Error Labview 2010 installation

I get an error when i am installing LabVIEW on a System with : WinXP SP3. I tried this by starting the setup. The autorun.exe cannot start (Signature: ErrorEventType : InPageError     P1 : c000003c     P2 : 00000005   )
I have all the versions (from LV7.0 to LV2009SP1) installed on my Computer.
Can Anybody Help?? (i have already LV2010 on my laptop with Win7. but i need it on my computer also)
A million thanks for any help.
RENN
Kudos always welcome for helpful posts

Hi Philip,
Thanks a lot for your reply!
could you please explain me why this happens and why should i register this dll.
Note: after running the command i got another error (Load Library error). dll not found. But its already in System 32.
RENN
Kudos always welcome for helpful posts

Similar Messages

  • Labview 2010 installation fails

    Hi,
    I am trying to install LV2010 but all my attempts have failed so far. I installed it -> reboot -> the error message came "The installation of this application may be corrupt" [or something very similar]. I couldn't even run the License manager or any sort of NI softwares because the same error message popped up. Then I deleted the complete National Instruments folder from the Program Files, stopped all NI services in the Control Panel - Administration tools and rebooted the computer. 
    After all that I tried to reinstall LV2010 but I got the error message during the installation that at first "Labview 2010 must be installed" [or something very similar]. At one software component the installer told me that "Labview 8.6 must be installed"...
    Does somebody have an idea how to proceed?
    The OS is Vista.
    Thanks,
    Krivan

    Hi Krivan,
    It sounds like you need to clean up your registry.
    Give this link a lookover. If it doesn't help please post back.
    http://digital.ni.com/public.nsf/allkb/8703592D07C91AD586256B44000248C6?OpenDocument
    Best Regards,
    Chris
    National Instruments - Tech Support

  • DAQmx support for LabVIEW 2010

    FYI to those downloading LabVIEW 2010 from NI web site:
    After Installing LabVIEW 2010 (download from web site), I noticed that there is no support for DAQmx (i.e.. VI libraries) in NI_DeviceDrivers-February2010 DVD (my latest copy).  Your have to download and install DAQmx 9.2 drivers (the first to include LabVIEW 2010 support).
    Additionally, If you were using Traditional NI-DAQ (Legacy) 7.4.4 VIs in a prior version of LabVIEW, you must do one of the following:
          1. Uninstall current Traditional NI-DAQ (Legacy) 7.4.4 installation and re-install after completing LabVIEW 2010 installation.
              Reason: Traditional NI-DAQ (Legacy) installs support only for the latest version of LabVIEW found on the system.
    Or
          2. Copy the the "<previous LabVIEW>\vi.lib\Daq" directory and all it contents to a new "<LabVIEW 2010\vi.lib\Daq directory.  This way you can use Traditional NI-DAQ in both versions of LabVIEW.

    I didn't have DVDs, I had to download.
    Yes it was a mess.  The device driver download took forever (NI can't help that).  The installation took beyond forever (what else can be done?). 
    I was disappointed that I had to do all of this backing up of legacy folders and restoring them after installing the device drivers.  Why does NI always have device drivers and toolkits install to the latest version of Labview only?  Why couldn't they leave the legacy stuff alone??  I still use LV2009 and wanted to try LV2010.  This involved a whole lot of trouble and time. 
    NI needs to provide a much easier way to upgrade, while still allowing previous versions to work without modification.  Most people who upgrade will not completely abandon the older versions.
    - tbob
    Inventor of the WORM Global

  • I'm getting a cwinstr error after upgrading from labview 7.0 to labview 2010

    Hello
     recently upgraged a PC from Labview 7.0 pro to Labview 2010 pro. Now I can not open a calibration executable we been using for a xantrex xfr power supply (unfortunately I don't have source code). The only error I get is "cwinstr-can't load program" pop-up when trying to run the executable. The calibration SW will run on multiple platfroms, Win 95, Win 200 0 and XP and this is the first time getting this error. The calibration SW ran fine until the Labview 2010 install. My question is does LV 2010 change the registry files when loaded? Visa and MAX still run fine on this PC and were loaded when LV 7.0 was installled. I know the calibration SW uses the VISA drivers so this is what's confusing. i don't want to downgrade back to LV 7.0  unless I have to.
    Thanks

