Error loading...lvdaq.dll initialising dll error

when I tried to put the Ai Acquire waveforms.vi from the NI
measurement/Data acquisition/analog input folder in the
functionspalette to into my blockdiagram
I get the attached error message. When I do it logged in with administrator rights there is no problem, I get my application.
I gave the National Instruments folder all the rights possible, nothing changed.
I don't want to develop daq applications only with administrator rights for the whole system.
My question is which rights do I have do give to simple user on a winxp operating system,
to allow him or her do develop daq applications.
WITH win2000 I do'nt have this problem, but I don't want to change five xp computers to win2000.
queese2
Attachments:
daqdllinifehler.gif ‏21 KB

Hi queese2,
please try this.
Hope it helps
Regards
Indiana

Similar Messages

Error Loading lvdaq.dll

Hello LabView Discussion forum.
I am currently using LabView 2009. My research supervisor has been attempting to open Legacy files from Labview 7.1 on the more modern version, with no success. After doing a little research, I found that I needed to download Traditional DAQ in order to get the newer version of LabView to open the older file. I first downloaded the DAQ for 7.4.1 and installed it with setup.exe, after which I attempted to open the program. I got the "Error loading lvdaq.dll... Initialization failed" error. I then downloaded 7.4.4, thinking perhaps it would be a better version. Same error. I am now downloading version 7.1 (an earlier legacy DAQ), thinking that perhaps the version numbers ought to match up from the origin of the older file to the legacy DAQ I have to run it. Hopefully this will work (and if it does I will simply delete my post), however if it doesn't, I shall update my post, and hopefully get some help figuring out what needs to be done.
I thank you in advance for any assistance rendered.
Solved!
Go to Solution.

I had quite a few "Can't find file" errors, which we fixed by manually browsing through the library files (.llb) and finding the files in question.
Once all of the files were found, I attempted to load the program, and I got a (nidaq.32) error, which we fixed by downloading the legacy version of DAQ.
Once this had been done, I attempted to load the program again, only to get the error consistent with my post title.
The error comes up when I attempt to open the VI, not just when I load LabView.
As you said, it might be that version 9 simply is unable to, but I don't know why that would be the case. Lack of backwards compatibility in a software like this doesn't seem to make very much sense.
I'll check it though. Thank you very much good sir! I'll update the thread if I find that version 9 is indeed not compatible.

Lvdaq.dll error

When I start one of my programs I get the following message:
Error loading "lvdaq.dll"
A dynamic link library (DLL) initialization routine failed.
This is happens repeatadly for a number of paths, such as C:\Program FIles\National Instruments\LabView 7.1\vi.lib\1easyio.lib\AI Sample Channel (single-point waveform).vi
I'm not sure why this is happening. Does anyone have any suggestions?

Hi MBL,
It sounds like your Traditional DAQ drivers might have become corrupted. First
try repairing them by following the steps below:
1.
Go to Control Panel»Add or Remove
Programs»National Instruments Software
2.
Click on Change/Remove
3.
Find Traditional DAQ
4.
Click on Repair
If this does not work then you will
be required to uninstall and re-install your Traditional DAQ driver. You can
get a fresh copy of the latest Traditional DAQ Drivers here. Keep me posted on your results.
Best regards,
Jordan D
Applications Engineering
National Instruments

Essbase Error : Unable to load the dll essapinu.dll.

Hi Guys,
I have imported a essbase cube in the OBIEE. The import went fine, then i made the logical model and presentation layer. Now when i am selecting column from that cube in BI answers, i am getting this error:
*State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. The specified module could not be found. [nQSError: 36001] Unable to load the dll essapinu.dll. (HY000)*
Any idea how to solve this. BTW the installation of essbase server went fine and also this dll is present in the hyperion server directory.
Thanks in Advance

hi,
check this blog...
it refers to essbase...maybe he/she know more...
http://www.rittmanmead.com/2009/07/27/oracle-bi-ee-10-1-3-4-1-essbase-connectivity-repository-design-enabling-drills-on-evaluate-columns-part-1/
Check with google and in others blogs..you may find something useful
hope i helped....
http://greekoraclebi.blogspot.com/
///////////////////////////////////////

Error Message: Resource Not Found, Unable to Load SyncUICoreLocalized.dll

I'm having trouble syncing my iPhone 4. I get an error message that says: Resource Not Found, Unable to load SyncUICoreLocalized.dll. This is preventing me from transferring my information from my old phone to my new iPhone 5c. Can anyone help me??? A simple restart of the computer did not solve the problem.
Thanks :-)

I found a thread of people having the same problem, and a suggestion by stanalet solved my problem! Thanks stanalet!

