Error loading template 0TPLB_0CSAL_C01_Q0021_1

Dear all,
I am running BI 7.0 for 2 years and implementing CRM in a separate server now. We have CRM Web UI set up and has using links to BI reports.
It is frustrated since most links are using BW 3.X template and I am running BI 7.0 so I have to trace and install BW 3.x BI-CONTENT in 7.0 system. I was able to track down the data source of business content in CRM side and the data source, DSO, infocube, query and webtemplate in BI side. I ran through the CRM interactive reporting configuration guide (C41) and BI Connectivity (B84). I am sure the connection is setup between CRM and BI and the data source from the both sides are activated. I test and the web template 0TPLB_0CSAL_C01_Q0021_is working from BI side. I also added the web template in SPRO - CRM -> CRM analytics -> Define BI report in CRM.
However, when I click on the report - customer report with open activities from CRM Web UI and am getting the error -Error loading template 0TPLB_0CSAL_C01_Q0021_1. is anything I need to setup so I can pull the web template in CRM from BI?
The only thing I confuse which is BWA5. For example, the data sources for 0TPLB_0CSAL_C01_Q0021_1 is 0CRM_CONTACT_OUT at RSA5 and I don't see 0CRM_CONTACT_OUT in BWA5. Do I need to create one in BWA5?
Please help. Thanks.

Lado
Did you solved the problem..Could you please let me know the procedure if you have solved. Because Iam facing the same problem after doing the same steps said by you.
Thanks

Similar Messages

Key figure definition in BEx gives "Error loading template 0QUERY_TEMPLATE"

Hi,
On a BI 7.0 system I try to run a query in the BEx Analyzer and after I have the result in Excel. I wants to see the key figure definition by right clicking in a data cell.
Then I get this error message after the browser has started up.
Error loading template 0QUERY_TEMPLATE
Notification Number BRAIN 276
Any ideas how this can be?
Kind regards, Bjarne

hi,
Please check the below path in BI and set the template "0ANALYSIS_PATTERN" there:
SPRO ->SAP Netweaver -> BI ->Settings for reporting and analysis ->BEX Web -> Set Standard Web Templates -> Ad-hoc analysis -> set the above template and save it.
check wether it works afterwords or not.
This is the standard web template called every time when we execute our query's.
Thanks
Dipika

Web UI Client - Error Loading template 0TPLB_MKTG_C01_Q0001_V01

Hi
Please can any one help on this below error
Error Loading template 0TPLB_MKTG_C01_Q0001_V01
I have activated the Template in BI Content and able to check the same in WAD and also in RS Template Maintain in BI system.
But as soon as i go to CRM Web UI portal and click on that link its saying Error Loading template 0TPLB_MKTG_C01_Q0001_V01.
I have also given the settings in CRM SPRO --> Display SAP BI Netweaver Reports --> Given the Web Template id, but still iam not able to get the template worked..
Could any one of you suggest.
Thanks in advance

Hi Amit,
Can u pls help us in knowing solution if u have fixed this issue.
Thanks,
Ravi

BEx Broadcasting : Error loading template 0BROADCASTING_TEMPLATE

Hello Everybody,
When i go to Business Explorer - Web Application Designer - Publish and click on In BEx Broadcaster ,an error message is displayed when this is loaded saying :
<b>Error loading template 0BROADCASTING_TEMPLATE</b>
When I tried installing 0BROADCASTING_TEMPLATE an error message was displayed as :
<b>Object Web Template Name 0BROADCASTING_TEMPLATE is not available in version D</b>
This means that 0BROADCASTING_TEMPLATE is not available in delivered version .
Is this any other way to install this template or can this template be separately installed,if yes plz tell me how to do it.If this template cannot be installed separately then,is there no other way to activate BEx broadcasting functionality in BW .Kindly revert back at earliest as I am suffering with this issue since many days.my Email Id is [email protected] .
Thanks,
Saumya

Hi,
Sorry for bothering you - see SAP Note 861803 if of any help.
Symptom
In a BW 3.5 system, you want to define the Standard Web Templates and you call Transaction RSCUSTV11 to do this, however the system displays only the fields "Style sheet" and "Template properties".
Other terms
RSCUSTV11, RSCUSTV21, 0QUERY_TEMPLATE, 0ADHOC, 0BROADCASTING_TEMPLATE, 0ANALZYER, 0QUERY_TEMPLATE_BROADCASTING, 0DOC_TEMPLATE2, standard Web template
Solution
In a BW 3.5 system, use Transaction RSCUSTV21 to maintain the Standard Web Templates.
regards
Vikash

