Error loading init with data request in BW for 0mat_plnt

Hi experts,
I had a failed init request for 0mat_plant , I have deleted and run an inti request with a certain plant 0000-0001,
the Init requests is showing me a warning "Was not able to determine company code or cost center for plant 0001".
I have marked the request red and ran an init without data transfer (completed successfully ) , subsequently ran a full repiar request (is showing the same issue).
I have checked in rsa3 (R/3) The datasource is picking up the correct data , and the transfer structure doesnt have the filed Company code , neither the Cost center.
Please post you comments , that would be helpful.

yes the update tab is flaged as " always update data, even if not master data exist for the data.
I have not been able to resolve the issue yet ,
Has anyone faced this kind of issue, request to post your comments..
Edited by: Abbriti on Mar 25, 2010 2:36 PM

Similar Messages

Diff between init with data transfer and repair full request

hi,
i have observed that even in the new flow we are doing init without data transfer and then repair full request
if i do init with data transfer also i can achieve the same?
i want to know why we need to do this ,do we have any advantage of doing init without transfer and repair full request?
please suggest me

Hi Venkat,
A repair full request is loaded in cases where you get erroneous records or where there are missing records which you want to load. In such cases, a repair full request for the selective records can be loaded and is the most efficient way to correct the data, since you won't be required to load the entire data once again. Also you acheive the desired result without disturbing the delta. (You are not required to do an init w/o data transfer after a repair full, people just do it a a precaution)
However, repair full requests should only be loaded to infoproviders with update mode 'overwrite'. Otherwise, if the InfoProvider, its very probable that you might double the value of the key-figures due to rows being added twice - in case of an InfoProvider with update mode 'Additive'. So, if your InfoProvider is additive, you will need to delete the entire data and do an 'init with data transfer' to avoid corrupting the data. (Note: you can do a repair full request for an additive infoprovider in case of lost records or if you can delete erroneous records with selective deletion.But you have to be careful with the selections lest you inadvertently load other records than required and corrupt the data)

Source for Init with data transfer and full load

Hi Experts,
1. Please tell me where the data comes when we do the
    following actions :-
    a) Init with data transfer
    b) Full load
i want to know the source of data i.e (setup table or main table or any other table)
Helpful if you can provide the data-flow.
kindly tell which is prefrable and why?
Regards,
RG

Hi.......
When you do init with data transfer it will read data from the set up table only..........but beside this it will also set the init flag..........due to this from next time any new records will go to the delta queue...........and next time when you run delta load it will pick records from delta queue...........
Now suppose data are alrady available in the BW side...........then you can run init without data transfer.......this will only set the init flag.........it will not pick any records.........
Extraction structure gets data from set up table in case of full upload ............and in case of delta load from delta queue.......
Regards,
Debjani...........
Edited by: Debjani Mukherjee on Sep 20, 2008 11:45 AM