    Hello Tanya,
    I'm a little confused here. i only started having issues with the executable (it ran previously with the visa drivers from 7.0) after I loaded LV2010. After the install, the exectuable started giving me the cwinstr error. As best I can tell, this may be an activex issue, but since I only have the executable it hard to tell.
    My question id do i have to install both labview 7.0 in addition to labview 2010 on the pc. Fom the the readme file, it looks like Labview 2010 won't support certain vi's older than 8.0. But since I'm dealing with an exectuable only here, I thought I  should be able to open it at least.
    So instead of updating the visa drivers, should i re-install the old visa drivers (Ni-Max) for 7.0 instead? would this even work without removing LV2010.
    Thanks Again

  • LabVIEW 2010 only installs if DVD drive is D:

    My DVD drive letter was F or G and the installer for the LabVIEW 2010 Developer Suite would not run properly.  I believe the error was that a file was missing. I decided to try and make the drive D: and it worked after that.
    Just though others should know.
    Chris Megdanoff

    LV 2010 was missing from the distribution I was using.  After downloading the missing piece, install from F: went fine.

  • LabVIEW 2010 Abrupt Termination During Installation

    Hi.
    I am using a computer that runs on windows 7-professional-64bit
    When I tried to install LabVIEW 2010 it showed the following error msg...
    the screenshots are attached.....
    Best regards,
    Black
    Attachments:
    Installation Error.zip ‏256 KB

    Have you started the setup with administrative rights ? I think you have to.
    I've made this setup without a problem.

  • Error of LabView 2010 sp1 installed on win7 64bit

    I installed LabView 2010 sp1 in a brandnew machine with 64bit Windows7.
    During the process of initialize LabView, an error message coms out.
    Could anyone help to solve this problem?
    Thank you so much!
    Attachments:
    Error.png ‏45 KB

    That appears to be a problem with your .NET installation, not LabVIEW. I'd suggest repairing or reinstalling your .NET framework.

  • Developer error when installing Labview 2010

    Dear Administrator,
    I uninstalled my old version of Labview 7.1 with Windows "Programs and Features", and try to install Labview 2010. However, error occurs. 
    It says:
    " Developer Error. The following errors were found in your ini file:
    1. Specified file not found: [Utilities] UpgradeManagerPostProcessro = bin\nipie.exe
    2. Specified file not found: [Utilities] NISysinfo = C:\Users\...\NI.LabVIEW.2010.v10.0\bin\NISysInf.dll
    Correct the ini file and try again."
    My system is WIN 7 English version.
    Help please.

    Hello,
    The first step I reccomend you try is to re-download the LabVIEW installer, and try to run it again.  Also, make sure you have Administrator access on your computer.
    You can download LabVIEW here.
    Regards,
    Matt M.
    Applications Engineer
    National Instruments

