Error launching Premier Pro after update

I am unable to launch PP. When it lauches I get an immediate error:
Premiere Pro has encountered an error.
[/sirreel64/releases/2013.02/shared/adobe/MediaCore/ASL/Foundation/Make/Mac/../../Src/Dire ctoryRegistry.cpp-283]
On brand new imac-27, latest os10
I've uninstalled and re-installed and continue to get error. All other CC Suite products launch just fine...

Please see if the advice here helps: http://premierepro.wikia.com/wiki/Error:DirectoryRegistry.cpp-283
Also, do you have a Documents folder at the standard location and does it contain the Adobe/Premiere Pro folder: /Users/<USERNAME>/Documents/Adobe/Premiere Pro. If so, is Premiere installed on the same partition as this Documents folder?

Similar Messages

Premier Pro CS6 Update error

Hi Forum,
This problem has hung around for months. I have spent days and days over many months trying to get a solution from Adobe but all efforts have failed.
THE ISSUE: When I attempt to update Premier Pro (Help/Updates ...) I get an error from Adobe saying "The Update Server is not responding or the internet firewall settings may be incorrect."
I am only running a software firewall (Bitdefender) and I am not getting any reports from it that an application is trying to open a port, nor can I see any attempt by an adobe server to communicate. In any case, I have uninstalled the firewall several times but still get the server error message. It seems plain the problem is at the Adobe end.
What can I do?
Does anyone know?

You can manually download and install the updates.
Windows.
http://www.adobe.com/support/downloads/product.jsp?product=98&platform=Windows
Mac
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5630

Launching premier pro CC2014 trial error

Every time I attempt to launch Premier Pro CC2014 Trial, I get the error message: [/ppro801/releases/2014.03/shared/adobe/MediaCore/ASL/Foundation/Src/DirectoryRegistry.cp p-283]
and application quits.
How can I overcome this problem.

From the screen shot shared by you it seems you are working on Windows XP which doesn't meet the minimum system requirement to run Premiere pro CS6.
Check :- http://www.adobe.com/products/premiere/tech-specs.edu.html

I now get an 500 Internal Server error when loading Firefox, after updating RealPlayer

I now get an 500 Internal Server error when loading Firefox, after updating RealPlayer.
When I try to open Firefox, it opens. But there is the error message.
What is this? How do I did rid of it?
'''bold text'''

Clear the cache and the cookies from sites that cause problems.
* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
You can also check the connection settings in Tools > Options > Advanced : Network : Connection<br />
If you do not need to use a proxy to connect to internet then select "No Proxy"
See "Firefox connection settings":
* [[Firefox cannot load websites but other programs can]]

Hey guys on my mac book pro after updating three apps wont leave my dock, when i close them they just re-appear they are "LoginServer", "USBServer" and "NetServer" any ideas to what is the issue?????? PLEASE HELP.

Hey guys on my mac book pro after updating three apps wont leave my dock, when i close them they just re-appear they are "LoginServer", "USBServer" and "NetServer" any ideas to what is the issue?????? PLEASE HELP.

Hi I have just got back from the apple store and the guy at the Genius bar looked at it and said it was a manufacturing fault, and because it has been like it since new, and seemed to be getting worse he replaced the computer and I have a new warranty from today.
We got the feeling as soon as he looked at it that he has seen this before, I did say to him I was concerned it would be a replacement screen and I was not really happy about that as it was so new, and he said that was the normal procedure, but as the fault was already there at new and it was getting worse they would replace. I could not have asked for a better service.
Not unpacked this one yet but am hoping all is good, its a great little machine.
Thank you for your responses, and I hope this might help someone else. One thing it did not seem to be missing pixels but something to do with the screen production?

I can't login (always crashed) in my MacBook pro after updated to lion. How can I do?

I can't login (always crashed) in my MacBook pro after updated to lion. How can I do?

already finished to reinstall. It's a little bit better now. But still not very stable, sometime crash in login screen, sometime crash when I was browsing. Do anybody can solve it?

Premier Pro, After Effects will not download, all other Apps available

Running Windows Vista, SP2, 32-bit, Mozilla Firefox latest updates.
At creative.adobe.com/apps, click on Pr or Ae "download." Neither download works.
The installation window for AAManager.exe pops up, ask to "Run" or cancel. Click on
"Run. It runs, initializes and AAM appears with 14 of 16 apps.
Installed a few Apps that are available. Prelude works fine after install. So, it appears to be App
specific.
Premier Pro and After Effects do not appear in AAM. Cannot install as a result.
Running a tight deadline. Appreciate help to quickly resolve this issue.
Zero error messages generated. Running CS Complete subscription service.

