Error Launching Activty Monitor in SSMS

My PC was just upgraded from Windows 8 to 8.1. Now when I attempt to launch Activity Monitor from SSMS (2008 R2 - v10.50.2500.0) I get the error:
Can not create tool window. (Microsoft.SqlServer.Management.SqlStudio.ResourceMonitor)
Program Location:
at Microsoft.SqlServer.Management.SqlStudio.ResourceMonitor.ResourceMonitorActionHandler.PerformAction(String actionMoniker, IContext context)
Can't find anything useful on this error. Any help appreciated. Thanks in advance.

Hi CJDawson,
Glad to hear that the issue was resolved:)
Best Regards,
Tracy
Tracy Cai
TechNet Community Support

Similar Messages

Cannot launch "transport monitor"... what is this?

I just got back from a crash but I think I've been lucky. I booted up from my Tiger startup disc, did an archive and install and I think everything is pretty much ok. I do get one red flag when i log in though and I cannot find any online information about this or what to do. The message: The application "Transport Monitor" could not be launched because of a Shared Library error: "8<TransportMonitor><TransportMonitor><HotSyncLib.PPC>".
I'm guessing 2 files labeled TransportMonitor ended up somewhere and one of them has to go. Any help with this?
BTW- great Apple Discussions and archives help! I got all my info on the sites and it led me right through the steps I needed! I wish all the companies out there were so user and customer friendly!
thank-you!
booker
Mac IBook G3
OS X 10.4.11

The error message and component item listed is often in reference
to an installation of Palm desktop software.
One of several articles I found as a result of a search of the error
message ' transport monitor ' that came up says to reinstall the
Palm software again. If you have done an archive & install,
or other system changes were made, some of the parts of such
an application support for hardware may be deficient or corrupt.
{You could see about removing parts of unused software installs
by getting and using a utility such as AppDelete.}
ie: "Error: Transport Monitor could not be launched; fix" - MacFixit:
http://www.macfixit.com/article.php?story=20060508093106808
Other references to the cause of this Transport Monitor error or fix
can be seen in other articles or posts from different locations online.
This topic has also been discussed in Apple Support Discussions.
ie: google search topic, ' mac os x transport monitor ' results page:
http://www.google.com/#hl=en&q=macos+x+transport+monitor&aq=0&oq=Mac+OS+Xtransport&aqi=g1&fp=leBsIIJAIN0
If you have and use the Palm product, you may decide to reinstall the
correct driver software for the item; or find and delete specific parts of
that driver software using AppDelete (comes up in search) & be rid of it.
Good luck & happy computing!

Cannot launch Activity Monitor on Maverics 10.9.2

Is there anyone with the same problem for giving me a solution "Why I can't launch Activity Monitor on Maverics 10.9.2 Macbbok Pro?" ?

Has always worked for me. Try this:
Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
Reinstall Mountain Lion or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.

System error in message monitoring

Hello,
Scenario is proxy to database. Status seems to sytem error in message monitoring. Error detail is In audit log of message details as belows:
JDBC Message processing failed, due to Error processing request in sax parser: Error when executing statement for table/stored proc. 'If_test ' (structure 'STATEMENT'): java.sql.SQLException: ORA-00936: missing expression
I should resent this message content. When i press Resend tab in message monitoring, error status is not being changed.
Thanks in advance

Hi,
Check the payload received is correct or not in this case ...
Take payload and check at mapping level...
if you are using insert or update statement you can enable log at the receiver jdbc channel in advance mode(logSQLStaement to true) to see how the statement is getting framed ...
HTH
Rajesh

Error Launching LR 5: "Lightroom encountered an error when reading from its preview cache and..."

Error Launching LR 5: "Lightroom encountered an error when reading from its preview cache and needs to quit. Lightroom will attempt to fix this problem the next time it launches."
I've tried renaming my catalog.lrcat file. I've copied over my most recent backup of the catalog.lrcat and that didn't work either.

On Mac:
PS - to open the previews "folder" (a "package" is just a "special" folder) on Mac, ctrl-click and choose "Show package contents.." - same way you open any other special folder, like .app or .lrplugin..
Rob

System Error in Message Monitoring while it shows checked flag in SXMB_MONI

Hia,
We are working on ABAP Proxy --> SAP PI 7.1 --> SOAP (Asynchronous Scenario).
(ECC -> PI -> Legacy CRM)
I have following queries:
1. While sending messge across to Legacy system, we can see CHECKED flag in SXMB_MONI but there is System Error in Message Monitoring. When checked legacy system is unable to receive any message. Cannot understand the issue.
2. Is there any way to check in PI system whether the message has reached Legacy System other than making scneario synchronous?
Regards

System is getting connected and able to send asynchronous messages to legacy system. But getting following error while sending synchronous error:
2010-05-10 13:15:05     Information     Delivering to channel: CC_SOAP_SOReject_Out
2010-05-10 13:15:05     Information     SOAP: request message entering the adapter with user J2EE_GUEST
2010-05-10 13:15:05     Information     SOAP: completed the processing
2010-05-10 13:15:05     Information     SOAP: continuing to response message f33caa90-5c07-11df-c659-96d147c2ff0f
2010-05-10 13:15:05     Error     SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> Object reference not set to an instance of an object.
2010-05-10 13:15:05     Error     Adapter Framework caught exception: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> Object reference not set to an instance of an object.
2010-05-10 13:15:05     Error     Delivering the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> Object reference not set to an instance of an object.. Setting message to status failed.
2010-05-10 13:15:06     Error     The message status was set to FAIL.
I have already checked Data Structure and it is fine.
Regards
In this scenarios we are using XSLT mapping using CDATA.
Please suggest solution.