Error loading serialized session data

Could anyone please suggest how to fix this issue. We run 2 Solaris servers
          running WL5.1 SP8:
          Thank you!
          Fri Jan 12 16:23:43 PST 2001:<E> <HttpSessionContext> Error loading
          serialized session data for session
          OlzPsQ2ZCGETxLZsvwig2hgGGyZEU4opBHfSaq1P02MlsbGKNK64QcKLS3JTa0QJZyZxdjVIY5k3
          |5212765075526534138/-1062730671/6/80/80/7002/7002/80/-1
          java.io.InvalidClassException:
          weblogic.servlet.internal.session.SessionData; Local class not compatible:
          stream classdesc serialVersionUID=2475912102520200080 local class
          serialVersionUID=8380332519449050139
          at java.lang.Throwable.fillInStackTrace(Native Method)
          at java.lang.Throwable.fillInStackTrace(Compiled Code)
          at java.lang.Throwable.<init>(Compiled Code)
          at java.lang.Exception.<init>(Compiled Code)
          at java.io.IOException.<init>(Compiled Code)
          at
          java.io.ObjectStreamException.<init>(ObjectStreamException.java:29)
          at
          java.io.InvalidClassException.<init>(InvalidClassException.java:47)
          at java.io.ObjectStreamClass.validateLocalClass(Compiled Code)
          at java.io.ObjectStreamClass.setClass(Compiled Code)
          at java.io.ObjectInputStream.inputClassDescriptor(Compiled Code)
          at java.io.ObjectInputStream.readObject(Compiled Code)
          at java.io.ObjectInputStream.readObject(Compiled Code)
          at java.io.ObjectInputStream.inputClassDescriptor(Compiled Code)
          at java.io.ObjectInputStream.readObject(Compiled Code)
          at java.io.ObjectInputStream.readObject(Compiled Code)
          at java.io.ObjectInputStream.inputObject(Compiled Code)
          at java.io.ObjectInputStream.readObject(Compiled Code)
          at java.io.ObjectInputStream.readObject(Compiled Code)
          at
          weblogic.servlet.internal.session.FileSessionContext.loadSession(FileSession
          Context.java:467)
          at
          weblogic.servlet.internal.session.FileSessionContext.invalidateSession(FileS
          essionContext.java:391)
          at
          weblogic.servlet.internal.session.SessionContext$SessionInvalidator.invalida
          teSessions(Compiled Code)
          at
          weblogic.servlet.internal.session.SessionContext$SessionInvalidator.trigger(
          SessionContext.java:479)
          at
          weblogic.time.common.internal.ScheduledTrigger.executeLocally(Compiled Code)
          at weblogic.time.common.internal.ScheduledTrigger.execute(Compiled
          Code)
          at weblogic.time.server.ScheduledTrigger.execute(Compiled Code)
          at weblogic.kernel.ExecuteThread.run(Compiled Code)
          java.io.InvalidClassException:
          weblogic.servlet.internal.session.SessionData; Local class not compatible:
          stream classdesc serialVersionUID=2475912102520200080 local class
          serialVersionUID=8380332519449050139
          at java.lang.Throwable.fillInStackTrace(Native Method)
          at java.lang.Throwable.fillInStackTrace(Compiled Code)
          at java.lang.Throwable.<init>(Compiled Code)
          at java.lang.Exception.<init>(Compiled Code)
          at java.io.IOException.<init>(Compiled Code)
          at
          java.io.ObjectStreamException.<init>(ObjectStreamException.java:29)
          at
          java.io.InvalidClassException.<init>(InvalidClassException.java:47)
          at java.io.ObjectStreamClass.validateLocalClass(Compiled Code)
          at java.io.ObjectStreamClass.setClass(Compiled Code)
          at java.io.ObjectInputStream.inputClassDescriptor(Compiled Code)
          at java.io.ObjectInputStream.readObject(Compiled Code)
          at java.io.ObjectInputStream.readObject(Compiled Code)
          at java.io.ObjectInputStream.inputClassDescriptor(Compiled Code)
          at java.io.ObjectInputStream.readObject(Compiled Code)
          at java.io.ObjectInputStream.readObject(Compiled Code)
          at java.io.ObjectInputStream.inputObject(Compiled Code)
          at java.io.ObjectInputStream.readObject(Compiled Code)
          at java.io.ObjectInputStream.readObject(Compiled Code)
          at
          weblogic.servlet.internal.session.FileSessionContext.loadSession(FileSession
          Context.java:467)
          at
          weblogic.servlet.internal.session.FileSessionContext.invalidateSession(FileS
          essionContext.java:391)
          at
          weblogic.servlet.internal.session.SessionContext$SessionInvalidator.invalida
          teSessions(Compiled Code)
          at
          weblogic.servlet.internal.session.SessionContext$SessionInvalidator.trigger(
          SessionContext.java:479)
          at
          weblogic.time.common.internal.ScheduledTrigger.executeLocally(Compiled Code)
          at weblogic.time.common.internal.ScheduledTrigger.execute(Compiled
          Code)
          at weblogic.time.server.ScheduledTrigger.execute(Compiled Code)
          at weblogic.kernel.ExecuteThread.run(Compiled Code)


