Error loading IOS to 2916

For some reason, when I try and load and image into my 2916, it errors out saying "flash:c2900xl-c3h2s-mz-120-5.WC9.bin: no space left
on device".
I have tried this severla times. The ony thing I can see that should be taking up memory, is the env_vars file under flash:.
Is there somewhere else I can look to see what it won't take it? It seems as though there should be enough room.
My other option would be an older IOS that maybe a smaller file size. When I do the XModem transfer, it gets to about 1687k, and then terminates itself due to lack of space.
Any ideas??
Thanks in advance.

Well low and behold I hadn't searched enough!! I finally found a posing about an FTP Site where there are images for these older switches!
Now, I am not able to find anything about the HTML interface. The GUI for the web based management for this switch. I was able to find it all, but when I tried copying it over, it kept saying I was trying to copy the file to a fold, and it could not be completed. The syntax I was using was:
copy tftp:/// flash:/html
It didn't seem to like that. Is there some way I can copy all of the files for the html pages at once, or do I have to do them individually? UGG!!
The version I ended up with is the c2900XL-hs-mz-112.8.11-SA6.bin. In the .tar I got off the FTP Site, It also included a folder called HTML, that has what looks like all of the correct pages that I am looking for in the Web based management.
I guess the thing I'm really trying to do, is copy all of these at once, to a directory under the flash of my 2916.
Clues?? I sure don't have one!!
Thanks all!

Similar Messages

  • Errors loading iOS 8

    CCan't seem to successfully load iOS 8. Anyone having similar problems.

    lsutigerdadonthebayou wrote:
    CCan't seem to successfully load iOS 8. Anyone having similar problems.
    Base on your question, no.
    Maybe a little bit more details on what error message you are getting when you try to update the IOS.

  • HT5052 Error loading iOS 5.1.1

    I have an update notice on my iPad2, but keep getting an error message.

    I think when you downloaded ios it didnt fully download and some of the files where missing, if all the features are there and it boots up justignore it.If not then redownload your firmware

  • Error saying router cant load IOS from flash but, boots fine anyway???

    I get this error upon bootup of my 3640 router.
    "%SYS-3-IMAGE_TOO_BIG: 'flash:c3640-is-mz.122-34.bin' is too large for available memory (10590520 bytes).boot
    of "c3640-is-mz.122-34.bin" using boot helper "flash:c3640-is-mz.122-34.bin" failed
    error returned: File read failed -- Not enough space
    loadprog: error - on file open
    boot: cannot load "c3640-is-mz.122-34.bin"
    I have this boot statement:
    boot system flash c3640-is-mz.122-34.bin
    Here's what my show flash looks like:
    System flash directory:
    File Length Name/status
    1 11336892 c3640-is-mz.122-34.bin
    [11336956 bytes used, 4915968 available, 16252924 total]
    16384K bytes of processor board System flash (Read/Write)
    Like I said, router boots fine but what does this error mean?
    *I also get this upon boot*
    Smart Init is disabled. IOMEM set to: 10
    Using iomem percentage: 10