When trying to upload a document or attach a document in an email Firefox gives me an error "Failed to load CTDFMRES.dll" and stops responding, I have no issues in any other browsers. And I am using Firefox 4, Fixes???

When trying to upload a document or attach a document in an email Firefox gives me an error "Failed to load CTDFMRES.dll" and stops responding, I have no issues in any other browsers. And I am using Firefox 4, Fixes???

You don't have to disable any addons or extentions!!!You guys are not going to believe this I figured out the problem it's really dumb...ok here goes the attachment uploader loads seperate so I got to thinking it's a popup so I went to options content and under block pop ups there is an option exceptions click on that and in the box type firefox.com and hit allow pow its fixed!!!!! :-)

Failed to load WMSchApi.dll. Error 1114 All Operation disabled

We currently have a large number or workstations that have imported fine, we
can view diag info but are unable to use any remote control functionality.
Below is an extract from the zen remote log file which shows a failed load
off wmschapi.dll and a critical error .
Anybody got a fix that can be automated
Thanks
Scott
We're using the ZFD agent from IR4 patch which is working fine on other PCs,
all 49 SP2 clients, W2K SP4.
#(660)# 16:59:50 11/24/04 Normal : Loading : C:\Program
Files\Novell\ZENworks\ZenLite.dll
#(660)# 16:59:50 11/24/04 Normal : Loading : C:\Program
Files\Novell\ZENworks\ZenPol32.dll
#(660)# 16:59:50 11/24/04 Normal : ZENNDSUtil: Successfully loaded
dependent modules...
#(660)# 16:59:50 11/24/04 Normal : LoadZenAutilLibraryAndGetProc:
Successfully loaded ZenAutil.dll and its dependent DLLs
#(660)# 16:59:50 11/24/04 Normal : Console version is SP1
#(660)# 16:59:50 11/24/04 Critical : ZenRmServer: Failed to find
Console Version #0.6.5.1 in supportability list
#(660)# 16:59:50 11/24/04 Warning :
RMAudit::Auditing.cpp:RMSesstionStart() The audit log file is not found.
#(660)# 16:59:50 11/24/04 Normal : ZENUtil:
ZENIsWorkstationRegistered: wsDN 'CN#(660)# 16:59:50 11/24/04 Normal :
Workstation is registered
#(660)# 16:59:50 11/24/04 Normal : ZENNDSUtil: Attempting to read
policies...
#(660)# 16:59:50 11/24/04 Normal : ZENUtil:
ZENIsWorkstationRegistered: wsDN 'CN#(660)# 16:59:50 11/24/04 Normal :
Workstation is registered
#(660)# 16:59:50 11/24/04 Normal : Reading workstation DN and tree
name...
#(660)# 16:59:50 11/24/04 Normal : workstation DN -
CN
#(660)# 16:59:50 11/24/04 Normal : Loading : C:\Program
Files\Novell\ZENworks\WMSchApi.dll
#(660)# 16:59:50 11/24/04 Critical : ZENNDSUtil: Failed to load
WMSchApi.dll. Error: 1114
#(660)# 16:59:50 11/24/04 Normal : Reading workstation DN and tree
name...
#(660)# 16:59:50 11/24/04 Normal : workstation DN -
CN
#(660)# 16:59:50 11/24/04 Normal : Loading : C:\Program
Files\Novell\ZENworks\WMSchApi.dll
#(660)# 16:59:50 11/24/04 Critical : ZENNDSUtil: Failed to load
WMSchApi.dll. Error: 1114
#(660)# 16:59:50 11/24/04 Normal : Neither policy settings active.
All operations disabled.

