Error Loading data from SAP R/3 to BW
Dear sdn,
When I create a infopackage and load transaction or master data from R3. Sometimes the produre is correct but most of the time errors occurs.
<b>The monitor <i><u>detail</u></i> trip info:</b>
Extraction (messages): Missing messages
Missing message: Request received
Missing message: Number of sent records
Missing message: Selection completed
Transfer (IDocs and TRFC): Missing messages or warnings
Request IDoc : IDoc ready to be transferred to application
Processing (data packet): No data
<b>The monitor <i><u>status</u></i> trip info:</b>
Request still running
Diagnosis
No errors could be found. The current process has probably not finished yet.
System response
The ALE inbox of the SAP BW is identical to the ALE outbox of the source system
and/or
the maximum wait time for this request has not yet run out
and/or
the batch job in the source system has not yet ended.
Current status
No Idocs arrived from the source system.
<b>The monitor <u>status</u> trip info: (<u>step by step analysis</u>):</b>
green light Data request sent off ?
gray light RFC to source system successful ?
gray light Does selectable data exist in the source system?
red light Data selection successfully started ?
red light Data selection successfully finished ?
green light Processing error in source system reported?
gray light RFC to Warehouse successful ?
green light Processing error in Warehouse reported ?
gray light Processing successfully finished?
gray light All reported data packets received?
gray light All data packets complete ?
green light Have all Processing Steps been Carried out ?
green light All Data Packets Updated in all Targets?
green light Inadmissable Aggregation?
hi
i looks like Idoc not processed
-->go to BD87,and slect the WUPBON and click Process tab.
--> then the IDOCs will get process to
-->go to LBWQ to see the entries, once the IDOC process you should get the entries in the LBWQ.
-->now go to LBWE and got to job control of your data source.
-->click the Start date and say immidiate, then select the Print parameters and give the output device as Locl.
--> now hit shedule job, then job will release.
--> go to SM37 and see weather the job is finished.
now come to BW said
--> go to the pirticular process chain and run the process chain.
this should work. good luck
sampath..
Similar Messages
-
Erros while loading data from SAP R/3
Hi Friends.,
I'm going to load data from SAP R/3 all FI Modules to SAP BW in SAND BOX, before going to load master and tran data i would like to know, what are the errors might usualy be occurred while loading master & tran data using completly Business Content Objects?
Pls can anybody tell me ?
Regards.,
Balaji K. ReddyHi,
Some of the errors will be :
1. Missing master data while loading transaction data.
2. Invalid characters
3. RFC errors
4. Data format errors
5. IDoc errors
6. Locks
7. Table space errors
Also look at the thread below :
Troubleshoot Errors while Data Extraction...!!!
Cheers,
Kedar -
Loading data from SAP BW standard table to master data text
Hi,
Can anyone please tell me the steps to load data from SAP BW standard table to master data text?
How should the data source be created?
Thanks in advance.Hi aparajith,
Have you loaded the master data attr ?
ECC Steps
then load the attr text
create the ztable using standard table using generic data source using table function.
there you can select the which field you required
check the data in RSA3
BI STEPS: -
check the source system connection.
replicate the data source
create of find the master data object for text (including attr)
map the transformation
run the info package
create the DTP.
check the data in target object.
Thanks,
Phani. -
Loading data from SAP FI module to BW
Hi,
Can any one give some idea or documents which could be helpfull in loading data from SAP FI module to SAP BW.
Thanks
PrashantStandard Business Content for Financials:
http://help.sap.com/saphelp_bw30b/helpdata/en/65/7beb3cad744026e10000000a11405a/frameset.htm
Are you sure its Finance or CO-PA? CO-PA extraction is slightly different as you genrate a datasource based on the structure of your CO-PA module. -
Special character issue while loading data from SAP HR through VDS
Hello,
We have a special character issue, while loading data from SAP HR to IdM, using a VDS and following the standard documentation: http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e09fa547-f7c9-2b10-3d9e-da93fd15dca1?quicklink=index&overridelayout=true
French accent like (é,à,è,ù), are correctly loaded but Turkish special ones (like : Ş, İ, ł ) are transformed into u201C#u201D in Idm.