It might cause by inconsistent service patch and/or versions among your
          servers in your cluster. Double check the installation, especially
          classpathes of all your servers. Make sure you apply SP8 correctly in all
          servers.
          Cheers - Wei
          "Andre Taube" <[email protected]> wrote in message
          news:[email protected]...
          > Could anyone please suggest how to fix this issue. We run 2 Solaris
          servers
          > running WL5.1 SP8:
          >
          > Thank you!
          >
          >
          > Fri Jan 12 16:23:43 PST 2001:<E> <HttpSessionContext> Error loading
          > serialized session data for session
          >
          OlzPsQ2ZCGETxLZsvwig2hgGGyZEU4opBHfSaq1P02MlsbGKNK64QcKLS3JTa0QJZyZxdjVIY5k3
          > |5212765075526534138/-1062730671/6/80/80/7002/7002/80/-1
          > java.io.InvalidClassException:
          > weblogic.servlet.internal.session.SessionData; Local class not compatible:
          > stream classdesc serialVersionUID=2475912102520200080 local class
          > serialVersionUID=8380332519449050139
          > at java.lang.Throwable.fillInStackTrace(Native Method)
          > at java.lang.Throwable.fillInStackTrace(Compiled Code)
          > at java.lang.Throwable.<init>(Compiled Code)
          > at java.lang.Exception.<init>(Compiled Code)
          > at java.io.IOException.<init>(Compiled Code)
          > at
          > java.io.ObjectStreamException.<init>(ObjectStreamException.java:29)
          > at
          > java.io.InvalidClassException.<init>(InvalidClassException.java:47)
          > at java.io.ObjectStreamClass.validateLocalClass(Compiled Code)
          > at java.io.ObjectStreamClass.setClass(Compiled Code)
          > at java.io.ObjectInputStream.inputClassDescriptor(Compiled Code)
          > at java.io.ObjectInputStream.readObject(Compiled Code)
          > at java.io.ObjectInputStream.readObject(Compiled Code)
          > at java.io.ObjectInputStream.inputClassDescriptor(Compiled Code)
          > at java.io.ObjectInputStream.readObject(Compiled Code)
          > at java.io.ObjectInputStream.readObject(Compiled Code)
          > at java.io.ObjectInputStream.inputObject(Compiled Code)
          > at java.io.ObjectInputStream.readObject(Compiled Code)
          > at java.io.ObjectInputStream.readObject(Compiled Code)
          > at
          >
          weblogic.servlet.internal.session.FileSessionContext.loadSession(FileSession
          > Context.java:467)
          > at
          >
          weblogic.servlet.internal.session.FileSessionContext.invalidateSession(FileS
          > essionContext.java:391)
          > at
          >
          weblogic.servlet.internal.session.SessionContext$SessionInvalidator.invalida
          > teSessions(Compiled Code)
          > at
          >
          weblogic.servlet.internal.session.SessionContext$SessionInvalidator.trigger(
          > SessionContext.java:479)
          > at
          > weblogic.time.common.internal.ScheduledTrigger.executeLocally(Compiled
          Code)
          > at weblogic.time.common.internal.ScheduledTrigger.execute(Compiled
          > Code)
          > at weblogic.time.server.ScheduledTrigger.execute(Compiled Code)
          > at weblogic.kernel.ExecuteThread.run(Compiled Code)
          >
          > java.io.InvalidClassException:
          > weblogic.servlet.internal.session.SessionData; Local class not compatible:
          > stream classdesc serialVersionUID=2475912102520200080 local class
          > serialVersionUID=8380332519449050139
          > at java.lang.Throwable.fillInStackTrace(Native Method)
          > at java.lang.Throwable.fillInStackTrace(Compiled Code)
          > at java.lang.Throwable.<init>(Compiled Code)
          > at java.lang.Exception.<init>(Compiled Code)
          > at java.io.IOException.<init>(Compiled Code)
          > at
          > java.io.ObjectStreamException.<init>(ObjectStreamException.java:29)
          > at
          > java.io.InvalidClassException.<init>(InvalidClassException.java:47)
          > at java.io.ObjectStreamClass.validateLocalClass(Compiled Code)
          > at java.io.ObjectStreamClass.setClass(Compiled Code)
          > at java.io.ObjectInputStream.inputClassDescriptor(Compiled Code)
          > at java.io.ObjectInputStream.readObject(Compiled Code)
          > at java.io.ObjectInputStream.readObject(Compiled Code)
          > at java.io.ObjectInputStream.inputClassDescriptor(Compiled Code)
          > at java.io.ObjectInputStream.readObject(Compiled Code)
          > at java.io.ObjectInputStream.readObject(Compiled Code)
          > at java.io.ObjectInputStream.inputObject(Compiled Code)
          > at java.io.ObjectInputStream.readObject(Compiled Code)
          > at java.io.ObjectInputStream.readObject(Compiled Code)
          > at
          >
          weblogic.servlet.internal.session.FileSessionContext.loadSession(FileSession
          > Context.java:467)
          > at
          >
          weblogic.servlet.internal.session.FileSessionContext.invalidateSession(FileS
          > essionContext.java:391)
          > at
          >
          weblogic.servlet.internal.session.SessionContext$SessionInvalidator.invalida
          > teSessions(Compiled Code)
          > at
          >
          weblogic.servlet.internal.session.SessionContext$SessionInvalidator.trigger(
          > SessionContext.java:479)
          > at
          > weblogic.time.common.internal.ScheduledTrigger.executeLocally(Compiled
          Code)
          > at weblogic.time.common.internal.ScheduledTrigger.execute(Compiled
          > Code)
          > at weblogic.time.server.ScheduledTrigger.execute(Compiled Code)
          > at weblogic.kernel.ExecuteThread.run(Compiled Code)
          >
          >

