Error list (solman 4 loading)

hi this is errors from different logs created when loading SOLUTION MANAGER 4
PLZ HELP ME
Install mode does not apply to a Terminal server configured for remote administration.
Could not get thread token.
Last error: 1008. I assume that no thread token exists.
Got process token.
Privileges:
Privilege SeBackupPrivilege, display name: Back up files and directories, not enabled.
Privilege SeRestorePrivilege, display name: Restore files and directories, not enabled.
Privilege SeShutdownPrivilege, display name: Shut down the system, not enabled.
Privilege SeDebugPrivilege, display name: Debug programs, not enabled.
Privilege SeAssignPrimaryTokenPrivilege, display name: Replace a process level token, not enabled.
Privilege SeIncreaseQuotaPrivilege, display name: Adjust memory quotas for a process, not enabled.
Privilege SeSystemEnvironmentPrivilege, display name: Modify firmware environment values, not enabled.
Privilege SeChangeNotifyPrivilege, display name: Bypass traverse checking, enabled.
Privilege SeRemoteShutdownPrivilege, display name: Force shutdown from a remote system, not enabled.
Privilege SeTcbPrivilege, display name: Act as part of the operating system, not enabled.
Privilege SeUndockPrivilege, display name: Remove computer from docking station, not enabled.
Privilege SeSecurityPrivilege, display name: Manage auditing and security log, not enabled.
Privilege SeTakeOwnershipPrivilege, display name: Take ownership of files or other objects, not enabled.
Privilege SeLoadDriverPrivilege, display name: Load and unload device drivers, not enabled.
Privilege SeManageVolumePrivilege, display name: Perform volume maintenance tasks, not enabled.
Privilege SeSystemProfilePrivilege, display name: Profile system performance, not enabled.
Privilege SeImpersonatePrivilege, display name: Impersonate a client after authentication, enabled.
Privilege SeSystemtimePrivilege, display name: Change the system time, not enabled.
Privilege SeCreateGlobalPrivilege, display name: Create global objects, enabled.
Privilege SeProfileSingleProcessPrivilege, display name: Profile single process, not enabled.
Privilege SeIncreaseBasePriorityPrivilege, display name: Increase scheduling priority, not enabled.
Privilege SeCreatePagefilePrivilege, display name:
Create a pagefile, not enabled.
File not found: [C:/DOCUME1/ADMINI1/LOCALS~1/Temp/sapinst_exe.3240.1176320585/msvcp71.dll].
INFO 2007-04-12 01:15:41
File not found: [C:/DOCUME1/ADMINI1/LOCALS~1/Temp/sapinst_exe.3240.1176320585/msvcr71.dll].
File not found: [C:/DOCUME1/ADMINI1/LOCALS~1/Temp/sapinst_exe.3240.1176320585/msvcp71.dll].
INFO       2007-04-12 01:15:41
           CJSlibModule::writeInfo_impl()
File not found: [C:/DOCUME1/ADMINI1/LOCALS~1/Temp/sapinst_exe.3240.1176320585/msvcr71.dll].
F:/Solution Manager & ECC6/BS\IM_WINDOWS_I386/NT/I386/sapinstevents.dll not found.
TRACE      [iaxxejsexp.cpp:188]
           EJS_Installer::writeTraceToLogBook()
./sapinstevents.dll not found.
TRACE      [iaxxejsexp.cpp:188]
           EJS_Installer::writeTraceToLogBook()
2007-04-12 01:16:05.937 STACK factor not empty; value : Java
Loading of 'SAPSDIC'
import package: OK
Import Monitor jobs: running 0, waiting 17, completed 1, failed 0, total 18.12:46 PM 4/24/200712:46 PM 4/24/200712:46 PM 4/24/200712:46 PM 4/24/200712:46 PM 4/24/200712:46 PM 4/24/200712:46 PM 4/24/200712:46 PM 4/24/200712:46 PM 4/24/200712:46 PM 4/24/200712:46 PM 4/24/200712:46 PM 4/24/200712:46 PM 4/24/200712:46 PM 4/24/200712:46 PM 4/24/200712:46 PM 4/24/200712:46 PM 4/24/200712:46 PM 4/24/200712:46 PM 4/24/200712:46 PM 4/24/200712:46 PM 4/2

Hi, your OS 32 bit , i'm correct?
The main error are
D:Solman - 4.0Solman_Export
you use the blank (spaces) in the directory name for installation files, it's not allowed.
change to D:Solman_4.0Solman_Export (change to all other DVD's paths on your hard disk to )
after restart the installation from the beginning.
https://www.sdn.sap.com/irj/scn/wiki?path=/display/home/rulesofEngagement
Regards.

Similar Messages

After upgrading to 3.6.8 none of the plugins load even though there are updates available. The updates will not install and even though the error states to look at the console error log there are no errors listed in the log.

After upgrading to 3.6.8 none of the extensions load even though there are updates available. The updates will not install and even though the error states to look at the console error log there are no errors listed in the log. All extensions are listed in Addons>Extensions.
== This happened ==
Every time Firefox opened
== Upgrading to newer Firefox version (3.6.8)

I have been having the same issue for the last two weeks. No real indication as to why it ever began other than I had turned off my router and Airport Extreme Base Station off for a weekend while I was away from my place.
iPad, iPhone, iPod Touch, all have no issues at all with my Airport Extreme Base Station. Can stay connected throughout my living room, bathroom, bedroom, no issues whatsoever.
My 5 month old MacBook Pro 2.66 GHz Core i7 Airport is sometimes perfect, able to connect, DHCP, and browse without issue. Then, for no reason, I won't be able to join my wireless network, or when I can join, I can't pick up an IP address. And then it will connect, pick up and IP, and then it won't browse. No real rhyme or reason to when this will happen, or when it works.
I thought that it was an issue with my MacBook Pro, but then my sister visited with her brand new MacBook Pro 2.26 Intel Core 2 Duo, and while a month ago she was able to connect, DHCP, and browse without issue, this weekend she had all of the same issues I was having.
My XBOX 360 and MacBook Pro have absolutely no issues with the wired connection. Only my WAN seems to have this issue.
Did you ever find anything more to this?