> We currently have a large number or workstations that have imported fine, we
> can view diag info but are unable to use any remote control functionality.
>
> Below is an extract from the zen remote log file which shows a failed load
> off wmschapi.dll and a critical error .
>
> Anybody got a fix that can be automated
>
> Thanks
>
> Scott
>
> We're using the ZFD agent from IR4 patch which is working fine on other PCs,
> all 49 SP2 clients, W2K SP4.
>
>
> #(660)# 16:59:50 11/24/04 Normal : Loading : C:\Program
> Files\Novell\ZENworks\ZenLite.dll
> #(660)# 16:59:50 11/24/04 Normal : Loading : C:\Program
> Files\Novell\ZENworks\ZenPol32.dll
> #(660)# 16:59:50 11/24/04 Normal : ZENNDSUtil: Successfully loaded
> dependent modules...
> #(660)# 16:59:50 11/24/04 Normal : LoadZenAutilLibraryAndGetProc:
> Successfully loaded ZenAutil.dll and its dependent DLLs
> #(660)# 16:59:50 11/24/04 Normal : Console version is SP1
> #(660)# 16:59:50 11/24/04 Critical : ZenRmServer: Failed to find
> Console Version #0.6.5.1 in supportability list
> #(660)# 16:59:50 11/24/04 Warning :
> RMAudit::Auditing.cpp:RMSesstionStart() The audit log file is not found.
> #(660)# 16:59:50 11/24/04 Normal : ZENUtil:
> ZENIsWorkstationRegistered: wsDN 'CN#(660)# 16:59:50 11/24/04 Normal :
> Workstation is registered
> #(660)# 16:59:50 11/24/04 Normal : ZENNDSUtil: Attempting to read
> policies...
> #(660)# 16:59:50 11/24/04 Normal : ZENUtil:
> ZENIsWorkstationRegistered: wsDN 'CN#(660)# 16:59:50 11/24/04 Normal :
> Workstation is registered
> #(660)# 16:59:50 11/24/04 Normal : Reading workstation DN and tree
> name...
> #(660)# 16:59:50 11/24/04 Normal : workstation DN -
> CN
> #(660)# 16:59:50 11/24/04 Normal : Loading : C:\Program
> Files\Novell\ZENworks\WMSchApi.dll
> #(660)# 16:59:50 11/24/04 Critical : ZENNDSUtil: Failed to load
> WMSchApi.dll. Error: 1114
> #(660)# 16:59:50 11/24/04 Normal : Reading workstation DN and tree
> name...
> #(660)# 16:59:50 11/24/04 Normal : workstation DN -
> CN
> #(660)# 16:59:50 11/24/04 Normal : Loading : C:\Program
> Files\Novell\ZENworks\WMSchApi.dll
> #(660)# 16:59:50 11/24/04 Critical : ZENNDSUtil: Failed to load
> WMSchApi.dll. Error: 1114
> #(660)# 16:59:50 11/24/04 Normal : Neither policy settings active.
> All operations disabled.
>
>
Just to support the previous person who also replied to this question. We
had the same problem and it was the path. Someone pushed an app that
replaced the path instead of appending to it and it killed the zen remote
agent. Replacing the path to "c:\program files\novell\zenworks" path worked.
Thanks much for the person who first suggested this.
Neal...

Acrobat fatal error: failed to load core dll

Hi,
I have a problem with acrobat reader on my laptop.
My OS is Vista Home Premium.
I had Master collection CS4 installed.
When starting up acrobat reader; i got following error:
failed to load core dll.
I went to the log and this is the explenatoin written in there: (i'm dutch speaking)
Kan activeringscontext voor 'C:\Program Files\Adobe\Reader 9.0\Reader\AcroRd32.dll' niet maken. Fout in manifest of beleidsbestand '' op regel . Een onderdeelversie die nodig is voor de toepassing conflicteert met een andere onderdeelversie die reeds actief is. Conflicterende onderdelen zijn: Onderdeel 1: C:\Windows\WinSxS\manifests\x86_microsoft.vc80.crt   _1fc8b3b9a1e18e3b_8.0.50727.42_none_db5f52fb98cb24 ad.manifest. Onderdeel 2: C:\Windows\WinSxS\manifests\x86_microsoft.vc80.crt   _1fc8b3b9a1e18e3b_8.0.50727.762_none_10b2f55f9bffb 8f8.manifest.
Kan activeringscontext voor 'C:\Windows\system32\BHOManager.dll' niet maken. Fout in manifest of beleidsbestand '' op regel . Een onderdeelversie die nodig is voor de toepassing conflicteert met een andere onderdeelversie die reeds actief is. Conflicterende onderdelen zijn: Onderdeel 1: C:\Windows\WinSxS\manifests\x86_microsoft.vc80.crt   _1fc8b3b9a1e18e3b_8.0.50727.42_none_db5f52fb98cb24 ad.manifest. Onderdeel 2: C:\Windows\WinSxS\manifests\x86_microsoft.vc80.crt   _1fc8b3b9a1e18e3b_8.0.50727.762_none_10b2f55f9bffb 8f8.manifest.
I simultaneously had a problem with Dreamweaver.
I think all this is caused by an Side By Side configuration issue.
I've tried to do following steps:
-redistibrutable 2008 c++ package geinstall
-system recoverage tool
-reinstall cs4 master collection
-uninstall master collection, clean up, install reeware acrobat reader
-uninstall acrobat reader, ccleaner register issues resolver , also older than 24 uur , reboot, install acrobat reader freeware
-revo uninstall tool to remove acrobat
none of the above actions were successful.
What could u suggest or give as a solution.
Atm i'm using an altarnative pdf-reader.
But as i bought the master collection,
i'd rather have my adobe acrobat reader pro and dreamweaver working.
Thanks in advance,
With friendly regards
Anton