The question is : does someone know any special setting to do in the VDS or in IdM for special characters to solve this issue??
Our SAP HR version is ECC6.0 (ABA/BASIS7.0 SP21, SAP_HR6.0 SP54) and we are using a VDS 7.1 SP5 and SAP NW IdM 7.1 SP5 Patch1 on oracle 10.2.
ThanksWe are importing directly to the HR staging area, using the transactions/programs "HRLDAP_MAP", "LDAP" and "/RPLDAP_EXTRACT", then we have a job which extract data from the staging area to a CSV file.
So before the import, the character appears correctly in SAP HR, but by the time it comes through the VDS to the IDM's temporary table, it becomes "#".
Yes, our data is coming from a Unicode system.
So, could it be a java parameter to change / add in the VDS??
Regards. -
Loading data from SAP ECC to DS---Error
Hi all,
I am using Abap dataflow for loading data from a table in SAP Application to oracle database. I am getting an error during execution as follows.
I am using direct download method for transfer of data.need your valuable inputs.Hi phaneendranadh kandula,
Direct Download Method: It will directly transfer the data from SAP Application Server to Client Download Directory.
Note: It is not recommended because we cannot schedule job and not recommended for large amount of data.
Data Transfer Methods.
Data Services with SAP Direct Download Data Transfer Method
Not Recommended
We cannot Schedule
Not recommended for Large Amount of Data
Data Services with SAP Shared Directory Data Transfer Method
Recommended
Secure Method
Can Handel Large amount of data
can be executed in Background method
Data Services with SAP FTP Data Transfer Method
Recommended
Secure Method
Applicable in Multiple OS Environment
Data Services with SAP Custom Transfer Method
Recommended
Highly Secure -
Loading data from SAP Business One to BW
We need to load data from several SAP Business One databases to BW. I find some special objects for SAP Business One in the Business Content
And a short description in Help:
The source for the data upload is a file system. The relevant files can be generated using the views provided within the SAP Business One database.
May be someone has an experience in this area or could advise documentation about this
May be better to use DB-connect?
Thanks for your helpHello Elena,
I am just curious if you've found answer to your question how to extract data fron BusinessOne into SAP/BI? What can we use? Only flat files or there are some standard extractors exists? Or have you used DB Connect for that?
Thank you,
-Vitaliy -
Error Loading data from oracle to flat file in oracle data integrator
Hi All,
I m trying to load data from oracle database to flat file.But I am getting the error at step "Insert new row"(integration)
Error Message is:
7000 : null : com.sunopsis.jdbc.driver.file.b.i
com.sunopsis.jdbc.driver.file.b.i
at com.sunopsis.jdbc.driver.file.b.d.setDate(d.java)
at com.sunopsis.sql.SnpsQuery.updateExecStatement(SnpsQuery.java)
at com.sunopsis.sql.SnpsQuery.addBatch(SnpsQuery.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execCollOrders(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSqlI.treatTaskTrt(SnpSessTaskSqlI.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
at com.sunopsis.dwg.cmd.e.i(e.java)
at com.sunopsis.dwg.cmd.g.y(g.java)
at com.sunopsis.dwg.cmd.e.run(e.java)
at java.lang.Thread.run(Unknown Source)
I m nt able to find out the exact reason.Can anyone help me in that.yes...I got the mistake which i was doing.Actually the target file data type should be string and I was defined it diffrent for each column.
When I chnged the data type to string,data get loaded to target table.
Thanks for your reply. -
How to load data from SAP MDM to SAP BI/BW
Hi Guys,
I want to load master data from SAP MDM to SAP BI and would appreciate if some could provide me the step by step guide do the same. I found one of the document which talks about using generic DataSource "0MDM_Generic" but i dont find this datasource in BI content in my SAP BI 7.0 System.
Please let me know if some has already worked on this scenario and have any document.
Thanks,
AmitHi,
Pls chk this links;
MDM-BI Integration part 1 -
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b03b4c55-e63d-2b10-e2a2-f8310c8e795f
MDM-BI Integration part 2 -
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d0a6985b-fbbd-2b10-76a5-de0ed43f1a96
MDM-BI Integration part 3 -
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f08b9892-fbbd-2b10-4093-b2c21dfb90a7
Regards,
CSM Reddy -
LOADING DATA FROM SAP CO TRANSACTION DATA
Hello BW gurus,
Suppose if BW Implementation team has decided to use the 0CO_OM_CCA_1 standard Data Source and Info Source to extract CO transaction data from SAP R/3 system into BW system .
