Error loading OS/400 PASE program R3trans

Hi,
we recently update kernel patch 133 for ECD 6.0 on iSeries/DB4
we also upgrade tp and r3trans patch.
but r3trans is not working it's gives error Error loading OS/400 PASE program R3trans
how to solve this problem?
regards,
ajay

Hi,
which version of R3trans you used?
check Note 1137680 - i5/OS: 700 tools no longer function after applying a patch
regards,
kaushal

Similar Messages

Tecra M7: Can't create Recovery CD: Missing CDDVD.ini - Error loading INI file: RDC_info.ini

I just recently purchased a Tecra M7, but the system does not come with recovery media, just a Recovery partition and a Recovery Disk creator.
However, when I try to run the Recovery Disc Creator, it replies with "Error loading INI file: C:\Program Files\Sonic\RecordNow!\RDC_info.ini".
I opened this file to try to determine the error, but the contents simply refer to a file named CDDVD.ini. I have looked all over the Hard Drive, even mounted the Recovery Partition, but could not find this file.
Searching on Google, I found that this file regularly goes missing, and that without it, the recovery media cannot be created. One person reported Tech Support emailing him the file, another was emailed by another user.
In both cases, the user was immediately able to make the disks. In any case, it seems to be a standard file, referring to "Add_info.ini" (Application and Drivers Disks) and "Rec_info.ini" (OS Recovery Disk), fairly consistent and unchanging through all systems that use this method to build disks.
Please, could someone email me theirs or post it here so we can all see?
If/when I receive this file, once I determine it works I will post it here.
Daniel

I have talked to Tech Support, and the Tecra M7 w/ XP Tablet Edition does not have Recovery Disks available yet. I was told to check back in a couple of weeks.

I receive the error: Unable to load block component C:\Program Files\Hyperception\VABINF\KeyRcv.dll

I have two Major issues with our Infinity Project computers,
We have one entire lab that is getting this error... "Unable to load
block component C:\Program Files\Hyperception\VABINF\KeyRcv.dll.
Please verify that the component exists and any dependencies it may
have are satisfied." It is also producing this error with
NumEntry.dll. Both files exist. I am not sure what
dependencies these files may have. Ideas?
We have several systems that are giving the following error on one of
our labs... "You have exceeded the number of block functions allowed by
VAB for Infinity; contact Hyperception regarding upgrades." From
what The professor here at UTA told me when I first took on this
project, this was a problem that we had on the previous boards and that
someone at Hyperception was able to help us resolve this problem.
Can you help out with these issues? The first one I need an answer today if possible.
Thanks,

We have seen this type of problem on some computers (we do not know why as of yet).The problem with missing blocks is very likely being caused by file permissions, and can be seen when non-administrators are using VAB software. To resolve this: 1. login as ADMINISTRATOR 2. run the command line script from a DOS prompt as shown below: cacls "C:\Program FIles\Hyperception\VABINF" /T /E /G Everyone:F It will scroll through the name of every file in the provided directory, and all subdirectories. This should reset every file, and allow the USER to access all files in VAB software. This should correct the problem. Regards,Steve

11.5.10.2 to R12.1.1 upgrade: Error loading seed data for GL_DEFAS_ACCESS_SETS: DEFINITION_ACCESS_SET = SUPER_USER_DEFAS, ORA-06508: PL/SQL: could not find program unit being called