Hi Anton
I am sorry, I do not have an answer just a similar problem.
I am no expert, but all these manifest files are to ensure that different developers can ensure that the appropriate versions of common libraries are used by particular versions of their software.
Deatils are below. The original problem was a corrupted manifest file, probably due to a disk error. This resulted in several programs failing to run. In particular I was unable to access backup on my Windows Home Server. From the logs I was able to identify the manifest file in error and located a copy of a file with the same name on another of my computers. Using notepad I then changed the file causing the problem to match the file on the other computer.
This appeared to resolve all my problems.
When the Acrobat Reader updated itself, however, the"failed to load core DLL" message appeared. Simply uninstalling all adobe programs and re-installing makes no difference.
If you have the solution please post.
If not, I will continue to research this problem.
Very best wishes
Graham
Details from error log and manifest files:
Acrobat failed to load its core DLL
Log Name:      Application
Source:        SideBySide
Date:          29/10/2010 23:30:07
Event ID:      80
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      9GHASUSP5QSEx64
Description:
Activation context generation failed for "C:\Program Files (x86)\Adobe\Reader 9.0\Reader\AcroRd32.dll".
Error in manifest or policy file "" on line .
A component version required by the application conflicts with another component version already active.
Conflicting components are:.
Component 1: C:\Windows\WinSxS\manifests\x86_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.4927_none_d 08a205e442db5b5.manifest.
Component 2: C:\Windows\WinSxS\manifests\x86_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.762_none_10 b2f55f9bffb8f8.manifest.
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<assembly xmlns="urn:schemas-microsoft-com:asm.v1" manifestVersion="1.0">
    <noInheritable></noInheritable>
    <assemblyIdentity type="win32" name="Microsoft.VC80.CRT" version="8.0.50727.4927" processorArchitecture="x86" publicKeyToken="1fc8b3b9a1e18e3b"></assemblyIdentity>
    <file name="msvcr80.dll" hash="b2cd2205044f7cfd822da03b5f8d329ac5f4fcde" hashalg="SHA1"><asmv2:hash xmlns:asmv2="urn:schemas-microsoft-com:asm.v2" xmlns:dsig="http://www.w3.org/2000/09/xmldsig#"><dsig:Transforms><dsig:Transform Algorithm="urn:schemas-microsoft-com:HashTransforms.Identity"></dsig:Transform></dsig:Tra nsforms><dsig:DigestMethod Algorithm="http://www.w3.org/2000/09/xmldsig#sha1"></dsig:DigestMethod><dsig:DigestValue>niXcYiF5k0Z3fQ7PBFMJuaYHWTU=</dsig:DigestValue></a smv2:hash></file>
