Error light comes on PSC 1315 with new cartridge used as copier

Error light comes on with new cartridge when PSC 1315 is used as copier (computer not connected.)
When computer is on, software detects cartridge and there is no error message. Unit will not print
or copy. Any help appreciated.
jmike

hp 1315X all in one.......when I turn on printer the 'check print cartridge light' goes on and I cannot print.
After it sits for a week or so, it might operate for just one copying job then goes back to above problem.
Have taken cartridges out and put back but the check print cartridge light goes on and cannot dtermine if it
is black or color problem . Is it worth taking to repair? Thanks

Similar Messages

I am trying to print a document. The light comes on that the Cyan ink cartridge is out of ink

I am trying to print a document. The light comes on that the Cyan ink cartridge is out of ink....it is at least half full...i have shaken it, disconnected the printer from power source and the pc...still will not stop flashing. Oh, sorry...it is a hp business inkjet printer
Windows XP

It could be that the cartridge failed. Replace it with a new one and check.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

HP Photosmart C6180 All-in-One won't print magenta or light magenta, even with new cartridges

The printer suddenly stopped printing magenta and light magenta. I installed new cartridges from LD, which have always worked in the past, but none worked. No error messages.

Hi there @Optical32 and welcome to the forums
I read about how your Photosmart C6180 is no longer printing in light magenta and magenta, with no error messages. I'd like to offer my suggestion for you that may help.
Click this link and try these steps: Color Mix or Missing Colors on the Diagnostic Page
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you, such as a replacement or trade in. If you are calling within North America, the number is 1-800-474-6836 and if you are calling outside of the US/Canada region,: click here.
Best wishes
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

C5280 printer error "remove and check colour cartidge" even with new cartridge and contact cleaning

Error message repeats even after-
1 installing new colour cartridge,
2 cleaning of cartrdge contacts, and printer contacts
3 off/on power,
4 sliding cartridge from right to left
5 removed and placed back paper
6 unplug electrical wire connection
Thank you

Try steps 3,4,5,6 in the link below:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01611456&cc=us&lc=en&dlc=en&product=3204464&tmp...
I work for HP but my posts and replies are my own.
Have a great day!!!

Officejet 4620 All in one Not printing even with new cartridge

My printer has suddenly stopped printing.
There are no error messages.
My ink level is full.
It slowly started "running" out of ink as I was printing.
New cartridge.
Cleaned printer heads twice.
Ran print quality report and it acted like it was printing but didn't.
Any ideas??

The document here may help resolve black not printing on your Officejet 4620. Be sure to check the vents, if they are blocked the printer will appear to be running out of ink early in the cartridge life.
If the troubleshooting steps there do not resolve the issue I sould suggest you contact HP, 1-800-HPINVENt if you are in the US or see the document here for elsewhere. They may be able to help resolve the issue even if the printer is not in warranty as described in this post.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Problem with "new page as a copy" function in 4.2

Hi all,
I found several problems with version 4.2 in the functionality of "new page as a copy".
In particular, copying a page from another application, you lose the references to the template (eg template region, button ...) and these are replaced by a numeric code (eg 426589173 ... instead of "Region without Buttons and Titles") and, worst of all, the reference is lost to the buttons on the process conditions and branches.
Has anyone encountered the same problem? I never had any problems with version 4.1.1
Thanks
Stefano
Edited by: Stefano_i0600006 on 18-ott-2012 7.52
Edited by: Stefano_i0600006 on 18-ott-2012 7.52

Hi Stefano,
Thank you for bringing this issue to our attention. I've logged bug *14786585* to track this issue. We'll endeavour to identify a resolution as soon as possible.
Regards,
Hilary

Black ink no longer works even with new cartridge

After trying 2 new cartridges, the black ink seems to have suddenly stopped working. I've done Status Report, Quality Report, Clean Printhead, and Align Printer. Color all works fine. On Quality report the black box is blank. I tried copying a sheet with black typing. A black copy was blank. A color copy had a slight brown printing.

