"Error-less failure" to export to QT

Hi all,
I'm getting an error-less (i.e., no error message) failure when I try to export my iMovie 6.0.2 movie to QT. Here's the situation:
- 18 min movie, bunch of clips and photos, few tunes (no tunes from the music store)
- all application updates downloaded and installed
- trying to "share" my iMovie as a QT/Full Quality (I get a .mp4 created, not a .mov - not sure what the difference is?!)
- it tells me 36 mins to do this; with 6 mins to go, the process suddenly stops and I'm left with a 128MB .mp4 file that I can't open (when I double click it, I g
et "Error opening file")
I looked at the movie 5/6ths of the way along (just trying to interpolate here) - looks "normal".
Help! Is there a log file or error file I could look into? I really have no clue where to start!
Thanks very much in advance
Steve
iMac G5 Mac OS X (10.4.7) 2GHz + 2GB RAM
iMac G5 Mac OS X (10.4.7) 2GHz + 2GB RAM

wowy, welcome in the wide areas of video codecs...
a) iM supports mainly firewire connected miniDV camcorders =>dv codec
b) you are allowed to use mepg4 as codec - as for editing recording done with an iSight/internal cam as on MacBooks....
c) AVI is a container from the PC world... or "wrapper"; can contain almost "anything" as codec... many stills with ability for some "moving images" use mpeg1 as codec…
I would...
a) create a new project, choose when asked "dv/NTSC"
b) convert the AVIs BEFORE usage in iM... try Streamclip (free usage)
c) after conversion, import into iM project....
d) any reasons, why you want mp4 as output formatß what is your final goal with that project? web? iDVD?
I'm pretty sure, iM gets "confused" will all these conversions "on the fly"…

Similar Messages

Supplementary Error : System Failure

Guys please help >>>
I am getting this message : " Supplementary Error : System Failure " , they swapped my device is became less frequent ;however, still annoying ....
What do you think are the causes or the solution ?
MY DEVICE : bb curve 9320 7.1 Latest Bundle
BTW I WIPED MANY TIMES !

Hello mmok94
Welcome to BlackBerry Support Forums
Can you contact your Carrier and get your SIM replaced ! I cannot assure but in most cases replacing the SIM card has solved this error with most user .
You can try that .
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

Error LNK1123: failure during conversion to COFF

hello,
I'm new to the sdk and I'm trying to open the sample projects to understand what's going on here,
the problem is that when i try to build the project(for example the SDK_File_Import project)
i get the error:
Error
1
error LNK1123: failure during conversion to COFF: file invalid or corrupt
why is that?
please help
thank you very much in advance
jony

Hello,
This topic is a bit old, but I have the same problem. My english isn't perfect so I don't understand everything in the pdf guide.
I just started, and I would like to build the Export project, which is in the Exemple directory. (I took the cs6 premiere pro release 2)
I did this part of the guide : "On Windows, to specify where you want the built plug-ins to go, set a user environment variable
(right-click My Computer > Properties > Advanced > Environment Variables > User variables)
called PREMSDKBUILDPATH to the desired path (e.g. “C:\Program Files\Adobe\Common\
Plug-ins\[version]\MediaCore\”)", and I also put the exemple directory on “C:\Program Files\Adobe\Common\Plug-ins\[version]\MediaCore\”.
Then, I opened the SDK_Exporter file with visual studio 2010 (from “C:\Program Files\Adobe\Common\Plug-ins\CS5\MediaCore\Examples\Projects\SDK_Exporter\"), and tried to debug it with the x64 debugger.
I obtained this error : "LINK : fatal error LNK1123: failure during conversion to COFF: file invalid or corrupt"
May someone help me to build this?
Thanks for your help!