1)For the above scenario, How to create a Data Source for Transaction data in the source system ?
2) Apart from creating Data source , in how many ways can we extract the transaction data from 0CO_OM_CCA_1 data source? like transferring the data source in source system and activating the extract structure .
Points will be alloted ,
Thank you .Hi Sinha,
Check these links.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/fb07ab90-0201-0010-c489-d527d39cc0c6
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1910ab90-0201-0010-eea3-c4ac84080806
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/a7f2f294-0501-0010-11bb-80e0d67c3e4a
Regards,
Ram. -
Error loading data from BW to BPC with standard package
Hi experts,
A big part of our solution is pulling actuals from BW into BPC. To do so we use the standard SAP package "Load InfoProvider Selections" which calls the process chain /CPMB/LOAD_INFOPROV_UI.
We have migrated our environment to BPC 10 and tried to run this process and are now getting the following error:
“ Task name CONVERT:
No 1 Round:
An exception with the type CX_ST_MATCH_ELEMENT occurred, but
was neither handled locally, nor declared in a RAISING clause
System expected element 'Selections' ”
We have tested and this is happening with all data loading packages. It appears as though it is expecting a "selection" parameter, but selections have definitely been made. Has anyone encountered a similar issue or have any idea how to resolve it?
Best,
ChrisHi Vadim,
Yep, my script is:
(INFOPROVIDERSELECTION,%InforProvide%,"%SELECTION%",Please input the infoprovider and set selection,,)
(TRANSFORMATION,%TRANSFORMATION%,"Transformation file:",,,Import.xls)
(RADIOBUTTON,%CLEARDATA%,"Select the method for importing the data from the source file to the destination database",0,{"Merge data values (Imports all records, leaving all remaining records in the destination intact)","Replace && clear datavalues (Clears the data values for any existing records that mirror each entity/category/time combination defined in the source, then imports the source records)"},{"0","1"})
(RADIOBUTTON,%RUNLOGIC%,"Select whether to run default logic for stored values after importing",1,{"Yes","No"},{"1","0"})
(RADIOBUTTON,%CHECKLCK%,"Select whether to check work status settings when importing data.",1,{"Yes, check for work status settings before importing","No, do not check work status settings"},{"1","0"})
(%TEMPNO1%,%INCREASENO%)
(%ACTNO%,%INCREASENO%)
(/CPMB/INFOPROVIDER_CONVERT,OUTPUTNO,%TEMPNO1%)
(/CPMB/INFOPROVIDER_CONVERT,ACT_FILE_NO,%ACTNO%)
(/CPMB/INFOPROVIDER_CONVERT,TRANSFORMATIONFILEPATH,%TRANSFORMATION%)
(/CPMB/INFOPROVIDER_CONVERT,SUSER,%USER%)
(/CPMB/INFOPROVIDER_CONVERT,SAPPSET,%APPSET%)
(/CPMB/INFOPROVIDER_CONVERT,SAPP,%APP%)
(/CPMB/INFOPROVIDER_CONVERT,FILE,%InforProvide%)
(/CPMB/INFOPROVIDER_CONVERT,CLEARDATA,%CLEARDATA%)
(/CPMB/INFOPROVIDER_CONVERT,INFOPROV_SELECTION,%SELECTION%)
(/CPMB/CLEAR_DATA,INPUTNO,%TEMPNO1%)
(/CPMB/CLEAR_DATA,CHECKLCK,%CHECKLCK%)
(/CPMB/APPEND_LOAD,INPUTNO,%TEMPNO1%)
(/CPMB/APPEND_LOAD,ACT_FILE_NO,%ACTNO%)
(/CPMB/APPEND_LOAD,RUNLOGIC,%RUNLOGIC%)
(/CPMB/APPEND_LOAD,CHECKLCK,%CHECKLCK%)
(/CPMB/APPEND_LOAD,CLEARDATA,%CLEARDATA%)
Thanks,
Chris -
Error loading data from bw table into BW system
Dear all,
I have created and fill z tables in bw system, and try to load data into same bw system.
