Error loading Master Data ARFCSTATE = SYSFAIL.

Hi All,
When I am trying to load master data 1 data package is not getting loaded, from R/3 the job is getting completed but in BW it is still in Yellow when I checked the job log in R/3 where in that it is showing ARFCSTATE = SYSFAIL.
It shows that from R/3 itself data package has problem.
Can anyone help me in solving this issue.
Regards
Bhanu

Hi,
I will suggest you to check a few places where you can see the status
1) sysfail in SM37 generally means that packet was not send to BW side. But this may not be true in all cases. Rarely We have come acroos situations where you can see sysfail for a particular package in R/3 but will find that packet updated into PSA. Chek this in RSMO > Details.
In case you dont find that packet in BW PSA. Try this.
Go to R/3 > SM37 > goto datacpacket with sysfail. Adjacent to that sysfail message you will a TID no.
Copy that and got to SM58 and search for that in the tRFC pending. There will be one with the same TID or Transact ID. Execute it. The Packet may get transfered to BW.
If it doesnt happen you may have to retrigger the load.
Else Once you identify you can rectify the error.
If all the records are in PSA you can pull it from the PSA to target. Else you may have to pull it again from source infoprovider.
Thanks,
JituK

Similar Messages

Error loading master data RSDMD114

Attempting to load master data - several objects fail with message:
RSDMD114, "The Master Data is deleted in the background"
I went as far as to delete all of the old data and start again.
The object was reactivated.
No locks found on the lock tables.
Still getting the error.
Anyone seen this before ?
THANKS

<b>The problem has been solved.</b>
The data deletion job failed - so the control table was still set to show that the deletion run was in progress.
Table <b>RSDCHABASDEL, Status Logging for Master Data Deletion.</b>
Delete the entry from this table, look for the name of the object in question.
Everything ran OK with the entry cleared from the table.

BPC75NW: Error Loading Master data for BPC Dimensions from BW InfoObject

Hello Gurus,
I'm trying to load master data for BPC Dimensions from BW Infoobjects.
The ID thats used in BW is 32 char long. When I run the load, the ID is truncated after 20 chars and the records are reported as duplicates.
Due to this the load is failing.
I cannot use any other ID as the texts will not be loaded in that case.
Is there any work around to handle this?
I cannot load the transaction data either.
I looked at some posts and blogs in sdn, but nothing really helped.
Cube - 0RPM_c05 (Financial Planning cube in SAP PPM)
Version: BPC 7.5 NW SP5
Thanks,
Vasu

Thanks Everyone.
" you can write a transformation file and give a new name to those IDs who have values more than 20 characters."
Poonam - Could you explain more?
I tried using a additional Dimension property to hold the 32 char ID. But I cannot access this in the transformation.
Is there a way to refer the dimension property in the Transformation file or in the UJD_ROUTINE BADI implementation?
Thanks,
Vasu

Error loading master data

One of the master data variable(0customer), is unable to load data.
rsmo has status red but data is loaded with errors is the message
The error message is as follows..
Error records written to application log
error 4 in the update.
i have planned to delete the request number, but i could not find
the same for the master data variable.
Plz suggest
Regards

Hi,
the error message is basically
@5C@ 08/07/2007 03:06:18 Value 'PRODUÇÃO D ' for characteristic 0SORTL contains invalid characters RRSV 7
i have checked in RSKC and executed the same, and reloaded the data
but still the load is red color, with records 5167 from 5167 in rsmo for
the master data variable
Rgs

Error loading master data 0project_attr

Hi all,
I get an error when i load the master data 0project_attr. The overall status is red, but it shows all records are being transferred( 71 from 71 records). I'm using transfer rules. The error is shown is " Error 4 in the update "
Please help.
Regards,
Jayanthi.

if you are using ALPHA conversion for infoobject either remove ALPHA or remove the spaces.
Also check the settings at RSKC and check if RSKC_ALL_CAPITAL is maintained or not.
what was the detailed error ??
Edited by: Bilvanth C on Sep 11, 2009 11:08 AM

Error loading master data text

Hi all,
When I does a data load from PSA for master data text,
error appears whcih shows "0OI_PBLTYP : Data record 3 ('INFO') : Language key is initial".
Please tell me why this error.
Hint:I have 17 records in PSA for 11 location types.
11 in English and 6 in German.
Thanks ,
Chintu.

Hi Chintu,
Since you have made the info-object as "language-dependent" the system is looking for lang-key in the data. You can either enter the lang-key in the pSA directly. But if the source system is R/3 my suggestion would be that you pick up the lang-key for the datasource. This would ensure that you dont have to edit the PSA each time you load.
Bye
Dinesh

Error loading master data attr and text for 0material

Hi gurus,
I am new to BI, I am getting an error RSDMD- 194 when i am loading 0MATERIAL_ATTR and TEXT.
It is showing for nearly 100 records in the error stack.
Can anyone explain some basics,
1) why do we need to add 0MATERIAL to a particular Info area to start loading its ATTR and TEXT
2) Are the info objects that appear in the attributes tab of 0MATERIAL the same as the fields of 0MATERIAL_ATTR datasource, basically what i don't understand is are we mapping the 0MATERIAL_ATTR datsource fields to the info objects appearing in the attributes tab of 0MATERIAL info object.
3) Also when i added 0MATERIAL to my Info Area , there were some extra info objects that got in, are there any dependent objects that get added ?
<removed by moderator>
Edited by: Siegfried Szameitat on May 19, 2009 11:53 AM