Error loading template 0BROADCASTING_TEMPLATE

Hello Everybody,
When i go to Business Explorer - Web Application Designer - Publish and click on In BEx Broadcaster ,an error message is displayed when this is loaded saying :
Error loading template 0BROADCASTING_TEMPLATE
Can somebody plz tell why BEx Broadcaster is not loaded and wt is the cause of this error and wt configurations need to be made inorder to make BEx Broadcaster function properly.If somebody can send a configuration guide related to this,it shall be of gr8 help,my Email Id is
[email protected] .Kindly plz revert at earliest as i need this issue to be resolved urgently.
Regards,
Saumya

Hello Arun,
I installed 0BROADCASTING_TEMPLATE and after installation following results are shown:
@5B\QInformation@Installation of: Web Template Name (TMPL)
@5D\QWarning@     Object Web Template Name 0BROADCASTING_TEMPLATE is not available in version D
@5B\QInformation@     Transfer/Merge of the Content Version (Object Type Web Template Name )
@5B\QInformation@     Activation of Objects with Type Web Template Name
@5B\QInformation@     Saving Objects with Type Web Template Name
@5B\QInformation@     Saving Web Template Name 0BROADCASTING_TEMPLATE
@5B\QInformation@     Error saving Web Template Name 0BROADCASTING_TEMPLATE
@5B\QInformation@     Transferring the 1 objects from type TMPL took 0.2 seconds
@5B\QInformation@     Post-processing of Objects after activation
@5B\QInformation@     The post-processing lasts 0.0 seconds
In all this it shows Installation of 0BROADCASTING_TEMPLATE as a warning .Does this means that installation is successful,bcoz now also when i open BEx Broadcaster same error message is displayed.Do i need to restart the server.If you could send me ur Email Id then i wll send you screenshot of results there ,as this is not very clear from here.
Kindly revert back at earliest.
Thanks,
Saumya

BI Administration Cockpit loading Template Error

Hi
I get an error loading a template such as 0TPL_PORTAL_EVENT_LISTENER (Notification Number BRAIN 276). It is needed for displaying Long-Term Trends in Total Runtimes of BI Application Objects.
How to make sure the template mentioned in the error message is installed in
business content?
I used nwa for deploying template, so I supposed that's it was included.
Thanks for Help.

Thanks for your reply.
It seems I am missing some BI Content because the template is not in there.
I am at the current SAP patch levels
SAP_BW release 7 level 11
BI_CONT release 703 level 4
Everything I have read say that I should be fine at this point but the only thing I can think of is taking it to level 13 for SAP_BW.
Any other suggestions are appreciated.
Thanks

JQuery Mobile template: Error Loading Page

Hello Apex community,
My name is Robert and this my first post on this forum. I've been developing with Oracle Apex for over a year now.
I've recently started developing for mobile devices with Oracle Apex 4.2.
However i stumble on serveral problems including the one I will describe here:
The problem is best described by this screenshot:
[ http://roberthantink.com/img/Error_loading_page.JPG]
Whenever I log into my JQuery template based application which uses 'Application Express Accounts' as authentication.
I get the following Error: "Error Loading Page".
When inspecting with a development tool I only get this warning:
"The page at https://apex***********.com/nbb/f?p=100:LOGIN_JQM_SMARTPHONE:5788626446201 displayed insecure content from http://apex*******.com/nbb/f?p=100:101:0:::::."
Page 101 is de login page and after the login it should redirect to Home which is page 1. This is all default.
The weird thing is I can log into the application if I am on our company's local network.
And I can also log into the workspace from outside our network, but I cannot get in the Application.
I've also made a 'Sample Database Application' which I can log into from anywhere.
I've searched this forum and of course the internet and could not find anything on this subject.
I hope my explanation is clear enough and that someone could help me out.
Edited by: Robert Hantink on 5-dec-2012 11:09
Edited by: Robert Hantink on 5-dec-2012 11:10

So here is the update.
I've checked my themes/templates/pages for hardcoded HTTP/HTTPS and didn't find anything.
I also inspected and compared the website from inside our network and outside and could not find anything out of the ordinary.
Because this problem only occurses when i use the JQuery Mobile template I also compared the JQuery template with a Normal template.
The only thing i noticed besides the different scripts that are found in the <head>tag, is the <base> tag :
<base href="http://*****************.com:8080/nbb/f?p=100:10:13950022358106::NO:::">
This tag is only used in the mobile template.
I have also used the firebug network function and i noticed that when the site is used from outside our network that there is no response to a POST.
I've uploaded some screenshots to make things clear.
This is what happens from inside our network when i click on the SUBMIT-button "test" :
http://roberthantink.com/img/intern1.JPG
http://roberthantink.com/img/intern2.JPG
Everything just works and the answer to the POST is a html site.
However if i do the same thing from outside our network this is what happens:
http://roberthantink.com/img/extern1.JPG
http://roberthantink.com/img/extern2.JPG
The next thing I'm about to check is our webcache and our firewall.
Because the current port that is used is 443 and maybe we need 8080 and 8181 as well.
Hope this gives you more of an insight of what is going on.
Let me know if you need more information.
Thanks a million so far!!!