Hello,
EBS version : 11.5.10.2
DB version : 11.2.0.3
OS version : AIX 6.1
As a part of 11.5.10.2 to R12.1.1 upgrade, while applying merged 12.1.1 upgrade driver(u6678700.drv), we got below error :
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ATTENTION: All workers either have failed or are waiting:
           FAILED: file glsupdas.ldt on worker 3.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
drix10:/fmstop/r12apps/apps/apps_st/appl/admin/FMSTEST/log>tail -20 adwork003.log
Restarting job that failed and was fixed.
Time when worker restarted job: Wed Aug 07 2013 10:36:14
Loading data using FNDLOAD function.
FNDLOAD APPS/***** 0 Y UPLOAD @SQLGL:patch/115/import/glnlsdas.lct @SQLGL:patch/115/import/US/glsupdas.ldt -
Connecting to APPS......Connected successfully.
Calling FNDLOAD function.
Returned from FNDLOAD function.
Log file: /fmstop/r12apps/apps/apps_st/appl/admin/FMSTEST/log/US_glsupdas_ldt.log
Error calling FNDLOAD function.
Time when worker failed: Wed Aug 07 2013 10:36:14
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
drix10:/fmstop/r12apps/apps/apps_st/appl/admin/FMSTEST/log>tail -20 US_glsupdas_ldt.log
Current system time is Wed Aug 7 10:36:14 2013
Uploading from the data file /fmstop/r12apps/apps/apps_st/appl/gl/12.0.0/patch/115/import/US/glsupdas.ldt
Altering database NLS_LANGUAGE environment to AMERICAN
Dumping from LCT/LDT files (/fmstop/r12apps/apps/apps_st/appl/gl/12.0.0/patch/115/import/glnlsdas.lct(120.0), /fmstop/r12apps/apps/apps_st/appl/gl/12.0.0/patch/115/import/US/glsupdas.ldt) to staging tables
Dumping LCT file /fmstop/r12apps/apps/apps_st/appl/gl/12.0.0/patch/115/import/glnlsdas.lct(120.0) into FND_SEED_STAGE_CONFIG
Dumping LDT file /fmstop/r12apps/apps/apps_st/appl/gl/12.0.0/patch/115/import/US/glsupdas.ldt into FND_SEED_STAGE_ENTITY
Dumped the batch (GL_DEFAS_ACCESS_SETS SUPER_USER_DEFAS , GL_DEFAS_ACCESS_SETS SUPER_USER_DEFAS ) into FND_SEED_STAGE_ENTITY
Uploading from staging tables
Error loading seed data for GL_DEFAS_ACCESS_SETS: DEFINITION_ACCESS_SET = SUPER_USER_DEFAS, ORA-06508: PL/SQL: could not find program unit being called
Concurrent request completed
Current system time is Wed Aug 7 10:36:14 2013
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

