Error. Lightroom catalog can't open

Hello I keep getting the error: 'The Lightroom catalog named Lightroom 5 catalog cannot be opened because another application already has it opened' when opening Lightroom. There is no other application using it. there is only one file available, no back up as I have been uploading a 5.3TB catalogue over the past 4 days and didn't shut down. the RAW files sit on a separate hard drive to the laptop where the Lightroom catalogue is. I cannot now access that catalogue. I had a crash prior to this happening ... can anyone help out there?

I just wonder whether it was GB not TB!!!!
JimHess wrote:
Good grief! That flew right by me. That is one huge catalog. I wonder if there is a "practical" limit to catalog size.Or I wonder if this is terminology confusion. Catalog size vs. library size.

Similar Messages

When trying to open iphoto I get the error message "You can't open the application iPhoto because it may be damaged or incomplete." How do I fix this and get my photo's back?

When trying to open iphoto I get the error message "You can't open the application iPhoto because it may be damaged or incomplete." How do I fix this and get my photo's back?

To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
If you purchased it on the App Store you can find it in your Purchases List.

I keep getting the error message: " You can't open the application "%@" because it may be damage or incomplete" when I try to install a software that I purchased.

I have a typing software that I bought a while ago. I had installed it on an old pc but I just bought a macbook and I'd like to install it onto the new macbook, as I no longer use the old pc. When I open the installer, I get the error message: " You can't open the application "%@" because it may be damage or incomplete"
Does anybody know if this is fixable or if I need to just buy a new disk?
Thanks!!!

I copy pasted this from the developers website for the minimum requirements of your device: Macintosh® OS X 10.4 – 10.5, PowerPC G4, G5 or Intel Core Duo processor, 800 MHz processor or higher, 256 MB RAM, CD/DVD-ROM drive, 300 MB free hard disk space, Video card with 32 MB of video RAM, 1024 x 768 24-bit color display, Speakers, keyboard & mouse.
Does a macbook pro meet these requirements?

Got an error message "You can't open the application iMovie because it may be damaged or incomplete" What do I do next to try to fix? Thanks.

I tried accessing imovie after not using it for a long time and got an error message "You can't open the application iMovie because it is damaged or incomplete. I'm not sure how to go about addressing it. Your suggestions would be very much apprecaited.

Judging by your OSX, I presume that your iMac would have come with 2 installation discs.
iMovie and all the iLife software will be on disc 2.
Run the disc and re-install iMovie.
After that, do a software update.,
Best,

After migration to a new macbook i cannot open photoshop. I get error message "you can't open this application "adobe photoshop cs" because powerpc applications are no longer supported"

after migration to a new macbook i cannot open photoshop. I get error message "you can't open this application "adobe photoshop cs" because powerpc applications are no longer supported"

You cannot run Photoshop CS on a new Intel-based Mac running OS X Mavericks. CS is far too old.
You'll have to buy Photoshop CS6 or Photoshop Elements 12. Or subscribe to CC.

I keep getting this error code 7 (windows error 126). can't open itunes, what do i do?

i keep getting this error code 7 (windows error 126). can't open itunes, what do i do?

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99703)

Mac OS 10.7.4, installing Microsoft Office 14.2.7, error "The Installer can't open the package. There may be a problem with file ownership or permissions."

Mac OS 10.7.4, updating new version Microsoft Office 14.2.7, ERROR "The Installer can’t open the package. There may be a problem with file ownership or permissions."
The Apple Installer version is Version 5.0.1 (537).
When I check the Installer Log, I find only these two messages that I do not understand.
Jul 12 09:29:13 Bruces-MacBook-Pro Installer[423]: Install's runner tool is not properly configured as a setuid tool.
Jul 12 09:29:13 Bruces-MacBook-Pro Installer[423]: Unable to create InstallController
I changed all the permissions for all the Microsoft Office Folder users to Read and Write.
Restart, same error

See:
https://discussions.apple.com/thread/1948155?threadID=1948155&tstart=1
I had identical Installer Log failure notices: I used Houdini to view the invisible files and per Limnos' suggestion cautiously dragged
user > library > preferences > com.apple.installer.plist out of that folder onto my desktop and double-clicked on the .pkg file again and it opened and installed properly.
My Installer now works properly on all .pkg files.

Im getting a constant error message: "you can't open the application PACE because PowerPC applications are no longer supported". I cant find PACE to delete it?

Im getting a constant error message: "you can't open the application PACE because PowerPC applications are no longer supported". I cant find PACE to delete it?

