Error launching jdev9i on solaris

I installed jdev9034 version on solaris. After changing the jdk in .conf in jdev/bin , I get the following error launching jdev. The error is
Unrecognized option: -XX:MaxPermSize=64M
Could not create the JVM
Thanks,
Sunil

Solved by changing the common.sh in the <OracleBI>/setup directory, this file holds the JAVA_HOME-path. After editing restart the run-sa.sh and run-saw.sh.
Michael

Similar Messages

Error Launching LR 5: "Lightroom encountered an error when reading from its preview cache and..."

Error Launching LR 5: "Lightroom encountered an error when reading from its preview cache and needs to quit. Lightroom will attempt to fix this problem the next time it launches."
I've tried renaming my catalog.lrcat file. I've copied over my most recent backup of the catalog.lrcat and that didn't work either.

On Mac:
PS - to open the previews "folder" (a "package" is just a "special" folder) on Mac, ctrl-click and choose "Show package contents.." - same way you open any other special folder, like .app or .lrplugin..
Rob

"No Disk Found" error during installation of Solaris 10[11/06] on HP 6710b

Hallo Guys,
I am trying to install Solaris 10 on my HP 6710b lap top but it fails with "No Disk Found" error.
I used "Solaris 10 support tool" to check my system and it reports that my system is supported.
You can find the report bellow. I am sure that my disk is OK and I am also using "CD-ROM" option in BIOS for installing solaris from my Solaris DVD.
I have also updated the drivers using "CPQary3-1.71-solaris10-i386".
Please help me.
Thanks,
Qumar
Report of Sun Device Detection Tool
The table below displays the devices detected in your system along with the corresponding driver status in Solaris 10 8/07 on x86/x64 platforms.
All detected devices are supported by Solaris OS.
Solaris Driver 32-bit
Solaris Driver 64-bit
Device Type
Vendor Name
Device Name
Solaris Bundled Driver: pcic
Solaris Bundled Driver: pcic
Bridge
Ricoh Co Ltd
RL5c476 II
Solaris Bundled Driver: hci1394
Solaris Bundled Driver: hci1394
Firewire
Ricoh Co Ltd
R5C832 IEEE 1394 Controller
Third-Party Driver: bcme (Note-1)
Third-Party Driver: bcme (Note-1)
Network
Broadcom Corporation
NetLink BCM5787M Gigabit Ethernet PCI Express
Solaris Bundled Driver: ahci
Solaris Bundled Driver: ahci
Storage
Intel Corporation
82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller
Solaris Bundled Driver: uhci
Solaris Bundled Driver: uhci
USB
Intel Corporation
82801H (ICH8 Family) USB UHCI Controller #1
Solaris Bundled Driver: uhci
Solaris Bundled Driver: uhci
USB
Intel Corporation
82801H (ICH8 Family) USB UHCI Controller #2
Solaris Bundled Driver: uhci
Solaris Bundled Driver: uhci
USB
Intel Corporation
82801H (ICH8 Family) USB UHCI Controller #3
Solaris Bundled Driver: uhci
Solaris Bundled Driver: uhci
USB
Intel Corporation
82801H (ICH8 Family) USB UHCI Contoller #4
Solaris Bundled Driver: uhci
Solaris Bundled Driver: uhci
USB
Intel Corporation
82801H (ICH8 Family) USB UHCI Controller #5
Solaris Bundled Driver: ehci
Solaris Bundled Driver: ehci
USB
Intel Corporation
82801H (ICH8 Family) USB2 EHCI Controller #1
Solaris Bundled Driver: ehci
Solaris Bundled Driver: ehci
USB
Intel Corporation
82801H (ICH8 Family) USB2 EHCI Controller #2
[W] Solaris Bundled Driver: audiohd
[W] Solaris Bundled Driver: audiohd
Multimedia
Intel Corporation
82801H (ICH8 Family) HD Audio Controller
Solaris Bundled Driver: pci-ide
Solaris Bundled Driver: pci-ide
Storage
Intel Corporation
82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller
[W] Solaris Bundled Driver: vgatext
[W] Solaris Bundled Driver: vgatext
Video
Intel Corporation
Mobile GM965/GL960 Integrated Graphics Controller
Open Solaris Driver: wpi (Note-2)
Open Solaris Driver: wpi (Note-2)
Network
Intel Corporation
PRO/Wireless 3945ABG Network Connection
[W]: (1) No Dedicated Xorg Driver supporting Graphic Interface
(2) Driver support for indicated device not guaranteed
Note-1: http://www.broadcom.com/support/ethernet_nic/.
Note-2: http://opensolaris.org/os/community/laptop/wireless/wpi.