Error loading transcode preset (yes I know, again, but please read)

I am new to most of the Adobe products and recently purchased Adobe creative suite cs4 master. I make slide shows, haven't tried any video yet. I am making a several-disc large set of slideshows of a European vacation for a friend of mine. There were roughly 2000 pictures, most of which I edited in Photoshop.
I built the slideshows in Encore and burned the first three DVD's no problem. They play well on a dvd player attached to a TV. The current DVD I'm trying to burn gives me the message "Error Loading transncode preset. I have spent many hours researching this online, and I do some some references and fixes for it here on this forum. However they are not working for me. I went back and looked at my DVD's that burned properly and tried to make everything the same, but I still get the same message.
The first couple of tries, the burn process always stopped when loading the same song, so I removed it and put a different one in. This project has 4 slideshows in it, about 10 songs and nothing else.
I have a Dell Precision T3400 and am using XP Pro service pack 3. It has Intel(R) Core (TM) Quad CPU, Q6600 @ 2.4 GHz with 2.39 GHz 3.00 GB RAM. I have Creative SB XFI sound and MVidia Quadro FX 1700 video. I dont know what else you need in the way of documentation.
I have rebuilt this whole project once already and now I still cant burn it from the second build.
I know this question has been asked already, but I tried one of the suggestions about removing the stuff in the Source Folder which didn't work for me. I don't understand some of your complex terminology but I am willing to learn anything.
Is there someone who would adopt a newbie and help me wade through some of the terminology I haven't picked up yet? I'm a quick learner and am building my own terminology dictionary as I go.
Thank you for listening. I hope you can help.

Here is more information about my Encore slideshows. The DVD I'm trying to make has 5 slideshows in it, no timelines and no playists. Each of the slide shows have between 55 and 75 jpeg images in them and between 1 and 3 wma or mp3 music files in each one. There are more .wma than .mp3 music files, and many of them I first edited in Soundbooth to make it exactly the same length since it is going into a slideshow and not a timeline. The lwma files I try to remember to save as mp3 files thinking they would be easier to transcode. Honestly I know so very little about transcoding that it's virtually impossible to help myself with that. I have yet to find a good tutorial on that.
Regarding the images in all the slideshows, they are all jpg files and are mostly 600x800 in size. Most of them are 95kb or less in size. They were taken with the same camera except for a very few, less than 1% that I added for effect. One image that I just looked at is 180 ppi. I didnt create it that way, because I dont know how. The size in inches of the images are around the area of 7.8 inches x 6.7 inches. The mode is RGB.
Regarding linking, I set the menu, which is an encore template and have used the same menu for all DVD's, as first play object and then link the menu to the first slide show, each slideshow to the next, and have end action of the last slideshow returning to the menu. I have kept this as simple as possible because I'm new to Encore and most of the CS4 master suite. My plan is to learn Premiere Pro and do the slideshows there but wanted to get this big one done as quickly as possibly. I edited most of the 2000 images all in Photoshop so it has been a timely process.
I am unable to open this project anymore without getting an error message saying "[..\..\Src\Clip\VideoClip.cpp-275]" This happened after I tried the suggestion to delete everything out of the transcode folder for this project. I did that, but when I reopened my project, it didnt ask me to locate any files and only gave me the above error. When I click on on the error, Encore crashes. So I cant do the screen shots of my project.
I'll be glad to add any information I inadvertently left out. Thank you in advance for any help you can give me.
Ginny

Migration From 10.1.2 to 10.1.3.1.26 (licensed version) - ERROR loading tem

Made it through the upgrade to step 11 in the release notes instructions. The step is as follows:
======
Run the JHeadstart Application Generator. If you have a group with a shuttle layout in your application definition, you will get an error. See the section Migrating Shuttle Functionality for more info on how to fix such an error. Note that some of the generator switch checkboxes might have been unchecked in 10.1.2. These settings are migrated as is, so you might need to check these generator switch checkboxes again. The JHeadstart log window displays warnings about files not generated because of such settings.
======
I don't have a shuttle in my application.
No matter what I do I get the following error in the log window when I RUN the JHS app generator:
Error while loading template bindings property file: java.io.FileNotFoundException: C:\ClaimDemo6\ViewController1013\templates\config (Access is denied)
I'm stuck and I can't go any further! What am I missing?
Message was edited by:
user565025