  • Problems with Installer LabVIEW 2010 SP1

    Hi,
    I am trying to build an installer for an .exe using the project tool.  I can build the .exe, but I get the following error message when I try to build the installer:
    CDK_Build_Invoke.vi.ProxyCaller >> CDK_Build_Invoke.vi >> CDK_Engine_Main.vi >> IB_MSI.lvclass:Build.vi >> IB_MSI.lvclass:Engine_Build.vi >> NI_MDF.lvlib:MDFBuildDist_Build.vi
    Loading product deployment informationAdding files to installerDone adding filesPreparing to build deploymentCopying products from distributionsCopying distribution 'NI-Serial 3.7' from: C:\National Instruments Downloads\NI-Serial\3.7.0\ to: D:\workspace\swarm\trunk\LabVIEW\builds\SWARM Analysis Viewer v1.0.1\SWARM Analysis Viewer v1.0.1 Application Installer\Copying distribution 'sapphire_sw_packet_reader' from: D:\workspace\Sapphire GSE\LabView\LabVIEW 2009\source\builds\sapphire_sw_packet_reader\Sapphire Sub Window Packet Reader Installer\Volume\ to: D:\workspace\swarm\trunk\LabVIEW\builds\SWARM Analysis Viewer v1.0.1\SWARM Analysis Viewer v1.0.1 Application Installer\Building deploymentCopying setup filesSetting merged database informationSetting product informationSetting developer part informationStarting final buildValidating... ***************** Error: An internal tool or library returned an error. (Error code -21)Error MessagesInput directory 'C:\National Instruments Downloads\NI-Serial\3.7.0\Products\MDFSupport\MDF' not found for part 'MDFSupport.msi' in product 'C:\Program Files\National Instruments\Shared\MDF\Manifests\MDF Support {1814BD68-741C-429B-9EA7-C6D1385777C8}.xml'.Input directory 'C:\National Instruments Downloads\NI-Serial\3.7.0\Products\MDFSupport\MDF' not found for part 'EulaDepot.msi' in product 'C:\Program Files\National Instruments\Shared\MDF\Manifests\MDF Support {1814BD68-741C-429B-9EA7-C6D1385777C8}.xml'.Input directory 'D:\workspace\Sapphire GSE\LabView\LabVIEW 2009\source\builds\sapphire_sw_packet_reader\Sapphire Sub Window Packet Reader Installer\Volume\Products\LabVIEW_Web_Server_RTE_2010\LVRTEWebServer' not found for part 'NIWebServer_LVRTE.msi' in product 'C:\Program Files\National Instruments\Shared\MDF\Manifests\NI LabVIEW 2010 Run-Time Engine Web Server {DB68B420-5382-48EE-9A2A-CB984FEBB192}.xml'.Input directory 'D:\workspace\Sapphire GSE\LabView\LabVIEW 2009\source\builds\sapphire_sw_packet_reader\Sapphire Sub Window Packet Reader Installer\Volume\Products\LabVIEW_RT_NBFIFO_2010\LVRT_NBFifo' not found for part 'LVRT_NBFifo_2010.msi' in product 'C:\Program Files\National Instruments\Shared\MDF\Manifests\NI LabVIEW 2010 Real-Time NBFifo {2BC9B2CE-D569-4ADC-A8A0-170F2FD57139}.xml'.Input directory 'D:\workspace\Sapphire GSE\LabView\LabVIEW 2009\source\builds\sapphire_sw_packet_reader\Sapphire Sub Window Packet Reader Installer\Volume\Products\LabVIEW_SysStatePublisher_2010' not found for part 'NI_SysStatePub.msi' in product 'C:\Program Files\National Instruments\Shared\MDF\Manifests\NI System State Publisher {19F59734-0740-49E6-818D-53C1CA6B4ABE}.xml'.Input directory 'D:\workspace\Sapphire GSE\LabView\LabVIEW 2009\source\builds\sapphire_sw_packet_reader\Sapphire Sub Window Packet Reader Installer\Volume\Products\LabVIEW_SysStatePublisher_2010' not found for part 'NI_SysStatePub64.msi' in product 'C:\Program Files\National Instruments\Shared\MDF\Manifests\NI System State Publisher {19F59734-0740-49E6-818D-53C1CA6B4ABE}.xml'.