Below is info about file versions and INVALID packages related to GL.
PACKAGE BODY GL_DEFAS_ACCESS_SETS_PKG is invalid with error component 'GL_DEFAS_DBNAME_S' must be declared.
I can see GL_DEFAS_DBNAME_S is a VALID sequence accessible by apps user with or without specifying GL as owner.
SQL> select text from dba_source where name in ('GL_DEFAS_ACCESS_DETAILS_PKG','GL_DEFAS_ACCESS_SETS_PKG') and line=2;
TEXT
/* $Header: glistdds.pls 120.4 2005/05/05 01:23:16 kvora ship $ */
/* $Header: glistddb.pls 120.16 2006/04/10 21:28:48 cma ship $ */
/* $Header: glistdas.pls 120.4 2005/05/05 01:23:02 kvora ship $ */
/* $Header: glistdab.pls 120.5 2006/03/13 19:56:21 cma ship $ */
SQL> select * from all_objects where object_name in ('GL_DEFAS_ACCESS_DETAILS_PKG','GL_DEFAS_ACCESS_SETS_PKG')
2 ; OWNER OBJECT_NAME SUBOBJECT_NAM OBJECT_ID DATA_OBJECT_ID OBJECT_TYPE CREATED LAST_DDL_TIME TIMESTAMP STATUS T G S NAMESPACE
EDITION_NAME
APPS GL_DEFAS_ACCESS_DETAILS_PKG 1118545 PACKAGE 05-AUG-13 05-AUG-13 2013-08-05:18:54:51 VALID N N N 1
APPS GL_DEFAS_ACCESS_SETS_PKG 1118548 PACKAGE 05-AUG-13 06-AUG-13 2013-08-05:18:54:51 VALID N N N 1
APPS GL_DEFAS_ACCESS_SETS_PKG 1128507 PACKAGE BODY 05-AUG-13 06-AUG-13 2013-08-06:12:56:50 INVALID N N N 2
APPS GL_DEFAS_ACCESS_DETAILS_PKG 1128508 PACKAGE BODY 05-AUG-13 05-AUG-13 2013-08-05:19:43:51 VALID N N N 2
SQL> select * from all_objects where object_name='GL_DEFAS_DBNAME_S'; OWNER OBJECT_NAME SUBOBJECT_NAM OBJECT_ID DATA_OBJECT_ID OBJECT_TYPE CREATED LAST_DDL_TIME TIMESTAMP STATUS T G S NAMESPACE
EDITION_NAME
GL GL_DEFAS_DBNAME_S 1087285 SEQUENCE 05-AUG-13 05-AUG-13 2013-08-05:17:34:43 VALIDN N N 1
APPS GL_DEFAS_DBNAME_S 1087299 SYNONYM 05-AUG-13 05-AUG-13 2013-08-05:17:34:43 VALIDN N N 1
SQL> conn apps/apps
Connected.
SQL> SELECT OWNER, OBJECT_NAME, OBJECT_TYPE, STATUS
FROM DBA_OBJECTS
WHERE OBJECT_NAME = 'GL_DEFAS_ACCESS_SETS_PKG'; 2 3 OWNER OBJECT_NAME OBJECT_TYPE STATUS
APPS GL_DEFAS_ACCESS_SETS_PKG PACKAGE VALID
APPS GL_DEFAS_ACCESS_SETS_PKG PACKAGE BODY INVALID SQL> ALTER PACKAGE GL_DEFAS_ACCESS_SETS_PKG COMPILE; Warning: Package altered with compilation errors. SQL> show error
No errors.
SQL> ALTER PACKAGE GL_DEFAS_ACCESS_SETS_PKG COMPILE BODY; Warning: Package Body altered with compilation errors. SQL> show error
Errors for PACKAGE BODY GL_DEFAS_ACCESS_SETS_PKG: LINE/COL ERROR
39/17 PLS-00302: component 'GL_DEFAS_DBNAME_S' must be declared
drix10:/fmstop/r12apps/apps/apps_st/appl/gl/12.0.0/patch/115/odf>cat $GL_TOP/patch/115/sql/glistdab.pls|grep -n GL_DEFAS_DBNAME_S
68: SELECT GL.GL_DEFAS_DBNAME_S.NEXTVAL
81: fnd_message.set_token('SEQUENCE', 'GL_DEFAS_DBNAME_S');
SQL> show user
USER is "APPS"
SQL> SELECT GL.GL_DEFAS_DBNAME_S.NEXTVAL
FROM dual; 2                         -- with GL.
NEXTVAL
1002
SQL> SELECT GL_DEFAS_DBNAME_S.NEXTVAL from dual;               --without GL. or using synonym.
NEXTVAL
1003
drix10:/fmstop/r12apps/apps/apps_st/appl/gl/12.0.0/patch/115/odf>strings -a $GL_TOP/patch/115/sql/glistdab.pls|grep '$Header'
REM | $Header: glistdab.pls 120.5 2006/03/13 19:56:21 cma ship $ |
/* $Header: glistdab.pls 120.5 2006/03/13 19:56:21 cma ship $ */
drix10:/fmstop/r12apps/apps/apps_st/appl/gl/12.0.0/patch/115/odf>strings -a $GL_TOP/patch/115/sql/glistdas.pls |grep '$Header'
REM | $Header: glistdas.pls 120.4 2005/05/05 01:23:02 kvora ship $ |
/* $Header: glistdas.pls 120.4 2005/05/05 01:23:02 kvora ship $ */

Create_dynamic_table - error "Load program not found"

Hi experts,
i have receive error "Load program not found" at CALL METHOD cl_alv_table_create=>create_dynamic_table
Runtime Error LOAD_PROGRAM_NOT_FOUND
Exception CX_SY_PROGRAM_NOT_FOUND
Error analysis
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_PROGRAM_NOT_FOUND', was
neither
caught nor passed along using a RAISING clause, in the procedure
"FB_TABLE_CREATE_STRING" "(FORM)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
On account of a branch in the program
(CALL FUNCTION/DIALOG, external PERFORM, SUBMIT)
or a transaction call, another ABAP/4 program
is to be loaded, namely " ".
However, program " " does not exist in the library.
I'm stuck in this annoying problem,,,can anyone help me?

