Error launching the 'LabVIEW.A​pplication [Error Code: -18001]
Hello,
i have a TS 3.4 Sequence wit LabView 8.21-Teststeps.
The Sequence is called from an Labview-OperatorInterface.
In a step which run before 100 times without problems i suddenly get the error-message:
ErrorMessage: Error executing substep 'Run'.Unable to launch the 'LabVIEW.Application' ActiveX automation server [Error Code: -18001]
After a restart of al NI-Software everything is working normal again.
What does this error mean and what should i do with it?
Should i ignore the error and try to execute the step again or does this mean tht the ActiveX-Server was lost forever?
How can this problem happen?
Thanks for your help
Solved!
Go to Solution.
Hi,
Its difficult to know what the problems is that causes this. I am guessing you are using either the RTE or Runtime Server rather than LabVIEW Developement system.
Once you get this error you can't ignore it and hope that repeating the step will regain the link to the server. (well that's what I've noticed).
There is a patch for labview 8.2.1 http://joule.ni.com/nidu/cds/view/p/id/906/lang/en that you might what to try.
And there is TS version 4.0.
Regards
Ray Farmer
Regards
Ray Farmer
Similar Messages
-
Hello,
I have TestStand 2010 and LabVIEW 2010 development systems.
In the TS LabVIEW adapter is configured to use Development System.
Till today everything worked properly.
Today I tried to run TS sequence (which worked yesterday) and got error -18001.
I changed LV adapter configuration to use LVRTE and then back to Development System - and got error -18001 again.
Please see the image below.
LV2010 development system exists and I can use it: edit and run VIs.
How can this problem happen and how to resolve it?
Thanks in advance!
Attachments:
TSError_LV_App_ActiveX.JPG 135 KBHi,
there are multiple possible causes why you could encounter this error. Have a look in this KB:
http://digital.ni.com/public.nsf/allkb/5C692ACB049D0D30862575710051601F
cheers,
cheggers
Sascha E.
Group Leader Applications Engineering
National Instruments Switzerland -
Hello I Download Adobe Photoshop CC 2014 Last Night
i INSTALLED it But it Crashes in 30-40 Sec After i Launch the Product Without Any Error Message
I Need Help Can You Resolve This ProblemLotfi are you receiving any error messages during the installation? I would recommend reviewing your installation logs for errors. Please see Troubleshoot install issues with log files | CC - http://helpx.adobe.com/creative-cloud/kb/troubleshoot-install-logs-cc.html for information on how to locate and interpret your installation log files. You are welcome to post any specific errors you discover to this discussion.
-
LabVIEW FPGA: An internal software error in the LabVIEW FPGA Module has occurred
Hi,
I am trying to build a LabView FPGA VI. During compilation, I always get error stating "LabVIEW FPGA: An internal software error in the LabVIEW FPGA Module has occurred. Please contact National Instruments technical support at ni.com/support". At the time, comiplation process is almost at the end. "Final Timing (place and route)" shows as completed. When Checked the Xilinx log session, at the end it states that " Process "Generate Programming File" completed successfully". However, I do not see any generated bitfile.
When clicked on error details, it shows following:
LabVIEW: An unknown error occurred.
Error -2629 occurred at Error occurred while loading XML string. Invoke Node in niFpgaXml_PrettyPrint.vi->niFpgaWriteBitfileXml_Core.vi->niFpgaCompileWorker_CreateBitfile.vi->niFpgaCompileWorker_JobComplete.vi->niFpgaCompile_Worker.vi:6460001
Possible reason(s):
LabVIEW: An unknown error occurred.
I tried multiple times but so far no luck to generate bitfile for this VI. What could be wrong here?
I am using Labview 2013Hi Mark,
Here is the device utilization Summary. My development system is running with Windows-7 (32 bit) with 3GB RAM and Labview 2013.
Device Utilization
Total Slices: 90.0% (11970 out of 13300)
Slice Registers: 40.7% (43258 out of 106400)
Slice LUTs: 71.6% (38103 out of 53200)
DSP48s: 1.4% (3 out of 220)
Block RAMs: 22.1% (31 out of 140)
Timing
40 MHz Onboard Clock
: 40.00 MHz (57.90 MHz maximum)
80MHz (Used by non-diagram components)
: 80.00 MHz (100.19 MHz maximum)
--WillsG -
Error from debugger: Error launching remote program: security policy error
Hi all,
I bought yesterday the license for Iphone Developer, I'm programming
an app and would like to start testing it on my iPhone (EDGE, OS 2.1).