Serious Error shutdown message while exporting media

I am encountering an odd error message (from which I have never seen) when trying to export a project from Premiere Pro CC.
The error message (Sorry, a serious error has occurred that requires Adobe Premiere Pro to shut down. We will attempt to save your current project) shuts down Premiere about 11-25% into the export. If I remove all effects on the media, the file exports fine, but will not if the effects remain on the media.
I have checked the permissions (as per Adobe forum advice), and they all allow me to read and write files, so that is not the issue. I have also restarted my computer, uninstalled / reinstalled Premiere, and tried rendering in different outputs, none of which have worked.
I also have the error code, but am unaware of how to attach it to this question.
Set up:
Late 2012 iMac
Mac OSX 10.9.2
3.9 GHz Intel Core i7
8GB memory
NVIDIA GeForce GTX 680MX 2GB
Premiere Pro CC
Using H2.64 in .MP4 files
Installed Plug ins:
Red Giant Magic Bullet Color Suite (used DeNoiser II in media)
Has anyone any clue as to what I should do/try next?
Thanks for any input,
Michael

I apologize about the length, but I am unaware of how to attach the error
code, so I am just going to past them.
Error code 1:
Process: Adobe Premiere Pro CC Re: Serious Error shutdown message while exporting media!
Path: /Applications/Adobe Premiere Pro CC/Adobe Premiere Pro
CC.app/Contents/ MacOS/Adobe Premiere Pro CC!
Identifier:
Version:
Code Type:
Parent Process: launchd Re: Serious Error shutdown message while exporting media!
com.adobe.AdobePremierePro! 7.2.2 (7.2.2)!
X86-64 (Native)!
Responsible:
User ID:
Date/Time:
OS Version:
Report Version: 11!
Anonymous UUID: 8711E967-3395-F259-0577-C241B4768D8A! !
Sleep/Wake UUID: A31DF803-DBB0-48DE-800A-9076E03B5328!
Crashed Thread: 72 Dispatch queue: opencl_runtime!
Adobe Premiere Pro CC Re: Serious Error shutdown message while exporting media! 501!
2014-04-22 16:50:02.373 -0400! Mac OS X 10.9.2 (13C64)!
Exception Type: EXC_BAD_ACCESS (SIGSEGV)!
Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000008! !
VM Regions Near 0x8:!
--> !
__TEXT 0000000100000000-0000000100003000 Re: Serious Error shutdown message while exporting media r-x/rwx SM=COW /
Applications/Adobe Premiere Pro CC/Adobe Premiere Pro
CC.app/Contents/MacOS/Adobe Premiere Pro CC!
Thread 72 Crashed:: Dispatch queue: opencl_runtime!
   0 com.apple.GeForceGLDriver !
   1 com.apple.GeForceGLDriver !
   2 libGPUSupportMercury.dylib !
0x00001234402e3ec4 0x123440000000 + 3030724! 0x00001234402e4361
0x123440000000 + 3031905! 0x00007fff89e1f8f7 gldLoadBuffer + 80!
0x00007fff95dedb16
0x7fff95dbd000 + 199446! 0x00007fff95df9d61 0x7fff95dbd000 + 249185!
0x00007fff95ddca4a
0x7fff95dbd000 + 129610! 0x00007fff95de01f0 0x7fff95dbd000 + 143856!
   3 com.apple.opencl
   4 com.apple.opencl
   5 com.apple.opencl
   6 com.apple.opencl
   7 libdispatch.dylib !
   8 libdispatch.dylib !
   9 libdispatch.dylib !
   10 libdispatch.dylib
   11 libdispatch.dylib !
   12 libsystem_pthread.dylib
   13 libsystem_pthread.dylib
0x00007fff8b8a82ad dispatchclient_callout + 8! 0x00007fff8b8aa68f
dispatchqueue_drain + 451! 0x00007fff8b8ab9dd dispatchqueue_invoke + 110!
0x00007fff8b8a9fa3 dispatchroot_queue_drain + 75! 0x00007fff8b8ab193
dispatchworker_thread2 + 40!
================================
Error code trimmed down to essentials by moderator, with full report attached.