You did nothing wrong. Some changes from 10.1.3.0 to 10.1.3.1 introduced this issue. We will fix it with the next service update.
To work around it, you can do the following:
- open the application definition editor
- select the service node
- click the templates tab
- enter "defaultTemplateBindings.jtp" as the value for property "Template Binding File (.jtp)".
Steven Davelaar,
JHeadstart Team.

Error loading item from WAD

Hello,
I have problems with loading template from WAD to Browser.
I created the template and then pushed the button Execute in the browser. I can see only message: Error Loading item*
Can you help me pleas.
Thanks
Petr

Hello,
I created the template with one table, saved and executed in browser and I have again problem with loading item.
My problem has longer history, because I worked on BWT system normally(I created many templates and I had no problems with loading items) a one day I started to work and I saw this error message. Now I can´t execute any templates (inclusive of all that worked correctly before)
It´s possible that I made some change in WAD settings but I don´t know where....
Thanks
Petr

Error loading item WEBITEM_1

Hi all,
I am getting an error in the EP which says "Error loading item WEBITEM_1."
What exactly is this error and how do we resolve it?
Any help would be greatly appreciated.
Thanks,

Hi,
I think you'll get the name of the web template or report from the Iview properties. You'll be providing the Query string or Web Template name while creating the Iviews. I don't know where exactly is this option. Just check whether you can find the name of the web template. Then open this web template in Web application designer and execute it. See if this error occurs while executing from WAD.
Regards
Hari
Message was edited by: Hari Krishnan K

Error message when starting Adobe Illustrator CC [Error loading plugins AppBarControls.aip]

Hello,
I get the following error message when I start Adobe Illustrator CC.
Error loading plugins
AppBarControls.aip
Then it gives me the option to continue by clicking okay. When it opens, the Application Bar is just blank.
I've tried uninstalling, then ran Adobe CC Cleaner, then downloaded and reinstalled.
Computer details : OS X 10.9.5, 1.3 GHz Intel Core i5, 8 GB 1600 MHz DDR3
Help is kindly appreciated!

I also have had a difficult time with Adobe Illustrator CC 2014 crashing upon launch. The support staff was great even though we had to work through several sessions. Below is the email explaining our final session.
This email is in regards with the issue you had been facing with Illustrator CC 2014.
While going through the installer logs, we found that there was an issue with the installation & the program installer had been denied access to several critical files & folders during installation.
This was the main reason for Illustrator crash as several critical components had not been installed properly.
We tried installing the program in a new user account & that worked.
Though the program has been installed properly now & is working in your old account, I will still strongly recommend you to get your computer user account repaired with a Windows 7 operating system diskette.
This is required so that you do not run into more trouble later while working with the Adobe Applications or even while installing other programs.
Avanish Divya was the final support person that successfully resolved my problems.

Having problems with Bridge shutting down after saving photo in PS Cs5,,,,,,,,, Also when i attempt to update either PS or bridge get an error message in Adobe application manger "Error loading updater workflow"

Having problems with Bridge shutting down after saving photo in PS Cs5,,,,,,,,, Also when i attempt to update either PS or bridge get an error message in Adobe application manger "Error loading updater workflow"

Sorry for the late reply. My email firewall has become a little over zealous & sent a lot of my emails straight to my junk email folder, so I have only just now discovered your reply in my junk mail folder.
The only "don't open files exceeding xxx megabytes" instruction I can find in my Prefs, is in the Bridge Prefs for Thumbnails, & mine is set at 1000mb. The biggest files I handle are bigger than 200mb so I should be able to open a few, not just one.
However, this doesn't explain why I can open a psd format file of 180mb, close it, but then can't open a RAW format file of only 26mb immediately after.
I can open the RAW file only if I restart my computer - very annoying!
However, thanks for the advice about the video card & memory.
So, I'm still stuck as to what the issue is.