Hi Maroz,
I know this is not best practise to post my question in some others, but i have posted it separately earlier
Dynamic ITAB from Excel
I have created a dynamic ITAB from 1 Row of Excel Sheet
LOOP AT ist_excel INTO w_excel WHERE row = 2. " Contains the Values provided in 2nd row of Excel
 APPEND w_excel TO row1.
ENDLOOP.
LOOP AT ist_excel INTO w_excel WHERE row = 3. " Contains the Values provided in 3rd row of Excel
 APPEND w_excel TO row2.
ENDLOOP.
LOOP AT ist_excel INTO w_excel WHERE row = 4." Contains the Values provided in 4th row of Excel Etc
 APPEND w_excel TO row3.
ENDLOOP.
LOOP AT row1 INTO w_excel.
 CLEAR wa_it_fldcat.
 wa_it_fldcat-fieldname = w_excel-value .
 wa_it_fldcat-datatype = 'C'.
 wa_it_fldcat-inttype = wa_details-type_kind.
 wa_it_fldcat-intlen = 40.
* wa_it_fldcat-decimals = wa_details-decimals.
 APPEND wa_it_fldcat TO it_fldcat .
ENDLOOP.
* Create dynamic internal table and assign to FS
CALL METHOD cl_alv_table_create=>create_dynamic_table
 EXPORTING
 it_fieldcatalog = it_fldcat
 IMPORTING
 ep_table = new_table.
ASSIGN new_table->* TO <dyn_table>.
* Create dynamic work area and assign to FS
CREATE DATA new_line LIKE LINE OF <dyn_table>.
ASSIGN new_line->* TO <dyn_wa>.
I followed the Link provided by to create a Dynamic ITAB
Please guide me how to pass these Value from excel to Dynamic Internal Table
Warm Regards
Ramchander

All website went "Not Found HTTP Error 404. The requested resource is not found." and the "Firefox cannot load websites but other programs can" page is not help

''dupe of https://support.mozilla.org/en-US/questions/928117''
all website went "Not Found HTTP Error 404. The requested resource is not found." and the "Firefox cannot load websites but other programs can" page is not helping in any ways

A possible cause is security software (firewall,anti-virus) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
*http://kb.mozillazine.org/Error_loading_websites
You can try to reset (power off/on) the router.

I keep getting this message: error loading C:\program~1\common~1\system\Sysmenu.dll

I keep getting this message: error loading C:\program~1\common~1\system\Sysmenu.dll. How do I fix this and what does it mean

Hi,
Perhaps these will help:
http://answers.microsoft.com/en-us/windows/forum/windows8_1-performance/systemsysmenudll-the-specified-module-could-not-be/809f79e3-db5e-455b-aebb-4c0f66a8babc
https://social.technet.microsoft.com/Forums/windows/en-US/bb01892e-497b-4e2a-a2cf-8b8b480f18bf/cprogra1common1systemsysmenudll?forum=w7itprogeneral
If not, I suggest posting your question over here (Participate -> Ask a Question):
Windows Forum on Microsoft Answers
Good luck.
Don't retire TechNet! -
(Don't give up yet - 13,225+ strong and growing)

Error loading control. a newer version needed. the default settings will be used

Hi I am using LabVIEW DSC 7.1 for programming my application. My VI contains NI hypertrend which I am publishing on a browser using the web publishing tool. When I open the web browser on a different computer I get this error- Component works Error loading Control. A newer version needed. The default settings for the control will be used. I have disabled firewall, pop up blocker etc...but for some reason it keeps giving me the same error. I read the knowledge base and it talks something about the .OCX file. I am not sure what I am supposed to do..I also have the DSC runtime installed in my machine. I'd appreciate it if someone could help me with this.

If you're on a 64-bit OS, OCX files must be in the folder: %windir% \ SysWOW64
and not in %windir% \ System32 (only for 32 bits OS)
>> %windir% is the environment variable that defines the Windows folder! (eg: C:\Windows)
French version:
Si tu es sur un OS en 64 bits, les fichiers .ocx doivent se trouver dans le dossier : %windir%\SysWOW64\
et non pas dans %windir%\System32
>> %windir% étant bien sur la variable d'environnement qui défini le dossier de Windows ! (par ex: C:\Windows)

Error message when starting Adobe Illustrator CC [Error loading plugins AppBarControls.aip]

Hello,
I get the following error message when I start Adobe Illustrator CC.
Error loading plugins
AppBarControls.aip
Then it gives me the option to continue by clicking okay. When it opens, the Application Bar is just blank.
I've tried uninstalling, then ran Adobe CC Cleaner, then downloaded and reinstalled.
Computer details : OS X 10.9.5, 1.3 GHz Intel Core i5, 8 GB 1600 MHz DDR3
Help is kindly appreciated!