    thank you sundar, I've loaded IOS version c3640-is-mz.121-27b.bin and the router booted up fine with the previous errors.
    However...........upon bootup the router is trying to load "call rsvp-sync" and "dial-peer cor custom"
    Cisco Internetwork Operating System Software
    IOS (tm) 3600 Software (C3640-IS-M), Version 12.1(27b), RELEASE SOFTWARE (fc1)
    Copyright (c) 1986-2005 by cisco Systems, Inc.
    Compiled Tue 16-Aug-05 23:45 by pwade
    Image text-base: 0x60008940, data-base: 0x60DF0000
    cisco 3640 (R4700) processor (revision 0x00) with 45056K/4096K bytes of memory.
    Processor board ID 29401551
    R4700 CPU at 100Mhz, Implementation 33, Rev 1.0
    Bridging software.
    X.25 software, Version 3.0.0.
    SuperLAT software (copyright 1990 by Meridian Technology Corp).
    2 Ethernet/IEEE 802.3 interface(s)
    1 FastEthernet/IEEE 802.3 interface(s)
    4 Serial network interface(s)
    DRAM configuration is 64 bits wide with parity disabled.
    125K bytes of non-volatile configuration memory.
    16384K bytes of processor board System flash (Read/Write)
    call rsvp-sync
    ^
    % Invalid input detected at '^' marker.
    dial-peer cor custom
    ^
    % Invalid input detected at '^' marker.
    Press RETURN to get started!
    How do I stop this???
    Upon bootup I receive this message too.
    program load complete, entry point: 0x80008000, size: 0x81c7a4
    Self decompressing the image : ##############################################################################
    ###################################################################################################### [OK]
    PassedPassedPassedPassed
    %SYS-4-CONFIG_NEWER: Configuration from version 12.2 may not be correctly understood
    %SYS-6-BOOT_MESSAGES: Messages above this line are from the boot loader.
    program load complete, entry point: 0x80008000, size: 0x81c7a4
    Self decompressing the image : ############################################################################## [OK]
    Does the router still think 12.2 is in their somewhere?
    Is that because I have this boot statement?
    boot system flash c3640-is-mz.121-27b.bin
    output of show ver:
    router#sh ver
    Cisco Internetwork Operating System Software
    IOS (tm) 3600 Software (C3640-IS-M), Version 12.1(27b), RELEASE SOFTWARE (fc1)
    Copyright (c) 1986-2005 by cisco Systems, Inc.
    Compiled Tue 16-Aug-05 23:45 by pwade
    Image text-base: 0x60008940, data-base: 0x60DF0000
    ROM: System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
    router uptime is 9 minutes
    System returned to ROM by reload
    System image file is "flash:c3640-is-mz.121-27b.bin"
    cisco 3640 (R4700) processor (revision 0x00) with 45056K/4096K bytes of memory.
    Processor board ID 29401551
    R4700 CPU at 100Mhz, Implementation 33, Rev 1.0
    Bridging software.
    X.25 software, Version 3.0.0.
    SuperLAT software (copyright 1990 by Meridian Technology Corp).
    2 Ethernet/IEEE 802.3 interface(s)
    1 FastEthernet/IEEE 802.3 interface(s)
    4 Serial network interface(s)
    DRAM configuration is 64 bits wide with parity disabled.
    125K bytes of non-volatile configuration memory.
    16384K bytes of processor board System flash (Read/Write)
    Configuration register is 0x2102
    output of show flash:
    router#sh flash
    System flash directory:
    File Length Name/status
    1 8505536 c3640-is-mz.121-27b.bin
    [8505600 bytes used, 8271616 available, 16777216 total]
    16384K bytes of processor board System flash (Read/Write)
    router#

  • Catalyst 3550: Loading IOS via TFTP from ROMmon?

    Hi everybody,
    I need to load an IOS from ROMmon-mode to a Catalyst 3550.
    Of cause I could do that via xmodem but I thought it should also be possible via TFTP.
    What I did:
    switch: IP_ADDRESS=192.168.1.1
    switch: IP_SUBNET_MASK=255.255.255.0
    switch: TFTP_SERVER=192.168.1.2
    switch: TFTP_FILE=c3550-ipservicesk9-mz.122-35.SE5.bin
    switch: DEFAULT_GATEWAY=192.168.1.1
    switch: set
    BOOT=tftp://192.168.1.2/c3550-ipservicesk9-mz.122-35.SE5.bin
    DEFAULT_GATEWAY=192.168.1.1
    IP_ADDRESS=192.168.1.1
    IP_SUBNET_MASK=255.255.255.0
    MAC_ADDR=00:0F:90:7F:B1:00
    MODEL_NUM=WS-C3550-48-SMI
    MODEL_REVISION_NUM=L0
    MOTHERBOARD_ASSEMBLY_NUM=73-5701-09
    MOTHERBOARD_REVISION_NUM=A0
    MOTHERBOARD_SERIAL_NUM=CAT08130PUT
    POWER_SUPPLY_PART_NUM=34-0967-02
    POWER_SUPPLY_SERIAL_NUM=DTH08094HH7
    SYSTEM_SERIAL_NUM=CAT0813Z29A
    TFTP_FILE=c3550-ipservicesk9-mz.122-35.SE5.bin
    TFTP_SERVER=192.168.1.2
    switch: boot tftp://192.168.1.2/c3550-ipservicesk9-mz.122-35.SE5.bin
    Loading "tftp://192.168.1.2/c3550-ipservicesk9-mz.122-35.SE5.bin"...tftp://192.168.1.2/c35 50-ipservicesk9-mz.122-35.SE5.bin: permission denied
    Error loading "tftp://192.168.1.2/c3550-ipservicesk9-mz.122-35.SE5.bin"
    Interrupt within 5 seconds to abort boot process.
    Boot process failed...
    switch: boot
    Loading "tftp://192.168.1.2/c3550-ipservicesk9-mz.122-35.SE5.bin"...tftp://192.168.1.2/c35 50-ipservicesk9-mz.122-35.SE5.bin: permission denied
    Error loading "tftp://192.168.1.2/c3550-ipservicesk9-mz.122-35.SE5.bin"
    Interrupt within 5 seconds to abort boot process.
    Boot process failed...
    Am I doing something wrong or is it generally impossible to load an IOS via TFTP to a 3550?
    Thanks in advance
    Rolf