What does "Error 10" mean? "An error occurred while loading your project. 10"

Does anyone know what "Error 10" means? For the first time, I'm getting a message that says, "An error occurred while loading your project. 10". I'm getting this message when I try to open a project that I created yesterday.
I'm using Adobe Premiere 6 on a Windows 7 machine. I have over 20 gigs of open space on the drive with all the project and support files. And this machine with 2 gigs of RAM never has a problem opening other similar Premeire project files with even more still images plugged in.
All of my Premiere project files have always opened with no problem. A similar file that this project file was created from with all the same base elements still opens with no problem.
This file almost finishes the "Loading Project - checking files..." process, but then I get the error message.
I had also saved a duplicate backup file for the project in question and it will not open either, so I believe that rules out a corrupt file... it is only this one project that I created yesterday that will not open. This project file is only about 5.7 megabytes in size.
This file has many still images plugged in to it, but all the same images are plugged in to another base file that still opens correctly.
I've also tried closing all other apps to save memory but I still get the error. I've also tried opening this problem file from within the application and I still get the same error message.
I read some troubleshooting information on the Adobe website about files that give error messages that will not open and it recommended adjusting the size of the virtual memory paging file in the system settings to twice the amount of RAM that is installed instead of being on the automatic setting, so I followed the instruction verbatim and restarted my machine and I still get the error message.
I've also read other troubleshooting info on the Adobe site that recommends to "delete the application preferences file" and "recreate the plugin cache file", but I'm not sure if "Error 10" indicates that those things are the correct procedures to use.
I could re-create this project file, but it has many tricky cutting and motion setting edits that will be difficult to reproduce and it took me a full day to create this project file.
Also, yesterday before initially closing this file, I was able to successfully render a test version to an AVI file and that video file plays fine, but neither the original project file nor the duplicate will open... I'm always getting the "An error occurred while loading your project. 10" after the file almost finishes the "Loading Project - checking files..." process... it almost finishes opening but then I get the error message.
Thanks for any input on this problem. You can see the error message screenshot below.
digi

Thanks Bill... me too.
After writing to Dennis Radeke on an Adobe.com blog about this and getting his very limited response, I wrote to him quoting something I read on the wiki page that you sent me the link to...
Adobe blog:
http://http://blogs.adobe.com/genesisproject/2009/11/having_weird_behavior_with_an.html#co mment-2701
Wiki page link that you gave me:
http://premierepro.wikia.com/wiki/FAQ:How_do_I_recover_a_corrupt_project%3F
Here's what my response today was...
Thanks for your reply DR.
My old version of Premiere 6 works perfectly on Windows 7. I’ve created over a thousand different Premiere project files on this 5 year-old PC that was updated to Windows 7 last year.
All of my other Premiere 6 files open and maintain their original editability and all the features in this ancient version of Premiere work very well.
I own and use mostly Mac machines but I have one 5 year-old PC with a 160 gig hard drive with Windows 7 that I run Premiere 6 on because it’s a thousand dollar program that I had from 10 years ago that I didn’t want to repurchase. Buying a newer PC 5 years ago was far less expensive than buying a new copy of Premiere. Some people seem to think, “Wow, just buy a new version of the software for a thousand dollars and a new computer with a 5 Terabyte hard drive.”, but that isn’t always the reality of some peoples financial situation.
With 20 gigs of open HD space, all of my previous, even more complex Premiere 6 files still open and edit just fine. It is only this one file that I created Thursday that won’t re-open after closing it for the first time. Since the backup copy of that file won’t open either, and all the support files open, play and work in other previous project files, I’m thinking that there is some glitch that happened when saving this file that is corrupting it now, making it unable to be re-opened.
Based on prior advice on multiple topics about Premiere 6 from people on the Adobe forum who use only newer versions of Premiere, most information that applies to the brand new Premiere Pro CS5 still seems to apply to the old Premiere 6.
I found that holding down Shift-Option while opening Premiere 6 trashes the preferences file. This became my work around since I can’t locate the preferences file based on your path noted (in your blog) nor via the other prefs file path published on the Adobe website.
But unfortunately, trashing the prefs file, resetting the plugin cache file, increasing the virtual memory paging file size, importing the problem project file in to a new project, nor anything else is working to allow this file to open.
Now I’m looking in to XML:Wrench to see if that can find the corruption in this file, but I’ve had a malware warning from one download source and the xmlwrench.com website says their download is only a demo version, but no price is listed… this seems somewhat strange and possibly deceptive.
But I read something on an Premiere Pro wiki page , quoted below, at this URL, that seems to be pertinent, and though my version of Premiere may be ancient, it seems that, according to this user’s concerns, Adobe is still having problems with current versions of Adobe software creating corrupt files…
http://premierepro.wikia.com/wiki/FAQ:How_do_I_recover_a_corrupt_project%3F
QUOTE:
“Can someone please advise – why on EARTH we should have to download XML Wrench and manually fix a corrupt Adobe project??? This is something common to all the Adobe “Support” forums on issues like this, and the many others that plague Adobe’s product (and I’m not being a mindless troll – I’ve been forced to use it for years so I do know the usability and other issues it has): it seems that people are excited because they’ve found a “fix” (which is more like a work-around) – purely because they’re understandably ecstatic that all their hard work isn’t comPLETEly lost.
However, Adobe should be making sure their product isn’t so buggy! This issue should be fixed (as just one example). Adobe should be finding out what causes the corruption in the first place and fixing it. And whether it’s some other codec on the system that’s caused it is no excuse – their software should have better error management built into it. I’ve seen other issues where an Adobe support representative has happily replied: “oh, that’s a known issue since version [3 versions back] – don’t worry, most users are aware of the work around for it: just select and move all of the items in your timeline each time you open the project and you’ll be fine!”
I’m sorry to rant on – but can some other users please explain the above to me? (i.e. why aren’t more people annoyed about this and complaining to Adobe to fix these things).”
UNQUOTE
All of this coming from an experienced user of Adobe products complaining about needing XML:Wrench to fix corrupt Adobe files seems relevant.
In addition, why does no one, including the Adobe knowledge base, have any info about what “An error occurred while loading your project. 10″ means?… why isn’t there a database that identifies Adobe error numbers by the simple number itself? The only info I was able to find identifying “Error 10″ on the Adobe site was a software installation error, not a project loading error.
Now I find myself chasing a clean download of XML:Wrench in order to hopefully fix this corrupt file. Whether I’m using Premiere 6 on a 160 gig hard drive with 20 gigs of open space or Premiere Pro CS5 on a 5 Terabyte hard drive with 3 Terabytes of open space, the problems, according to other users, seem to be the same as ever with corrupt Adobe Premiere files, based on what I’ve been reading across the internet.

Short dump error for delta load to 0CFM_C10 via 0CFM_DELTA_POSITIONS flow

hi all,
i am getting short dump error for delta load to 0CFM_C10 via 0CFM_DELTA_POSITIONS flow.
not able to figure out the actual issue and how to solve it.
can anyone suggest?
below is the details of the short dump
Short text
    Exception condition "UNKNOWN_TRANSCAT" raised.
What happened?
    The current ABAP/4 program encountered an unexpected
    situation.
What can you do?
    Note down which actions and inputs caused the error.
    To process the problem further, contact you SAP system
    administrator.
    Using Transaction ST22 for ABAP Dump Analysis, you can look
    at and manage termination messages, and you can also
    keep them for a long time.
Error analysis
    A RAISE statement in the program "CL_SERVICE_TRG================CP" raised the
     exception
    condition "UNKNOWN_TRANSCAT".
    Since the exception was not intercepted by a superior
    program, processing was terminated.
    Short description of exception condition:
    For detailed documentation of the exception condition, use
    Transaction SE37 (Function Library). You can take the called
    function module from the display of active calls.
How to correct the error
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "RAISE_EXCEPTION" " "
    "CL_SERVICE_TRG================CP" or "CL_SERVICE_TRG================CM003"
    "SORT_TRANSACTIONS"
    or
    "CL_SERVICE_TRG================CP" "UNKNOWN_TRANSCAT"
    or
    "SBIE0001 " "UNKNOWN_TRANSCAT"
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
       To save the description, choose "System->List->Save->Local File
    (Unconverted)".
    2. Corresponding system log
       Display the system log by calling transaction SM21.
       Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
    (Unconverted)".
    3. If the problem occurs in a problem of your own or a modified SAP
    program: The source code of the program
       In the editor, choose "Utilities->More
    Utilities->Upload/Download->Download".
    4. Details about the conditions under which the error occurred or which
    actions and input led to the error.