    <file name="msvcp80.dll" hash="984100dac2591da1a03c5146fecc47eb5deabec7" hashalg="SHA1"><asmv2:hash xmlns:asmv2="urn:schemas-microsoft-com:asm.v2" xmlns:dsig="http://www.w3.org/2000/09/xmldsig#"><dsig:Transforms><dsig:Transform Algorithm="urn:schemas-microsoft-com:HashTransforms.Identity"></dsig:Transform></dsig:Tra nsforms><dsig:DigestMethod Algorithm="http://www.w3.org/2000/09/xmldsig#sha1"></dsig:DigestMethod><dsig:DigestValue>aW9cDm76mbaI14MUAAx8P0auVdE=</dsig:DigestValue></a smv2:hash></file>
    <file name="msvcm80.dll" hash="34d9d81de781f7566e20e2bd33e410bc80837703" hashalg="SHA1"><asmv2:hash xmlns:asmv2="urn:schemas-microsoft-com:asm.v2" xmlns:dsig="http://www.w3.org/2000/09/xmldsig#"><dsig:Transforms><dsig:Transform Algorithm="urn:schemas-microsoft-com:HashTransforms.Identity"></dsig:Transform></dsig:Tra nsforms><dsig:DigestMethod Algorithm="http://www.w3.org/2000/09/xmldsig#sha1"></dsig:DigestMethod><dsig:DigestValue>pyazDrJIgYvW/Y3vCJt/9hpimHA=</dsig:DigestValue></a smv2:hash></file>
</assembly>
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<assembly xmlns="urn:schemas-microsoft-com:asm.v1" manifestVersion="1.0">
    <noInheritable></noInheritable>
    <assemblyIdentity type="win32" name="Microsoft.VC80.CRT" version="8.0.50727.762" processorArchitecture="x86" publicKeyToken="1fc8b3b9a1e18e3b"></assemblyIdentity>
    <file name="msvcr80.dll" hash="10f4cb2831f1e9288a73387a8734a8b604e5beaa" hashalg="SHA1"><asmv2:hash xmlns:asmv2="urn:schemas-microsoft-com:asm.v2" xmlns:dsig="http://www.w3.org/2000/09/xmldsig#"><dsig:Transforms><dsig:Transform Algorithm="urn:schemas-microsoft-com:HashTransforms.Identity"></dsig:Transform></dsig:Tra nsforms><dsig:DigestMethod Algorithm="http://www.w3.org/2000/09/xmldsig#sha1"></dsig:DigestMethod><dsig:DigestValue>n9On8FItNsK/DmT8UQxu6jYDtWQ=</dsig:DigestValue></a smv2:hash></file>
    <file name="msvcp80.dll" hash="b2082dfd3009365c5b287448dcb3b4e2158a6d26" hashalg="SHA1"><asmv2:hash xmlns:asmv2="urn:schemas-microsoft-com:asm.v2" xmlns:dsig="http://www.w3.org/2000/09/xmldsig#"><dsig:Transforms><dsig:Transform Algorithm="urn:schemas-microsoft-com:HashTransforms.Identity"></dsig:Transform></dsig:Tra nsforms><dsig:DigestMethod Algorithm="http://www.w3.org/2000/09/xmldsig#sha1"></dsig:DigestMethod><dsig:DigestValue>0KJ/VTwP4OUHx98HlIW2AdW1kuY=</dsig:DigestValue></a smv2:hash></file>
    <file name="msvcm80.dll" hash="542490d0fcf8615c46d0ca487033ccaeb3941f0b" hashalg="SHA1"><asmv2:hash xmlns:asmv2="urn:schemas-microsoft-com:asm.v2" xmlns:dsig="http://www.w3.org/2000/09/xmldsig#"><dsig:Transforms><dsig:Transform Algorithm="urn:schemas-microsoft-com:HashTransforms.Identity"></dsig:Transform></dsig:Tra nsforms><dsig:DigestMethod Algorithm="http://www.w3.org/2000/09/xmldsig#sha1"></dsig:DigestMethod><dsig:DigestValue>YJuB+9Os2oxW4mY+2oC/r8lICZE=</dsig:DigestValue></a smv2:hash></file>
</assembly>