    ***************** Error Details:Error in MDF API function: _MDFBuildDist_BuildError List.\InputParser.cpp(255): IInstallerError 120Input directory 'C:\National Instruments Downloads\NI-Serial\3.7.0\Products\MDFSupport\MDF' not found for part 'MDFSupport.msi' in product 'C:\Program Files\National Instruments\Shared\MDF\Manifests\MDF Support {1814BD68-741C-429B-9EA7-C6D1385777C8}.xml'.While validating input parts.
    .\InputParser.cpp(255): IInstallerError 120Input directory 'C:\National Instruments Downloads\NI-Serial\3.7.0\Products\MDFSupport\MDF' not found for part 'EulaDepot.msi' in product 'C:\Program Files\National Instruments\Shared\MDF\Manifests\MDF Support {1814BD68-741C-429B-9EA7-C6D1385777C8}.xml'.While validating input parts.
    .\InputParser.cpp(255): IInstallerError 120Input directory 'D:\workspace\Sapphire GSE\LabView\LabVIEW 2009\source\builds\sapphire_sw_packet_reader\Sapphire Sub Window Packet Reader Installer\Volume\Products\LabVIEW_Web_Server_RTE_2010\LVRTEWebServer' not found for part 'NIWebServer_LVRTE.msi' in product 'C:\Program Files\National Instruments\Shared\MDF\Manifests\NI LabVIEW 2010 Run-Time Engine Web Server {DB68B420-5382-48EE-9A2A-CB984FEBB192}.xml'.While validating input parts.
    .\InputParser.cpp(255): IInstallerError 120Input directory 'D:\workspace\Sapphire GSE\LabView\LabVIEW 2009\source\builds\sapphire_sw_packet_reader\Sapphire Sub Window Packet Reader Installer\Volume\Products\LabVIEW_RT_NBFIFO_2010\LVRT_NBFifo' not found for part 'LVRT_NBFifo_2010.msi' in product 'C:\Program Files\National Instruments\Shared\MDF\Manifests\NI LabVIEW 2010 Real-Time NBFifo {2BC9B2CE-D569-4ADC-A8A0-170F2FD57139}.xml'.While validating input parts.
    .\InputParser.cpp(255): IInstallerError 120Input directory 'D:\workspace\Sapphire GSE\LabView\LabVIEW 2009\source\builds\sapphire_sw_packet_reader\Sapphire Sub Window Packet Reader Installer\Volume\Products\LabVIEW_SysStatePublisher_2010' not found for part 'NI_SysStatePub.msi' in product 'C:\Program Files\National Instruments\Shared\MDF\Manifests\NI System State Publisher {19F59734-0740-49E6-818D-53C1CA6B4ABE}.xml'.While validating input parts.
    .\InputParser.cpp(255): IInstallerError 120Input directory 'D:\workspace\Sapphire GSE\LabView\LabVIEW 2009\source\builds\sapphire_sw_packet_reader\Sapphire Sub Window Packet Reader Installer\Volume\Products\LabVIEW_SysStatePublisher_2010' not found for part 'NI_SysStatePub64.msi' in product 'C:\Program Files\National Instruments\Shared\MDF\Manifests\NI System State Publisher {19F59734-0740-49E6-818D-53C1CA6B4ABE}.xml'.While validating input parts.
    *** End Error Report************** Done building deployment
    Any ideas?
    Thanks.
    Bob

