Error : Language Key is Initial

Hi,
     I am facing problem with Vendor Master Text data loading. I am getting error in PSA called "Record 1 : ZCRM_VND : Data record 1('0000000001'): Language key is initial" for all records.
    I dont have any language key field in the source system, and I am not using language field in transfer structure. According to few forums they replied to uncheck the language dependent option in the info object properties. But I am not able to do any edit.
   Pls can one tell me wht would be the problem?
Thanks
Ganesh.

Hi Chandran/Sam,
                           I am sure that we have Global Language text exist in source system, but there is not language field in standard data source 0vendor_text. If I restrict with EN in trasfer rule then that might be a problem if you have any other language text in source system.
                          I deleted the request in PSA but still I am not able to uncheck the 0Langu. And one more thing this 0Langu object is automatically reflecting in Transfer rules and I cant see it in transfer structure.
                          Please give me any other options
Thanks
Ganesh.

Similar Messages

Record 3 :0OPERATION : Data record 3 ('0001004854220010 ') : Language key i

Hi
when i am loading the data i got the error " Record 3 :0OPERATION : Data record 3 ('0001004854220010 ') : Language key is initial " .
lot of records are there like this.
Can you put a light on this.
Reward points .
Thx
siva

Even I am facing the same problem. Can any one help us out. I have Master data load, but as Info provider loading. I have added 0LANGU in attributes info source and in my flat file, i have 'E' as the value for 0LANGU. When I load attributes data, it gets succesfull along with 'EN' for 0LANGU (Conversion). In my text info source I have Key Number and Medium description fields. When I load Text file, it gives me the error ' ' Record 1 :0OPERATION : Data record 3 ('0001004854220010 ') : Language key is initial' and its for all records in the text file.
Edited by: venu Avula on Jun 16, 2008 9:52 PM

Unit of measure with language Key

Hello Guruz,
WHile creationd of purchase order, there is a check kept which compares the vendor communication language which gets updated in the Po header - Communucation tab with Db table T006A which holds the Unit of measurements with Language Key and pops up an error message.
It cheks the order unit in the PO, and the T006A whether the unit is maintained in the Language key as in the PO header - Communiction tab.
But while creating a unit of measurement in CUNI, we dont have the option to maintain the language key for the UOM.
In CUNI, it defaults the language key as EN in table T006A.
I need a prompt support from you guys on this issue. Please suggest how to go about with this?
Best Regards
Greg.

Hello,
When i am trying to go for the language key in CUNI, it says that the said language is 'not available in server'. I guess it is checking whether the language patch is updated in the server.
But it doesn't sound logical to maintain all the unit of measurements in all the vendor languages. Suppose if we are having vendors with 75 communication languages and we are having 50 units os measurements, so does that mean that we have to maintain units of measurements 75 X 50 times ?
Kindly provide your inputs on the issue. We are facing lots of issues with this control kept in PO header checking for the T006A with the vendor communication language.
Regards
Greg

Language key not defined (CIF)

Hi experts,
currently we get an error message "Language key not defined" during the transfer of a customer from ERP to EWM (CIF - CFM1/CFM2).
Therefore no business partner in EWM is created. I read something about "One-time account" (1957563 and 1975421).
But we also have the problem for non "One-time account" customer.
How can I solve this problem?
Thanks!
Ralf

Hi Ralf
Check the SCMP tcode for comparing T002 table. with ERP client. And also check below table update method. You can maintain same record in tables and this issue is resolved.
Also about One-time account" if possible discuss with CRM consultant as BP and its factors will be decided by them.
Clarification on table T002, report RSCPLANGU and language installation
Regards
Suraj

Failed to decrypt protected XML node "DTS:Password" with error 0x8009000B "Key not valid for use in specified state

we have developed packages to do the followings
Extract data from DB2 Source and put it in MS Sql Server 2008 database (Lets Say DatabaseA).From MS Sql Server 2008 (DatabaseA)
we will process the data and place it in another database MS Sql Server 2008 (DatabaseB)
We have created packages in BIDS..We created datasource connection in Datasource folder in BIDS..Which has DB2 Connection and both Ms Sql Server connection (Windows authentication-Let
say its pointing to the server -ServerA which has DatabaseA and DatabaseB).The datasource connections will be used in packages during development.
For deployment we have created Package Configuration which will have both DB2 Connection and MS SqlServer connection in the config
We deployed the packages in different MS SqlServer by changing the connectionstring in the config for DB2 and MS SqlServer...
While runing the package we are getting the following error message
Code: 0xC0016016 Source: Description: Failed to decrypt protected XML node "DTS:Password" with error 0x8009000B "Key not valid for
use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available.
ilikemicrosoft