System Error in Message Monitoring -Proxy to SOAP async scenario

Hi All,
My scenario is ABAP Proxy---> SAP PI 7.1 ---> WEbService(Asynchronous SOAP ).
In Moni message is showing successful Flag, but message has got stuck in "system Error" at message monitoring.I can't see any Audit log in Message monitoring .
but in related Soap Receiver communication channel i can see the below Error
"2010-08-11 09:54:15 Error SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> Retrieving the COM class factory for component with CLSID {00226D6E-6A57-44DB-9DDC-66FDCB2869B3} failed due to the following error: 80070005.
2010-08-11 09:54:15 Information SOAP: sending a delivery error ack ...
2010-08-11 09:54:15 Information SOAP: sent a delivery error ack
2010-08-11 09:54:15 Error Adapter Framework caught exception: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> Retrieving the COM class factory for component with CLSID {00226D6E-6A57-44DB-9DDC-66FDCB2869B3} failed due to the following error: 80070005.
2010-08-11 09:54:15 Error Delivering the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> Retrieving the COM class factory for component with CLSID {00226D6E-6A57-44DB-9DDC-66FDCB2869B3} failed due to the following error: 80070005. "
Please help , what could be the problem.
Thanks in Advance.
Jyoti

Hi Jyoti,
>Is there any specific setup required at Provide side while moving to Acceptance system
I dont think so.
Please compare EXACTLY the settings of the two Comunication Channels, especially the server path. Please assure that you ve sent exactly the same message content from Acceptance system.
Regards,
Udo

Error in message monitoring while creating new record in R/3

Hi All,
I am getting the following error in message monitoring while creating a new record from SAP Mobile client.
Service name: Validation_Service
Message: BackendKeys are not filled in table HEADER returned by getDetails
I am passing some random number from Client to SAP R/3 create function module.
When i pass the same value in create FM as in message monitoring. I am able to create the record successfully,
Corresponding to newly created record, i can see the data in getdetail header also.
Not sure why this error is coming.
Appreciate your help!!
Thanks & Regards
Devendra

The CREATE FM should not only create the entry, it should also EXPORT the key that it uses to create the entry. Is it doing that?
i.e. the CREATE signature is usually something like:
CREATE_BLAH
IMPORTING header TYPE header_row
EXPORTING key type header_row-key_field.
So the 'key' here should be filled by the FM and returned to DOE.

Wrong port in FTP receiver adapter - no errors in message monitoring?

Hello all
We're on XI 3.0 SP16 and have created / configured a HTTP XML -> XI -> FTP Server scenario. In the receiver comm. channel (ftp) we had specified a wrong port number and always wondered, why we never got errors in message monitoring. Everything seemed to be processed correctly... but no file arrived on the FTP server (receiver) side!
After correcting the wrong FTP port number in the receiver FTP comm. channel everything went fine.
We now encountered a similar problem with a RFC receiver adapter. We're using it in another scenario HTTP XML -> XI -> RFC to SAP R/3 (4.7).
For some reason it died (red status in adapter monitor) and it was no more possible to do RFC calls from XI to SAP R/3 (normal RFC adapter, NO proxies).
In XI message monitor everything seemed to be ok but no message arrived till SAP R/3. Nothing in any queue...
After deactivating and reactivation the RFC receiver comm. channel it worked again BUT ALL PREVIOUSLY SENT messages seem to be lost.
Is it really the way it works? Does XI integration engine at runtime NOT catch whether or not a RFC or FTP receiver adapter died, thus is not able to tell somewhere in message monitor that a message could not be delivered at all?
I'm really confused here but hopefully I simply don't understand some easy principles to take into account...
Our SAP R/3 is on rel. 4.70 with Web AS 6.20. The XI 3.0 plugin is not installed. Do we need to go with server proxies there and use QOS = best effort?!?
Thanks for some suggestions.
Best regards,
Renaud

Hi Michal
Thanks... works great for normal XML based messages!
Now, what if I wanted to pass binary files from one ftp server via BPM to another ftp server in order to enable the transport acknowledgment?
The files polled from ftp server using the ftp sender adapter are all in binary format (ARJ). No xml data in there. How should the message format look like in BPM for the receiving step? Or: how to make sure not to loose the binary content when passing through BPMs?
I need this sort of scenario because of the tansport acknowledgment and because I need to have some sort of message splitting (send the binary file over to a second ftp server and additionally send some kind of info message to SAP R/3 regarding thin binary file).
BTW: in the MessagingSystem/monitor/monitor.jsp I do not see sender / receiver information. Is this normal? It's quite of a bad thing to look inside each message in order to find out what message I'm having in front of me...
Thanks a lot for your support and patience!
Kind regards,
Renaud