    CDK_Build_Invoke.vi.ProxyCaller >> CDK_Build_Invoke.vi >> CDK_Engine_Main.vi >> IB_MSI.lvclass:Build.vi >> IB_MSI.lvclass:Engine_Build.vi >> NI_MDF.lvlib:MDFBuildDist_Build.vi Loading product deployment information Adding files to installer Done adding files Preparing to build deployment Copying products from distributions Building deployment Copying setup files Setting merged database information Setting product information Setting developer part information Starting final build Validating... Copying files... Updating files... Creating merged database... ************** *** Error: Windows SDK function returned an error. (Error code -12) ************** *** Error Details: Error in MDF API function: _MDFBuildDist_Build ERROR: Caught Windows Error: The operation completed successfully. Unable to CreateFile for MSI ReadStream target file *** End Error Report ************** Done building deployment
    I have same errors, plz see above, can anyone help?
    MJ

  • BootCamp 5.0 error on 13" MacBook Pro Mid-2010: "Installation Error. Boot Camp x64 is unsupported on this computer model"

    Installing Boot Camp 5.0.5033 (downloadable at http://support.apple.com/kb/DL1638) on Windows 8 x64 on 13” MacBook Pro Mid-2010 using BootCamp\setup.exe, I get the following message: “Installation Error. Boot Camp x64 is unsupported on this computer model”.
    According to http://support.apple.com/kb/HT5634, Windows 8 x64 is not supported by Boot Camp 5 on 13” MacBook Pro Mid-2010 .
    Previous version, Boot Camp 4.0, causes bluescreens on Windows 8 (https://discussions.apple.com/message/20131524#20131524).
    Fortunately, it might be still possible to employ updated Boot Camp by launching “msiexec /i BootCamp.msi” from BootCamp\Drivers\Apple folder using administrative command prompt (http://technet.microsoft.com/en-us/library/cc947813%28v=WS.10%29.aspx).
    However, new Boot Camp 5.0.5033 does not contain all the drivers for 13” MacBook Pro Mid-2010. E.g. driver for NVIDIA nForce System Management Controller (labeled Other devices/Coprocessor in Control Panel) and NVIDIA nForce PCI Systems Management (labeled Other devices/SM Bus Controller in Control Panel) must be obtained at Drivers\NVidia\NVidiaChipset64 in older Boot Camp 4.0 (downloadable at http://support.apple.com/kb/DL1634)
    According to Microsoft (http://windows.microsoft.com/en-US/windows-8/system-requirements), the MacBook Pro config (Intel Core 2 Duo P8600 2.4GHz, 4GB RAM) exceeds Windows 8 x64 hardware requirements. Windows Experience Index for this laptop is approx. 5.1 (http://windows.microsoft.com/en-US/windows-8/what-windows-experience-index).
    Does anybody know, is there any technical reason why Windows 8 x64 is not supported by Boot Camp 5 on 13” MBP Mid-2010?
    Is there a specific hardware/firmware deficiency in this MacBook model, incompatible with Win8? Maybe NVIDIA refused to provide Win8-compatible drivers for its chipset components (GeForce 320M graphics card though is still supported by latest notebook drivers available at www.geforce.com)?

    Thanks for the detailed explanation! If MacBook supports AHCI/SATA only in native “UEFI mode”, while reverting back to PATA/IDE in legacy “BIOS mode”, then it could make perfect sense to use UEFI to make sure that technology like Native Command Queuing (NCQ) is employed, as it may give noticeable performance improvements for certain operations: www.happysysadm.com/2012/12/intel-g530-nas-performance-part-3.html. I wonder how do you get Windows 8 x64 with EFI bootloader installed on MacBook?
    Simply choosing EFI Boot (“Some EFI platforms support both UEFI and BIOS firmware. On some of those systems, it is not always clear if the default DVD boot option is an EFI or BIOS boot option. On these systems, using the EFI shell command may be required. If you do not specifically start Windows Setup by using the EFI boot entry, the default firmware boot entry for BIOS may be used. If Windows Setup starts in BIOS mode on a combined EFI/BIOS system, the ESP and MSR partitions are not created.”) from Win8 x64 DVD when installing on blank HDD would yield “The computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed" message. Also, if the hard drive was not in SATA mode during Windows installation, registry tweaking may be required before switching from PATA to SATA. Do you do registry tweaking and EFI bootloader configuration manually after a copy of Windows was installed in its dedicated partition in a regular way?

  • LV runtime error in file C:\Program Files\National Instruments\LabVIEW 2010\CCodeGen\libsrc\os\rtx\LVThreads_rtx.c

    Hello,
    I tried to run my application on LM3S8962.
    The build succeeded. All LEDs are green,
    but the application doesn't run.
    The error message appears in the status window:
    [17:06:21] Status: Build Succeeded.
    LV runtime error in file C:\Program Files\National Instruments\LabVIEW 2010\CCodeGen\libsrc\os\rtx\LVThreads_rtx.c at line 141: 2 19
    This message isn't really enlightening to me.
    Doesn't anyone know how to solve the problem?

