Error launching Robohelp HTML 6 (Build 099)

The following error message keeps appearing every time I
launch Robohelp 6. I'm completely new to this software and I'm
learning it myself (no training). Can someone please advise or help
me?
"Unable to register hhctrl.ocx, itiss.dll, HHActiveX.dll,
RelatedTopicControl.ocx, CloseWindow.ocx, Contents.ocx,
HHCTRLVersion.ocx, Index.ocx, Shortcut.ocx, Splash.ocx,
WinHelpTopic.ocx, KeywordSearch.ocx, ImageChoice.ocx, Helpdesk.ocx,
SeeAlso.ocx. If you experience any adverse behaviour, please make
sure you have sufficient rights and restart the program."

I suspect that you have installed it without admin rights
attached to your login.
If that is the case, get admin rights attached, uninstall and
reinstall.

Similar Messages

Get Error 5 when Launching RoboHelp HTML 9

I just installed RH9, on a Windows XP (SP3) system, and I'm getting an Error 5 message that simply says uninstall and reinstall when I try to open RoboHelp HTML. I can't open the program.
I previously had RHx5 which I uninstalled, prior to installing this. I've uninstalled and reinstalled several times with the same result. My system meets the basic system requirements. I have plenty of hard drive space and RAM (3GB). I also just installed the latest RH9.01 update. I can't open RoboHelp for Word either. No error message, it jus doesn't open. FYI, I'm using Word 2007.
I can't find much on this error in regards to RH9 in the Adobe KB. Any solutions?

Can you post an image of the error message you are getting and say whether it is the same regardless of whether it is the RH HTML or RH for Word application you are opening. Use the camera icon as shown below.
The fact that you have installed RoboHelp as part of the TCS shouldn't be an issue. Out of interest, do the other applications that are part of the suite launch OK? One other thing. Did you uninstall RHX5 completely before installing TCS3?
The RoboColum(n)
@robocolumn
Colum McAndrew

Problems launching Robohelp HTML

I use X5, but downloaded the trail version of 7. It worked
first of all, but now I cant get it to load. I click to run the
program (via shortcut and menu), the timer comes up for a split
second, then nothing. RoboHTML.exe starts in Task Manager - but
then closes)
I have tried switching off Norton, running the machine in
SAFE mode and reinstalling, but no joy.
RoboHELP for Word works fine. My machine is running XP
Any other suggestions?

My company had the same problem except we were using RoboHelp
6 prior to upgrading to RoboHelp 7. RoboHelp7 HTML would run the
first time you opened it. You could open a project and work, no
problem, but when you closed RoboHelp7 HTML it would never run
again. We uninstalled, reinstalled, talked with tech support at
RoboHelp who said they couldn't duplicate the problem. They had me
remove all old files, etc. Nothing worked. The only way we were
able to get RoboHelp 7 HTML working was to reimage my machine from
scratch!

Unhandled Win32 in RH8 RoboHelp HTML Project

When I Launch RoboHelp HTML Project File I get an unhandled exception win32 and the app closes. I saw thread posts for this in RH6 a couple years ago but I can't find anything for RH8.
Any thoughts?
-Tom

Hi Tom
Please take a moment and become familiar with the Before You Post topic. I just deleted a cross posted thread where you asked for help with the same issue in a different forum category.
Cheers... Rick

Error when launching Robohelp

Does anyone know what this error means? I get it when
launching robohelp right before the program opens.
"Unable to register hhctrl.ocx, itss.dll. If you experience
any adverse behavior, please make sure you have sufficient rights
and restart the program. You may need to have an administrator run
this program once to configure some components." (click OK to
continue)
After i click OK RoboHelp opens and appears to be functioning
correctly, but i want to make sure this is not a serious error
message before i continue working.
Thanks!

Welcome to our community
Are you by chance running RoboHelp X5 on Vista?
Cheers... Rick

Opening RoboHelp HTML ver. 9.0 Projects - Out of memory error

I have just updated to Technical Communication Suite 3 which includes RoboHelp HTML 9. I have installed all of the latest updates as of 6/20/2011. I am running Windows 7 Ultimate 64-bit OS, 6GB RAM. Note that I still have RoboHelp HTML 7 installed on the machine.
I can use all of the Technical Communication Suite applications (e.g., FrameMaker 10, PhotoShop CS5, etc) except RoboHelp 9.0. When I attempt to open any project (including the sample projects listed on the Starter screen, I receive the error:
"Unable to open the file c:\users\myname\Document\My RoboHelp Projects\Adobe RoboHelp 9\myprojectfolder\myprojectname\$rhvariable$.htm. Out of memory starting the editor services."
Please let me know if anyone has encountered this error and has resolved it.
Thanks!
Andrea

Hi Jeff,
I am getting this error message.

Error launching Query Builder

Immediately after supplying userid/password/database parameters when launching the Oracle Query Builder, the following error message is displayed:
OBE-15952: User privilege table not loaded
OBE-15950: No Query Builder tables--Database open/save is disabled
ORA-00942: table or view does not exist
What needs to be done to eliminate the messages?

hello,
query builder is no longer a supported product. however, you might want to try adding verbose=no to the commandline.
thanks,
ph.

My Robohelp html 8 project won't open after one warning and error message

I'm currently using Robohelp HTML 8 and when I open my project I first get the following message:
After I click OK, I get this error message:
The project won't open after that. When I look ate my files they seem to be intact even though the message says the folder is missing from
Your help is greatly appreciated.
Thank you,
Joy

Hi Joy
Unless I'm mistaken, K would be a network drive, no?
Unfortunately RoboHelp is only one of a host of applications that doesn't fare well if you try to make edits to a project while it resides on a network drive.
Try copying the project to your local C drive. Perhaps create a folder named Projects and copy your project to a folder named Primo Intranet inside that folder so it looks like this:
C:\Projects\Primo Intranet
Once you do this, try opening your project again and you will likely have better luck.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7, 8 or 9 within the day!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

Orientation error folio of html & indesign

I am getting the following error message
An error has occurred while launching the DPS App Builder application.
'landing' does not match the folio orientation intent. Layouts in articles must match the folio orientation intent.
http://help.adobe.com/en_US/digitalpubsuite/using/WS67cb9e293e2f1f60530cf39c12f5fcd6d46-80 00.html
the folio is a combination of html articles and indesign documents
And the indesign document is set at 1024 X 768

Your folio is set to both portrait and landscape. Do your InDesign-based articles have both portrait and landscape layouts? Also, because you have a dual-orientation folio, your HTML-based articles should not have an _h or _v suffix; they should be named something like index.html.

Error while generating HTML

Hi,
I have a design studio application I want to share publicly on BI Launch Pad for my company. The dashboard/application made in design studio works fine locally and on BI Platform public folder (through my login credentials).
However, when other people from the company try to view this DS application, it throws "Error while generating HTML"
The root cause is:
The initial exception which caused the request to fail was:
Index: 0, Size: 0
Any clue why such a thing might be happening?

What version of BI4x/patch?
Looks like this error has been shown before on older versions of the BI Platform - see Error HTML in Mobile BI App, not in local (version 1.4)

Is RoboHelp HTML 7 incompatible with Lotus Notes?

Has anyone noticed incompatibility between Lotus Notes mail
v6.1 and RoboHelp HTML v7.0? I've had LN installed for the lifetime
of this computer, ~3 yrs, and have worked with RH 7.0 for ~2 mns.
Just this week, I've had three instances of LN not opening after I
managed to crash RH. Rebooting worked the first time: the 2nd time,
I had to re-install LN; the 3rd time, rebooting worked.

Until Notes.6, I always suspected something was going on
between the two.
For many months, I haven't had any RH crashes I could blame
on LN.
If LN is doing any automatic stuff, try turning it off. Or,
as a test, close LN before you launch RH. Any crashes after that?
Automatic stuff means checking for new mail, alterting you
when new mail arrives, Calendar reminders, and so on.
I know, that's what LN is for, but you might find something
that always eluded me. For example, I turned off the new mail alert
long ago, but I can't prove a link.
Good luck.
Harvey
P.S. I should mention that sometimes I have LN and RH running
at the same time on one machine, but mostly I run them on separate
PCs. Still, I can't prove a link.