Error :Unable to retrieve data from iHTML servlet for Request2 request

I open bqyfile to use HTML in workspace.
When I export report to excel in IR report.
Then I press "back" button I get error"Unable to retrieve data from iHTML servlet for Request2 request "
And I can not open any bqyfiles in workspace.
Anybody gat the same question? Thanks~

Hi,
This link will be helpful, the changes is made in the TCP/IP parameter in the registry editor of Windwos machine. I tried the 32 bit setting for my 64 bit machine (DWORD..) and it worked fine for me..
http://timtows-hyperion-blog.blogspot.com/2007/12/essbase-api-error-fix-geeky.html
Hope this helps..

Error while reading access data (URL, user,password) for the Adapter Engine

Hi,
Any idea on below message? I am doing file to file scenario and got the below tarce from sxmb_moni.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">AE_DETAILS_GET_ERROR</SAP:Code>
<SAP:P1>af.pi1.piserver1</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>no_messaging_url_found: Unable to find URL for Adapter Engine af.pi1.piserver1</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while reading access data (URL, user, password) for the Adapter Engine af.pi1.piserver1</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Thanks
Balaji

It looks like the adapter engine is not able to register him self on SLD, you have to check in the SLD the "Exchange Infrastructure" domain, you have to verify restarting the J2EE the adapter engine update the entries in the SLD related to the specific XI Domain.
Launch Visual Administrator >> Server >> Services >> SAP AF CPA Cache
Enter the appropriate values for:
SLD.selfregistration.hostname (Use fully qualified hostname)
SLD.selfregistration.httpPort
SLD.selfregistration.httpsPort
Sandro

Error while reading access data (URL, user, password) for the Adapter Engin

Hi all,
I encountered a red flag in sxmb_moni and when I click on the flag, I get the following message:
Error while reading access data (URL, user, password) for the Adapter Engine
Is there any way I can resolve this? thanks all
Regards,
IX

Possible reason is Adapter engine is not registered on SLD. Check in SLD.
You can also try restarting J2EE adapter engine and update SLD entries specific to XI domain.
Lauch Visual admin go to Server > services > SAP AF CPA Cache
Enter the appropriate values for:
SLD.selfregistration.hostname (Use fully qualified hostname)
SLD.selfregistration.httpPort
SLD.selfregistration.httpsPort
Finally, if all the above seem to be correct check the userID / pwd for user ID : PI*.

