Error loading data into ODS object

Hi,
I am trying to load some data into an ODS object, which actually does not seem very difficult. I got the InfoObjects and structure of the ODS object all set up. Transfer rules are defined and I succeed in loading the data into PSA.
From there i trigger the forwarding into the ODS object. And this is what i get (I use the BI in German, so maybe the translations are not 100% correct):
message missing: tranfer rules finished.
seems like the system does not get a esponse as to whether the transfer rules are worked through yet. this results in a timeout because nothing happens.
i'm sorry i cant give any more detailed information. maybe someone can give me a direcion in which to search for mistakes. irebuilt the transfer rules and compared with others, and found nothing. still the same problem...
cheers,
stefan

Oh yeah, that error message i've been talking about was actually a note in the details of the monitor.
you can see it here:
http://www.fape.info/files/data_transfer_monitor_details.bmp
let me give you some translation.
- status: some error occured.
-- data request, ok
-- extraction, some error
-- transfer
****data packet 1: received in bw, data not processed yet
****data packet 2: ...
****data packet 3: ...
-- processing
--- data packet 1:
++++ transfer into PSA, no problem
transfer rules: error
******processing started
******missing response: transfer rules complete
i hope this gives an idea.
i couldn't come up with any solution so far. don't know why this response is missing after the processing of the data started.

Similar Messages

Error Loading data into ODS from ODS

I have a loading problem wen trying to load data fro an ODS to another which has a start routine in the Update rules.
the errors are as follows.
ERROE 7 when sending IDOC
&INCLUDE INCL_INSTALLATION ERROR
&INCLUDE INCL_INSTALLATION ERROR 7
&INCLUDE INCL_INSTALLATION ERROR 2
&INCLUDE INCL_INSTALLATION ERROR 5
Connection Closed (no data) 4
Connection Closed (no data)
Connection Closed (no data) 6
Error in Source System.
But there are lot of data in the loading ODS
Please help me

Hi,
Please check the following OSS notes.
Note 610938 - Error 7 during transfer of an IDoc into BW
Note 610246 - Error 7 when sending an IDoc
Regards.

Error Loading Data into a flat file

I am recieving the following error when loading data into a flat file from a flat file. SQL 2005 is my back end DB. If I cut the file iin half approx 500K rows my ODI interface works fine. Not sure what to look at.. I rebuit the interface which before was just dying giving no error and now I am getting this.
Thanks
java.lang.Exception
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
     at com.sunopsis.dwg.cmd.e.i(e.java)
     at com.sunopsis.dwg.cmd.g.y(g.java)
     at com.sunopsis.dwg.cmd.e.run(e.java)
     at java.lang.Thread.run(Unknown Source)

Figured it out, found similar post that stated changing the HEAP size
Increase the page size in odiparams.bat in the bin folder and restart Designer.
For eg:
set ODI_INIT_HEAP=128m
set ODI_MAX_HEAP=1024m

Error while loading data to ods object from flatfile

hello all
Iam loading data from flatfile to ods object and the processing type is PSA and then to data target(package by package),data arrived in PSA(its green) but in monitor the request is in red and in details tab of subsequent processing its showing as ODS activation?(change-log):not yet activated and overall the error is Missing Messages.
and its also saying like "Activation of data records from ODS object ODS_SALES terminated.
and in help node its saying like data arrived in BW and try to change the request from red to green?
can anyone tell me what will be the problem?
In settings of ODS object everthing is set to automatically.
many thanks
balaji

Hi praveen
problem is generic here.
In monitor tab the request and overall the statuts is "RED",but when I went into the mange tab of ODS object here the request is "GREEN",but the data is not available here.but data is still available in "New data",how come data is not yet activated.
bcoz in settings all are set to "automatically",so there is no question of manual activation?
One more question is in Settings Iam finding one column like "Unique Data Records",whats's this,if v check this what happens ifnot what happens?
regrads
balaji

Short dump error in Loading data into ODS

Hi All,
I am facing problem in loading data from R/3 to BW into an ODS. The system is going into short dump.The error message occuring in BW side is
Trigger Location of Runtime Error
    Program                               SAPLRSS1
    Include                                 LRSS1F11
    Row                                     1.358
    Module type                         (FORM)
Module_Name :RSM1_CHECK_FOR_DELTAUPD
So can any body help me regarding this.
Thanks in advance
Anurag

Hi Anurag,
please check out this link: https://websmp107.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=405943&_NLANG=EN
regards
Siggi

Error while loading data into ODS

Hi we have BI for NW04S and CRM4.0. While loading data for a CRM ODS , I have received a error message which I never seen before. Yesterdaya data load was smooth and I only see issue while loading data today
The error message in the monitor is as follows
"Port 'A000000003' does not exists in the table of Port Description' ( message ID E0, NO 31 ).
have anybody encountered this.
Thanks
Arun