Error in Component Monitoring(Runtime Workbench)

Hi,
I am getting an error in component monitoring section of runtime workbench. I got a note(851711), where it says 'CompilingException' error can be corrected by applying SP14. But I am still getting same error after applying SP14 and redeploying XI ADAPTER FRAMEWORK CORE 3.0 (SAPXIAFC.sca), XI TOOLS 3.0 (SAPXITOOL.sca) and XI ADAPTER FRAMEWORK 3.0 (SAPXIAF.sca). Please advice how to correct this error.
Error Message:
com.sap.engine.services.servlets_jsp.server.jsp.exceptions.CompilingException: Error while executing the compilation process: D:/usr/sap/QN7/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/servlet_jsp/rwb/work/jsp_component_monitoring1138903402125.java:27: as of release 1.5, 'enum' is a keyword, and may not be used as an identifier (try -source 1.4 or lower to use 'enum' as an identifier) import com.sapportals.htmlb.enum.TableCellStyle; ^ D:/usr/sap/QN7/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/servlet_jsp/rwb/work/jsp_component_monitoring1138903402125.java:947: as of release 1.5, 'enum' is a keyword, and may not be used as an identifier (try -source 1.4 or lower to use 'enum' as an identifier) compTable.setColumnType(com.sapportals.htmlb.enum.TableColumnType.IMAGELINK, 1); ^ D:/usr/sap/QN7/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/servlet_jsp/rwb/work/jsp_component_monitoring1138903402125.java:948: as of release 1.5, 'enum' is a keyword, and may not be used as an identifier (try -source 1.4 or lower to use 'enum' as an identifier) compTable.getColumn(1).setCellHAlignment(-1, com.sapportals.htmlb.enum.CellHAlign.CENTER); ^ 3 errors .
Thanks,
Ask.

Hi,
it can be for some system configured on http destination or the sld system configured for this server.
take a look at tx sxmb_adm for the http destination to discover witch destination is been used. then, on sm59, find the server that is been called for this http destination and check on that server if this user is ok there.
to check sld, go to tx sld_apicust discover witch is the sld system configured for this server. After log on to sld system and check the user.
Maybe the user is ok on the destination system, so, check the password on sm59 (if the problem is with an http dest) or sld_apicust (if the problem is the connection to sld).
regards.
roberti

"Error in message monitoring in runtime workbench"

Hello All,
I have an error in message monitoring in runtime workbench.
We have installed PI7.0 and it should run on port 50000.But it is running on port 50100.
Please suggest what are the steps involved to resolve this problem.
Thanks and Regards
SAN
null
k san

San,
Can you please copy / paste error message.
Also check if you have set correct port in Exchange profile under Runtimeworkbench.
Nilesh

Error launching jdev9i on solaris

I installed jdev9034 version on solaris. After changing the jdk in .conf in jdev/bin , I get the following error launching jdev. The error is
Unrecognized option: -XX:MaxPermSize=64M
Could not create the JVM
Thanks,
Sunil

Solved by changing the common.sh in the <OracleBI>/setup directory, this file holds the JAVA_HOME-path. After editing restart the run-sa.sh and run-saw.sh.
Michael

I can't launch activity monitor any ideas?

I can't launch activity monitor any ideas?

Try logging into the Guest account and see if you can launch Activity Monitor.
You can also try booting to the Safe Mode to see what happens:
http://support.apple.com/kb/HT1455

Error launching default browser

I had downloaded and installed the trial versions of PSE 12 and PRE 12 in late November, 2013. Purchased both December 23, 2013 and downloaded both. Did not realize I could just enter the new product codes, and instead re-installed both. All seems to working, but when I click HELP>SUPPORT, I get error message: There was an error launching the default browser. You may need to re-install the application and the Help component. Does this refer to reinstalling PSE and PRE or the browser which is IE9? Had a chat seesion with Mohammed who told me to contact tech support who want me to pay for help. This does not seem right for a new purchase.
Also, since the purchase occured on December 23, 2013 and today is January 3, 2014 I wonder why I am already getting emails that I have reached my limit in Revel. I thought I had thirty days for unlimited initial uploads.

is your issue resolved now?
~Surendra
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

Error launching Office Client when opening a BPF hyperlink

Version: BPC 10.1 NW Standard
When opening a BPF hyperlink, I am getting a pop up with error Error Launching Office Client: Object does not support property or method 'PushActionsbyValue'.
I have seen threads about this but no definite answer.
Please help if you know the fix

Hi David,
Please check the if Microsoft office installed is 64 bit and epm addin is 64 bit then the IE should be 64 bit.
we faced the same issue long ago user is using IE 32 bit while office and epm addin are 64 bits.
Thanks,
Dinesh.V

Error Launching Activty Monitor in SSMS

Similar Messages

Maybe you are looking for