Hallo Guys,
I am trying to install Solaris 10 on my HP 6710b lap top but it fails with "No Disk Found" error.
I used "Solaris 10 support tool" to check my system and it reports that my system is supported.
You can find the report bellow. I am sure that my disk is OK and I am also using "CD-ROM" option in BIOS for installing solaris from my Solaris DVD.
I have also updated the drivers using "CPQary3-1.71-solaris10-i386".
Please help me.
Thanks,
Qumar
Report of Sun Device Detection Tool
The table below displays the devices detected in your system along with the corresponding driver status in Solaris 10 8/07 on x86/x64 platforms.
All detected devices are supported by Solaris OS.
Solaris Driver 32-bit
Solaris Driver 64-bit
Device Type
Vendor Name
Device Name
Solaris Bundled Driver: pcic
Solaris Bundled Driver: pcic
Bridge
Ricoh Co Ltd
RL5c476 II
Solaris Bundled Driver: hci1394
Solaris Bundled Driver: hci1394
Firewire
Ricoh Co Ltd
R5C832 IEEE 1394 Controller
Third-Party Driver: bcme (Note-1)
Third-Party Driver: bcme (Note-1)
Network
Broadcom Corporation
NetLink BCM5787M Gigabit Ethernet PCI Express
Solaris Bundled Driver: ahci
Solaris Bundled Driver: ahci
Storage
Intel Corporation
82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller
Solaris Bundled Driver: uhci
Solaris Bundled Driver: uhci
USB
Intel Corporation
82801H (ICH8 Family) USB UHCI Controller #1
Solaris Bundled Driver: uhci
Solaris Bundled Driver: uhci
USB
Intel Corporation
82801H (ICH8 Family) USB UHCI Controller #2
Solaris Bundled Driver: uhci
Solaris Bundled Driver: uhci
USB
Intel Corporation
82801H (ICH8 Family) USB UHCI Controller #3
Solaris Bundled Driver: uhci
Solaris Bundled Driver: uhci
USB
Intel Corporation
82801H (ICH8 Family) USB UHCI Contoller #4
Solaris Bundled Driver: uhci
Solaris Bundled Driver: uhci
USB
Intel Corporation
82801H (ICH8 Family) USB UHCI Controller #5
Solaris Bundled Driver: ehci
Solaris Bundled Driver: ehci
USB
Intel Corporation
82801H (ICH8 Family) USB2 EHCI Controller #1
Solaris Bundled Driver: ehci
Solaris Bundled Driver: ehci
USB
Intel Corporation
82801H (ICH8 Family) USB2 EHCI Controller #2
[W] Solaris Bundled Driver: audiohd
[W] Solaris Bundled Driver: audiohd
Multimedia
Intel Corporation
82801H (ICH8 Family) HD Audio Controller
Solaris Bundled Driver: pci-ide
Solaris Bundled Driver: pci-ide
Storage
Intel Corporation
82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller
[W] Solaris Bundled Driver: vgatext
[W] Solaris Bundled Driver: vgatext
Video
Intel Corporation
Mobile GM965/GL960 Integrated Graphics Controller
Open Solaris Driver: wpi (Note-2)
Open Solaris Driver: wpi (Note-2)
Network
Intel Corporation
PRO/Wireless 3945ABG Network Connection
[W]: (1) No Dedicated Xorg Driver supporting Graphic Interface
(2) Driver support for indicated device not guaranteed
Note-1: http://www.broadcom.com/support/ethernet_nic/.
Note-2: http://opensolaris.org/os/community/laptop/wireless/wpi.