I also have had a difficult time with Adobe Illustrator CC 2014 crashing upon launch. The support staff was great even though we had to work through several sessions. Below is the email explaining our final session.
This email is in regards with the issue you had been facing with Illustrator CC 2014.
While going through the installer logs, we found that there was an issue with the installation & the program installer had been denied access to several critical files & folders during installation.
This was the main reason for Illustrator crash as several critical components had not been installed properly.
We tried installing the program in a new user account & that worked.
Though the program has been installed properly now & is working in your old account, I will still strongly recommend you to get your computer user account repaired with a Windows 7 operating system diskette.
This is required so that you do not run into more trouble later while working with the Adobe Applications or even while installing other programs.
Avanish Divya was the final support person that successfully resolved my problems.

"Error loading media. File Could not be played" when trying to view streaming media on only some sites. How to fix?

Hi!
I've been having a problem trying to view streaming media, but it only happens on some sites. It's similar to a problem I have on my Windows PC, that's related to Adobe Flash, but since I'm very new to using my iPad Mini, I don't even know if Apple devices have Flash...do they?
Anyway, when I go to a site that's plagued by this issue, I tap the 'Play' arrow on my screen & the circle spins like it's gonna play, but then the screen turns black & this error message appears:
"Error loading media. File Could not be played" followed by a triangle with an exclamation point !
I read several articles online & the solutions ran from updating firmware in their router, (mine is brand new...installed last Thursday), to disabling ad-block programs in their browsers...(I don't have any enabled), and the last one was making changes to the DNS...(I know it means 'domain name server', but I don't have the foggiest idea how to make changes to it!
Anyway, that's my problem. I hope that someone out there knows what I can do to fix it!
Thanks in advance for your help.
K-9Pal

I would assume an issue with the HTML5 media player.
If those aren't working on Windows then it is possible that the proper codecs aren't installed.
You can try to disable the HTML5 media player and make Firefox use the Flash plugin.
You can do this by setting these two prefs to false on the about:config page:
*media.windows-media-foundation.enabled
*media.directshow.enabled
See also:
Windows Media Feature Pack for Windows 7 N and for Windows 7 KN:
*http://support.microsoft.com/kb/968211 - www.microsoft.com/en-us/download/details.aspx?id=16546

CRM 7.0 upgrade ( i5/OS PASE program not found or in use)

Hi,
We are upgrading CRM 5.0 to CRM 7.0 on iSeries (V6r1) and facing the following issue.
When I execute this command
   STARTUP    SID(CD3) TYPE(ABAP) RESTART(YES) DVDPATH('/Inst_DVDs/51036889')
        SAPUPLIB(SAPUP) OPTIONS('jce_policy_zip=/Inst_DVDs/51036889/local_policy.jar')
iSeries show this error message in "UPG_A_CD3" job log.
   Message . . . . :   i5/OS PASE program not found or in use. Path name is
       /usr/sap/CD3/upg/STARTUP.
Does anyone has any idea what could be wrong ?
Thank you,
Jack.

Hi,
We are upgrading CRM 5.0 to CRM 7.0 on iSeries (V6r1) and facing the following issue.
When I execute this command
   STARTUP    SID(CD3) TYPE(ABAP) RESTART(YES) DVDPATH('/Inst_DVDs/51036889')
        SAPUPLIB(SAPUP) OPTIONS('jce_policy_zip=/Inst_DVDs/51036889/local_policy.jar')
iSeries show this error message in "UPG_A_CD3" job log.
   Message . . . . :   i5/OS PASE program not found or in use. Path name is
       /usr/sap/CD3/upg/STARTUP.
Does anyone has any idea what could be wrong ?
Thank you,
Jack.

In AOL email, checking individual messages in the regular system results in this error message: There was an error loading the message. Please try again later.

In accessing AOL email through the full version, I can navigate within my account (old mail, new mail, spam, etc.) fine, but when I try to open an individual email, I get this error message: "There was an error loading the message. Please try again later."
This is identical to a problem someone else was describing in another thread....unfortunately, nothing you suggested to him seemed to be working. I WAS tricked into opening a file attached to an email immediately before this started, so I think its a virus or something. ANYWAY....I AM able to open the messages when I use AOL's basic version. Initially, the problem seemed only to be in Firefox, but I've tried with Internet Explorer now also, and its the same thing, and the basic version is accessible while the full version is still blocked.
On both browsers, following the error message, I can't even click on the individual messages to TRY to open a different one, and there are some not-quite-right boxes and x's and things that appear on the screen that don't belong.
PLEASE tell me you can't make this go away....I've already tried uninstalling and reinstalling Firefox....that didn't work. I've also fun McAffee, and that didn't change anything.