What i am facing is error message saying "Error in module RSQL of the database".
and when i check st22 for dump analysis, it says:
Runtime Errors DBIF_RSQL_INVALID_RSQL
Exception CX_SY_OPEN_SQL_DB
how come?
ThanksCan you try again by activating the generic datasource in RSO2. It should work.
And also make sure the tables are active.
Ravi -
Error loading data from an XML file using HTTPService
Hello All,
I have a runtime error that has got me beat at the moment I am building an App in Flash Builder 4 to run on AIR.
The error is as follows: TypeError: Error #1009: Cannot access a property or method of a null object reference.
What i'm Trying to Do:
I have 2 DropDownList controls, the first is populated with country names and the other with language options. All the 1st DropDownList control does
is set an image control to display the country flag and enable the 2nd DropDownList.
The 2nd DropDownList sets the langCode variable equal to the chosen language code. I then call the language function and pass it langCode. Using this variable, I build up the string
so that langFilePath will be equal to the XML file (which is "Lang_GBR.xml") location on my desktop and then call the HTTPService.
As soon as the language function is called, the runtime error occurs and highlights the line with btn_LS_mainMenu.label = loadLangService.lastResult.Lang.GlobalTags.btnMenu;
where I try to assign the button label with a new value from the XML file.
I suspect this may be a trivial error but I just can't see it at the moment.
Any help or guidance would be appreciated. Thanks
Code:
<fx:Script>
<![CDATA[
[Bindable]
public var langFilePath:String;
public var langDir:File = File.desktopDirectory;
public var langCode:String;
public function countrySelect_changeHandler(event:IndexChangeEvent):void
switch (countrySelect.selectedItem)
case ('United Kingdom'):
trace("Item Selected was: "+ countrySelect.selectedItem);
img_countryFlag.source = AngolaFlag;
break;
case ('France'):
trace("Item Selected was: "+ countrySelect.selectedItem);
img_countryFlag.source = AustraliaFlag;
break;
default:
break;
langSelect.enabled = true;
trace("1st dropdownbox");
public function langSelect_changeHandler(event:IndexChangeEvent):void
switch (langSelect.selectedItem)
case ('English'):
trace("Language Selected was: "+ langSelect.selectedItem);
langCode = "Lang_GBR";
break;
case ('French'):
trace("Language Selected was: "+ langSelect.selectedItem);
langCode = "Lang_FRA";
break;
language(langCode);
public function language(aParam:String):void
trace("Code Was: " + aParam);
trace("Lang dir: " + langDir.nativePath);
langFilePath = langDir.nativePath + "/" + aParam + ".xml";
trace("File to load: " + langFilePath);
trace("loadLangFile.url: " + loadLangService.url);
loadLangService.send();
btn_LS_mainMenu.label = loadLangService.lastResult.Lang.GlobalTags.btnMenu;
]]>
</fx:Script>
<fx:Declarations>
<s:HTTPService id="loadLangService" url="{langFilePath}"/>
</fx:Declarations>
<s:DropDownList x="10" y="201" id="countrySelect" prompt="Please Select Your Country" width="274" enabled="true" change="countrySelect_changeHandler(event)">
<s:DropDownList x="10" y="348" id="langSelect" prompt="Please Select Your Language" width="274" enabled="false" change="langSelect_changeHandler(event)">Don't sure about your XML structure, but for now i see the problem here between this 2 lines of code:
loadLangService.send();
btn_LS_mainMenu.label = loadLangService.lastResult.Lang.GlobalTags.btnMenu;
Think data that your httpService should receive just can't go so fast to populate the lastResult before you call it in the next line
Try adding a result listener to your service before you send it:
loadLangService.addEventListener(ResultEvent.RESULT, handler);
loadLangService.send();
function handler(event:ResultEvent):void {
btn_LS_mainMenu.label = loadLangService.lastResult.Lang.GlobalTags.btnMenu; -
Hi!