Error launching default browser

I had downloaded and installed the trial versions of PSE 12 and PRE 12 in late November, 2013. Purchased both December 23, 2013 and downloaded both. Did not realize I could just enter the new product codes, and instead re-installed both. All seems to working, but when I click HELP>SUPPORT, I get error message: There was an error launching the default browser. You may need to re-install the application and the Help component. Does this refer to reinstalling PSE and PRE or the browser which is IE9? Had a chat seesion with Mohammed who told me to contact tech support who want me to pay for help. This does not seem right for a new purchase.
Also, since the purchase occured on December 23, 2013 and today is January 3, 2014 I wonder why I am already getting emails that I have reached my limit in Revel. I thought I had thirty days for unlimited initial uploads.

is your issue resolved now?
~Surendra
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

Error launching Office Client when opening a BPF hyperlink

Version: BPC 10.1 NW Standard
When opening a BPF hyperlink, I am getting a pop up with error Error Launching Office Client: Object does not support property or method 'PushActionsbyValue'.
I have seen threads about this but no definite answer.
Please help if you know the fix

Hi David,
Please check the if Microsoft office installed is 64 bit and epm addin is 64 bit then the IE should be 64 bit.
we faced the same issue long ago user is using IE 32 bit while office and epm addin are 64 bits.
Thanks,
Dinesh.V

When I launch firefox on my wife's computer it comes up "Error Launching Brouser window : no XBL Binding for browser". What does this mean? How do I fix it?

On my wife's computer, when she tries to launch Firefox in order to connect to the internet, a window pops up that says "Error launching browser window: no XBL binding for the browser. How do I fix this? I am not very computer literate so please don't use too much computer lingo. Thanks for your help.

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
You have to close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

Error Launching LAUNCH.SH file

Getting following ERRORS LAUNCHING THE LAUNCH.SH FILE DURING PORTAL CONFIGURATION.
.\launch.sh[55]: s -1_1_1.jr:\jlib\help-3_1_8.jar:\jlib\smui -1_0_8.jar:\jlib\ice -4_06_6.jar:\jlib\share-1_0_8.jar:
NOT FOUND
null

Can someone please help me with this?
Thanks
null

Error launching Photoshop from Lightroom

I use Adobe Photoshop CC 2014 and Lightroom 5 from the Creative Cloud. After upgrading to Yosemite I am getting an error launching Photoshop from Lightroom. When I right click an image in Lightroom and select edit in Photoshop I get an error: "Some of the application components are missing from the Application directory, Please reinstall the application." I reinstalled Photoshop CC 2014 and I am still getting the error. Does anyone know how to fix this?

Uninstall Photoshop, Lightroom and the CC app, run the Adobe CC Cleaner tool, and re-install. Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Benjamin

Error launching Help in CS4

Just installed CS4 for the very first time as a new Photoshop user. Took the advice to do a standard install. Tried to run the Help functions and got the message "There was an error launching the Adobe Help functions.... may have to reinstall the application and the Help component "
Surely this cannot be right - using the standard install is for newcomers,who need to use the Help - right ? - Do I really have to de-activate/uninstall and do a CUSTOM install ?
Thanks

You are not alone, not that it's any consolation.
What language did you install?

Error: Couldn't open solaris/machines/conf003.rc

Hi:
Installing Solaris 8 Intel is a total nighmare. What a great difference with Red Hat 6.1 (which is practically plug&play)
After following all the installation steps over a complatible hardware intel platform (AMD k6, Samsung Ultra Ata 10gb, no network card), the configuration assistant stops in the first boot showing the following:
Running Configuration Assistant
error: Couldn't open solaris/machines/conf003.rc
The root filesystem is not mounted and the configuration assistant has exited prematurely. Booting is unlikely to succeed. CTL-ALT-DEL may be used to reset the machine.
Well, can anyone tell me what is going on? I can see the blue screen at the begining and i have 2 partitions (boot and solaris). I boot from the boot partition of course. AARRRGHHHHHH�� I NEED SOME HELP GUYS, i know i am a newby :-)

The missing file solaris/machines/conf003.rc seems to hint at a
corrupted saved configuration on the diskette. (You should find
three files conf003.{nam,rc,rf} in the solaris/machines subdirectory
on the DCA diskette). Using a fresh DCA
diskette might indeed help.
Another option is to try to install directly from cdrom - ignoring the
DCA floppy. If your
system can boot from the cdrom drive, try to boot using the
"Software 1 of 2" CD (or the "Installation" CD).