Error: Makepkg was unable to build kdenlive package

Another problem building kdenlive. Can anyone shed some light on the problem here, thanks
==>
==> kdenlive dependencies:
- mlt++ (already installed)
==> Continue the building of 'kdenlive'? [Y/n]
==> ----------------------------------------------
==>
==> Building and installing package
==> Making package: kdenlive 0.5_1-2 (Sun Aug 3 13:34:37 CEST 2008)
==> Checking Runtime Dependencies...
==> Checking Buildtime Dependencies...
==> Retrieving Sources...
-> Found kdenlive-0.5-1.tar.gz in build dir
-> Found kdenlive-0.5-gcc43.patch in build dir
==> Validating source files with md5sums...
kdenlive-0.5-1.tar.gz ... Passed
kdenlive-0.5-gcc43.patch ... Passed
==> Extracting Sources...
-> bsdtar -x -f kdenlive-0.5-1.tar.gz
==> Removing existing pkg/ directory...
==> Entering fakeroot environment...
==> Starting build()...
patching file kdenlive/docclipavfile.cpp
patching file kdenlive/docclipproject.cpp
patching file kdenlive/doccliptextfile.cpp
patching file kdenlive/docclipvirtual.cpp
patching file kdenlive/docsubclip.cpp
patching file kdenlive/dynamicToolTip.cpp
patching file kdenlive/effectdesc.cpp
patching file kdenlive/effectparamdialog.cpp
patching file kdenlive/kdenlive.cpp
patching file kdenlive/kmmrulerpanel.cpp
patching file kdenlive/kmmscreen.cpp
patching file kdenlive/krender.cpp
patching file kdenlive/kruler.cpp
patching file kdenlive/krulertimemodel.cpp
patching file kdenlive/ktimeline.cpp
patching file kdenlive/ktrackpanel.cpp
patching file kdenlive/ktrackview.cpp
*** automake (GNU automake) 1.10.1 found.
*** Creating acinclude.m4
make[1]: Entering directory `/tmp/yaourt-tmp-dan/aur-kdenlive/kdenlive/src/kdenlive-0.5'
make[1]: Leaving directory `/tmp/yaourt-tmp-dan/aur-kdenlive/kdenlive/src/kdenlive-0.5'
*** Creating list of subdirectories
make[1]: Entering directory `/tmp/yaourt-tmp-dan/aur-kdenlive/kdenlive/src/kdenlive-0.5'
cd . && make -f admin/Makefile.common subdirs
make[2]: Entering directory `/tmp/yaourt-tmp-dan/aur-kdenlive/kdenlive/src/kdenlive-0.5'
make[2]: Leaving directory `/tmp/yaourt-tmp-dan/aur-kdenlive/kdenlive/src/kdenlive-0.5'
make[1]: Leaving directory `/tmp/yaourt-tmp-dan/aur-kdenlive/kdenlive/src/kdenlive-0.5'
*** Creating configure.files
*** Creating configure.in
make[1]: Entering directory `/tmp/yaourt-tmp-dan/aur-kdenlive/kdenlive/src/kdenlive-0.5'
cd . && make -f admin/Makefile.common configure.in ;
make[2]: Entering directory `/tmp/yaourt-tmp-dan/aur-kdenlive/kdenlive/src/kdenlive-0.5'
make[2]: Leaving directory `/tmp/yaourt-tmp-dan/aur-kdenlive/kdenlive/src/kdenlive-0.5'
make[1]: Leaving directory `/tmp/yaourt-tmp-dan/aur-kdenlive/kdenlive/src/kdenlive-0.5'
*** Creating aclocal.m4
acinclude.m4:3699: the serial number must appear before any macro definition
acinclude.m4:3744: the serial number must appear before any macro definition
acinclude.m4:3789: the serial number must appear before any macro definition
acinclude.m4:5997: the serial number must appear before any macro definition
/usr/share/aclocal/smpeg.m4:13: warning: underquoted definition of AM_PATH_SMPEG
/usr/share/aclocal/smpeg.m4:13: run info '(automake)Extending aclocal'
/usr/share/aclocal/smpeg.m4:13: or see http://sources.redhat.com/automake/automake.html#Extending-aclocal
configure.in:54: warning: AC_CACHE_VAL(lt_prog_compiler_static_works, ...): suspicious cache-id, must contain _cv_ to be cached
../../lib/autoconf/general.m4:1973: AC_CACHE_VAL is expanded from...
../../lib/autoconf/general.m4:1993: AC_CACHE_CHECK is expanded from...
acinclude.m4:6583: AC_LIBTOOL_LINKER_OPTION is expanded from...
acinclude.m4:8443: _LT_AC_LANG_C_CONFIG is expanded from...
acinclude.m4:8442: AC_LIBTOOL_LANG_C_CONFIG is expanded from...
acinclude.m4:6067: AC_LIBTOOL_SETUP is expanded from...
acinclude.m4:6047: _AC_PROG_LIBTOOL is expanded from...
acinclude.m4:6012: AC_PROG_LIBTOOL is expanded from...
acinclude.m4:11781: AM_PROG_LIBTOOL is expanded from...
acinclude.m4:3472: KDE_PROG_LIBTOOL is expanded from...
configure.in:54: the top level
configure.in:54: warning: AC_CACHE_VAL(lt_prog_compiler_pic_works, ...): suspicious cache-id, must contain _cv_ to be cached
acinclude.m4:6540: AC_LIBTOOL_COMPILER_OPTION is expanded from...
acinclude.m4:10479: AC_LIBTOOL_PROG_COMPILER_PIC is expanded from...
configure.in:54: warning: AC_CACHE_VAL(lt_prog_compiler_pic_works_CXX, ...): suspicious cache-id, must contain _cv_ to be cached
acinclude.m4:8588: _LT_AC_LANG_CXX_CONFIG is expanded from...
acinclude.m4:8587: AC_LIBTOOL_LANG_CXX_CONFIG is expanded from...
acinclude.m4:7580: _LT_AC_TAGCONFIG is expanded from...
configure.in:54: warning: AC_CACHE_VAL(lt_prog_compiler_pic_works_F77, ...): suspicious cache-id, must contain _cv_ to be cached
acinclude.m4:9604: _LT_AC_LANG_F77_CONFIG is expanded from...
acinclude.m4:9603: AC_LIBTOOL_LANG_F77_CONFIG is expanded from...
configure.in:54: warning: AC_CACHE_VAL(lt_prog_compiler_pic_works_GCJ, ...): suspicious cache-id, must contain _cv_ to be cached
acinclude.m4:9704: _LT_AC_LANG_GCJ_CONFIG is expanded from...
acinclude.m4:9703: AC_LIBTOOL_LANG_GCJ_CONFIG is expanded from...
*** Creating configure
configure.in:54: warning: AC_CACHE_VAL(lt_prog_compiler_static_works, ...): suspicious cache-id, must contain _cv_ to be cached
../../lib/autoconf/general.m4:1973: AC_CACHE_VAL is expanded from...
../../lib/autoconf/general.m4:1993: AC_CACHE_CHECK is expanded from...
acinclude.m4:6583: AC_LIBTOOL_LINKER_OPTION is expanded from...
acinclude.m4:8443: _LT_AC_LANG_C_CONFIG is expanded from...
acinclude.m4:8442: AC_LIBTOOL_LANG_C_CONFIG is expanded from...
acinclude.m4:6067: AC_LIBTOOL_SETUP is expanded from...
acinclude.m4:6047: _AC_PROG_LIBTOOL is expanded from...
acinclude.m4:6012: AC_PROG_LIBTOOL is expanded from...
acinclude.m4:11781: AM_PROG_LIBTOOL is expanded from...
acinclude.m4:3472: KDE_PROG_LIBTOOL is expanded from...
configure.in:54: the top level
configure.in:54: warning: AC_CACHE_VAL(lt_prog_compiler_pic_works, ...): suspicious cache-id, must contain _cv_ to be cached
acinclude.m4:6540: AC_LIBTOOL_COMPILER_OPTION is expanded from...
acinclude.m4:10479: AC_LIBTOOL_PROG_COMPILER_PIC is expanded from...
configure.in:54: warning: AC_CACHE_VAL(lt_prog_compiler_pic_works_CXX, ...): suspicious cache-id, must contain _cv_ to be cached
acinclude.m4:8588: _LT_AC_LANG_CXX_CONFIG is expanded from...
acinclude.m4:8587: AC_LIBTOOL_LANG_CXX_CONFIG is expanded from...
acinclude.m4:7580: _LT_AC_TAGCONFIG is expanded from...
configure.in:54: warning: AC_CACHE_VAL(lt_prog_compiler_pic_works_F77, ...): suspicious cache-id, must contain _cv_ to be cached
acinclude.m4:9604: _LT_AC_LANG_F77_CONFIG is expanded from...
acinclude.m4:9603: AC_LIBTOOL_LANG_F77_CONFIG is expanded from...
configure.in:54: warning: AC_CACHE_VAL(lt_prog_compiler_pic_works_GCJ, ...): suspicious cache-id, must contain _cv_ to be cached
acinclude.m4:9704: _LT_AC_LANG_GCJ_CONFIG is expanded from...
acinclude.m4:9703: AC_LIBTOOL_LANG_GCJ_CONFIG is expanded from...
*** Creating config.h template
configure.in:54: warning: AC_CACHE_VAL(lt_prog_compiler_static_works, ...): suspicious cache-id, must contain _cv_ to be cached
../../lib/autoconf/general.m4:1973: AC_CACHE_VAL is expanded from...
../../lib/autoconf/general.m4:1993: AC_CACHE_CHECK is expanded from...
acinclude.m4:6583: AC_LIBTOOL_LINKER_OPTION is expanded from...
acinclude.m4:8443: _LT_AC_LANG_C_CONFIG is expanded from...
acinclude.m4:8442: AC_LIBTOOL_LANG_C_CONFIG is expanded from...
acinclude.m4:6067: AC_LIBTOOL_SETUP is expanded from...
acinclude.m4:6047: _AC_PROG_LIBTOOL is expanded from...
acinclude.m4:6012: AC_PROG_LIBTOOL is expanded from...
acinclude.m4:11781: AM_PROG_LIBTOOL is expanded from...
acinclude.m4:3472: KDE_PROG_LIBTOOL is expanded from...
configure.in:54: the top level
configure.in:54: warning: AC_CACHE_VAL(lt_prog_compiler_pic_works, ...): suspicious cache-id, must contain _cv_ to be cached