Hi Surendiran,
This is because the package has been created by somebody else and the package is being deployed under sombody else's account. e.g. If you are the creator then the package is encryption set according to your account and the package setup in SQL server is
under a different user account.
This happens because the package protection level is set to EncryptSensitiveWithUserKey which encrypts
sensitive information using creator's account name.
As a solution:
Either you have to set up the package in SQL server under your account (which some infrastructures do not allow).
OR
Set the package property Protection Level to "DontSaveSensitive" and add a configuration file
to the package and set the initial values for all the variables and all the connection manager in that configuration file (which might be tedious of-course).
OR
The third options (which I like do) is to open the package file and delete the password encryption entries from the package. Do note that this is not supported by designer and every time you make changes to the connection managers these encryption entries come
back.
Hope this helps.
Please mark the post as answered if it answers your question

How to change PO Language Key

Hi people , hope anyone can help with this. How can i change de Language Key at the comunications TAB on the PO Header ? it`s grey from the start and i´m not being able to change it , even before i enter the Vendor. I´ve checked the IMG config menus and it`s marked as "Optional" but still i´m not being able to change it. I know this language key comes from the vendor master , but the idea of my client is to be able to change it while doing the PO . Is it posibble ? thanks a lot !

Hi
Pls let us all know , how you solved this issue .. Pls share the steps followed by you
Rgds
Ashok

Material Description in Language key

Hi all,
Is it possible to enter more than one material description per language? Or Can I create another language key and enter more than one material description in additional data in material master?
thanks.

Hi again,
I want to enter more than one discription with same language key not one for one.
f
or example ı want to create a language key like Z1
Language key .......Description
Z1 ........................Material Desc. 1
Z1.........................Material Desc. 2
is it possible?
Edited by: Nursa on Mar 29, 2008 12:39 PM

Import Manager 'Error 5611520 - Error Saving Key Mapping'

I am using CREDITOR_EXTRACT in R/3 to send Vendor IDoc to XI and use CREMDM04 type. XI generates an XML file that I load into MDM using a client that is set up for Inbound/Outbound. The key mappings have been turned on for the Vendor repository.
In IM, I use the standard map CREMDM04 and the system maps the incoming XML file to the vendor main table. There are few values that I have to map manually - fine. Next, when I click Import, I get a error pop-up message 'Error Saving Key Mapping - Errno 5611520'.
Has anybody experienced this when using all standard content (schemas and maps) for Vendor?
Thanks in advance.

Subbu,
Found another system that has the same versions as you do. This particular error did not appear, but we got some internal IM error. Also, the SAP training demos are on the same versions as mine.
I am using MDC R/3 as the client and the CREMDM04 schema map. Not using MDM inbound ports for now. Just loading XML file generated by XI based on CREMDM04. Do you think that I need to define a Qualified Range for this client in the Console or can it be left blank?
Thanks.

Error when CRETING STOCK INITIAL UPLOAD USING MB1C

THE ERROR IS : The number range for document number assaignment has not been maintained in the year 2011 for the transaction event type WA.
we are getting this error while creating stock initial upload using t.code MB1C.
and another ERROR is : Number range for trans/event type WA in year 2011 does not exist.
please give me the solution to this error.
Moderator message:
Locked. Reason: 1) basic question 2) improper use of capitals
Please read forum rules before posting.
Edited by: Csaba Szommer on Jan 7, 2012 8:18 AM

Hi Dear,
Use T . Code u2013 OMBT, then go to change interval , then go to edit > insert year (f6) and mention in year 9999 and choose the number range interval from number to number and mention in current number is 0 and save exit.
Hope it helps you.
Regards,
Yawar Khan

How to find out what is the purchase price keyed in Initial Quantity

Dear Experts,
The stock valuation is Standard Costing.
Before this, someone else keyed in initial quantity and the purchase price in the Initial Quantities module.
Now when I issued a PO to a vendor (price list tagged with Last Purchase Price), the price shown is different.
How do I find out if the price keyed in initial quantity is correct or not? Any tables I can refer to?
I tried to track from the Inventory Posting List and the smartlink only bring me to the journal entry for the initial quantity posting. I don't have the details like item no., qty, price.\
Thanks in advance.