    Hi Peter,
    i tried to modify the code to isolate the problem.
    With the attached code the new error message appears:
    LV runtime error in file C:\Program Files\National Instruments\LabVIEW 2010\CCodeGen\libsrc\blockdiagram\CCGClusterSupport.c at line 141: 2 13
    What are the limits of clusters in LV ARM?
    My Toolchain:
    Tool Version Numbers:
    Toolchain:        RealView MDK-ARM  Version: 4.11
    Toolchain Path:    BIN40\
    C Compiler:         Armcc.Exe       V4.0.0.728
    Assembler:          Armasm.Exe       V4.0.0.728
    Linker/Locator:     ArmLink.Exe       V4.0.0.728
    Librarian:             ArmAr.Exe       V4.0.0.728
    Hex Converter:      FromElf.Exe       V4.0.0.728
    CPU DLL:               SARMCM3.DLL       V4.11
    Dialog DLL:         DLM.DLL       V1.19a
    Target DLL:             BIN\UL2CM3.DLL       V1.63
    Dialog DLL:         TLM.DLL       V1.19a
    Thanks
    Marco
    Attachments:
    ICUA4_SOURCE_DISTRIBUTION.zip ‏463 KB

  • Building App Gives Error 6 about 50 - 80 - 99% of the time. Windows7, LabVIEW 2010 SP1

    Hi
    First off here is a link to a discussion of the problem.  http://forums.ni.com/t5/LabVIEW/Error-6-occurred-when-building-an-Executable-in-Labview-2009/m-p/997...
    I have tried all the suggestions on this link with no luck.
    Background:   have been using LabVIEW 2010 without problems since Sept, then I started getting the error 6 with the following message.
    " Error 6 occurred at Delete in AB_Engine_Delete_Internal_Files.vi->AB_EXE.lvclass:Build.vi
    ->AB_Engine_Build.vi->AB_Build_Invoke.vi->AB_Build_Invoke.vi.ProxyCaller "
    This started on one project and is now occurring on another project.  Sometimes it builds 50% of the time, other times I can't get it to build at all.  I have upgraded to SP1, no change.
    Here are some things I have tried.
    Moved build directory to c:\a
    Renamed project, moved project right under c:\
    Disabled Google , disabled Win indexing, disabled Win7 user acct. Control, run LabVIEW as Admit all the time, win explorer closed
    mass compiling, closing the project, closing LabVIEW, re-booting
    Unistalled LabVIEW 2010 SP1 and re-install, twice.
    I believe I rebuilt my project in a new project.
    I moved my projects to a WinXP system laptop I have, and they never get Error 6 !  Short term fix, but I have to use Win7.  So I hope this means it is not my code.
    The funny thing is that this is totally random.  The unfunny thing is having to explain to a client I can't get my code to compile during a frustrating 95% of the time failure episode, yikes!
    Any help and suggestions would be welcome.
    BTW, the next step is to totally uninstall LabVIEW with a 'special' procedure and piece of code sent to me.  Don't want to, but am really at wits end.  Also waiting to hear back from my service ticket, but am desperate to have parallel solutions to try.
    Thanks
    Mark Ramsdale

    Thanks for the clarify.
    I also meant to post this link.  It has a lot of info, this is the link I tried most if not all of the suggestions for.
    http://forums.ni.com/t5/LabVIEW/Get-Error-6-about-50-of-time-when-building-Application/td-p/1242634
    By the way, I was told that uninstalling LabVIEW will not resolve the issue, dodged a time killer :-)
    It seems the error is caused by Win7 and file reserving.  Waiting to hear back on that.  Have an SR.
    Again, any suggestions welcomed, maybe some Win7 ideas from those who know more about it.
    mr
    Mark Ramsdale

  • Facing memory error during shifting from 3d stem graph to 3d surface graph in labview 2010

    hello all,
    earlier I was using 3D Stem graph in labview 2010. Now we want to move to Surface plot for same data.when i am trying surface graph it shows memory error.
    I have  10240 data.
    I was using vector method in stem graph so now for Surface graph i have thought that i have to make matrics of 10240x10240 and its diagonal elements should be my Z co0ordiants.
    plz help me out here.
    thanks & regards, 

    hello mikeporter,
    thanks for reply.I am attaching my Vi. It has some error also.plz look into it.
    X and Y are my co-ordinates pairs.I will be having values for these and have to update for same.
    Attachments:
    Untitled 2_surface.vi ‏184 KB

