Error loading module, VERIFY ERROR

dear sir,
my bb 8520 is showing app error 523 reset.
how to solve this issue please help.
my phone is also not connecting through
USB to my laptop.
thanks & regards
kamal preet
india

Hi and Welcome to the Community!
Here is a KB that discusses that error:
Article ID: KB24395 "Error 523", "App Error 523", or "JVM 523" appears on the BlackBerry smartphone
Hopefully it contains something useful! There also are multiple existing threads on this site that discuss that exact error...your review of those might prove useful, and a search of this site, using the error message, error code, or symptom, should reveal all applicable existing threads to you.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

Error starting "app name": Error loading module "appname" Verify error

I've downloaded 3 application on my device 9800.
at last i've download one app from Blackberry App World.
When i open that application, Its throws error.
"Error starting "app name": Error loading module "appname" Verify error."
I'm unble to open it. I've deleted and re install the app. Nothing has been help. I've tried to download others app. Its downloaded. But not open. the same problem has thrown.
What is the problem. how to open it. Now, if i download new apps, its throws the same error, " *"Error starting "app name": Error loading module "appname" Verify error.""*
Pls give a solution.

Hi sgm_friends
Have you tried a Battery Pull Restart ? As you are constantly getting that error and unable to open any Apps that you download then to rule out any Software issue please reload your device Software ,but do a complete Backup of your device before that :
KB11320 : How to perform a clean reload of the BlackBerry Device software using BlackBerry desktop software for windows.
I hope it will help.
Prince
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

Error starting APP: Error loading module 'APP' Verify Error

My blackberry 9800 is no longer working with apps .. It appears that all newly installed apps or upgraded apps (purchased or free) now give a 'verify error' on startup. I have re-installed the apps and even re-installed the OS to no avail.
Online forums show many others with this issue but the only advice is upgrade to OS 7 which is not an option for the 9800 I own (a bit over a year old) some suggestion the app registry is full but no idea how to fix this...
This is extremely frustrating that the primary apps I use on my phone are no longer functional and there seems to be no way to get support or help on this issue beyond a vague suggestion that I buy a new device.
Can anyone help?
Blackberry 9800
Rogers wireless
OS 6.0 bundle 2647

I was able to fix my phone with the help of Blackberry support.
1. update the desktop software
2. back up data from phone
3. download the newest version of OS6 to the computer
4. close desktop software then run the OS6 .exe
5. open desktop software plug in phone to computer and pull the battery.
6. choose the option to install local (downloaded OS6) version
7. note that the 'recommended' option is not the local option -both work but the local option is faster.
8. replace the battery quickly as soon as you see the installation progress bars.
9. after installation is complete, remove from computer and navigate the browser to app world and download it
10. open app world and update BBM software
11. download any 'app' that was not working before and enjoy (in my case 'wikitude' 'tumblr' 'ubersocial' 'foursquare' 'wordpress' 'twee tcaster' and 'BellTV')
lastly, go back to the desktop software and get your data back
Took about an hour+ 112mb downloaded for desktop software and 189mb downloaded for OS6...all this so I could use the wikitude app (it was worth it)
Blackberry Bold 9780
Bell Canada
Blackberry's number is 877-255-2377 but if you call your carrier and have them transfer you; you wont have to pay for your Blackberry ticket/case #
Bell Canada was helpful and RIM was helpful

Standard report throws the error - 'LOAD FAILED, INTERNAL ERROR'

Hi there,
When i run lead origin report or any other standard report, the error says 'LOAD FAILED, INTERNAL ERROR' as mentioned in screen shot. The same i checked in QA server too and error analysis says ''define the correct currency default is EURO''
All the standard reports has the same problem.
* these reports are running in UI.

Hi Himanshu,
Where is the detailed error screenshot in SAP GUI.
Thanks,
Faisal PC

Boot Camp "Error loading operating system" error

When I try to boot into Windows XP via boot camp I get "Error loading operating system"
The partition still works fine with VMWare.
Any suggestions?