Hi,
It seems like some routine are there and check your rotines , transformation etc.
Regards
sivaraju

System error 988 whlie loading the LabView eun-time engine (C:\Program file\....\\lvrt.dll)

I am trying to use NI devices with Lazarus (there is no pascal section, so I post here).
When I try to run my application:
DAQmxBaseCreateTask('TaskHandle', TaskHandle);
DAQmxBaseCreateAIVoltageChan(taskHandle,'Dev1/ai0','',DAQmx_Val_Cfg_Default,-10.0,10.0,DAQmx_Val_Volts,'');
I get the following error message:
„System error 988 while loading the LabView eun-time engine (C:\Program file\....\\lvrt.dll)
nidaqmxbaselv requires a version 2010 (or compatible) LabView run-time engine. Please contact the vendor of nidaqmxbaselv to correct this problem.“
I installed LabView run-time engine 2012, but I still get the same error.
Then I tried to install LabView run-time engine 2010- the same result.
I removed LabView run-time engine 2012- same result.
I tried to install LabView run-time engine 2010 again (since I did not see it in the add/remove list)- then I noticed, that the installer shows „A newer version is already installed".
What shall I do?

Hi,
   Can I ask the same question too?
   I am using
   Windows 7 sp1 x64
   Visual Studio 2010 pro
   NI USB-6009
   ni-daqmx base 3.4.5
I created a empty win-32 console project and putted the ANSI C Example program: acquireNScans.c with the include file and lib file of nidaqmxbase in the same folder. I added this line on the top of the source code #pragma comment(lib,"nidaqmxbase.lib"), built without any error. When I tried to run it, I got this same message.
  I tried changing to shared dll mfc and delaying linking lvrt.dll, but did not work.
  Looking forward to your reply.
all the best.

Error in sql loader

hi,
when i am trying to load data using sql loader i come across the following errors and i was unable to load data into my staging tables.
please explain me what are they and how to rectify them.
SQL*Loader-524: partial record found at end of datafile (D:\oracle\prodappl\fnd\11.5.0\bin\sri3.ctl)
Program exited with status 3
SQL*Loader-500: Unable to open file (D:\oracle\prodappl\fnd\11.5.0\bin\sr2.ctl)
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
please tell me where can i get complete information on errors occured during loading of data.
please tell me whether there is any list of common errors encountered in sql*oader
thanks in advance
siddam
Message was edited by:
siddam
null

Both of datafile and control file should have line feed characters at the end.
Check this site :
http://radio.weblogs.com/0108008/stories/2003/04/11/experienceWithSqlLoader.html

"Error occurs when loading transaction data from other model" - BW loading into BPC

Hi Experts,
I'm having a problem with my data loading from BW, using the standard Load InfoProvider Selections data manager package.
If I run for a period without data it succeeds (with warning) but if there is data to be extracted I get the following error:
Task name CONVERT:
No 1 Round:
Error occurs when loading transaction data from other model
model: AIACONS. Package status: ERROR
As it runs ok when there isn't data it appears there is something preventing the movements of data out of the cube itself, rather then a validation issue.
Has anyone encountered similar or have any ideas as to the problem?
Best,
Chris

Hi Vadim,
It's not specific to the transformation file as I have tried with others for the same BW cube and get the same result.
We get a warning when we try and validate the transformation file:
"Error occurs when loading transaction data from other model".
This only appears in the validation pop up and doesn't throw up any warnings about the transformation file itself. The validation log says:
Validate and Process Transformation File Log
Log creation time
3/7/2014 16:09
The result of validation of the
conversion file
SUCCESS
The result of validation of the
conversion file with the data file
FAIL
Validation Result
Validation Option
ValidateRecords = NO
Message
Error occurs when loading transaction data from other model
Reject List
I can't find any errors anywhere else.
Best,
Chris

[SOLVED] error occured while loading or saving config information

When I try to launch applications from my menu it takes ages to appear and I get the error:
'an error occured while loading or saving configuration information for 'application name'. Some of your configuration settings may not work properly'
in the details section I get:
'Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or that you have NFS locks due to a system crash. See (a website for gnome's gconf) for details.'
I don't understand this as I don't use gnome, I have openbox.
any help appreciated.
List of affected apps:
firefox
thunderbird
terminator
Apps that load unusually slow:
Thunar
Apps that do nothing:
Banshee
EDIT: If I cannot get this fixed by the end of the week I will have to go back to ubuntu as I need this machine working.
Last edited by llawwehttam (2010-02-09 20:30:52)

Cyrusm wrote:
I think I may have found a solution,
can you print the output of
ls -la ~/ | grep .dbus
apparently this problem can happen if ~/.dbus is owned by root.
to fix it AS ROOT (or sudo)
chown -R $USER:users ~/.dbus
here's my source, there are a few things in here you could try as well.
http://ubuntuforums.org/archive/index.php/t-780179.html
Hahaha, thank you so much.
It was owned by root so I have now fixed that.
It was my own stupid fault then running a command as root that should have been run as a user?
I will never forget this, the embarrassment is killing me..... lol

Error: Failed to load script file; java.lang.ArrayIndexOutOfBound.Exception: 3184

Script editor was working find when I last used it last week. Tried to open a script today to make some changes and now I'm getting this error message. I have uninstalled and re-installed editor, checked the compatibility mode and it wont open the script. any ideas out there what the problem could be? need some trouble shooting help.
Error:
failed to load script file: java.lang.ArrayIndexOutOfBound.Expception: 3184
Thanks
Lora

Hmmm....   I haven't seen that, but I can tell you what I would do if I were you. This is kind of drastic, but the alternative may be a workstation reimage.
Open the windows control panel, and open the add/remove programs snap in.
Uninstall the CRS editor.
Uninstall all the JRE instances you have. They may be listed as something like Java (TM) update....   or they may appear as J2SE Runtime....   Check in the J's (it's alphabetical) and uninstall all of them.
Reboot the machine.
Download and reinstall Java 1.6.0.17   (This is what's running on my workstation right now, and it works with the editor).
Reinstall the CRS editor
Reboot the machine
Try it and see if it behaves. If it doesn't, you may need to rebuild the whole thing.