  • Error Code 8224 Ldifde Exchange 2010 installation failure

    Hi, here is a problem I have been bashing my head with for about a week. I am transitioning to Exchange 2010 from 2003. I have two DC's running Windows Server 2003 Sp2, one of which is the Exchange 2003 server. I have just brought online a windows 2008R2
    member server, which I am attempting to install exchange 2010 on. I get the following error message during installation.
    Organization Preparation
    Failed
    Error:
    The following error was generated when "$error.Clear(); install-ExchangeSchema -LdapFileName ($roleInstallPath + "Setup\Data\"+$RoleSchemaPrefix + "schema1.ldf")" was run: "There was an error while running 'ldifde.exe' to
    import the schema file 'C:\Windows\Temp\ExchangeSetup\Setup\Data\PostExchange2003_schema1.ldf'. The error code is: 8224. More details can be found in the error file: 'C:\Users\administrator.CFN\AppData\Local\Temp\2\ldif.err'".
    There was an error while running 'ldifde.exe' to import the schema file 'C:\Windows\Temp\ExchangeSetup\Setup\Data\PostExchange2003_schema1.ldf'. The error code is: 8224. More details can be found in the error file: 'C:\Users\administrator.CFN\AppData\Local\Temp\2\ldif.err'
    Elapsed Time: 00:00:22
    And from the ldif.err:
    The connection cannot be established
    The error code is 8224
    Now I have checked dns, all is good. I can resolve the DC without issue.
    I have done dcdiag and netdiag and passes all tests. I have even written a hosts file, all this to no avail.
    Any help would be appreciated.
    Thanks
    B

    I had a same and I fixed this........
    Solution
    1. The error is happening at the "Organization Preparation" stage, so let's go 'old school' and do that manually.
    2. Locate the server on your network that is the schema master (Locate FSMO Servers).
    3. Put the Exchange 2010 DVD in the schema master (Or share it over the network and connect to it from the schema master server).
    4. Drop to command line and change to the DVD Drive/Directory with the Exchange 2010 setup files in it.
    5. ONLY do this if you have Exchange 2003 already! Run the following command, (If no Exchange 2003 present, skip to the next step).
    X:\Setup /PrepareLegacyExchangePermissions (Where "X" is CD ROM derive letter)
    6. Run the following command:
    X:\Setup /PrepareSchema
    7.
    Run the following command:
    X:\Setup /PrepareAD
    Note: At this point it may fail, and say it requires an organization name, (it will do this if it finds no existing container in Active Directory).
    Error
    Exchange organization name is required for this mode.  To specify an organization name, use the /organizationName parameter.
    If that is the case, then run the following command:
    X:\Setup /PrepareAD /OrganizationName:"Your required org name"
    Reboot your server and try to install exchange 2010.
    Jotiba Patil

  • Error 7 when opening file running LabVIEW 2010 executable

    I am using Open/Create/Replace File in LabVIEW 2010 to open a text file.  This works fine until I compile the code.  I then get Error 7. I have tried paths that look like the following but none work.
    c:\<directory name>\file.txt
    c:\<application name.exe>\file.txt
    c:\<application.exe>\<directory name>\file.txt
    Thanks
    Solved!
    Go to Solution.
    Attachments:
    read.vi ‏17 KB

    You have to get the path to the folder of the .exe.  Then strip off the .vi name and the .exe name.  Then Build onto the path from there to get to your .txt file.  The way you have it, you are treating the .exe as a folder rather than a file.  The text file is not part of the .exe, so you can't create a path that includes the .exe name.
    Why Does My Executable Not Work When Using the Current VI's Path Constant?

Maybe you are looking for