# of records in a full load dont square with d # in an Init with data trans

Heallo to all BI/FI SDNer's,
FI AP n AR extractors like 0FI_AR_3 & 0FI_AP_3 pull 1785 records to PSA when loaded full but an Init with datatransfer for the same pull only 1740 records to PSA.
I am very skeptical dat even a delta aft a repair full will not bring all records.
What update methodologies are qualified for AP & AR ?
OSS notes I found really dont answer my concern here......please comment SDNer's !!!
Message was edited by:
Jr Roberto

Somehow it worked after redoing !!

Getting error during activation of data request in DSO.

Hello All
I am sending data in DSO by running DTP. evrythg goes in green . But as i try to activate the data request in DSO it is giving me error. Kindly tell the how to solve this.in log error meassage is like following .
Error while inserting data records for data package
Analysis of package terminated due to too many duplicates being found
Process 000000 returned with errors
Incorrect data records (duplicates) found
Data records are in the data package more than once.
regards

Saurabh
Sorry that option would only be available for Master Data Attrib /text.
Please check if the in DSO Settings ...Unique Data Records -
> Is this checked? if yes , you need to change it from DEV.
For a temporary solution, you need to find out which records are creating duplicate entries. If you can load them separately via some restriction in DTP , it would get loaded and then activate one request each time.
Whole objective is not have same Key combination more than once in a data package.
Try put a restriction on Update MOde i.e filter on Update Mode ( one by one X, blank, A, D, N etc) and see if you can load them.
Regards
Anindya

Error loading 0employee master data

Hello
I am facing some weird kind of probelm when i try to load data of 0EMPLOYEE_ATTR. im trying to load data of first 100 employes. data size is very small. in data monitor after few seconds it display the error message with caller09. it seems to me like somebody is trying to change data in ecc but i have chked it on the weekend when nobody was accessing the ecc system and tried to upload but unseccessful.
there are no trfc in the source system, i have also check the prcoess overview and job overview but nothing is helpful. in job overview in the log i just get memory parameters and nothing else. memory parameters are fine as othere datasources are loading data even with 1 milllion records but 0empoyee_attr i am facing for the first 100 records.
i have chked though slg1, rsdmd and me_del, its k.
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.

Hi,
If you are loading from flatfile then check the file for the two fields Date from and date to.
Or you can see the problem with the records in PSA also...
Check whether the date format is correct and also the date to should be more that the date from..
Cheers
Siva Reddy
Edited by: Siva Reddy S on Jul 10, 2008 3:29 PM
Edited by: Siva Reddy S on Jul 10, 2008 3:30 PM

Load Grid with data from System.Data.DataTable

Hi all.
A have a System.Data.DataTable e need load a grid with data from this DataTable.
How Load a Grid with data from System.Data.DataTable?

Hi Francisco,
actually i don't think that you can use a .NET datatable to fill a business one grid.
the business one has it's own datatable.
in c# it would look like this:
oForm.DataSources.DataTables.Add("MyDataTable");
((SAPbouiCOM.Grid)(oForm.Items.Item("grid").Specific)).DataTable = oForm.DataSources.DataTables.Item("MyDataTable");
oForm.DataSources.DataTables.Item(0).ExecuteQuery("SELECT Field FROM [dbname].dbo.TABLE");
((SAPbouiCOM.Grid)(oForm.Items.Item("grid").Specific)).CollapseLevel = 1;
((SAPbouiCOM.Grid)(oForm.Items.Item("grid").Specific)).AutoResizeColumns();
((SAPbouiCOM.Grid)(oForm.Items.Item("grid").Specific)).SelectionMode = SAPbouiCOM.BoMatrixSelect.ms_Single;
good night
lg David