I have a table of SAP R\3, for example
A | B | C
10 | 5 | 2
A,B,C - name of columns
10,5,2 - value, may be amount
There is ODS with key figure and characteristic in BW.
I want to load A,B,C(name of columns) in value of characteristic,
10,5,2 in key figure.
How can I do it?
May be I have to write name of columns manually on transformation or use functional module.Hi,
Suppose the paramaters of source are as follows:
ODS - /bic/aods_100
Key field in ODS(primary keys) - /bic/prim_key1
Data fields in ODS - /bic/a, /bic/b, /bic/c
Suppose the paramaters of target are as follows(where the values A|B|C need to be populated):
ODS - /bic/aods_200
Key field in ODS(primary keys-which holds name of table) - /bic/prim_key1 (Char 30)
Key field in ODS(Primary Key-which holds position of fields) -/bic/field_num. (Numc 4)
Data fields in ODS (value which holds A | B | C) - /bic/data_field1 (char 1) (Char 30)
Key figures (value which hold 10 | 5 | 2) - KF_1. (Numc 6)
Assumptions: data_package does not contain the new table details.
Then the code in Start of the ods will be:
*Global Declarations
DATA: field_nam TYPE STANDARD TABLE OF dfies WITH HEADER LINE.
DATA: table_nam TYPE ddobjname VALUE '/bic/aods_100'.
*In Start routine
clear: field_nam[].
CALL FUNCTION 'DDIF_FIELDINFO_GET'
EXPORTING
tabname = table_nam
langu = sy-langu
all_types = 'X'
TABLES
dfies_tab = field_nam
EXCEPTIONS
not_found = 1
internal_error = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
loop at field_nam.
clear: data_package.
data_package-/bic/prim_key1 = field_nam-tabname.
data_package-/bic/field_num = field_nam-position.
data_package-/bic/data_field = field_nam-fieldname.
data_package-/bic/kf_1 = field_nam-leng.
append data_package.
endloop.
Cheers,
Rewards appriciated. -
Error
[Load data from excel file [1]] Error: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There
may be error message
I am using BIDS Microsoft Visual Studio 2008 and running the package to load the data from excel .
My machine has 32 bit excel hence have set property to RUN64BITRUNTIME AS FALSE.
But the error still occurs .
I checked on Google and many have used Delay validation property at Data flow task level to true but even using it at both excel connection manager and DFT level it doesnt work
MudassarThats my connection string
Provider=Microsoft.ACE.OLEDB.12.0;Data Source=E:\SrcData\Feeds\Utilization.xlsx;Extended Properties="Excel 12.0;HDR=NO";
Excel 2010 installed and its 32 bit edition
Are you referring to install this component -AccessDatabaseEngine_x64.exe?
http://www.microsoft.com/en-us/download/details.aspx?id=13255
Mudassar
You can try an OLEDB provider in that case
see
http://dataintegrity.wordpress.com/2009/10/16/xlsx/
you might need to download and install ms access redistributable
http://www.microsoft.com/en-in/download/details.aspx?id=13255
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs
Maybe you are looking for
-
I can't view my albums as slide shows. When I click on the slide show button nothing happens. I've never had this problem before. Why is this happening?
-
I have a Mac Mini 2009 that will not run Software update. I get a message that says Unexplained error. Everything seems to work fine except software update will not run. I have upgraded the Ram to 8 gig and the Hard Drive to a 500 GB Seagate Hybri
-
Multispeaker Surround with SB Live Plati
Hello, I have following configuration: SB Li've Platinum DTT3500 Digital Win XP Prof I have change the operating system from win 98 to win xp pro. After this I've install following driver: 5.2.2.252 date 24.07.2002. Now I can't choose the multispeake
-
Having problems connecting 4TH Gen Ipod to home wifi!, Help please.
Okay so basically my Ipod will connect to any wifi connection, except my home wifi. It use to connect just fine, but for some reason it won't connect anymore. When I go to select my wifi, it shows & I tap on it, then a check mark appears, then a coup
-
SMS encrypted vs data coding scheme
Hi all, I have a problem in hands i can't find a "good" solution. I want to send an SMS with encrypted content and i have to send it in 7bit format. If i send it in 7bit format the phone crashes and i think it is due to the fact that encryption uses