Error launching office client : Cannot run the macro 'RegisterEPMXIIFn'

Error launching office client : Cannot run the macro 'RegisterEPMXIIFn'
I've been receiving the above error since last week. I've adjusted the macro settings in excel and tried reinstalling the epm addin numerous times and up till now i haven't managed to get it resolved. Really need someone to help me on this. Whenever i check in excel, the epm add-in is already enabled. Please let me know how else can i get to resolve this.

Dear Rudy,
Indeed, could you please try the following suggestions:
In the Internet Explorer, go to : Tools->Internet Options-> Security->Custom Level, in section “Download”, check if the option “Automatic prompting for file downloads“ is enabled
In Excel, go to Excel Options-> Trust Center-> Trust Center Settings-> Macro Settings: check the
options “Disable all macros except digitally signed macros” and "Trust access to the VBA project object model"
Regards,
Siwar

Hotsync error: SystemMgr.c, Line:4038, Error Launching Application

When I try to hotsync, my plam displays this error message, and I must click "reset"- the screen goes blank, flashes the tungsten logo & music, and I set the date/time.
I have not lost the info on my palm- I just need to sync it into my new computer.
Please help!
Thank you in advance.
Post relates to: Tungsten E2

I am having exactly the same problem on my LifeDrive. The entire message I get when I try to HotSync is:
"A reset was caused on 11/30/06 at 1:09 am
while running "":
SystemMgr.c, Line:4038, error launching application"
I also noted that, if I try to access "Files" from the launch window it also causes a reset, with the following information:
"FileRegistry.c
line:833
can't open app DB"
I hope that this additional information might help in recognizing a correcting the problem

Error: Launch Plug-in Failed.

I had to reinstall windows 8.1 pro on my laptop. All my plug-ins were working just fine on PS CC and PSE13, now when I go to my plug-ins as before, I get and error: Launch Plug-in Failed. the program then closes?

Reinstalling the plug-ins solved the problem.

Error launching Integration Services Project in BIDS

A user has reported the following issue. Not sure how to help him:"Error launching Integration Services Project in BIDS Error launching Integration Services Project in BIDS I am receiving the error below when I try to create an integration services project in BIDS. I have tried manually registering the DTS.dll which is the only solution
I have been able to find in ~30mins of Google searching, to no avail."The application log shows a single warning:Visual Studio VsTemplate event ID 1One or more templates do not match any installed project packages.
Anyone seen this before?
This topic first appeared in the Spiceworks Community

Hi Anhlovevietnam,
According to the error message, it seems that the Analysis Services account lack permission to access ‘QLTICKET’. By default, the default account for AS services has only public permission to few databases. If you haven't change the AS services account,
or haven't grant the permission for this account, then you cannot deploy the AS project to server.
So in your scenario, ensure the service "SQL Server Analysis Services" is running with a proper Log On As user. This user should have administrator permission on Analysis Services and the proper permissions on the database engine. To avoid this issue, you
can grant the SELECT permission for the default account for AS services to data source DB. Or you can change the services account to this domain user who has the corresponding to the data source DB.
http://jetreportskb.host4kb.com/article/AA-00238
Regards,
Charlie Liao
Charlie Liao
TechNet Community Support

Error from debugger: Error launching remote program: security policy error

Hi all,
I bought yesterday the license for Iphone Developer, I'm programming
an app and would like to start testing it on my iPhone (EDGE, OS 2.1).
I'm using osx 10.5.5 on a MacBookPro, and latest SDK. Developing
and testing on simulator is ok, I followed all the procedure for requesting
certificates, downloading them, the provisioning file and dragged on
Xcode, I can see the iPhone with my provision name enabled for developing
in the Organizer view, and I followed instructions to configure Xcode to develop
on my device changing relevant options in the targets as explained online.
When I try to develop on device I get all the process, file is transferred
on device, but when launching I receive the error
Error from debugger: Error launching remote program: security policy error
Also when I try to launch the app from the phone it says there was
an error and it's not possible to lauch the app. Is that an error in my
steps configuring Xcode or is it something else?
Thanks,
Giancarlo

Never mind, I found it out, if you follow the exact guideline of apple, you will... get this error always
What you need is to make sure you have filled out the proper fields such as your bundle ID, although apple says it's auto-filled, it's not, in my case. you will need to change it from 'com.yourcompany....' to the one you set up on iphone dev site, such as 'com.toughgamer.testApp' in my case.

Error launching jdev9i on solaris

Similar Messages

Maybe you are looking for