Depmod error: failed to load symbols from ...

Hello,
I installed today arch and the installation went well except nvidia-340xx install gave me this error messsage; now, X wont start.
depmod ERROR: failed to load symbols from /lib/modules/3.16.4-1-ARCH/kernel/drivers/usb/wusbcore/wusbcore.ko.gz invalide argument
Any idea?

Scimmia wrote:failed to load symbols doesn't sound good. It may need a reinstall of the kernel if something got corrupted on disk.
This is exactly what i have done and the error message went away.
But at boot still hangs.
This is the Xorg.1.log file:
[ 46.713]
X.Org X Server 1.16.1
Release Date: 2014-09-21
[ 46.713] X Protocol Version 11, Revision 0
[ 46.714] Build Operating System: Linux 3.16.1-1-ARCH x86_64
[ 46.714] Current Operating System: Linux myhost 3.16.4-1-ARCH #1 SMP PREEMPT Mon Oct 6 08:22:27 CEST 2014 x86_64
[ 46.714] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=33a28745-d878-4b98-a9ab-dee48b53a9b2 rw quiet
[ 46.714] Build Date: 21 September 2014 10:53:13AM
[ 46.714]
[ 46.714] Current version of pixman: 0.32.6
[ 46.715] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 46.715] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 46.716] (==) Log file: "/var/log/Xorg.1.log", Time: Thu Oct 16 15:26:17 2014
[ 46.717] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 46.717] (==) No Layout section. Using the first Screen section.
[ 46.717] (==) No screen section available. Using defaults.
[ 46.717] (**) |-->Screen "Default Screen Section" (0)
[ 46.717] (**) | |-->Monitor "<default monitor>"
[ 46.717] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 46.717] (==) Automatically adding devices
[ 46.717] (==) Automatically enabling devices
[ 46.717] (==) Automatically adding GPU devices
[ 46.717] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 46.717] Entry deleted from font path.
[ 46.718] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 46.718] Entry deleted from font path.
[ 46.718] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 46.718] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 46.718] Entry deleted from font path.
[ 46.718] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 46.718] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 46.718] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 46.718] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 46.718] (II) Loader magic: 0x818d80
[ 46.718] (II) Module ABI versions:
[ 46.718] X.Org ANSI C Emulation: 0.4
[ 46.718] X.Org Video Driver: 18.0
[ 46.718] X.Org XInput driver : 21.0
[ 46.718] X.Org Server Extension : 8.0
[ 46.725] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c2
[ 46.725] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 46.726] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 8 paused 1
[ 46.726] (EE) Error systemd-logind returned paused fd for drm node
[ 46.726] (II) systemd-logind: releasing fd for 226:0
[ 46.729] (--) PCI:*(0:1:0:0) 10de:0404:0000:0000 rev 161, Mem @ 0xfa000000/16777216, 0xd0000000/268435456, 0xf8000000/33554432, I/O @ 0x0000df00/128, BIOS @ 0x????????/131072
[ 46.729] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 46.729] (II) LoadModule: "glx"
[ 46.730] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 46.775] (II) Module glx: vendor="NVIDIA Corporation"
[ 46.775] compiled for 4.0.2, module version = 1.0.0
[ 46.775] Module class: X.Org Server Extension
[ 46.775] (II) NVIDIA GLX Module 340.46 Wed Sep 24 13:54:14 PDT 2014
[ 46.775] (==) Matched nouveau as autoconfigured driver 0
[ 46.775] (==) Matched nvidia as autoconfigured driver 1
[ 46.775] (==) Matched nv as autoconfigured driver 2
[ 46.775] (==) Matched modesetting as autoconfigured driver 3
[ 46.775] (==) Matched fbdev as autoconfigured driver 4
[ 46.775] (==) Matched vesa as autoconfigured driver 5
[ 46.775] (==) Assigned the driver to the xf86ConfigLayout
[ 46.775] (II) LoadModule: "nouveau"
[ 46.775] (WW) Warning, couldn't open module nouveau
[ 46.775] (II) UnloadModule: "nouveau"
[ 46.775] (II) Unloading nouveau
[ 46.775] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 46.775] (II) LoadModule: "nvidia"
[ 46.775] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 46.776] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 46.776] compiled for 4.0.2, module version = 1.0.0
[ 46.776] Module class: X.Org Video Driver
[ 46.776] (II) LoadModule: "nv"
[ 46.777] (WW) Warning, couldn't open module nv
[ 46.777] (II) UnloadModule: "nv"
[ 46.777] (II) Unloading nv
[ 46.777] (EE) Failed to load module "nv" (module does not exist, 0)
[ 46.777] (II) LoadModule: "modesetting"
[ 46.777] (WW) Warning, couldn't open module modesetting
[ 46.777] (II) UnloadModule: "modesetting"
[ 46.777] (II) Unloading modesetting
[ 46.777] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 46.777] (II) LoadModule: "fbdev"
[ 46.777] (WW) Warning, couldn't open module fbdev
[ 46.777] (II) UnloadModule: "fbdev"
[ 46.777] (II) Unloading fbdev
[ 46.777] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 46.777] (II) LoadModule: "vesa"
[ 46.777] (WW) Warning, couldn't open module vesa
[ 46.778] (II) UnloadModule: "vesa"
[ 46.778] (II) Unloading vesa
[ 46.778] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 46.778] (II) NVIDIA dlloader X Driver 340.46 Wed Sep 24 13:34:03 PDT 2014
[ 46.778] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 46.778] (++) using VT number 2
[ 46.778] (--) controlling tty is VT number 2, auto-enabling KeepTty
[ 46.778] (II) Loading sub module "fb"
[ 46.778] (II) LoadModule: "fb"
[ 46.778] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 46.778] (II) Module fb: vendor="X.Org Foundation"
[ 46.778] compiled for 1.16.1, module version = 1.0.0
[ 46.778] ABI class: X.Org ANSI C Emulation, version 0.4
[ 46.778] (WW) Unresolved symbol: fbGetGCPrivateKey
[ 46.778] (II) Loading sub module "wfb"
[ 46.778] (II) LoadModule: "wfb"
[ 46.778] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 46.779] (II) Module wfb: vendor="X.Org Foundation"
[ 46.779] compiled for 1.16.1, module version = 1.0.0
[ 46.779] ABI class: X.Org ANSI C Emulation, version 0.4
[ 46.779] (II) Loading sub module "ramdac"
[ 46.779] (II) LoadModule: "ramdac"
[ 46.779] (II) Module "ramdac" already built-in
[ 46.779] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 46.779] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 46.779] (==) NVIDIA(0): RGB weight 888
[ 46.779] (==) NVIDIA(0): Default visual is TrueColor
[ 46.779] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 46.780] (**) NVIDIA(0): Enabling 2D acceleration
[ 46.904] (II) NVIDIA(0): Display (Acer AL2016W (DFP-0)) does not support NVIDIA 3D
[ 46.904] (II) NVIDIA(0): Vision stereo.
[ 46.904] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20130102)
[ 46.906] (II) NVIDIA(0): NVIDIA GPU GeForce 8400 GS (G84) at PCI:1:0:0 (GPU-0)
[ 46.906] (--) NVIDIA(0): Memory: 524288 kBytes
[ 46.906] (--) NVIDIA(0): VideoBIOS: 60.84.68.00.00
[ 46.906] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 46.909] (--) NVIDIA(0): Valid display device(s) on GeForce 8400 GS at PCI:1:0:0
[ 46.909] (--) NVIDIA(0): CRT-0
[ 46.909] (--) NVIDIA(0): CRT-1
[ 46.909] (--) NVIDIA(0): TV-0
[ 46.909] (--) NVIDIA(0): Acer AL2016W (DFP-0) (boot, connected)
[ 46.909] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 46.909] (--) NVIDIA(GPU-0): CRT-1: 400.0 MHz maximum pixel clock
[ 46.909] (--) NVIDIA(GPU-0): TV-0: 400.0 MHz maximum pixel clock
[ 46.909] (--) NVIDIA(0): Acer AL2016W (DFP-0): Internal TMDS
[ 46.909] (--) NVIDIA(GPU-0): Acer AL2016W (DFP-0): 330.0 MHz maximum pixel clock
[ 46.909] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 46.909] (**) NVIDIA(0): device Acer AL2016W (DFP-0) (Using EDID frequencies has
[ 46.909] (**) NVIDIA(0): been enabled on all display devices.)
[ 46.914] (==) NVIDIA(0):
[ 46.914] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 46.914] (==) NVIDIA(0): will be used as the requested mode.
[ 46.914] (==) NVIDIA(0):
[ 46.914] (II) NVIDIA(0): Validated MetaModes:
[ 46.914] (II) NVIDIA(0): "DFP-0:nvidia-auto-select"
[ 46.914] (II) NVIDIA(0): Virtual screen size determined to be 1680 x 1050
[ 46.951] (--) NVIDIA(0): DPI set to (99, 98); computed from "UseEdidDpi" X config
[ 46.951] (--) NVIDIA(0): option
[ 46.951] (--) Depth 24 pixmap format is 32 bpp