I'm using osx 10.5.5 on a MacBookPro, and latest SDK. Developing
and testing on simulator is ok, I followed all the procedure for requesting
certificates, downloading them, the provisioning file and dragged on
Xcode, I can see the iPhone with my provision name enabled for developing
in the Organizer view, and I followed instructions to configure Xcode to develop
on my device changing relevant options in the targets as explained online.
When I try to develop on device I get all the process, file is transferred
on device, but when launching I receive the error
Error from debugger: Error launching remote program: security policy error
Also when I try to launch the app from the phone it says there was
an error and it's not possible to lauch the app. Is that an error in my
steps configuring Xcode or is it something else?
Thanks,
GiancarloNever mind, I found it out, if you follow the exact guideline of apple, you will... get this error always
What you need is to make sure you have filled out the proper fields such as your bundle ID, although apple says it's auto-filled, it's not, in my case. you will need to change it from 'com.yourcompany....' to the one you set up on iphone dev site, such as 'com.toughgamer.testApp' in my case. -
Face time no longer works for me. Lost my contacts even! Keep trying to change PWD and keep getting same error message: The server encountered an error processing registration. Please try again later. Can you advise? Thanks!
Face time no longer works for me. Lost my contacts even! Keep trying to change PWD and keep getting same error message: The server encountered an error processing registration. Please try again later. Can you advise? Thanks!
-
Error writing the project file. Error loading type library / dll
Hi all,
I am trying to create a new portal project in PDK.NET. But I am getting this error- "Error writing the project file. Error loading type library / dll". Can anyone tell me how to solve this error.
rgdsI get this same error. Was working fine until I installed the SAP .Net Connector 2.0. Now it does not work even after it was uninstalled. Please help.
-
Hello, I get the below error when I start iCal and it tries to sync with my Yahoo Calendar. Any thoughts?
There was an unexpected error with the request (domain CalDAVErrorDomain / error 1 / description 'The collection at "/dav/xyx/Inbox/" is not an inbox.').I am having same problem - I've added events to Ical and it's not updating in my Yahoo calendar. Getting this message: There was an unexpected error with the request (domain CalDAVErrorDomain / error 1 / description 'The collection at "/dav/mcarthur_c/Inbox/" is not an inbox.').
-
Uln-yum-mirror [Errno 14] PYCURL ERROR 22 - The requested URL returned error: 416
Server is running Oracle Linux 6.5 and can receive updates from ULN without issue, I could easily upgrade the local servers version of Bash. The problem I am having is that the server is the local yum server however it is not downloading updates when I run /usr/bin/uln-yum-mirror I am receiving the errors below
[root@cr-svc-orayum1 yum]# cat /etc/oracle-release
Oracle Linux Server release 6.5
[root@cr-svc-orayum1 yum]# yum repolist
Loaded plugins: refresh-packagekit, rhnplugin, security
This system is receiving updates from ULN.
ol6_x86_64_UEKR3_latest/primary | 8.5 MB 00:21
ol6_x86_64_UEKR3_latest 234/234
ol6_x86_64_latest/primary | 41 MB 01:46
ol6_x86_64_latest 26159/26159
repo id repo name status
ol6_x86_64_UEKR3_latest Unbreakable Enterprise Kernel Release 3 for Oracle Linux 6 (x86_64) - Latest 234
ol6_x86_64_latest Oracle Linux 6 Latest (x86_64) 26,159
repolist: 26,393
[root@cr-svc-orayum1 yum]# yum clean all
Loaded plugins: refresh-packagekit, rhnplugin, security
Cleaning repos: ol5_x86_64_UEK_base ol5_x86_64_ksplice ol5_x86_64_latest ol6_x86_64_UEKR3_latest ol6_x86_64_latest
Cleaning up Everything
[root@cr-svc-orayum1 yum]#
[root@cr-svc-orayum1 yum]# /usr/bin/uln-yum-mirror
## BEGIN PROCESSING ol5_x86_64_ksplice ##
Channel Dir: /var/www/html/yum/OracleLinux/OL5/ksplice/x86_64
Loaded plugins: refresh-packagekit, rhnplugin
This system is receiving updates from ULN.
Saving Primary metadata
Saving file lists metadata
Saving other metadata
Generating sqlite DBs
Sqlite DBs complete
Wrote: /var/www/html/yum/OracleLinux/OL5/ksplice/x86_64/repodata/updateinfo.xml.gz
type = updateinfo
location = repodata/updateinfo.xml.gz
checksum = bd8daef04c28ee5907c0482c5a55e5fdb2c56fae
timestamp = 1412066205.18
open-checksum = cd80d41782f6770822485ade46f1a8bf75cfa20b
Wrote: /var/www/html/yum/OracleLinux/OL5/ksplice/x86_64/repodata/repomd.xml
## END PROCESSING ol5_x86_64_ksplice ##
## BEGIN PROCESSING ol5_x86_64_latest ##
Channel Dir: /var/www/html/yum/OracleLinux/OL5/latest/x86_64
Loaded plugins: refresh-packagekit, rhnplugin
This system is receiving updates from ULN.