Hi,
"Error RSDMD- 194 when i am loading 0MATERIAL_ATTR and TEXT.RSDMD- 194"
Please check if there is any external characterstic in those 100 records, correct it and load again.
1) why do we need to add 0MATERIAL to a particular Info area to start loading its ATTR and TEXT
It does,t matter where the 0Material is. Info area in kind of Folder to easily locate and put the all the related objects at one place.
2) Are the info objects that appear in the attributes tab of 0MATERIAL the same as the fields of 0MATERIAL_ATTR datasource, basically what i don't understand is are we mapping the 0MATERIAL_ATTR datsource fields to the info objects appearing in the attributes tab of 0MATERIAL info object.
If it is a business content infosource, it will automatically map the attribute to data source field. If you are modifying or creating your own object, you should map it manually based on field name and description.
3) Also when i added 0MATERIAL to my Info Area , there were some extra info objects that got in, are there any dependent objects that get added ?
If you will move any objects all the compounded objects will also come to the info area.
Regards,
Kams

Error while loading master data to attribute ZMAJORGU(Major organisational unit)

Hi Experts,
While loading master data to ZMAJORGU(MOU)(info object texts) from datasource (ZOS_HRP1000)datasource iam getting error in DTP.
below is the error...
Diagnosis
    Data record 349 & with the key 'Ship &' is invalid in value 'Ship &' of
    the attribute/characteristic ZMAJORGU &.
System Response
    The system has recognized that the value mentioned above is invalid, and
    has processed this general error message. A subsequent message may give
    you more information on the error. This message refers to the same
    value, even though it does not state this explicitly.
Procedure
    If this message appears during a data load, maintain the attribute in
    the PSA maintenance screens. If this message appears in the master data
    maintenance screens, leave the transaction and call it again. This
    allows you to maintain your master data.
Please find the below screen shots
I have done the following regarding the issue ....Looking at the error i have gone trough the transformation and i didnt find any routines or formuales
I have checked the PSA and down loaded the data to spread sheet and put a filter on SHORT and STEXT assuming i will find the value
'Ship &' as mentioned in the Diagnosis description. However i was not able to find the relavent data(i went to se16 gave teh request ID from PSA and displayed the entire data)tarting with Ship .The closest value i could find in both the fileds was was AVP Shipment .
I have the following questions
1)In the screen short 2 it says record number 349 is it right to go to PSA table and check against the record number 349(i tried that but i was not able to find the error against that record)
2)why am i not finding the value 'Ship' in PSA ...but this is the value wich is creating a poblem in updating to the target ....does it mean the record value is Ship or it starts with Ship or is ir part of some word?
Please find the attached PSA data file (u have to convert it to Excel)
I request people to help me analyse the issue and fix the issue.
Regards
Kiran

Ram
I checked other records as well they were a lot of smallcharecters upper case charectres ,numeric special charecters .but nothing stopped ...when the system is even accpeting all other charectres like smallof caps or numeric... why on this record is creating an issue...
please have a look at error stack
and i have one more question when i look at PSA there are close to 300000 records
but when i do an SE16 with request id i see only close to one lakh records (i came to conclusion b dragging down and the last record number was (below screen shot)
Can you tell me what my mistake is numebr or records are not tallying in SE16 and PSA..

Lock NOT set for: Loading master data attributes error

Hi experts,
We were encountering this error before when trying to load master data. When we checked the system we could not find any locks at the time, and activation or kicking off the attribute change run failed again. We finally solved the problem running FM RSDDS_AGGR_MOD_CLOSE which sets the close flag to 'X' in table RSDDAGGRMODSTATE. I have read that it is possible this lock error happens when two change runs happen at the same time.
My question are:
1. is it possible to find out what process exactly "caused" the lock? the table RSDDAGGRMODSTATE does not have a reference to any object or job. I am curious as we are trying to find ways to avoid this in the future...
2. in our case, when we could not find any locks, is running this fm the only work around? is this a best practice?
mark
Message was edited by:
Mark Siongco
Message was edited by:
Mark Siongco

Hello Catherine
I have had this problem in the past (3.0B) --> the reason is that our system was too slow and could not crunch the data fast enough, therefore packets where loacking each other.
The fix: load the data into the PSA only, and then send it in background from the PSA to the info object. By doing this, only a background process will run, therefore locks cannot happen.
Fix#2: by a faster server (by faster, I mean more CPU power)
Now, maybe you have another issue with NW2004s, this was only my 2 cents quick thought
Good luck!
Ioan

Error while loading Master Data - BPC 10.0 NW

Hello gurus,
I am trying to load master data from a BW InfoObject to a dimension in BPC, but am getting the error as shown below:
The transformation and conversion files are configured as shown below:
I would greatly appreciate if you can help me troubleshoot the issue with the java script command. Thanks in advance for your help.
Best regards,
Vijay

Hello Vijay,
Which Patch are you using for EPM add in.
It seems that js:%external%.replace("#","_") does not work with some patches
so in that case you have to use js:%external%.toString().replace("#","_") in your conversion file.
Deepesh

Error while loading master data.