Error in writing to export file

Hi,
I am getting the below error on running export:-
EXP-00002: error in writing to export file
The query is as given below:-
exp cam3_mpcb2/cam3_mpcb2@ORA10G file='c:\MPCB_cam_20120113.dmp' log='c:\MPCB_20120113.log'
CAn i overcome this error by adding "ignore" at the end of the query or how can i modify the above query ?

Are there any other error messages that accompany the one you posted?
EXP-00002: error in writing to export file
Cause: Export could not write to the export file, probably because of a device error. This message is usually followed by a device message from the operating system.
Action: Take appropriate action to restore the device. Do you have permissions to write to this location?

Error while using the export utility

Dear all of
I am getting the following error while using the export utility in the Oracle database 9i
I have run the catexp.sql and catrm.sql suggested by the experts in this forum. But it did not help me. Kindly help me in solving this issue.
FOLLOWING ARE THE ERROR ----------------------------
EXP-00008: ORACLE error 942 encountered
ORA-00942: table or view does not exist
EXP-00024: Export views not installed, please notify your DBA
EXP-00000: Export terminated unsuccessfully
-----------------------------------------------------------------------------------------------------------------------------------

Can you go to this discussion please.
Re: Getting a strange error for Exp
-aijaz

FRM-41211 Integration error SSL failure

Hello
Environment Client/Server Developer 6i.
i installed developer on a new clinet machine to rum my application. every thing is fine but when he tries to run any report the following error occured:-
FRM-41211 Integrarion error SSL failure runing another product.
and i have re-install the devloper but the error is stand.
any solution?
regards
aaks

As Petr said make sure you're reports25_tmp is set in your registry and that the directory exists AND you have the rights to write to that directory.
You can also get this error if you try to issue a 2nd asynchronous run_product call to run a report and there is another one running. For this, Oracle has two 'solutions'.
1) Do not run more then one asynchronous report per session
or
2) Use a delay loop before calling the next report.
It's been my experience that #2 is worthless as, if it works, is doing pretty much the same thing as #1. I really hope this gets fixed (for good) at some point...somehow. <G>
Chad

FRM-41211: Integration Error: SSL failure running another product Error

Hai,
I am developing POS Application in Oracle(Forms6i/Reports6i). I design the Invoice Print Format in Reports6i and call from the Invoice Form. When the
user save the Invoice I Commit the Invoice and call the Invoice Report for Printing Immediately. I use Epson TM U210B Label Printer for Billing. Sometimes the Invoice Print is not coming in the Printer and it gives the
following error(especially the First print after restart the computer).
FRM-41211: Integration Error: SSL failure running
another product
After that if you print further for transaction no plm. only it gives the error first time of print
So Please give the solutions immediately. I am waiting for Ur favourable Reply.
Ur's Shahul

As Petr said make sure you're reports25_tmp is set in your registry and that the directory exists AND you have the rights to write to that directory.
You can also get this error if you try to issue a 2nd asynchronous run_product call to run a report and there is another one running. For this, Oracle has two 'solutions'.
1) Do not run more then one asynchronous report per session
or
2) Use a delay loop before calling the next report.
It's been my experience that #2 is worthless as, if it works, is doing pretty much the same thing as #1. I really hope this gets fixed (for good) at some point...somehow. <G>
Chad

Run report --- Integration Error ----SSL failure

I have a form that call a report through the Run_Product Built, this works fine on Developer 6 version, but after I upgraded to 6i, everytime I press the buttonn that call the report, an error message will appear that say "FRM-41211 Integration Error SSL failure running another product" after the Report Background Engine appeared. And the report will not start.
But if I press the button again, all will be fine.
Does anyone know what happens ?
PLease help!!!!