[ 46.951] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[ 46.955] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 46.955] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 46.955] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 46.955] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 46.955] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 46.955] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 46.955] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 46.955] (II) NVIDIA(0): Config Options in the README.
[ 46.958] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select"
[ 47.037] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 47.037] (==) NVIDIA(0): Backing store enabled
[ 47.037] (==) NVIDIA(0): Silken mouse enabled
[ 47.038] (==) NVIDIA(0): DPMS enabled
[ 47.038] (II) Loading sub module "dri2"
[ 47.038] (II) LoadModule: "dri2"
[ 47.038] (II) Module "dri2" already built-in
[ 47.038] (II) NVIDIA(0): [DRI2] Setup complete
[ 47.038] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 47.038] (--) RandR disabled
[ 47.045] (II) Initializing extension GLX
[ 47.102] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 47.102] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 47.102] (II) LoadModule: "evdev"
[ 47.102] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 47.102] (II) Module evdev: vendor="X.Org Foundation"
[ 47.102] compiled for 1.16.0, module version = 2.9.0
[ 47.102] Module class: X.Org XInput Driver
[ 47.102] ABI class: X.Org XInput driver, version 21.0
[ 47.103] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 28 paused 0
[ 47.103] (II) Using input driver 'evdev' for 'Power Button'
[ 47.103] (**) Power Button: always reports core events
[ 47.103] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 47.103] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 47.103] (--) evdev: Power Button: Found keys
[ 47.103] (II) evdev: Power Button: Configuring as keyboard
[ 47.103] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 47.103] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 47.103] (**) Option "xkb_rules" "evdev"
[ 47.103] (**) Option "xkb_model" "pc104"
[ 47.103] (**) Option "xkb_layout" "us"
[ 47.141] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 47.141] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 47.142] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 29 paused 0
[ 47.142] (II) Using input driver 'evdev' for 'Power Button'
[ 47.142] (**) Power Button: always reports core events
[ 47.142] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 47.142] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 47.142] (--) evdev: Power Button: Found keys
[ 47.142] (II) evdev: Power Button: Configuring as keyboard
[ 47.142] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event2"
[ 47.142] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 47.142] (**) Option "xkb_rules" "evdev"
[ 47.142] (**) Option "xkb_model" "pc104"
[ 47.142] (**) Option "xkb_layout" "us"
[ 47.142] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 47.142] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 47.143] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 30 paused 1
[ 47.143] (EE) Error systemd-logind returned paused fd for drm node
[ 47.143] (II) systemd-logind: releasing fd for 226:0
[ 47.144] (II) config/udev: Adding input device Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) (/dev/input/event1)
[ 47.144] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Applying InputClass "evdev pointer catchall"
[ 47.144] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 31 paused 0
[ 47.144] (II) Using input driver 'evdev' for 'Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)'
[ 47.144] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): always reports core events
[ 47.144] (**) evdev: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Device: "/dev/input/event1"
[ 47.144] (--) evdev: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Vendor 0x45e Product 0x40
[ 47.144] (--) evdev: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Found 3 mouse buttons
[ 47.144] (--) evdev: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Found scroll wheel(s)
[ 47.144] (--) evdev: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Found relative axes
[ 47.144] (--) evdev: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Found x and y relative axes
[ 47.144] (II) evdev: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Configuring as mouse
[ 47.144] (II) evdev: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Adding scrollwheel support
[ 47.144] (**) evdev: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): YAxisMapping: buttons 4 and 5
[ 47.144] (**) evdev: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 47.144] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.0/usb1/1-2/1-2:1.0/0003:045E:0040.0001/input/input1/event1"
[ 47.144] (II) XINPUT: Adding extended input device "Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)" (type: MOUSE, id 8)
[ 47.144] (II) evdev: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): initialized for relative axes.
[ 47.145] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): (accel) keeping acceleration scheme 1
[ 47.145] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): (accel) acceleration profile 0
[ 47.145] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): (accel) acceleration factor: 2.000
[ 47.145] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): (accel) acceleration threshold: 4
[ 47.145] (II) config/udev: Adding input device Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) (/dev/input/mouse0)
[ 47.145] (II) No input driver specified, ignoring this device.
[ 47.145] (II) This device may have been added with another device file.
[ 47.145] (II) config/udev: Adding input device HDA ATI SB Front Mic (/dev/input/event5)
[ 47.145] (II) No input driver specified, ignoring this device.
[ 47.145] (II) This device may have been added with another device file.
[ 47.146] (II) config/udev: Adding input device HDA ATI SB Rear Mic (/dev/input/event6)
[ 47.146] (II) No input driver specified, ignoring this device.
[ 47.146] (II) This device may have been added with another device file.
[ 47.146] (II) config/udev: Adding input device HDA ATI SB Line (/dev/input/event7)
[ 47.146] (II) No input driver specified, ignoring this device.
[ 47.146] (II) This device may have been added with another device file.
[ 47.146] (II) config/udev: Adding input device HDA ATI SB Line Out (/dev/input/event8)
[ 47.146] (II) No input driver specified, ignoring this device.
[ 47.146] (II) This device may have been added with another device file.
[ 47.147] (II) config/udev: Adding input device HDA ATI SB Front Headphone (/dev/input/event9)
[ 47.147] (II) No input driver specified, ignoring this device.
[ 47.147] (II) This device may have been added with another device file.
[ 47.147] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 47.147] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 47.147] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 32 paused 0
[ 47.147] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 47.147] (**) AT Translated Set 2 keyboard: always reports core events
[ 47.148] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 47.148] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 47.148] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 47.148] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 47.148] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 47.148] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[ 47.148] (**) Option "xkb_rules" "evdev"
[ 47.148] (**) Option "xkb_model" "pc104"
[ 47.148] (**) Option "xkb_layout" "us"
[ 47.148] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 47.148] (II) No input driver specified, ignoring this device.
[ 47.148] (II) This device may have been added with another device file.
[ 79.735] (II) evdev: AT Translated Set 2 keyboard: Close
[ 79.735] (II) UnloadModule: "evdev"
[ 79.735] (II) systemd-logind: releasing fd for 13:64
[ 79.763] (II) evdev: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Close
[ 79.763] (II) UnloadModule: "evdev"
[ 79.763] (II) systemd-logind: releasing fd for 13:65
[ 79.826] (II) evdev: Power Button: Close
[ 79.826] (II) UnloadModule: "evdev"
[ 79.826] (II) systemd-logind: releasing fd for 13:66
[ 79.853] (II) evdev: Power Button: Close
[ 79.853] (II) UnloadModule: "evdev"
[ 79.853] (II) systemd-logind: releasing fd for 13:67
[ 80.240] (II) NVIDIA(GPU-0): Deleting GPU-0
[ 80.242] (EE) Server terminated successfully (0). Closing log file.