Error 1 - C:\programfiles\....\lvdaq.dll - Invalid apth

My application works with the Multifunction DAQ. The source works great with no problems. However, when i move on to building an executable, i get the following error:
Error 1 occured a C:\ Program Files\National Instruments\LabVIEW 6.1\vi.lib\DAQ\lvdaq.dll - Invalid path.
Possible reasons:
LabVIEW: An input parameter is invalid
or NI-488: Command requires GPIB controller to be controller in charge.
I have tried checking the permissions on the dll file, verified the path and also ensured that all the 'Call library Function Nodes' are using the right dll. I removed the dll file from its location and the builder complained that it could not find the file. This verified that the builder is able to see the file. But i am not sure why it claims the path to be invalid. Kindly help.
Thanks

Pls discard the above post. For some reason, i double posted without being aware.

Error Opening After Effects CS3 - cannot load AERes1.dll

Hello,
When I try to open After effects I get this Error "cannot load AERes1.DLL"
I tried to reinstall after effects and it didnt dfix the problem.
I uninstalled the entire Master collection CS3 and reinstalled and the problem didnt solve.
I could open After Effects in the past.
Any suggestions?

OK so this is how I solved the problem if anyone encounter it ever again...
Uninstalling and reinstalling the CS3 won't help.
The problem happens probably because of quicktime installed prior to the CS3 updates. I didnt try to remove quicktime. I formatted my PC and luckly I had an image of my c: drive from the time I installed the cs3 and prior to the time I installed Quicktime. So I made all Adobe Cs3 updates first and only than installed Quicktime.
Now After Effects works.
If anyone finds a way to solve this without formatting c: drive, let me know.
Ariel E.

Error loading 'ModelCom.dll': Missing export 'GetModuleHandleW' from 'KERNEL32

Hallo zusammen,
wir Arbeiten hier mit LV-RT (8.5) und ProveTech TA, von der Firma MBtech.
Die Frima MBtech liefert dazu eine dll dür den Datenaustausch zwischen beiden Systemen.
Seit dem Update der dll auf eine neuere Version bekommen wir immer folgende Fehlermeldung:
Error loading 'ModelCom.dll': Missing export 'GetModuleHandleW' from 'KERNEL32.DLL'
Meine Anfrage bei MBtech hat folgendes ergeben, vielleicht können sie mir diesbezüglich weiter helfen?
Besten Dank schonmal im voraus!
Anfrage:
beim Update von ProveTech auf die Version 2009SE wurde auch eine neue ModelCom.DLL zur Verfügung gestellt. Diese verursacht jedoch immer einen Absturz des LabView-Realtime Betriebssystems.
Fehlermeldung:
Error loading 'ModelCom.dll': Missing export 'GetModuleHandleW' from 'KERNEL32.DLL'
Wurden in der neuen ModelCom.DLL vielleicht neue Funktionen programmiert,
die auf (von LabView-Realtime) nicht unterstützte Windows-API-Funktion zugreifen?
MBTech:
Die Untersuchung der Abhängigkeit zu GetModuleHandleW hat ergeben, dass
diese Abhängigkeit seit der Verwendung des Visual C++ 2008 Compilers existiert (statt Visual C++ 2005).
Zu welchen Visual C++ Compiler-Versionen ist LabVIEW-RT kompatibel?
Bald kommt der Release von Visual C++ 2010.

Hallo Manuel.W,
bitte entschuldigen Sie, dass es etwas länger gedauert hat.
Grundsätzlich unterstützen wir LabVIEW und LabWindows/CVI als Entwicklungsplattform für unsere Real-Time-Systeme.
Für andere Entwicklungsumgebungen können wir aus verständlichen Gründen keinen Support leisten.
Windows-DLLs, welche mit anderen Entwicklungsumgebungen (als die beiden oben genannten) erstellt wurden, können auf Pharlap-basierten Real-Time-Systemen lauffähig sein, müssen es allerdings nicht.
Das folgende Utility liefert einen ersten Ansatzpunkt, indem es die Funktionsaufrufe (Calls) der DLL testet.
How Can I Verify that My DLL is Executable in LabVIEW Real-Time?
http://digital.ni.com/public.nsf/allkb/0BF52E6FAC0BF9C286256EDB00015230
Ansonsten können vielleicht noch folgende Hinweise helfen:
Can LabVIEW Real-Time Interface With External Code?
http://digital.ni.com/public.nsf/allkb/2EA49B05E67DDECF86256F9A006FB315?OpenDocument
Are there any tips or guidlines when creating DLLs for a Destop RT target (using Visual Studio C++)
http://forums.ni.com/ni/board/message?board.id=170&message.id=423544&requireLogin=False
Can I Use a Free Compiler with Simulation Interface Toolkit (SIT)?
http://digital.ni.com/public.nsf/allkb/AAD15283A1F051A1862574F000744DBD?OpenDocument
CVI RT Missing Export Error when using a DLL from VS2008
http://forums.ni.com/ni/board/message?board.id=180&message.id=41001&requireLogin=False
Dann hoffe ich, dass diese Informationen hilfreich waren.
Mit freundlichen Grüßen
i. A. Ralf N.
Application Engineering,
GERMANY