PACE is a rather crappy copy protection software used by the following;
Antares
Melodyne
Cycling 74 Max/MSP/Jitter
iZotope oZone
Line6 POD Farm
McDSP plug-ins (some software purchases include a green iLok key)
MOTU
Overloud
Pro Tools
Serato
Virtually all Digidesign (RTAS and TDM) plug-ins
Virtually all Waves Products
So if you have any of there, they might be the cause of your problems.
Allan

New MacPro 10.9.4 included Keynote. Worked fine. An update was released August 21. Just downloaded the 6.2.2 update and now get error message "You can't open the application because PowerPC applications are no longer supported". Any ideas?

New MacPro 10.9.4 purchased three weeks ago included Keynote. App worked fine. New update for Keynote was released August 21. Just downloaded the 6.2.2 update. Tried to launch app and now get error message "You can’t open the application “Keynote.app” because PowerPC applications are no longer supported." Confused as to why it worked prior to update. Nothing else has changed. No issues with recent iMovie, Pages or Numbers updates. Any ideas?

I tested this:
Reinstalled Aperture 3.1 from the Trial Installer.
In some way it seems to be working. But the whole thing is a scary Chimera.
It can create an Aperture library. I can import and edit images, even in Graphic Converter ias an external editor.
But the Media Browser does not show the aperture Library that I created.
The versioning is inconsistent. The library appears as an Aperture 3.4 library in the Finder. Aperture 3.5 seems to be able to read this library and to upgrade it to 3.5
The Applications folder is showing the application as version 3.4 and as compatible. Spotlight is showing it as illegal.
When opening the chimera Aperture, I see plenty of warnings in the Console window:
An Aperture "Hang" report
xpcproxy assertion failed
com.apple.IconServiceAgent: main failed to composite image
quicklookd: Warning
and more ... the hang was critical. I had to force quit Aperture more than once.
So be careful. I would not trust any important Aperture library to this patched application, without testing thoroughly. Be careful with your precious photos.

I downloaded Maverick X 9.2 on my Mac Air. I get this error message: "You can't open the application "microsoft Word" because PowerPC applications are no longer supported." Help?

I downloaded Maverick X 9.2 on my Mac Air. I get this error message: "You can't open the application "microsoft Word" because PowerPC applications are no longer supported." Help?

QUESTION: Were you induced to upgrade to Mavericks after seeing this dialog box?

I tried to download the latest itunes update, but received an error and now can't open itunes at all. Help?

i tried to download the latest itunes update, but received an error and now can't open itunes at all. Help?

Hello bajura007,
Thank you for the details of the issue you are experiencing with installing the latest iTunes update. I recommend following the steps below:
Resolution
Follow these steps to resolve the issue:
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
When you get to the step to uninstall iTunes, it is important to uninstall iTunes and the related components in the order listed in the link for that step.
You can find the full article here:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Thank you for using Apple Support Communities.
Best,
Sheila M.

#3125 error. I can not open the file

We work on a Mac and a Win machine. We share the files via a NAS. We now encounter the problem that the muse-site saved by the Win machine can no longer be openend by the Mac. (#3125 error. I can not open the file). The only option to continue is to work via the Win machine.... ;-((( Please give us a solution. Ed

A 3125 error indicates the operating system returned an error when Muse attempted to open the file.
It's highly unlikely there's anything wrong with the file. If you haven't already confirmed, if you copy the file to the Mac's local drive it will open fine.
I'm suspicious of file/folder permissions. Is it possible the account used to mount and write to the NAS from Windows has different user permissions than the account that's attempting to read it on the Mac? I could theorize a 3125 error might occur if one user with the necessary permissions wrote a file to the NAS and then a second user with insufficient permissions attempted to open it.
Also, two users cannot simultaneously open the same .muse file on the NAS. Is that what's being attempted in this case? Muse goes to great lengths to attempt to prevent this and should put up an error about the file already being open in another copy of Muse. However, how that's detected is dependent on OS APIs that have subtly different behaviors on different servers and server protocols.

Error message: 'you can't open the application because the Classic environment is no longer supported'

I get the error message 'you can't open the application because the Classic environment is no longer supported', when will this issue be fixed? I need to use a program to analyse videos called 'J watcher' that is vital for my thesis. It worked in the last operating system but refuses to open in this one. When will this issue be fixed/what can I do about it?