acinclude.m4:6540: AC_LIBTOOL_COMPILER_OPTION is expanded from...
acinclude.m4:10479: AC_LIBTOOL_PROG_COMPILER_PIC is expanded from...
configure.in:54: warning: AC_CACHE_VAL(lt_prog_compiler_pic_works_CXX, ...): suspicious cache-id, must contain _cv_ to be cached
acinclude.m4:8588: _LT_AC_LANG_CXX_CONFIG is expanded from...
acinclude.m4:8587: AC_LIBTOOL_LANG_CXX_CONFIG is expanded from...
acinclude.m4:7580: _LT_AC_TAGCONFIG is expanded from...
configure.in:54: warning: AC_CACHE_VAL(lt_prog_compiler_pic_works_F77, ...): suspicious cache-id, must contain _cv_ to be cached
acinclude.m4:9604: _LT_AC_LANG_F77_CONFIG is expanded from...
acinclude.m4:9603: AC_LIBTOOL_LANG_F77_CONFIG is expanded from...
configure.in:54: warning: AC_CACHE_VAL(lt_prog_compiler_pic_works_GCJ, ...): suspicious cache-id, must contain _cv_ to be cached
acinclude.m4:9704: _LT_AC_LANG_GCJ_CONFIG is expanded from...
acinclude.m4:9703: AC_LIBTOOL_LANG_GCJ_CONFIG is expanded from...
*** Creating Makefile templates
configure.in:54: warning: AC_CACHE_VAL(lt_prog_compiler_static_works, ...): suspicious cache-id, must contain _cv_ to be cached
../../lib/autoconf/general.m4:1973: AC_CACHE_VAL is expanded from...
../../lib/autoconf/general.m4:1993: AC_CACHE_CHECK is expanded from...
acinclude.m4:6583: AC_LIBTOOL_LINKER_OPTION is expanded from...
acinclude.m4:8443: _LT_AC_LANG_C_CONFIG is expanded from...
acinclude.m4:8442: AC_LIBTOOL_LANG_C_CONFIG is expanded from...
acinclude.m4:6067: AC_LIBTOOL_SETUP is expanded from...
acinclude.m4:6047: _AC_PROG_LIBTOOL is expanded from...
acinclude.m4:6012: AC_PROG_LIBTOOL is expanded from...
acinclude.m4:11781: AM_PROG_LIBTOOL is expanded from...
acinclude.m4:3472: KDE_PROG_LIBTOOL is expanded from...
configure.in:54: the top level
configure.in:54: warning: AC_CACHE_VAL(lt_prog_compiler_pic_works, ...): suspicious cache-id, must contain _cv_ to be cached
acinclude.m4:6540: AC_LIBTOOL_COMPILER_OPTION is expanded from...
acinclude.m4:10479: AC_LIBTOOL_PROG_COMPILER_PIC is expanded from...
configure.in:54: warning: AC_CACHE_VAL(lt_prog_compiler_pic_works_CXX, ...): suspicious cache-id, must contain _cv_ to be cached
acinclude.m4:8588: _LT_AC_LANG_CXX_CONFIG is expanded from...
acinclude.m4:8587: AC_LIBTOOL_LANG_CXX_CONFIG is expanded from...
acinclude.m4:7580: _LT_AC_TAGCONFIG is expanded from...
configure.in:54: warning: AC_CACHE_VAL(lt_prog_compiler_pic_works_F77, ...): suspicious cache-id, must contain _cv_ to be cached
acinclude.m4:9604: _LT_AC_LANG_F77_CONFIG is expanded from...
acinclude.m4:9603: AC_LIBTOOL_LANG_F77_CONFIG is expanded from...
configure.in:54: warning: AC_CACHE_VAL(lt_prog_compiler_pic_works_GCJ, ...): suspicious cache-id, must contain _cv_ to be cached
acinclude.m4:9704: _LT_AC_LANG_GCJ_CONFIG is expanded from...
acinclude.m4:9703: AC_LIBTOOL_LANG_GCJ_CONFIG is expanded from...
renderer/Makefile.am:4: compiling `kdenlive_renderer.c' with per-target flags requires `AM_PROG_CC_C_O' in `configure.in'
*** Postprocessing Makefile templates
*** Creating date/time stamp
*** Finished
Don't forget to run ./configure
If you haven't done so in a while, run ./configure --help
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking target system type... i686-pc-linux-gnu
checking for a BSD-compatible install... /bin/install -c
checking for -p flag to install... yes
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for kde-config... /opt/kde/bin/kde-config
checking where to install... /opt/kde (as requested)
checking for style of include used by make... GNU
checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking dependency style of gcc... gcc3
checking how to run the C preprocessor... gcc -E
checking for g++... g++
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking dependency style of g++... gcc3
checking whether gcc is blacklisted... no
checking whether g++ supports -Wmissing-format-attribute... yes
checking whether gcc supports -Wmissing-format-attribute... yes
checking whether g++ supports -Wundef... yes
checking whether g++ supports -Wno-long-long... yes
checking whether g++ supports -Wno-non-virtual-dtor... yes
checking whether g++ supports -fno-reorder-blocks... yes
checking whether g++ supports -fno-exceptions... yes
checking whether g++ supports -fno-check-new... yes
checking whether g++ supports -fno-common... yes
checking whether g++ supports -fexceptions... yes
checking whether system headers can cope with -O2 -fno-inline... irrelevant
checking how to run the C++ preprocessor... g++ -E
checking whether g++ supports -O0... yes
checking whether g++ supports -Wl,--no-undefined... yes
checking whether g++ supports -Wl,--allow-shlib-undefined... yes
not using lib directory suffix
checking for a sed that does not truncate output... /bin/sed
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for /usr/bin/ld option to reload object files... -r
checking for BSD-compatible nm... /usr/bin/nm -B
checking whether ln -s works... yes
checking how to recognise dependent libraries... pass_all
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking dlfcn.h usability... yes
checking dlfcn.h presence... yes
checking for dlfcn.h... yes
checking for g77... no
checking for xlf... no
checking for f77... no
checking for frt... no
checking for pgf77... no
checking for cf77... no
checking for fort77... no
checking for fl32... no
checking for af77... no
checking for xlf90... no
checking for f90... no
checking for pgf90... no
checking for pghpf... no
checking for epcf90... no
checking for gfortran... gfortran
checking whether we are using the GNU Fortran 77 compiler... yes
checking whether gfortran accepts -g... yes
checking the maximum length of command line arguments... 32768
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for objdir... .libs
checking for ar... ar
checking for ranlib... ranlib
checking for strip... strip
checking if gcc static flag works... yes
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC
checking if gcc PIC flag -fPIC works... yes
checking if gcc supports -c -o file.o... yes
checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking for shl_load... no
checking for shl_load in -ldld... no
checking for dlopen... no
checking for dlopen in -ldl... yes
checking whether a program can dlopen itself... yes
checking whether a statically linked program can dlopen itself... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... no
configure: creating libtool
appending configuration tag "CXX" to libtool
checking for ld used by g++... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes
checking for g++ option to produce PIC... -fPIC
checking if g++ PIC flag -fPIC works... yes
checking if g++ supports -c -o file.o... yes
checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking for shl_load... (cached) no
checking for shl_load in -ldld... (cached) no
checking for dlopen... (cached) no
checking for dlopen in -ldl... (cached) yes
checking whether a program can dlopen itself... (cached) yes
checking whether a statically linked program can dlopen itself... (cached) yes
appending configuration tag "F77" to libtool
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... no
checking for gfortran option to produce PIC... -fPIC
checking if gfortran PIC flag -fPIC works... yes
checking if gfortran supports -c -o file.o... yes
checking whether the gfortran linker (/usr/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking for msgfmt... /usr/bin/msgfmt
checking for gmsgfmt... /usr/bin/msgfmt
checking for xgettext... /usr/bin/xgettext
checking if C++ programs can be compiled... yes
checking for strlcat... no
checking if strlcat needs custom prototype... yes - in libkdefakes
checking for strlcpy... no
checking if strlcpy needs custom prototype... yes - in libkdefakes
checking for main in -lutil... yes
checking for main in -lcompat... no