Could not retrieve package alsa-lib-devel-1.0.17-1.el5.i386. Error was failed to retrieve getPackage/alsa-lib-devel-1.0.17-1.el5.i386.rpm from ol5_x86_64_latest
error was [Errno 14] PYCURL ERROR 22 - "The requested URL returned error: 416 Requested Range Not Satisfiable"
Could not retrieve package alsa-lib-devel-1.0.17-1.el5.x86_64. Error was failed to retrieve getPackage/alsa-lib-devel-1.0.17-1.el5.x86_64.rpm from ol5_x86_64_latest
error was [Errno 14] PYCURL ERROR 22 - "The requested URL returned error: 416 Requested Range Not Satisfiable"
Could not retrieve package alsa-utils-1.0.17-7.el5.x86_64. Error was failed to retrieve getPackage/alsa-utils-1.0.17-7.el5.x86_64.rpm from ol5_x86_64_latest
error was [Errno 14] PYCURL ERROR 22 - "The requested URL returned error: 416 Requested Range Not Satisfiable"
Could not retrieve package 5:am-utils-6.1.5-9.el5_10.x86_64. Error was failed to retrieve getPackage/am-utils-6.1.5-9.el5_10.x86_64.rpm from ol5_x86_64_latest
error was [Errno 14] PYCURL ERROR 22 - "The requested URL returned error: 416 Requested Range Not Satisfiable"
Could not retrieve package amanda-devel-2.5.0p2-9.el5.i386. Error was failed to retrieve getPackage/amanda-devel-2.5.0p2-9.el5.i386.rpm from ol5_x86_64_latest
error was [Errno 14] PYCURL ERROR 22 - "The requested URL returned error: 416 Requested Range Not Satisfiable"
Could not retrieve package amanda-server-2.5.0p2-9.el5.x86_64. Error was failed to retrieve getPackage/amanda-server-2.5.0p2-9.el5.x86_64.rpm from ol5_x86_64_latestFirst, you need to upgrade to the latest version of uln-yum-mirror to avoid these errors in future. The latest version has mitigation tools to remove RPMs that fail GPG checking.
In this instance, you need to manually delete the RPMs that pyCURL can't download. Once you delete all the RPMs, the next run of uln-yum-mirror will download them fresh and recreate the yum metadata locally. -
I keep getting the error message "The server encountered an error processing registration. Please try again later." What do I need to do to fix this
FaceTime for Mac: troubleshooting FaceTime.
http://support.apple.com/kb/ts4185 -
Error at the Time of Importing Tax Codes
Hi All
I m in the process of importing Tax Codes into the Production Environment; However, everytime i import the Transport Number, I get the below Error:
Tax jurisdiction CA1023000001 has defective structure
Message no. FS790
The Tax Jurisdiction has already been set up in OBCP...
Has anyone enocountered this before...
Thank u
RukshanaHi Rukshana,
I haven't encountered this error before, but Jurisdiction Code "CA1023000001" seems incorrect.
If it is a US Jurisdiction Code, the length should be 10 (2 + 3 + 4 + 1); and if it is Canadian Jurisdiction Code, the length should be 4 (2 + 2).
Check where this code definition is coming from and you will be able to isolate the problem.
HTH,
Manish Patel
Sr. SAP Solutions Consultant -
Is it possible to launch the SequenceAnalyzer from a C# code module in a Custom TestStand Editor
The Sequence Analyzer is not available in the Custom TestStand Editor Mode GUI.
Is it possible to add the Sequence Analyzer to a menu in the custom TestStand Editor?
Is it possible to launch the sequence analyzer from a C# code module, this method is then called from a sequence call back.
Best regards
PatrickFrom the TS Help:
TestStand Sequence Analyzer Application
Select Start»All Programs»National Instruments»TestStand»Tools»TestStand Analyzer or run <TestStand>\Bin\AnalyzerApp.exe to launch the stand-alone TestStand Sequence Analyzer application. Use this application to analyze projects outside of the TestStand Sequence Editor.
The sequence analyzer application window contains the following tabs:
Files—The files and directories to analyze.
Rules—The rules to use for analysis. Use this tab to enable, disable, and configure rules for analysis in the current project.