Just an idea for you. There is an entire Apple Discussion forum dedicated to Boot Camp and Windows.
Whereas, not everyone here with an Intel iMac has installed, tried to install or has experience with BC & Windows, everyone there has or at least has an interest. You may attract help more quickly there.
The Forums are at the bottom of the main Apple Discussions page under Windows Compatible Technology. Here is a link;
Boot Camp: Installation and Storage

DRM Error: 3305[ServerConnectionFailed] and Error loading metadata file:Error #2048

I am using the sample player in Adobe Access 4_0 SDK to play the encrypted video on FMS 5.0.
1) When trying to play the " http://.../vod/WorldCup.mp4" file and get the error "DRM Error: 3305[ServerConnectionFailed] Load http://.../vod/WorldCup.mp4 "
2) switch TVP mode. try to "Load DRM Metadata" and get the log " Error loading metadata file: Get URL:http://.../vod/WorldCup.mp4.metadata:Error #2048"

I am using the sample player in Adobe Access 4_0 SDK to play the encrypted video on FMS 5.0.
1) When trying to play the " http://.../vod/WorldCup.mp4" file and get the error "DRM Error: 3305[ServerConnectionFailed] Load http://.../vod/WorldCup.mp4 "
2) switch TVP mode. try to "Load DRM Metadata" and get the log " Error loading metadata file: Get URL:http://.../vod/WorldCup.mp4.metadata:Error #2048"

In my blackberry phone whatsapp showing module verify error. Plese help me

Bbm is installed but it is not showingf in menu

Rumors? lol, you were putting stock in a rumor about Verizon? Shame on you!
Sprint has officially released OS6 for the 9330, just load it. No big deal.
There is really nothing to worry about.
Please read more information on that here:
http://www.port3101.org/power-users/296-blackberry-os-upgrade-including-betas-myths-dispelled.html
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

OAS 9.0.4 display error: java.lang.verify.error

Hi,
I have an adf application, in jdevelper 10.1.2 and jheadstart 10.1.2...in oc4j embedded run correctly, but its deployed in:
oas 10g 9.0.4 display the following error:
java.lang.VerifyError: (class: oracle/adf/controller/lifecycle/PageLifecycle, method: initializeParameterValuesUsingRequestObject signature: (Loracle/adf/controller/lifecycle/LifecycleContext;Loracle/jbo/uicli/binding/JUCtrlActionBinding;)V) Incompatible object argument for funcÃf8?Ã?Ã®<ul8?Ã?Ã®<
     at oracle.jheadstart.controller.strutsadf.action.JhsStrutsPageLifecycleFactory.getJSPLifeCycle(JhsStrutsPageLifecycleFactory.java:83)
     at oracle.jheadstart.controller.strutsadf.action.JSPLifecycleFactory.getPageLifecycle(JSPLifecycleFactory.java:40)
     at oracle.adf.controller.struts.actions.DataActionMapping.freeze(DataActionMapping.java:212)
     at org.apache.struts.config.impl.ModuleConfigImpl.freeze(ModuleConfigImpl.java:503)
     at org.apache.struts.action.ActionServlet.init(ActionServlet.java:474)
     at javax.servlet.GenericServlet.init(GenericServlet.java:258)
     at oracle.jheadstart.controller.strutsadf.JhsActionServlet.init(JhsActionServlet.java:195)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.1.0)].server.http.HttpApplication.loadServlet(HttpApplication.java:2130)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.1.0)].server.http.HttpApplication.findServlet(HttpApplication.java:4560)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.1.0)].server.http.HttpApplication.getRequestDispatcher(HttpApplication.java:2598)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.1.0)].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:643)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.1.0)].server.http.AJPRequestHandler.run(AJPRequestHandler.java:208)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.1.0)].server.http.AJPRequestHandler.run(AJPRequestHandler.java:125)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.1.0)].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
     at java.lang.Thread.run(Thread.java:534)
I configure mi app according to:
http://www.oracle.com/technology/products/jdev/collateral/papers/10g/as_supportmatrix.html
help me please...
Rigoberto

Rigoberto,
Can you apply the steps as documented by Steve Muench at
http://radio.weblogs.com/0118231/stories/2005/05/20/stepsToDeployJheadstartTutorialApplication.html
and see whether the problem persists?
Steven Davelaar,
JHeadstart Team.