Sorry to hear this. I'm going to help follow up on this for you (you should be hearing from someone via private message). I take it you're based in the US, right?
Although I am an HP employee, I am speaking for myself and not for HP.
Twitter: @Ciara_B_HP

Can Windows 7 cause a permanent error light on a PSC 1510?

Have a PSC 1510 that has been lightly used with HP computer and Windows XP for a couple of years. Have new laptop with Windows Home Premium 7. Downloaded driver for the 1510, connected, started a print job and after one page, the check paper light started to blink. Have been through all the diagnostics twice with no success. Perhaps it was timing coincidence but the printer will do nothing. The inside is so clean it is not even dusty, I think it has ever had a jam. I currently have 3 other HP printers and several computers so I pretty familiar with drivers, cleaning, etc.

Hi,
According to your description, it seems like system considerable file corrupt. It would be better to use Windows installation disc to make system repair to fix this problem.
If you didn't have Windows installation disc in your hand, you can refer to the link below to create a system repair disc.
Create a system repair disc:
http://windows.microsoft.com/en-us/windows7/create-a-system-repair-disc
Roger Lu
TechNet Community Support

Error connecting oracle10g in forms developer with new installed 11g dbase.

Hi
I have installed oracle 11g database and its works well.
Later i needed the oracle developer suite 10g for doing my forms and reports and installed it.
I am facing problem while connecting to database and getting the following error.
"ORA-12154:TNS: could not resolve the connect identifier specified"
even if i start manually SQL PLUS through the start->all programs->oracle devsuitehome->application developer->sqlplus then i get the following error.
ERROR - "Procedure entry point longjmp could not be located in the dynamic link library orauts.dll"
Can anybody tell me how to use both of them without uninstalling either of them.
I have seem some answers that we need to create separate oracle home for both of them.I have no idea about setting it ,as many suggested not to change anything if not confident.
so please help me out.
I installed it on my Windows XP SP3 and these are available in my environment variables ->system variables ->path:
J:\DevSuiteHome_1\jdk\jre\bin\classic;J:\DevSuiteHome_1\jdk\jre\bin;J:\DevSuiteHome_1\jdk\jre\bin\client;J:\DevSuiteHome_1\jlib;J:\DevSuiteHome_1\bin;J:\DevSuiteHome_1\jre\1.4.2\bin\client;J:\DevSuiteHome_1\jre\1.4.2\bin;J:\app\Abhijeet\product\11.2.0\dbhome_1\bin;C:\Program Files\PC Connectivity Solution\;%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;E:\QTP 10\bin
Thank you.

ERROR - "Procedure entry point longjmp could not be located in the dynamic link library orauts.dll"Check you ORACLE_HOME and PATH variables and set correctly.
"ORA-12154:TNS: could not resolve the connect identifier specified"Check your tnsnames.ora and listener.ora

HP OfficeJet 6310 All-In-One printer won't print in color with new cartridge

HP OfficeJet 6310 All-In-One printer on a iMAC OSX version 10.9.5 system
Hello,
As I don't print in color much but had need to I discovered my printer not printing in color. I trouble shooted and even replaced with an new HP95 new from Office Depot ( I never buy refilled). The printer still won't print color but it advances the paper as if it was printing - just no ink on paper. I have cleaned thoroughly the ink jet heads, cartridge area, and run all the alignment and printer utilities. The test page print does not show color either. I have no error messages. Don't know what else to do.
thanks
DH

Hi there @dhengr!
Thanks for contacting the HP Forums!
I can see your having a print quality issue with your HP OfficeJet 6310. I should be able to provide documentation that will help locate a resolution. You mentioned you have already tried another HP95 tri-color cartridge with no resolution. I also noticed you said that the quality report from the printer also has no color ink.
If a stand alone test report is performed from the front of the printer such a printhead cleaning or print quality report and there is no color on the page then you are likely looking at a hardware issue within the printer. I have provided a document regarding Missing, Faded, or Dull Colors on the HP Officejet 6310 All-in-One Printer. If you follow the document from start to finish and still have the same issue then I would recommend contacting our HP tech support via phone. They deal with hardware warranty and replacement options.
Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Have a great weekend and thank you again for posting on the HP Forums!
Cbert
I work on behalf of HP.
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" at the bottom of this post to say “Thanks” for helping!