Yourrearipoff actually Mylenium is correct. I would recommend reviewing Not all apps displayed for download | Creative Cloud desktop app which discusses the need for a 64-bit OS as well as meeting the system requirements in order to download and install applications. A complete list of system requirements can be found at System requirements | Creative Cloud.

Error launching Premiere Pro CS6 due to non-capable video drivers

Premiere Pro not finding any capable video drivers. I am newly subscribed to the CS6 Creative Cloud and using a brand new Toshiba i7 windows laptop. When I try to launch Premiere Pro, I get the error message -" could not find any capable video display modules. Please update your video display drivers and start again." This is the only/first Adobe program that I have installed so far besides the Adobe Application Manager on this machine. I believe the i7 controller should be able to handle this. What next?

More hardware information needed... ESPECIALLY the brand/model graphics adapter in that laptop, and the driver version
Read http://forums.adobe.com/message/4200840
Also, some laptop information...
For effective HD video editing, a laptop with the following
-at least the Intel sandy bridge 2720 or 2820 quad processor
-1280x900 display with OpenGL 2.0-compatible graphics card
-and 8 or 16 gig ram and Win7 64bit Pro
-and 2 internal 7200 HDDs minimum
Does your graphics adapter "card or motherboard chip" and display match what I bolded?
Dual laptop video http://forums.adobe.com/thread/1001579
-Use BIOS http://forums.adobe.com/thread/1019004?tstart=0

Unable to launch Premier Pro 1.5

I have for the first time installed Premier Pro 1.5 on WIndows Vista version and cannot get it to work. What should be done? I use a Toshiba Satellite laptop computer. How do I also get the software plug-in to work?
Thanks.
K.O.

Welcome to the forum.
As Jeremy points out, it might not be possible, but then again, it might.
Let's go to the beginning. When you installed PrPro 1.5, did the installation go well? Any error messages?
If the installation went well, are you running as Administrator?
When you launch PrPro, you will get a Splash Screen. There is a tiny line of text that indicates what is loading. Does your launch get past the Splash Screen? If not, what is the last line of text (you have to look closely, as it is small)? It is likely that that is the module, .dll, etc., that is halting the launch. Or, it could be the next, the one that we do not see. Still, knowing the last line could be useful. If necessary, set up a video camera to record the Splash Screen and then play back the tape, pausing on the last entry in that line of text. This ARTICLE might be helpful, especially if you have any VST's installed on your system, say from an audio-editor.
Good luck, and let us know how it goes.
Hunt

Version 8 configure error when opening Itunes after updating to V8

I have contacted iTunes several times with no answer to this problem.
Everything was fine until I updated to Version 8, now every time I try and open iTunes it starts with a green bar stops about 3/4 along bar then says you need to restart to configure with Windows.
I restart then it does the same as before yes, DEJA VU.
This VERSION 8 is BUGGED I tell ya!
Any solutions would be appreciated before I delete this software and use something else!
Message was edited by: Version 8 bug
Message was edited by: Version 8 bug

I have a similar problem. After updating to version 8 (October 25, 2008) the itunes icon is plain and clicking it gives an error message (translated) like "This measure is only allowed for installed products".
So I fetch the iTunes801setup.exe and try to install it again by clicking the "Repair" button. It appears to do its' thing and asks me to restart the machine. OK, but after that it's the same again: "This measure is only allowed for installed products".
I don't want to lose all my music, can it be saved?
I guess that I will lose it if I remove iTunes and start all over.

Video signal lost on launch of iTunes (after "update")

I just (foolishly) "updated" to the most recent version of itunes. And, surprise surprise, a headache has ensued. I am using a mac mini hooked into a TV via HDMI (the setup is mac mini ---> receiver ---> TV). After the itunes update, Weirdly, when I launch itunes, the video signal gets lost. The application appears to start without any problems at first, but 10-20 seconds after launching, my TV goes black. I've never encountered a problem like this before (I've had my mini hooked to my TV in this setup for some time.) Any thoughts on how to try to address this issue would be greatly appreciated. (If only I had this computer on time machine, I would go back an hour and all my problems would be solved.)