    I am pretty sure you can't boot from a TFTP server with the Catalyst 3550 (or any of the other standalone access switches - 2950, 3550, 3560 3750 etc). If you want to recover one you need to recover it using XModem via the console:
    http://www.cisco.com/en/US/products/hw/switches/ps628/products_tech_note09186a0080169696.shtml
    I used to think you had to do this at 9600-baud, however you can increase the baudrate and it only takes 10-20 minutes (I couldn't get 115200 to work but 57600 worked OK and took about 20-minutes).
    You need to remember to put the baud rate back to 9600 when the image is back on as it gets stored in NVRAM and reboots etc are at the stored speed (i.e. changing it after it has booted under the line con 0 doesn't get saved to NVRAM).
    HTH
    Andy

  • Error loading player html5 player not found safari

    (Ipad Air Cellular 64gb)
    The problem is : it is impossible to read and run the streaming video ('KTO en direct') on the site  'http://www.ktotv.com/'  with the Safari or Google Chrome Web Browsers. The message error is as follows : ' Error loading player html5 player not found '.
    So, the problem is not depending on Web Brower used but it is due to the operating system (iOS 7).
    However, this streaming video is running very well with a PC equipped with the OS Windows 7 whatever the Web Browsers used (Firefox, Google Chrome, IE11).
    I think it is important to indicate this bug to Apple !
    Thank you in advance for your support.

    This sounds like a website bug possibly. What site?

  • Any problems loading IOS 8 on iphone 4s?

    Loading iOS 8 onto my Iphone 4s a got an error 29 - has anyone else had this>

    Hi jaspardog,
    Thanks for the question. Based on what you stated, it seems like you are trying to update to iOS 8 and are getting an error. I would recommend that you read this article, it may be able to help you isolate or resolve the issue.
    Resolve iOS update and restore errors - Apple Support
    Check for hardware issues
    Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
    These errors mean that your device or computer may have a hardware issue that's preventing the update or restore from completing.
    Check that your security software and settings aren't preventing your device from communicating with the Apple update server.
    Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
    Confirm that your security software and settings are allowing communication between your device and update servers.
    If you still see the error message when you update or restore, contact Apple support.
    Thanks for using Apple Support Communities.
    Cheers,
    Mario

  • Error loading player, no Playable source found wp8

    hi I have a url  http://54.179.170.143/multitvfinal/index.php/details?id=37&type=live&device=ios
    when I Navigate this url in to my Wp8 webBrowser then it is giving me error 
    ths error is 
    Error loading Player no Playable source found.
    my code is wb.Navigate(new uri("http://54.179.170.143/multitvfinal/index.php/details?id=37&type=live&device=ios",UriKind.Absolute);

    hi I have a url which is playing in desktop IE Web Browser but not playing in wp8 web browser
    here is my url
    http://54.179.170.143/multitvfinal/index.php/details?id=37&type=live&device=ios

  • IPad says error loading player no playable sources found

    IPad stopped playing flash type video. It says there was an error loading the message. No playable sources found

    in general ios devices do not support flash but try this
    reset all settings
    settings-general-reset-reset all settings
    now reconnect to wifi
    settings- wifi- click network name- enter password - join
    if issue persists back up and restore as new via iTunes
    Peace, Clyde

  • Error message when starting Adobe Illustrator CC [Error loading plugins   AppBarControls.aip]

    Hello,
    I get the following error message when I start Adobe Illustrator CC.
    Error loading plugins
    AppBarControls.aip
    Then it gives me the option to continue by clicking okay. When it opens, the Application Bar is just blank.
    I've tried uninstalling, then ran Adobe CC Cleaner, then downloaded and reinstalled.
    Computer details : OS X 10.9.5, 1.3 GHz Intel Core i5, 8 GB 1600 MHz DDR3
    Help is kindly appreciated!