I get the message "an error occurred while loading your favorite themes" and my persona rotator won't work. Please help?

I usually use the Persona Rotator using My Favorites as its themes to rotate. Lastely my rotater has not been working. I click on Tools, then Personas, then My Favorites and am asked to sign in to use my favorites with the Rotator. I follow all these steps and all seems to go fine, except my Persona Rotator does not rotate. Again I click on Tools, Personas, My Favorites and there is a message saying "an error occurred while loading your favorite themes" and therefore won't work. I don't know what the problem is or even exactly when it started, but it doesn't work and I'm most disappointed. Please fix or help me to fix it so I can enjoy my rotating themes again.

In order to switch to another persona that you had previously installed, do the following:
#Go to ''Tools'' and click ''Add-ons'' (or click the Firefox button at the top left and click ''Add-ons'').
#Switch to the ''Appearance'' tab. You should find your previously used personas in the list.
#Find the one you want to use and click the ''Enable'' button.
To uninstall the other ones you can click the ''Remove'' button on them and they'll be uninstalled instantly.

Preferences Error - Could not load Network

My dad just bought me a (used)) iBook g4 to replace my old one. It's running 10.3.9. It didn't come with a wireless card, so I ordered an Airport Extreme and installed it. I'm pretty sure I installed it correctly, I heard all the right clicks.
It booted up afterwards and the first thing I did was to run system update and try to get everything up to date. There were a ton. After it restarted, it no longer was connecting to our wirelesss network. I tried to go to System Preferences > Network and it responds with the error message "Preferences Error - Could Not Load Network" and nothing opens. Not to mention my DVD Player no longer works!
I have no idea what's at fault here- the airport extreme card, a bad update... And no idea how to fix it! Any help would be appreciated!

That it is not recognizing the retail (thanks cornelius) Leopard DVD is a problem indeed.
It should be plugged into the mains power, as the CD/DVD drive uses a lot of power when it is spinning.
Back to your About this Mac, does it mention that your optical drive can read DVDs?
On mine this info is located down the list under ATA which will have mentioned, CD
and in detail in the lower window
eg. Drive type: CD - RW/ DVD - ROM
if it shows the DVD-ROM part, that indicates it can read DVDs.
If it should be able to, then I wonder if the iBook's optical drive is OK. I could suggest loading another DVD into it, but you say DVD Player.app is missing.
What you could try is buying from a computer shop a CD drive cleaning kit, and following the instructions, run that through it. That is a fairy inexpensive exercise.
If it still does not recognize the DVD, and you had another Mac that you could connect by Firewire Target Disk mode, you could try installing leopard on it that way. But before that rather complex arrangement, try the disk cleaner. It might be a quick fix.

Persons plus reports 'an error occurred while loading your favourites'

Right clicking the personas+ icon, select 'My favourites'. Usually, instead of a list of favourites, I get a single entry 'An error occured while loading your favourites'.
Sometimes, for no apparent reason, it works.
Sometimes, it asks my to log in, so I do, but it doesn't seem to believe I've logged in - at least the menu doesn't change.

Hi thostanner,
There are quite a bit of addons listed in your troubleshooting profile that are related to sessions, cookies, and logins.
Where are you logging in with Persona plus? I am not sure if this is related: [https://bugzilla.mozilla.org/show_bug.cgi?id=920557]
If you temporarily disable: Personas Rotator 8.8 does the error go away?
Persona logins do timeout after a while as well.
In your settings, do you have History set to remember cookies until they expire?

Error: Could not load file or assembly 'Microsoft.Activities, Version=1.0.0.0

Hi,
I am using VS 2012 to create custom sequential workflows (2010 model). The workflows created in VS 2010 are working fine, but the workflow created in VS 2012 is throwing the error.
When the workflow is run, I am getting the below error:
Error:
Could not load file or assembly 'Microsoft.Activities, Version=1.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.
Stack Trace: at System.Reflection.RuntimeAssembly._nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, RuntimeAssembly locationHint, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean throwOnFileNotFound, Boolean
forIntrospection, Boolean suppressSecurityChecks) at System.Reflection.RuntimeAssembly.InternalLoadAssemblyName(AssemblyName assemblyRef, Evidence assemblySecurity, RuntimeAssembly reqAssembly, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean
throwOnFileNotFound, Boolean forIntrospection, Boolean suppressSecurityChecks) at System.Reflection.Assembly.Load(AssemblyName assemblyRef) at System.Workflow.Activities.Rules.SimpleRunTimeTypeProvider.get_ReferencedAssemblies() at System.Workflow.Activities.Rules.RuleValidation.DetermineExtensionMethods()
at System.Workflow.Activities.Rules.RuleValidation.get_ExtensionMethods() at System.Workflow.Activities.Rules.RuleValidation.GetNamedMethods(List`1 targetTypes, String methodName, BindingFlags methodBindingFlags) at System.Workflow.Activities.Rules.RuleValidation.ResolveMethod(Type
targetType, String methodName, BindingFlags methodBindingFlags, List`1 argumentExprs, ValidationError& error) at System.Workflow.Activities.Rules.MethodInvokeExpression.Validate(CodeExpression expression, RuleValidation validation, Boolean isWritten) at
System.Workflow.Activities.Rules.RuleExpressionWalker.Validate(RuleValidation validation, CodeExpression expression, Boolean isWritten) at System.Workflow.Activities.Rules.RuleValidation.ValidateConditionExpression(CodeExpression expression) at System.Workflow.Activities.Rules.RuleExpressionCondition.Validate(RuleValidation
validation) at System.Workflow.Activities.Rules.RuleConditionReference.Evaluate(Activity activity, IServiceProvider provider) at System.Workflow.Activities.IfElseActivity.Execute(ActivityExecutionContext executionContext) at System.Workflow.ComponentModel.ActivityExecutor`1.Execute(T
activity, ActivityExecutionContext executionContext) at System.Workflow.ComponentModel.FaultAndCancellationHandlingFilter.Execute(Activity activity, ActivityExecutionContext executionContext) at System.Workflow.ComponentModel.ActivityExecutorOperation.Run(IWorkflowCoreRuntime
workflowCoreRuntime) at System.Workflow.Runtime.Scheduler.Run()
How to fix this?
Thanks