Will not print black. ink cartridge is new. also shows low black level with new cartridge.

HP Photosmart C6180 all-in-one. Will not print Black. Also shows low black ink on ink level. Cartridge is new and HP brand.
In printing colors, very light and has RED hue as there is no black. Also two other cartridges show low ink when all the cartridges have been replaced.

Hi there,
Download and run the print and scan doctor located here (amoung resolving some things automatically it can give us a better idea of what is going on with the printer). Give the steps outlined a shot and let us know the results.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Wont print black, even with new cartridge

Officejet 4620 running mac Maveric, I have worked every step in the trouble shooting page. Reinstalled the driver. Restarted both computer and printer. This problem started very abrubtly. I doubt this is involved, but it started right after an adobe update of some kind. all other colors seem to work fine. The cartridge read 75% full but I tried installing a new one anyway and got the same result. Any help is much appreciated.

Bill1003 wrote:
I've also done all the above with no results. I noticed that my black was beginning to fade until there was nothing. If the printhead is dead - which is cheaper? have is replaced or buy a new printer?
Hi Bill, which printer model do you have? Is it within warranty? Typically warranty is ~1yr from date of purchase. You should be able to check by entering the serial no. below...
http://h10025.www1.hp.com/ewfrf/wc/weInput?cc=ie&lc=en
Although I am an HP employee, I am speaking for myself and not for HP.
Twitter: @Ciara_B_HP

PSC 1315 "The print cartridge carriage is stalled."

I have been using this printer for a couple years. Last week everything was fine but now when I try to print, I get this error message: "The print cartridge carriage is stalled." I have not changed the ink cartridge, I have not moved the printer, nothing on my computer changed, I use XP and have since I bought the computer. But all of a sudden I now get this message. It wont let me print, if I try to reset the printer, it goes back to this message. I then bought all new ink cartridges (HP brand) and get the same message.
Any suggestions?

Try this support document;
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01577214&cc=uk&lc=en&dlc=en&product=374568
Greetings,
Bart

How to replace namespace tag with new value using -JAVA MAPPING

Hi Guys,
I need to replace namespace Tag in Target xml with a new value.
For Eg: My namespace Tag is - <ns0:TestHeader xmlns:ns0="http://0020.TestHeader.SS.com">
I want My target xml to have value- <ns0:TestHeader>
How can i achieve it using JAVA mapping?
Can you provide me the code to do so.

Sarjana,
Not well-formed XML is only possible by Java Mapping. Please use below replace logic in Java map.
inputContent.replaceAll("<ns0:TestHeader xmlns:ns0=\"http://0020.TestHeader.SS.com\">", "<ns0:TestHeader>");
Link1, Link2.

Brand New HP Officejet 4632 printer with new cartridges. Black ink showing empty

I just bought a brand new HP Officejet 4632 printer and as soon as I put in the ink cartridges that came with the printer it said printing in single cartridge mode and the black ink shows empty. I haven't even used the printer yet and it already shows empty. What do I do?

Hello bobboman11,
Welcome to the HP Forums.
I see that you are having an issue with the ink cartridges in your new printer.
Please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
Take the ink out of the printer and with a lint free cloth and some bottled water, lightly dampen the cloth and clean the metal contacts on the cartridges and the contacts on the carriage. Make sure every thing is dry and make sure that the protective cover is completely off of the ink. Insert the ink in to the printer and attempt a test print.
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thanks for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Error light comes on PSC 1315 with new cartridge used as copier

Similar Messages

Maybe you are looking for