    I also have had a difficult time with Adobe Illustrator CC 2014 crashing upon launch.  The support staff was great even though we had to work through several sessions.  Below is the email explaining our final session.
    This email is in regards with the issue you had been facing with Illustrator CC 2014.
    While going through the installer logs, we found that there was an issue with the installation & the program installer had been denied access to several critical files & folders during installation.
    This was the main reason for Illustrator crash as several critical components had not been installed properly.
    We tried installing the program in a new user account & that worked.
    Though the program has been installed properly now & is working in your old account, I will still strongly recommend you to get your computer user account repaired with a Windows 7 operating system diskette.
    This is required so that you do not run into more trouble later while working with the Adobe Applications or even while installing other programs.
    Avanish Divya was the final support person that successfully resolved my problems.

  • Having problems with Bridge shutting down after saving photo in PS Cs5,,,,,,,,,  Also when i attempt to update either PS or bridge get an error message in Adobe application manger "Error loading updater workflow"

    Having problems with Bridge shutting down after saving photo in PS Cs5,,,,,,,,,  Also when i attempt to update either PS or bridge get an error message in Adobe application manger "Error loading updater workflow"

    Sorry for the late reply. My email firewall has become a little over zealous & sent a lot of my emails straight to my junk email folder, so I have only just now discovered your reply in my junk mail folder.
    The only "don't open files exceeding xxx megabytes" instruction I can find in my Prefs, is in the Bridge Prefs for Thumbnails, & mine is set at 1000mb. The biggest files I handle are bigger than 200mb so I should be able to open a few, not just one.
    However, this doesn't explain why I can open a psd format file of 180mb, close it, but then can't open a RAW format file of only 26mb immediately after.
    I can open the RAW file only if I restart my computer - very annoying!
    However, thanks for the advice about the video card & memory.
    So, I'm still stuck as to what the issue is.

  • Key figure definition in BEx gives "Error loading template 0QUERY_TEMPLATE"

    Hi,
    On a BI 7.0 system I try to run a query in the BEx Analyzer and after I have the result in Excel. I wants to see the key figure definition by right clicking in a data cell.
    Then I get this error message after the browser has started up.
    Error loading template 0QUERY_TEMPLATE
    Notification Number BRAIN 276  
    Any ideas how this can be?
    Kind regards, Bjarne

    hi,
    Please check the below path in BI and set the template "0ANALYSIS_PATTERN" there:
    SPRO ->SAP Netweaver -> BI ->Settings for reporting and analysis ->BEX Web -> Set Standard Web Templates -> Ad-hoc analysis -> set the above template and save it.
    check wether it works afterwords or not.
    This is the standard web template called every time when we execute our query's.
    Thanks
    Dipika

  • Cannot install Firefox. WHen I click on the link to install, it takes me to an "error loading page" notice. My network connection and internet access are normal with Internet Explorer, so this is not the issue. Some kind of conflict with my settings or pe

    Cannot install Firefox. When I click on the link on the Mozilla website, it goes to an "error loading page". My network connection and Internet Explorer are fuctioning normally.
    == computer was recently wiped clean and am now reinstalling all previous software and applications ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; .NET CLR 1.1.4322; .NET CLR 2.0.50727)

    None of the stuff in " http://kb.mozillazine.org/Locked_or_damaged_places.sqlite " helps. I have tried and tried and I have even wipe the computer clean still didn't help. I got the same problem as he/she has got in the first posted. Can add some web pages but not all the web pages I want.. I should have never updated to 3.6.13... That's when it all started for me, from that version..... Now Version 3.6.14 is out, I was hoping the version 3.6.14 might would fix the problem wrong again....
    Funny thing is i can not even Bookmark Firefox.com!!!!!...lol
    So any ideas on how to fix it other than the link giving would help.
    Thanks.

  • 'Error loading plugin: Plugin file not found' message on ONLY 5 sites, but all others OK.  Help, please!