How to fix 2008 MacBook error: load code signature error 4 for file "airportd"?

Macbook doesn't boot, error came up when trying to boot with safe boot with status. I have never had or used Airport Express. I tried rebooting plugged in directly to router and same error occurred. Any suggestions?
(Also receiving disk0s2 i o error in safe boot status)

Yosemite is not supported for Encore, but neither was Mavericks (even though it is on the list, I don't think it is truly "supported," and there were issues).
Many of the issues in Mavericks and Yosemite appeared to be permissions. Most Adobe apps need read/write access, and those were not the defaults for the OS.
Some Mavericks users reported the following fixes their problems - I eventually assumed that somewhere in the process, it was fixing permissions. But perhaps it does more:
http://forums.adobe.com/message/6109315#6109315
And comments for these operating systems for Premiere Pro, Adobe Media Encoder, and After Effects may be helpful. (Encore does not have a support team that is active, so nothing official for it.) But there are specific bug fixes for these OSs in CC versions, so....
Monahan re Premiere permissions
http://blogs.adobe.com/kevinmonahan/2014/09/10/premiere-pro-cc-freezing-on-startup-or-cras hing-while-working-mac-os-x-10-9-and-later/
Kopriva re permissions and AE primarily:
http://blogs.adobe.com/aftereffects/2014/06/permissions-mac-os-start-adobe-applications.ht ml
Re the Photoshop -1 issue:
http://forums.adobe.com/message/5950080#5950080
The workaround was not to left-click on the menu. Use right click, or other options and menu commands.
http://forums.adobe.com/message/5810884#5810884
See post 12 and several following where we are looking for workarounds to the error.

"Error loading operating system" in windows 7 bootcamp

Hello, Im trying to boot up my windows 7 and its giving me "Error loading operating system". But the wierd thing is from Mac OS X i can access my bootcamp without any problem "browsing it", all my music is on it actually. Any solutions guys?

Hi guys,
Sorry to resurrect an old thread, but I am suddenly having a very similar problem and maybe one of you can help me. I have searched the problem using many different phrases but have not found a solution to my specific issue anywhere so I turned here.
Problem : I am getting the "Error Loading Operating System" error on the windows side after trying to boot up using BootCamp.
More Info / History : Everything was running fine until I updated OSX to 10.10.02. I have an unsupported card with no EFI : GTX 980 so I couldn't tell what was going on with the update but it just hung in black screen for a while and then when into an infinite restart-loop. Sooooo, I pulled the card and put my old GTX 120 with EFI back in to see what the **** was going on and miraculously it decided to finish the update. (Maybe it had something to do with the unsupported card? IDK) The update finished successfully after i swapped out the cards but I fear i screwed up something by restarting during the update (I was hung up, I waited a very long time before hitting the power button). OSX is running ok, I put the other card back in and it is working ok now, but... BootCamp was working... once. Then I restarted and it wouldn't work, I got the error message. So I tried doing a verify/repair disk on both drives, OSX and W7, and that didn't do anything, so I tried to start BootCamp assistant and I couldn't... So I reset the PRAM and that fixed the problem with BootCamp Assistant, so now that starts up, but I don't know if I can repair the issue with it? However I still can't boot into Windows. Again, when I hold down option on boot, I do get the menu (BootCamp?) to choose which OS to go into. Side Note, when I pick Recovery Mode from that menu, I get the mac error message and it restarts.
All the W7 Files are still present on the drive... Is there any way I can back up the image, re-prep the drive for BootCamp and re-image it to repair it? All thoughts, suggestions, etc. welcome.
Hardware:
• Upgraded 2009 Hex-Core Mac Pro flashed to 2010
• OWC PCIE SSD - OSX 10.2.2 installed here
• nVidia GTX 980 - EVGA
• 1TB HDD - 1 Partition - Windows 7 installed here (Bootcamp)

Stuck on start up: error loading kernel 0x6 code... fix?