Thanks Marc,
we found the table EDIPOA and found that the port that is missing. It seems that the enytry( row) for our CRM system is missing which has this port as a field in this table.
Not sure whether to manually populate it or it's part of the source system repair etc.
please let me know
Thanks
Arunava

Error loading data into Essbase from the SQL Server

Hello experts!
I've got another urgent and confusing issue. I am loading data from an SQL Server view into Essbase (which is reversed with multiple data columns) using ODI 11.1.1.5 and I get the following error at +"3-Loading -SrcSet0-Load Data"+ step:
ODI-1227: Task SrcSet0 (Loading) fails on the source MICROSOFT_SQL_SERVER connection.
+Caused By: java.sql.SQLException: [FMWGEN][SQLServer JDBC Driver][SQLServer]Incorrect syntax near the keyword 'View'+
where "View" is the name of the dimension (non-data) column in the SQL view.
Please help me with any hints! Thank you so much!

John, thank you so much!
Your answer is exactly correct!
"View" is an object name in SQL Server so this word cannot be used as a column name in SQL Server tables. Once the name of the colunm changed from "View" to another, the interface runs without errors!

Error loading data into PSA (Exception in SM58)

Hello,
I have a problem to load data from a SAP ERP 6.0 into a (new) SAP BI 7.3 System. I created a DataSource in the ERP system and try to load the data into a PSA. Now, when I start the data load of my InfoPackage, I get following result:
After that nothing further happens. Then I checked SM58:
Does this error look familiar to anybody? I'm wondering why the "Target System" column is empty. Maybe there are some basic settings missing?
Thanks in advance!
Regards
Václav

Hi Raman,
The requests are marked as successful in SM37.
RequestId from InfoPackage Monitor:
And the corresponding job in SM37 (ECC system):
So this part seems to be fine. What else can I check?
Thanks & regards
Václav

How to filter the records in the process of loading data into ODS

Hi All,
I am doing some data extraction from R/3 system. But I need to ignore(don't need to load) the records with a date field (Purchase Order date) that is blank.
So how can I filter out the records with the blank date field?
Some one suggested me to write some select statement (looping the data packages) in the start routine but I am not that experianced with the ABAP routines. So can anyone provide some sample format of the routine or can you suggest me some other way to filter out this data.

Ram Kumar,
I used this in the start routine but it gives me an error saying ...
No component exists with the name "TRAN_STRUCTURE-BEDAT"
delete datapak where TRAN_STRUCTURE-BEDAT = '' OR
 TRAN_STRUCTURE-BADAT = '' OR
 TRAN_STRUCTURE-ERDAT = '' OR
 TRAN_STRUCTURE-FRGDT = '' OR
 TRAN_STRUCTURE-UDATE = ''.
I have taken out the TRAN_STRUCTURE part and just typed
delete datapak where BEDAT = '' OR
 BADAT = '' OR
 ERDAT = '' OR
 FRGDT = '' OR
 UDATE = ''.
This above statement has no syntax errors. but this statement doesn't filter out the records with a the date fields that are blank.
Please help me out here.
This is kind of urgent.
Thanks,

"Error While loading data from ODS to Target "

Hi All,
I am loading masterdata from ODS to infoobject as data target, I am getting an error message as
Error message from the source system
Diagnosis
An error occurred in the source system.
System response
Caller 09 contains an error message.
Further analysis:
The error occurred in Service API .
Refer to the error message.
DataSource 80BP_ID does not have the same status as the source system in the Business Information Warehouse.
The time stamp in the source system is 09.08.2006 10:17:24.
The time stamp in the BW system is 15.03.2006 16:44:34.
But we are getting Data till ODS, when we manually load from ODS to infoobject this error is coming up.
Please help in resolving this,
Thanks,
Sairam.

You are welcome Sairam
The generated objects are export datasources based on the ODS objects. These are automatically generated because ODS objects are a key component to a data model or datawarehouse strategy where their role is to stage the data for consolidation or harmonization purposes. The generated datasource helps you to load data into further data targets. The use of a cube as an export datasource is not as common, and so the datasource is not automatically generated for them.
Hope this helps...