I had the same problem after installing Snow Leopard.
But now it seems magically fixed after updating to 10.6.2

[Solved] 'New' error messages during init after updating initscripts

After updating to the latest initscripts, I got some error messages during init that I hadn't seen before. They occurred during one of the UDev steps, and were caused by an attempt to load an IDE module despite the controller being disabled. The controller shows up in Windows devmgr too, so I guess it's a failing of the mobo or BIOS.
In any case, I downgraded and found that the errors were nothing new. I'm just curious if the appearance of the errors during init was by design or a happy accident.
Last edited by alphaniner (2011-08-01 17:07:30)

alphaniner wrote:
karol wrote:If you have the new (i.e. current) initscripts, you should be fine:
http://projects.archlinux.org/initscrip … 328fbaf2e7
http://projects.archlinux.org/initscrip … 42dfeca8c2
I had never noticed the file before yesterday, actually. And I'm up-to-date, yet it's still full of 'em.
You need to reboot.
After you do, run
tail /var/log/boot
Mine isn't perfect, but I've already sent an e-mail to the dev (it's a matter of just a sed oneliner)
[karol@black ~]$ tail /var/log/boot
Tue Aug 2 05:03:01 2011: :: Setting Hostname: black ^[[171G [BUSY] ^[[171G [DONE]
Tue Aug 2 05:03:01 2011: :: Setting Locale: pl_PL.UTF-8 ^[[171G [BUSY] ^[[171G [DONE]
Tue Aug 2 05:03:01 2011: :: Setting Consoles to UTF-8 mode ^[[171G [BUSY] ^[[171G [DONE]
Tue Aug 2 05:03:01 2011: :: Loading Keyboard Map: pl ^[[171G [BUSY] ^[[171G [DONE]
Tue Aug 2 05:03:02 2011: :: Loading Console Font: Lat2-Terminus16 ^[[171G [BUSY] ^[[171G [DONE]
Tue Aug 2 05:03:02 2011: :: Saving dmesg Log ^[[171G [BUSY] ^[[171G [DONE]
Tue Aug 2 05:03:02 2011: INIT: Entering runlevel: 3
Tue Aug 2 05:03:02 2011: :: Starting Syslog-NG ^[[171G [BUSY] ^[[171G [DONE]
Tue Aug 2 05:03:03 2011: :: Starting D-BUS system messagebus ^[[171G [BUSY] ^[[171G [DONE]
Tue Aug 2 05:03:04 2011: :: Starting acpid ^[[171G [BKGD] :: Starting gpm ^[[171G [BKGD^[[0;1

Built in Audio not working in MacBook Pro after update to 10.7.3

The Built In Audio is not working in My MacBook Pro (Early 2011) after update to 10.7.3; I tried resetting the PRAM and SMC but it didn't helped me out. I can get audio only if i reboot my mac from Safe Mode or reboot after Repairing Disk Permissions in disk utility using the Recovery Partition;. If i make a normal restart or just startup then the built in audio disappers (audio is displayed gray in the menu bar) . Everything was working well with the 10.7.2
- Audio Works well with the Boot Camp Partition. and There is a sound during boot up.

I dont have any backups and i dont have time capsule or an external hard drive ready to be used for backup.
My macbook is my the only one computer. The problem is that the animation is lagging when i change the window to dashboard or safari or mail or another window. Inspite of this my macbook works well.
But 5 minutes ago, I noticed that if i run autocad on my mac- the lags go away!!!!

Intel RAID error in Device Manager after updating Intel Matrix Storage Console

The latest in my catalogue of problems arose after updating Intel Matrix Storage Console (IMSC) ...
Lost my RAID volume, but both drives were OK. However, IMSC seemed to be freezing, so I thought I'd install the latest version from Intel. Once installed, it gave me errors saying a plug in was not found, followed by messages saying that the SATA and RAID drivers were not installed. Device Manager thinks the drivers are OK, but the yellow triangle with the ! is shown against the Intel RAID driver. Tried un-installing and re-installing the controller, updating the drivers, different versions of IMSC and still get the yellow triangle with the !
I have been having trouble with the RAID0 set up for weeks so wonder if it has finally died? I'm out of ideas. Can anyone help?
This post gives more details of the history and PC configuration: https://forum-en.msi.com/index.php?topic=121960.0

Quote from: NovJoe on 23-March-09, 14:53:31
Why don't you want to follow up with your previous thread?
It'll be confusing when you started multiple threads linking to the issue.
Sorry, I haven't posted here much so I'm not familiar with the protocols. I just thought it would be less confusing to make this a separate issue. I linked them to avoid duplicating info on my config & h/w

Startup error when launching premier pro cc 2014

I am able to launch earlier versions of premiere pro on my mac, but newly downloaded premiere pro hangs at startup.

Without knowing what Mac exactly nobody can say anything. Either way, ask in the Premiere forum.
Mylenium

Error launching Premier Pro after update

Similar Messages

Maybe you are looking for