My Macbook Pro is suddenly not starting up or taking ages to start up (managed to get it on and posting this)
Sometimes stuck on the apple logo, or it might flash a stop icon for a brief moment.
I loaded verbose up and i got a error loading kernel 0x6 error code.
_I cannot secure empty trash, or just never stops emptying, this is usually the reason for me to re-start.
_Some apps are now just crashing straight away and never stay open.
_I've recently installed a new ssd and put snow leopard on it etc..
Anything i can do or is it just a re-install os job?

Done a disk verify once i got it open..
2010-11-18 14:21:06 +0000: Checking catalog file.
2010-11-18 14:21:07 +0000: Incorrect block count for file CACHE_003
2010-11-18 14:21:07 +0000: (It should be 39 instead of 43)
2010-11-18 14:21:07 +0000: Checking multi-linked files.
2010-11-18 14:21:07 +0000: Checking catalog hierarchy.
2010-11-18 14:21:07 +0000: Checking extended attributes file.
2010-11-18 14:21:07 +0000: Invalid node structure
2010-11-18 14:21:07 +0000: The volume Macintosh HD could not be verified completely.
Then did one using the start up disk but it could not be completed.
I fear a fresh install is needed

Error loading with firefox and sometimes IE

Hi experts,
I published about 250 AW 7 learning objects and got a
frustrating feedback of my students. Most of them are using firefox
and got a red bar with "error loading" without more information.
Other students got errors like missing file or wrong length of
xtras. The same learning objects are running under IE without
problems.
Last year I worked with AW65 and had only a few problems with
my studends.
I used the default settings for publishing (I changed only
the window style to"onTop").
Here is an example "
http://www.rw-interaktiv.de/aufgliederung_eigenkapitals/aufgliederung_eigenkapitals.htm"
(its in German).
Can anybody help? The students should use the learning
objects for the examination.
Thank you very much and greetings from Austria.
Uwe

Some versions of Firefox will not display the security dialog
- I don't know
why. If your students can make sure that your site is a
trusted site (or the
whole domain as you have) then it should work without any
problems.
Unfortunately without something being trusted in the first
place your
program can't make that setting. They'd have to locate the
file and edit it
by hand. You could have them load the application one time in
IE. Have them
set the domain to trusted when the security dialog appears.
From then on
they could use Firefox becuase the trust setting will be
there. This should
at least rule out the security dialog being the issue.
HTH,
Mike
====================
Mike Baker
Adobe Community Expert
[email protected]
"Paul Swanson" <[email protected]> wrote in
message
news:f6e34m$882$[email protected]..
> Actually, I don't remember seeing the security dialog
when I first
launched
> it yesterday. I didn't get it today, and my AWSHKWV.INI
file (dated today)
> has only:
>
> # Security settings:
> VERSION 2
> Security = TrustOnlyListed
> WarnNonTrusted = ON
> WarnTrusted = OFF
> TrustedSite =
http://*.harlandds.*
>
> So I believe Uwe may have disabled the security dialog.
Still, I didn't
get
> any errors, even after renaming my XTRAS folder. I have
the 2004 Web
Player,
> so maybe that has something to do with it.
>
> - Paul
>
>
> "Mark Tomlinson" <[email protected]> wrote in
message
> news:f6dvhg$3ri$[email protected]..
> > gutu1 wrote:
> > > Thank you for your quick answer. My students
told me, they installed
the
> plugin
> > > manually. Some got only a red bar with "error
loading", some got
errors
> like
> > > "file missing or wrong length" for files of
the xtras. But all xtras
are
> on the
> > > server.
> > > I told my students to use IE, but many
students do not want to use
> IE...
> > >
> > > best regrads
> > > Uwe
> > >
> >
> > So do they see the security dialog generated by
Authorware when using
> > FireFox ???
>
>

Verify Error 1030# Stack Depth unbalanced 1 != 0.