ERROR: filter condition with date range

Oracle db; 11g r2
ODI: 11.1.1.3
I have an interface with filter on date column as follows
DATE_MODIFIED >'14-JUN-2012' This is working fine.
But when change the date value to
DATE_MODIFIED >'01-MAY-2012' then I am getting this following error,
942 : 42000 : java.sql.BatchUpdateException: ORA-00942: table or view does not exist
942 : 42000 : java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
java.sql.BatchUpdateException: ORA-00942: table or view does not exist
at oracle.jdbc.driver.DatabaseError.throwBatchUpdateException(DatabaseError.java:629)It seems anything more that 29 days I am getting this error.
Even I have tried this also
add_months(sysdate,-2), still I am getting the same error
I think that I am missing something here but any help would be greatly appreciated.
Thanks,

Is it still works fine with '14-JUN-2012' and doesn't work with '01-MAY-2012'?
Yes, It's true
Try:
1) Use your datastore prefixes in filters & mappings
*could you please let me know, what does this means datastore prefixes in filters & mappings *
2) Avoid implicit conversions, especially with DATE type
I am not sure on this, how to do the Avoid implicit conversions
Thanks,

Load rows with date fileds include time

Hi, I need to load rows with SQLLoader. The data has am field with date and time but using mask don4t load the time, only date. How do I load date and time?
Thanks...

The following should work to load both the date and time (as long as it is not rejected for some reason)date_cancel date "YYYY/MM/DD HH24:MI:SS"To display the date and time after it has been loaded, you will have to use on of the following:ALTER SESSION SET NLS_DATE_FORMAT = 'DD-MON-YYYY HH:MI:SS AM';
or
SELECT to_char(<column_name,'DD-MON-YYYY HH:MI:SS AM') from <table_name>;

Error installing SQL Server Data Tools - Business Intelligence for Visual Studio 2013

Hi
I am trying to install SQL Server Data Tools - Business Intelligence for Visual Studio 2013 and am getting the following error
This installation package could not be opened. Contact the application vendor to verify that this is a valid Windows Installer package.
I am running
Windows 8.1 x64
SQL Server 2014 Developer Edition x64
Visual Studio 2013 Professional
Any help would be appreciated.
Thanks
Biztalk Developer

Could you please check if Windows Installer service is running and is in automatic startup mode.
The other thing is, if you’re running an x64-based SQL instance (64-bit), make sure to select “New Instance” on the Installation Type page, and NOT “Add features to an existing instance”.
http://stackoverflow.com/questions/24989187/64-bit-microsoft-sql-server-data-tools

Urgent: Data Loading error(Load failed with Short Dump) caller 70 missing

Hi please go through the error occured.
<b>"Request is still running.
Diagnosis:
No error could be found. The current process has probably not finished yet.
System Response:
The ALE Inbox of the SAP BW is identical to ALE Outbox of the source System and /or the maximum wait time for this request has not yet run out and/or the batch job in the cource system has not ended.
current status
in the source sytem."</b>
Update mode: Full, processing Online.
I think we processed the infopackage in the online. if we process it in the back ground then we won't face any problem. Singal turns to Red.
Please guide us. we need to load it immidiately.
Thanks in advance.
Regards,
Nagesh.
Message was edited by: Nagesh Ganisetti
Message was edited by: Nagesh Ganisetti

Hi Friends,
   at last the load has Terminated with Short Dump. Can any one guide me how can i reslove this. we could see the data in PSA.
i'm sending the part of the short dump.
Too many parameters specified with PERFORM.
What happened?
In a subroutine call, there were more parameters than in the routinedefinition.
Error in ABAP application program.
The current ABAP program "GP3KGSUXARXPB2F9YCR4B3MFPT6 " had to be terminated because one of statements could not be executed.
This is probably due to an error in the ABAP program.
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
is especially useful if you want to keep a particular message.
Error analysis
A PERFORM was used to call the routine "VALUE_TO_SID_CONVERT_DB" of the program
"GP3KGSUXARXPB2F9YCR4B3MFPT6 ".
This routine contains exactly 7 formal parameters, but the current
call contains 8 actual parameters.
parameters.
How to correct the error
Correct the PERFORM call. You can find out where the call occurs in the section "Active calls / events".
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
Please guide me.
Regards,
Nagesh.
Message was edited by: Nagesh Ganisetti

Error loading init with data request in BW for 0mat_plnt

Similar Messages

Maybe you are looking for