It is a bug in Forms 6i and possible workaround (from Metalink) is:
WORKAROUND as follows :
This brings up the Background Engine on startup and minimizes it.
1. Create a shortcut for rwrbe60.exe and do a CTRL+C to copy it.
2. Right click on the TASK BAR at the bottom of the screen and get the TASKBAR
Properties box up.
3. Select ADVANCED
4. Expand Tree for PROGRAMS.
5. Click of STARTUP folder.
6. Do a CTRL+V to Paste in the Shortcut to rwrbe60.exe.
7. Right Click on Shortcut and select Properties.
8. Click Shortcut Tab.
9. Make sure of the following fields are as follows:
TARGET : {drive}:\{path}\rwrbe60.exe /c
START IN : Is the location of your Reports and Forms.
SHORTCUT KEY : None
RUN : MINIMIZED

Integration error SSL failure running another product. - Urgent

Anybody knows what could be the possible problem and how to solve it. This error is coming when I am running RUN_PRODUCT built-in forms 6i, that application was running for 2 years in Forms 5, without any problem.
I have included the message what Forms doucmentaion had.
FRM-41211: Integration error: SSL failure running another product.
Cause: There is a problem detected when launching another product.
Action: Check the RUN_PRODUCT built-in.
Level: 99
Type: Error
null

I got this error when I was using 4.5, it may be caused by the
correctness of report_path in registry.
Regards,
George
Anybody knows what could be the possible problem and how to solve it. This error is coming when I am running RUN_PRODUCT
built-in forms 6i, that application was running for 2 years in
Forms 5, without any problem.>I have included the message what
Forms doucmentaion had.>FRM-41211: Integration error: SSL
failure running another product.>Cause: There is a problem
detected when launching another product. >Action: Check the
RUN_PRODUCT built-in. >Level: 99 >Type: Error >null

Integration error SSL failure running another product

Dear All,
I am facing some problem while running reports from forms
SERVER:
•     OPERATING SYSTEM: Windows.8
•     Database: ORACLE 11g
•     Forms & Reports = 6i.
In form when click any report button to call report some time error comes.
FRM-41211: integration error SSL failure running another productAnd user can not print the report,

Forms/Reports 6i on Windows 8? I very much doubt that this is going to work. The last supported OS for Forms/Reports 6i was Windows XP.
You might have some luck with a non-supported workaround:
http://windows7bugs.wordpress.com/2012/08/25/windows-8-oracle-developer-suite-6i-patch-18/

Integration Error:SSL failure running another product.In DeveloperSuite 10g

I'm using DeveloperSuite 10g. I'm trying run the report from Forms but when I'm
clicking on button to run report using RUN_REPORT_OBJECT I'm getting following
error :
Integration Error : SSL failure running another product.
Can any one explain why I'm getting this error.
Regards
Alpesh.

Hi alpesh
I think you are good at oracleDS 10g and it is running on your machine successfully. But I am not able to run any form on my system.
My OS is Win XP with service Pack 2
Installed Oracle Database 10g
Installed Oracle DS 10g
Able to run reports on paper layout and web layout, But can not run forms. Error is shown on the IE Ver 7. Only source code is displayed. can you help me out from this.

Error : FRM-41211 : Integration Error: SSL Failure Running Another Product

Hi All
I am using Forms & Reports 10g.
I have a report .And i am trying to call in my forms and also i am passing parameters.
But i am getting this error :
My Code is :-
DECLARE
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status VARCHAR2(20);
plid ParamList;
vParamValue number;
BEGIN
plid := Get_parameter_List('tmp');
IF NOT Id_Null(plid) THEN
Destroy_parameter_List( plid );
END IF;
plid := Create_parameter_List('tmp');
Add_Parameter(PLid, 'P_Block', Text_Parameter, :block_query.item_block);
Add_Parameter(PLid, 'P_Category', Text_Parameter, :block_query.item_category);
Add_Parameter(PLid, 'P_Dept', Text_Parameter, :block_query.item_dept);
Add_Parameter(PLid, 'P_Floor', Text_Parameter, :block_query.item_floor);
Add_Parameter(PLid, 'P_IP', Text_Parameter, :block_query.item_ip);
Add_Parameter(PLid, 'P_Room', Text_Parameter, :block_query.item_room);
Add_Parameter(PLid, 'P_Userid', Text_Parameter, :block_query.item_usr_id);
Add_Parameter(PLid, 'PARAMFORM', Text_Parameter, 'NO');
repid := FIND_REPORT_OBJECT('REPORT_Query');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,cache);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'PDF');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_OTHER, 'paramform=no');
v_rep := RUN_REPORT_OBJECT(repid,plid);
rep_status := REPORT_OBJECT_STATUS(v_rep);
WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
LOOP
rep_status := report_object_status(v_rep);
END LOOP;
WEB.SHOW_DOCUMENT('http://A_F2_ITT_PC_4.AAHOS.LOCAL:8890/reports/rwservlet/getjobid'||substr(v_rep,instr(v_rep,'_',-1)+1)||'?
*'||'server=Report_server_name&P_parameter='||'&block='''||:block_query.item_block*
*||'&category_name='''||:block_query.item_category*
*||'&dept='''||:block_query.item_dept*
*||'&floor='''||:block_query.item_floor*
*||'&ip_address='''||:block_query.item_ip*
*||'&room='''||:block_query.item_room*
*||'&usr_id='''||:block_query.item_usr_id*
*||'&paramform=no');*
End;
And the error i am getting is :- FRM-41211 : Integration Error: SSL Failure Running Another Product

