you give me some ideas as to how to get this to work?
Thanks,
Prabhu
Srikant Subramaniam <[email protected]> wrote:
From an earlier posting:
This sounds like a slow client to me. Specifically the client isn't sending enough data (something like 7 bytes) within the first 5 seconds for the server to determine which protocol the
client is using. I believe that future versions of the server squelch this message by default because logging errors caused by poorly behaving clients seems to cause a good deal of noise
in the logs, especially when running a public site.
the client timeout parameter can be increased, see:
http://www.weblogic.com/docs51/admindocs/properties.html#login
Srikant, [email protected], http://weblogic.bea.com/, etc.
John Xiao wrote:
Does anyone have a clue on why I got the following error?
Thanks.
Mon Sep 18 18:50:42 PDT 2000:<W> <ListenThread> Connection rejected: 'Login timed out after: '5000' ms on socket: 'Socket[addr=qelab3.ariba.com/10.10.16.104,port=1298,localport=8001]''

How to up the timeout setting to solve password reset portal error "Authentication gate timed out waiting for a challenge response"?

Hi Everyone,
We have the password portal up and running on one box and another server with FIM R2 and SharePoint 2010. All is good with the exception that our end users typically get distracted during the password registration and/or reset process and receive:
"An error has occurred. Please try again, and if the problem persists, contact your help desk or system administrator. (Error 3000) ". The timeout kicks in after 5 minutes of inactivity in the browser.
The FIM Service log shows the following:
"Authentication gate timed out waiting for a challenge response".
I have confirmed that the default password portal web.config setting is <add key="SessionTimeoutInMinutes" value="20" />.
We have also updated Microsoft.ResourceManagement.Service.exe.config per this
article to the following but with no luck:
<resourceManagementClient resourceManagementServiceBaseAddress="myAddress" timeoutInMilliseconds="600000" />
<resourceManagementService externalHostName="myHost" dataReadTimeoutInSeconds="600" dataWriteTimeoutInSeconds="600"/>
We did not update the Windows SharePoint Servicesweb.config setting per the article about since we are on SharePoint 2010.
There is no NLB or firewall in front on this server.
If anyone has any solution to how to solve this on FIM R2/SharePoint 2010 please let me know.
Cheers!

FIM_Admin,
You could try changing the receiveTimeoutInSeconds parameter of the resourceManagementService node in your Microsoft.ResourceManagement.Service.exe.config file. However, you are warned not to do this unless instructed to by MS customer support.
http://msdn.microsoft.com/en-us/library/windows/desktop/ee652424(v=vs.100).aspx
http://technet.microsoft.com/en-us/library/ff800821(v=ws.10).aspx

Upgrading to 4.2 iphone and ipad error "network connection timed out"

When trying to upgrade both ipad and iphone to 4.2 the download runs then stops with error message "network connection timed out" and says try again later. I have downloaded movies that take over an hour so I know it is not just time. I have trying turning off firewall and virus as well as empting cache and still no results. really believe it has something to do with windows 7 settings. any ideas?

I was having the same problem and after several weeks of technical support they basically gave-up and suggested I try installing Kaspersky KIS 2012 (not yet released, but available on their ftp download site as a "current version").
Anyway, I installed it and now I can update my iOS on my iPhone and iPad. Voilla! However, Kaspersky claim that this is not a common problem. Yeah, right!
If you want to upgrade to KIS v12 (2012) or KAV v12 (2012), then here is how:
1) Download v12 (2012) from the ftp site here:
ftp://ftp2.kasperskyftp.com/consumer-products/Current_Versions/KIS2012/
2) Disconnect from Internet (doh!)
3) Stop Kaspersky (right click on the "K" in the tool tray and select "Exit")
4) Uninstall Kaspersky from the Control Panel (Programs / Add-Delete Programs)
5) Reboot after uninstalling old version
6) After rebooting, install KIS/KAV v12 (2012)
7) When it prompts for install key, re-connect to the Internet and enter the key code (usually on the back of the envelope the original installation disk is in). The key code for earlier versions should work (at least it did for code with KIS 2010, two versions earlier).
8) Reboot when done
Finally, if this works for you (or anyone else), please post here, since Kaspersky seems to think it is very rare case that it worked for me... ha!

Itunes error: network connection timed out

Every time I try and log into my Itunes account I get an error message saying We could not complete your Itunes Store request. The network connection has timed out. How can I fix it?
Edit: My virus scanner is Avg and I use ad-aware 2007 for spyware. I can't find a feature with either one that would block i tunes. Also, it's an allowed application with windows firewall.
Message was edited by: touch84

Ive been having this problem for over 24 hours now. Bad bit is that I had restored my iphone just before this so ive been stuck without a mobile phone since then.
Symptoms:
Iphone appears in itunes but when the iphone tries to get onto the store to finish re-activation the connection hangs and then i get the error "we could not complete your itunes store request. the network connection timed out".
I can browse the itunes music store + podcast store and i can download podcasts.
Safari is working perfectly.
Anything anyone can suggest would be a big help. I presume it it apple's server's fault.

Error "500 Connection timed out" when starting a Web Interface

Hello,
when starting a Web Interface
(either from preview in Web Interface Builder or directly via transaction BPS_WIF0),
after around 2 minutes I get the following Error Message: "500 Connection timed out"
(in Detail, it says "Connection to partner timed out").
If I use a less complex web interface, this error does not come up.
What can I do to avoid this?
Thank you in advance,
Stephan

Hello Stephan,
if a basic web interface is fast enough, this is normally a confirmation, that the problem does not depend on network performance. We do this test always as an initial test to exclude network issues before we analyze BPS.
So it looks like you do have BPS performance issues. What I can tell you is that multiple variable selectors decrease performance. If this is not you problem I would recommend to check how-to-paper "performance".
It could be related to HTTP-services as well, you will find SAP notes about this topics in OSS.
regards
Eckhard Lewin

Sapgui error service sapdp00 timed out

Hi,
I am getting Sapgui error " connection to host ....,service sapdp00 timed out" when connecting to a remote sap system over internet. Earlier i could connect to the system without any problems. I am connecting to Internet thru a wireless network-cable connection & firewall is disabled. Recenly i configured home network(workgroup configuration) for file sharing with another system, after this configuration Sapgui is giving this error. I tried different ways but in vain. Can anybody help me regarding this.
Thanks
Pavan.

Hi All,
I'm having the same error and I don't find any information on the internet to solve this issue.

HT5460 I can not update to the new OS X Mountain Lion. Whenever I do I get a message an error has occurred, timed out 102.W

I can not update to the new OS x Mountain Lion. I get an error that says it has timed out then "102". WHy can't I get it update??
Thanks for your help.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Error "KSRPC.SendPacket: Timed out on Socket header" when stopping iAS

Similar Messages

Maybe you are looking for