Hi,
The machine in which the workflow was created is different from the machine it is deployed.
Which dll should be available? Is the dll not part of SharePoint 2013?
Is this part of workflow Manager?
Thanks

Preferences error: Could not load preference pane

Many times, when I attempt to load a Preference Pane, I receive the error message: "Preferences Error: Could not load [X] preference pane.” Clicking “OK” and reopening the preference pane succeeds.
Does anyone know what's going on here? I upgraded to Yosemite from a Snow Leopard installation, which I assume is part of the problem.
Using OS X 10.10.1, 2008 iMac

No dice.
Here's my EtreCheck report, if that helps anything:
EtreCheck version: 2.1.2 (105)
Report generated December 10, 2014 at 11:05:35 PM CST
Hardware Information: ℹ️
iMac (20-inch, Early 2008) (Verified)
iMac - model: iMac8,1
1 2.66 GHz Intel Core 2 Duo CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR2 SDRAM 800 MHz ok
BANK 1/DIMM1
2 GB DDR2 SDRAM 800 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
ATI Radeon HD 2600 Pro - VRAM: 256 MB
iMac 1680 x 1050
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 0:54:22
Disk Information: ℹ️
Hitachi HDE721064SLA360 disk0 : (640.14 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Jane's Brain (disk0s2) / : 627.01 GB (88.82 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
eDrive (disk0s4) <not mounted> : 12.13 GB
USB Information: ℹ️
Apple Inc. Built-in iSight
Mitsumi Electric Hub in Apple Extended USB Keyboard
Mitsumi Electric Apple Optical USB Mouse
Mitsumi Electric Apple Extended USB Keyboard
Apple Inc. iPhone
Newer Tech miniStack Classic 320.07 GB
S.M.A.R.T. Status: Verified
EFI (disk1s1) <not mounted> : 210 MB
Jane's Old Brain (disk1s2) /Volumes/Jane's Old Brain : 319.73 GB (13.24 GB free)
Western Digital My Passport 0740 500.07 GB
S.M.A.R.T. Status: Verified
SylerNet Adjunct (disk2s1) /Volumes/SylerNet Adjunct : 269.14 GB (63.71 GB free)
ADJUNCT FAT (disk2s2) <not mounted> : 230.93 GB
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Gatekeeper: ℹ️
Anywhere
Kernel Extensions: ℹ️
/Applications/Laucher from Herbie/Tools/Hardware/TemperatureMonitor.app
[not loaded] com.bresink.driver.BRESINKx86Monitoring (9.0) [Support]
/Applications/Porthole.app
[not loaded] com.Cycling74.driver.Soundflower (1.6.6 - SDK 10.6) [Support]
/Applications/Utilities/DiskWarrior.app
[not loaded] com.alsoft.Preview (4.1) [Support]
/Library/Application Support/VirtualBox
[loaded] org.virtualbox.kext.VBoxDrv (4.3.20) [Support]
[loaded] org.virtualbox.kext.VBoxNetAdp (4.3.20) [Support]
[loaded] org.virtualbox.kext.VBoxNetFlt (4.3.20) [Support]
[loaded] org.virtualbox.kext.VBoxUSB (4.3.20) [Support]
/Library/Extensions
[loaded] com.globaldelight.driver.BoomDevice (1.3 - SDK 10.9) [Support]
/System/Library/Extensions
[not loaded] com.palm.ClassicNotSeizeDriver (3.1) [Support]
Problem System Launch Agents: ℹ️
[failed] com.apple.CallHistoryPluginHelper.plist
[failed] com.apple.CallHistorySyncHelper.plist [Details]
[failed] com.apple.cmfsyncagent.plist [Details]
[failed] com.apple.coreservices.appleid.authentication.plist [Details]
[failed] com.apple.EscrowSecurityAlert.plist [Details]
[failed] com.apple.recentsd.plist [Details]
[failed] com.apple.SafariNotificationAgent.plist
[failed] com.apple.scopedbookmarkagent.xpc.plist
[failed] com.apple.security.cloudkeychainproxy.plist [Details]
[failed] com.apple.spindump_agent.plist [Details]
[failed] com.apple.syncdefaultsd.plist [Details]
[failed] com.apple.telephonyutilities.callservicesd.plist [Details]
[failed] com.apple.xpc.loginitemregisterd.plist
Problem System Launch Daemons: ℹ️
[failed] com.apple.awdd.plist [Details]
[failed] com.apple.ctkd.plist [Details]
[failed] com.apple.nehelper.plist [Details]
[failed] com.apple.softwareupdated.plist [Details]
[failed] com.apple.tccd.system.plist [Details]
[failed] com.apple.wdhelper.plist [Details]
[failed] com.apple.xpc.smd.plist [Details]
[failed] org.cups.cupsd.plist [Details]
Launch Agents: ℹ️
[running] com.micromat.TechToolProAgent.plist [Support]
[running] com.robohippo.HippoConnectAgent.plist [Support]
[not loaded] com.rosettastone.rosettastonedaemon.plist [Support]
[loaded] org.gpgtools.gpgmail.enable-bundles.plist [Support]
[loaded] org.gpgtools.gpgmail.patch-uuid-user.plist [Support]
[loaded] org.gpgtools.gpgmail.updater.plist [Support]
[running] org.gpgtools.Libmacgpg.xpc.plist [Support]
[loaded] org.gpgtools.macgpg2.fix.plist [Support]
[running] org.gpgtools.macgpg2.shutdown-gpg-agent.plist [Support]
[loaded] org.gpgtools.macgpg2.updater.plist [Support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
[loaded] com.barebones.authd.plist [Support]
[not loaded] com.barebones.textwrangler.plist [Support]
[loaded] com.bombich.ccc.plist [Support]
[running] com.bombich.ccchelper.plist [Support]
[loaded] com.charlessoft.pacifist.helper.plist [Support]
[loaded] com.ea.origin.ESHelper.plist [Support]
[running] com.freemacsoft.appcleanerd.plist [Support]
[loaded] com.klieme.TimeMachineScheduler.plist [Support]
[running] com.micromat.TechToolProDaemon.plist [Support]