Errors when loading data to ODS

Hi,
I am getting the following dump when loading data to ODS
whta might be the problem
Runtime Error MESSAGE_TYPE_X
Date and Time 29.09.2006 14:26:52
ShrtText
The current application triggered a termination with a short dump.
What happened?
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
is especially useful if you want to keep a particular message.
Error analysis
Short text of error message:
Test message: SDOK_GET_PHIO_ACCESS 001
Technical information about the message:
Message classe...... "1R"
Number.............. 000
Variable 1.......... "SDOK_GET_PHIO_ACCESS"
Variable 2.......... 001
Variable 3.......... " "
Variable 4.......... " "
Variable 3.......... " "
Variable 4.......... " "
How to correct the error
Probably the only way to eliminate the error is to correct the program.
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"MESSAGE_TYPE_X" C
"SAPLSDCL" or "LSDCLF00"
"INTERNAL_ERROR"
If you cannot solve the problem yourself and you wish to send
an error message to SAP, include the following documents:
1. A printout of the problem description (short dump)
To obtain this, select in the current display "System->List->
Save->Local File (unconverted)".
2. A suitable printout of the system log
To obtain this, call the system log through transaction SM21.
Limit the time interval to 10 minutes before and 5 minutes
after the short dump. In the display, then select the function
"System->List->Save->Local File (unconverted)".
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, select the Editor function "Further Utilities->
Upload/Download->Download".
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
System environment
SAP Release.............. "640"
Application server....... "bomw093a"
Network address.......... "132.186.125.66"
Operating system......... "Windows NT"
Release.................. "5.2"
Hardware type............ "4x Intel 801586"
Character length......... 8 Bits
Pointer length........... 32 Bits
Work process number...... 16
Short dump setting....... "full"
Database server.......... "BOMW093A"
Database type............ "ORACLE"
Database name............ "BIW"
Database owner........... "SAPDAT"
Character set............ "English_United State"
SAP kernel............... "640"
Created on............... "Nov 4 2004 23:26:03"
Created in............... "NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10"
Database version......... "OCI_920_SHARE "
Patch level.............. "43"
Patch text............... " "
Supported environment....
Database................. "ORACLE 8.1.7.., ORACLE 9.2.0.."
SAP database version..... "640"
Operating system......... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2"
Memory usage.............
Roll..................... 8112
EM....................... 6271776
Heap..................... 0
Page..................... 24576
MM Used.................. 3921120
MM Free.................. 258392
SAP Release.............. "640"
User and Transaction
Client.............. 800
User................ "IC881147"
Language key........ "E"
Transaction......... " "
Program............. "SAPLSDCL"
Screen.............. "SAPMSSY0 1000"
Screen line......... 6
Information on where terminated
The termination occurred in the ABAP program "SAPLSDCL" in "INTERNAL_ERROR".
The main program was "RSRD_BROADCAST_PROCESSOR ".
The termination occurred in line 25 of the source code of the (Include)
program "LSDCLF00"
of the source code of program "LSDCLF00" (when calling the editor 250).
The program "SAPLSDCL" was started as a background job.
Job name........ "SECOQUERY"
Job initiator... "IC881147"
Job number...... 14265102
Source Code Extract
Line
SourceCde
1
2
INCLUDE LSDCLF00 *
3
4
5
6
 FORM INTERNAL_ERROR *
7
8
 Handles unexpected error conditions (internal errors)
9
10
--> VALUE(U_ROUTINE) Routine/function module where error occured
11
--> VALUE(U_ERROR_CODE) Identifier in routine (e.g. number)
12
--> VALUE(U_VAR1) Variable containing further information
13
--> VALUE(U_VAR2) Variable containing further information
14
--> VALUE(U_VAR3) Variable containing further information
15
--> VALUE(U_VAR4) Variable containing further information
16
17
form internal_error
18
using value(u_routine)
19
value(u_error_code)
20
value(u_var1)
21
value(u_var2)
22
value(u_var3)
23
value(u_var4).
24
>>>>>
message x000 with u_routine u_error_code u_var1 u_var2.
26
27
endform.
28
29
30
*& Form BAD_OBJECT_TO_SYMSG