checking for crypt in -lcrypt... yes
checking for socklen_t... yes
checking for dnet_ntoa in -ldnet... no
checking for dnet_ntoa in -ldnet_stub... no
checking for inet_ntoa... yes
checking for connect... yes
checking for remove... yes
checking for shmat... yes
checking for sys/types.h... (cached) yes
checking for stdint.h... (cached) yes
checking sys/bitypes.h usability... yes
checking sys/bitypes.h presence... yes
checking for sys/bitypes.h... yes
checking for poll in -lpoll... no
checking Carbon/Carbon.h usability... no
checking Carbon/Carbon.h presence... no
checking for Carbon/Carbon.h... no
checking CoreAudio/CoreAudio.h usability... no
checking CoreAudio/CoreAudio.h presence... no
checking for CoreAudio/CoreAudio.h... no
checking if res_init needs -lresolv... yes
checking for res_init... yes
checking if res_init needs custom prototype... no
checking for killpg in -lucb... no
checking size of int... 4
checking size of short... 2
checking size of long... 4
checking size of char *... 4
checking for dlopen in -ldl... (cached) yes
checking for shl_unload in -ldld... no
checking size of size_t... 4
checking size of unsigned long... 4
checking sizeof size_t == sizeof unsigned long... yes
checking for PIE support... yes
checking if enabling -pie/fPIE support... yes
checking crt_externs.h usability... no
checking crt_externs.h presence... no
checking for crt_externs.h... no
checking for _NSGetEnviron... no
checking for vsnprintf... yes
checking for snprintf... yes
checking for X... libraries /usr/lib, headers .
checking for IceConnectionNumber in -lICE... yes
checking for libXext... yes
checking for pthread_create in -lpthread... yes
checking for extra includes... no
checking for extra libs... no
checking for libz... -lz
checking for libpng... -lpng -lz -lm
checking for libjpeg6b... no
checking for libjpeg... -ljpeg
checking for perl... /usr/bin/perl
checking for Qt... libraries /opt/qt/lib, headers /opt/qt/include using -mt
checking for moc... /opt/qt/bin/moc
checking for uic... /opt/qt/bin/uic
checking whether uic supports -L ... yes
checking whether uic supports -nounload ... yes
checking if Qt needs -ljpeg... no
checking for rpath... yes
checking for KDE... libraries /opt/kde/lib, headers /opt/kde/include
checking if UIC has KDE plugins available... yes
checking for KDE paths... defaults
checking for dcopidl... /opt/kde/bin/dcopidl
checking for dcopidl2cpp... /opt/kde/bin/dcopidl2cpp
checking for mcopidl... /opt/kde/bin/mcopidl
checking for artsc-config... /opt/kde/bin/artsc-config
checking for meinproc... /opt/kde/bin/meinproc
checking for kconfig_compiler... /opt/kde/bin/kconfig_compiler
checking for dcopidlng... /opt/kde/bin/dcopidlng
checking for xmllint... /usr/bin/xmllint
checking whether byte ordering is bigendian... no
checking for MAXPATHLEN... 4096
checking for mlt-config... /usr/bin/mlt-config
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for LIBIEC61883... yes
checking libavc1394/avc1394.h usability... yes
checking libavc1394/avc1394.h presence... yes
checking for libavc1394/avc1394.h... yes
configure: creating ./config.status
wrong input (flag != 4) at admin/conf.change.pl line 117, <> line 966.
config.status: creating config.h
config.status: config.h is unchanged
config.status: executing depfiles commands
checking if doc should be compiled... yes
checking if graphics should be compiled... yes
checking if icons should be compiled... yes
checking if kdenlive should be compiled... yes
checking if pgm should be compiled... yes
checking if po should be compiled... yes
checking if profiles should be compiled... yes
checking if renderer should be compiled... yes
configure: creating ./config.status
wrong input (flag != 4) at admin/conf.change.pl line 117, <> line 1397.
config.status: creating Makefile
config.status: creating doc/Makefile
config.status: creating doc/de/Makefile
config.status: creating doc/en/Makefile
config.status: creating doc/fr/Makefile
config.status: creating doc/it/Makefile
config.status: creating graphics/Makefile
config.status: creating icons/Makefile
config.status: creating icons/hicolor/Makefile
config.status: creating icons/hicolor/22x22/Makefile
config.status: creating icons/hicolor/22x22/actions/Makefile
config.status: creating icons/hicolor/32x32/Makefile
config.status: creating icons/hicolor/32x32/actions/Makefile
config.status: creating kdenlive/Makefile
config.status: creating pgm/Makefile
config.status: creating pgm/PAL/Makefile
config.status: creating po/Makefile
config.status: creating profiles/Makefile
config.status: creating renderer/Makefile
config.status: creating config.h
config.status: config.h is unchanged
config.status: executing depfiles commands
Good - your configure finished. Start make now
make all-recursive
make[1]: Entering directory `/tmp/yaourt-tmp-dan/aur-kdenlive/kdenlive/src/kdenlive-0.5'
Making all in doc
make[2]: Entering directory `/tmp/yaourt-tmp-dan/aur-kdenlive/kdenlive/src/kdenlive-0.5/doc'
Making all in .
make[3]: Entering directory `/tmp/yaourt-tmp-dan/aur-kdenlive/kdenlive/src/kdenlive-0.5/doc'
make[3]: Nothing to be done for `all-am'.
make[3]: Leaving directory `/tmp/yaourt-tmp-dan/aur-kdenlive/kdenlive/src/kdenlive-0.5/doc'
Making all in fr
make[3]: Entering directory `/tmp/yaourt-tmp-dan/aur-kdenlive/kdenlive/src/kdenlive-0.5/doc/fr'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/tmp/yaourt-tmp-dan/aur-kdenlive/kdenlive/src/kdenlive-0.5/doc/fr'
Making all in en
make[3]: Entering directory `/tmp/yaourt-tmp-dan/aur-kdenlive/kdenlive/src/kdenlive-0.5/doc/en'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/tmp/yaourt-tmp-dan/aur-kdenlive/kdenlive/src/kdenlive-0.5/doc/en'
Making all in de
make[3]: Entering directory `/tmp/yaourt-tmp-dan/aur-kdenlive/kdenlive/src/kdenlive-0.5/doc/de'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/tmp/yaourt-tmp-dan/aur-kdenlive/kdenlive/src/kdenlive-0.5/doc/de'
Making all in it
make[3]: Entering directory `/tmp/yaourt-tmp-dan/aur-kdenlive/kdenlive/src/kdenlive-0.5/doc/it'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/tmp/yaourt-tmp-dan/aur-kdenlive/kdenlive/src/kdenlive-0.5/doc/it'
make[2]: Leaving directory `/tmp/yaourt-tmp-dan/aur-kdenlive/kdenlive/src/kdenlive-0.5/doc'
Making all in graphics
make[2]: Entering directory `/tmp/yaourt-tmp-dan/aur-kdenlive/kdenlive/src/kdenlive-0.5/graphics'
make[2]: Nothing to be done for `all'.
make[2]: Leaving directory `/tmp/yaourt-tmp-dan/aur-kdenlive/kdenlive/src/kdenlive-0.5/graphics'
Making all in icons
make[2]: Entering directory `/tmp/yaourt-tmp-dan/aur-kdenlive/kdenlive/src/kdenlive-0.5/icons'
Making all in hicolor
make[3]: Entering directory `/tmp/yaourt-tmp-dan/aur-kdenlive/kdenlive/src/kdenlive-0.5/icons/hicolor'
Making all in 32x32
make[4]: Entering directory `/tmp/yaourt-tmp-dan/aur-kdenlive/kdenlive/src/kdenlive-0.5/icons/hicolor/32x32'
Making all in actions
make[5]: Entering directory `/tmp/yaourt-tmp-dan/aur-kdenlive/kdenlive/src/kdenlive-0.5/icons/hicolor/32x32/actions'
make[5]: Nothing to be done for `all'.
make[5]: Leaving directory `/tmp/yaourt-tmp-dan/aur-kdenlive/kdenlive/src/kdenlive-0.5/icons/hicolor/32x32/actions'
make[5]: Entering directory `/tmp/yaourt-tmp-dan/aur-kdenlive/kdenlive/src/kdenlive-0.5/icons/hicolor/32x32'
make[5]: Nothing to be done for `all-am'.
make[5]: Leaving directory `/tmp/yaourt-tmp-dan/aur-kdenlive/kdenlive/src/kdenlive-0.5/icons/hicolor/32x32'
make[4]: Leaving directory `/tmp/yaourt-tmp-dan/aur-kdenlive/kdenlive/src/kdenlive-0.5/icons/hicolor/32x32'
Making all in 22x22
make[4]: Entering directory `/tmp/yaourt-tmp-dan/aur-kdenlive/kdenlive/src/kdenlive-0.5/icons/hicolor/22x22'
Making all in actions
make[5]: Entering directory `/tmp/yaourt-tmp-dan/aur-kdenlive/kdenlive/src/kdenlive-0.5/icons/hicolor/22x22/actions'
make[5]: Nothing to be done for `all'.
make[5]: Leaving directory `/tmp/yaourt-tmp-dan/aur-kdenlive/kdenlive/src/kdenlive-0.5/icons/hicolor/22x22/actions'