Error loading 'ole32.dll': Missing export '_resetstkoflw' from 'MSVCRT.DLL'

I'm getting the RT error:
Error loading 'ole32.dll': Missing export '_resetstkoflw' from 'MSVCRT.DLL'
LabVIEW RT 2011
I've reinstalled RT several times but am still seeing the error.
I only see it after closing my application.
I've attached a report of my RT system.
Any ideas on what I might be missing?
Robert C. Mortensen
Certified LabVIEW Architect
Certified LabVIEW Embedded Systems Developer
Endigit
Attachments:
ni_support.zip ‏1110 KB

Hello Robert,
I wasn't able to find too much about this error on our end, but doing a wider search it seems errors involving MSVCRT.DLL usually take place when this Microsoft C Runtime Library file is replaced by a third-party file that lacks "_resetstkoflwfunction". It's odd that the error occurs only after closing the application. Here is a third-party website I was able to find which explains this in a bit more detail, and might be a fix to try if your are comfortable: How to Fix Common Msvcrt.dll Errors?
Regards,
Deborah Y.
LabVIEW Real-Time Product Marketing Manager
Certified LabVIEW Architect
National Instruments

Error 17004. Trying to load a dll on remote machine

Hi,
I am trying to control a network simulator using a dll that is in a remote PC.
I run into this error 17004
I gave in C/C++ Module Path: \\<PC Name>\C\MX847010\Remote Library\RmtSvcLib.dll (this is accessible from the PC with test stand)
I also added \\<PC Name>\C\MX847010 in Search Directories
Has anyone faced this before?
Module for Step 'Open MNS' not Loadable. Could not load DLL or external library '\<PC Name>\C\MX847010\Remote Library\RmtSvcLib.dll'.
This DLL requires the following DLLs which could not be found or loaded:
MFC70.DLL (Not Found)
MSVCR70.dll (Not Found)
MSVCP70.dll (Not Found)
File        :
C:\Users\user\Desktop\Anritsu_testStandproto\MNS_500_IRAT_HO.seq
Location    :
Seq["MainSequence"].Main["Open MNS"].TS.SData
Rule        :
Code modules must be able to load
Description :
TestStand must be able to load all code modules without error. TestStand reports errors at run time when it
fails to load a code module. Correct this problem by editing the step in the sequence editor.

It sounds like you are missing the dependencies that the DLL requires. You need to have them installed on your computer.

"unable to load wingenerator.dll" error message in Captivate 4

Has anyone run into the "unable to load wingenerator.dll" error message in Captivate 4. I didn't see this type of error in v3...so just wondering if it is an issue with this version. I have to save my project after every change in order to not loose my work. I get this error and then the program crashes without saving my work.

Hello Cat,
Welcome to our community. This sounds like the Windows registry has either become corrupt or has an incorrect permission. If you are using Windows XP then you might want to take a look at the following blog post
Adobe Captivate 4 Installation Issues on Microsoft XP
If you are using Windows Vista then I would suggest that you contact Adobe using the Adobe Captivate Feature Request/Bug Report Form
Adobe Captivate Feature Request/Bug Report Form
Regards - Mark

T420i - Power Manager - Error occurred while Loading resource DLL

Hi Team,
I am facing an issue here, wherein, when I try to start the application : Lenove Power Manager, i get the following error msg:
"An error occurred while loading resource DLL". I am not sure how to get this working. Can someone please help me out with this.
Regards,
Surya

Welcome to Lenovo Community! Surya
1. Uninstall existing Power Manager.
2. Download the new Power Manager from the link below and install:
http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS014924
Have a nice day!
Peter
W520 (4284-A99)
Does someone’s post help you? Give them kudos as a reward, as they will do better to improve | Mark it as solved if the solution works for you, so it could be reference for others in the future
=====================================
Sound Enthusiast and Enhancement (Post comments, share mixes, etc.)
Dolby Home Theater v4 ; IdeaPad Slate Tablet

Download error cannot load the DLL (pdh dll)

I've tried and tried several times to download Skype but half way through the down load I get the following error message: cannot load the DLL (pdh.dll)

Try to run System File Checker tool (sfc /scannow): http://support.microsoft.com/kb/929833

Error loading...lvdaq.dll initialising dll error

Similar Messages

Maybe you are looking for