31
32
 maps error information in u_bad_object into system message
33
 variables
34
35
--> VALUE(U_BAD_OBJECT) structure containing error information
36
37
form bad_object_to_symsg
38
using value(u_bad_object) type sdokerrmsg.
39
40
sy-msgid = u_bad_object-id.
41
sy-msgty = u_bad_object-type.
42
sy-msgno = u_bad_object-no.
43
sy-msgv1 = u_bad_object-v1.
44
sy-msgv2 = u_bad_object-v2.
Contents of system fields
Name
Val.
SY-SUBRC
0
SY-INDEX
0
SY-TABIX
1
SY-DBCNT
4
SY-FDPOS
0
SY-LSIND
0
SY-PAGNO
0
SY-LINNO
1
SY-COLNO
1
SY-PFKEY
SY-UCOMM
SY-TITLE
Report Dissemaintion Framework: Executing the Transferred Settings
SY-MSGTY
X
SY-MSGID
1R
SY-MSGNO
000
SY-MSGV1
SDOK_GET_PHIO_ACCESS
SY-MSGV2
001
SY-MSGV3
SY-MSGV4
Active Calls/Events
No. Ty. Program Include Line
Name
15 FORM SAPLSDCL LSDCLF00 25
INTERNAL_ERROR
14 FORM SAPLSDCI LSDCIU13 303
PHIO_GET_CONTENT_ACCESS
13 FUNCTION SAPLSDCI LSDCIU13 113
SDOK_PHIO_GET_CONTENT_ACCESS
12 FUNCTION SAPLSKWF_CONTENT LSKWF_CONTENTU02 63
SKWF_PHIO_CONTENT_ACCESS_GET
11 METHOD CL_RSRA_KWF_UTILITIES=========CP CL_RSRA_KWF_UTILITIES=========CM00B 50
CL_RSRA_KWF_UTILITIES=>COPY_MIME_TO_FOLDER
10 METHOD CL_RSRA_KWF_TMPL==============CP CL_RSRA_KWF_TMPL==============CM002 28
CL_RSRA_KWF_TMPL=>GET_STYLESHEET
9 METHOD CL_RSRA_KWF_TMPL==============CP CL_RSRA_KWF_TMPL==============CM001 227
CL_RSRA_KWF_TMPL=>CONSTRUCTOR
8 METHOD CL_RSRA_ENGINE_BC=============CP CL_RSRA_ENGINE_BC=============CM010 9
CL_RSRA_ENGINE_BC=>SET_TEMPLATE_FOLDER
7 METHOD CL_RSRA_ENGINE_BC=============CP CL_RSRA_ENGINE_BC=============CM001 75
CL_RSRA_ENGINE_BC=>CONSTRUCTOR
6 METHOD CL_RSRA_JOB===================CP CL_RSRA_JOB===================CM003 47
CL_RSRA_JOB=>EXECUTE_SINGLE
5 METHOD CL_RSRA_JOB===================CP CL_RSRA_JOB===================CM00E 14
CL_RSRA_JOB=>EXECUTE_SINGLE_RC
4 METHOD CL_RSRD_PRODUCER_RA===========CP CL_RSRD_PRODUCER_RA===========CM001 147
CL_RSRD_PRODUCER_RA=>IF_RSRD_F_PRODUCER_RT~PRODUCE
3 METHOD CL_RSRD_SETTING===============CP CL_RSRD_SETTING===============CM005 28
CL_RSRD_SETTING=>EXECUTE_NODES
2 METHOD CL_RSRD_SETTING===============CP CL_RSRD_SETTING===============CM002 73
CL_RSRD_SETTING=>EXECUTE
1 EVENT RSRD_BROADCAST_PROCESSOR RSRD_BROADCAST_PROCESSOR 197
START-OF-SELECTION
Chosen variables
Name
Val.
No. 15 Ty. FORM
Name INTERNAL_ERROR
U_ROUTINE
SDOK_GET_PHIO_ACCESS
54445445554445444455
34FBF754F089FF133533
SY-MSGV1
SDOK_GET_PHIO_ACCESS
54445445554445444455222222222222222222222222222222
34FBF754F089FF133533000000000000000000000000000000
U_ERROR_CODE
001
333
001
SY-MSGV2
001
33322222222222222222222222222222222222222222222222
00100000000000000000000000000000000000000000000000
U_VAR1
2
0
SY-MSGV3
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
SDOKI_MODE_DELETE
5
0000
5000
U_VAR2
2
0
SY-MSGV4
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
No. 14 Ty. FORM
Name PHIO_GET_CONTENT_ACCESS
SYST
####################################################A#######P###############è#################
0000000000000000000000000000000000000000000000000000400000005000000000000000E00000000000000000
0000000010002000000000000000000000000000400000001000100010000000000000000000840000000000000000
PHIO_OBJECT_ID-CLASS
2222222222
0000000000
DUMMY_VERSTYPE
0
3
0
DUMMY_FCT_EXPORT
222222222222222222222222222222
000000000000000000000000000000
DUMMY_FCT_IMPORT
222222222222222222222222222222
000000000000000000000000000000
DUMMY_FCT_DELETE
222222222222222222222222222222
000000000000000000000000000000
FCT_VIEW
222222222222222222222222222222
000000000000000000000000000000
BUFF_XPIRE
000000000000
333333333333
000000000000
NO_BUFFER
2
0
SUBRC_AUX
3
0000
3000
SDOKA_EVENT_PH_FROM_REL_PRE
0022
3333
0022
SCREEN
%_17SNS0001592815_%_%_%_%_%_%_
2533545333333333352525252525252222222222222222222222222222222222222222222222222222222222222222
5F173E30001592815F5F5F5F5F5F5F0000000000000000000000000000000000000000000000000000000000000000
<%_TABLE_SDOKSTRE>
SY-XFORM
CONVERSION_EXIT
444545544454545222222222222222
3FE65239FEF5894000000000000000
CONTEXT[]
Table IT_5544[0x89]
FUNCTION=SKWF_PHIO_CONTENT_ACCESS_GETDATA=CONTEXT[]
Table reference: 324
TABH+ 0(20) = 00000000801CE03C0000000044010000A8150000
TABH+ 20(20) = 0000000059000000FFFFFFFF047B0200D00E0000
TABH+ 40( 8) = 10000000C1248000
store = 0x00000000
ext1 = 0x801CE03C
shmId = 0 (0x00000000)
id = 324 (0x44010000)
label = 5544 (0xA8150000)
fill = 0 (0x00000000)