I am facing error while loading master data in a infoobject.
The error comes when I run DTP fo rloading data from PSA to infoobject.
The error wordings are : "MCK_PRDT1 : Data record 1 ('Bleach '): Version 'Bleach ' is not valid"
Please help me in understanding this Version errror and suggest a solution for this.

SAP metodology integration MDM & BW you can look at:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b0f1f135-0015-2b10-5e83-acca118e17aa
You can turn matching strategy in MDM Data manager for delete dublicate of records
and then use MDM Syndicator for export data to file and then load that file to BW
If you use OHD you cannot load from BW to MDM repository 10 records and unload only 5 because
in BW every record has unique key.
also you can use MDM ABAP or Java API for delete dublicate of records
Edited by: Kanstantsin Chernichenka on May 8, 2009 1:02 PM

Error 194 while loading Master Data.

Hi,
I've a custom Info Object which has 0MATERIAL as an attribute. While trying to load master data to this custom info object using DBConnect , I'm getting the error:
RSDMD 194
0MATERIAL: Data record 1('0001003') : Version '1009841' is not valid.
I think it's a problem with conversion exit. But I'm not able to solve this problem. It would be of great help if you could guide me on how to overcome this.
Thanks in advance.
Regards
Hari

Hari,
I'm thinking for DB Connected datasources we have Propose Tab Page and Fileds Tab Page. In the Propose tab Page you can see data type and Format(internal or External or check). select external, put data type of your Material Infoobject Data type in the Propose Tab Page.
all the best.
Note: I'm thinking DB Connected Datasources got Propose Tab page. Please correct me if i'm wrong.
Regards,
Nagesh Ganisetti.
*Assign Points if it helps

BI 7.0 - Duplicate Record Error while loading master data

I am working on BI 7.0 and I am trying to load master data to an info object.
I created an Infopackage and loaded into PSA.
I created transformation and DTP and I get an error after I execute the DTP about duplicate records.
I have read all previous threads about duplicate record error while loading master data and most of the them suggested to check 'Ignore duplicate records' option in the infopackage. But in 7.0, I can only load to PSA with infopackage and it doesn't have any option for me to ignore duplicate records.
My data is getting loaded to PSA fine and I get this error while loading to info object using DTP.
I would appreciate your help to resolve this issue.
Regards,
Ram.

Hi,
Refer:
http://help.sap.com/saphelp_nw2004s/helpdata/en/45/2a8430131e03c3e10000000a1553f6/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/d0/538f3b294a7f2de10000000a11402f/frameset.htm
With rgds,
Anil Kumar Sharma .P

Error while loading master data from R/3

Hi Friends,
            I'm just trying to load master data for the infoobject of type "0BUS_AREA", but i have got data into PSA, but not got into char, i have got an error stating that
Record 1 :No source system ID exists for source system (logical system) RD1CLNT100
In tran structure there are two objects not being populated 0LOGSYS & OSOURCESYSTEM, which might cause the problem.
Pls waiting for your replays
Thanx in advance
Balaji K.

Hi Aswin,
           Thanx for your replay, in that one column is there, "source system id" but it is empty, how to generate that two digit source system id and also there are three kind of tabs like
"Release IDs that are in use" "Suggest Source System IDs" & "Maintain Logical Systems"
         How to use and which one to use, and how to follow step by step to run loads once again by populating "OLOGSYS" & "OSOURCESYSTEM" ?
Pls clarify this problem
Regards.,
Balaji K.

36 duplicate record found. -- error while loading master data

Hello BW Experts,
Error while loading master data
( green light )Update PSA ( 50000 Records posted ) No errors
( green light )Transfer rules ( 50000 ³ 50000 Records ): No errors
( green light )Update rules ( 50000 ³ 50000 Records ): No errors
( green light ) Update ( 0 new / 50000 changed ): No errors
( red light )Processing end: errors occurred
     Processing 2 finished
Þ     36 duplicate record found. 15718 recordings used in table /BIC/PZMATNUM
Þ     36 duplicate record found. 15718 recordings used in table /BIC/XZMATNUM
This error repeats with all the data-packets.
what could be the reason of the error. how to correct the error.
Any suggestions appreciated.
Thanks,
BWer

BWer,
We have exactly the same issue when loading the infoobject 0PM_ORDER, the datasource is 0PM_ORDER_ATTR.
The workaround we have been using is 'Manual push' from the details tab of the monitor. Weirdly we don't have this issue in our test and dev systems, even in Production, this doesn't occur somedays. We have all the necessary settings enabled in the infopackage.
Did you figure out a solution for your issue, if so please let me know and likewise I will.
-Venkat

Error loading Master Data ARFCSTATE = SYSFAIL.

Similar Messages

Maybe you are looking for