You can do a malware check with several malware scanning programs on the Windows computer. 
Please scan with all programs because each program detects different malware. 
All these programs have free versions.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware: http://www.malwarebytes.org/mbam.php
*AdwCleaner: http://www.bleepingcomputer.com/download/adwcleaner/ http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
*SuperAntispyware: http://www.superantispyware.com/
*Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender: http://windows.microsoft.com/en-us/windows/using-defender
*Spybot Search & Destroy: http://www.safer-networking.org/en/index.html
*Kasperky Free Security Scan: http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*Anti-rootkit utility TDSSKiller: http://support.kaspersky.com/5350?el=88446
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

Error loading plugins. AISaveForWeb.aip

The problem with my computer set to Adobe Illustrator CS5.
20/10/1910 after injection of regular updates adobovskih Illustrator crash when started
starts at the registration window. Since I still trial version, then all these
days to choose it and the program loaded and worked fine. After it was decided
reinstall the trial version, downloaded from the official. site, today it
delivered. Now the program opens, but when you open a message is
Error loading plugins. AISaveForWeb.aip DxfDwg.aip PNGFileFormat.aip
and takes off after the first save (Ctrl S).
Sorry for my English

First Quit Illustrator CS 5
then
C:\Users\Max\AppData\roaming\Adobe\Adobe Illustrator CS5 Settings trash the whole folder
then you have to find the Adobe Illustrator plist files I do not know where they are located on the Windows platform
or if they are called something different or even exist.
If that does not work and you cannot find the plist or equivalent then use the uninstaller and remove Illustrator trash the settings folder
clear out any cache files associated with CS 5, the cache files are usually located in a directory called Application support in a folder called Cache.
Also any folders associated with Illustrator CS 5 in the Application Support folder called Adobe.
Sorry I do not know where these folders are or if they are called the same thing on the windows platform.
And of course it is nowhere to be found on the web.
If you cannot find these files just trash the stuff you can after uninstalling and dumping the settings folder.
Yu can also do a search for Adobe Illustrator CS 5 on your computer after the uninstall there should be nothing related to Adobe Illustrator CS 5 left on the computer. I would also before doing any of this deactivate Illustrator CS 5.
The restart your computer.
BTW have you updated AI CS 5 and or Windows by any chance?

Illustrator cs3 headache! Error loading plugins. ColorHarmony.aip DxfDwg.aip FHImprot.ap PNGFileFormat.aip TracingSuite.aip TrcingUI.aip

I have searched everywhere on both the net and the adobe website and there is no solution for this problem. I have tried all suggestions, aside from reformatting my hard drive and loading everything from scratch. I have Adobe CS3 Master Collection which we paid quite a bit for and I find these errors and mistakes outrageous. I have a Zune and I still hve to disable the launch using the Vista Task Manager in order to get PDF files to save using any progrm within the suite.
All of a sudden one day, I started getting the following error: Error loading plugins. ColorHarmony.aip DxfDwg.aip FHImprot.ap PNGFileFormat.aip TracingSuite.aip TrcingUI.aip
I have tried using the CS3 Script clean up tool, even at level 2. I have gone through and got rid of any vestiges of folders or files that have to do with Adobe CS3 Master Collection. Nothing works. The only thing that did work that I refuse to do is to make another User Account and use that account just for Illustrator so I have to switch users back and forth to send e-mails and such.
What is the fix for this? Is Adobe paying attention?
Any words of wisdom? I have read that even after paying the $39.95 for help from Adobe, they still dont have a solution. Is t his a ploy to make some money off of fees during this economy?