hi
please try something like this.
DECLARE
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status VARCHAR2(20);
plid ParamList;
vParamValue number;
BEGIN
plid := Get_parameter_List('tmp');
IF NOT Id_Null(plid) THEN
Destroy_parameter_List( plid );
END IF;
plid := Create_parameter_List('tmp');
add_parameter(plid,'p_parameter',text_parameter,to_char(:block.item));
Add_parameter(plid, 'PARAMFORM', TEXT_parameter, 'NO');
repid := FIND_REPORT_OBJECT('REPORT6');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,cache);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'PDF');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_OTHER, 'paramform=no');
v_rep := RUN_REPORT_OBJECT(repid,plid);
rep_status := REPORT_OBJECT_STATUS(v_rep);
WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
LOOP
rep_status := report_object_status(v_rep);
END LOOP;
/*Display report in the browser*/
WEB.SHOW_DOCUMENT('http://Machine_Name:8889/reports/rwservlet/getjobid'||substr(v_rep,instr(v_rep,'_',-1)+1)||'?
'||'server=repserver&P_parameter='||:block.item||
'&paramform=no');
END;

I am using Lightroom 5.7, 64 bit with Windows 7 Professional. For no apparent reason, I now get an error message when I export a photo, say a raw image to a JPG. However, the exported image seems to be OK. But now I notice that my LR directory of folders

I am using Lightroom 5.7, 64 bit with Windows 7 Professional. For no apparent reason, I now get an error message when I export a photo, say a raw image to a JPG. However, the exported image seems to be OK. But now I notice that my LR directory of folders in Library view does not show images correctly: If there is a folder with sub-folder(s), the folder will indicate 0 images, but the sub-folders show the proper number of images. What happened and is there a fix? I tried uninstalling Lightroom and re-installing, but problem persists.
Here is a screen shot of the error message:
Message was edited by: Joseph Costanza, Jr.

See here for a solution.

By the today e-received updates for Adobe Photoshop Elemenst 12.1 and Adobe Premiere Elements 12.1 I got this error messages: Failure code = U44M1P2003. What to do? System = Window7 64bit.

By the today e-received updates for Adobe Photoshop Elemenst 12.1 and Adobe Premiere Elements 12.1 I got this error messages: Failure code = U44M1P2003. What to do? System = Window7 64bit.

Sometimes the Adobe servers used for the updates can get busy and it’s necessary to try a couple of times. Also make sure you don’t have a firewall which may be blocking the connection. It sometimes helps to temporarily disable internet security/anti-virus software. Because the Organizer is shared by both programs it often helps to do the PSE update first, followed by the PRE update in that order.
Select the 12.1 update for PSE from the updater dialog and ensure everything else is unchecked. Quit PSE and PRE if you have it running and then start the update.
If PSE updates properly to 12.1 repeat the process for PRE.

"Error-less failure" to export to QT

Similar Messages

Maybe you are looking for