make[5]: Entering directory `/tmp/yaourt-tmp-dan/aur-kdenlive/kdenlive/src/kdenlive-0.5/icons/hicolor/22x22'
make[5]: Nothing to be done for `all-am'.
make[5]: Leaving directory `/tmp/yaourt-tmp-dan/aur-kdenlive/kdenlive/src/kdenlive-0.5/icons/hicolor/22x22'
make[4]: Leaving directory `/tmp/yaourt-tmp-dan/aur-kdenlive/kdenlive/src/kdenlive-0.5/icons/hicolor/22x22'
make[4]: Entering directory `/tmp/yaourt-tmp-dan/aur-kdenlive/kdenlive/src/kdenlive-0.5/icons/hicolor'
make[4]: Nothing to be done for `all-am'.
make[4]: Leaving directory `/tmp/yaourt-tmp-dan/aur-kdenlive/kdenlive/src/kdenlive-0.5/icons/hicolor'
make[3]: Leaving directory `/tmp/yaourt-tmp-dan/aur-kdenlive/kdenlive/src/kdenlive-0.5/icons/hicolor'
make[3]: Entering directory `/tmp/yaourt-tmp-dan/aur-kdenlive/kdenlive/src/kdenlive-0.5/icons'
make[3]: Nothing to be done for `all-am'.
make[3]: Leaving directory `/tmp/yaourt-tmp-dan/aur-kdenlive/kdenlive/src/kdenlive-0.5/icons'
make[2]: Leaving directory `/tmp/yaourt-tmp-dan/aur-kdenlive/kdenlive/src/kdenlive-0.5/icons'
Making all in kdenlive
make[2]: Entering directory `/tmp/yaourt-tmp-dan/aur-kdenlive/kdenlive/src/kdenlive-0.5/kdenlive'
g++ -DHAVE_CONFIG_H -I. -I.. -I/opt/kde/include -I/opt/qt/include -I. -I/usr/include -I/usr/include/mlt -D_REENTRANT -D__STDC_CONSTANT_MACROS -DQT_THREAD_SUPPORT -D_REENTRANT -Wno-long-long -Wundef -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wchar-subscripts -Wall -W -Wpointer-arith -O2 -march=i686 -mtune=generic -O2 -pipe -Wformat-security -Wmissing-format-attribute -Wno-non-virtual-dtor -fno-exceptions -fno-check-new -fno-common -DMLT_PREFIX=\""/usr"\" -DENABLE_FIREWIRE -MT docclipavfile.o -MD -MP -MF .deps/docclipavfile.Tpo -c -o docclipavfile.o docclipavfile.cpp
In file included from docclipref.h:37,
from clipmanager.h:32,
from docclipavfile.cpp:30:
effectstack.h:39: warning: type qualifiers ignored on function return type
docclipavfile.h: In constructor 'DocClipAVFile::DocClipAVFile(const QString&, const KURL&, uint)':
docclipavfile.h:212: warning: 'DocClipAVFile::m_ttl' will be initialized after
docclipavfile.h:197: warning: 'bool DocClipAVFile::m_hasCrossfade'
docclipavfile.cpp:37: warning: when initialized here
docclipavfile.h: In constructor 'DocClipAVFile::DocClipAVFile(const QString&, const GenTime&, uint)':
docclipavfile.h:197: warning: 'DocClipAVFile::m_hasCrossfade' will be initialized after
docclipavfile.h:182: warning: 'bool DocClipAVFile::m_durationKnown'
docclipavfile.cpp:49: warning: when initialized here
docclipavfile.h: In constructor 'DocClipAVFile::DocClipAVFile(const KURL&, const GenTime&, bool, uint)':
docclipavfile.h:197: warning: 'DocClipAVFile::m_hasCrossfade' will be initialized after
docclipavfile.h:180: warning: 'KURL DocClipAVFile::m_url'
docclipavfile.cpp:60: warning: when initialized here
docclipavfile.h: In constructor 'DocClipAVFile::DocClipAVFile(const KURL&, const QString&, const int&, const GenTime&, bool, bool, const QString&, double, uint, uint)':
docclipavfile.h:216: warning: 'DocClipAVFile::m_lumaduration' will be initialized after
docclipavfile.h:184: warning: 'double DocClipAVFile::m_framesPerSecond'
docclipavfile.cpp:77: warning: when initialized here
docclipavfile.cpp: At global scope:
docclipavfile.cpp:77: warning: unused parameter 'extension'
docclipavfile.h: In constructor 'DocClipAVFile::DocClipAVFile(const KURL&)':
docclipavfile.h:197: warning: 'DocClipAVFile::m_hasCrossfade' will be initialized after
docclipavfile.h:182: warning: 'bool DocClipAVFile::m_durationKnown'
docclipavfile.cpp:92: warning: when initialized here
docclipavfile.cpp: At global scope:
docclipavfile.cpp:421: warning: unused parameter 'startTime'
docclipavfile.cpp:421: warning: unused parameter 'endTime'
docclipavfile.cpp: In member function 'virtual QDomDocument DocClipAVFile::sceneToXML(const GenTime&, const GenTime&) const':
docclipavfile.cpp:423: warning: control reaches end of non-void function
mv -f .deps/docclipavfile.Tpo .deps/docclipavfile.Po
g++ -DHAVE_CONFIG_H -I. -I.. -I/opt/kde/include -I/opt/qt/include -I. -I/usr/include -I/usr/include/mlt -D_REENTRANT -D__STDC_CONSTANT_MACROS -DQT_THREAD_SUPPORT -D_REENTRANT -Wno-long-long -Wundef -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wchar-subscripts -Wall -W -Wpointer-arith -O2 -march=i686 -mtune=generic -O2 -pipe -Wformat-security -Wmissing-format-attribute -Wno-non-virtual-dtor -fno-exceptions -fno-check-new -fno-common -DMLT_PREFIX=\""/usr"\" -DENABLE_FIREWIRE -MT docclipproject.o -MD -MP -MF .deps/docclipproject.Tpo -c -o docclipproject.o docclipproject.cpp
docclipproject.cpp:909:3: warning: #warning "this line might be the cause of significant trouble"
In file included from docclipref.h:37,
from docclipproject.h:22,
from docclipproject.cpp:18:
effectstack.h:39: warning: type qualifiers ignored on function return type
In file included from docclipproject.cpp:18:
docclipproject.h:53: warning: type qualifiers ignored on function return type
docclipproject.h:54: warning: type qualifiers ignored on function return type
docclipproject.cpp: In member function 'void DocClipProject::slotAddTrack(DocTrackBase*, int)':
docclipproject.cpp:98: warning: comparison between signed and unsigned integer expressions
docclipproject.cpp: In member function 'void DocClipProject::slotDeleteTrack(int)':
docclipproject.cpp:121: warning: comparison between signed and unsigned integer expressions
docclipproject.cpp: In member function 'virtual const DocClipBase::CLIPTYPE& DocClipProject::clipType() const':
docclipproject.cpp:728: warning: returning reference to temporary
mv -f .deps/docclipproject.Tpo .deps/docclipproject.Po
g++ -DHAVE_CONFIG_H -I. -I.. -I/opt/kde/include -I/opt/qt/include -I. -I/usr/include -I/usr/include/mlt -D_REENTRANT -D__STDC_CONSTANT_MACROS -DQT_THREAD_SUPPORT -D_REENTRANT -Wno-long-long -Wundef -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wchar-subscripts -Wall -W -Wpointer-arith -O2 -march=i686 -mtune=generic -O2 -pipe -Wformat-security -Wmissing-format-attribute -Wno-non-virtual-dtor -fno-exceptions -fno-check-new -fno-common -DMLT_PREFIX=\""/usr"\" -DENABLE_FIREWIRE -MT doccliptextfile.o -MD -MP -MF .deps/doccliptextfile.Tpo -c -o doccliptextfile.o doccliptextfile.cpp
doccliptextfile.cpp:273:2: warning: #warning TODO - write this funtion.
In file included from docclipref.h:37,
from clipmanager.h:32,
from doccliptextfile.cpp:30:
effectstack.h:39: warning: type qualifiers ignored on function return type
doccliptextfile.cpp: In member function 'virtual void DocClipTextFile::removeTmpFile() const':
doccliptextfile.cpp:111: warning: 'static bool KIO::NetAccess::del(const KURL&)' is deprecated (declared at /opt/kde/include/kio/netaccess.h:347)
doccliptextfile.cpp: At global scope:
doccliptextfile.cpp:150: warning: unused parameter 'element'
doccliptextfile.cpp:212: warning: unused parameter 'startTime'
doccliptextfile.cpp:212: warning: unused parameter 'endTime'
doccliptextfile.cpp: In member function 'uint DocClipTextFile::numReferences() const':
doccliptextfile.cpp:274: warning: control reaches end of non-void function
doccliptextfile.cpp: In member function 'virtual QDomDocument DocClipTextFile::sceneToXML(const GenTime&, const GenTime&) const':
doccliptextfile.cpp:214: warning: control reaches end of non-void function
doccliptextfile.cpp: In static member function 'static DocClipTextFile* DocClipTextFile::createClip(QDomElement)':
doccliptextfile.cpp:165: warning: control reaches end of non-void function
mv -f .deps/doccliptextfile.Tpo .deps/doccliptextfile.Po
g++ -DHAVE_CONFIG_H -I. -I.. -I/opt/kde/include -I/opt/qt/include -I. -I/usr/include -I/usr/include/mlt -D_REENTRANT -D__STDC_CONSTANT_MACROS -DQT_THREAD_SUPPORT -D_REENTRANT -Wno-long-long -Wundef -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wchar-subscripts -Wall -W -Wpointer-arith -O2 -march=i686 -mtune=generic -O2 -pipe -Wformat-security -Wmissing-format-attribute -Wno-non-virtual-dtor -fno-exceptions -fno-check-new -fno-common -DMLT_PREFIX=\""/usr"\" -DENABLE_FIREWIRE -MT docclipvirtual.o -MD -MP -MF .deps/docclipvirtual.Tpo -c -o docclipvirtual.o docclipvirtual.cpp