Options—Contains the project options that control the analysis and determine whether the sequence editor automatically saves the current analyzer project.
Messages—Contains the list of messages for the most recent analysis of the current project, sequence file, or workspace file. The sequence analyzer overwrites the content of the Messages tab each time you start an analysis session.
Analysis Summary—Contains a summary of the most recent analysis of the project.
Command-Line Usage
You can use the following command-line syntax to open an analyzer project:
AnalyzerApp.exe "C:\My Documents\MyProject.tsaproj"
CTA, CLA, MTFBWY -
Getting an error in the preview but no errors or warnings in the error list
I've got a SSRS report, originally written using SQL Server 2005, that I just upgraded to SQL Server 2012. I'm using the SQL Server Data Tools that you're supposed to work with now. I had to change the query and remove one of the fields returned by one of
the datasets in the report. I had some problems, but have worked through it.
Now I can run the application, if I specify my .RDL file as the starting item. However, within the SSDT development environment, if I try to preview the report I'll get the following:
"An error occurred during local report processing.
An error occurred during rendering of the report.
An error occurred during rendering of the report.
Index was out of range. Must be non-negative and less than the size of the collection.
Parameter name: index"
But the Error List shows no problems at all. Everything is fine. Everything works. And yet, there's nothing in the preview except for the error messages I've listed above.
So, how can there be "no errors, warning or messages" and yet there's nothing to be seen in the preview? And why does it work when I run it in SSDT?
RodHi Rod,
It's probably caused by data caching in the designer. When you changed the query and remove one of the fields returned by one of the datasets in the report, the dataset definition has been changed, but the actual cached data stored by Visual Studio (i.e.
the *.rdl.data file) still has data based on the old Dataset definition when reprocessing the report. This is in internal error caused by the mismatch between the data the report is expecting and what has been cached.
In this scenario, we can delete the *.rdl.data files from the drive, hit the "Refresh Fields" under the dataset properties for my dataset, then try previewing again.
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
If you have any feedback on our support, please click
here.
Katherine Xiong
TechNet Community Support -
I have an package with source , data flow and destination to execute on begin and commit.
in the below i have just used for questioning purpose with diagram removing my Data Flow task explaining my problem
on execution, i get error as
[Execute SQL Task] Error: Executing the query "COMMIT TRAN DimCompanyCode" failed with the following error: "The COMMIT TRANSACTION request has no corresponding BEGIN TRANSACTION.". Possible failure reasons: Problems with the query, "ResultSet"
property not set correctly, parameters not set correctly, or connection not established correctly.
as mentioned , i have checked the ResultSet, parameters , connection establish.. all are fine.
Kindly advice on what has to be done.
ShanmugaRajTo avoid this error, the RetainSameConnection property should set to 'True' for the Connection Manager - Application_DB.
Narsimha -
"Error in the dac kernel system" Error
I hope someone can help!
I have Diadem 10.2 logging external signals through a can card, which was working perfectly last week, but now if I try and get some data, it throws a message:
Error in the DAC kernel system
Unable to lock a memory space. (Error number: )
The machine has 1 Gb RAM, so I'm not sure what's happened.
Anyone got any ideas?Hi ,
Please can you post the original Error message text?
Are you able to start at least one measurement without error?
Greetings
Walter
Maybe you are looking for
-
Upgrade to Win 8.1 fubard my webcam
Hello all. I sincerly hope I posted in the correct board. Since upgrading my G550 from Windows 7 to Windows 8.1 several months ago, my onboard webcam refuses to work. It worked fine before the upgrade. I had to resort to using my separate Logitech we
-
Wireless scanning of Canon Pixma MX 725 doesn't work in 10.9.1
Hello, the built-in wireless scanning feature of Canon Pixma MX 725 doesn't work in 10.9.1. With USB-Connection everything is fine. Latest Apple Drivers are installed (Canon IJScanner5 version 2.3.1). I've also tried the new verison IJScanner5 3.1. W
-
I've noticed a stutter or jitter in the movies on DVDs I've created using iDVD 08. The effect is as if some frames had been periodically dropped throughout the entire movie. The problem does not exist in the original iMovie 08 video or the video view
-
Include Tool cost in Standard cost of material
Hi I have a scenario where we use consumable tools in manufacturing the end product , which is 'nut'. We use roughly 80 tools in the manufacturing process. Each tool has its life. For eg. Tool A will be used to manufacture 10,000,000 nuts. The prod
-
Hi, We have an NW2004s portal configured with logon ticket authentication with the backend system. When we login to the portal, the user id password combination is checked correctly. However when we change any object (say a planning function), the ch