leng = 89 (0x59000000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000058
occu = 16 (0x10000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = Not allocated
pghook = Not allocated
idxPtr = Not allocated
refCount = Not allocated
tstRefCount = Not allocated
lineAdmin = Not allocated
lineAlloc = Not allocated
store_id = Not allocated
shmIsReadOnly = Not allocated
>>>>> 1st level extension part <<<<<
regHook = 0x00000000
hsdir = 0x00000000
ext2 = 0x381CE03C
>>>>> 2nd level extension part <<<<<
tabhBack = 0x98DC033D
delta_head = 000000000000000000000000000000000000000000000000000000000000000000000000
pb_func = 0x00000000
pb_handle = 0x00000000
CONTEXT
22222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
PROPERTIES[]
Table[initial]
PROPERTIES
22222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
No. 13 Ty. FUNCTION
Name SDOK_PHIO_GET_CONTENT_ACCESS
ALLOW_MODEL
2
0
CACHE_SERVER
0000000000
2222222222222222222222222222222222222222222222222222222222222222333333333322222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
CLIENT
800
333
800
CONTENT_ONLY
X
5
8
CONTENT_OR_URL_ONLY
2
0
OBJECT_ID
222222222222222222222222222222222222222222
000000000000000000000000000000000000000000
RAW_MODE
2
0
TEXT_AS_STREAM
X
5
8
USE_URL_AT
2
0
ACCESS_MODE
00
33
00
DOCUMENT_HTTPS_URL
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
DOCUMENT_URL
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
MODEL_RETURNED
2
0
COMPONENTS[]
Table[initial]
COMPONENT_ACCESS[]
Table IT_5533[0x8616]
CLASS=CL_RSRA_KWF_UTILITIESMETHOD=COPY_MIME_TO_FOLDERDATA=L_T_COMPONENT_ACCESS
Table reference: 337
TABH+ 0(20) = 00000000481BE03C00000000510100009D150000
TABH+ 20(20) = 00000000A8210000FFFFFFFF04C5010088190000
TABH+ 40( 8) = 01000000C1248000
store = 0x00000000
ext1 = 0x481BE03C
shmId = 0 (0x00000000)
id = 337 (0x51010000)
label = 5533 (0x9D150000)
fill = 0 (0x00000000)
leng = 8616 (0xA8210000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000107
occu = 1 (0x01000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = Not allocated
pghook = Not allocated
idxPtr = Not allocated
refCount = Not allocated
tstRefCount = Not allocated
lineAdmin = Not allocated
lineAlloc = Not allocated
store_id = Not allocated
shmIsReadOnly = Not allocated
>>>>> 1st level extension part <<<<<
regHook = 0x00000000
hsdir = 0x00000000
ext2 = 0x001BE03C
>>>>> 2nd level extension part <<<<<
tabhBack = 0x985D043D
delta_head = 000000000000000000000000000000000000000000000000000000000000000000000000
pb_func = 0x00000000
pb_handle = 0x00000000
CONTEXT[]
Table IT_5544[0x89]
FILE_CONTENT_ASCII[]
Table IT_5534[0x1022]
CLASS=CL_RSRA_KWF_UTILITIESMETHOD=COPY_MIME_TO_FOLDERDATA=L_T_FILE_CONTENT_ASCII
Table reference: 312
TABH+ 0(20) = 00000000B01BE03C00000000380100009E150000
TABH+ 20(20) = 00000000FE030000FFFFFFFF04C50100D81A0000
TABH+ 40( 8) = 10000000C1248000
store = 0x00000000
ext1 = 0xB01BE03C
shmId = 0 (0x00000000)
id = 312 (0x38010000)
label = 5534 (0x9E150000)
fill = 0 (0x00000000)
leng = 1022 (0xFE030000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000113
occu = 16 (0x10000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = Not allocated
pghook = Not allocated
idxPtr = Not allocated
refCount = Not allocated
tstRefCount = Not allocated
lineAdmin = Not allocated
lineAlloc = Not allocated
store_id = Not allocated
shmIsReadOnly = Not allocated
>>>>> 1st level extension part <<<<<
regHook = 0x00000000
hsdir = 0x00000000
ext2 = 0x681BE03C
>>>>> 2nd level extension part <<<<<
tabhBack = 0xB813043D
delta_head = 000000000000000000000000000000000000000000000000000000000000000000000000
pb_func = 0x00000000
pb_handle = 0x00000000
FILE_CONTENT_BINARY[]
Table IT_5535[0x1022]
CLASS=CL_RSRA_KWF_UTILITIESMETHOD=COPY_MIME_TO_FOLDERDATA=L_T_FILE_CONTENT_BINARY
Table reference: 325
TABH+ 0(20) = 00000000181CE03C00000000450100009F150000
TABH+ 20(20) = 00000000FE030000FFFFFFFF04C50100101B0000
TABH+ 40( 8) = 10000000C1248000
store = 0x00000000
ext1 = 0x181CE03C
shmId = 0 (0x00000000)
id = 325 (0x45010000)
label = 5535 (0x9F150000)
fill = 0 (0x00000000)
leng = 1022 (0xFE030000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000114
occu = 16 (0x10000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = Not allocated
pghook = Not allocated
idxPtr = Not allocated
refCount = Not allocated
tstRefCount = Not allocated
lineAdmin = Not allocated
lineAlloc = Not allocated
store_id = Not allocated
shmIsReadOnly = Not allocated