docclipvirtual.cpp:186:2: warning: #warning TODO - write this funtion.
In file included from docclipref.h:37,
from clipmanager.h:32,
from docclipvirtual.cpp:30:
effectstack.h:39: warning: type qualifiers ignored on function return type
docclipvirtual.h: In constructor 'DocClipVirtual::DocClipVirtual(const KURL&, const QString&, const QString&, GenTime, GenTime, uint)':
docclipvirtual.h:138: warning: 'DocClipVirtual::m_end' will be initialized after
docclipvirtual.h:128: warning: 'DocClipBase::CLIPTYPE DocClipVirtual::m_clipType'
docclipvirtual.cpp:34: warning: when initialized here
docclipvirtual.cpp: In member function 'virtual void DocClipVirtual::removeTmpFile() const':
docclipvirtual.cpp:85: warning: 'static bool KIO::NetAccess::del(const KURL&)' is deprecated (declared at /opt/kde/include/kio/netaccess.h:347)
docclipvirtual.cpp: At global scope:
docclipvirtual.cpp:105: warning: unused parameter 'element'
docclipvirtual.cpp:133: warning: unused parameter 'startTime'
docclipvirtual.cpp:133: warning: unused parameter 'endTime'
docclipvirtual.cpp: In member function 'uint DocClipVirtual::numReferences() const':
docclipvirtual.cpp:187: warning: control reaches end of non-void function
docclipvirtual.cpp: In member function 'virtual QDomDocument DocClipVirtual::sceneToXML(const GenTime&, const GenTime&) const':
docclipvirtual.cpp:135: warning: control reaches end of non-void function
docclipvirtual.cpp: In static member function 'static DocClipVirtual* DocClipVirtual::createClip(QDomElement)':
docclipvirtual.cpp:107: warning: control reaches end of non-void function
mv -f .deps/docclipvirtual.Tpo .deps/docclipvirtual.Po
g++ -DHAVE_CONFIG_H -I. -I.. -I/opt/kde/include -I/opt/qt/include -I. -I/usr/include -I/usr/include/mlt -D_REENTRANT -D__STDC_CONSTANT_MACROS -DQT_THREAD_SUPPORT -D_REENTRANT -Wno-long-long -Wundef -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wchar-subscripts -Wall -W -Wpointer-arith -O2 -march=i686 -mtune=generic -O2 -pipe -Wformat-security -Wmissing-format-attribute -Wno-non-virtual-dtor -fno-exceptions -fno-check-new -fno-common -DMLT_PREFIX=\""/usr"\" -DENABLE_FIREWIRE -MT docsubclip.o -MD -MP -MF .deps/docsubclip.Tpo -c -o docsubclip.o docsubclip.cpp
docsubclip.cpp:82:2: warning: #warning - needs writing.
docsubclip.cpp:129:2: warning: #warning - need to re-add in/out points correctly.
docsubclip.cpp:149:3: warning: #warning - needs to be written
In file included from docclipref.h:37,
from docclipreflist.h:22,
from doctrackbase.h:24,
from doctrackbaselist.h:23,
from kdenlivedoc.h:32,
from docsubclip.cpp:19:
effectstack.h:39: warning: type qualifiers ignored on function return type
docsubclip.cpp:26: warning: unused parameter 'doc'
docsubclip.cpp:80: warning: unused parameter 'doc'
docsubclip.cpp:80: warning: unused parameter 'element'
docsubclip.cpp:127: warning: unused parameter 'startTime'
docsubclip.cpp:127: warning: unused parameter 'endTime'
docsubclip.cpp:142: warning: unused parameter 'toPopulate'
docsubclip.cpp:147: warning: unused parameter 'element'
mv -f .deps/docsubclip.Tpo .deps/docsubclip.Po
g++ -DHAVE_CONFIG_H -I. -I.. -I/opt/kde/include -I/opt/qt/include -I. -I/usr/include -I/usr/include/mlt -D_REENTRANT -D__STDC_CONSTANT_MACROS -DQT_THREAD_SUPPORT -D_REENTRANT -Wno-long-long -Wundef -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wchar-subscripts -Wall -W -Wpointer-arith -O2 -march=i686 -mtune=generic -O2 -pipe -Wformat-security -Wmissing-format-attribute -Wno-non-virtual-dtor -fno-exceptions -fno-check-new -fno-common -DMLT_PREFIX=\""/usr"\" -DENABLE_FIREWIRE -MT dynamicToolTip.o -MD -MP -MF .deps/dynamicToolTip.Tpo -c -o dynamicToolTip.o dynamicToolTip.cpp
In file included from docclipref.h:37,
from docclipreflist.h:22,
from doctrackbase.h:24,
from kmmtrackpanel.h:27,
from dynamicToolTip.cpp:24:
effectstack.h:39: warning: type qualifiers ignored on function return type
kruler.h:31: warning: '<unnamed>::g_scrollTimerDelay' defined but not used
kruler.h:32: warning: '<unnamed>::g_scrollThreshold' defined but not used
mv -f .deps/dynamicToolTip.Tpo .deps/dynamicToolTip.Po
g++ -DHAVE_CONFIG_H -I. -I.. -I/opt/kde/include -I/opt/qt/include -I. -I/usr/include -I/usr/include/mlt -D_REENTRANT -D__STDC_CONSTANT_MACROS -DQT_THREAD_SUPPORT -D_REENTRANT -Wno-long-long -Wundef -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wchar-subscripts -Wall -W -Wpointer-arith -O2 -march=i686 -mtune=generic -O2 -pipe -Wformat-security -Wmissing-format-attribute -Wno-non-virtual-dtor -fno-exceptions -fno-check-new -fno-common -DMLT_PREFIX=\""/usr"\" -DENABLE_FIREWIRE -MT effectdesc.o -MD -MP -MF .deps/effectdesc.Tpo -c -o effectdesc.o effectdesc.cpp
In file included from effectdesc.cpp:24:
effectparamdesc.h:99: warning: type qualifiers ignored on function return type
effectdesc.cpp:69: warning: unused parameter 'name'
effectdesc.cpp:69: warning: unused parameter 'video'
effectdesc.cpp:69: warning: unused parameter 'audio'
mv -f .deps/effectdesc.Tpo .deps/effectdesc.Po
g++ -DHAVE_CONFIG_H -I. -I.. -I/opt/kde/include -I/opt/qt/include -I. -I/usr/include -I/usr/include/mlt -D_REENTRANT -D__STDC_CONSTANT_MACROS -DQT_THREAD_SUPPORT -D_REENTRANT -Wno-long-long -Wundef -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wchar-subscripts -Wall -W -Wpointer-arith -O2 -march=i686 -mtune=generic -O2 -pipe -Wformat-security -Wmissing-format-attribute -Wno-non-virtual-dtor -fno-exceptions -fno-check-new -fno-common -DMLT_PREFIX=\""/usr"\" -DENABLE_FIREWIRE -MT effectparamdialog.o -MD -MP -MF .deps/effectparamdialog.Tpo -c -o effectparamdialog.o effectparamdialog.cpp
In file included from ./docclipref.h:37,
from ./docclipreflist.h:22,
from ./doctrackbase.h:24,
from ./kmmtrackpanel.h:27,
from effectparamdialog.cpp:34:
./effectstack.h:39: warning: type qualifiers ignored on function return type
In file included from effectparamdialog.cpp:36:
effectparamdesc.h:99: warning: type qualifiers ignored on function return type
./kruler.h:31: warning: '<unnamed>::g_scrollTimerDelay' defined but not used
./kruler.h:32: warning: '<unnamed>::g_scrollThreshold' defined but not used
mv -f .deps/effectparamdialog.Tpo .deps/effectparamdialog.Po
g++ -DHAVE_CONFIG_H -I. -I.. -I/opt/kde/include -I/opt/qt/include -I. -I/usr/include -I/usr/include/mlt -D_REENTRANT -D__STDC_CONSTANT_MACROS -DQT_THREAD_SUPPORT -D_REENTRANT -Wno-long-long -Wundef -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wchar-subscripts -Wall -W -Wpointer-arith -O2 -march=i686 -mtune=generic -O2 -pipe -Wformat-security -Wmissing-format-attribute -Wno-non-virtual-dtor -fno-exceptions -fno-check-new -fno-common -DMLT_PREFIX=\""/usr"\" -DENABLE_FIREWIRE -MT kdenlive.o -MD -MP -MF .deps/kdenlive.Tpo -c -o kdenlive.o kdenlive.cpp
In file included from kdenlive.cpp:115:
trackpanelclipmovefunction.h:166:2: warning: #warning - The following method is a bad example for programming design.
In file included from kdenlive.cpp:39:
/opt/kde/include/kedittoolbar.h:271: warning: 'KEditToolbarWidget' has a field 'KEditToolbarWidget::m_inactiveList' whose type uses the anonymous namespace
/opt/kde/include/kedittoolbar.h:271: warning: 'KEditToolbarWidget' has a field 'KEditToolbarWidget::m_activeList' whose type uses the anonymous namespace
In file included from /opt/kde/include/kfileitem.h:31,
from kdenlive.cpp:58:
/opt/kde/include/kfilemetainfo.h:1237: warning: type qualifiers ignored on function return type
In file included from ./docclipref.h:37,
from ./docclipproject.h:22,
from ./exportdvddialog.h:28,
from ./kdenlive.h:48,
from capturemonitor.h:22,
from kdenlive.cpp:65:
./effectstack.h:39: warning: type qualifiers ignored on function return type
In file included from ./exportdvddialog.h:28,
from ./kdenlive.h:48,
from capturemonitor.h:22,
from kdenlive.cpp:65:
./docclipproject.h:53: warning: type qualifiers ignored on function return type
./docclipproject.h:54: warning: type qualifiers ignored on function return type
In file included from /opt/qt/include/qdragobject.h:50,
from /opt/kde/include/kurldrag.h:24,
from clipdrag.h:21,
from kdenlive.cpp:66:
/opt/qt/include/qimage.h: In member function 'bool QImageTextKeyLang::operator<(const QImageTextKeyLang&) const':
/opt/qt/include/qimage.h:61: warning: suggest parentheses around && within ||
In file included from kdenlive.cpp:74:
documentbasenode.h: At global scope:
documentbasenode.h:56: warning: type qualifiers ignored on function return type
In file included from kdenlive.cpp:104:
documentgroupnode.h:40: warning: type qualifiers ignored on function return type
kdenlive.cpp: In member function 'void Gui::KdenliveApp::slotSetClipDuration()':
kdenlive.cpp:3267: warning: unused variable 'ok'
kdenlive.cpp: In member function 'void Gui::KdenliveApp::slotProjectDeleteClips(QStringList)':
kdenlive.cpp:3441: warning: unused variable 'refClip'
mv -f .deps/kdenlive.Tpo .deps/kdenlive.Po
g++ -DHAVE_CONFIG_H -I. -I.. -I/opt/kde/include -I/opt/qt/include -I. -I/usr/include -I/usr/include/mlt -D_REENTRANT -D__STDC_CONSTANT_MACROS -DQT_THREAD_SUPPORT -D_REENTRANT -Wno-long-long -Wundef -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wchar-subscripts -Wall -W -Wpointer-arith -O2 -march=i686 -mtune=generic -O2 -pipe -Wformat-security -Wmissing-format-attribute -Wno-non-virtual-dtor -fno-exceptions -fno-check-new -fno-common -DMLT_PREFIX=\""/usr"\" -DENABLE_FIREWIRE -MT kmmrulerpanel.o -MD -MP -MF .deps/kmmrulerpanel.Tpo -c -o kmmrulerpanel.o kmmrulerpanel.cpp
kmmrulerpanel.cpp: In member function 'int Gui::KMMRulerPanel::selectedMenuItem()':
kmmrulerpanel.cpp:160: warning: comparison between signed and unsigned integer expressions
mv -f .deps/kmmrulerpanel.Tpo .deps/kmmrulerpanel.Po
g++ -DHAVE_CONFIG_H -I. -I.. -I/opt/kde/include -I/opt/qt/include -I. -I/usr/include -I/usr/include/mlt -D_REENTRANT -D__STDC_CONSTANT_MACROS -DQT_THREAD_SUPPORT -D_REENTRANT -Wno-long-long -Wundef -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wchar-subscripts -Wall -W -Wpointer-arith -O2 -march=i686 -mtune=generic -O2 -pipe -Wformat-security -Wmissing-format-attribute -Wno-non-virtual-dtor -fno-exceptions -fno-check-new -fno-common -DMLT_PREFIX=\""/usr"\" -DENABLE_FIREWIRE -MT kmmscreen.o -MD -MP -MF .deps/kmmscreen.Tpo -c -o kmmscreen.o kmmscreen.cpp
In file included from docclipref.h:37,
from krender.h:34,
from kmmscreen.cpp:24:
effectstack.h:39: warning: type qualifiers ignored on function return type
In file included from exportdvddialog.h:28,
from kdenlive.h:48,
from krendermanager.h:26,
from kmmscreen.cpp:25:
docclipproject.h:53: warning: type qualifiers ignored on function return type
docclipproject.h:54: warning: type qualifiers ignored on function return type
mv -f .deps/kmmscreen.Tpo .deps/kmmscreen.Po
g++ -DHAVE_CONFIG_H -I. -I.. -I/opt/kde/include -I/opt/qt/include -I. -I/usr/include -I/usr/include/mlt -D_REENTRANT -D__STDC_CONSTANT_MACROS -DQT_THREAD_SUPPORT -D_REENTRANT -Wno-long-long -Wundef -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wchar-subscripts -Wall -W -Wpointer-arith -O2 -march=i686 -mtune=generic -O2 -pipe -Wformat-security -Wmissing-format-attribute -Wno-non-virtual-dtor -fno-exceptions -fno-check-new -fno-common -DMLT_PREFIX=\""/usr"\" -DENABLE_FIREWIRE -MT krender.o -MD -MP -MF .deps/krender.Tpo -c -o krender.o krender.cpp
krender.cpp:26:29: error: ffmpeg/avformat.h: No such file or directory
In file included from krender.cpp:40:
/opt/qt/include/qimage.h: In member function 'bool QImageTextKeyLang::operator<(const QImageTextKeyLang&) const':
/opt/qt/include/qimage.h:61: warning: suggest parentheses around && within ||
In file included from ./docclipref.h:37,
from ./docclipproject.h:22,
from ./exportdvddialog.h:28,
from ./kdenlive.h:48,
from krender.cpp:53:
./effectstack.h: At global scope:
./effectstack.h:39: warning: type qualifiers ignored on function return type
In file included from ./exportdvddialog.h:28,
from ./kdenlive.h:48,
from krender.cpp:53:
./docclipproject.h:53: warning: type qualifiers ignored on function return type
./docclipproject.h:54: warning: type qualifiers ignored on function return type
In file included from krender.cpp:57:
effectparamdesc.h:99: warning: type qualifiers ignored on function return type
krender.h: In constructor 'KRender::KRender(const QString&, QWidget*, const char*)':
krender.h:190: warning: 'KRender::m_winid' will be initialized after
krender.h:171: warning: 'double KRender::m_framePosition'
krender.cpp:62: warning: when initialized here
krender.h:174: warning: 'KRender::m_generateScenelist' will be initialized after
krender.h:162: warning: 'bool KRender::isBlocked'
krender.cpp:62: warning: when initialized here
krender.cpp:76: warning: deprecated conversion from string constant to 'char*'
krender.cpp: At global scope:
krender.cpp:121: warning: unused parameter 'self'
krender.cpp: In member function 'void KRender::createVideoXWindow(WId, WId)':
krender.cpp:146: warning: deprecated conversion from string constant to 'char*'
krender.cpp:180: warning: deprecated conversion from string constant to 'char*'
krender.cpp: In member function 'QPixmap KRender::extractFrame(int, int, int)':
krender.cpp:254: warning: deprecated conversion from string constant to 'char*'
krender.cpp: In member function 'QPixmap KRender::getVideoThumbnail(KURL, int, int, int)':
krender.cpp:303: warning: deprecated conversion from string constant to 'char*'
krender.cpp: In member function 'void KRender::getImage(KURL, int, int, int)':
krender.cpp:324: warning: deprecated conversion from string constant to 'char*'
krender.cpp: In member function 'void KRender::getFileProperties(KURL, uint)':
krender.cpp:426: warning: deprecated conversion from string constant to 'char*'
krender.cpp:447: error: 'AVFormatContext' was not declared in this scope
krender.cpp:447: error: 'context' was not declared in this scope
krender.cpp:447: error: expected primary-expression before ')' token
krender.cpp:447: error: expected `;' before 'mlt_properties_get_data'
krender.cpp:453: error: expected primary-expression before ')' token
krender.cpp:453: error: expected `;' before 'mlt_properties_get_data'
krender.cpp: In member function 'void KRender::setSceneList(QDomDocument, int)':
krender.cpp:511: warning: deprecated conversion from string constant to 'char*'
krender.cpp:552: warning: deprecated conversion from string constant to 'char*'
krender.cpp: In member function 'const GenTime& KRender::seekPosition() const':
krender.cpp:785: warning: returning reference to temporary
krender.cpp:786: warning: returning reference to temporary
krender.cpp: At global scope:
krender.cpp:823: warning: unused parameter 'dropped'
krender.cpp:843: warning: unused parameter 'sig'
krender.cpp:895: warning: unused parameter 'startTime'
krender.cpp:895: warning: unused parameter 'endTime'
krender.cpp: In member function 'void KRender::exportCurrentFrame(KURL, bool)':
krender.cpp:948: warning: deprecated conversion from string constant to 'char*'
krender.cpp: At global scope:
krender.cpp:937: warning: unused parameter 'notify'
krender.cpp:121: warning: 'void consumer_stopped(mlt_consumer_s*, KRender*, mlt_frame_s*)' defined but not used
make[2]: *** [krender.o] Error 1
make[2]: Leaving directory `/tmp/yaourt-tmp-dan/aur-kdenlive/kdenlive/src/kdenlive-0.5/kdenlive'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/tmp/yaourt-tmp-dan/aur-kdenlive/kdenlive/src/kdenlive-0.5'
make: *** [all] Error 2
==> ERROR: Build Failed.
Aborting...
Error: Makepkg was unable to build kdenlive package.