Cannot install Firefox. WHen I click on the link to install, it takes me to an "error loading page" notice. My network connection and internet access are normal with Internet Explorer, so this is not the issue. Some kind of conflict with my settings or pe

Cannot install Firefox. When I click on the link on the Mozilla website, it goes to an "error loading page". My network connection and Internet Explorer are fuctioning normally.
== computer was recently wiped clean and am now reinstalling all previous software and applications ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; .NET CLR 1.1.4322; .NET CLR 2.0.50727)

None of the stuff in " http://kb.mozillazine.org/Locked_or_damaged_places.sqlite " helps. I have tried and tried and I have even wipe the computer clean still didn't help. I got the same problem as he/she has got in the first posted. Can add some web pages but not all the web pages I want.. I should have never updated to 3.6.13... That's when it all started for me, from that version..... Now Version 3.6.14 is out, I was hoping the version 3.6.14 might would fix the problem wrong again....
Funny thing is i can not even Bookmark Firefox.com!!!!!...lol
So any ideas on how to fix it other than the link giving would help.
Thanks.

'Error loading plugin: Plugin file not found' message on ONLY 5 sites, but all others OK. Help, please!

Hi Again!
I posted this problem here before, but since I really need to access the sites that receive this error message in less than a month, I had to re-post; hopefully someone who didn't see it before will see it & have a solution for me.
Here are the details: I'm running windows 8.1 & I use Firefox 33.1.1, Pale Moon 25.1.0 or Opera 26.0 as my browsers, (I have IE installed & up-to-date, but I never use it). I followed the 10-point checklist on Adobe & everything was done, except for "uncheck Hardware Acceleration" in Flash 'Settings'; I tried to uncheck it on this site, where it's indicated, as well as in my 4 browsers when I'm doing something that uses Flash, but no matter how hard I try, I can't 'uncheck' the check mark in that tiny box! Since this error problem only affects 5 web sites, & I can watch streaming media on all other sites, I don't think it's an issue.
Here's how this problem began: I was watching a live, streaming nest-cam on 5/09/14 around 11:00AM, (yes, I DO know the exact time & date, because it happened so suddenly while I was watching this website that I'd been watching since the end of February, 2014), when my screen went black. I thought it was probably an Adobe Crash, but when the usual Crash Report window didn't show up, I just closed Firefox & reopened it, expecting to resume watching the nest-cam. When I went back to the site, I got the black screen with the "Error loading plugin: Plugin file not found" message. The chat portion on the site still works, though. I know there are other sites with this nest-cam feed, so I started trying them, but it took several tries for me to find one that didn't get the error message! I posted this problem on "Windows BBS" forum, & someone else posted that the same thing happened to them AND on the same sites! They didn't have a solution, either. I cleared my cache, rebooted my PC & even did a System Restore, but whatever happened in that brief second made using ONLY 5 sites impossible. Here are the sites that receive the error message:
http://pixcontroller.com/eagles, (but I CAN go to http://pixcontroller.com, but there isn't any streaming media)
http://cbslocal.com/eagles
http://westmorelandconservancy.org/BlueBirdwebcam-1.htm
http://wildearth.tv/cam/pittsburgh-bald-eagles, (I get the error message on ALL cams on this site)
http://aviary.org/BE-NestCam1 (I get the error message on ALL cams on this site)
Now if any videos from the 5 websites above are uploaded to YouTube, I can watch them perfectly...no error message if I watch the videos elsewhere. Luckily, I found Ustream, & they have most of the nest cams I watch, but I need to fix this issue, because it's nearing nesting time! I'm an amateur nest-watcher & it's vital that I have access to these 5 sites, so if anyone knows how to fix this, PLEASE tell me!
Thanks for taking the time to read my post.
All suggestions/solutions are gratefully accepted.
Thanks in advance for your help!
DogPal

File Not Found Error in Welcome Screen
07-Nov-2013 10:25
Tags: #dreamweaver_cs6_update
Help please!
Live preview also not working.
I have exactly the exact problem described below but do not have a folder with the same name as the volume created under the volume. Please can someone help - I've tried everything. This problem only happened when I upgraded to Dreaweaver CC!
"On launching Dreamweaver on your Macintosh if your Welcome Screen is not loading and if you see a "File not found" error, please check if you have a folder with the same name as your volume created under the volume. For more info on this please go through the attached pdf document. Other dialogs/panels in dreamweaver that will be blank due to this issue are Jquery Swatches panel, Adobe Edge Webfonts tab in Manage Fonts dialog,W3c Error Info dialog, Externalise Javascript dialog and svn revert dialog. After following the changes mentioned in the attached document please check all the affected dialogs/panels to confirm everything is working as expected."
Thanks,
Martin Bond
[personal information removed by moderator]

Error loading template 0TPLB_0CSAL_C01_Q0021_1

Similar Messages

Maybe you are looking for