[not loaded] com.robohippo.HippoConnectDaemon.plist [Support]
[loaded] org.gpgtools.gpgmail.patch-uuid.plist [Support]
[not loaded] org.virtualbox.startup.plist [Support]
User Launch Agents: ℹ️
[loaded] com.google.keystone.agent.plist [Support]
[running] com.spotify.webhelper.plist [Support]
[loaded] com.valvesoftware.steamclean.plist [Support]
[not loaded] net.brockerhoff.QuayMenu.plist [Support]
[not loaded] org.virtualbox.vboxwebsrv.plist [Support]
[loaded] uk.co.markallan.clamxav.freshclam.plist [Support]
[running] ws.agile.1PasswordAgent.plist [Support]
User Login Items: ℹ️
Bartender Application (/Applications/Bartender.app)
Flux Application (/Users/[redacted]/Applications/Flux.app)
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Dropbox Application (/Applications/Dropbox.app)
Dashboard KickStart Application (/Library/PreferencePanes/Dashboard KickStart.prefPane/Contents/Resources/Dashboard KickStart.app)
PastebotSync ApplicationHidden (/Users/[redacted]/Library/PreferencePanes/PastebotSync.prefPane/Contents/Resou rces/PastebotSync.app)
Quicksilver Application (/Applications/Laucher from Herbie/Accessories/Login Items/Quicksilver.app)
finderpop-daemon Application (/Users/[redacted]/Library/PreferencePanes/FinderPop.prefPane/Contents/Resource s/finderpop-daemon.app)
EvernoteHelper Application (/Applications/Evernote.app/Contents/Library/LoginItems/EvernoteHelper.app)
Synergy Application (/Applications/Synergy ƒ/Synergy Preferences.app/Contents/PreferencePanes/Synergy.prefPane/Contents/Helpers/Syne rgy.app)
ClamXav Sentry Application (/Applications/ClamXav.app/Contents/Resources/ClamXavSentry.app)
Messages Application (/Applications/Messages.app)
AppCleaner Helper Application (/Applications/Launcher/Utilities/System/AppCleaner.app/Contents/Library/LoginI tems/AppCleaner Helper.app)
Steam Application (/Applications/Steam.app)
EtreCheck Application (/Applications/EtreCheck.app)
Mail Application (/Applications/Mail.app)
MacUpdate Desktop ApplicationHidden (/Applications/MacUpdate Desktop.app)
Internet Plug-ins: ℹ️
Flip4Mac WMV Plugin: Version: 2.4.4.2 [Support]
FlashPlayer-10.6: Version: 16.0.0.235 - SDK 10.6 [Support]
QuickTime Plugin: Version: 7.7.3
Flash Player: Version: 16.0.0.235 - SDK 10.6 [Support]
NPRoblox: Version: 1, 2, 8, 25 - SDK 10.9 [Support]
Default Browser: Version: 600 - SDK 10.10
Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Support]
JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
User internet Plug-ins: ℹ️
Picasa: Version: 1.0 - SDK 10.4 [Support]
Safari Extensions: ℹ️
Buffer
Add To Amazon Wish List
Ghostery
Evernote Web Clipper
jollywallet cash back
Reading
1Password
Save to Pocket
Social Fixer
3rd Party Preference Panes: ℹ️
Dashboard KickStart [Support]
Diablotin [Support]
FinderPop [Support]
Flash Player [Support]
Flip4Mac WMV [Support]
GPGPreferences [Support]
Growl [Support]
MacFUSE [Support]
MagicPrefs [Support]
NuFile [Support]
Pastebot Sync [Support]
PathSnagger [Support]
Perian [Support]
SharePoints [Support]
TechTool Protection [Support]
TimeMachineScheduler [Support]
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: ON
Auto backup: NO - Auto backup turned off
Volumes being backed up:
SylerNet Adjunct: Disk size: 269.14 GB Disk used: 205.43 GB
Jane's Brain: Disk size: 627.01 GB Disk used: 538.19 GB
Destinations:
data [Network]
Total size: 2.00 TB
Total number of backups: 27
Oldest backup: 2014-11-28 08:04:00 +0000
Last backup: 2014-12-08 18:53:02 +0000
Size of backup disk: Too small
Backup size 2.00 TB < (Disk used 743.62 GB X 3)
Top Processes by CPU: ℹ️
      9% iTunes
      3% WindowServer
      1% coreaudiod
      1% Steam Helper
      0% Boom
Top Processes by Memory: ℹ️
129 MB com.apple.WebKit.WebContent
120 MB mds_stores
112 MB Finder
103 MB Folder Actions Dispatcher
77 MB Spotlight
Virtual Memory Information: ℹ️
72 MB Free RAM
1.02 GB Active RAM
942 MB Inactive RAM
648 MB Wired RAM
9.41 GB Page-ins
1.30 GB Page-outs
Diagnostics Information: ℹ️
Dec 10, 2014, 10:12:12 PM Self test - passed
Dec 10, 2014, 07:13:15 PM MacUpdate Desktop_2014-12-10-191315_Jane.crash
Dec 10, 2014, 06:31:37 PM Civilization IV Beyond the Sword_2014-12-10-183137_Jane.crash
Dec 9, 2014, 07:30:06 PM MacUpdate Desktop_2014-12-09-193006_Jane.cpu_resource.diag [Details]
Dec 9, 2014, 03:50:06 PM Finder_2014-12-09-155006_Jane.hang
Dec 9, 2014, 03:19:44 PM MacUpdate Desktop_2014-12-09-151944_Jane.cpu_resource.diag [Details]
Dec 9, 2014, 02:36:11 PM EvernoteHelper_2014-12-09-143611_Jane.crash
Dec 8, 2014, 02:11:35 PM SCNAlembic_2014-12-08-141135_Jane-2.crash
Dec 7, 2014, 11:21:52 PM Numbers_2014-12-07-232152_Jane.hang
Dec 8, 2014, 10:40:55 PM WindowServer_2014-12-08-224055_Jane-2.crash
Dec 10, 2014, 01:02:37 AM garcon_2014-12-10-010237_Jane.crash
Dec 10, 2014, 06:31:11 PM Civilization IV Beyond the Sword_2014-12-10-183111_Jane.crash
Dec 10, 2014, 01:26:58 AM Install Adobe Flash Player_2014-12-10-012658_Jane.crash
Dec 9, 2014, 07:31:50 PM garcon_2014-12-09-193150_Jane.crash

Error list (solman 4 loading)

Similar Messages

Maybe you are looking for