Hi,
Iam trying to inject some code into the SWF File using an
opensource Java Framework. My code is getting injected correctly. I
saw this, when i tried to decompile the SWF file into which i
injected the code. But there is something that needs to be handled
when it comes to handling the instruction sets available inside the
method where i injected the code. I just wanted to know what that 1
and 0 points to, in the below given error message.
Verify Error 1030# Stack Depth unbalanced 1 != 0.
If somebody can help me out in making me understand the 1 and
0 in the error message, i can further proceed to correct the
mistake that i have done.
Thanks,
Prabakaran Srinivasan.

Hi All,
I am able to find the root cause for this. For AS 3 classes,
while parsing the ABC code, every method body will be a set of
instructions in which each instruction will have an offset to it.
This offset will be useful to mark the target for branching
instructions like if, while etc.... Because, these instructions
contains targetoffset as a parameter to which the instruction has
to jump when the condition becomes true or false. The process what
i am doing is i do some code injection to replace the URLRequest
calls. The flash file in which i got this error, i did replace the
URLRequest call to my own method call and this code was being
wrapped up by an IF block. Because of the code injection, i need to
update the offset of the instructions with the difference offset
value. I did this, but i missed the jumpoffset parameter of the if
block wrapping my injected code which was the root cause. I did fix
this...
Thanks,
Prabakaran Srinivasan.

Errors when using Spark Buttons in dynamically loaded modules loaded by dynamically loaded modules

Ok ... I have to admit this issue is rather special ;-)
I have a flex application that loads a list of modules after the user logs in, depending on the permissions of the user.
One of these modules contains a component, that allows the user to configure settings for different types of objects.
For each object type (can be extended) there exists one module swf.
The strange problem I am having now is that as soon as a Spark Button (or anything derived from one ... CheckBox) inside the settings-module. I get the following error (unfortunately in german ... but I'll try to translate).
This error happens when using a spark CheckBox (Which is derived from Spark Button):
ArgumentError: Error #2004: Einer der Parameter ist ungültig.
at flash.display::Graphics/drawRect()
at mx.graphics::RectangularDropShadow/drawShadow()[E:\dev\4.x\frameworks\projects\framework\ src\mx\graphics\RectangularDropShadow.as:575]
at mx.skins.spark::BorderSkin/updateDisplayList()[E:\dev\4.x\frameworks\projects\sparkskins\ src\mx\skins\spark\BorderSkin.mxml:174]
at mx.core::UIComponent/validateDisplayList()[E:\dev\4.x\frameworks\projects\framework\src\m x\core\UIComponent.as:8709]
at mx.managers::LayoutManager/validateDisplayList()[E:\dev\4.x\frameworks\projects\framework \src\mx\managers\LayoutManager.as:663]
at mx.managers::LayoutManager/doPhasedInstantiation()[E:\dev\4.x\frameworks\projects\framewo rk\src\mx\managers\LayoutManager.as:718]
at mx.managers::LayoutManager/doPhasedInstantiationCallback()[E:\dev\4.x\frameworks\projects \framework\src\mx\managers\LayoutManager.as:1072]
When having a look at the problem the cause is that width and height are not set (NaN).
If I use a plain Button I get the same error in "drawRoundRect".
As soon as I change back to a mx-Button/Checkbox, everything is fine.
In my current Case I wanted to use a custom TreeItemRenderer to display a CheckBox in the tree. This tree Item renderer is included in a custom Lib that is used by all modules.
I have one Second Level module using this renderer. I have one Third Level Module thas uses the exact same tree definition. If I use the MX CheckBox I get CheckBoxes in the Second- and Third-Level Module. If I use the Spark-CheckBox I get a CheckBox in my Second Level Module and the above Error in the Third Level Module.
To make everything even stranger: I have a custom component loading my modules and I use this in the Top Level Module to load the Second Level Modules and in my Second Level Module to load my Third Level Modules (So I would guess If my loader is broken, then the Second Level Modules should not work either).
Help is greatly appreciated :-)
Regards,
Chris