You sir should be up there with the Gods, thank you - it now compiles.
I still have a problem as it now crashes and not many clues as to why.
kdenlive
kdenlive: + + YOUR MLT INSTALL WAS FOUND IN: /usr
kdenlive: Mlt inited
kdenlive: Creating new document
kdenlive: deleting contents...
kdenlive: Creating new document DONE
kdenlive: Creating new document
kdenlive: deleting contents...
kdenlive: Creating new document DONE
kdenlive: **************** INIT DOCUMENT VIEW ***************
kdenlive: + + CREATING CONSUMER WITH PROFILE: atsc_1080i_60
kdenlive: + + CREATING CONSUMER WITH PROFILE: atsc_1080i_60
kdenlive: Creating new document
kdenlive: deleting contents...
kdenlive: Creating new document DONE
KCrash: Application 'kdenlive' crashing...
and
[KCrash handler]
#6 0xb7effca7 in mlt_properties_fetch () from /usr/lib/libmlt.so.0.2.4
If any light can be shed on this, I would be on cloud 9

Can't create or open a project in Robohelp HTML 8

Hi,
I just installed RoboHelp HTML 8.0.0.203 trial on Windows XP (SP3). It's the first RoboHelp
version I've installed on this computer.
No error occured during installation the program starts normally.
1. When I try to create a new empty project the program only creates the folder with
following files and folders:
!SkinSubFolder!
Adobe AIR.ssl
default.css
FlashHelp Pro.ssl
FlashHelp.ssl
Microsoft HTML Help.ssl
testproject.cpd
testproject.glo
testproject.hpr
testproject.ppf
testproject.syn
WebHelp Pro.ssl
WebHelp.ssl
At the moment when the new project file should open nothing happens not even an error
message.
2. When I try to open the sample project file CCC.xpj an error prompt tells me that the
opening of the project was aborted or CCC.cpd couldn't be loaded.
3. When I try to import a PDF (File>New>Project>Import>PDF) an "unexpected error" occures
during conversion.
I already reinstalled RoboHelp and I have administrator rights, but still the same problem.
P.S. I had the same problem on another system with the Robohelp 7 trial some months ago.
But RoboHelp X5 works fine on a third system, I consider an upgrade if the problem can be solved.

Well I tested to install RoboHelp 8 on my machine at home where the RoboHelp 7 trial didn’t work. At first with Comodo Firewall Pro enabled and it blocked the two attempts of Windows Installer to access the internet. ->Creating a project still doesn’t work.
Then I uninstalled Robohelp 8 and disabled the firewall. Installed Robohelp 8 again and tried to create a project but it still doesn’t work.
Also I installed Robohelp 8 on different machines at home (XP, Vista Business, 7 Professional) all running with Zonalarm Firewall and it worked.
But installing a new OS is no option for the company especially when everything else works fine.
Before I opened this thread I googled some time for this problem but couldn’t find anything. This is weird because I’ve installed it on two systems which have noting in common besides both run XP.

Importing MS Word into RoboHelp HTML / TOC Creation/ CHM output?

Hello,
I am a newbie to RoboHelp 8 and am trying out the Adobe Technical Communication Suite 2.5, and have a Windows 7 (64 Bit) OS.
At the moment, I have a single 40 page word document (MS Word 2010) that I would like to bring into RoboHelp 8.
With that said, I create a blank project, and then import the document. But, when I try to generate and view a help file, I am not seeing the table of contents. I have even done the AUTO TOC and verify that the links correspond to sections and sub-sections etc. - but still no TOC.
In addition, for some reason it brought in each of my figures twice, so that I have two figure 1s, two figure twos and so on.
Finally, it gave me an error message and was complaining about WidgetMax:
"Compilation failed while compiling http:\www.widgetmax.com."
I am not sure what that is about either.
Okay, one more question. Is there an easy way to break up all the sections/sub-sections into unique topics before or during inport into RoboHTML? It seems that RH 8 really needs to have multiple topics versus one long topic, containing what was formerly a MS Word document. What is the best approach to making that happen?
Overall, I am looking for a nice automated system, whereby I can take developer created documents (from protected MS Word templates) and bring them into RoboHelp HTML (version 8). Hopefully, I will not have to break apart the entire MS Word document first, before bringing it into RH 8.
Thanks for taking the time to answer the questions from a newbie.
-J

Hi there
My own guess is that you created a project using one of the supplied templates. Specifically, the Application Help template. This template already has a CHM window defined that contains a link to the WidgetMax.com site. When a link to a web site is defined in a CHM window, the compiler will squawk about it because it cannot resolve the link to a local HTML page. So you may safely ignore the message.
As for importing the Word content, you have some decisions to make. How do you want to edit the content after you get it into RoboHelp?
After you import you will abandon Word and make any changes to the documentation only using RoboHelp HTML.
You will continue to maintain the Word document using Microsoft Word and you will want to update RoboHelp HTML to reflect the changes
Depending on the avenue you wish to take, you will have different options for splitting the Word content into individual topics. Once we know which option you wish to use we can offer more guidance.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7 or 8 moments from now - $24.95!
Adobe Certified RoboHelp HTML Training
SorcererStone Blog
RoboHelp eBooks

RoboHelp HTML 9 Webhelp Layouts include all (unnecessary) project files

I am currently using RoboHelp HTML 9 on Windows 7 Pro. I have administrative rights on the computer.
My current project contains over 30 different webhelp layouts with 30 different TOCs that are all based on the different functions in a web-based application for a client. The project also includes over 30 different print layouts based on the same TOCs. I use build conditions to specify what I want to appear in the webhelp and print layouts. My project is organized into basically three main folders that represent Tasks, References and Concepts (as close to DITA as I can get this client). Each of these main folders has a subfolder named after a function and it contains the topics and screen captures that relate to that specific function task, function reference or function concept.
I created each webhelp layout in the SSL pod based on the specific TOC that was created for the function. In the WebHelp settings, I specified the TOC in the Content section along with enabling the "exclude unreferenced topics from output" and "exclude unreferenced baggage files from the output" options. In the Navigation section, I selected the appropriate skin that I customized along with enabling Contents and Search options with adding the About box.
With these settings my problem is that ever single webhelp layout includes all of the files in the three main folders, even when they are not referenced in the TOC. This has caused my outputs to explode in size because of the unnecessary folders filled with files (topics and graphics). How can I compile the webhelp layouts so they only output the files referenced in the TOCs and not every single file in the the three main project folders?
Any suggestions will be greatly appreciated because my client is not local and I have to send these files to them over the internet.
Thanks in Advance!

"Exclude unreferenced topics from output" starts by excluding topics that are not in the TOC etc. However if a topic in the TOC has a link to a topic that is not in the TOC, the linked topic will also be included to avoid a broken link. It also daisy chains so that if the second topic has further links, that too gets included.
The idea behind this option was that people wanted TOC only outputs but Adobe chose to implement it in this way. I can see why but I take the view that if that results in broken links, that is the author's responsibility. If you agree, then please follow this link and ask for true TOC based authoring.
http://www.Adobe.com/cfusion/mmform/index.cfm?name=wishform&product=38
Meantime you will, as Amebr points out, need to create build tags and expressions. There is a page on my site that covers that.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Error launching Robohelp HTML 6 (Build 099)

Similar Messages

Maybe you are looking for