>>>>> 1st level extension part <<<<<
regHook = 0x00000000
hsdir = 0x00000000
ext2 = 0xD01BE03C
>>>>> 2nd level extension part <<<<<
tabhBack = 0xC08FD33C
delta_head = 000000000000000000000000000000000000000000000000000000000000000000000000
pb_func = 0x00000000
pb_handle = 0x00000000
PROPERTIES[]
Table[initial]
COMPONENT_ACCESS
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
FILE_CONTENT_ASCII
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
FILE_CONTENT_BINARY
0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.1.
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
OBJECT_ID_AUX
222222222222222222222222222222222222222222
000000000000000000000000000000000000000000
X_DOCUMENT_URL
X
5
8
X_DOCUMENT_HTTPS_URL
X
5
8
X_COMPONENT_ACCESS
X
5
8
SUBRC_AUX
0
0000
0000
%_DUMMY$$
2222
0000
%_SPACE
2
0
SY-REPID
SAPLSDCI
5454544422222222222222222222222222222222
310C343900000000000000000000000000000000
No. 12 Ty. FUNCTION
Name SKWF_PHIO_CONTENT_ACCESS_GET
CACHE_SERVER
0000000000
2222222222222222222222222222222222222222222222222222222222222222333333333322222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
PHIO
2222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000
USE_URL_AT
2
0
X_ALLOW_MODEL
2
0
X_CONTENT_ONLY
X
5
8
X_CONTENT_OR_URL_ONLY
2
0
X_RAW_MODE
2
0
X_TEXT_AS_STREAM
X
5
8
ACCESS_MODE
00
33
00
DOCUMENT_HTTPS_URL
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
DOCUMENT_URL
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
ERROR
000
2222222222222222222223332222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
X_MODEL_RETURNED
2
0
COMPONENT_ACCESS[]
Table IT_5533[0x8616]
CONTEXT[]
Table IT_5544[0x89]
FILE_CONTENT_ASCII[]
Table IT_5534[0x1022]
FILE_CONTENT_BINARY[]
Table IT_5535[0x1022]
PROPERTIES[]
Table[initial]
SKWFA_C_ACT_READ
03
33
03
SYST-REPID
SAPLSKWF_CONTENT
5454545454445445222222222222222222222222
310C3B76F3FE45E4000000000000000000000000
%_ARCHIVE
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
PHIO+1(42)
222222222222222222222222222222222222222222
000000000000000000000000000000000000000000
CL_ABAP_TABLEDESCR=>TABLEKIND_STD
S
5
3
SKWFC_YES
X
5
8
No. 11 Ty. METHOD
Name CL_RSRA_KWF_UTILITIES=>COPY_MIME_TO_FOLDER
I_S_MIME_IO
FM_FOLDER 3AA00E1E0D0E3DCBE10000000A1144B5
4454444452234433434343434444333333334333343
6DF6FC4520031100515040534325100000001114425
I_S_FOLDER_IO
FBW_FLD 08BSWBLVV6N1IJCIG3VHEX2H8
4455444222233455445534344444354453432222222
627F6C40000082372C666E19A397368582880000000
L_T_PROPERTY_REQUEST
Table IT_5512[1x25]
CLASS=CL_RSRA_KWF_UTILITIESMETHOD=COPY_MIME_TO_FOLDERDATA=L_T_PROPERTY_REQUEST
Table reference: 316
TABH+ 0(20) = 28D5D23C68D5D23C000000003C01000088150000
TABH+ 20(20) = 0100000019000000FFFFFFFF04C5010038110000
TABH+ 40( 8) = 10000000C1248400
store = 0x28D5D23C
ext1 = 0x68D5D23C
shmId = 0 (0x00000000)
id = 316 (0x3C010000)
label = 5512 (0x88150000)
fill = 1 (0x01000000)
leng = 25 (0x19000000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000069
occu = 16 (0x10000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 1
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0xC00BE03C
pghook = 0x00000000
idxPtr = 0x00000000
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 16 (0x10000000)
lineAlloc = 16 (0x10000000)
store_id = 3644 (0x3C0E0000)
shmIsReadOnly = 0 (0x00000000)
>>>>> 1st level extension part <<<<<
regHook = 0x00000000
hsdir = 0x00000000
ext2 = 0x600DE03C
>>>>> 2nd level extension part <<<<<
tabhBack = 0x98D5033D
delta_head = 000000000000000000000000000000000000000000000000000000000000000000000000
pb_func = 0x00000000
pb_handle = 0x00000000
L_S_PROPERTY_REQUEST
KW_RELATIVE_URL
4555444545455542222222222
B7F25C14965F52C0000000000
L_T_PHIO
Table IT_5494[1x43]
CLASS=CL_RSRA_KWF_UTILITIESMETHOD=COPY_MIME_TO_FOLDERDATA=L_T_PHIO
Table reference: 309
TABH+ 0(20) = E8D4D23CE0D3D23C000000003501000076150000
TABH+ 20(20) = 010000002B000000FFFFFFFF04C5010018120000
TABH+ 40( 8) = 10000000C1248000
store = 0xE8D4D23C
ext1 = 0xE0D3D23C
shmId = 0 (0x00000000)
id = 309 (0x35010000)
label = 5494 (0x76150000)
fill = 1 (0x01000000)
leng = 43 (0x2B000000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000073
occu = 16 (0x10000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x2010E03C
pghook = 0x00000000
idxPtr = 0x00000000
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 16 (0x10000000)
lineAlloc = 16 (0x10000000)
store_id = 3643 (0x3B0E0000)
shmIsReadOnly = 0 (0x00000000)