Hi Joyce,
Go to Inventory->Inventory transactions->Initial Quantities, Inventory Tracking, and Inventory Posting. Open Inventory Posting Tab and select your price list and items if you want or check you can see there Item quantity and old price also price list wise.
Thanks
Sachin

How to set the language key in Sales document header text?

Hi Guys,
When I am creating a sales order I found in the header text tab only three languages English, Thai and Ukranian are mentained.. So can you please tell me how to add/ delete more language keys in language key field in a step by step process???
Thanx and regards,
JEET

Just select the "unwanted language" keys (By 'right clicking') on each & then use the "delete" icon (3rd icon) on the bottom half.
you can also manintain as many languages as you want.
Pls do the needful.
Rgds
Sumanth.Gururaj
Edited by: SUMANTH GURURAJ on Jan 21, 2011 6:21 PM

Trying to install Lightroom 5 with CC but getting error code 5 on initial startup of Lightroom.

Trying to install Lightroom 5 with CC but getting error code 5 on initial startup of Lightroom. Have uninstalled all adobe products including Creative Cloud CC.
Followed the instructions on the forum by using the CC Cleaner App for OSX. Have restarted a number of times and even tried using disk utility to fix any permission probs. Still no luck.
The problem started happening from upgrading the previous version of Lightroom to the most up to date version. Im hoping someone can help me with any ideas. Thanks heaps.

Ended up fixing the problem after finding no answers. Deleted the following file
com.adobe.acc.AdobeCreativeCloud.plist

I have a MacBook Pro, Matshita UJ-857E while recording music my drive reported an error: Sense Key=HARDWARE ERROR Sense Code=0x03,0x01 I have no idea what this means, and now my cd burner/player won't work. can someone help me fix this problem?

Please Help me. I am having problems with my MATSHITA UJ-857E DVD-R burner/writer. I burned 4 cd's and then it stopped working.
I can select my songs, and then it asks for a blank disc. It starts preparing to write the disc,then it says,"
The drive reported an error: Sense Key= HARDWARE ERROR Sense Code= 0x09,0x01 TRACKING SERVO FAILURE.
Can anyone give me some advice on how to fix it or what this means because I have no idea what it is talking about or how to begin to fix the problem?

tanyafrombakersfield wrote:
It starts preparing to write the disc,then it says,"
The drive reported an error: Sense Key= HARDWARE ERROR Sense Code= 0x09,0x01 TRACKING SERVO FAILURE.
This is an error reported by the optical drive's firmware. The tracking servo is the servomechanism which guides the laser pickup along the track on the optical disc. The error means that the servo couldn't do its job within the programmed parameters. What it doesn't say is why.
You have to be very precise as to when this error occurs. If it occurs as you wrote, while it "starts preparing to write the disc", and not when it has actually began to burn, then it's likely that the drive has gone bad and needs to be replaced.
There are other possibilities, so you should check them, but they would be more likely if the error occurred after the drive began to write. OrangeMarlin has suggested two options -- try a different brand of CD or DVD, and try cleaning the lens.

When I try to install Adobe Acrobat XI Pro, I get an error message, "Key not valid for use in specified state". What is this?

When I try to install Adobe Acrobat XI Pro, I get an error message, "Key not valid for use in specified state". What is this?

See if this post by turingtest2 fixes it : key not valid for use in specified state

Copying infoobject text into a second language key

Hi all,
I need to manage material text in both IT and EN language key. Some material codes are generated in ECC only in IT, some other in both languages.
Since reporting is in any case required in english, I wish to set up something which is aimed to copy description created in IT into EN language key. This is aimed to avoid report displaying the code in all occurrences text in EN is not mainteined.
Example:
Material Code A100: text IT = Materiale A text EN = Material A
Material Code B100: text IT = Materiale B text EN = not maintained
in this case I wish to copy text Materiale B also into the language key EN.
I remember there is a standard program to manage these situations in ECC HR and I was wondering if there is something similar in BI.
Thanks to all

I'm not talking about translating Infoobject decription.
I need to have in both languages the text of an infoobject members.
For istance, considering 0MATERIAL, I need to have in both languages all 1000 material codes managed in the company although in ECC they created description in english only for 600 codes and description in italian for all 1000 codes.

Error : Language Key is Initial

Similar Messages

Maybe you are looking for