    Hi Again!
    I posted this problem here before, but since I really need to access the sites that receive this error message in less than a month, I had to re-post; hopefully someone who didn't see it before will see it & have a solution for me.
    Here are the details:  I'm running windows 8.1 & I use Firefox 33.1.1, Pale Moon 25.1.0 or Opera 26.0 as my browsers, (I have IE installed & up-to-date, but I never use it).  I followed the 10-point checklist on Adobe & everything was done, except for "uncheck Hardware Acceleration" in Flash 'Settings'; I tried to uncheck it on this site, where it's indicated, as well as in my 4 browsers when I'm doing something that uses Flash, but no matter how hard I try, I can't 'uncheck' the check mark in that tiny box!  Since this error problem only affects 5 web sites, & I can watch streaming media on all other sites, I don't think it's an issue. 
    Here's how this problem began:  I was watching a live, streaming nest-cam on 5/09/14 around 11:00AM, (yes, I DO know the exact time & date, because it happened so suddenly while I was watching this website that I'd been watching since the end of February, 2014), when my screen went black.  I thought it was probably an Adobe Crash, but when the usual Crash Report window didn't show up, I just closed Firefox & reopened it, expecting to resume watching the nest-cam.  When I went back to the site, I got the black screen with the "Error loading plugin: Plugin file not found" message.  The chat portion on the site still works, though. I know there are other sites with this nest-cam feed, so I started trying them, but it took several tries for me to find one that didn't get the error message! I posted this problem on "Windows BBS" forum, & someone else posted that the same thing happened to them AND on the same sites!  They didn't have a solution, either.  I cleared my cache, rebooted my PC & even did a System Restore, but whatever happened in that brief second made using ONLY 5 sites impossible.  Here are the sites that receive the error message:
    http://pixcontroller.com/eagles, (but I CAN go to http://pixcontroller.com, but there isn't any streaming media)
    http://cbslocal.com/eagles
    http://westmorelandconservancy.org/BlueBirdwebcam-1.htm
    http://wildearth.tv/cam/pittsburgh-bald-eagles, (I get the error message on ALL cams on this site)
    http://aviary.org/BE-NestCam1 (I get the error message on ALL cams on this site)
    Now if any videos from the 5 websites above are uploaded to YouTube, I can watch them perfectly...no error message if I watch the videos elsewhere.  Luckily, I found Ustream, & they have most of the nest cams I watch, but I need to fix this issue, because it's nearing nesting time!  I'm an amateur nest-watcher & it's vital that I have access to these 5 sites, so if anyone knows how to fix this, PLEASE tell me!
    Thanks for taking the time to read my post.
    All suggestions/solutions are gratefully accepted.
    Thanks in advance for your help!
    DogPal 

    File Not Found Error in Welcome Screen
    07-Nov-2013 10:25
    Tags: #dreamweaver_cs6_update
    Help please!
    Live preview also not working.
    I have exactly the exact problem described below but do not have a folder with the same name as the volume created under the volume. Please can someone help - I've tried everything. This problem only happened when I upgraded to Dreaweaver CC!
    "On launching Dreamweaver on your Macintosh if your Welcome Screen is not loading and if you see a "File not found" error, please check if you have a folder with the same name as your volume created under the volume. For more info on this please go through the attached pdf document. Other dialogs/panels in dreamweaver that will be blank due to this issue are Jquery Swatches panel, Adobe Edge Webfonts tab in Manage Fonts dialog,W3c Error Info dialog, Externalise Javascript dialog and svn revert dialog. After following the changes mentioned in the attached document please check all the affected dialogs/panels to confirm everything is working as expected."
    Thanks,
    Martin Bond
    [personal information removed by moderator]

  • Error loading C:\Users\User Name\AppData\Local\HpWebNotifier\SyncNetOffice.dll

    Everytime I start up my computer I get a pop-up that states:  'Error loading C:\Users\User Name\AppData\Local\HpWebNotifier\SyncNetOffice.dll'
    My computer and printer work fine but this message is annoying.  I can't figure out what the problem is.  I am wondering if it is an issue from an old printer that I used to be connected to that I've already uninstalled.  Does anyone have any ideas how I can resolve this issue?
    Thanks!
    This question was solved.
    View Solution.

    Hello lisabar90,
    What operating system is the computer?
    What model computer are you using?
    Try this click on start and then run and type msconfig and hit enter.
    (if your computer doesn't have a run type msconfig in the search box and click on the application)
    Go to the startup tab and see if you can see a reference to that location. Uncheck it and reboot your computer.
    Post back your results.
    If I have helped you in any way click the Kudos button to say Thanks.
    The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
    - Friendship is magical.

Maybe you are looking for