Is there any way to fix this?
Yes, but it's not easy.
I've only tested this on Snow Leopard, but I think it will work in Lion. You need to have Java installed, which it's not by default in Lion. Since I'm not using Lion myself, I can't tell you how to do that.
Download the Java/Mac version (1.0) of the application from JWatcher Downloads. You'll get a zip archive. Expand it. Now you have an application called "JWatcher_V1.0." This is only the installer. It won't run, because it has PowerPC-only version of the Java application stub.
Select the line of text below in your browser and copy it to the clipboard:
/System/Library/Frameworks/JavaVM.framework/Versions/A/Resources/MacOS
In the Finder, select Go > Go to Folder... from the menu bar (this menu may be slightly different in Lion.) Paste the clipboard contents into the text box. You should now see a folder with two files in it, one of which is named "JavaApplicationStub." Leave that window open.
Now right-click on the icon of JWatcher_V1.0 and select "Show Package Contents" from the contextual menu. A new Finder window opens. Open the folder called "MacOS". Inside that folder is a file also named "JWatcher_V1.0". Move it to the Trash. Drag the file JavaApplicationStub to where it was. Rename the file (it will be copied, not moved) JWatcher_V1.0. Close the Finder window.
Now double-click the installer. It should launch. Install the application wherever you choose. You're not done yet.
The installer creates a folder named, once again, "JWatcher_V1.0". Inside it is an application. That, too, is named "JWatcher_V1.0". Select it, and do exactly the same thing you did before with the installer: replace the binary inside with a copy of JavaApplicationStub.
You should now be able to run it.

My Catalog - "Can't open Database" error

After being able to open Photoshop Album Starter Edition successfully and without incident several months ago, one day I received this error:
"Problem opening the Catalog named "My Catalog". Another user or application may have the catalog open, or one or more files may be missing, out of date, or damaged. [Microsoft] [ODBC Microsoft Access 97 Driver] can't open database 'unknown'. It may not be a database that your application recognizes or the file may be corrupt. Attempt to compact and recover this catalog then try again? - OK or Cancel"
If I choose OK, then I get another error:
"Catalog Recovery Incomplete - A problem was encountered during catalog recovery. Your catalog may be ok, but if you experience problems with it that can't be resolved through the Reover Catalog option or restarting your computer system you may need to restore this catalog from a backup. - OK"
That goes to a 3rd error message:
"Unable to open "My Catalog because it is damaged. Please choose: Open existing or Create a new catalog named My Catalog-1.psa"
If I choose existing, it goes to the folder where My Catalog is stored, I can click it, and then I receive the first message. If I choose create a new catalog, it does, then gives me the first error message. PSA SE never opens, but the photo downloader appears in my Task bar Notification area, and I can Launch, Enable/Disable or Exit that program. If I try to acquire a photo, I end up with the same first error message.
I've seen the other threads that address what may be close to this issue, and I've done all the fixes suggested, short of reinstalling WindowsXP, which I'd rather avoid, but I've had no luck - I still get the exact same error messages.
I am using Office 97, including Access, Word, Excel, etc. but I'm not having any issues with those. I'm also using Pagemaker 7.0 and no issues there related to a catalog or database. I did have at one time a trial copy of Illustrator, and this problem started occurring after that trial was expired. I've since uninstalled Illustrator, done all the fixes suggested here, deleted the My Catalog files, restarted, uninstalled and re-installed PSA SE3.2, and still it cannot 'see' My Catalog.
Any other suggestions (besides upgrading to Office-this decade, which I would love, but employer hasn't made that leap yet.)? TIA
Tracey

No, no multiple users on this machine, or on that application. Both are located on the C: drive of a computer with intranet and internet access.
Could it have anything to do with the application Microsoft Access? [Microsoft ODBC Access97 driver] is named in the first error message. Access97 was always on this computer, but it wasn't actually put into use until about 6-8 months ago, and it was sometime after I started using it that I could no longer open PSA-SE. Connection? Fixable?

After windows 8.1 update catalog can not open due to unexpected error

after my windows update the lightroom app will not open. i'm not tech savvy at all and don't know what to do to have this taken care of and being that I bought the product 112 days ago and not 90 or less I cannot speak to someone directly to help with the issue please help anyone if you can.

Try holding down the Ctrl (Win) / Command (Mac) key while launching Lightroom. This should get you the Catalog Manager. From here, create a new catalog and see if that opens. If it does, import your old catalog into it and it will most likely continue to work after that.

Error. Lightroom catalog can't open

Similar Messages

Maybe you are looking for