Hi priya,
Not sure: check syntax in your Update Roules, also at level of start routine.
Ciao.
Riccardo.

Error in loading data into essbase while using Rule file through ODI

Hi Experts,
Refering my previous post Error while using Rule file in loading data into Essbase through ODI
I am facing problem while loading data into Essbase. I am able to load data into Essbase successfully. But when i used Rule file to add values to existing values I am getting error.
test is my Rule file.
com.hyperion.odi.essbase.ODIEssbaseException: com.hyperion.odi.essbase.ODIEssbaseException: Cannot put olap file object. Essbase Error(1053025): Object [test] already exists and is not locked by user [admin@Native Directory]
at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.execInBSFEngine(SnpScriptingInterpretor.java:346)
at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.exec(SnpScriptingInterpretor.java:170)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java:2458)
at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:48)
at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:1)
at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2906)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2609)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:540)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:453)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1740)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:338)
at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:214)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:272)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:263)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:822)
at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:123)
at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:83)
at java.lang.Thread.run(Thread.java:662)
from com.hyperion.odi.common import ODIConstants
from com.hyperion.odi.connection import HypAppConnectionFactory
from java.lang import Class
from java.lang import Boolean
from java.sql import *
from java.util import HashMap
# Get the select statement on the staging area:
sql= """select C1_HSP_RATES "HSP_Rates",C2_ACCOUNT "Account",C3_PERIOD "Period",C4_YEAR "Year",C5_SCENARIO "Scenario",C6_VERSION "Version",C7_CURRENCY "Currency",C8_ENTITY "Entity",C9_VERTICAL "Vertical",C10_HORIZONTAL "Horizontal",C11_SALES_HIERARICHY "Sales Hierarchy",C12_DATA "Data" from PLANAPP."C$_0HexaApp_PLData" where (1=1) """
srcCx = odiRef.getJDBCConnection("SRC")
stmt = srcCx.createStatement()
srcFetchSize=30
#stmt.setFetchSize(srcFetchSize)
stmt.setFetchSize(1)
print "executing query"
rs = stmt.executeQuery(sql)
print "done executing query"
#load the data
print "loading data"
stats = pWriter.loadData(rs)
print "done loading data"
#close the database result set, connection
rs.close()
stmt.close()
Please help me on this...
Thanks & Regards,
Chinnu