Okay all, here is what I have tried; re-installed printer drivers,nothing, then:
I went to C:\Users\[your name]\AppData\Roaming\Adobe\Illustrator CS3 Settings on Win Vista.
Found the following folders: Brushes, Composite Fonts, Graphics Styles, Kinsoku, MojiKumi, New Document Profiles, Plug-ins, Swatches, Symbols, Workspaces. All folders were empty except for the New Document Profiles which had the following: Basic CMYK, Basic RGB, Mobile and Devices,
Print, Video and Film and Web, as I said these are document files which I deleted before this re-installation and nothing. Same error as above.
The three files listed in the Illustrator CS3 Settings folders are: AI Color Settings, AIMenuFaceCache and IllustratorFnt.lst. I deleted all three, IllustratorFnt.lst rebuilds immediately when I Open Illustrator CS3, however, the other two dont seems to rebuild until I receive the Microsoft Windows alert: a problem caused the program to stop working correctly. Windows will close the rpgoram and notify you if a solution is available. You'd think with the many times that this program has shut down automatically, someone would have a solution by now!
There is no AdobeFnt.lst file as specified by Mylenium.
corrupt preference folder, the whole users preference folder: I do not see an AI.Preferences folder in this area neither, and when I reopen Illustrator there is still no Preferences folder. Dont know how to get to the whole users preferences folder. I have a done Search for Preferences*.* and I only get entries for ACT! 2008 CMR which we have installed here.
corrupt Illustrator Settings folder located somewhere in the Documents and Settings No, this does not seem to do anything, If I delete the entire contents under Illustrator CS3 Settings.
a corrupt or conflicting plug in from a thrid party which is what it sounds like. Nothing in the plug-ins (Illustrator CS3 folder) and I haven't downloaded a third party. I do see the plugins that this mentioned in this error: ColorHarmony.aip DxfDwg.aip FHImprot.ap PNGFileFormat.aip TracingSuite.aip TrcingUI.aip in the following C: Program Files\Adobe\Adobe Illustrator CS3\Plugsin\Extensions, but the system will NOT let me remove them.
a corrupt font(s) or font data base(s) or both. Removed all possible fonts that the system would let me, and still nothing.
a corrupt color or monitor profile (this once happened to me) Do not use Custom monitor nor color profies.
a conflicting haxie running a PC
an update to something on your user account Hmmm all I have done are the recommended updates to Vista
conflicting software on the mac it is usually entourage or Quicken but they usually interfere with the keyboard shortcuts. On a PC.
and on the pc world of course a virus that is affecting your user account because it has only found your password on that accounts and which you obtained via browser or e-mail. Ran a full system virus scan and nothing.
The last and very unpopular amongst the pc world is a permissions problem in the pc world they always find a work around thuis issue rather than face the fact and why Adobe may have given up at this point. Turned off the UAC account, but your right, when I tried to delete the mentioned plugins in the errror, it said i didnt have the permissions.
There can be other reasons. The reason Adobe could not find it is the problem on the pc is often denial that this is user induced it also a problem but to less a degree on the Mac.
Maintaining your system is important. I do regular scans and things.
For instance have you set your scratch to a hard drive hat has a lot of free space do you have scratch other than your start up disk? Have a huge hard disk and 4 gb of DDR3 ram.
How much RAM do you have these are less likely to be the problem since the new user account works.
If you want to get his running again try a few things and tell us what did not work and perhaps we can help with nrrowing it down.
PLEASE HELP YOU GUYS, THIS IS VERY BIZARRE, WHY WOULD ONE SEPARATE USER ACCOUNT WORK AND THE OTHER NOT. THEY BOTH PULL OFF OF THE SAME PROGRAM FILE FOLDER RIGHT?

Error Loading Plugins - CS2

My Illustrator won't completely load. After about 30 seconds the computer freezes. I have a pc with vista. I believe illustrator worked two years ago when I got this computer. Installed it right after I got it. I think it worked after I got this computer. Error message is:
Error Loading Plugins
ScriptingSupport(2).aip
ScriptingSupport(3).aip
Help!

Those two files are suspect.
In my AI 12 (CS2) installation, there is only one scripting support plug-in file: ScriptingSupport.aip. It is located in the [program installation folder]\Plug-ins\Extensions folder.
If those two files (ScriptingSupport(2).aip and ScriptingSupport(3).aip) are in the same folder, I would just pull them off to your desktop. If, then, Illustrator starts up OK, and everything checks out, you can trash them.
The question, of course, would be how they got there in the first place. Numbered files like that usually indicate multiple attemps to create them -- perhaps from multiple abortive re-installation attempts.
There might be other issues (e.g. permissions-related). See these other previous discussions (although, unfortunately many of the contained links no longer work in these horrible new forums):
http://forums.adobe.com/message/1274034#1274034
http://forums.adobe.com/message/1274987#1274987
http://www.adobe.com/support/products/pdfs/adobe_products_and_windows_vista.pdf

Error loading OS/400 PASE program R3trans

Similar Messages

Maybe you are looking for