Ok, I managed to find out what was going wrong and to get my stuff working again. I have to admit that I have no idea why my application / flex was showing this behaviour. The only way I could track this down was by undoing the Subversion checkins one by one. Finding out what was happening using common sense seems to be out of the question with this issue.
My application is built up of a main application swf that loads module swfs and a library swc that contains common stuff and is used in the main application and the modules.
I now had some custom TreeItemRenderers in my modules. The problem was caused by moving a custom TreeItemRenderer from one module to the library-swc. I could successfully reproduce this. If I add only one class extending TreeItemRenderer to my library (I don't even have to use it), the entire flex system goes haywire. As soon as I remove that class, everything is ok. I checked, if there might be a problem with third party libs containing flex core classes which might be used instead of the sdk ones, but after looking at the catalogs of the third party swcs I couldn't find a reference to TreeItemRenderer.
Any Ideas? I sort of dislike the idea of being able to run into such strange problems. Is there a tool that allows me to check for class compatibility issues?

Error loading snd modules

ok so this is my first install, and everything went fairly smoothly. i just can't figure out why i am getting these errors on boot up:
snd-cs4232 and snd-wavefront can't load module. When I am not calling them in the rc.conf or modprobe.conf.
my modprobe.conf:
# /etc/modprobe.conf (for v2.6 kernels)
# OSS Compatibility
alias eth0 nvnet
# --- BEGIN: Generated by ALSACONF, do not edit. ---
# --- ALSACONF verion 1.0.8 ---
options snd device_mode=0666
alias snd-card-0 snd-intel8x0
alias sound-slot-0 snd-intel8x0
# --- END: Generated by ALSACONF, do not edit. ---
and my rc.conf
# /etc/rc.conf - Main Configuration for Arch Linux
# Localization
# HARDWARECLOCK: set to "UTC" or "localtime"
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: fount in /usr/share/kbd/consolefonts (only needed for non-us)
# USECOLOR: use ANSI color sequences in startup messages
HARDWARECLOCK="localtime"
TIMEZONE=Canada/Pacific
KEYMAP=us
CONSOLEFONT=
USECOLOR="yes"
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# Networking
HOSTNAME="Archbox"
# Module to load at boot-up (in this order)
# (prefix a module with a ! to disable it)
MODULES=(!usbserial !ide-scsi snd-intel8x0 nvidia)
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# (prefix an interface in INTERFACES with a ! to disable it)
# Note: to use DHCP, set your interface to be "dhcp" (eth0="dhcp")
lo="lo 127.0.0.1"
eth0="dhcp"
INTERFACES=(lo eth0)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# (prefix a route in ROUTES with a ! to disable it)
gateway="default gw 192.168.0.1"
ROUTES=(!gateway)
# Daemons to start at boot-up (in this order)
# (prefix a daemon with a ! to disable it)
DAEMONS=(syslog-ng hotplug !pcmcia network netfs crond gdm)
# End of file
If i can get the sound working that is it...then i can play around and see if this is the distro i've been looking for. Any help would be much appriciated.

rdking wrote:If i disable hotplug, i'll have to load my usb mouse and keyboard modules in rc.conf right?
No - there is no keyboard module and no mouse module either... the only module you'd need is for general usb support (ehci_hcd, ohci_hcd, uhci_hcd)
rdking wrote:And is it necessary to add a GDM in rc.conf if you set the init default to 5?
They're different ways to get to the same result... doing it through init 5 and executing it in the daemons array gives you the same results... it's only slightly different...

Error loading module, VERIFY ERROR

Similar Messages

Maybe you are looking for