Hi Priya,
Thanks for giving reply. I already checked that no lock are available for rule file. I don't know what's the problem. It is working fine without the Rule file, but throwing error only when using rule file.
Please help on this.
Thanks,
Chinnu

Error while using Rule file in loading data into Essbase through ODI

Hi Experts,
I am facing problem while loading data into Essbase. I am able to load data into Essbase successfully. But when i used Rule fule to add values to existing values am getting error.
test is my Rule file.
com.hyperion.odi.essbase.ODIEssbaseException: com.hyperion.odi.essbase.ODIEssbaseException: Cannot put olap file object. Essbase Error(1053025): Object [test] already exists and is not locked by user [admin@Native Directory]
     at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
     at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.execInBSFEngine(SnpScriptingInterpretor.java:346)
     at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.exec(SnpScriptingInterpretor.java:170)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java:2458)
     at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:48)
     at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:1)
     at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2906)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2609)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:540)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:453)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1740)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:338)
     at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:214)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:272)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:263)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:822)
     at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:123)
     at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:83)
     at java.lang.Thread.run(Thread.java:662)
from com.hyperion.odi.common import ODIConstants
from com.hyperion.odi.connection import HypAppConnectionFactory
from java.lang import Class
from java.lang import Boolean
from java.sql import *
from java.util import HashMap
# Get the select statement on the staging area:
sql= """select C1_HSP_RATES "HSP_Rates",C2_ACCOUNT "Account",C3_PERIOD "Period",C4_YEAR "Year",C5_SCENARIO "Scenario",C6_VERSION "Version",C7_CURRENCY "Currency",C8_ENTITY "Entity",C9_VERTICAL "Vertical",C10_HORIZONTAL "Horizontal",C11_SALES_HIERARICHY "Sales Hierarchy",C12_DATA "Data" from PLANAPP."C$_0HexaApp_PLData" where      (1=1) """
srcCx = odiRef.getJDBCConnection("SRC")
stmt = srcCx.createStatement()
srcFetchSize=30
#stmt.setFetchSize(srcFetchSize)
stmt.setFetchSize(1)
print "executing query"
rs = stmt.executeQuery(sql)
print "done executing query"
#load the data
print "loading data"
stats = pWriter.loadData(rs)
print "done loading data"
#close the database result set, connection
rs.close()
stmt.close()
Please help me on this...
Thanks & Regards,
Chinnu

Hi Priya,
Thanks for giving reply. I already checked that no lock are available for rule file. I don't know what's the problem. It is working fine without the Rule file, but throwing error only when using rule file.
Please help on this.
Thanks,
Chinnu

Error While Loading data from ODS to Infocube

I am trying to load data from ODS to Infocube thru Update ODS data into data target. My requirement was to take a small subset of fields from ODS and design IC and load the data.
My load fails at Extraction process as I get 0 records from total number of records sent in each package. Please let me know if you need more information.
Please advise.
Thanks,
RR

In Details tab of monitor, in extraction step,
Extraction(messages): Errors occured
Green Light for Data Request Received
Green Light for Data Selection Scheduled
Yellow for 25000 Records sent(0 records received)
Yellow for 25000 Records sent(0 records received)
Yellow for 15000 Records sent(0 records received)
Green Light for Data Selection Ended
Please let me know, If you need more information.
Thanks,
R R

Error while loading data from ODS to IC.

Hi Experts,
             I am trying to load data from ODS to IC using Initial load. I failed first time. Then when I am trying to schedule it again I am getting a error message. I deleted the intial request. Even after that, I am getting the following message. Am I missing something?
Delete init. request
REQU_BQQCBQV5ZK9YEBB416C8QXXLC before running
init. again with same selection
Also can any one provide me a document that contians the lenght of all teh technames? I know I can find it out by looking into each one of the Tech Names. But I would be nice if anyone of you can provide me a document.
Can anyone of you please help me.
Thanks,
Nandini.

Hi,
By reading the error:
No transfer structure for InfoSource 8ZYNA_ODS and source system B3TCLNT800
I think the problem is actually with a Datamart. You can try to regenerate the export datasource and activate it.
Also, you can try to activate only the transfer structure again using the report "RS_TRANSTRU_ACTIVATE_ALL".
I hope this helps!
Pietro

Error loading data into ODS object

Similar Messages

Maybe you are looking for